Merge branch 'master' into async_io

Signed-off-by: HiFiPhile <[email protected]>

10 files changed, 155 insertions, 276 deletions

diff --git a/examples/device/audio_4_channel_mic/src/main.c b/examples/device/audio_4_channel_mic/src/main.c
index e8c40309e..f78e48f0c 100644
--- a/examples/device/audio_4_channel_mic/src/main.c
+++ b/examples/device/audio_4_channel_mic/src/main.c
@@ -69,13 +69,8 @@ uint8_t clkValid;
 audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
 audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-// Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2
-uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000/CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO];
-#else
 // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3
 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000];
-#endif
 
 void led_blinking_task(void);
 void audio_task(void);
@@ -106,27 +101,6 @@ int main(void)
   sampleFreqRng.subrange[0].bRes = 0;
 
   // Generate dummy data
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  uint16_t * p_buff = i2s_dummy_buffer[0];
-  uint16_t dataVal = 0;
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH0 saw wave
-    *p_buff++ = dataVal;
-    // CH1 inverted saw wave
-    *p_buff++ = 3200 + AUDIO_SAMPLE_RATE/1000 - dataVal;
-    dataVal+= 32;
-  }
-  p_buff = i2s_dummy_buffer[1];
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH3 square wave
-    *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 3400:5000;
-    // CH4 sinus wave
-    float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
-    *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
-  }
-#else
   uint16_t * p_buff = i2s_dummy_buffer;
   uint16_t dataVal = 0;
   for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
@@ -142,7 +116,6 @@ int main(void)
     float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
     *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
   }
-#endif
 
   while (1)
   {
@@ -195,15 +168,7 @@ void audio_task(void)
   uint32_t curr_ms = board_millis();
   if ( start_ms == curr_ms ) return; // not enough time
   start_ms = curr_ms;
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  // Write I2S buffer into FIFO
-  for (uint8_t cnt=0; cnt < 2; cnt++)
-  {
-    tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX);
-  }
-#else
   tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX);
-#endif
 }
 
 //--------------------------------------------------------------------+
diff --git a/examples/device/audio_4_channel_mic/src/tusb_config.h b/examples/device/audio_4_channel_mic/src/tusb_config.h
index 46484f847..446a7a32a 100644
--- a/examples/device/audio_4_channel_mic/src/tusb_config.h
+++ b/examples/device/audio_4_channel_mic/src/tusb_config.h
@@ -115,26 +115,11 @@ extern "C" {
 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
 #define CFG_TUD_AUDIO_EP_SZ_IN                        TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)
 
-#define CFG_TUD_AUDIO_ENABLE_ENCODING                 1
 #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL              1
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          CFG_TUD_AUDIO_EP_SZ_IN
-
-#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING          1
-#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
-#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
-#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ       (TUD_OPT_HIGH_SPEED ? 32 : 4) * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Example write FIFO every 1ms, so it should be 8 times larger for HS device
-
-#else
-
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device
 
-#endif
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c
index c9de4029a..99278b5cc 100644
--- a/examples/device/audio_4_channel_mic_freertos/src/main.c
+++ b/examples/device/audio_4_channel_mic_freertos/src/main.c
@@ -105,13 +105,8 @@ uint8_t clkValid;
 audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1]; 			// Volume range state
 audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-// Audio test data, each buffer contains 2 channels, buffer[0] for CH0-1, buffer[1] for CH1-2
-uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO][CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000/CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO];
-#else
 // Audio test data, 4 channels muxed together, buffer[0] for CH0, buffer[1] for CH1, buffer[2] for CH2, buffer[3] for CH3
 uint16_t i2s_dummy_buffer[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX*CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE/1000];
-#endif
 
 void led_blinking_task(void* param);
 void usb_device_task(void* param);
@@ -132,27 +127,6 @@ int main(void)
   sampleFreqRng.subrange[0].bRes = 0;
 
