diff options
| author | hathach <[email protected]> | 2026-07-16 14:11:43 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2026-07-17 17:32:47 +0700 |
| commit | e5b47c9306471b41bd2d2ecbbe9ea8932028b380 (patch) | |
| tree | 3ea83fb2b0e91fd4307387f0ed78e98a95e0f574 /examples/device/webusb_serial/src/main.c | |
| parent | b9478a723b6335f3e670453b622d615cebbd7293 (diff) | |
skill: add usb-sniffer — wire-level capture with the ataradov hardware tap
Fourth view in the USB debugging toolset (usbmon = host URBs, usb-debug =
host reasoning, usb-target-debug = device firmware, usb-sniffer = what
actually crossed D+/D-). Covers the ataradov/usb-sniffer analyzer:
headless pcapng capture (--speed ls/fs/hs, --fold, --limit self-exit),
Wireshark/tshark analysis recipes, and the wire realities that bite:
downstream broadcast, sniffer self-capture noise, xHCI devnum != wire
address, tap-point-dependent reset visibility (hub choreography anchors),
FS-behind-HS-hub splits. Every recipe hardware-validated on the rig,
including the capture-window floor (a 3 s window provably misses the
enumeration ladder; 3M packets minimum).
Two udev files with distinct audiences, not one:
- examples/device/99-tinyusb-examples.rules (renamed from 99-tinyusb.rules):
the user-facing rules the examples need — cafe VID access, hidraw, the
ModemManager blacklist, a couple of board probes. getting_started.rst,
the webusb_serial README and its source comment point here.
- tools/88-tinyusb.rules: the HIL rig's private probe/analyzer allowlist,
now with the sniffer (6666:6620 + blank FX2LP 04b4:8613). Installed on
the rig only; the usb-sniffer skill references it.
Diffstat (limited to 'examples/device/webusb_serial/src/main.c')
| -rw-r--r-- | examples/device/webusb_serial/src/main.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/examples/device/webusb_serial/src/main.c b/examples/device/webusb_serial/src/main.c index 4be5e4db4..e200c334c 100644 --- a/examples/device/webusb_serial/src/main.c +++ b/examples/device/webusb_serial/src/main.c @@ -39,7 +39,7 @@ * is done automatically by firmware. * * - On Linux/macOS, udev permission may need to be updated by - * - copying '/examples/device/99-tinyusb.rules' file to /etc/udev/rules.d/ then + * - copying 'examples/device/99-tinyusb-examples.rules' file to /etc/udev/rules.d/ then * - run 'sudo udevadm control --reload-rules && sudo udevadm trigger' */ |