Merge remote-tracking branch 'upstream/master' into pr/1702

122 files changed, 25456 insertions, 296 deletions

diff --git a/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..7152fda01
--- /dev/null
+++ b/hw/bsp/imxrt/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,149 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "fsl_device_registers.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*8*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       4
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif /* __FREERTOS_CONFIG__H */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.cmake b/hw/bsp/imxrt/boards/metro_m7_1011/board.cmake
new file mode 100644
index 000000000..99681ab12
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.cmake
@@ -0,0 +1,15 @@
+set(MCU_VARIANT MIMXRT1011)
+
+set(JLINK_DEVICE MIMXRT1011xxx5A)
+set(PYOCD_TARGET mimxrt1010)
+set(NXPLINK_DEVICE MIMXRT1011xxxxx:EVK-MIMXRT1010)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1010_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1011DAE5A
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h
new file mode 100644
index 000000000..24141f5f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h
@@ -0,0 +1,47 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_M7_1011_H_
+#define BOARD_M7_1011_H_
+
+// required since iMXRT MCUX-SDK include this file for board size
+#define BOARD_FLASH_SIZE     (8*1024*1024)
+
+// LED: IOMUXC_GPIO_03_GPIOMUX_IO03
+#define LED_PORT            BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN             BOARD_INITPINS_USER_LED_CHANNEL
+#define LED_STATE_ON        1
+
+// D8 as button: GPIO8
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
+#define BUTTON_STATE_ACTIVE   0
+
+// UART: IOMUXC_GPIO_09_LPUART1_RXD, IOMUXC_GPIO_10_LPUART1_TXD
+#define UART_PORT             LPUART1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
+
+#endif
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.mk b/hw/bsp/imxrt/boards/metro_m7_1011/board.mk
new file mode 100644
index 000000000..b845194c2
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.mk
@@ -0,0 +1,17 @@
+CFLAGS += -DCPU_MIMXRT1011DAE5A -DCFG_EXAMPLE_VIDEO_READONLY
+MCU_VARIANT = MIMXRT1011
+
+# LD file with uf2
+LD_FILE = $(BOARD_PATH)/$(BOARD).ld
+
+# For flash-jlink target
+JLINK_DEVICE = MIMXRT1011xxx5A
+
+# For flash-pyocd target
+PYOCD_TARGET = mimxrt1010
+
+# flash using pyocd
+flash: flash-uf2
+flash-uf2: $(BUILD)/$(PROJECT).uf2
+	@echo copying $<
+	@$(CP) $< /media/$(USER)/METROM7BOOT
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c
new file mode 100644
index 000000000..d5c93222c
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c
@@ -0,0 +1,340 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v12.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 14.0.0
+board: MIMXRT1010-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: ADC_ALT_CLK.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true}
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5'}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK}
+- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL2.denom, value: '1'}
+- {id: CCM_ANALOG.PLL2.num, value: '0'}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
+    CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0);
+#endif
+    /* Disable ADC_ACLK_EN clock gate. */
+    CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK;
+    /* Set ADC_ACLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_AdcDiv, 11);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */
+    /* Set Pll3 SW clock source to use the USB1 PLL output. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Set safe value of the AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 1);
+    /* Set periph clock2 clock source to use the PLL3_SW_CLK. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h
new file mode 100644
index 000000000..cc627cf6a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h
@@ -0,0 +1,97 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK                40000000UL     /* Clock consumers of ADC_ALT_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL        /* Clock consumers of CKIL_SYNC_CLK_ROOT output : CSU, EWM, GPT1, GPT2, KPP, PIT, RTWDOG, SNVS, SPDIF, TEMPMON, USB, WDOG1, WDOG2 */
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL            /* Clock consumers of CLKO1_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL            /* Clock consumers of CLKO2_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL      /* Clock consumers of CLK_1M output : EWM, RTWDOG */
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL     /* Clock consumers of CLK_24M output : GPT1, GPT2 */
+#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT              500000000UL    /* Clock consumers of CORE_CLK_ROOT output : ARM, FLEXSPI */
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL    /* Clock consumers of ENET_500M_REF_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL     /* Clock consumers of FLEXIO1_CLK_ROOT output : FLEXIO1 */
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL    /* Clock consumers of FLEXSPI_CLK_ROOT output : FLEXSPI */
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL     /* Clock consumers of GPT1_ipg_clk_highfreq output : GPT1 */
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL     /* Clock consumers of GPT2_ipg_clk_highfreq output : GPT2 */
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL    /* Clock consumers of IPG_CLK_ROOT output : ADC1, ADC_ETC, AIPSTZ1, AIPSTZ2, AOI, ARM, CCM, CSU, DCDC, DCP, DMA0, DMAMUX, EWM, FLEXIO1, FLEXRAM, FLEXSPI, GPC, GPIO1, GPIO2, GPIO5, IOMUXC, KPP, LPI2C1, LPI2C2, LPSPI1, LPSPI2, LPUART1, LPUART2, LPUART3, LPUART4, OCOTP, PWM1, RTWDOG, SAI1, SAI3, SNVS, SPDIF, SRC, TEMPMON, TRNG, USB, WDOG1, WDOG2, XBARA */
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL     /* Clock consumers of LPI2C_CLK_ROOT output : LPI2C1, LPI2C2 */
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL    /* Clock consumers of LPSPI_CLK_ROOT output : LPSPI1, LPSPI2 */
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL     /* Clock consumers of MQS_MCLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL     /* Clock consumers of PERCLK_CLK_ROOT output : GPT1, GPT2, PIT */
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL     /* Clock consumers of SAI1_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL     /* Clock consumers of SAI1_MCLK1 output : SAI1 */
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL     /* Clock consumers of SAI1_MCLK2 output : SAI1 */
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL     /* Clock consumers of SAI1_MCLK3 output : SAI1 */
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL     /* Clock consumers of SAI3_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL     /* Clock consumers of SAI3_MCLK1 output : SAI3 */
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL            /* Clock consumers of SAI3_MCLK2 output : SAI3 */
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL     /* Clock consumers of SAI3_MCLK3 output : SAI3 */
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL     /* Clock consumers of SPDIF0_CLK_ROOT output : SPDIF */
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL            /* Clock consumers of SPDIF0_EXTCLK_OUT output : SPDIF */
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL    /* Clock consumers of TRACE_CLK_ROOT output : ARM */
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL     /* Clock consumers of UART_CLK_ROOT output : LPUART1, LPUART2, LPUART3, LPUART4 */
+#define BOARD_BOOTCLOCKRUN_USBPHY_CLK                 480000000UL    /* Clock consumers of USBPHY_CLK output : TEMPMON, USB */
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c
new file mode 100644
index 000000000..2d869b56e
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.c
@@ -0,0 +1,91 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v14.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 14.0.0
+board: MIMXRT1010-EVK
+external_user_signals: {}
+pin_labels:
+- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: GPIO_11}
+- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED;USER_LED}
+- {pin_num: '4', pin_signal: GPIO_08, label: 'SAI1_MCLK/U10[11]', identifier: USER_BUTTON}
+power_domains: {NVCC_GPIO: '3.3'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09}
+  - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10}
+  - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, identifier: USER_LED, direction: OUTPUT}
+  - {pin_num: '4', peripheral: GPIO1, signal: 'gpiomux_io, 08', pin_signal: GPIO_08, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  /* GPIO configuration of USER_LED on GPIO_03 (pin 10) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_03 (pin 10) */
+  GPIO_PinInit(GPIO1, 3U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on GPIO_08 (pin 4) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_08 (pin 4) */
+  GPIO_PinInit(GPIO1, 8U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_03_GPIOMUX_IO03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_08_GPIOMUX_IO08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_08_GPIOMUX_IO08, 0xB0A0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h
new file mode 100644
index 000000000..5a6603cbe
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/pin_mux.h
@@ -0,0 +1,81 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x08U /*!< Select GPIO1 or GPIO2: affected bits mask */
+
+/* GPIO_09 (number 3), LPUART1_RXD/J56[2] */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_RXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_RXD_SIGNAL                                      RXD   /*!< Signal name */
+
+/* GPIO_10 (number 2), LPUART1_TXD/J56[4] */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_TXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_TXD_SIGNAL                                      TXD   /*!< Signal name */
+
+/* GPIO_03 (number 10), SAI1_RXD0/U10[16] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                gpiomux_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       3U   /*!< Signal channel */
+
+/* GPIO_08 (number 4), SAI1_MCLK/U10[11] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                             gpiomux_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    8U   /*!< Signal channel */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/evkmimxrt1010_flexspi_nor_config.c b/hw/bsp/imxrt/boards/metro_m7_1011/evkmimxrt1010_flexspi_nor_config.c
new file mode 100644
index 000000000..752a65629
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/evkmimxrt1010_flexspi_nor_config.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "evkmimxrt1010_flexspi_nor_config.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.xip_board"
+#endif
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".boot_hdr.conf")))
+#elif defined(__ICCARM__)
+#pragma location = ".boot_hdr.conf"
+#endif
+
+const flexspi_nor_config_t qspiflash_config = {
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+            .sflashPadType    = kSerialFlash_4Pads,
+            .serialClkFreq    = kFlexSpiSerialClk_100MHz,
+            .sflashA1Size     = 16u * 1024u * 1024u,
+            .lookupTable =
+                {
+                    // Read LUTs
+                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 24),
+                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
+                },
+        },
+    .pageSize           = 256u,
+    .sectorSize         = 4u * 1024u,
+    .blockSize          = 64u * 1024u,
+    .isUniformBlockSize = false,
+};
+#endif /* XIP_BOOT_HEADER_ENABLE */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/evkmimxrt1010_flexspi_nor_config.h b/hw/bsp/imxrt/boards/metro_m7_1011/evkmimxrt1010_flexspi_nor_config.h
new file mode 100644
index 000000000..bb5a64448
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/evkmimxrt1010_flexspi_nor_config.h
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
+#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_common.h"
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief XIP_BOARD driver version 2.0.0. */
+#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
+/*@}*/
+
+/* FLEXSPI memory config block related definitions */
+#define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
+#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
+#define FLEXSPI_CFG_BLK_SIZE (512)
+
+/* FLEXSPI Feature related definitions */
+#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
+
+/* Lookup table related definitions */
+#define CMD_INDEX_READ 0
+#define CMD_INDEX_READSTATUS 1
+#define CMD_INDEX_WRITEENABLE 2
+#define CMD_INDEX_WRITE 4
+
+#define CMD_LUT_SEQ_IDX_READ 0
+#define CMD_LUT_SEQ_IDX_READSTATUS 1
+#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
+#define CMD_LUT_SEQ_IDX_WRITE 9
+
+#define CMD_SDR 0x01
+#define CMD_DDR 0x21
+#define RADDR_SDR 0x02
+#define RADDR_DDR 0x22
+#define CADDR_SDR 0x03
+#define CADDR_DDR 0x23
+#define MODE1_SDR 0x04
+#define MODE1_DDR 0x24
+#define MODE2_SDR 0x05
+#define MODE2_DDR 0x25
+#define MODE4_SDR 0x06
+#define MODE4_DDR 0x26
+#define MODE8_SDR 0x07
+#define MODE8_DDR 0x27
+#define WRITE_SDR 0x08
+#define WRITE_DDR 0x28
+#define READ_SDR 0x09
+#define READ_DDR 0x29
+#define LEARN_SDR 0x0A
+#define LEARN_DDR 0x2A
+#define DATSZ_SDR 0x0B
+#define DATSZ_DDR 0x2B
+#define DUMMY_SDR 0x0C
+#define DUMMY_DDR 0x2C
+#define DUMMY_RWDS_SDR 0x0D
+#define DUMMY_RWDS_DDR 0x2D
+#define JMP_ON_CS 0x1F
+#define STOP 0
+
+#define FLEXSPI_1PAD 0
+#define FLEXSPI_2PAD 1
+#define FLEXSPI_4PAD 2
+#define FLEXSPI_8PAD 3
+
+#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)                                                              \
+    (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
+     FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
+
+//!@brief Definitions for FlexSPI Serial Clock Frequency
+typedef enum _FlexSpiSerialClockFreq
+{
+    kFlexSpiSerialClk_30MHz  = 1,
+    kFlexSpiSerialClk_50MHz  = 2,
+    kFlexSpiSerialClk_60MHz  = 3,
+    kFlexSpiSerialClk_75MHz  = 4,
+    kFlexSpiSerialClk_80MHz  = 5,
+    kFlexSpiSerialClk_100MHz = 6,
+    kFlexSpiSerialClk_120MHz = 7,
+    kFlexSpiSerialClk_133MHz = 8,
+} flexspi_serial_clk_freq_t;
+
+//!@brief FlexSPI clock configuration type
+enum
+{
+    kFlexSpiClk_SDR, //!< Clock configure for SDR mode
+    kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
+};
+
+//!@brief FlexSPI Read Sample Clock Source definition
+typedef enum _FlashReadSampleClkSource
+{
+    kFlexSPIReadSampleClk_LoopbackInternally      = 0,
+    kFlexSPIReadSampleClk_LoopbackFromDqsPad      = 1,
+    kFlexSPIReadSampleClk_LoopbackFromSckPad      = 2,
+    kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
+} flexspi_read_sample_clk_t;
+
+//!@brief Misc feature bit definitions
+enum
+{
+    kFlexSpiMiscOffset_DiffClkEnable            = 0, //!< Bit for Differential clock enable
+    kFlexSpiMiscOffset_Ck2Enable                = 1, //!< Bit for CK2 enable
+    kFlexSpiMiscOffset_ParallelEnable           = 2, //!< Bit for Parallel mode enable
+    kFlexSpiMiscOffset_WordAddressableEnable    = 3, //!< Bit for Word Addressable enable
+    kFlexSpiMiscOffset_SafeConfigFreqEnable     = 4, //!< Bit for Safe Configuration Frequency enable
+    kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
+    kFlexSpiMiscOffset_DdrModeEnable            = 6, //!< Bit for DDR clock confiuration indication.
+};
+
+//!@brief Flash Type Definition
+enum
+{
+    kFlexSpiDeviceType_SerialNOR    = 1,    //!< Flash devices are Serial NOR
+    kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
+    kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
+    kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+};
+
+//!@brief Flash Pad Definitions
+enum
+{
+    kSerialFlash_1Pad  = 1,
+    kSerialFlash_2Pads = 2,
+    kSerialFlash_4Pads = 4,
+    kSerialFlash_8Pads = 8,
+};
+
+//!@brief FlexSPI LUT Sequence structure
+typedef struct _lut_sequence
+{
+    uint8_t seqNum; //!< Sequence Number, valid number: 1-16
+    uint8_t seqId;  //!< Sequence Index, valid number: 0-15
+    uint16_t reserved;
+} flexspi_lut_seq_t;
+
+//!@brief Flash Configuration Command Type
+enum
+{
+    kDeviceConfigCmdType_Generic,    //!< Generic command, for example: configure dummy cycles, drive strength, etc
+    kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
+    kDeviceConfigCmdType_Spi2Xpi,    //!< Switch from SPI to DPI/QPI/OPI mode
+    kDeviceConfigCmdType_Xpi2Spi,    //!< Switch from DPI/QPI/OPI to SPI mode
+    kDeviceConfigCmdType_Spi2NoCmd,  //!< Switch to 0-4-4/0-8-8 mode
+    kDeviceConfigCmdType_Reset,      //!< Reset device command
+};
+
+//!@brief FlexSPI Memory Configuration Block
+typedef struct _FlexSPIConfig
+{
+    uint32_t tag;               //!< [0x000-0x003] Tag, fixed value 0x42464346UL
+    uint32_t version;           //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
+    uint32_t reserved0;         //!< [0x008-0x00b] Reserved for future use
+    uint8_t readSampleClkSrc;   //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
+    uint8_t csHoldTime;         //!< [0x00d-0x00d] CS hold time, default value: 3
+    uint8_t csSetupTime;        //!< [0x00e-0x00e] CS setup time, default value: 3
+    uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
+    //! Serial NAND, need to refer to datasheet
+    uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
+    uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
+    //! Generic configuration, etc.
+    uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
+    //! DPI/QPI/OPI switch or reset command
+    flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
+    //! sequence number, [31:16] Reserved
+    uint32_t deviceModeArg;    //!< [0x018-0x01b] Argument/Parameter for device configuration
+    uint8_t configCmdEnable;   //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
+    uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
+    flexspi_lut_seq_t
+        configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
+    uint32_t reserved1;   //!< [0x02c-0x02f] Reserved for future use
+    uint32_t configCmdArgs[3];     //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
+    uint32_t reserved2;            //!< [0x03c-0x03f] Reserved for future use
+    uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
+    //! details
+    uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
+    uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
+    //! Chapter for more details
+    uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
+    //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
+    uint32_t reserved3[2];           //!< [0x048-0x04f] Reserved for future use
+    uint32_t sflashA1Size;           //!< [0x050-0x053] Size of Flash connected to A1
+    uint32_t sflashA2Size;           //!< [0x054-0x057] Size of Flash connected to A2
+    uint32_t sflashB1Size;           //!< [0x058-0x05b] Size of Flash connected to B1
+    uint32_t sflashB2Size;           //!< [0x05c-0x05f] Size of Flash connected to B2
+    uint32_t csPadSettingOverride;   //!< [0x060-0x063] CS pad setting override value
+    uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
+    uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
+    uint32_t dqsPadSettingOverride;  //!< [0x06c-0x06f] DQS pad setting override value
+    uint32_t timeoutInMs;            //!< [0x070-0x073] Timeout threshold for read status command
+    uint32_t commandInterval;        //!< [0x074-0x077] CS deselect interval between two commands
+    uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
+    uint16_t busyOffset;       //!< [0x07c-0x07d] Busy offset, valid value: 0-31
+    uint16_t busyBitPolarity;  //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
+    //! busy flag is 0 when flash device is busy
+    uint32_t lookupTable[64];           //!< [0x080-0x17f] Lookup table holds Flash command sequences
+    flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
+    uint32_t reserved4[4];              //!< [0x1b0-0x1bf] Reserved for future use
+} flexspi_mem_config_t;
+
+/*  */
+#define NOR_CMD_INDEX_READ CMD_INDEX_READ               //!< 0
+#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS   //!< 1
+#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
+#define NOR_CMD_INDEX_ERASESECTOR 3                     //!< 3
+#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE       //!< 4
+#define NOR_CMD_INDEX_CHIPERASE 5                       //!< 5
+#define NOR_CMD_INDEX_DUMMY 6                           //!< 6
+#define NOR_CMD_INDEX_ERASEBLOCK 7                      //!< 7
+
+#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0  READ LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
+    CMD_LUT_SEQ_IDX_READSTATUS //!< 1  Read Status LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
+    2 //!< 2  Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
+    CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3  Write Enable sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
+    4 //!< 4  Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5  Erase Sector sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8  //!< 8 Erase Block sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
+    CMD_LUT_SEQ_IDX_WRITE                //!< 9  Program sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
+    14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
+    15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
+
+/*
+ *  Serial NOR configuration block
+ */
+typedef struct _flexspi_nor_config
+{
+    flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
+    uint32_t pageSize;              //!< Page size of Serial NOR
+    uint32_t sectorSize;            //!< Sector size of Serial NOR
+    uint8_t ipcmdSerialClkFreq;     //!< Clock frequency for IP command
+    uint8_t isUniformBlockSize;     //!< Sector/Block size is the same
+    uint8_t reserved0[2];           //!< Reserved for future use
+    uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
+    uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
+    uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
+    uint32_t blockSize;             //!< Block size
+    uint32_t reserve2[11];          //!< Reserved for future use
+} flexspi_nor_config_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld
new file mode 100644
index 000000000..960fc6891
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld
@@ -0,0 +1,270 @@
+/*
+** ###################################################################
+**     Processors:          MIMXRT1011CAE4A
+**                          MIMXRT1011DAE5A
+**
+**     Compiler:            GNU C Compiler
+**     Reference manual:    IMXRT1010RM Rev.0, 09/2019
+**     Version:             rev. 1.0, 2019-08-01
+**     Build:               b210709
+**
+**     Abstract:
+**         Linker file for the GNU C Compiler
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2021 NXP
+**     All rights reserved.
+**
+**     SPDX-License-Identifier: BSD-3-Clause
+**
+**     http:                 www.nxp.com
+**     mail:                 [email protected]
+**
+** ###################################################################
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+HEAP_SIZE  = DEFINED(__heap_size__)  ? __heap_size__  : 0x0400;
+STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400;
+VECTOR_RAM_SIZE = DEFINED(__ram_vector_table__) ? 0x00000400 : 0;
+
+/* Specify the memory areas */
+MEMORY
+{
+  m_flash_config        (RX)  : ORIGIN = 0x60000400, LENGTH = 0x00000C00
+  m_ivt                 (RX)  : ORIGIN = 0x60001000, LENGTH = 0x00001000
+
+  m_interrupts          (RX)  : ORIGIN = 0x6000C000, LENGTH = 0x00000400
+  m_text                (RX)  : ORIGIN = 0x6000C400, LENGTH = (8*1024*1024 - 0xC400)
+  m_qacode              (RX)  : ORIGIN = 0x00000000, LENGTH = 0x00008000
+  m_data                (RW)  : ORIGIN = 0x20000000, LENGTH = 0x00008000
+  m_data2               (RW)  : ORIGIN = 0x20200000, LENGTH = 0x00010000
+}
+
+/* Define output sections */
+SECTIONS
+{
+  __NCACHE_REGION_START = ORIGIN(m_data2);
+  __NCACHE_REGION_SIZE  = 0;
+
+  .flash_config :
+  {
+    . = ALIGN(4);
+    __FLASH_BASE = .;
+    KEEP(* (.boot_hdr.conf))     /* flash config section */
+    . = ALIGN(4);
+  } > m_flash_config
+
+  ivt_begin = ORIGIN(m_flash_config) + LENGTH(m_flash_config);
+
+  .ivt : AT(ivt_begin)
+  {
+    . = ALIGN(4);
+    KEEP(* (.boot_hdr.ivt))           /* ivt section */
+    KEEP(* (.boot_hdr.boot_data))     /* boot section */
+    KEEP(* (.boot_hdr.dcd_data))      /* dcd section */
+    . = ALIGN(4);
+  } > m_ivt
+
+  /* The startup code goes first into internal RAM */
+  .interrupts :
+  {
+    __VECTOR_TABLE = .;
+    __Vectors = .;
+    . = ALIGN(4);
+    KEEP(*(.isr_vector))     /* Startup code */
+    . = ALIGN(4);
+  } > m_interrupts
+
+  /* The program code and other data goes into internal RAM */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)                 /* .text sections (code) */
+    *(.text*)                /* .text* sections (code) */
+    *(.rodata)               /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)              /* .rodata* sections (constants, strings, etc.) */
+    *(.glue_7)               /* glue arm to thumb code */
+    *(.glue_7t)              /* glue thumb to arm code */
+    *(.eh_frame)
+    KEEP (*(.init))
+    KEEP (*(.fini))
+    . = ALIGN(4);
+  } > m_text
+
+  .ARM.extab :
+  {
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+  } > m_text
+
+  .ARM :
+  {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } > m_text
+
+ .ctors :
+  {
+    __CTOR_LIST__ = .;
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       from the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __CTOR_END__ = .;
+  } > m_text
+
+  .dtors :
+  {
+    __DTOR_LIST__ = .;
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    __DTOR_END__ = .;
+  } > m_text
+
+  .preinit_array :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } > m_text
+
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } > m_text
+
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } > m_text
+
+  __etext = .;    /* define a global symbol at end of code */
+  __DATA_ROM = .; /* Symbol is used by startup for data initialization */
+
+  .interrupts_ram :
+  {
+    . = ALIGN(4);
+    __VECTOR_RAM__ = .;
+    __interrupts_ram_start__ = .; /* Create a global symbol at data start */
+    *(.m_interrupts_ram)     /* This is a user defined section */
+    . += VECTOR_RAM_SIZE;
+    . = ALIGN(4);
+    __interrupts_ram_end__ = .; /* Define a global symbol at data end */
+  } > m_data
+
+  __VECTOR_RAM = DEFINED(__ram_vector_table__) ? __VECTOR_RAM__ : ORIGIN(m_interrupts);
+  __RAM_VECTOR_TABLE_SIZE_BYTES = DEFINED(__ram_vector_table__) ? (__interrupts_ram_end__ - __interrupts_ram_start__) : 0x0;
+
+  .data : AT(__DATA_ROM)
+  {
+    . = ALIGN(4);
+    __DATA_RAM = .;
+    __data_start__ = .;      /* create a global symbol at data start */
+    *(m_usb_dma_init_data)
+    *(.data)                 /* .data sections */
+    *(.data*)                /* .data* sections */
+    *(DataQuickAccess)       /* quick access data section */
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+    __data_end__ = .;        /* define a global symbol at data end */
+  } > m_data
+
+  __ram_function_flash_start = __DATA_ROM + (__data_end__ - __data_start__); /* Symbol is used by startup for TCM data initialization */
+
+  .ram_function : AT(__ram_function_flash_start)
+  {
+    . = ALIGN(32);
+    __ram_function_start__ = .;
+    *(CodeQuickAccess)
+    . = ALIGN(128);
+    __ram_function_end__ = .;
+  } > m_qacode
+
+  __NDATA_ROM = __ram_function_flash_start + (__ram_function_end__ - __ram_function_start__);
+  .ncache.init : AT(__NDATA_ROM)
+  {
+    __noncachedata_start__ = .;   /* create a global symbol at ncache data start */
+    *(NonCacheable.init)
+    . = ALIGN(4);
+    __noncachedata_init_end__ = .;   /* create a global symbol at initialized ncache data end */
+  } > m_data
+  . = __noncachedata_init_end__;
+  .ncache :
+  {
+    *(NonCacheable)
+    . = ALIGN(4);
+    __noncachedata_end__ = .;     /* define a global symbol at ncache data end */
+  } > m_data
+
+  __DATA_END = __NDATA_ROM + (__noncachedata_init_end__ - __noncachedata_start__);
+  text_end = ORIGIN(m_text) + LENGTH(m_text);
+  ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data")
+
+  /* Uninitialized data section */
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    . = ALIGN(4);
+    __START_BSS = .;
+    __bss_start__ = .;
+    *(m_usb_dma_noninit_data)
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+    __END_BSS = .;
+  } > m_data
+
+  .heap :
+  {
+    . = ALIGN(8);
+    __end__ = .;
+    PROVIDE(end = .);
+    __HeapBase = .;
+    . += HEAP_SIZE;
+    __HeapLimit = .;
+    __heap_limit = .; /* Add for _sbrk */
+  } > m_data
+
+  .stack :
+  {
+    . = ALIGN(8);
+    . += STACK_SIZE;
+  } > m_data
+
+  /* Initializes stack on the end of block */
+  __StackTop   = ORIGIN(m_data) + LENGTH(m_data);
+  __StackLimit = __StackTop - STACK_SIZE;
+  PROVIDE(__stack = __StackTop);
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+
+  ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap")
+}
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex
new file mode 100644
index 000000000..ef551731a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex
@@ -0,0 +1,400 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1010-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_14 http://mcuxpresso.nxp.com/XSD/mex_configuration_14.xsd" uuid="f341eb24-9521-4127-8932-81692aeb76df" version="14" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_14" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1011xxxxx</processor>
+      <package>MIMXRT1011DAE5A</package>
+      <board>MIMXRT1010-EVK</board>
+      <board_revision>A</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="14.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>14.0.0</processor_version>
+            <pin_labels>
+               <pin_label pin_num="1" pin_signal="GPIO_11" label="GPIO_11" identifier="GPIO_11"/>
+               <pin_label pin_num="10" pin_signal="GPIO_03" label="SAI1_RXD0/U10[16]" identifier="LED;USER_LED"/>
+               <pin_label pin_num="4" pin_signal="GPIO_08" label="SAI1_MCLK/U10[11]" identifier="USER_BUTTON"/>
+            </pin_labels>
+            <external_user_signals>
+               <routingDetailsColumns/>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="GPIO1" description="Peripheral GPIO1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RXD" pin_num="3" pin_signal="GPIO_09"/>
+                  <pin peripheral="LPUART1" signal="TXD" pin_num="2" pin_signal="GPIO_10"/>
+                  <pin peripheral="GPIO1" signal="gpiomux_io, 03" pin_num="10" pin_signal="GPIO_03">
+                     <pin_features>
+                        <pin_feature name="identifier" value="USER_LED"/>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpiomux_io, 08" pin_num="4" pin_signal="GPIO_08">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>14.0.0</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="ADC_ALT_CLK.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CORE_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.ADC_ACLK_PODF.scale" value="12" locked="true"/>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="false"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM_ANALOG.ENET_500M_REF_CLK" locked="false"/>
+                  <setting id="CCM.SAI1_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.SAI3_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="5e519eed-bd94-4950-84de-0f29de85bcea" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="COMBO_SENSOR" uuid="2342e373-ea2e-4bed-8aa4-bd33509155f6" type="lpi2c" type_id="lpi2c_6b71962515c3208facfccd030afebc98" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="BOARD_BootClockRUN"/>
+                     </config_set>
+                     <config_set name="interrupt_vector"/>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="0d9274fe-8f49-48a8-8e6a-8c3ac009384d" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_BUTTON" uuid="6c9e57cc-d98c-4f6d-bf94-3920a8fd474e" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO2_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_LED" uuid="0f7a142d-ad6c-4e47-a2a3-015e90afa37b" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO1_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO1_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="2a54e709-5718-4b89-8b7b-71cefb418658" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="991327ca-3ad0-49d1-aff3-37b7734338db" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="3e46e698-099c-4180-92f5-2af1abbb93a5" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="27e43a4b-bddb-4db2-8f6b-3f6a73008a27" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="c946fe99-5d76-4cca-8be0-dea3c7861b68" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c18a4299-93be-44e8-b563-3985b3e264c5" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="6149366a-a07f-40a7-8909-00ba459085a7" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="15cc4d18-2002-44a4-b7e7-f681a046f26c" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.cmake b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.cmake
new file mode 100644
index 000000000..99681ab12
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.cmake
@@ -0,0 +1,15 @@
+set(MCU_VARIANT MIMXRT1011)
+
+set(JLINK_DEVICE MIMXRT1011xxx5A)
+set(PYOCD_TARGET mimxrt1010)
+set(NXPLINK_DEVICE MIMXRT1011xxxxx:EVK-MIMXRT1010)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1010_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1011DAE5A
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h
new file mode 100644
index 000000000..343e17f81
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.h
@@ -0,0 +1,47 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_METRO_M7_1011_SD_H_
+#define BOARD_METRO_M7_1011_SD_H_
+
+// required since iMXRT MCUX-SDK include this file for board size