   // Generate dummy data
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  uint16_t * p_buff = i2s_dummy_buffer[0];
-  uint16_t dataVal = 0;
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH0 saw wave
-    *p_buff++ = dataVal;
-    // CH1 inverted saw wave
-    *p_buff++ = 3200 + AUDIO_SAMPLE_RATE/1000 - dataVal;
-    dataVal+= 32;
-  }
-  p_buff = i2s_dummy_buffer[1];
-  for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
-  {
-    // CH3 square wave
-    *p_buff++ = cnt < (AUDIO_SAMPLE_RATE/1000/2) ? 3400:5000;
-    // CH4 sinus wave
-    float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
-    *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
-  }
-#else
   uint16_t * p_buff = i2s_dummy_buffer;
   uint16_t dataVal = 0;
   for (uint16_t cnt = 0; cnt < AUDIO_SAMPLE_RATE/1000; cnt++)
@@ -168,7 +142,6 @@ int main(void)
     float t = 2*3.1415f * cnt / (AUDIO_SAMPLE_RATE/1000);
     *p_buff++ = (uint16_t)((int16_t)(sinf(t) * 750) + 6000);
   }
-#endif
 
 #if configSUPPORT_STATIC_ALLOCATION
   // blinky task
@@ -269,15 +242,7 @@ void audio_task(void* param)
   // Here we simulate a I2S receive callback every 1ms.
   while (1) {
     vTaskDelay(1);
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-  // Write I2S buffer into FIFO
-    for (uint8_t cnt=0; cnt < 2; cnt++)
-    {
-      tud_audio_write_support_ff(cnt, i2s_dummy_buffer[cnt], AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX);
-    }
-#else
     tud_audio_write(i2s_dummy_buffer, AUDIO_SAMPLE_RATE/1000 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX);
-#endif
   }
 }
 
diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
index 5cd93b0d6..5ac51b153 100644
--- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
+++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h
@@ -121,26 +121,11 @@ extern "C" {
 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX            4         // This value is not required by the driver, it parses this information from the descriptor once the alternate interface is set by the host - we use it for the setup
 #define CFG_TUD_AUDIO_EP_SZ_IN                        TUD_AUDIO_EP_SIZE(CFG_TUD_AUDIO_FUNC_1_SAMPLE_RATE, CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX, CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX)
 
-#define CFG_TUD_AUDIO_ENABLE_ENCODING                 1
 #define CFG_TUD_AUDIO_EP_IN_FLOW_CONTROL              1
 
-#if CFG_TUD_AUDIO_ENABLE_ENCODING
-
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
-#define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          CFG_TUD_AUDIO_EP_SZ_IN
-
-#define CFG_TUD_AUDIO_ENABLE_TYPE_I_ENCODING          1
-#define CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX      2         // One I2S stream contains two channels, each stream is saved within one support FIFO - this value is currently fixed, the driver does not support a changing value
-#define CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO        (CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX / CFG_TUD_AUDIO_FUNC_1_CHANNEL_PER_FIFO_TX)
-#define CFG_TUD_AUDIO_FUNC_1_TX_SUPP_SW_FIFO_SZ       (TUD_OPT_HIGH_SPEED ? 32 : 4) * (CFG_TUD_AUDIO_EP_SZ_IN / CFG_TUD_AUDIO_FUNC_1_N_TX_SUPP_SW_FIFO) // Example write FIFO every 1ms, so it should be 8 times larger for HS device
-
-#else
-
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX             CFG_TUD_AUDIO_EP_SZ_IN
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ          (TUD_OPT_HIGH_SPEED ? 32 : 4) * CFG_TUD_AUDIO_EP_SZ_IN // Example write FIFO every 1ms, so it should be 8 times larger for HS device
 
-#endif
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/examples/device/cdc_msc/src/msc_disk.c b/examples/device/cdc_msc/src/msc_disk.c
index 6fc0760b6..458681f58 100644
--- a/examples/device/cdc_msc/src/msc_disk.c
+++ b/examples/device/cdc_msc/src/msc_disk.c
@@ -40,17 +40,15 @@ static bool ejected = false;
 If you find any bugs or get any questions, feel free to file an\r\n\
 issue at github.com/hathach/tinyusb"
 
-enum
-{
-  DISK_BLOCK_NUM  = 16, // 8KB is the smallest size that windows allow to mount
+enum {
+  DISK_BLOCK_NUM = 16,// 8KB is the smallest size that windows allow to mount
   DISK_BLOCK_SIZE = 512
 };
 
