update all host examples

2 files changed, 40 insertions, 52 deletions

diff --git a/examples/dual/host_hid_to_device_cdc/src/main.c b/examples/dual/host_hid_to_device_cdc/src/main.c
index 62ecb2c3f..6a25a28da 100644
--- a/examples/dual/host_hid_to_device_cdc/src/main.c
+++ b/examples/dual/host_hid_to_device_cdc/src/main.c
@@ -79,7 +79,9 @@ int main(void)
 
   printf("TinyUSB Host HID <-> Device CDC Example\r\n");
 
-  tusb_init();
+  // init device and host stack on configured roothub port
+  tud_init(BOARD_TUD_RHPORT);
+  tuh_init(BOARD_TUH_RHPORT);
 
   while (1)
   {
diff --git a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h
index 9a8f31da0..f749bd712 100644
--- a/examples/dual/host_hid_to_device_cdc/src/tusb_config.h
+++ b/examples/dual/host_hid_to_device_cdc/src/tusb_config.h
@@ -30,75 +30,61 @@
  extern "C" {
 #endif
 
-//--------------------------------------------------------------------
-// COMMON CONFIGURATION
-//--------------------------------------------------------------------
-
-// defined by board.mk
-#ifndef CFG_TUSB_MCU
-  #error CFG_TUSB_MCU must be defined
-#endif
+//--------------------------------------------------------------------+
+// Board Specific Configuration
+//--------------------------------------------------------------------+
 
 // RHPort number used for device can be defined by board.mk, default to port 0
 #ifndef BOARD_TUD_RHPORT
-  #define BOARD_TUD_RHPORT     0
+#define BOARD_TUD_RHPORT      0
 #endif
 
-// RHPort number used for device can be defined by board.mk, default to port 1
-#ifndef BOARD_TUH_RHPORT
-  #define BOARD_TUH_RHPORT     1
-#endif
-
-// Use raspberry pio-usb for host
-#define CFG_TUH_RPI_PIO_USB            1
-
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
 #ifndef BOARD_TUD_MAX_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_TUD_MAX_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_TUD_MAX_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+#define BOARD_TUD_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
+#endif
+
+// RHPort number used for host can be defined by board.mk, default to port 1
+#ifndef BOARD_TUH_RHPORT
+#define BOARD_TUH_RHPORT      1
 #endif
 
 // RHPort max operational speed can defined by board.mk
-// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
 #ifndef BOARD_TUH_MAX_SPEED
-  #if TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX, OPT_MCU_MIMXRT10XX, OPT_MCU_NUC505) ||\
-      TU_CHECK_MCU(OPT_MCU_CXD56, OPT_MCU_SAMX7X, OPT_MCU_BCM2711) ||\
-      TU_CHECK_MCU(OPT_MCU_FT90X, OPT_MCU_FT93X)
-    #define BOARD_TUH_MAX_SPEED   OPT_MODE_HIGH_SPEED
-  #else
-    #define BOARD_TUH_MAX_SPEED   OPT_MODE_FULL_SPEED
-  #endif
+#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
 #endif
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_TUD_RHPORT == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
-#elif BOARD_TUD_RHPORT == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_TUD_MAX_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
-#endif
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
 
-// Device mode with rhport and speed defined by board.mk
-#if   BOARD_TUH_RHPORT == 0
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_HOST | BOARD_TUH_MAX_SPEED)
-#elif BOARD_TUH_RHPORT == 1
-  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_HOST | BOARD_TUH_MAX_SPEED)
-#else
-  #error "Incorrect RHPort configuration"
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+#error CFG_TUSB_MCU must be defined
 #endif
 
-// This example doesn't use an RTOS
 #ifndef CFG_TUSB_OS
-#define CFG_TUSB_OS               OPT_OS_NONE
+#define CFG_TUSB_OS           OPT_OS_NONE
+#endif
+
+#ifndef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG        0
+#endif
+
+// Enable Device stack, Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUD_ENABLED       1
+#define CFG_TUD_MAX_SPEED     BOARD_TUD_MAX_SPEED
+
+// Enable Host stack, Default is max speed that hardware controller could support with on-chip PHY
+#define CFG_TUH_ENABLED       1
+#define CFG_TUH_MAX_SPEED     BOARD_TUH_MAX_SPEED
+
+#if CFG_TUSB_MCU == OPT_MCU_RP2040
+// Use pico-pio-usb as host controller for raspberry rp2040
+#define CFG_TUH_RPI_PIO_USB   1
 #endif
 
+
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0
 
@@ -114,7 +100,7 @@
 #endif
 
 #ifndef CFG_TUSB_MEM_ALIGN
-#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#define CFG_TUSB_MEM_ALIGN        __attribute__ ((aligned(4)))
 #endif
 
 //--------------------------------------------------------------------