+#define BOARD_FLASH_SIZE     (8*1024*1024)
+
+// LED: IOMUXC_GPIO_03_GPIOMUX_IO03
+#define LED_PORT            BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN             BOARD_INITPINS_USER_LED_CHANNEL
+#define LED_STATE_ON        1
+
+// D8 as button: GPIO8
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
+#define BUTTON_STATE_ACTIVE   0
+
+// UART: IOMUXC_GPIO_09_LPUART1_RXD, IOMUXC_GPIO_10_LPUART1_TXD
+#define UART_PORT             LPUART1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
+
+#endif
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk
new file mode 100644
index 000000000..b845194c2
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board.mk
@@ -0,0 +1,17 @@
+CFLAGS += -DCPU_MIMXRT1011DAE5A -DCFG_EXAMPLE_VIDEO_READONLY
+MCU_VARIANT = MIMXRT1011
+
+# LD file with uf2
+LD_FILE = $(BOARD_PATH)/$(BOARD).ld
+
+# For flash-jlink target
+JLINK_DEVICE = MIMXRT1011xxx5A
+
+# For flash-pyocd target
+PYOCD_TARGET = mimxrt1010
+
+# flash using pyocd
+flash: flash-uf2
+flash-uf2: $(BUILD)/$(PROJECT).uf2
+	@echo copying $<
+	@$(CP) $< /media/$(USER)/METROM7BOOT
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.c b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.c
new file mode 100644
index 000000000..1b28b668a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.c
@@ -0,0 +1,340 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1010-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: ADC_ALT_CLK.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true}
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5'}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK}
+- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL2.denom, value: '1'}
+- {id: CCM_ANALOG.PLL2.num, value: '0'}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
+    CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0);
+#endif
+    /* Disable ADC_ACLK_EN clock gate. */
+    CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK;
+    /* Set ADC_ACLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_AdcDiv, 11);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */
+    /* Set Pll3 SW clock source to use the USB1 PLL output. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Set safe value of the AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 1);
+    /* Set periph clock2 clock source to use the PLL3_SW_CLK. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.h
new file mode 100644
index 000000000..119fd94bd
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/clock_config.h
@@ -0,0 +1,97 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK                40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT              500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY_CLK                 480000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c
new file mode 100644
index 000000000..aa38e02dc
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.c
@@ -0,0 +1,108 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1010-EVK
+external_user_signals: {}
+pin_labels:
+- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: GPIO_11}
+- {pin_num: '70', pin_signal: GPIO_SD_05}
+- {pin_num: '10', pin_signal: GPIO_03, label: 'SAI1_RXD0/U10[16]', identifier: LED;USER_LED}
+- {pin_num: '4', pin_signal: GPIO_08, label: 'SAI1_MCLK/U10[11]', identifier: USER_BUTTON}
+- {pin_num: '79', pin_signal: GPIO_13, label: 'USB_OTG1_ID/J9[4]/Q9[2]', identifier: TRACE1}
+power_domains: {NVCC_GPIO: '3.3'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09}
+  - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10}
+  - {pin_num: '10', peripheral: GPIO1, signal: 'gpiomux_io, 03', pin_signal: GPIO_03, identifier: USER_LED, direction: OUTPUT}
+  - {pin_num: '79', peripheral: ARM, signal: 'TRACE, 1', pin_signal: GPIO_13, speed: MHZ_200}
+  - {pin_num: '80', peripheral: ARM, signal: 'TRACE, 2', pin_signal: GPIO_12, speed: MHZ_200}
+  - {pin_num: '58', peripheral: ARM, signal: arm_trace_clk, pin_signal: GPIO_AD_02, speed: MHZ_200}
+  - {pin_num: '1', peripheral: ARM, signal: 'TRACE, 3', pin_signal: GPIO_11, speed: MHZ_200}
+  - {pin_num: '60', peripheral: ARM, signal: 'TRACE, 0', pin_signal: GPIO_AD_00, speed: MHZ_200}
+  - {pin_num: '4', peripheral: GPIO1, signal: 'gpiomux_io, 08', pin_signal: GPIO_08, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_100K_Ohm}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  /* GPIO configuration of USER_LED on GPIO_03 (pin 10) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_03 (pin 10) */
+  GPIO_PinInit(GPIO1, 3U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on GPIO_08 (pin 4) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_08 (pin 4) */
+  GPIO_PinInit(GPIO1, 8U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_03_GPIOMUX_IO03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_08_GPIOMUX_IO08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_08_GPIOMUX_IO08, 0xB0A0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_11_ARM_TRACE3, 0x10E0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_12_ARM_TRACE2, 0x10E0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_13_ARM_TRACE1, 0x10E0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0x10E0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0x10E0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h
new file mode 100644
index 000000000..42c256745
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/board/pin_mux.h
@@ -0,0 +1,110 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x08U /*!< Select GPIO1 or GPIO2: affected bits mask */
+
+/* GPIO_09 (number 3), LPUART1_RXD/J56[2] */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_RXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_RXD_SIGNAL                                      RXD   /*!< Signal name */
+
+/* GPIO_10 (number 2), LPUART1_TXD/J56[4] */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_TXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_TXD_SIGNAL                                      TXD   /*!< Signal name */
+
+/* GPIO_03 (number 10), SAI1_RXD0/U10[16] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                gpiomux_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       3U   /*!< Signal channel */
+
+/* GPIO_13 (number 79), USB_OTG1_ID/J9[4]/Q9[2] */
+/* Routed pin properties */
+#define BOARD_INITPINS_TRACE1_PERIPHERAL                                     ARM   /*!< Peripheral name */
+#define BOARD_INITPINS_TRACE1_SIGNAL                                       TRACE   /*!< Signal name */
+#define BOARD_INITPINS_TRACE1_CHANNEL                                         1U   /*!< Signal channel */
+
+/* GPIO_12 (number 80), USB_OTG1_OC/U7[A2] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USB_OTG1_OC_PERIPHERAL                                ARM   /*!< Peripheral name */
+#define BOARD_INITPINS_USB_OTG1_OC_SIGNAL                                  TRACE   /*!< Signal name */
+#define BOARD_INITPINS_USB_OTG1_OC_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_AD_02 (number 58), ADC12_2/J26[12]/J56[16] */
+/* Routed pin properties */
+#define BOARD_INITPINS_ADC12_2_PERIPHERAL                                    ARM   /*!< Peripheral name */
+#define BOARD_INITPINS_ADC12_2_SIGNAL                              arm_trace_clk   /*!< Signal name */
+
+/* GPIO_11 (number 1), GPIO_11 */
+/* Routed pin properties */
+#define BOARD_INITPINS_GPIO_11_PERIPHERAL                                    ARM   /*!< Peripheral name */
+#define BOARD_INITPINS_GPIO_11_SIGNAL                                      TRACE   /*!< Signal name */
+#define BOARD_INITPINS_GPIO_11_CHANNEL                                        3U   /*!< Signal channel */
+
+/* GPIO_AD_00 (number 60), USB_OTG1_PWR */
+/* Routed pin properties */
+#define BOARD_INITPINS_USB_OTG1_PWR_PERIPHERAL                               ARM   /*!< Peripheral name */
+#define BOARD_INITPINS_USB_OTG1_PWR_SIGNAL                                 TRACE   /*!< Signal name */
+#define BOARD_INITPINS_USB_OTG1_PWR_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_08 (number 4), SAI1_MCLK/U10[11] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                             gpiomux_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    8U   /*!< Signal channel */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.c b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.c
new file mode 100644
index 000000000..752a65629
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "evkmimxrt1010_flexspi_nor_config.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.xip_board"
+#endif
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".boot_hdr.conf")))
+#elif defined(__ICCARM__)
+#pragma location = ".boot_hdr.conf"
+#endif
+
+const flexspi_nor_config_t qspiflash_config = {
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+            .sflashPadType    = kSerialFlash_4Pads,
+            .serialClkFreq    = kFlexSpiSerialClk_100MHz,
+            .sflashA1Size     = 16u * 1024u * 1024u,
+            .lookupTable =
+                {
+                    // Read LUTs
+                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 24),
+                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
+                },
+        },
+    .pageSize           = 256u,
+    .sectorSize         = 4u * 1024u,
+    .blockSize          = 64u * 1024u,
+    .isUniformBlockSize = false,
+};
+#endif /* XIP_BOOT_HEADER_ENABLE */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.h b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.h
new file mode 100644
index 000000000..bb5a64448
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/evkmimxrt1010_flexspi_nor_config.h
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2019 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
+#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_common.h"
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief XIP_BOARD driver version 2.0.0. */
+#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
+/*@}*/
+
+/* FLEXSPI memory config block related definitions */
+#define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
+#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
+#define FLEXSPI_CFG_BLK_SIZE (512)
+
+/* FLEXSPI Feature related definitions */
+#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
+
+/* Lookup table related definitions */
+#define CMD_INDEX_READ 0
+#define CMD_INDEX_READSTATUS 1
+#define CMD_INDEX_WRITEENABLE 2
+#define CMD_INDEX_WRITE 4
+
+#define CMD_LUT_SEQ_IDX_READ 0
+#define CMD_LUT_SEQ_IDX_READSTATUS 1
+#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
+#define CMD_LUT_SEQ_IDX_WRITE 9
+
+#define CMD_SDR 0x01
+#define CMD_DDR 0x21
+#define RADDR_SDR 0x02
+#define RADDR_DDR 0x22
+#define CADDR_SDR 0x03
+#define CADDR_DDR 0x23
+#define MODE1_SDR 0x04
+#define MODE1_DDR 0x24
+#define MODE2_SDR 0x05
+#define MODE2_DDR 0x25
+#define MODE4_SDR 0x06
+#define MODE4_DDR 0x26
+#define MODE8_SDR 0x07
+#define MODE8_DDR 0x27
+#define WRITE_SDR 0x08
+#define WRITE_DDR 0x28
+#define READ_SDR 0x09
+#define READ_DDR 0x29
+#define LEARN_SDR 0x0A
+#define LEARN_DDR 0x2A
+#define DATSZ_SDR 0x0B
+#define DATSZ_DDR 0x2B
+#define DUMMY_SDR 0x0C
+#define DUMMY_DDR 0x2C
+#define DUMMY_RWDS_SDR 0x0D
+#define DUMMY_RWDS_DDR 0x2D
+#define JMP_ON_CS 0x1F
+#define STOP 0
+
+#define FLEXSPI_1PAD 0
+#define FLEXSPI_2PAD 1
+#define FLEXSPI_4PAD 2
+#define FLEXSPI_8PAD 3
+
+#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)                                                              \
+    (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
+     FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
+
+//!@brief Definitions for FlexSPI Serial Clock Frequency
+typedef enum _FlexSpiSerialClockFreq
+{
+    kFlexSpiSerialClk_30MHz  = 1,
+    kFlexSpiSerialClk_50MHz  = 2,
+    kFlexSpiSerialClk_60MHz  = 3,
+    kFlexSpiSerialClk_75MHz  = 4,
+    kFlexSpiSerialClk_80MHz  = 5,
+    kFlexSpiSerialClk_100MHz = 6,
+    kFlexSpiSerialClk_120MHz = 7,
+    kFlexSpiSerialClk_133MHz = 8,
+} flexspi_serial_clk_freq_t;
+
+//!@brief FlexSPI clock configuration type
+enum
+{
+    kFlexSpiClk_SDR, //!< Clock configure for SDR mode
+    kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
+};
+
+//!@brief FlexSPI Read Sample Clock Source definition
+typedef enum _FlashReadSampleClkSource
+{
+    kFlexSPIReadSampleClk_LoopbackInternally      = 0,
+    kFlexSPIReadSampleClk_LoopbackFromDqsPad      = 1,
+    kFlexSPIReadSampleClk_LoopbackFromSckPad      = 2,
+    kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
+} flexspi_read_sample_clk_t;
+
+//!@brief Misc feature bit definitions
+enum
+{
+    kFlexSpiMiscOffset_DiffClkEnable            = 0, //!< Bit for Differential clock enable
+    kFlexSpiMiscOffset_Ck2Enable                = 1, //!< Bit for CK2 enable
+    kFlexSpiMiscOffset_ParallelEnable           = 2, //!< Bit for Parallel mode enable
+    kFlexSpiMiscOffset_WordAddressableEnable    = 3, //!< Bit for Word Addressable enable
+    kFlexSpiMiscOffset_SafeConfigFreqEnable     = 4, //!< Bit for Safe Configuration Frequency enable
+    kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
+    kFlexSpiMiscOffset_DdrModeEnable            = 6, //!< Bit for DDR clock confiuration indication.
+};
+
+//!@brief Flash Type Definition
+enum
+{
+    kFlexSpiDeviceType_SerialNOR    = 1,    //!< Flash devices are Serial NOR
+    kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
+    kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
+    kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+};
+
+//!@brief Flash Pad Definitions
+enum
+{
+    kSerialFlash_1Pad  = 1,
+    kSerialFlash_2Pads = 2,
+    kSerialFlash_4Pads = 4,
+    kSerialFlash_8Pads = 8,
+};
+
+//!@brief FlexSPI LUT Sequence structure
+typedef struct _lut_sequence
+{
+    uint8_t seqNum; //!< Sequence Number, valid number: 1-16
+    uint8_t seqId;  //!< Sequence Index, valid number: 0-15
+    uint16_t reserved;
+} flexspi_lut_seq_t;
+
+//!@brief Flash Configuration Command Type
+enum
+{
+    kDeviceConfigCmdType_Generic,    //!< Generic command, for example: configure dummy cycles, drive strength, etc
+    kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
+    kDeviceConfigCmdType_Spi2Xpi,    //!< Switch from SPI to DPI/QPI/OPI mode
+    kDeviceConfigCmdType_Xpi2Spi,    //!< Switch from DPI/QPI/OPI to SPI mode
+    kDeviceConfigCmdType_Spi2NoCmd,  //!< Switch to 0-4-4/0-8-8 mode
+    kDeviceConfigCmdType_Reset,      //!< Reset device command
+};
+
+//!@brief FlexSPI Memory Configuration Block
+typedef struct _FlexSPIConfig
+{
+    uint32_t tag;               //!< [0x000-0x003] Tag, fixed value 0x42464346UL
+    uint32_t version;           //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
+    uint32_t reserved0;         //!< [0x008-0x00b] Reserved for future use
+    uint8_t readSampleClkSrc;   //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
+    uint8_t csHoldTime;         //!< [0x00d-0x00d] CS hold time, default value: 3
+    uint8_t csSetupTime;        //!< [0x00e-0x00e] CS setup time, default value: 3
+    uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
+    //! Serial NAND, need to refer to datasheet
+    uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
+    uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
+    //! Generic configuration, etc.
+    uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
+    //! DPI/QPI/OPI switch or reset command
+    flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
+    //! sequence number, [31:16] Reserved
+    uint32_t deviceModeArg;    //!< [0x018-0x01b] Argument/Parameter for device configuration
+    uint8_t configCmdEnable;   //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
+    uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
+    flexspi_lut_seq_t
+        configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
+    uint32_t reserved1;   //!< [0x02c-0x02f] Reserved for future use
+    uint32_t configCmdArgs[3];     //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
+    uint32_t reserved2;            //!< [0x03c-0x03f] Reserved for future use
+    uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
+    //! details
+    uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
+    uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
+    //! Chapter for more details
+    uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
+    //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
+    uint32_t reserved3[2];           //!< [0x048-0x04f] Reserved for future use
+    uint32_t sflashA1Size;           //!< [0x050-0x053] Size of Flash connected to A1
+    uint32_t sflashA2Size;           //!< [0x054-0x057] Size of Flash connected to A2
+    uint32_t sflashB1Size;           //!< [0x058-0x05b] Size of Flash connected to B1
+    uint32_t sflashB2Size;           //!< [0x05c-0x05f] Size of Flash connected to B2
+    uint32_t csPadSettingOverride;   //!< [0x060-0x063] CS pad setting override value
+    uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
+    uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
+    uint32_t dqsPadSettingOverride;  //!< [0x06c-0x06f] DQS pad setting override value
+    uint32_t timeoutInMs;            //!< [0x070-0x073] Timeout threshold for read status command
+    uint32_t commandInterval;        //!< [0x074-0x077] CS deselect interval between two commands
+    uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
+    uint16_t busyOffset;       //!< [0x07c-0x07d] Busy offset, valid value: 0-31
+    uint16_t busyBitPolarity;  //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
+    //! busy flag is 0 when flash device is busy
+    uint32_t lookupTable[64];           //!< [0x080-0x17f] Lookup table holds Flash command sequences
+    flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
+    uint32_t reserved4[4];              //!< [0x1b0-0x1bf] Reserved for future use
+} flexspi_mem_config_t;
+
+/*  */
+#define NOR_CMD_INDEX_READ CMD_INDEX_READ               //!< 0
+#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS   //!< 1
+#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
+#define NOR_CMD_INDEX_ERASESECTOR 3                     //!< 3
+#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE       //!< 4
+#define NOR_CMD_INDEX_CHIPERASE 5                       //!< 5
+#define NOR_CMD_INDEX_DUMMY 6                           //!< 6
+#define NOR_CMD_INDEX_ERASEBLOCK 7                      //!< 7
+
+#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0  READ LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
+    CMD_LUT_SEQ_IDX_READSTATUS //!< 1  Read Status LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
+    2 //!< 2  Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
+    CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3  Write Enable sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
+    4 //!< 4  Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5  Erase Sector sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8  //!< 8 Erase Block sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
+    CMD_LUT_SEQ_IDX_WRITE                //!< 9  Program sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
+    14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
+    15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
+
+/*
+ *  Serial NOR configuration block
+ */
+typedef struct _flexspi_nor_config
+{
+    flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
+    uint32_t pageSize;              //!< Page size of Serial NOR
+    uint32_t sectorSize;            //!< Sector size of Serial NOR
+    uint8_t ipcmdSerialClkFreq;     //!< Clock frequency for IP command
+    uint8_t isUniformBlockSize;     //!< Sector/Block size is the same
+    uint8_t reserved0[2];           //!< Reserved for future use
+    uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
+    uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
+    uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
+    uint32_t blockSize;             //!< Block size
+    uint32_t reserve2[11];          //!< Reserved for future use
+} flexspi_nor_config_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.ld b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.ld
new file mode 100644
index 000000000..960fc6891
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.ld
@@ -0,0 +1,270 @@
+/*
+** ###################################################################
+**     Processors:          MIMXRT1011CAE4A
+**                          MIMXRT1011DAE5A
+**
+**     Compiler:            GNU C Compiler
+**     Reference manual:    IMXRT1010RM Rev.0, 09/2019
+**     Version:             rev. 1.0, 2019-08-01
+**     Build:               b210709
+**
+**     Abstract:
+**         Linker file for the GNU C Compiler
+**
+**     Copyright 2016 Freescale Semiconductor, Inc.
+**     Copyright 2016-2021 NXP
+**     All rights reserved.
+**
+**     SPDX-License-Identifier: BSD-3-Clause
+**
+**     http:                 www.nxp.com
+**     mail:                 [email protected]
+**
+** ###################################################################
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+HEAP_SIZE  = DEFINED(__heap_size__)  ? __heap_size__  : 0x0400;
+STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400;
+VECTOR_RAM_SIZE = DEFINED(__ram_vector_table__) ? 0x00000400 : 0;
+
+/* Specify the memory areas */
+MEMORY
+{
+  m_flash_config        (RX)  : ORIGIN = 0x60000400, LENGTH = 0x00000C00
+  m_ivt                 (RX)  : ORIGIN = 0x60001000, LENGTH = 0x00001000
+
+  m_interrupts          (RX)  : ORIGIN = 0x6000C000, LENGTH = 0x00000400
+  m_text                (RX)  : ORIGIN = 0x6000C400, LENGTH = (8*1024*1024 - 0xC400)
+  m_qacode              (RX)  : ORIGIN = 0x00000000, LENGTH = 0x00008000
+  m_data                (RW)  : ORIGIN = 0x20000000, LENGTH = 0x00008000
+  m_data2               (RW)  : ORIGIN = 0x20200000, LENGTH = 0x00010000
+}
+
+/* Define output sections */
+SECTIONS
+{
+  __NCACHE_REGION_START = ORIGIN(m_data2);
+  __NCACHE_REGION_SIZE  = 0;
+
+  .flash_config :
+  {
+    . = ALIGN(4);
+    __FLASH_BASE = .;
+    KEEP(* (.boot_hdr.conf))     /* flash config section */
+    . = ALIGN(4);
+  } > m_flash_config
+
+  ivt_begin = ORIGIN(m_flash_config) + LENGTH(m_flash_config);
+
+  .ivt : AT(ivt_begin)
+  {
+    . = ALIGN(4);
+    KEEP(* (.boot_hdr.ivt))           /* ivt section */
+    KEEP(* (.boot_hdr.boot_data))     /* boot section */
+    KEEP(* (.boot_hdr.dcd_data))      /* dcd section */
+    . = ALIGN(4);
+  } > m_ivt
+
+  /* The startup code goes first into internal RAM */
+  .interrupts :
+  {
+    __VECTOR_TABLE = .;
+    __Vectors = .;
+    . = ALIGN(4);
+    KEEP(*(.isr_vector))     /* Startup code */
+    . = ALIGN(4);
+  } > m_interrupts
+
+  /* The program code and other data goes into internal RAM */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)                 /* .text sections (code) */
+    *(.text*)                /* .text* sections (code) */
+    *(.rodata)               /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)              /* .rodata* sections (constants, strings, etc.) */
+    *(.glue_7)               /* glue arm to thumb code */
+    *(.glue_7t)              /* glue thumb to arm code */
+    *(.eh_frame)
+    KEEP (*(.init))
+    KEEP (*(.fini))
+    . = ALIGN(4);
+  } > m_text
+
+  .ARM.extab :
+  {
+    *(.ARM.extab* .gnu.linkonce.armextab.*)
+  } > m_text
+
+  .ARM :
+  {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } > m_text
+
+ .ctors :
+  {
+    __CTOR_LIST__ = .;
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       from the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    __CTOR_END__ = .;
+  } > m_text
+
+  .dtors :
+  {
+    __DTOR_LIST__ = .;
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    __DTOR_END__ = .;
+  } > m_text
+
+  .preinit_array :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } > m_text
+
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } > m_text
+
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } > m_text
+
+  __etext = .;    /* define a global symbol at end of code */
+  __DATA_ROM = .; /* Symbol is used by startup for data initialization */
+
+  .interrupts_ram :
+  {
+    . = ALIGN(4);
+    __VECTOR_RAM__ = .;
+    __interrupts_ram_start__ = .; /* Create a global symbol at data start */
+    *(.m_interrupts_ram)     /* This is a user defined section */
+    . += VECTOR_RAM_SIZE;
+    . = ALIGN(4);
+    __interrupts_ram_end__ = .; /* Define a global symbol at data end */
+  } > m_data
+
+  __VECTOR_RAM = DEFINED(__ram_vector_table__) ? __VECTOR_RAM__ : ORIGIN(m_interrupts);
+  __RAM_VECTOR_TABLE_SIZE_BYTES = DEFINED(__ram_vector_table__) ? (__interrupts_ram_end__ - __interrupts_ram_start__) : 0x0;
+
+  .data : AT(__DATA_ROM)
+  {
+    . = ALIGN(4);
+    __DATA_RAM = .;
+    __data_start__ = .;      /* create a global symbol at data start */
+    *(m_usb_dma_init_data)
+    *(.data)                 /* .data sections */
+    *(.data*)                /* .data* sections */
+    *(DataQuickAccess)       /* quick access data section */
+    KEEP(*(.jcr*))
+    . = ALIGN(4);
+    __data_end__ = .;        /* define a global symbol at data end */
+  } > m_data
+
+  __ram_function_flash_start = __DATA_ROM + (__data_end__ - __data_start__); /* Symbol is used by startup for TCM data initialization */
+
+  .ram_function : AT(__ram_function_flash_start)
+  {
+    . = ALIGN(32);
+    __ram_function_start__ = .;
+    *(CodeQuickAccess)
+    . = ALIGN(128);
+    __ram_function_end__ = .;
+  } > m_qacode
+
+  __NDATA_ROM = __ram_function_flash_start + (__ram_function_end__ - __ram_function_start__);
+  .ncache.init : AT(__NDATA_ROM)
+  {
+    __noncachedata_start__ = .;   /* create a global symbol at ncache data start */
+    *(NonCacheable.init)
+    . = ALIGN(4);
+    __noncachedata_init_end__ = .;   /* create a global symbol at initialized ncache data end */
+  } > m_data
+  . = __noncachedata_init_end__;
+  .ncache :
+  {
+    *(NonCacheable)
+    . = ALIGN(4);
+    __noncachedata_end__ = .;     /* define a global symbol at ncache data end */
+  } > m_data
+
+  __DATA_END = __NDATA_ROM + (__noncachedata_init_end__ - __noncachedata_start__);
+  text_end = ORIGIN(m_text) + LENGTH(m_text);
+  ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data")
+
+  /* Uninitialized data section */
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    . = ALIGN(4);
+    __START_BSS = .;
+    __bss_start__ = .;
+    *(m_usb_dma_noninit_data)
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+    . = ALIGN(4);
+    __bss_end__ = .;
+    __END_BSS = .;
+  } > m_data
+
+  .heap :
+  {
+    . = ALIGN(8);
+    __end__ = .;
+    PROVIDE(end = .);
+    __HeapBase = .;
+    . += HEAP_SIZE;
+    __HeapLimit = .;
+    __heap_limit = .; /* Add for _sbrk */
+  } > m_data
+
+  .stack :
+  {
+    . = ALIGN(8);
+    . += STACK_SIZE;
+  } > m_data
+
+  /* Initializes stack on the end of block */
+  __StackTop   = ORIGIN(m_data) + LENGTH(m_data);
+  __StackLimit = __StackTop - STACK_SIZE;
+  PROVIDE(__stack = __StackTop);
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+
+  ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap")
+}
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex
new file mode 100644
index 000000000..7aab59a68
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/metro_m7_1011_sd.mex
@@ -0,0 +1,431 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1010-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="f341eb24-9521-4127-8932-81692aeb76df" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1011xxxxx</processor>
+      <package>MIMXRT1011DAE5A</package>
+      <board>MIMXRT1010-EVK</board>
+      <board_revision>A</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="1" pin_signal="GPIO_11" label="GPIO_11" identifier="GPIO_11"/>
+               <pin_label pin_num="70" pin_signal="GPIO_SD_05" label=""/>
+               <pin_label pin_num="10" pin_signal="GPIO_03" label="SAI1_RXD0/U10[16]" identifier="LED;USER_LED"/>
+               <pin_label pin_num="4" pin_signal="GPIO_08" label="SAI1_MCLK/U10[11]" identifier="USER_BUTTON"/>
+               <pin_label pin_num="79" pin_signal="GPIO_13" label="USB_OTG1_ID/J9[4]/Q9[2]" identifier="TRACE1"/>
+            </pin_labels>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="ARM" description="Peripheral ARM is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="GPIO1" description="Peripheral GPIO1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RXD" pin_num="3" pin_signal="GPIO_09"/>
+                  <pin peripheral="LPUART1" signal="TXD" pin_num="2" pin_signal="GPIO_10"/>
+                  <pin peripheral="GPIO1" signal="gpiomux_io, 03" pin_num="10" pin_signal="GPIO_03">
+                     <pin_features>
+                        <pin_feature name="identifier" value="USER_LED"/>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="ARM" signal="TRACE, 1" pin_num="79" pin_signal="GPIO_13">
+                     <pin_features>
+                        <pin_feature name="speed" value="MHZ_200"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="ARM" signal="TRACE, 2" pin_num="80" pin_signal="GPIO_12">
+                     <pin_features>
+                        <pin_feature name="speed" value="MHZ_200"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="ARM" signal="arm_trace_clk" pin_num="58" pin_signal="GPIO_AD_02">
+                     <pin_features>
+                        <pin_feature name="speed" value="MHZ_200"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="ARM" signal="TRACE, 3" pin_num="1" pin_signal="GPIO_11">
+                     <pin_features>
+                        <pin_feature name="speed" value="MHZ_200"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="ARM" signal="TRACE, 0" pin_num="60" pin_signal="GPIO_AD_00">
+                     <pin_features>
+                        <pin_feature name="speed" value="MHZ_200"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpiomux_io, 08" pin_num="4" pin_signal="GPIO_08">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="ADC_ALT_CLK.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CORE_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.ADC_ACLK_PODF.scale" value="12" locked="true"/>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="false"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM_ANALOG.ENET_500M_REF_CLK" locked="false"/>
+                  <setting id="CCM.SAI1_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.SAI3_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="5e519eed-bd94-4950-84de-0f29de85bcea" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="COMBO_SENSOR" uuid="2342e373-ea2e-4bed-8aa4-bd33509155f6" type="lpi2c" type_id="lpi2c_6b71962515c3208facfccd030afebc98" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="BOARD_BootClockRUN"/>
+                     </config_set>
+                     <config_set name="interrupt_vector"/>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="0d9274fe-8f49-48a8-8e6a-8c3ac009384d" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_BUTTON" uuid="6c9e57cc-d98c-4f6d-bf94-3920a8fd474e" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO2_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_LED" uuid="0f7a142d-ad6c-4e47-a2a3-015e90afa37b" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO1_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO1_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="2a54e709-5718-4b89-8b7b-71cefb418658" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="991327ca-3ad0-49d1-aff3-37b7734338db" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="3e46e698-099c-4180-92f5-2af1abbb93a5" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="27e43a4b-bddb-4db2-8f6b-3f6a73008a27" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="c946fe99-5d76-4cca-8be0-dea3c7861b68" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c18a4299-93be-44e8-b563-3985b3e264c5" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="6149366a-a07f-40a7-8909-00ba459085a7" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="15cc4d18-2002-44a4-b7e7-f681a046f26c" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011_sd/ozone/metro_m7_1011_sd.jdebug b/hw/bsp/imxrt/boards/metro_m7_1011_sd/ozone/metro_m7_1011_sd.jdebug
new file mode 100644
index 000000000..90f9b77e5
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011_sd/ozone/metro_m7_1011_sd.jdebug
@@ -0,0 +1,215 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTraceTiming (50, 50, 50, 50);
+  Project.SetDevice ("MIMXRT1011xxx4A");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("20 MHz");
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M7F.svd");
+  Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd");
+  Project.AddSvdFile ("./MIMXRT1011.svd");
+
+
+  // timing delay for trace pins in pico seconds, default is 2 nano seconds
+
+	File.Open ("../../../../../../examples/cmake-build-metro-m7-1011-sd/device/cdc_msc/cdc_msc.elf");
+}
+
+/*********************************************************************
+*
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging a RAM program on a Cortex-M target device
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  Exec.Reset();
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//
+//    Util.Log("Resetting Program.");
+//
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+
+void BeforeTargetConnect (void) {
+  //
+  // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
+  //
+  //Project.SetJLinkScript("./ST_STM32H743_Traceconfig.pex");
+}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake
new file mode 100644
index 000000000..99681ab12
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake
@@ -0,0 +1,15 @@
+set(MCU_VARIANT MIMXRT1011)
+
+set(JLINK_DEVICE MIMXRT1011xxx5A)
+set(PYOCD_TARGET mimxrt1010)
+set(NXPLINK_DEVICE MIMXRT1011xxxxx:EVK-MIMXRT1010)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1010_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1011DAE5A
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h
index 4f21b52fa..da12075a0 100644
--- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -24,30 +24,24 @@
  * This file is part of the TinyUSB stack.
  */
 