 #ifdef CFG_EXAMPLE_MSC_READONLY
 const
 #endif
-uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
+uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = {
   //------------- Block0: Boot Sector -------------//
   // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
   // sector_per_cluster = 1; reserved_sectors = 1;
@@ -59,60 +57,59 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
   // drive_number       = 0x80; media_type = 0xf8; extended_boot_signature = 0x29;
   // filesystem_type    = "FAT12   "; volume_serial_number = 0x1234; volume_label = "TinyUSB MSC";
   // FAT magic code at offset 510-511
-  {
-      0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
-      0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T' , 'i' , 'n' , 'y' , 'U' ,
-      'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
+{
+    0xEB, 0x3C, 0x90, 0x4D, 0x53, 0x44, 0x4F, 0x53, 0x35, 0x2E, 0x30, 0x00, 0x02, 0x01, 0x01, 0x00,
+    0x01, 0x10, 0x00, 0x10, 0x00, 0xF8, 0x01, 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x29, 0x34, 0x12, 0x00, 0x00, 'T', 'i', 'n', 'y', 'U',
+    'S', 'B', ' ', 'M', 'S', 'C', 0x46, 0x41, 0x54, 0x31, 0x32, 0x20, 0x20, 0x20, 0x00, 0x00,
 
-      // Zero up to 2 last bytes of FAT magic code
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    // Zero up to 2 last bytes of FAT magic code
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA
-  },
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xAA},
 
   //------------- Block1: FAT12 Table -------------//
-  {
-      0xF8, 0xFF, 0xFF, 0xFF, 0x0F // // first 2 entries must be F8FF, third entry is cluster end of readme file
+{
+      0xF8, 0xFF, 0xFF, 0xFF, 0x0F// // first 2 entries must be F8FF, third entry is cluster end of readme file
   },
 
   //------------- Block2: Root Directory -------------//
-  {
-      // first entry is volume label
-      'T' , 'i' , 'n' , 'y' , 'U' , 'S' , 'B' , ' ' , 'M' , 'S' , 'C' , 0x08, 0x00, 0x00, 0x00, 0x00,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-      // second entry is readme file
-      'R' , 'E' , 'A' , 'D' , 'M' , 'E' , ' ' , ' ' , 'T' , 'X' , 'T' , 0x20, 0x00, 0xC6, 0x52, 0x6D,
-      0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
-      sizeof(README_CONTENTS)-1, 0x00, 0x00, 0x00 // readme's files size (4 Bytes)
+{
+    // first entry is volume label
+    'T', 'i', 'n', 'y', 'U', 'S', 'B', ' ', 'M', 'S', 'C', 0x08, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x6D, 0x65, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    // second entry is readme file
+    'R', 'E', 'A', 'D', 'M', 'E', ' ', ' ', 'T', 'X', 'T', 0x20, 0x00, 0xC6, 0x52, 0x6D,
+    0x65, 0x43, 0x65, 0x43, 0x00, 0x00, 0x88, 0x6D, 0x65, 0x43, 0x02, 0x00,
+    sizeof(README_CONTENTS) - 1, 0x00, 0x00, 0x00// readme's files size (4 Bytes)
   },
 
   //------------- Block3: Readme Content -------------//
@@ -121,23 +118,21 @@ uint8_t msc_disk[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
 
 // Invoked when received SCSI_CMD_INQUIRY
 // Application fill vendor id, product id and revision with string up to 8, 16, 4 characters respectively
-void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4])
-{
+void tud_msc_inquiry_cb(uint8_t lun, uint8_t vendor_id[8], uint8_t product_id[16], uint8_t product_rev[4]) {
   (void) lun;
 
   const char vid[] = "TinyUSB";
   const char pid[] = "Mass Storage";
   const char rev[] = "1.0";
 
-  memcpy(vendor_id  , vid, strlen(vid));
-  memcpy(product_id , pid, strlen(pid));
+  memcpy(vendor_id, vid, strlen(vid));
+  memcpy(product_id, pid, strlen(pid));
   memcpy(product_rev, rev, strlen(rev));
 }
 
 // Invoked when received Test Unit Ready command.
 // return true allowing host to read/write this LUN e.g SD card inserted
-bool tud_msc_test_unit_ready_cb(uint8_t lun)
-{
+bool tud_msc_test_unit_ready_cb(uint8_t lun) {
   (void) lun;
 