+#ifndef BOARD_MIMXRT1010_EVK_H_
+#define BOARD_MIMXRT1010_EVK_H_
 
-#ifndef BOARD_H_
-#define BOARD_H_
-
-#include "fsl_device_registers.h"
-
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (0x1000000U)
 
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_11_GPIOMUX_IO11
-#define LED_PORT              GPIO1
-#define LED_PIN               11
+// LED: IOMUXC_GPIO_11_GPIOMUX_IO11
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
-// SW8 button
-#define BUTTON_PINMUX         IOMUXC_GPIO_SD_05_GPIO2_IO05
-#define BUTTON_PORT           GPIO2
-#define BUTTON_PIN            5
+// SW8 button: IOMUXC_GPIO_SD_05_GPIO2_IO05
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_GPIO
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_GPIO_PIN
 #define BUTTON_STATE_ACTIVE   0
 
-// UART
+// UART: IOMUXC_GPIO_09_LPUART1_RXD, IOMUXC_GPIO_10_LPUART1_TXD
 #define UART_PORT             LPUART1
-#define UART_RX_PINMUX        IOMUXC_GPIO_09_LPUART1_RXD
-#define UART_TX_PINMUX        IOMUXC_GPIO_10_LPUART1_TXD
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 
-#endif /* BOARD_H_ */
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk
index 17dc01cd9..488a56fdc 100644
--- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk
@@ -2,7 +2,7 @@ CFLAGS += -DCPU_MIMXRT1011DAE5A -DCFG_EXAMPLE_VIDEO_READONLY
 MCU_VARIANT = MIMXRT1011
 
 # For flash-jlink target
-JLINK_DEVICE = MIMXRT1011DAE5A
+JLINK_DEVICE = MIMXRT1011xxx5A
 
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1010
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c
new file mode 100644
index 000000000..1b28b668a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c
@@ -0,0 +1,340 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1010-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: ADC_ALT_CLK.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true}
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5'}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK}
+- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL2.denom, value: '1'}
+- {id: CCM_ANALOG.PLL2.num, value: '0'}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
+    CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0);
+#endif
+    /* Disable ADC_ACLK_EN clock gate. */
+    CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK;
+    /* Set ADC_ACLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_AdcDiv, 11);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */
+    /* Set Pll3 SW clock source to use the USB1 PLL output. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Set safe value of the AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 1);
+    /* Set periph clock2 clock source to use the PLL3_SW_CLK. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h
new file mode 100644
index 000000000..119fd94bd
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h
@@ -0,0 +1,97 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK                40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT              500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY_CLK                 480000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c
new file mode 100644
index 000000000..b960191d1
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.c
@@ -0,0 +1,89 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1010-EVK
+external_user_signals: {}
+pin_labels:
+- {pin_num: '1', pin_signal: GPIO_11, label: GPIO_11, identifier: LED;USERLED;USER_LED}
+power_domains: {NVCC_GPIO: '3.3'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '70', peripheral: GPIO2, signal: 'gpio_io, 05', pin_signal: GPIO_SD_05, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm}
+  - {pin_num: '1', peripheral: GPIO1, signal: 'gpiomux_io, 11', pin_signal: GPIO_11, identifier: USER_LED, direction: OUTPUT}
+  - {pin_num: '3', peripheral: LPUART1, signal: RXD, pin_signal: GPIO_09}
+  - {pin_num: '2', peripheral: LPUART1, signal: TXD, pin_signal: GPIO_10}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  /* GPIO configuration of USER_LED on GPIO_11 (pin 1) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_11 (pin 1) */
+  GPIO_PinInit(GPIO1, 11U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on GPIO_SD_05 (pin 70) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_SD_05 (pin 70) */
+  GPIO_PinInit(GPIO2, 5U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_09_LPUART1_RXD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_10_LPUART1_TXD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_11_GPIOMUX_IO11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_SD_05_GPIO2_IO05, 0x70A0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h
new file mode 100644
index 000000000..0c980150a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/pin_mux.h
@@ -0,0 +1,89 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_SEL_MASK 0x0820U /*!< Select GPIO1 or GPIO2: affected bits mask */
+
+/* GPIO_SD_05 (number 70), USER_BUTTON */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO2   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    5U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   5U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 5U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        5U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 5U)   /*!< PORT pin mask */
+
+/* GPIO_11 (number 1), GPIO_11 */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                gpiomux_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                      11U   /*!< Signal channel */
+
+/* GPIO_09 (number 3), LPUART1_RXD/J56[2] */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_RXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_RXD_SIGNAL                                      RXD   /*!< Signal name */
+
+/* GPIO_10 (number 2), LPUART1_TXD/J56[4] */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_TXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_TXD_SIGNAL                                      TXD   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h
index 4be2760be..bb5a64448 100644
--- a/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h
@@ -18,7 +18,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -26,7 +26,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -123,7 +123,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -184,7 +184,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -252,7 +252,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex
new file mode 100644
index 000000000..701f3e9c3
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex
@@ -0,0 +1,397 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1010-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="f341eb24-9521-4127-8932-81692aeb76df" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1011xxxxx</processor>
+      <package>MIMXRT1011DAE5A</package>
+      <board>MIMXRT1010-EVK</board>
+      <board_revision>A</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="1" pin_signal="GPIO_11" label="GPIO_11" identifier="LED;USERLED;USER_LED"/>
+            </pin_labels>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO2" signal="gpio_io, 05" pin_num="70" pin_signal="GPIO_SD_05">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_47K_Ohm"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpiomux_io, 11" pin_num="1" pin_signal="GPIO_11">
+                     <pin_features>
+                        <pin_feature name="identifier" value="USER_LED"/>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RXD" pin_num="3" pin_signal="GPIO_09"/>
+                  <pin peripheral="LPUART1" signal="TXD" pin_num="2" pin_signal="GPIO_10"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="ADC_ALT_CLK.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CORE_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.ADC_ACLK_PODF.scale" value="12" locked="true"/>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="false"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM_ANALOG.ENET_500M_REF_CLK" locked="false"/>
+                  <setting id="CCM.SAI1_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.SAI3_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="5e519eed-bd94-4950-84de-0f29de85bcea" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="COMBO_SENSOR" uuid="2342e373-ea2e-4bed-8aa4-bd33509155f6" type="lpi2c" type_id="lpi2c_6b71962515c3208facfccd030afebc98" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="BOARD_BootClockRUN"/>
+                     </config_set>
+                     <config_set name="interrupt_vector"/>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="0d9274fe-8f49-48a8-8e6a-8c3ac009384d" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_BUTTON" uuid="6c9e57cc-d98c-4f6d-bf94-3920a8fd474e" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO2_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_LED" uuid="0f7a142d-ad6c-4e47-a2a3-015e90afa37b" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO1_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO1_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="2a54e709-5718-4b89-8b7b-71cefb418658" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="991327ca-3ad0-49d1-aff3-37b7734338db" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="3e46e698-099c-4180-92f5-2af1abbb93a5" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="27e43a4b-bddb-4db2-8f6b-3f6a73008a27" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="c946fe99-5d76-4cca-8be0-dea3c7861b68" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c18a4299-93be-44e8-b563-3985b3e264c5" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="6149366a-a07f-40a7-8909-00ba459085a7" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="15cc4d18-2002-44a4-b7e7-f681a046f26c" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.cmake
new file mode 100644
index 000000000..becad46d4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.cmake
@@ -0,0 +1,15 @@
+set(MCU_VARIANT MIMXRT1015)
+
+set(JLINK_DEVICE MIMXRT1015DAF5A)
+set(PYOCD_TARGET mimxrt1015)
+set(NXPLINK_DEVICE MIMXRT1015xxxxx:EVK-MIMXRT1015)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1015_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1015DAF5A
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h
index 932ce7fd7..6ac78453f 100644
--- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -24,28 +24,28 @@
  * This file is part of the TinyUSB stack.
  */
 
+#ifndef BOARD_MIMXRT1015_EVK_H_
+#define BOARD_MIMXRT1015_EVK_H_
 
-#ifndef BOARD_H_
-#define BOARD_H_
-
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (0x1000000U)
 
 // LED
 #define LED_PINMUX            IOMUXC_GPIO_SD_B1_01_GPIO3_IO21
-#define LED_PORT              GPIO3
-#define LED_PIN               21
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
 // SW8 button
 #define BUTTON_PINMUX         IOMUXC_GPIO_EMC_09_GPIO2_IO09
-#define BUTTON_PORT           GPIO2
-#define BUTTON_PIN            9
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_GPIO
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_GPIO_PIN
 #define BUTTON_STATE_ACTIVE   0
 
 // UART
 #define UART_PORT             LPUART1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 #define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_07_LPUART1_RX
 #define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_06_LPUART1_TX
 
-#endif /* BOARD_H_ */
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c
new file mode 100644
index 000000000..ae1aa7fb1
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c
@@ -0,0 +1,357 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1015xxxxx
+package_id: MIMXRT1015DAF5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1015-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 2160/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 352/3 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '1', locked: true}
+- {id: CCM.CLKO2_SEL.sel, value: CCM.LPI2C_CLK_ROOT}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF}
+- {id: CCM.SEMC_PODF.scale, value: '2'}
+- {id: CCM.TRACE_PODF.scale, value: '3', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 0);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 1);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 2);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 2);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(6);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h
new file mode 100644
index 000000000..2acdb16a7
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h
@@ -0,0 +1,100 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               500000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           196363636UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             117333333UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c
new file mode 100644
index 000000000..97224a332
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.c
@@ -0,0 +1,118 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1015xxxxx
+package_id: MIMXRT1015DAF5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1015-EVK
+external_user_signals: {}
+pin_labels:
+- {pin_num: '21', pin_signal: GPIO_SD_B1_01, label: GPIO SD_B1_01, identifier: USER_LED}
+power_domains: {NVCC_GPIO: '3.3'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '1', peripheral: GPIO2, signal: 'gpio_io, 09', pin_signal: GPIO_EMC_09, direction: INPUT, pull_keeper_select: Pull, pull_up_down_config: Pull_Up_47K_Ohm}
+  - {pin_num: '68', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07, pull_up_down_config: Pull_Down_100K_Ohm}
+  - {pin_num: '72', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06}
+  - {pin_num: '21', peripheral: GPIO3, signal: 'gpio_io, 21', pin_signal: GPIO_SD_B1_01, direction: OUTPUT}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  /* GPIO configuration of USER_BUTTON on GPIO_EMC_09 (pin 1) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_EMC_09 (pin 1) */
+  GPIO_PinInit(GPIO2, 9U, &USER_BUTTON_config);
+
+  /* GPIO configuration of USER_LED on GPIO_SD_B1_01 (pin 21) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_SD_B1_01 (pin 21) */
+  GPIO_PinInit(GPIO3, 21U, &USER_LED_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_GPIO2_IO09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_GPIO3_IO21, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0x10B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_09_GPIO2_IO09, 0x70B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '12', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: '11', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: '9', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: '10', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: '13', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: '8', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B, 0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h
new file mode 100644
index 000000000..c9cbe3b72
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/pin_mux.h
@@ -0,0 +1,133 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/* GPIO_EMC_09 (number 1), USER_BUTTON */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO2   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    9U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   9U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 9U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        9U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 9U)   /*!< PORT pin mask */
+
+/* GPIO_AD_B0_07 (number 68), LPUART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_RXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_RXD_SIGNAL                                       RX   /*!< Signal name */
+
+/* GPIO_AD_B0_06 (number 72), LPUART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_UART1_TXD_PERIPHERAL                              LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_UART1_TXD_SIGNAL                                       TX   /*!< Signal name */
+
+/* GPIO_SD_B1_01 (number 21), GPIO SD_B1_01 */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO3   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                      21U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO3   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                     21U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                        (1U << 21U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO3   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                          21U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                             (1U << 21U)   /*!< PORT pin mask */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_SD_B1_07 (number 12), FlexSPI_CLK_A/U13[6] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_08 (number 11), FlexSPI_D0_A/U13[5] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (number 9), FlexSPI_D1_A/U13[2] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (number 10), FlexSPI_D2_A/U13[3] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (number 13), FlexSPI_D3_A/U13[7] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (number 8), FlexSPI_SS0/U13[1] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h
index 94af5a115..f1415aeec 100644
--- a/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h
@@ -18,7 +18,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -26,7 +26,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -124,7 +124,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -185,7 +185,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -253,7 +253,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex
new file mode 100644
index 000000000..88265d32e
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex
@@ -0,0 +1,448 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1015-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="4be4468a-3124-4ac9-9d4f-05d5f8ad6399" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1015xxxxx</processor>
+      <package>MIMXRT1015DAF5A</package>
+      <board>MIMXRT1015-EVK</board>
+      <board_revision>B</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="21" pin_signal="GPIO_SD_B1_01" label="GPIO SD_B1_01" identifier="USER_LED"/>
+            </pin_labels>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO2" signal="gpio_io, 09" pin_num="1" pin_signal="GPIO_EMC_09">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_47K_Ohm"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="68" pin_signal="GPIO_AD_B0_07">
+                     <pin_features>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="72" pin_signal="GPIO_AD_B0_06"/>
+                  <pin peripheral="GPIO3" signal="gpio_io, 21" pin_num="21" pin_signal="GPIO_SD_B1_01">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="12" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="11" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="9" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="10" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="13" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="8" pin_signal="GPIO_SD_B1_11"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="2160/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="352/3 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.CLKO2_SEL.sel" value="CCM.LPI2C_CLK_ROOT" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM.ARM_PODF" locked="false"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="2" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>N/A</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="57fc488c-a9f7-4a03-8ab3-5d2a3fd16a50" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="DEBUG_UART" uuid="600d7aee-5a2d-4373-9763-ce007b981c15" type="lpuart" type_id="lpuart_bebe3e12b6ec22bbd14199038f2bf459" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="COMBO_SENSOR" uuid="96f9e552-25e5-434a-9454-5cf9e614733d" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_LED" uuid="5592aac0-ced9-4284-88a8-bbeb5083a92f" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO3" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO3_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO3_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_BUTTON" uuid="e7774953-3606-41b8-8b72-6e09025369e0" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO2_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO2_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="0329fbca-00e5-4ec4-9f79-3cb65a7b267a" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="59cf1b09-8396-4bf9-bed6-03d5457c292f" type_id="system_54b53072540eeeb8f8e9343e71f28176">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="7d589e9f-7522-408c-b7c8-42770920766f" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="e9da5e16-1f55-49be-87ec-af8cfd4a4105" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="9dc7a034-9408-4852-9990-a713693635ee" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="28ec81a8-d7ea-4363-9330-20b877c481f6" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="774dd0a0-63ed-4846-b9d7-dfd082d810e3" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="77cd333e-4adc-4c6e-8b18-bbe349d78182" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>N/A</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake
new file mode 100644
index 000000000..39c94147c
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT MIMXRT1021)
+
+set(JLINK_DEVICE MIMXRT1021xxx5A)
+set(PYOCD_TARGET mimxrt1020)
+set(NXPLINK_DEVICE MIMXRT1021xxxxx:EVK-MIMXRT1020)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1020_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1021DAG5A
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h
index 56ed5855b..4f4593524 100644
--- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -24,28 +24,24 @@
  * This file is part of the TinyUSB stack.
  */
 
+#ifndef BOARD_MIMXRT1020_EVK_H_
+#define BOARD_MIMXRT1020_EVK_H_
 
-#ifndef BOARD_H_
-#define BOARD_H_
-
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (0x800000U)
 
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_AD_B0_05_GPIO1_IO05
-#define LED_PORT              GPIO1
-#define LED_PIN               5
+// LED: IOMUXC_GPIO_AD_B0_05_GPIO1_IO05
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
-// SW8 button
-#define BUTTON_PINMUX         IOMUXC_SNVS_WAKEUP_GPIO5_IO00
-#define BUTTON_PORT           GPIO5
-#define BUTTON_PIN            0
+// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_GPIO
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_GPIO_PIN
 #define BUTTON_STATE_ACTIVE   0
 
-// UART
+// UART: IOMUXC_GPIO_AD_B0_07_LPUART1_RX, IOMUXC_GPIO_AD_B0_06_LPUART1_TX
 #define UART_PORT             LPUART1
-#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_07_LPUART1_RX
-#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_06_LPUART1_TX
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 
-#endif /* BOARD_H_ */
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk
index b15da1b67..e269c8ac5 100644
--- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk
@@ -2,7 +2,7 @@ CFLAGS += -DCPU_MIMXRT1021DAG5A
 MCU_VARIANT = MIMXRT1021
 