   // RAM disk is ready until ejected
@@ -152,29 +147,24 @@ bool tud_msc_test_unit_ready_cb(uint8_t lun)
 
 // Invoked when received SCSI_CMD_READ_CAPACITY_10 and SCSI_CMD_READ_FORMAT_CAPACITY to determine the disk size
 // Application update block count and block size
-void tud_msc_capacity_cb(uint8_t lun, uint32_t* block_count, uint16_t* block_size)
-{
+void tud_msc_capacity_cb(uint8_t lun, uint32_t *block_count, uint16_t *block_size) {
   (void) lun;
 
   *block_count = DISK_BLOCK_NUM;
-  *block_size  = DISK_BLOCK_SIZE;
+  *block_size = DISK_BLOCK_SIZE;
 }
 
 // Invoked when received Start Stop Unit command
 // - Start = 0 : stopped power mode, if load_eject = 1 : unload disk storage
 // - Start = 1 : active mode, if load_eject = 1 : load disk storage
-bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject)
-{
+bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, bool load_eject) {
   (void) lun;
   (void) power_condition;
 
-  if ( load_eject )
-  {
-    if (start)
-    {
+  if (load_eject) {
+    if (start) {
       // load disk storage
-    }else
-    {
+    } else {
       // unload disk storage
       ejected = true;
     }
@@ -185,59 +175,51 @@ bool tud_msc_start_stop_cb(uint8_t lun, uint8_t power_condition, bool start, boo
 
 // Callback invoked when received READ10 command.
 // Copy disk's data to buffer (up to bufsize) and return number of copied bytes.
-int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_read10_cb(uint8_t lun, uint32_t lba, uint32_t offset, void *buffer, uint32_t bufsize) {
   (void) lun;
 
   // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) {
+  if (lba >= DISK_BLOCK_NUM) {
     return -1;
   }
 
   // Check for overflow of offset + bufsize
-  if ( lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE ) {
+  if (lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE) {
     return -1;
   }
 
-  uint8_t const* addr = msc_disk[lba] + offset;
+  uint8_t const *addr = msc_disk[lba] + offset;
   memcpy(buffer, addr, bufsize);
 
   return (int32_t) bufsize;
 }
 
-bool tud_msc_is_writable_cb (uint8_t lun)
-{
+bool tud_msc_is_writable_cb(uint8_t lun) {
   (void) lun;
 
-#ifdef CFG_EXAMPLE_MSC_READONLY
+  #ifdef CFG_EXAMPLE_MSC_READONLY
   return false;
-#else
+  #else
   return true;
-#endif
+  #endif
 }
 
 // Callback invoked when received WRITE10 command.
 // Process data in buffer to disk's storage and return number of written bytes
-int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize)
-{
+int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t *buffer, uint32_t bufsize) {
   (void) lun;
 
   // out of ramdisk
-  if ( lba >= DISK_BLOCK_NUM ) {
-    return -1;
-  }
-
-  // Check for overflow of offset + bufsize
-  if ( lba * DISK_BLOCK_SIZE + offset + bufsize > DISK_BLOCK_NUM * DISK_BLOCK_SIZE ) {
-    return -1;
-  }
+  if (lba >= DISK_BLOCK_NUM) return -1;
 
-#ifndef CFG_EXAMPLE_MSC_READONLY
-  uint8_t* addr = msc_disk[lba] + offset;
+  #ifndef CFG_EXAMPLE_MSC_READONLY
+  uint8_t *addr = msc_disk[lba] + offset;
   memcpy(addr, buffer, bufsize);
-#else
-  (void) lba; (void) offset; (void) buffer;
-#endif
+  #else
+  (void) lba;
+  (void) offset;
+  (void) buffer;
+  #endif
 
   return (int32_t) bufsize;
 }
@@ -245,42 +227,18 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
 // Callback invoked when received an SCSI command not in built-in list below
 // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
 // - READ10 and WRITE10 has their own callbacks
-int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize)
-{
-  // read10 & write10 has their own callback and MUST not be handled here
+int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void *buffer, uint16_t bufsize) {
+  (void) buffer;
+  (void) bufsize;
 
-  void const* response = NULL;
-  int32_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
-
-  switch (scsi_cmd[0])
-  {
+  switch (scsi_cmd[0]) {
     default:
       // Set Sense = Invalid Command Operation
       tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00);
 
       // negative means error -> tinyusb could stall and/or response with failed status
-      resplen = -1;
-    break;
+      return -1;
   }
-
-  // return resplen must not larger than bufsize
-  if ( resplen > bufsize ) resplen = bufsize;
-
-  if ( response && (resplen > 0) )
-  {
-    if(in_xfer)
-    {
-      memcpy(buffer, response, (size_t) resplen);
-    }else
-    {
-      // SCSI output
-    }
-  }
-
-  return (int32_t) resplen;
 }
 
 #endif
diff --git a/examples/device/msc_dual_lun/src/msc_disk_dual.c b/examples/device/msc_dual_lun/src/msc_disk_dual.c
index b44b77c6c..1f7fb98c7 100644
--- a/examples/device/msc_dual_lun/src/msc_disk_dual.c
+++ b/examples/device/msc_dual_lun/src/msc_disk_dual.c
@@ -55,8 +55,7 @@ If you find any bugs or get any questions, feel free to file an\r\n\
 issue at github.com/hathach/tinyusb"
 
 
-MSC_CONST uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] =
-{
+MSC_CONST uint8_t msc_disk0[DISK_BLOCK_NUM][DISK_BLOCK_SIZE] = {
   //------------- Block0: Boot Sector -------------//
   // byte_per_sector    = DISK_BLOCK_SIZE; fat12_sector_num_16  = DISK_BLOCK_NUM;
   // sector_per_cluster = 1; reserved_sectors = 1;
@@ -283,9 +282,11 @@ bool tud_msc_is_writable_cb(uint8_t lun) {
 // Process data in buffer to disk's storage and return number of written bytes
 int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize) {
   // out of ramdisk
-  if (lba >= DISK_BLOCK_NUM) return -1;
+  if (lba >= DISK_BLOCK_NUM) {
+    return -1;
+  }
 
-#if defined(CFG_EXAMPLE_MSC_READONLY) || defined(CFG_EXAMPLE_MSC_DUAL_READONLY)
+  #if defined(CFG_EXAMPLE_MSC_READONLY) || defined(CFG_EXAMPLE_MSC_DUAL_READONLY)
   (void) lun;
   (void) lba;
   (void) offset;
@@ -302,11 +303,8 @@ int32_t tud_msc_write10_cb(uint8_t lun, uint32_t lba, uint32_t offset, uint8_t*
 // - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE
 // - READ10 and WRITE10 has their own callbacks (MUST not be handled here)
 int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) {
-  void const* response = NULL;
-  int32_t resplen = 0;
-
-  // most scsi handled is input
-  bool in_xfer = true;
+  (void) buffer;
+  (void) bufsize;
 
   switch (scsi_cmd[0]) {
     default:
@@ -316,19 +314,6 @@ int32_t tud_msc_scsi_cb(uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, u
       // negative means error -> tinyusb could stall and/or response with failed status
       return -1;
   }
-
-  // return resplen must not larger than bufsize
-  if (resplen > bufsize) resplen = bufsize;
-
-  if (response && (resplen > 0)) {
-    if (in_xfer) {
-      memcpy(buffer, response, (size_t) resplen);
-    } else {
-      // SCSI output
-    }
-  }
-
-  return resplen;
 }
 
 #endif
diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt
index 5ebe71612..20a264387 100644
--- a/examples/device/net_lwip_webserver/skip.txt
+++ b/examples/device/net_lwip_webserver/skip.txt
@@ -10,6 +10,8 @@ mcu:SAMD11
 mcu:STM32L0
 mcu:STM32F0
 mcu:KINETIS_KL
+mcu:STM32H7RS
+mcu:STM32N6
 family:broadcom_64bit
 family:broadcom_32bit
 family:espressif
diff --git a/examples/device/net_lwip_webserver/src/lwipopts.h b/examples/device/net_lwip_webserver/src/lwipopts.h
index 41e8f0d67..04949cef9 100644
--- a/examples/device/net_lwip_webserver/src/lwipopts.h
+++ b/examples/device/net_lwip_webserver/src/lwipopts.h
@@ -58,6 +58,7 @@
 #define LWIP_HTTPD_SSI_INCLUDE_TAG      0
 