 # For flash-jlink target
-JLINK_DEVICE = MIMXRT1021DAG5A
+JLINK_DEVICE = MIMXRT1021xxx5A
 
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1020
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c
new file mode 100644
index 000000000..764042928
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c
@@ -0,0 +1,421 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1021xxxxx
+package_id: MIMXRT1021DAG5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1020-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 176 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 176 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL2_PFD2_CLK}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM.USDHC1_PODF.scale, value: '3', locked: true}
+- {id: CCM.USDHC2_PODF.scale, value: '3', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_ENET_ENABLE_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput = false,                 /* Disable the PLL providing the ENET 125MHz reference clock */
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .enableClkOutput25M = false,              /* Disable the PLL providing the ENET 25MHz reference clock */
+        .loopDivider = 1,                         /* Set frequency of ethernet reference clock to 50 MHz */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 0);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 2);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 2);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 2);
+#endif
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(3);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK)
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK;
+#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK)
+    /* Backward compatibility for original bitfield name */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+#else
+#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined."
+#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h
new file mode 100644
index 000000000..d678a4f66
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h
@@ -0,0 +1,108 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               500000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           0UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              62500000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            176000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            176000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.c
new file mode 100644
index 000000000..07d910c2c
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.c
@@ -0,0 +1,342 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1021xxxxx
+package_id: MIMXRT1021DAG5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1020-EVK
+external_user_signals: {}
+pin_labels:
+- {pin_num: '52', pin_signal: WAKEUP, label: USER_BUTTON, identifier: USER_BUTTON}
+- {pin_num: '106', pin_signal: GPIO_AD_B0_05, label: 'JTAG_nTRST/J16[3]/USER_LED/J17[5]', identifier: USER_LED}
+power_domains: {NVCC_GPIO: '3.3'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '52', peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT}
+  - {pin_num: '106', peripheral: GPIO1, signal: 'gpio_io, 05', pin_signal: GPIO_AD_B0_05, direction: OUTPUT, pull_keeper_select: Keeper}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+  CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
+
+  /* GPIO configuration of USER_LED on GPIO_AD_B0_05 (pin 106) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_AD_B0_05 (pin 106) */
+  GPIO_PinInit(GPIO1, 5U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on WAKEUP (pin 52) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on WAKEUP (pin 52) */
+  GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_05_GPIO1_IO05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_05_GPIO1_IO05, 0x50A0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07}
+  - {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitDEBUG_UARTPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_06_LPUART1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_07_LPUART1_RX, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitSDRAMPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '142', peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_16}
+  - {pin_num: '141', peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_17}
+  - {pin_num: '140', peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_18}
+  - {pin_num: '139', peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_19}
+  - {pin_num: '138', peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_20}
+  - {pin_num: '136', peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_22}
+  - {pin_num: '137', peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_21}
+  - {pin_num: '133', peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_23}
+  - {pin_num: '132', peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_24}
+  - {pin_num: '131', peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_25}
+  - {pin_num: '143', peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_15}
+  - {pin_num: '130', peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_26}
+  - {pin_num: '129', peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_27}
+  - {pin_num: '2', peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_13}
+  - {pin_num: '1', peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_14}
+  - {pin_num: '7', peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_10}
+  - {pin_num: '127', peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_29}
+  - {pin_num: '126', peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_30}
+  - {pin_num: '3', peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_12}
+  - {pin_num: '8', peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_09}
+  - {pin_num: '4', peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_11}
+  - {pin_num: '128', peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_28}
+  - {pin_num: '125', peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_31}
+  - {pin_num: '9', peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
+  - {pin_num: '117', peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_39}
+  - {pin_num: '118', peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_38}
+  - {pin_num: '119', peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_37}
+  - {pin_num: '120', peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_36}
+  - {pin_num: '122', peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_34}
+  - {pin_num: '121', peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_35}
+  - {pin_num: '123', peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_33}
+  - {pin_num: '124', peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_32}
+  - {pin_num: '10', peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
+  - {pin_num: '12', peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
+  - {pin_num: '13', peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
+  - {pin_num: '14', peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
+  - {pin_num: '15', peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
+  - {pin_num: '16', peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
+  - {pin_num: '17', peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
+  - {pin_num: '18', peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitSDRAMPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitSDRAMPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_WE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_CAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_RAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_CS0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_BA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_BA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_ADDR05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_ADDR06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_ADDR08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_ADDR09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_ADDR11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_ADDR12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_DQS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CKE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DM01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA13, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DATA14, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DATA15, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCANPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '32', peripheral: CAN1, signal: RX, pin_signal: GPIO_SD_B1_01}
+  - {pin_num: '33', peripheral: CAN1, signal: TX, pin_signal: GPIO_SD_B1_00}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCANPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCANPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_00_FLEXCAN1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_FLEXCAN1_RX, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitENETPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '97', peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_AD_B0_11}
+  - {pin_num: '84', peripheral: GPIO1, signal: 'gpio_io, 22', pin_signal: GPIO_AD_B1_06}
+  - {pin_num: '107', peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
+  - {pin_num: '100', peripheral: ENET, signal: enet_tx_clk, pin_signal: GPIO_AD_B0_08}
+  - {pin_num: '95', peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_AD_B0_13}
+  - {pin_num: '93', peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_AD_B0_15}
+  - {pin_num: '94', peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_AD_B0_14}
+  - {pin_num: '96', peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_AD_B0_12}
+  - {pin_num: '99', peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_AD_B0_09}
+  - {pin_num: '98', peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_AD_B0_10}
+  - {pin_num: '116', peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_40}
+  - {pin_num: '115', peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_41}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitENETPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitENETPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_08_ENET_TX_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_ENET_RDATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_10_ENET_RDATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_11_ENET_RX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_ENET_RX_ER, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_ENET_TX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_ENET_TDATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_ENET_TDATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDIO, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDC, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitUSDHCPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '45', peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_03}
+  - {pin_num: '46', peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_02}
+  - {pin_num: '43', peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_04}
+  - {pin_num: '42', peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_05}
+  - {pin_num: '48', peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_00}
+  - {pin_num: '47', peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_01}
+  - {pin_num: '41', peripheral: GPIO3, signal: 'gpio_io, 19', pin_signal: GPIO_SD_B0_06}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitUSDHCPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitUSDHCPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_CMD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_06_GPIO3_IO19, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '24', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: '23', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: '21', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: '22', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: '25', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: '19', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B, 0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.h
new file mode 100644
index 000000000..4155c56ec
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/pin_mux.h
@@ -0,0 +1,542 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/* WAKEUP (number 52), USER_BUTTON */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO5   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    0U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO5   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   0U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 0U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO5   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        0U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 0U)   /*!< PORT pin mask */
+
+/* GPIO_AD_B0_05 (number 106), JTAG_nTRST/J16[3]/USER_LED/J17[5] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       5U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                      5U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                         (1U << 5U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                           5U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                              (1U << 5U)   /*!< PORT pin mask */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_07 (number 101), UART1_RXD/J17[4] */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< Signal name */
+
+/* GPIO_AD_B0_06 (number 105), UART1_TXD/J17[6] */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_EMC_16 (number 142), SEMC_A0/U14[23]/BOOT_MODE[0] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_EMC_17 (number 141), SEMC_A1/U14[24]/BOOT_MODE[1] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_18 (number 140), SEMC_A2/U14[25]/BT_CFG[0] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_19 (number 139), SEMC_A3/U14[26]/BT_CFG[1] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_20 (number 138), SEMC_A4/U14[29]/BT_CFG[2] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_22 (number 136), SEMC_A6/U14[31]/BT_CFG[4] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_21 (number 137), SEMC_A5/U14[30]/BT_CFG[3] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_23 (number 133), SEMC_A7/U14[32]/BT_CFG[5] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_24 (number 132), SEMC_A8/U14[33]/BT_CFG[6] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_25 (number 131), SEMC_A9/U14[34]/BT_CFG[7] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_15 (number 143), SEMC_A10/U14[22] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_26 (number 130), SEMC_A11/U14[35]/BT_CFG[8] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_27 (number 129), SEMC_A12/U14[36]/BT_CFG[9] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_13 (number 2), SEMC_BA0/U14[20] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_14 (number 1), SEMC_BA1/U14[21] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_10 (number 7), SEMC_CAS/U14[17] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL                             semc_cas   /*!< Signal name */
+
+/* GPIO_EMC_29 (number 127), SEMC_CKE/U14[37] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL                             semc_cke   /*!< Signal name */
+
+/* GPIO_EMC_30 (number 126), SEMC_CLK/U14[38] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL                             semc_clk   /*!< Signal name */
+
+/* GPIO_EMC_12 (number 3), SEMC_CS0/U14[19] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL                                   CS   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_09 (number 8), SEMC_WE/U14[16] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL                               semc_we   /*!< Signal name */
+
+/* GPIO_EMC_11 (number 4), SEMC_RAS/U14[18] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL                             semc_ras   /*!< Signal name */
+
+/* GPIO_EMC_28 (number 128), SEMC_DQS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL                             semc_dqs   /*!< Signal name */
+
+/* GPIO_EMC_31 (number 125), SEMC_DM1/U14[39] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_08 (number 9), SEMC_DM0/U14[15] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_39 (number 117), SEMC_D15/U14[53] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL                                 15U   /*!< Signal channel */
+
+/* GPIO_EMC_38 (number 118), SEMC_D14/U14[51] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL                                 14U   /*!< Signal channel */
+
+/* GPIO_EMC_37 (number 119), SEMC_D13/U14[50] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL                                 13U   /*!< Signal channel */
+
+/* GPIO_EMC_36 (number 120), SEMC_D12/U14[48] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_34 (number 122), SEMC_D10/U14[45] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_35 (number 121), SEMC_D11/U14[47] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_33 (number 123), SEMC_D9/U14[44] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_32 (number 124), SEMC_D8/U14[42] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_07 (number 10), SEMC_D7/U14[13] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_06 (number 12), SEMC_D6/U14[11] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_05 (number 13), SEMC_D5/U14[10] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_04 (number 14), SEMC_D4/U14[8] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_03 (number 15), SEMC_D3/U14[7] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_02 (number 16), SEMC_D2/U14[5] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_01 (number 17), SEMC_D1/U14[4] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_00 (number 18), SEMC_D0/U14[2] */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL                                   0U   /*!< Signal channel */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitSDRAMPins(void);
+
+/* GPIO_SD_B1_01 (number 32), CAN1_RX/U9[4] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN1_RX_PERIPHERAL                                CAN1   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN1_RX_SIGNAL                                      RX   /*!< Signal name */
+
+/* GPIO_SD_B1_00 (number 33), CAN1_TX/U9[1] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN1_TX_PERIPHERAL                                CAN1   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN1_TX_SIGNAL                                      TX   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCANPins(void);
+
+/* GPIO_AD_B0_11 (number 97), ENET_CRS_DV/U11[18]/J19[3] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL                         enet_rx_en   /*!< Signal name */
+
+/* GPIO_AD_B1_06 (number 84), ENET_INT/U11[21]/J17[8] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_INT_PERIPHERAL                             GPIO1   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_INT_SIGNAL                               gpio_io   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_INT_CHANNEL                                  22U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITENETPINS_ENET_INT_GPIO                                   GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITENETPINS_ENET_INT_GPIO_PIN                                 22U   /*!< GPIO pin number */
+#define BOARD_INITENETPINS_ENET_INT_GPIO_PIN_MASK                    (1U << 22U)   /*!< GPIO pin mask */
+#define BOARD_INITENETPINS_ENET_INT_PORT                                   GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITENETPINS_ENET_INT_PIN                                      22U   /*!< PORT pin number */
+#define BOARD_INITENETPINS_ENET_INT_PIN_MASK                         (1U << 22U)   /*!< PORT pin mask */
+
+/* GPIO_AD_B0_04 (number 107), JTAG_TDO/J16[13]/ENET_RST/U11[32] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RST_PERIPHERAL                             GPIO1   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RST_SIGNAL                               gpio_io   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RST_CHANNEL                                   4U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITENETPINS_ENET_RST_GPIO                                   GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITENETPINS_ENET_RST_GPIO_PIN                                  4U   /*!< GPIO pin number */
+#define BOARD_INITENETPINS_ENET_RST_GPIO_PIN_MASK                     (1U << 4U)   /*!< GPIO pin mask */
+#define BOARD_INITENETPINS_ENET_RST_PORT                                   GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITENETPINS_ENET_RST_PIN                                       4U   /*!< PORT pin number */
+#define BOARD_INITENETPINS_ENET_RST_PIN_MASK                          (1U << 4U)   /*!< PORT pin mask */
+
+/* GPIO_AD_B0_08 (number 100), ENET_TX_CLK/U11[9] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL                        enet_tx_clk   /*!< Signal name */
+
+/* GPIO_AD_B0_13 (number 95), ENET_TXEN/U11[23]/J19[5] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL                           enet_tx_en   /*!< Signal name */
+
+/* GPIO_AD_B0_15 (number 93), ENET_TXD1/U11[25]/J19[2] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_AD_B0_14 (number 94), ENET_TXD0/U11[24]/J17[7] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_AD_B0_12 (number 96), ENET_RXER/U11[20]/J19[4] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXER_SIGNAL                           enet_rx_er   /*!< Signal name */
+
+/* GPIO_AD_B0_09 (number 99), ENET_RXD1/U11[15]/J17[3] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_AD_B0_10 (number 98), ENET_RXD0/U11[16]/J19[6] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_40 (number 116), ENET_MDIO/U11[11] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL                            enet_mdio   /*!< Signal name */
+
+/* GPIO_EMC_41 (number 115), ENET_MDC/U11[12] */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL                              ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDC_SIGNAL                              enet_mdc   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitENETPins(void);
+
+/* GPIO_SD_B0_03 (number 45), SD1_CLK/J15[5] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL                             usdhc_clk   /*!< Signal name */
+
+/* GPIO_SD_B0_02 (number 46), SD1_CMD/J15[3] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL                             usdhc_cmd   /*!< Signal name */
+
+/* GPIO_SD_B0_04 (number 43), SD1_D0/J15[7] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_SD_B0_05 (number 42), SD1_D1/J15[8] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_SD_B0_00 (number 48), SD1_D2/J15[1] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_SD_B0_01 (number 47), SD1_D3/J15[2] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_SD_B0_06 (number 41), SD_CD_SW/J15[9] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_PERIPHERAL                            GPIO3   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_SIGNAL                              gpio_io   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_CHANNEL                                 19U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO                                  GPIO3   /*!< GPIO peripheral base pointer */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO_PIN                                19U   /*!< GPIO pin number */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO_PIN_MASK                   (1U << 19U)   /*!< GPIO pin mask */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_PORT                                  GPIO3   /*!< PORT peripheral base pointer */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_PIN                                     19U   /*!< PORT pin number */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_PIN_MASK                        (1U << 19U)   /*!< PORT pin mask */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitUSDHCPins(void);
+
+/* GPIO_SD_B1_07 (number 24), FlexSPI_CLK/U13[6] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_08 (number 23), FlexSPI_D0_A/U13[5] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (number 21), FlexSPI_D1_A/U13[2] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (number 22), FlexSPI_D2_A/U13[3] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (number 25), FlexSPI_D3_A/U13[7] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (number 19), FlexSPI_SS0/U13[1] */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h
index f5e1aca5c..ad79d5002 100644
--- a/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h
@@ -18,7 +18,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -26,7 +26,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -124,7 +124,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -185,7 +185,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -253,7 +253,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex
new file mode 100644
index 000000000..4437a420e
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex
@@ -0,0 +1,628 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1020-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="a558cc6e-82c2-41f9-9f55-0348efc7896f" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1021xxxxx</processor>
+      <package>MIMXRT1021DAG5A</package>
+      <board>MIMXRT1020-EVK</board>
+      <board_revision>A3</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="52" pin_signal="WAKEUP" label="USER_BUTTON" identifier="USER_BUTTON"/>
+               <pin_label pin_num="106" pin_signal="GPIO_AD_B0_05" label="JTAG_nTRST/J16[3]/USER_LED/J17[5]" identifier="USER_LED"/>
+            </pin_labels>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO5" description="Peripheral GPIO5 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO5" signal="gpio_io, 00" pin_num="52" pin_signal="WAKEUP">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 05" pin_num="106" pin_signal="GPIO_AD_B0_05">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="101" pin_signal="GPIO_AD_B0_07"/>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="105" pin_signal="GPIO_AD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="142" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="141" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="140" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="139" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="138" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="136" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="137" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="133" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="132" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="131" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="143" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="130" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="129" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="2" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="1" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="7" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="127" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="126" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="3" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="8" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="4" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="128" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="125" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="9" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="117" pin_signal="GPIO_EMC_39"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="118" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="119" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="120" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="122" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="121" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="123" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="124" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="10" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="12" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="13" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="14" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="15" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="16" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="17" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="18" pin_signal="GPIO_EMC_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN1" description="Peripheral CAN1 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN1" signal="RX" pin_num="32" pin_signal="GPIO_SD_B1_01"/>
+                  <pin peripheral="CAN1" signal="TX" pin_num="33" pin_signal="GPIO_SD_B1_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="97" pin_signal="GPIO_AD_B0_11"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 22" pin_num="84" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="107" pin_signal="GPIO_AD_B0_04"/>
+                  <pin peripheral="ENET" signal="enet_tx_clk" pin_num="100" pin_signal="GPIO_AD_B0_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="95" pin_signal="GPIO_AD_B0_13"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="93" pin_signal="GPIO_AD_B0_15"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="94" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="96" pin_signal="GPIO_AD_B0_12"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="99" pin_signal="GPIO_AD_B0_09"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="98" pin_signal="GPIO_AD_B0_10"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="116" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="115" pin_signal="GPIO_EMC_41"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="45" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="46" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="43" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="42" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="48" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="47" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="GPIO3" signal="gpio_io, 19" pin_num="41" pin_signal="GPIO_SD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="24" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="23" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="21" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="22" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="25" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="19" pin_signal="GPIO_SD_B1_11"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL2_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM.ARM_PODF" locked="false"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.USDHC1_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM.USDHC2_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENABLE_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/dcd.c" update_enabled="true"/>
+            <file path="board/dcd.h" update_enabled="true"/>
+         </generated_project_files>
+         <dcdx_profile>
+            <processor_version>13.0.2</processor_version>
+            <output_format>c_array</output_format>
+         </dcdx_profile>
+         <dcdx_configurations>
+            <dcdx_configuration name="Device_configuration">
+               <description></description>
+               <options/>
+               <command_groups/>
+            </dcdx_configuration>
+         </dcdx_configurations>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="6d394465-bc9b-47f2-9a1f-3ca61f76d27b" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="d0b30ebd-b05e-42b2-8e94-40b1625c2dba" type="flexcan" type_id="flexcan_10d80efac19b25dcd240244aae88dca0" mode="interrupts" peripheral="CAN1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="wakeupSrc" value="kFLEXCAN_WakeupSrcUnfiltered"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableTimerSync" value="true"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="27a94726-61ef-42ac-b517-d1eda3853dfe" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="e2a4cccd-cb23-4714-8c90-022fcf6146e8" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="bd191d83-2cb2-40ed-a718-47b39d772006" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="d097438f-179b-43e0-b37c-aee31212cebd" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="d84400f7-fd84-4466-908a-04abca190ef6" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="4f0123a9-0338-4076-b275-b49951642704" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="18150193-6d2b-469f-88e5-4908669bf3e5" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="602159e8-d65b-45d3-b63b-cd33be549134" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="eb963b89-5367-4d86-8885-82b4b8cff735" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+      <common name="common" version="1.0" enabled="true" update_project_code="true">
+         <core name="core0" role="primary" project_name="Project"/>
+      </common>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake
new file mode 100644
index 000000000..45487d148
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake
@@ -0,0 +1,16 @@
+set(MCU_VARIANT MIMXRT1024)
+
+set(JLINK_DEVICE MIMXRT1024xxx5A)
+set(PYOCD_TARGET mimxrt1024)
+set(NXPLINK_DEVICE MIMXRT1024xxxxx:MIMXRT1024-EVK)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1024_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1024DAG5A
+    CFG_EXAMPLE_VIDEO_READONLY
+    #-Wno-error=array-bounds
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h
new file mode 100644
index 000000000..27a64b464
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h
@@ -0,0 +1,48 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_MIMXRT1024_EVK_H_
+#define BOARD_MIMXRT1024_EVK_H_
+
+// required since iMXRT MCUX-SDK include this file for board size
+// RT1020-EVK #define BOARD_FLASH_SIZE (0x800000U)
+#define BOARD_FLASH_SIZE (0x400000U) // builtin flash of RT1024
+
+// LED: IOMUXC_GPIO_AD_B1_08_GPIO1_IO24
+#define LED_PORT              BOARD_INITPINS_USER_LED_GPIO
+#define LED_PIN               BOARD_INITPINS_USER_LED_PIN
+#define LED_STATE_ON          1
+
+// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_GPIO
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_PIN
+#define BUTTON_STATE_ACTIVE   0
+
+// UART: IOMUXC_GPIO_AD_B0_07_LPUART1_RX, IOMUXC_GPIO_AD_B0_06_LPUART1_TX
+#define UART_PORT             LPUART1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
+
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk
new file mode 100644
index 000000000..3c325cc93
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk
@@ -0,0 +1,14 @@
+CFLAGS += -DCPU_MIMXRT1024DAG5A
+MCU_VARIANT = MIMXRT1024
+
+# warnings caused by mcu driver
+CFLAGS += -Wno-error=array-bounds
+
+# For flash-jlink target
+JLINK_DEVICE = MIMXRT1024xxx5A
+
+# For flash-pyocd target
+PYOCD_TARGET = mimxrt1024
+
+# flash using pyocd
+flash: flash-pyocd
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c
new file mode 100644
index 000000000..ba0cadafa
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c
@@ -0,0 +1,421 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1024xxxxx
+package_id: MIMXRT1024DAG5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1024-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 176 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 176 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL2_PFD2_CLK}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM.USDHC1_PODF.scale, value: '3', locked: true}
+- {id: CCM.USDHC2_PODF.scale, value: '3', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_ENET_ENABLE_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput = false,                 /* Disable the PLL providing the ENET 125MHz reference clock */
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .enableClkOutput25M = false,              /* Disable the PLL providing the ENET 25MHz reference clock */
+        .loopDivider = 1,                         /* Set frequency of ethernet reference clock to 50 MHz */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 0);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 2);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 2);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 2);
+#endif
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(3);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK)
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK;
+#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK)
+    /* Backward compatibility for original bitfield name */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+#else
+#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined."
+#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h
new file mode 100644
index 000000000..d678a4f66
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h
@@ -0,0 +1,108 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               500000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           0UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              62500000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            176000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            176000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.c
new file mode 100644
index 000000000..29a9d8d3d
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.c
@@ -0,0 +1,490 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1024xxxxx
+package_id: MIMXRT1024DAG5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1024-EVK
+pin_labels:
+- {pin_num: '52', pin_signal: WAKEUP, label: USER_BUTTON, identifier: USER_BUTTON}
+- {pin_num: '82', pin_signal: GPIO_AD_B1_08, label: 'UART_TX/USER_LED/J17[4]', identifier: USER_LED}
+power_domains: {NVCC_GPIO: '3.3'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+
+/* GPIO_AD_B1_00~GPIO_AD_B1_05 can only be configured as flexspi function. Note that it can't be modified here */
+    IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_FLEXSPI_A_DATA03,1U);
+    IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_FLEXSPI_A_SCLK,1U);
+    IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_02_FLEXSPI_A_DATA00,1U);
+    IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_03_FLEXSPI_A_DATA02,1U);
+    IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_FLEXSPI_A_DATA01,1U);
+    IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_FLEXSPI_A_SS0_B,1U);
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '52', peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT}
+  - {pin_num: '82', peripheral: GPIO1, signal: 'gpio_io, 24', pin_signal: GPIO_AD_B1_08, direction: OUTPUT}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+  CLOCK_EnableClock(kCLOCK_IomuxcSnvs);       /* iomuxc_snvs clock (iomuxc_snvs_clk_enable): 0x03U */
+
+  /* GPIO configuration of USER_LED on GPIO_AD_B1_08 (pin 82) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_AD_B1_08 (pin 82) */
+  GPIO_PinInit(GPIO1, 24U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on WAKEUP (pin 52) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on WAKEUP (pin 52) */
+  GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B1_08_GPIO1_IO24,        /* GPIO_AD_B1_08 is configured as GPIO1_IO24 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_SNVS_WAKEUP_GPIO5_IO00,          /* WAKEUP is configured as GPIO5_IO00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '101', peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_07}
+  - {pin_num: '105', peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_06}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitDEBUG_UARTPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_06_LPUART1_TX,        /* GPIO_AD_B0_06 is configured as LPUART1_TX */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_07_LPUART1_RX,        /* GPIO_AD_B0_07 is configured as LPUART1_RX */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitSDRAMPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '142', peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_16}
+  - {pin_num: '141', peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_17}
+  - {pin_num: '140', peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_18}
+  - {pin_num: '139', peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_19}
+  - {pin_num: '138', peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_20}
+  - {pin_num: '136', peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_22}
+  - {pin_num: '137', peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_21}
+  - {pin_num: '133', peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_23}
+  - {pin_num: '132', peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_24}
+  - {pin_num: '131', peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_25}
+  - {pin_num: '143', peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_15}
+  - {pin_num: '130', peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_26}
+  - {pin_num: '129', peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_27}
+  - {pin_num: '2', peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_13}
+  - {pin_num: '1', peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_14}
+  - {pin_num: '7', peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_10}
+  - {pin_num: '127', peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_29}
+  - {pin_num: '126', peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_30}
+  - {pin_num: '3', peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_12}
+  - {pin_num: '8', peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_09}
+  - {pin_num: '4', peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_11}
+  - {pin_num: '128', peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_28}
+  - {pin_num: '125', peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_31}
+  - {pin_num: '9', peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
+  - {pin_num: '117', peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_39}
+  - {pin_num: '118', peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_38}
+  - {pin_num: '119', peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_37}
+  - {pin_num: '120', peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_36}
+  - {pin_num: '122', peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_34}
+  - {pin_num: '121', peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_35}
+  - {pin_num: '123', peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_33}
+  - {pin_num: '124', peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_32}
+  - {pin_num: '10', peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
+  - {pin_num: '12', peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
+  - {pin_num: '13', peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
+  - {pin_num: '14', peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
+  - {pin_num: '15', peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
+  - {pin_num: '16', peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
+  - {pin_num: '17', peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
+  - {pin_num: '18', peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitSDRAMPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitSDRAMPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_00_SEMC_DATA00,         /* GPIO_EMC_00 is configured as SEMC_DATA00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_01_SEMC_DATA01,         /* GPIO_EMC_01 is configured as SEMC_DATA01 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_02_SEMC_DATA02,         /* GPIO_EMC_02 is configured as SEMC_DATA02 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_03_SEMC_DATA03,         /* GPIO_EMC_03 is configured as SEMC_DATA03 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_04_SEMC_DATA04,         /* GPIO_EMC_04 is configured as SEMC_DATA04 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_05_SEMC_DATA05,         /* GPIO_EMC_05 is configured as SEMC_DATA05 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_06_SEMC_DATA06,         /* GPIO_EMC_06 is configured as SEMC_DATA06 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_07_SEMC_DATA07,         /* GPIO_EMC_07 is configured as SEMC_DATA07 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_08_SEMC_DM00,           /* GPIO_EMC_08 is configured as SEMC_DM00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_09_SEMC_WE,             /* GPIO_EMC_09 is configured as SEMC_WE */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_10_SEMC_CAS,            /* GPIO_EMC_10 is configured as SEMC_CAS */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_11_SEMC_RAS,            /* GPIO_EMC_11 is configured as SEMC_RAS */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_12_SEMC_CS0,            /* GPIO_EMC_12 is configured as SEMC_CS0 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_13_SEMC_BA0,            /* GPIO_EMC_13 is configured as SEMC_BA0 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_14_SEMC_BA1,            /* GPIO_EMC_14 is configured as SEMC_BA1 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_15_SEMC_ADDR10,         /* GPIO_EMC_15 is configured as SEMC_ADDR10 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_16_SEMC_ADDR00,         /* GPIO_EMC_16 is configured as SEMC_ADDR00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_17_SEMC_ADDR01,         /* GPIO_EMC_17 is configured as SEMC_ADDR01 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_18_SEMC_ADDR02,         /* GPIO_EMC_18 is configured as SEMC_ADDR02 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_19_SEMC_ADDR03,         /* GPIO_EMC_19 is configured as SEMC_ADDR03 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_20_SEMC_ADDR04,         /* GPIO_EMC_20 is configured as SEMC_ADDR04 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_21_SEMC_ADDR05,         /* GPIO_EMC_21 is configured as SEMC_ADDR05 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_22_SEMC_ADDR06,         /* GPIO_EMC_22 is configured as SEMC_ADDR06 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_23_SEMC_ADDR07,         /* GPIO_EMC_23 is configured as SEMC_ADDR07 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_24_SEMC_ADDR08,         /* GPIO_EMC_24 is configured as SEMC_ADDR08 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_25_SEMC_ADDR09,         /* GPIO_EMC_25 is configured as SEMC_ADDR09 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_26_SEMC_ADDR11,         /* GPIO_EMC_26 is configured as SEMC_ADDR11 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_27_SEMC_ADDR12,         /* GPIO_EMC_27 is configured as SEMC_ADDR12 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_28_SEMC_DQS,            /* GPIO_EMC_28 is configured as SEMC_DQS */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_29_SEMC_CKE,            /* GPIO_EMC_29 is configured as SEMC_CKE */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_30_SEMC_CLK,            /* GPIO_EMC_30 is configured as SEMC_CLK */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_31_SEMC_DM01,           /* GPIO_EMC_31 is configured as SEMC_DM01 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_32_SEMC_DATA08,         /* GPIO_EMC_32 is configured as SEMC_DATA08 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_33_SEMC_DATA09,         /* GPIO_EMC_33 is configured as SEMC_DATA09 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_34_SEMC_DATA10,         /* GPIO_EMC_34 is configured as SEMC_DATA10 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_35_SEMC_DATA11,         /* GPIO_EMC_35 is configured as SEMC_DATA11 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_36_SEMC_DATA12,         /* GPIO_EMC_36 is configured as SEMC_DATA12 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_37_SEMC_DATA13,         /* GPIO_EMC_37 is configured as SEMC_DATA13 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_38_SEMC_DATA14,         /* GPIO_EMC_38 is configured as SEMC_DATA14 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_39_SEMC_DATA15,         /* GPIO_EMC_39 is configured as SEMC_DATA15 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCANPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '32', peripheral: CAN1, signal: RX, pin_signal: GPIO_SD_B1_01}