 #define LWIP_SINGLE_NETIF               1
+#define LWIP_NETIF_LINK_CALLBACK        1
 
 #define PBUF_POOL_SIZE                  4
 
diff --git a/examples/device/net_lwip_webserver/src/main.c b/examples/device/net_lwip_webserver/src/main.c
index 36f402332..4bdddf6c5 100644
--- a/examples/device/net_lwip_webserver/src/main.c
+++ b/examples/device/net_lwip_webserver/src/main.c
@@ -31,6 +31,12 @@ this appears as either a RNDIS or CDC-ECM USB virtual network adapter; the OS pi
 RNDIS should be valid on Linux and Windows hosts, and CDC-ECM should be valid on Linux and macOS hosts
 
 The MCU appears to the host as IP address 192.168.7.1, and provides a DHCP server, DNS server, and web server.
+
+Link State Control:
+- Press the user button to toggle the network link state (UP/DOWN)
+- This simulates "ethernet cable unplugged/plugged" events
+- The host OS will see the network interface as disconnected/connected accordingly
+- Use this to test network error handling and recovery in host applications
 */
 /*
 Some smartphones *may* work with this implementation as well, but likely have limited (broken) drivers,
@@ -63,9 +69,6 @@ try changing the first byte of tud_network_mac_address[] below from 0x02 to 0x00
 /* lwip context */
 static struct netif netif_data;
 
-/* shared between tud_network_recv_cb() and service_traffic() */
-static struct pbuf *received_frame;
-
 /* this is used by this code, ./class/net/net_driver.c, and usb_descriptors.c */
 /* ideally speaking, this should be generated from the hardware's unique ID (if available) */
 /* it is suggested that the first byte is 0x02 to indicate a link-local address */
@@ -137,6 +140,12 @@ static err_t netif_init_cb(struct netif *netif) {
   return ERR_OK;
 }
 
+/* notifies the USB host about the link state change. */
+static void usbnet_netif_link_callback(struct netif *netif) {
+    bool link_up = netif_is_link_up(netif);
+    tud_network_link_state(BOARD_TUD_RHPORT, link_up);
+}
+
 static void init_lwip(void) {
   struct netif *netif = &netif_data;
 
@@ -147,11 +156,19 @@ static void init_lwip(void) {
   memcpy(netif->hwaddr, tud_network_mac_address, sizeof(tud_network_mac_address));
   netif->hwaddr[5] ^= 0x01;
 
-  netif = netif_add(netif, &ipaddr, &netmask, &gateway, NULL, netif_init_cb, ip_input);
+  netif = netif_add(netif, &ipaddr, &netmask, &gateway, NULL, netif_init_cb, ethernet_input);
 #if LWIP_IPV6
   netif_create_ip6_linklocal_address(netif, 1);
 #endif
   netif_set_default(netif);
+
+#if LWIP_NETIF_LINK_CALLBACK
+  // Set the link callback to notify USB host about link state changes
+  netif_set_link_callback(netif, usbnet_netif_link_callback);
+  netif_set_link_up(netif);
+#else
+  tud_network_link_state(BOARD_TUD_RHPORT, true);
+#endif
 }
 
 /* handle any DNS requests from dns-server */
@@ -164,20 +181,29 @@ bool dns_query_proc(const char *name, ip4_addr_t *addr) {
 }
 
 bool tud_network_recv_cb(const uint8_t *src, uint16_t size) {
-  /* this shouldn't happen, but if we get another packet before
-  parsing the previous, we must signal our inability to accept it */
-  if (received_frame) return false;
+  struct netif *netif = &netif_data;
 
   if (size) {
     struct pbuf *p = pbuf_alloc(PBUF_RAW, size, PBUF_POOL);
 
-    if (p) {
-      /* pbuf_alloc() has already initialized struct; all we need to do is copy the data */
-      memcpy(p->payload, src, size);
+    if (p == NULL) {
+      printf("ERROR: Failed to allocate pbuf of size %d\n", size);
+      return false;
+    }
+
+    /* Copy buf to pbuf */
+    pbuf_take(p, src, size);
 