+  - {pin_num: '33', peripheral: CAN1, signal: TX, pin_signal: GPIO_SD_B1_00}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCANPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCANPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_00_FLEXCAN1_TX,       /* GPIO_SD_B1_00 is configured as FLEXCAN1_TX */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_01_FLEXCAN1_RX,       /* GPIO_SD_B1_01 is configured as FLEXCAN1_RX */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitENETPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '97', peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_AD_B0_11}
+  - {pin_num: '84', peripheral: GPIO1, signal: 'gpio_io, 22', pin_signal: GPIO_AD_B1_06}
+  - {pin_num: '107', peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
+  - {pin_num: '100', peripheral: ENET, signal: enet_tx_clk, pin_signal: GPIO_AD_B0_08}
+  - {pin_num: '95', peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_AD_B0_13}
+  - {pin_num: '93', peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_AD_B0_15}
+  - {pin_num: '94', peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_AD_B0_14}
+  - {pin_num: '96', peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_AD_B0_12}
+  - {pin_num: '99', peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_AD_B0_09}
+  - {pin_num: '98', peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_AD_B0_10}
+  - {pin_num: '116', peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_40}
+  - {pin_num: '115', peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_41}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitENETPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitENETPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_04_GPIO1_IO04,        /* GPIO_AD_B0_04 is configured as GPIO1_IO04 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_08_ENET_TX_CLK,       /* GPIO_AD_B0_08 is configured as ENET_TX_CLK */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_09_ENET_RDATA01,      /* GPIO_AD_B0_09 is configured as ENET_RDATA01 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_10_ENET_RDATA00,      /* GPIO_AD_B0_10 is configured as ENET_RDATA00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_11_ENET_RX_EN,        /* GPIO_AD_B0_11 is configured as ENET_RX_EN */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_12_ENET_RX_ER,        /* GPIO_AD_B0_12 is configured as ENET_RX_ER */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_13_ENET_TX_EN,        /* GPIO_AD_B0_13 is configured as ENET_TX_EN */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_14_ENET_TDATA00,      /* GPIO_AD_B0_14 is configured as ENET_TDATA00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B0_15_ENET_TDATA01,      /* GPIO_AD_B0_15 is configured as ENET_TDATA01 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_B1_06_GPIO1_IO22,        /* GPIO_AD_B1_06 is configured as GPIO1_IO22 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_40_ENET_MDIO,           /* GPIO_EMC_40 is configured as ENET_MDIO */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_EMC_41_ENET_MDC,            /* GPIO_EMC_41 is configured as ENET_MDC */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitUSDHCPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '45', peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_03}
+  - {pin_num: '46', peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_02}
+  - {pin_num: '43', peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_04}
+  - {pin_num: '42', peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_05}
+  - {pin_num: '48', peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_00}
+  - {pin_num: '47', peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_01}
+  - {pin_num: '41', peripheral: GPIO3, signal: 'gpio_io, 19', pin_signal: GPIO_SD_B0_06}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitUSDHCPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitUSDHCPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2,      /* GPIO_SD_B0_00 is configured as USDHC1_DATA2 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3,      /* GPIO_SD_B0_01 is configured as USDHC1_DATA3 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B0_02_USDHC1_CMD,        /* GPIO_SD_B0_02 is configured as USDHC1_CMD */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B0_03_USDHC1_CLK,        /* GPIO_SD_B0_03 is configured as USDHC1_CLK */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0,      /* GPIO_SD_B0_04 is configured as USDHC1_DATA0 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1,      /* GPIO_SD_B0_05 is configured as USDHC1_DATA1 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B0_06_GPIO3_IO19,        /* GPIO_SD_B0_06 is configured as GPIO3_IO19 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '24', peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: '23', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: '21', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: '22', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: '25', peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: '19', peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_11}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* iomuxc clock (iomuxc_clk_enable): 0x03U */
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_DATA03,  /* GPIO_SD_B1_06 is configured as FLEXSPI_A_DATA03 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK,    /* GPIO_SD_B1_07 is configured as FLEXSPI_A_SCLK */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00,  /* GPIO_SD_B1_08 is configured as FLEXSPI_A_DATA00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA02,  /* GPIO_SD_B1_09 is configured as FLEXSPI_A_DATA02 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA01,  /* GPIO_SD_B1_10 is configured as FLEXSPI_A_DATA01 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_SS0_B,   /* GPIO_SD_B1_11 is configured as FLEXSPI_A_SS0_B */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.h
new file mode 100644
index 000000000..73ca62533
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/pin_mux.h
@@ -0,0 +1,439 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/* Define the flexspi macro. Note that it can't be modified here */
+#define IOMUXC_GPIO_AD_B1_00_FLEXSPI_A_DATA03 0x401F80FCU, 0x1U, 0x401F8374U, 0x1U, 0x401F8270U
+#define IOMUXC_GPIO_AD_B1_01_FLEXSPI_A_SCLK 0x401F8100U, 0x1U, 0x401F8378U, 0x1U, 0x401F8274U
+#define IOMUXC_GPIO_AD_B1_02_FLEXSPI_A_DATA00 0x401F8104U, 0x1U, 0x401F8368U, 0x1U, 0x401F8278U
+#define IOMUXC_GPIO_AD_B1_03_FLEXSPI_A_DATA02 0x401F8108U, 0x1U, 0x401F8370U, 0x1U, 0x401F827CU
+#define IOMUXC_GPIO_AD_B1_04_FLEXSPI_A_DATA01 0x401F810CU, 0x1U, 0x401F836CU, 0x1U, 0x401F8280U
+#define IOMUXC_GPIO_AD_B1_05_FLEXSPI_A_SS0_B 0x401F8110U, 0x1U, 0, 0, 0x401F8284U
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/* WAKEUP (number 52), USER_BUTTON */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO5   /*!< GPIO device name: GPIO5 */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO5   /*!< PORT device name: GPIO5 */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        0U   /*!< GPIO5 pin index: 0 */
+
+/* GPIO_AD_B1_08 (number 82), UART_TX/USER_LED/J17[4] */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO1   /*!< GPIO device name: GPIO1 */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO1   /*!< PORT device name: GPIO1 */
+#define BOARD_INITPINS_USER_LED_PIN                                          24U   /*!< GPIO1 pin index: 24 */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_07 (number 101), UART1_RXD/J17[8] */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Device name: LPUART1 */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< LPUART1 signal: RX */
+
+/* GPIO_AD_B0_06 (number 105), UART1_TXD/J17[12] */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Device name: LPUART1 */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< LPUART1 signal: TX */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_EMC_16 (number 142), SEMC_A0/U14[23]/BOOT_MODE[0] */
+#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL                                   0U   /*!< SEMC ADDR channel: 00 */
+
+/* GPIO_EMC_17 (number 141), SEMC_A1/U14[24]/BOOT_MODE[1] */
+#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL                                   1U   /*!< SEMC ADDR channel: 01 */
+
+/* GPIO_EMC_18 (number 140), SEMC_A2/U14[25]/BT_CFG[0] */
+#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL                                   2U   /*!< SEMC ADDR channel: 02 */
+
+/* GPIO_EMC_19 (number 139), SEMC_A3/U14[26]/BT_CFG[1] */
+#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL                                   3U   /*!< SEMC ADDR channel: 03 */
+
+/* GPIO_EMC_20 (number 138), SEMC_A4/U14[29]/BT_CFG[2] */
+#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL                                   4U   /*!< SEMC ADDR channel: 04 */
+
+/* GPIO_EMC_22 (number 136), SEMC_A6/U14[31]/BT_CFG[4] */
+#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL                                   6U   /*!< SEMC ADDR channel: 06 */
+
+/* GPIO_EMC_21 (number 137), SEMC_A5/U14[30]/BT_CFG[3] */
+#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL                                   5U   /*!< SEMC ADDR channel: 05 */
+
+/* GPIO_EMC_23 (number 133), SEMC_A7/U14[32]/BT_CFG[5] */
+#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL                                   7U   /*!< SEMC ADDR channel: 07 */
+
+/* GPIO_EMC_24 (number 132), SEMC_A8/U14[33]/BT_CFG[6] */
+#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL                                   8U   /*!< SEMC ADDR channel: 08 */
+
+/* GPIO_EMC_25 (number 131), SEMC_A9/U14[34]/BT_CFG[7] */
+#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL                                  ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL                                   9U   /*!< SEMC ADDR channel: 09 */
+
+/* GPIO_EMC_15 (number 143), SEMC_A10/U14[22] */
+#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL                                 ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL                                 10U   /*!< SEMC ADDR channel: 10 */
+
+/* GPIO_EMC_26 (number 130), SEMC_A11/U14[35]/BT_CFG[8] */
+#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL                                 ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL                                 11U   /*!< SEMC ADDR channel: 11 */
+
+/* GPIO_EMC_27 (number 129), SEMC_A12/U14[36]/BT_CFG[9] */
+#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL                                 ADDR   /*!< SEMC signal: ADDR */
+#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL                                 12U   /*!< SEMC ADDR channel: 12 */
+
+/* GPIO_EMC_13 (number 2), SEMC_BA0/U14[20] */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL                                   BA   /*!< SEMC signal: BA */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL                                  0U   /*!< SEMC BA channel: 0 */
+
+/* GPIO_EMC_14 (number 1), SEMC_BA1/U14[21] */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL                                   BA   /*!< SEMC signal: BA */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL                                  1U   /*!< SEMC BA channel: 1 */
+
+/* GPIO_EMC_10 (number 7), SEMC_CAS/U14[17] */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL                             semc_cas   /*!< SEMC signal: semc_cas */
+
+/* GPIO_EMC_29 (number 127), SEMC_CKE/U14[37] */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL                             semc_cke   /*!< SEMC signal: semc_cke */
+
+/* GPIO_EMC_30 (number 126), SEMC_CLK/U14[38] */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL                             semc_clk   /*!< SEMC signal: semc_clk */
+
+/* GPIO_EMC_12 (number 3), SEMC_CS0/U14[19] */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL                                   CS   /*!< SEMC signal: CS */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL                                  0U   /*!< SEMC CS channel: 0 */
+
+/* GPIO_EMC_09 (number 8), SEMC_WE/U14[16] */
+#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL                               semc_we   /*!< SEMC signal: semc_we */
+
+/* GPIO_EMC_11 (number 4), SEMC_RAS/U14[18] */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL                             semc_ras   /*!< SEMC signal: semc_ras */
+
+/* GPIO_EMC_28 (number 128), SAI3_MCLK */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL                             semc_dqs   /*!< SEMC signal: semc_dqs */
+
+/* GPIO_EMC_31 (number 125), SEMC_DM1/U14[39] */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL                                   DM   /*!< SEMC signal: DM */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL                                  1U   /*!< SEMC DM channel: 1 */
+
+/* GPIO_EMC_08 (number 9), SEMC_DM0/U14[15] */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL                                   DM   /*!< SEMC signal: DM */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL                                  0U   /*!< SEMC DM channel: 0 */
+
+/* GPIO_EMC_39 (number 117), SEMC_D15/U14[53] */
+#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL                                 DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL                                 15U   /*!< SEMC DATA channel: 15 */
+
+/* GPIO_EMC_38 (number 118), SEMC_D14/U14[51] */
+#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL                                 DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL                                 14U   /*!< SEMC DATA channel: 14 */
+
+/* GPIO_EMC_37 (number 119), SEMC_D13/U14[50] */
+#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL                                 DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL                                 13U   /*!< SEMC DATA channel: 13 */
+
+/* GPIO_EMC_36 (number 120), SEMC_D12/U14[48] */
+#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL                                 DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL                                 12U   /*!< SEMC DATA channel: 12 */
+
+/* GPIO_EMC_34 (number 122), SEMC_D10/U14[45] */
+#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL                                 DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL                                 10U   /*!< SEMC DATA channel: 10 */
+
+/* GPIO_EMC_35 (number 121), SEMC_D11/U14[47] */
+#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL                             SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL                                 DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL                                 11U   /*!< SEMC DATA channel: 11 */
+
+/* GPIO_EMC_33 (number 123), SEMC_D9/U14[44] */
+#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL                                   9U   /*!< SEMC DATA channel: 09 */
+
+/* GPIO_EMC_32 (number 124), SEMC_D8/U14[42] */
+#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL                                   8U   /*!< SEMC DATA channel: 08 */
+
+/* GPIO_EMC_07 (number 10), SEMC_D7/U14[13] */
+#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL                                   7U   /*!< SEMC DATA channel: 07 */
+
+/* GPIO_EMC_06 (number 12), SEMC_D6/U14[11] */
+#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL                                   6U   /*!< SEMC DATA channel: 06 */
+
+/* GPIO_EMC_05 (number 13), SEMC_D5/U14[10] */
+#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL                                   5U   /*!< SEMC DATA channel: 05 */
+
+/* GPIO_EMC_04 (number 14), SEMC_D4/U14[8] */
+#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL                                   4U   /*!< SEMC DATA channel: 04 */
+
+/* GPIO_EMC_03 (number 15), SEMC_D3/U14[7] */
+#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL                                   3U   /*!< SEMC DATA channel: 03 */
+
+/* GPIO_EMC_02 (number 16), SEMC_D2/U14[5] */
+#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL                                   2U   /*!< SEMC DATA channel: 02 */
+
+/* GPIO_EMC_01 (number 17), SEMC_D1/U14[4] */
+#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL                                   1U   /*!< SEMC DATA channel: 01 */
+
+/* GPIO_EMC_00 (number 18), SEMC_D0/U14[2] */
+#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL                              SEMC   /*!< Device name: SEMC */
+#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL                                  DATA   /*!< SEMC signal: DATA */
+#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL                                   0U   /*!< SEMC DATA channel: 00 */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitSDRAMPins(void);
+
+/* GPIO_SD_B1_01 (number 32), CAN1_RX/U9[4] */
+#define BOARD_INITCANPINS_CAN1_RX_PERIPHERAL                                CAN1   /*!< Device name: CAN1 */
+#define BOARD_INITCANPINS_CAN1_RX_SIGNAL                                      RX   /*!< CAN1 signal: RX */
+
+/* GPIO_SD_B1_00 (number 33), CAN1_TX/U9[1] */
+#define BOARD_INITCANPINS_CAN1_TX_PERIPHERAL                                CAN1   /*!< Device name: CAN1 */
+#define BOARD_INITCANPINS_CAN1_TX_SIGNAL                                      TX   /*!< CAN1 signal: TX */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCANPins(void);
+
+/* GPIO_AD_B0_11 (number 97), ENET_CRS_DV/U11[18]/J19[6] */
+#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL                           ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL                         enet_rx_en   /*!< ENET signal: enet_rx_en */
+
+/* GPIO_AD_B1_06 (number 84), ENET_INT/U11[21]/J17[16] */
+#define BOARD_INITENETPINS_ENET_INT_GPIO                                   GPIO1   /*!< GPIO device name: GPIO1 */
+#define BOARD_INITENETPINS_ENET_INT_PORT                                   GPIO1   /*!< PORT device name: GPIO1 */
+#define BOARD_INITENETPINS_ENET_INT_PIN                                      22U   /*!< GPIO1 pin index: 22 */
+
+/* GPIO_AD_B0_04 (number 107), JTAG_TDO/ENET_RST/U11[32] */
+#define BOARD_INITENETPINS_ENET_RST_GPIO                                   GPIO1   /*!< GPIO device name: GPIO1 */
+#define BOARD_INITENETPINS_ENET_RST_PORT                                   GPIO1   /*!< PORT device name: GPIO1 */
+#define BOARD_INITENETPINS_ENET_RST_PIN                                       4U   /*!< GPIO1 pin index: 4 */
+
+/* GPIO_AD_B0_08 (number 100), ENET_TX_REF_CLK/U11[9] */
+#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL                           ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL                        enet_tx_clk   /*!< ENET signal: enet_tx_clk */
+
+/* GPIO_AD_B0_13 (number 95), ENET_TXEN/U11[23]/J19[10] */
+#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL                             ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL                           enet_tx_en   /*!< ENET signal: enet_tx_en */
+
+/* GPIO_AD_B0_15 (number 93), ENET_TXD1/U11[25]/J19[4] */
+#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL                             ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL                         enet_tx_data   /*!< ENET signal: enet_tx_data */
+#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL                                  1U   /*!< ENET enet_tx_data channel: 1 */
+
+/* GPIO_AD_B0_14 (number 94), ENET_TXD0/U11[24]/J17[14] */
+#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL                             ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL                         enet_tx_data   /*!< ENET signal: enet_tx_data */
+#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL                                  0U   /*!< ENET enet_tx_data channel: 0 */
+
+/* GPIO_AD_B0_12 (number 96), ENET_RXER/U11[20]/J19[8] */
+#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL                             ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_RXER_SIGNAL                           enet_rx_er   /*!< ENET signal: enet_rx_er */
+
+/* GPIO_AD_B0_09 (number 99), ENET_RXD1/U11[15]/J17[6] */
+#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL                             ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL                         enet_rx_data   /*!< ENET signal: enet_rx_data */
+#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL                                  1U   /*!< ENET enet_rx_data channel: 1 */
+
+/* GPIO_AD_B0_10 (number 98), ENET_RXD0/U11[16]/J19[12] */
+#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL                             ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL                         enet_rx_data   /*!< ENET signal: enet_rx_data */
+#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL                                  0U   /*!< ENET enet_rx_data channel: 0 */
+
+/* GPIO_EMC_40 (number 116), ENET_MDIO/U11[11] */
+#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL                             ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL                            enet_mdio   /*!< ENET signal: enet_mdio */
+
+/* GPIO_EMC_41 (number 115), ENET_MDC/U11[12] */
+#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL                              ENET   /*!< Device name: ENET */
+#define BOARD_INITENETPINS_ENET_MDC_SIGNAL                              enet_mdc   /*!< ENET signal: enet_mdc */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitENETPins(void);
+
+/* GPIO_SD_B0_03 (number 45), SD1_CLK/J15[5] */
+#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL                            USDHC1   /*!< Device name: USDHC1 */
+#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL                             usdhc_clk   /*!< USDHC1 signal: usdhc_clk */
+
+/* GPIO_SD_B0_02 (number 46), SD1_CMD/J15[3] */
+#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL                            USDHC1   /*!< Device name: USDHC1 */
+#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL                             usdhc_cmd   /*!< USDHC1 signal: usdhc_cmd */
+
+/* GPIO_SD_B0_04 (number 43), SD1_D0/J15[7] */
+#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL                             USDHC1   /*!< Device name: USDHC1 */
+#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL                             usdhc_data   /*!< USDHC1 signal: usdhc_data */
+#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL                                    0U   /*!< USDHC1 usdhc_data channel: 0 */
+
+/* GPIO_SD_B0_05 (number 42), SD1_D1/J15[8] */
+#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL                             USDHC1   /*!< Device name: USDHC1 */
+#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL                             usdhc_data   /*!< USDHC1 signal: usdhc_data */
+#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL                                    1U   /*!< USDHC1 usdhc_data channel: 1 */
+
+/* GPIO_SD_B0_00 (number 48), SD1_D2/J15[1] */
+#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL                             USDHC1   /*!< Device name: USDHC1 */
+#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL                             usdhc_data   /*!< USDHC1 signal: usdhc_data */
+#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL                                    2U   /*!< USDHC1 usdhc_data channel: 2 */
+
+/* GPIO_SD_B0_01 (number 47), SD1_D3/J15[2] */
+#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL                             USDHC1   /*!< Device name: USDHC1 */
+#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL                             usdhc_data   /*!< USDHC1 signal: usdhc_data */
+#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL                                    3U   /*!< USDHC1 usdhc_data channel: 3 */
+
+/* GPIO_SD_B0_06 (number 41), SD_CD_SW/J15[9] */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_GPIO                                  GPIO3   /*!< GPIO device name: GPIO3 */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_PORT                                  GPIO3   /*!< PORT device name: GPIO3 */
+#define BOARD_INITUSDHCPINS_SD_CD_SW_PIN                                     19U   /*!< GPIO3 pin index: 19 */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitUSDHCPins(void);
+
+/* GPIO_SD_B1_07 (number 24), SAI3_TX_SYNC */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< FLEXSPI signal: FLEXSPI_A_SCLK */
+
+/* GPIO_SD_B1_08 (number 23), SAI3_TXD */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< FLEXSPI signal: FLEXSPI_A_DATA0 */
+
+/* GPIO_SD_B1_10 (number 21), SD_PWREN */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< FLEXSPI signal: FLEXSPI_A_DATA1 */
+
+/* GPIO_SD_B1_09 (number 22), AUD_INT */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< FLEXSPI signal: FLEXSPI_A_DATA2 */
+
+/* GPIO_SD_B1_06 (number 25), SAI3_TX_BCLK */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< FLEXSPI signal: FLEXSPI_A_DATA3 */
+
+/* GPIO_SD_B1_11 (number 19), SAI3_RXD */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Device name: FLEXSPI */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< FLEXSPI signal: FLEXSPI_A_SS0_B */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/evkmimxrt1024_flexspi_nor_config.c b/hw/bsp/imxrt/boards/mimxrt1024_evk/evkmimxrt1024_flexspi_nor_config.c
new file mode 100644
index 000000000..43dc1e823
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/evkmimxrt1024_flexspi_nor_config.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "evkmimxrt1024_flexspi_nor_config.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.xip_board"
+#endif
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".boot_hdr.conf"), used))
+#elif defined(__ICCARM__)
+#pragma location = ".boot_hdr.conf"
+#endif
+
+const flexspi_nor_config_t qspiflash_config = {
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackInternally,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+            .sflashPadType    = kSerialFlash_4Pads,
+            .serialClkFreq    = kFlexSpiSerialClk_60MHz,
+            .sflashA1Size     = 4u * 1024u * 1024u,
+            .lookupTable =
+                {
+                    // Read LUTs
+                    FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18),
+                    FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
+                },
+        },
+    .pageSize           = 256u,
+    .sectorSize         = 4u * 1024u,
+    .blockSize          = 64u * 1024u,
+    .isUniformBlockSize = false,
+};
+#endif /* XIP_BOOT_HEADER_ENABLE */
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/evkmimxrt1024_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/evkmimxrt1024_flexspi_nor_config.h
new file mode 100644
index 000000000..5231dc034
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/evkmimxrt1024_flexspi_nor_config.h
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2020 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __EVKMIMXRT1024_FLEXSPI_NOR_CONFIG__
+#define __EVKMIMXRT1024_FLEXSPI_NOR_CONFIG__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_common.h"
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief XIP_BOARD driver version 2.0.1. */
+#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
+/*@}*/
+
+/* FLEXSPI memory config block related definitions */
+#define FLEXSPI_CFG_BLK_TAG     (0x42464346UL) // ascii "FCFB" Big Endian
+#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
+#define FLEXSPI_CFG_BLK_SIZE    (512)
+
+/* FLEXSPI Feature related definitions */
+#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
+
+/* Lookup table related definitions */
+#define CMD_INDEX_READ        0
+#define CMD_INDEX_READSTATUS  1
+#define CMD_INDEX_WRITEENABLE 2
+#define CMD_INDEX_WRITE       4
+
+#define CMD_LUT_SEQ_IDX_READ        0
+#define CMD_LUT_SEQ_IDX_READSTATUS  1
+#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
+#define CMD_LUT_SEQ_IDX_WRITE       9
+
+#define CMD_SDR        0x01
+#define CMD_DDR        0x21
+#define RADDR_SDR      0x02
+#define RADDR_DDR      0x22
+#define CADDR_SDR      0x03
+#define CADDR_DDR      0x23
+#define MODE1_SDR      0x04
+#define MODE1_DDR      0x24
+#define MODE2_SDR      0x05
+#define MODE2_DDR      0x25
+#define MODE4_SDR      0x06
+#define MODE4_DDR      0x26
+#define MODE8_SDR      0x07
+#define MODE8_DDR      0x27
+#define WRITE_SDR      0x08
+#define WRITE_DDR      0x28
+#define READ_SDR       0x09
+#define READ_DDR       0x29
+#define LEARN_SDR      0x0A
+#define LEARN_DDR      0x2A
+#define DATSZ_SDR      0x0B
+#define DATSZ_DDR      0x2B
+#define DUMMY_SDR      0x0C
+#define DUMMY_DDR      0x2C
+#define DUMMY_RWDS_SDR 0x0D
+#define DUMMY_RWDS_DDR 0x2D
+#define JMP_ON_CS      0x1F
+#define STOP           0
+
+#define FLEXSPI_1PAD 0
+#define FLEXSPI_2PAD 1
+#define FLEXSPI_4PAD 2
+#define FLEXSPI_8PAD 3
+
+#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)                                                              \
+    (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
+     FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
+
+//!@brief Definitions for FlexSPI Serial Clock Frequency
+typedef enum _FlexSpiSerialClockFreq
+{
+    kFlexSpiSerialClk_30MHz  = 1,
+    kFlexSpiSerialClk_50MHz  = 2,
+    kFlexSpiSerialClk_60MHz  = 3,
+    kFlexSpiSerialClk_75MHz  = 4,
+    kFlexSpiSerialClk_80MHz  = 5,
+    kFlexSpiSerialClk_100MHz = 6,
+    kFlexSpiSerialClk_133MHz = 7,
+} flexspi_serial_clk_freq_t;
+
+//!@brief FlexSPI clock configuration type
+enum
+{
+    kFlexSpiClk_SDR, //!< Clock configure for SDR mode
+    kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
+};
+
+//!@brief FlexSPI Read Sample Clock Source definition
+typedef enum _FlashReadSampleClkSource
+{
+    kFlexSPIReadSampleClk_LoopbackInternally      = 0,
+    kFlexSPIReadSampleClk_LoopbackFromDqsPad      = 1,
+    kFlexSPIReadSampleClk_LoopbackFromSckPad      = 2,
+    kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
+} flexspi_read_sample_clk_t;
+
+//!@brief Misc feature bit definitions
+enum
+{
+    kFlexSpiMiscOffset_DiffClkEnable            = 0, //!< Bit for Differential clock enable
+    kFlexSpiMiscOffset_Ck2Enable                = 1, //!< Bit for CK2 enable
+    kFlexSpiMiscOffset_ParallelEnable           = 2, //!< Bit for Parallel mode enable
+    kFlexSpiMiscOffset_WordAddressableEnable    = 3, //!< Bit for Word Addressable enable
+    kFlexSpiMiscOffset_SafeConfigFreqEnable     = 4, //!< Bit for Safe Configuration Frequency enable
+    kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
+    kFlexSpiMiscOffset_DdrModeEnable            = 6, //!< Bit for DDR clock confiuration indication.
+};
+
+//!@brief Flash Type Definition
+enum
+{
+    kFlexSpiDeviceType_SerialNOR    = 1,    //!< Flash devices are Serial NOR
+    kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
+    kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
+    kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+};
+
+//!@brief Flash Pad Definitions
+enum
+{
+    kSerialFlash_1Pad  = 1,
+    kSerialFlash_2Pads = 2,
+    kSerialFlash_4Pads = 4,
+    kSerialFlash_8Pads = 8,
+};
+
+//!@brief FlexSPI LUT Sequence structure
+typedef struct _lut_sequence
+{
+    uint8_t seqNum; //!< Sequence Number, valid number: 1-16
+    uint8_t seqId;  //!< Sequence Index, valid number: 0-15
+    uint16_t reserved;
+} flexspi_lut_seq_t;
+
+//!@brief Flash Configuration Command Type
+enum
+{
+    kDeviceConfigCmdType_Generic,    //!< Generic command, for example: configure dummy cycles, drive strength, etc
+    kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
+    kDeviceConfigCmdType_Spi2Xpi,    //!< Switch from SPI to DPI/QPI/OPI mode
+    kDeviceConfigCmdType_Xpi2Spi,    //!< Switch from DPI/QPI/OPI to SPI mode
+    kDeviceConfigCmdType_Spi2NoCmd,  //!< Switch to 0-4-4/0-8-8 mode
+    kDeviceConfigCmdType_Reset,      //!< Reset device command
+};
+
+//!@brief FlexSPI Memory Configuration Block
+typedef struct _FlexSPIConfig
+{
+    uint32_t tag;               //!< [0x000-0x003] Tag, fixed value 0x42464346UL
+    uint32_t version;           //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
+    uint32_t reserved0;         //!< [0x008-0x00b] Reserved for future use
+    uint8_t readSampleClkSrc;   //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
+    uint8_t csHoldTime;         //!< [0x00d-0x00d] CS hold time, default value: 3
+    uint8_t csSetupTime;        //!< [0x00e-0x00e] CS setup time, default value: 3
+    uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
+    //! Serial NAND, need to refer to datasheet
+    uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
+    uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
+    //! Generic configuration, etc.
+    uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
+    //! DPI/QPI/OPI switch or reset command
+    flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
+    //! sequence number, [31:16] Reserved
+    uint32_t deviceModeArg;    //!< [0x018-0x01b] Argument/Parameter for device configuration
+    uint8_t configCmdEnable;   //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
+    uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
+    flexspi_lut_seq_t
+        configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
+    uint32_t reserved1;   //!< [0x02c-0x02f] Reserved for future use
+    uint32_t configCmdArgs[3];     //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
+    uint32_t reserved2;            //!< [0x03c-0x03f] Reserved for future use
+    uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
+    //! details
+    uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
+    uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
+    //! Chapter for more details
+    uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
+    //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
+    uint32_t reserved3[2];           //!< [0x048-0x04f] Reserved for future use
+    uint32_t sflashA1Size;           //!< [0x050-0x053] Size of Flash connected to A1
+    uint32_t sflashA2Size;           //!< [0x054-0x057] Size of Flash connected to A2
+    uint32_t sflashB1Size;           //!< [0x058-0x05b] Size of Flash connected to B1
+    uint32_t sflashB2Size;           //!< [0x05c-0x05f] Size of Flash connected to B2
+    uint32_t csPadSettingOverride;   //!< [0x060-0x063] CS pad setting override value
+    uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
+    uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
+    uint32_t dqsPadSettingOverride;  //!< [0x06c-0x06f] DQS pad setting override value
+    uint32_t timeoutInMs;            //!< [0x070-0x073] Timeout threshold for read status command
+    uint32_t commandInterval;        //!< [0x074-0x077] CS deselect interval between two commands
+    uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
+    uint16_t busyOffset;       //!< [0x07c-0x07d] Busy offset, valid value: 0-31
+    uint16_t busyBitPolarity;  //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
+    //! busy flag is 0 when flash device is busy
+    uint32_t lookupTable[64];           //!< [0x080-0x17f] Lookup table holds Flash command sequences
+    flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
+    uint32_t reserved4[4];              //!< [0x1b0-0x1bf] Reserved for future use
+} flexspi_mem_config_t;
+
+/*  */
+#define NOR_CMD_INDEX_READ        CMD_INDEX_READ        //!< 0
+#define NOR_CMD_INDEX_READSTATUS  CMD_INDEX_READSTATUS  //!< 1
+#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
+#define NOR_CMD_INDEX_ERASESECTOR 3                     //!< 3
+#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE       //!< 4
+#define NOR_CMD_INDEX_CHIPERASE   5                     //!< 5
+#define NOR_CMD_INDEX_DUMMY       6                     //!< 6
+#define NOR_CMD_INDEX_ERASEBLOCK  7                     //!< 7
+
+#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0  READ LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
+    CMD_LUT_SEQ_IDX_READSTATUS //!< 1  Read Status LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
+    2 //!< 2  Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
+    CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3  Write Enable sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
+    4 //!< 4  Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5  Erase Sector sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK  8 //!< 8 Erase Block sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
+    CMD_LUT_SEQ_IDX_WRITE                //!< 9  Program sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
+    14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
+    15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
+
+/*
+ *  Serial NOR configuration block
+ */
+typedef struct _flexspi_nor_config
+{
+    flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
+    uint32_t pageSize;              //!< Page size of Serial NOR
+    uint32_t sectorSize;            //!< Sector size of Serial NOR
+    uint8_t ipcmdSerialClkFreq;     //!< Clock frequency for IP command
+    uint8_t isUniformBlockSize;     //!< Sector/Block size is the same
+    uint8_t reserved0[2];           //!< Reserved for future use
+    uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
+    uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
+    uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
+    uint32_t blockSize;             //!< Block size
+    uint32_t reserve2[11];          //!< Reserved for future use
+} flexspi_nor_config_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __EVKMIMXRT1024_FLEXSPI_NOR_CONFIG__ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex
new file mode 100644
index 000000000..7c44950ec
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex
@@ -0,0 +1,527 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1024-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="a558cc6e-82c2-41f9-9f55-0348efc7896f" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1024xxxxx</processor>
+      <package>MIMXRT1024DAG5A</package>
+      <board>MIMXRT1024-EVK</board>
+      <board_revision>B1</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="52" pin_signal="WAKEUP" label="USER_BUTTON" identifier="USER_BUTTON"/>
+               <pin_label pin_num="82" pin_signal="GPIO_AD_B1_08" label="UART_TX/USER_LED/J17[4]" identifier="USER_LED"/>
+            </pin_labels>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO5" description="Peripheral GPIO5 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO5" signal="gpio_io, 00" pin_num="52" pin_signal="WAKEUP">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 24" pin_num="82" pin_signal="GPIO_AD_B1_08">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="101" pin_signal="GPIO_AD_B0_07"/>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="105" pin_signal="GPIO_AD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="142" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="141" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="140" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="139" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="138" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="136" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="137" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="133" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="132" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="131" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="143" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="130" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="129" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="2" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="1" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="7" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="127" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="126" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="3" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="8" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="4" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="128" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="125" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="9" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="117" pin_signal="GPIO_EMC_39"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="118" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="119" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="120" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="122" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="121" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="123" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="124" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="10" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="12" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="13" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="14" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="15" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="16" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="17" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="18" pin_signal="GPIO_EMC_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN1" description="Peripheral CAN1 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN1" signal="RX" pin_num="32" pin_signal="GPIO_SD_B1_01"/>
+                  <pin peripheral="CAN1" signal="TX" pin_num="33" pin_signal="GPIO_SD_B1_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="97" pin_signal="GPIO_AD_B0_11"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 22" pin_num="84" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="107" pin_signal="GPIO_AD_B0_04"/>
+                  <pin peripheral="ENET" signal="enet_tx_clk" pin_num="100" pin_signal="GPIO_AD_B0_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="95" pin_signal="GPIO_AD_B0_13"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="93" pin_signal="GPIO_AD_B0_15"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="94" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="96" pin_signal="GPIO_AD_B0_12"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="99" pin_signal="GPIO_AD_B0_09"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="98" pin_signal="GPIO_AD_B0_10"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="116" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="115" pin_signal="GPIO_EMC_41"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="45" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="46" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="43" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="42" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="48" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="47" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="GPIO3" signal="gpio_io, 19" pin_num="41" pin_signal="GPIO_SD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="24" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="23" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="21" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="22" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="25" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="19" pin_signal="GPIO_SD_B1_11"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL2_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM.ARM_PODF" locked="false"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.USDHC1_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM.USDHC2_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENABLE_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>13.0.2</processor_version>
+            <output_format>c_array</output_format>
+         </dcdx_profile>
+         <dcdx_configurations>
+            <dcdx_configuration name="Device_configuration">
+               <description></description>
+               <options/>
+               <command_groups/>
+            </dcdx_configuration>
+         </dcdx_configurations>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="6d394465-bc9b-47f2-9a1f-3ca61f76d27b" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="NVIC" uuid="096e7e36-6917-481a-a4c5-06822cfc2da4" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="5dc935cc-5865-4d50-bac9-89ad440a12ee" type_id="system_54b53072540eeeb8f8e9343e71f28176">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="c2fe99b8-bf9b-437f-9446-a35000b06679" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="generic_uart" uuid="eca93ea1-cadf-4247-bfdc-08769ef8ed12" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="fdf82c69-a73f-4f32-9699-457260453bc6" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="af80d7a8-d163-4a6f-839d-0ce2b15abffd" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="dca6ee55-a78d-4884-99bd-4f821b552213" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="4c34638b-b184-4e9d-8a81-5f3a1287180a" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>N/A</processor_version>
+         </tee_profile>
+      </tee>
+      <common name="common" version="1.0" enabled="true" update_project_code="true">
+         <core name="core0" role="primary" project_name="Project"/>
+      </common>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.cmake b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.cmake
new file mode 100644
index 000000000..1aee75b0d
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.cmake
@@ -0,0 +1,16 @@
+set(MCU_VARIANT MIMXRT1052)
+
+set(JLINK_DEVICE MIMXRT1052xxxxB)
+set(PYOCD_TARGET mimxrt1050)
+set(NXPLINK_DEVICE MIMXRT1052xxxxB:EVK-MIMXRT1050)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkbimxrt1050_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1052DVL6B
+    BOARD_TUD_RHPORT=0
+    BOARD_TUH_RHPORT=1
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h
index 0472f608c..97d1e446c 100644
--- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -24,28 +24,24 @@
  * This file is part of the TinyUSB stack.
  */
 