-      /* store away the pointer for service_traffic() to later handle */
-      received_frame = p;
+    // Surrender ownership of our pbuf unless there was an error
+    // Only call pbuf_free if not Ok else it will panic with "pbuf_free: p->ref > 0"
+    // or steal it from whatever took ownership of it with undefined consequences.
+    // See: https://savannah.nongnu.org/patch/index.php?10121
+    if (netif->input(p, netif) != ERR_OK) {
+      printf("ERROR: netif input failed\n");
+      pbuf_free(p);
     }
+    // Signal tinyusb that the current frame has been processed.
+    tud_network_recv_renew();
   }
 
   return true;
@@ -191,29 +217,26 @@ uint16_t tud_network_xmit_cb(uint8_t *dst, void *ref, uint16_t arg) {
   return pbuf_copy_partial(p, dst, p->tot_len, 0);
 }
 
-static void service_traffic(void) {
-  /* handle any packet received by tud_network_recv_cb() */
-  if (received_frame) {
-    // Surrender ownership of our pbuf unless there was an error
-    // Only call pbuf_free if not Ok else it will panic with "pbuf_free: p->ref > 0"
-    // or steal it from whatever took ownership of it with undefined consequences.
-    // See: https://savannah.nongnu.org/patch/index.php?10121
-    if (ethernet_input(received_frame, &netif_data)!=ERR_OK) {
-        pbuf_free(received_frame);
+static void handle_link_state_switch(void) {
+  /* Check for button press to toggle link state */
+  static bool last_link_state = true;
+  static bool last_button_state = false;
+  bool current_button_state = board_button_read();
+
+  if (current_button_state && !last_button_state) {
+    /* Button pressed - toggle link state */
+    last_link_state = !last_link_state;
+    if (last_link_state) {
+      printf("Link state: UP\n");
+      netif_set_link_up(&netif_data);
+    } else {
+      printf("Link state: DOWN\n");
+      netif_set_link_down(&netif_data);
     }
-    received_frame = NULL;
-    tud_network_recv_renew();
+    /* LWIP callback will notify USB host about the change */
   }
+  last_button_state = current_button_state;
 
-  sys_check_timeouts();
-}
-
-void tud_network_init_cb(void) {
-  /* if the network is re-initializing and we have a leftover packet, we must do a cleanup */
-  if (received_frame) {
-    pbuf_free(received_frame);
-    received_frame = NULL;
-  }
 }
 
 int main(void) {
@@ -243,15 +266,23 @@ int main(void) {
   lwiperf_start_tcp_server_default(NULL, NULL);
 #endif
 
+#if CFG_TUD_NCM
+  printf("USB NCM network interface initialized\n");
+#elif CFG_TUD_ECM_RNDIS
+  printf("USB RNDIS/ECM network interface initialized\n");
+#endif
+
   while (1) {
     tud_task();
-    service_traffic();
+    sys_check_timeouts(); // service lwip
+    handle_link_state_switch();
   }
 
   return 0;
 }
 
 /* lwip has provision for using a mutex, when applicable */
+/* This implementation is for single-threaded use only */
 sys_prot_t sys_arch_protect(void) {
   return 0;
 }
diff --git a/examples/device/net_lwip_webserver/src/tusb_config.h b/examples/device/net_lwip_webserver/src/tusb_config.h
index 22082fc81..c774f59ff 100644
--- a/examples/device/net_lwip_webserver/src/tusb_config.h
+++ b/examples/device/net_lwip_webserver/src/tusb_config.h
@@ -85,6 +85,7 @@ extern "C" {
 #endif
 
 // Use different configurations to test all net devices (also due to resource limitations)
+#ifndef USE_ECM
 #if TU_CHECK_MCU(OPT_MCU_LPC15XX, OPT_MCU_LPC40XX, OPT_MCU_LPC51UXX, OPT_MCU_LPC54)
   #define USE_ECM 1
 #elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAML21, OPT_MCU_SAML22)
@@ -97,6 +98,7 @@ extern "C" {
   #define USE_ECM 0
   #define INCLUDE_IPERF
 #endif
+#endif
 
 //--------------------------------------------------------------------
 // NCM CLASS CONFIGURATION, SEE "ncm.h" FOR PERFORMANCE TUNING