+#ifndef BOARD_MIMXRT1050_EVKB_H_
+#define BOARD_MIMXRT1050_EVKB_H_
 
-#ifndef BOARD_H_
-#define BOARD_H_
-
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (0x4000000U)
 
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
-#define LED_PORT              GPIO1
-#define LED_PIN               9
+// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
-// SW8 button
-#define BUTTON_PINMUX         IOMUXC_SNVS_WAKEUP_GPIO5_IO00
-#define BUTTON_PORT           GPIO5
-#define BUTTON_PIN            0
+// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
 #define BUTTON_STATE_ACTIVE   0
 
-// UART
+// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
 #define UART_PORT             LPUART1
-#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
-#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 
-#endif /* BOARD_H_ */
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk
index 9fd229105..60aa1e28f 100644
--- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk
@@ -1,6 +1,8 @@
 CFLAGS += -DCPU_MIMXRT1052DVL6B
 MCU_VARIANT = MIMXRT1052
 
+JLINK_DEVICE = MIMXRT1052xxxxB
+
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1050
 
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c
new file mode 100644
index 000000000..9738c6350
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c
@@ -0,0 +1,495 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1052xxxxB
+package_id: MIMXRT1052DVL6B
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: IMXRT1050-EVKB
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 160 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '3', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM.PLL3_SW_CLK_SEL}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '40'}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2'}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4'}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 40,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 2);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 1);
+#endif
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(40);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK)
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK;
+#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK)
+    /* Backward compatibility for original bitfield name */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+#else
+#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined."
+#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h
new file mode 100644
index 000000000..6b4264bf2
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h
@@ -0,0 +1,119 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           160000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.c
new file mode 100644
index 000000000..aebfa5f46
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.c
@@ -0,0 +1,618 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1052xxxxB
+package_id: MIMXRT1052DVL6B
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: IMXRT1050-EVKB
+pin_labels:
+- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED}
+- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper}
+  - {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+  CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
+
+  /* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */
+  GPIO_PinInit(GPIO1, 9U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on WAKEUP (pin L6) */
+  GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U);
+  IOMUXC_SetPinConfig(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0x01B0A0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitDEBUG_UARTPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, 0x10B0U);
+#else
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, 0x10B0U);
+#else
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
+#endif
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitSDRAMPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09}
+  - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10}
+  - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11}
+  - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12}
+  - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13}
+  - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14}
+  - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15}
+  - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16}
+  - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17}
+  - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18}
+  - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23}
+  - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19}
+  - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20}
+  - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21}
+  - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22}
+  - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24}
+  - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27}
+  - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26}
+  - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
+  - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
+  - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
+  - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
+  - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
+  - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
+  - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
+  - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
+  - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30}
+  - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31}
+  - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32}
+  - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33}
+  - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34}
+  - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35}
+  - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36}
+  - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37}
+  - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
+  - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38}
+  - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25}
+  - {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28}
+  - {pin_num: C7, peripheral: SEMC, signal: 'CSX, 0', pin_signal: GPIO_EMC_41}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitSDRAMPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitSDRAMPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DA00, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DA01, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DA02, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DA03, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DA04, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DA05, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DA06, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DA07, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U);
+#endif
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DA08, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DA09, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DA10, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DA11, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DA12, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DA13, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DA14, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DA15, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U);
+#endif
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_SEMC_CSX0, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_SEMC_CSX00, 0U);
+#endif
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCSIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08}
+  - {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09}
+  - {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10}
+  - {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11}
+  - {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12}
+  - {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13}
+  - {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15}
+  - {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14}
+  - {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04}
+  - {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05}
+  - {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06}
+  - {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07}
+  - {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCSIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCSIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitLCDPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitLCDPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitLCDPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCANPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14}
+  - {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCANPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCANPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitENETPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40}
+  - {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41}
+  - {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10}
+  - {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04}
+  - {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05}
+  - {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06}
+  - {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11}
+  - {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07}
+  - {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08}
+  - {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitENETPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitENETPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitUSDHCPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
+  - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
+  - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
+  - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
+  - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
+  - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitUSDHCPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitUSDHCPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitHyperFlashPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: L5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA3, pin_signal: GPIO_SD_B1_00}
+  - {pin_num: M5, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA2, pin_signal: GPIO_SD_B1_01}
+  - {pin_num: M3, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA1, pin_signal: GPIO_SD_B1_02}
+  - {pin_num: M4, peripheral: FLEXSPI, signal: FLEXSPI_B_DATA0, pin_signal: GPIO_SD_B1_03}
+  - {pin_num: P2, peripheral: FLEXSPI, signal: FLEXSPI_B_SCLK, pin_signal: GPIO_SD_B1_04}
+  - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
+  - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitHyperFlashPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitHyperFlashPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_00_FLEXSPIB_DATA03, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_01_FLEXSPIB_DATA02, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_02_FLEXSPIB_DATA01, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_03_FLEXSPIB_DATA00, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_04_FLEXSPIB_SCLK, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA00, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
+#endif
+#if FSL_IOMUXC_DRIVER_VERSION >= MAKE_VERSION(2, 0, 3)
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3, 0U);
+#else
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
+#endif
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.h
new file mode 100644
index 000000000..3d3a7a93c
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/pin_mux.h
@@ -0,0 +1,761 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       9U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                      9U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                         (1U << 9U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                           9U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                              (1U << 9U)   /*!< PORT pin mask */
+
+/* WAKEUP (coord L6), SD_PWREN */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO5   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    0U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO5   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   0U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 0U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO5   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        0U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 0U)   /*!< PORT pin mask */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< Signal name */
+
+/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_EMC_09 (coord C2), SEMC_A0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_EMC_10 (coord G1), SEMC_A1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_11 (coord G3), SEMC_A2 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_12 (coord H1), SEMC_A3 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_13 (coord A6), SEMC_A4 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_14 (coord B6), SEMC_A5 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_15 (coord B1), SEMC_A6 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_16 (coord A5), SEMC_A7 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_17 (coord A4), SEMC_A8 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_18 (coord B2), SEMC_A9 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_23 (coord G2), SEMC_A10 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_19 (coord B4), SEMC_A11 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_20 (coord A3), SEMC_A12 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_21 (coord C1), SEMC_BA0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_22 (coord F1), SEMC_BA1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_24 (coord D3), SEMC_CAS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL                             semc_cas   /*!< Signal name */
+
+/* GPIO_EMC_27 (coord A2), SEMC_CKE */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL                             semc_cke   /*!< Signal name */
+
+/* GPIO_EMC_26 (coord B3), SEMC_CLK */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL                             semc_clk   /*!< Signal name */
+
+/* GPIO_EMC_00 (coord E3), SEMC_D0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_EMC_01 (coord F3), SEMC_D1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_02 (coord F4), SEMC_D2 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_03 (coord G4), SEMC_D3 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_04 (coord F2), SEMC_D4 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_05 (coord G5), SEMC_D5 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_06 (coord H5), SEMC_D6 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_07 (coord H4), SEMC_D7 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_30 (coord C6), SEMC_D8 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_31 (coord C5), SEMC_D9 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_32 (coord D5), SEMC_D10 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_33 (coord C4), SEMC_D11 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_34 (coord D4), SEMC_D12 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_35 (coord E5), SEMC_D13 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL                                 13U   /*!< Signal channel */
+
+/* GPIO_EMC_36 (coord C3), SEMC_D14 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL                                 14U   /*!< Signal channel */
+
+/* GPIO_EMC_37 (coord E4), SEMC_D15 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL                                 15U   /*!< Signal channel */
+
+/* GPIO_EMC_08 (coord H3), SEMC_DM0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_38 (coord D6), SEMC_DM1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_25 (coord D2), SEMC_RAS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL                             semc_ras   /*!< Signal name */
+
+/* GPIO_EMC_28 (coord D1), SEMC_WE */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL                               semc_we   /*!< Signal name */
+
+/* GPIO_EMC_41 (coord C7), ENET_MDIO */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_ENET_MDIO_PERIPHERAL                            SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_ENET_MDIO_SIGNAL                                 CSX   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_ENET_MDIO_CHANNEL                                 0U   /*!< Signal channel */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitSDRAMPins(void);
+
+/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D9_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D9_CHANNEL                                      9U   /*!< Signal channel */
+
+/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D8_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D8_CHANNEL                                      8U   /*!< Signal channel */
+
+/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D7_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D7_CHANNEL                                      7U   /*!< Signal channel */
+
+/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D6_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D6_CHANNEL                                      6U   /*!< Signal channel */
+
+/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D5_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D5_CHANNEL                                      5U   /*!< Signal channel */
+
+/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D4_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D4_CHANNEL                                      4U   /*!< Signal channel */
+
+/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D2_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D2_CHANNEL                                      2U   /*!< Signal channel */
+
+/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D3_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D3_CHANNEL                                      3U   /*!< Signal channel */
+
+/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL                              CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL                           csi_pixclk   /*!< Signal name */
+
+/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL                                CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL                               csi_mclk   /*!< Signal name */
+
+/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL                               CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL                             csi_vsync   /*!< Signal name */
+
+/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL                               CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL                             csi_hsync   /*!< Signal name */
+
+/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL                          LPI2C1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL                                 SCL   /*!< Signal name */
+
+/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL                          LPI2C1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL                                 SDA   /*!< Signal name */
+
+/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL                              GPIO1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL                                    4U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO                                    GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN                                   4U   /*!< GPIO pin number */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK                      (1U << 4U)   /*!< GPIO pin mask */
+#define BOARD_INITCSIPINS_CSI_PWDN_PORT                                    GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITCSIPINS_CSI_PWDN_PIN                                        4U   /*!< PORT pin number */
+#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK                           (1U << 4U)   /*!< PORT pin mask */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCSIPins(void);
+
+/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_B0_00 (coord D7), LCDIF_CLK */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL                             lcdif_clk   /*!< Signal name */
+
+/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL                                    4U   /*!< Signal channel */
+
+/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL                                    5U   /*!< Signal channel */
+
+/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL                                    6U   /*!< Signal channel */
+
+/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL                                    7U   /*!< Signal channel */
+
+/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL                                    8U   /*!< Signal channel */
+
+/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL                                    9U   /*!< Signal channel */
+
+/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL                                  10U   /*!< Signal channel */
+
+/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL                                  11U   /*!< Signal channel */
+
+/* GPIO_B1_00 (coord A11), LCDIF_D12 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL                                  12U   /*!< Signal channel */
+
+/* GPIO_B1_01 (coord B11), LCDIF_D13 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL                                  13U   /*!< Signal channel */
+
+/* GPIO_B1_02 (coord C11), LCDIF_D14 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL                                  14U   /*!< Signal channel */
+
+/* GPIO_B1_03 (coord D11), LCDIF_D15 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL                                  15U   /*!< Signal channel */
+
+/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL                          LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL                       lcdif_enable   /*!< Signal name */
+
+/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL                           LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL                         lcdif_hsync   /*!< Signal name */
+
+/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL                           LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL                         lcdif_vsync   /*!< Signal name */
+
+/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL                         GPIO2   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL                           gpio_io   /*!< Signal name */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL                              31U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO                               GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN                             31U   /*!< GPIO pin number */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK                (1U << 31U)   /*!< GPIO pin mask */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT                               GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN                                  31U   /*!< PORT pin number */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK                     (1U << 31U)   /*!< PORT pin mask */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitLCDPins(void);
+
+/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL                                CAN2   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN2_TX_SIGNAL                                      TX   /*!< Signal name */
+
+/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL                                CAN2   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN2_RX_SIGNAL                                      RX   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCANPins(void);
+
+/* GPIO_EMC_40 (coord A7), ENET_MDC */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL                              ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDC_SIGNAL                              enet_mdc   /*!< Signal name */
+
+/* GPIO_EMC_41 (coord C7), ENET_MDIO */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL                            enet_mdio   /*!< Signal name */
+
+/* GPIO_B1_10 (coord B13), ENET_TX_CLK */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL                       enet_ref_clk   /*!< Signal name */
+
+/* GPIO_B1_04 (coord E12), ENET_RXD0 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_B1_05 (coord D12), ENET_RXD1 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_B1_06 (coord C12), ENET_CRS_DV */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL                         enet_rx_en   /*!< Signal name */
+
+/* GPIO_B1_11 (coord C13), ENET_RXER */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXER_SIGNAL                           enet_rx_er   /*!< Signal name */
+
+/* GPIO_B1_07 (coord B12), ENET_TXD0 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_B1_08 (coord A12), ENET_TXD1 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_B1_09 (coord A13), ENET_TXEN */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL                           enet_tx_en   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitENETPins(void);
+
+/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL                             usdhc_cmd   /*!< Signal name */
+
+/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL                             usdhc_clk   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitUSDHCPins(void);
+
+/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_PERIPHERAL                  FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_SIGNAL               FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_A_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_A_SIGNAL             FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_A_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_A_SIGNAL             FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_A_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_A_SIGNAL             FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_00 (coord L5), FlexSPI_D3_B */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_B_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_B_SIGNAL             FLEXSPI_B_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_01 (coord M5), FlexSPI_D2_B */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_B_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D2_B_SIGNAL             FLEXSPI_B_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_02 (coord M3), FlexSPI_D1_B */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_B_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D1_B_SIGNAL             FLEXSPI_B_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_03 (coord M4), FlexSPI_D0_B */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_B_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D0_B_SIGNAL             FLEXSPI_B_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_04 (coord P2), FlexSPI_CLK_B */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_B_PERIPHERAL                FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_CLK_B_SIGNAL             FLEXSPI_B_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_SS0_PERIPHERAL                  FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_SS0_SIGNAL              FLEXSPI_A_SS0_B   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_A_PERIPHERAL                 FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_D3_A_SIGNAL             FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
+/* Routed pin properties */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_DQS_PERIPHERAL                  FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITHYPERFLASHPINS_FlexSPI_DQS_SIGNAL                FLEXSPI_A_DQS   /*!< Signal name */
+
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitHyperFlashPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h
index fe40e7ed7..7a14360e4 100644
--- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h
@@ -19,7 +19,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -27,7 +27,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -125,7 +125,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -186,7 +186,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -254,7 +254,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex
new file mode 100644
index 000000000..6bdfd46a1
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex
@@ -0,0 +1,1033 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="IMXRT1050-EVKB" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="789fd1d3-821c-40a6-b04d-44ccc5a5d158" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1052xxxxB</processor>
+      <package>MIMXRT1052DVL6B</package>
+      <board>IMXRT1050-EVKB</board>
+      <board_revision>A</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="F14" pin_signal="GPIO_AD_B0_09" label="JTAG_TDI/J21[5]/ENET_RST/J22[5]" identifier="USER_LED"/>
+               <pin_label pin_num="L6" pin_signal="WAKEUP" label="SD_PWREN" identifier="USER_BUTTON"/>
+            </pin_labels>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO5" description="Peripheral GPIO5 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO1" signal="gpio_io, 09" pin_num="F14" pin_signal="GPIO_AD_B0_09">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO5" signal="gpio_io, 00" pin_num="L6" pin_signal="WAKEUP">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CSX, 0" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitHyperFlashPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitHyperFlashPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitHyperFlashPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitHyperFlashPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA3" pin_num="L5" pin_signal="GPIO_SD_B1_00"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA2" pin_num="M5" pin_signal="GPIO_SD_B1_01"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA1" pin_num="M3" pin_signal="GPIO_SD_B1_02"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA0" pin_num="M4" pin_signal="GPIO_SD_B1_03"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_SCLK" pin_num="P2" pin_signal="GPIO_SD_B1_04"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="160 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM.PLL3_SW_CLK_SEL" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="40" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="a7525270-2da6-4556-8d91-4ab9d0edc0e2" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="cb1fcaec-81fe-4d3e-a079-a7d2819d6075" type="flexcan" type_id="flexcan_10d80efac19b25dcd240244aae88dca0" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="wakeupSrc" value="kFLEXCAN_WakeupSrcUnfiltered"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableTimerSync" value="true"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="da865a46-3511-4001-8bb0-5249c52b0e4d" type="csi" type_id="csi_b2cf1faba8074e676ac4be93ec552c5a" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="47051ef3-2c25-4648-8f79-4ae87cd12674" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="64741c26-6183-46d0-8bfe-02a92aa90e05" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="8bf370a5-e797-45e8-b8c4-629c84c62843" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="2"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="687e3f12-1330-4ff9-8138-6aaf372d3e22" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="17c5d0d5-726a-40f6-a434-b121e9798a55" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="4a40b9b1-b64b-41b7-8ba7-728cda5039cd" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="c8d21d99-3f5e-47f2-aba7-0588ad4c2132" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="dfa0bda9-5863-49b3-9482-3ee85a2b93f0" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="3358d4d0-14d8-4ca7-9c13-378a0dc7f9a2" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="65c68c04-c4f4-4fbc-8c15-452d53d79fe6" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="99f59d06-c3df-407a-856a-22072ef95a98" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+      <common name="common" version="1.0" enabled="true" update_project_code="true">
+         <core name="core0" role="primary" project_name="Project"/>
+      </common>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake
new file mode 100644
index 000000000..fd335cdf5
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.cmake
@@ -0,0 +1,16 @@
+set(MCU_VARIANT MIMXRT1062)
+
+set(JLINK_DEVICE MIMXRT1062xxx6A)
+set(PYOCD_TARGET mimxrt1060)
+set(NXPLINK_DEVICE MIMXRT1062xxxxA:EVK-MIMXRT1060)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1060_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1062DVL6A
+    BOARD_TUD_RHPORT=0
+    BOARD_TUH_RHPORT=1
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h
index 7fa37e33f..40b99860f 100644
--- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -24,28 +24,24 @@
  * This file is part of the TinyUSB stack.
  */
 
+#ifndef BOARD_MIMXRT1060_EVKB_H_
+#define BOARD_MIMXRT1060_EVKB_H_
 
-#ifndef BOARD_H_
-#define BOARD_H_
-
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (0x800000U)
 
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
-#define LED_PORT              GPIO1
-#define LED_PIN               9
+// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
-// SW8 button
-#define BUTTON_PINMUX         IOMUXC_SNVS_WAKEUP_GPIO5_IO00
-#define BUTTON_PORT           GPIO5
-#define BUTTON_PIN            0
+// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
 #define BUTTON_STATE_ACTIVE   0
 
-// UART
+// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX
 #define UART_PORT             LPUART1
-#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_13_LPUART1_RX
-#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_12_LPUART1_TX
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 
-#endif /* BOARD_H_ */
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk
index d21063c99..0317ee452 100644
--- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk
@@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1062xxx6A
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1060
 
-BOARD_TUD_RHPORT = 1
-BOARD_TUH_RHPORT = 0
+BOARD_TUD_RHPORT = 0
+BOARD_TUH_RHPORT = 1
 
 # flash using pyocd
 flash: flash-pyocd
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c
new file mode 100644
index 000000000..c55e0135a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c
@@ -0,0 +1,509 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c
new file mode 100644
index 000000000..5d679709e
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.c
@@ -0,0 +1,497 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+pin_labels:
+- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED}
+- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper}
+  - {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+  CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
+
+  /* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */
+  GPIO_PinInit(GPIO1, 9U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on WAKEUP (pin L6) */
+  GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitDEBUG_UARTPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitSDRAMPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09}
+  - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10}
+  - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11}
+  - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12}
+  - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13}
+  - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14}
+  - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15}
+  - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16}
+  - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17}
+  - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18}
+  - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23}
+  - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19}
+  - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20}
+  - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21}
+  - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22}
+  - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24}
+  - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27}
+  - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26}
+  - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
+  - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
+  - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
+  - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
+  - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
+  - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
+  - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
+  - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
+  - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30}
+  - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31}
+  - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32}
+  - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33}
+  - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34}
+  - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35}
+  - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36}
+  - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37}
+  - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
+  - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38}
+  - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25}
+  - {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28}
+  - {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29}
+  - {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitSDRAMPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitSDRAMPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCSIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08}
+  - {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09}
+  - {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10}
+  - {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11}
+  - {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12}
+  - {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13}
+  - {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15}
+  - {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14}
+  - {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04}
+  - {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05}
+  - {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06}
+  - {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07}
+  - {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCSIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCSIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitLCDPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow}
+  - {pin_num: M11, peripheral: GPIO1, signal: 'gpio_io, 02', pin_signal: GPIO_AD_B0_02}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitLCDPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitLCDPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
+    );
+  IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
+    (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCANPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14}
+  - {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCANPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCANPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitENETPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40}
+  - {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41}
+  - {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10}
+  - {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04}
+  - {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05}
+  - {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06}
+  - {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11}
+  - {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07}
+  - {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08}
+  - {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitENETPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitENETPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitUSDHCPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
+  - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
+  - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
+  - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
+  - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
+  - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
+  - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitUSDHCPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitUSDHCPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
+  - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h
new file mode 100644
index 000000000..bf494b6f6
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/pin_mux.h
@@ -0,0 +1,744 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x0200U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
+
+/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       9U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                      9U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                         (1U << 9U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                           9U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                              (1U << 9U)   /*!< PORT pin mask */
+
+/* WAKEUP (coord L6), SD_PWREN */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO5   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    0U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO5   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   0U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 0U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO5   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        0U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 0U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< Signal name */
+
+/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_EMC_09 (coord C2), SEMC_A0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_EMC_10 (coord G1), SEMC_A1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_11 (coord G3), SEMC_A2 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_12 (coord H1), SEMC_A3 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_13 (coord A6), SEMC_A4 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_14 (coord B6), SEMC_A5 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_15 (coord B1), SEMC_A6 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_16 (coord A5), SEMC_A7 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_17 (coord A4), SEMC_A8 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_18 (coord B2), SEMC_A9 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_23 (coord G2), SEMC_A10 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_19 (coord B4), SEMC_A11 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_20 (coord A3), SEMC_A12 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_21 (coord C1), SEMC_BA0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_22 (coord F1), SEMC_BA1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_24 (coord D3), SEMC_CAS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL                             semc_cas   /*!< Signal name */
+
+/* GPIO_EMC_27 (coord A2), SEMC_CKE */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL                             semc_cke   /*!< Signal name */
+
+/* GPIO_EMC_26 (coord B3), SEMC_CLK */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL                             semc_clk   /*!< Signal name */
+
+/* GPIO_EMC_00 (coord E3), SEMC_D0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_EMC_01 (coord F3), SEMC_D1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_02 (coord F4), SEMC_D2 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_03 (coord G4), SEMC_D3 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_04 (coord F2), SEMC_D4 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_05 (coord G5), SEMC_D5 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_06 (coord H5), SEMC_D6 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_07 (coord H4), SEMC_D7 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_30 (coord C6), SEMC_D8 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_31 (coord C5), SEMC_D9 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_32 (coord D5), SEMC_D10 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_33 (coord C4), SEMC_D11 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_34 (coord D4), SEMC_D12 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_35 (coord E5), SEMC_D13 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL                                 13U   /*!< Signal channel */
+
+/* GPIO_EMC_36 (coord C3), SEMC_D14 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL                                 14U   /*!< Signal channel */
+
+/* GPIO_EMC_37 (coord E4), SEMC_D15 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL                                 15U   /*!< Signal channel */
+
+/* GPIO_EMC_08 (coord H3), SEMC_DM0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_38 (coord D6), SEMC_DM1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_25 (coord D2), SEMC_RAS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL                             semc_ras   /*!< Signal name */
+
+/* GPIO_EMC_28 (coord D1), SEMC_WE */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL                               semc_we   /*!< Signal name */
+
+/* GPIO_EMC_29 (coord E1), SEMC_CS0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL                                   CS   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_39 (coord B7), SEMC_DQS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL                             semc_dqs   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitSDRAMPins(void);
+
+#define BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x10U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
+
+/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D9_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D9_CHANNEL                                      9U   /*!< Signal channel */
+
+/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D8_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D8_CHANNEL                                      8U   /*!< Signal channel */
+
+/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D7_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D7_CHANNEL                                      7U   /*!< Signal channel */
+
+/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D6_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D6_CHANNEL                                      6U   /*!< Signal channel */
+
+/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D5_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D5_CHANNEL                                      5U   /*!< Signal channel */
+
+/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D4_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D4_CHANNEL                                      4U   /*!< Signal channel */
+
+/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D2_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D2_CHANNEL                                      2U   /*!< Signal channel */
+
+/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D3_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D3_CHANNEL                                      3U   /*!< Signal channel */
+
+/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL                              CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL                           csi_pixclk   /*!< Signal name */
+
+/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL                                CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL                               csi_mclk   /*!< Signal name */
+
+/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL                               CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL                             csi_vsync   /*!< Signal name */
+
+/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL                               CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL                             csi_hsync   /*!< Signal name */
+
+/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL                          LPI2C1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL                                 SCL   /*!< Signal name */
+
+/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL                          LPI2C1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL                                 SDA   /*!< Signal name */
+
+/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL                              GPIO1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL                                    4U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO                                    GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN                                   4U   /*!< GPIO pin number */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK                      (1U << 4U)   /*!< GPIO pin mask */
+#define BOARD_INITCSIPINS_CSI_PWDN_PORT                                    GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITCSIPINS_CSI_PWDN_PIN                                        4U   /*!< PORT pin number */
+#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK                           (1U << 4U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCSIPins(void);
+
+#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x04U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
+#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x80000000U /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */
+
+/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_B0_00 (coord D7), LCDIF_CLK */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL                             lcdif_clk   /*!< Signal name */
+
+/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL                                    4U   /*!< Signal channel */
+
+/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL                                    5U   /*!< Signal channel */
+
+/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL                                    6U   /*!< Signal channel */
+
+/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL                                    7U   /*!< Signal channel */
+
+/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL                                    8U   /*!< Signal channel */
+
+/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL                                    9U   /*!< Signal channel */
+
+/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL                                  10U   /*!< Signal channel */
+
+/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL                                  11U   /*!< Signal channel */
+
+/* GPIO_B1_00 (coord A11), LCDIF_D12 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL                                  12U   /*!< Signal channel */
+
+/* GPIO_B1_01 (coord B11), LCDIF_D13 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL                                  13U   /*!< Signal channel */
+
+/* GPIO_B1_02 (coord C11), LCDIF_D14 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL                                  14U   /*!< Signal channel */
+
+/* GPIO_B1_03 (coord D11), LCDIF_D15 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL                                  15U   /*!< Signal channel */
+
+/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL                          LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL                       lcdif_enable   /*!< Signal name */
+
+/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL                           LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL                         lcdif_hsync   /*!< Signal name */
+
+/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL                           LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL                         lcdif_vsync   /*!< Signal name */
+
+/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL                         GPIO2   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL                           gpio_io   /*!< Signal name */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL                              31U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO                               GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN                             31U   /*!< GPIO pin number */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK                (1U << 31U)   /*!< GPIO pin mask */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT                               GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN                                  31U   /*!< PORT pin number */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK                     (1U << 31U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitLCDPins(void);
+
+/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL                                CAN2   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN2_TX_SIGNAL                                      TX   /*!< Signal name */
+
+/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL                                CAN2   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN2_RX_SIGNAL                                      RX   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCANPins(void);
+
+/* GPIO_EMC_40 (coord A7), ENET_MDC */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL                              ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDC_SIGNAL                              enet_mdc   /*!< Signal name */
+
+/* GPIO_EMC_41 (coord C7), ENET_MDIO */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL                            enet_mdio   /*!< Signal name */
+
+/* GPIO_B1_10 (coord B13), ENET_TX_CLK */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL                       enet_ref_clk   /*!< Signal name */
+
+/* GPIO_B1_04 (coord E12), ENET_RXD0 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_B1_05 (coord D12), ENET_RXD1 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_B1_06 (coord C12), ENET_CRS_DV */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL                         enet_rx_en   /*!< Signal name */
+
+/* GPIO_B1_11 (coord C13), ENET_RXER */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXER_SIGNAL                           enet_rx_er   /*!< Signal name */
+
+/* GPIO_B1_07 (coord B12), ENET_TXD0 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_B1_08 (coord A12), ENET_TXD1 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_B1_09 (coord A13), ENET_TXEN */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL                           enet_tx_en   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitENETPins(void);
+
+/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL                             usdhc_cmd   /*!< Signal name */
+
+/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL                             usdhc_clk   /*!< Signal name */
+
+/* GPIO_B1_14 (coord C14), SD0_VSELECT */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL                        USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL                     usdhc_vselect   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitUSDHCPins(void);
+
+/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< Signal name */
+
+/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL                      FLEXSPI_A_DQS   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h
index 28d7db57d..b4ef4ad4f 100644
--- a/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h
@@ -18,7 +18,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -26,7 +26,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -124,7 +124,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -185,7 +185,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -253,7 +253,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex
new file mode 100644
index 000000000..b9353ba44
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex
@@ -0,0 +1,1032 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1060-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="2174caba-38fe-48d5-8f89-42a23354d23b" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1062xxxxA</processor>
+      <package>MIMXRT1062DVL6A</package>
+      <board>MIMXRT1060-EVK</board>
+      <board_revision>A2</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="F14" pin_signal="GPIO_AD_B0_09" label="JTAG_TDI/J21[5]/ENET_RST/J22[5]" identifier="USER_LED"/>
+               <pin_label pin_num="L6" pin_signal="WAKEUP" label="SD_PWREN" identifier="USER_BUTTON"/>
+            </pin_labels>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO5" description="Peripheral GPIO5 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO1" signal="gpio_io, 09" pin_num="F14" pin_signal="GPIO_AD_B0_09">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO5" signal="gpio_io, 00" pin_num="L6" pin_signal="WAKEUP">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="E1" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="B7" pin_signal="GPIO_EMC_39"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 02" pin_num="M11" pin_signal="GPIO_AD_B0_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="96c1cec6-3bd3-47a2-8301-f38e4b0dd25f" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="eb0900eb-d552-4097-9dcf-a07e592a887f" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="f67d9a64-c26d-4421-9805-a062b24146f2" type="csi" type_id="csi_3739ec1355c7b915be929f3b7e35095b" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="f2c6cd0a-751c-4424-9248-a4d98da47de7" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="01f250e2-83d7-4b7b-a98d-772d1c3bdb42" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="90a0c31d-6042-4687-af0f-0892536bc1ba" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="3"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="b31fa225-2a52-486b-9c5c-33a184a2c716" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="aa3cc953-557b-4557-b7fe-6fedc31acf98" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="8b3f852e-ee1e-45e9-abff-0ff722f1d65d" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="539d282e-5136-4289-9058-9a46b221ca45" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="6e4c02c4-0524-4905-91b5-01d2e2502186" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c6d8fd36-2bbd-44c6-a160-54e7e12d0807" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="7d3626d3-4536-4838-a35d-3b8cf5a2bd71" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="738ea8df-6176-4e52-b4c7-b88aa9c17d13" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake
new file mode 100644
index 000000000..cd75c5227
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.cmake
@@ -0,0 +1,16 @@
+set(MCU_VARIANT MIMXRT1064)
+
+set(JLINK_DEVICE MIMXRT1064xxx6A)
+set(PYOCD_TARGET mimxrt1064)
+set(NXPLINK_DEVICE MIMXRT1064xxxxA:EVK-MIMXRT1064)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkmimxrt1064_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1064DVL6A
+    BOARD_TUD_RHPORT=0
+    BOARD_TUH_RHPORT=1
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h
index 5f51e91a2..7fca5adef 100644
--- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -24,29 +24,24 @@
  * This file is part of the TinyUSB stack.
  */
 
+#ifndef BOARD_MIMXRT1064_EVKB_H_
+#define BOARD_MIMXRT1064_EVKB_H_
 
-#ifndef BOARD_H_
-#define BOARD_H_
-
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (0x400000U)
 
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
-#define LED_PORT              GPIO1
-#define LED_PIN               9
+// LED: IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
-// SW8 button
-#define BUTTON_PINMUX         IOMUXC_SNVS_WAKEUP_GPIO5_IO00
-#define BUTTON_PORT           GPIO5
-#define BUTTON_PIN            0
+// SW8 button: IOMUXC_SNVS_WAKEUP_GPIO5_IO00
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
 #define BUTTON_STATE_ACTIVE   0
 
-// UART
+// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX
 #define UART_PORT             LPUART1
-#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_13_LPUART1_RX
-#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_12_LPUART1_TX
-
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 
-#endif /* BOARD_H_ */
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk
index 00b574c52..ddde419ae 100644
--- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk
@@ -7,8 +7,8 @@ JLINK_DEVICE = MIMXRT1064xxx6A
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1064
 
-BOARD_TUD_RHPORT = 1
-BOARD_TUH_RHPORT = 0
+BOARD_TUD_RHPORT = 0
+BOARD_TUH_RHPORT = 1
 
 # flash using pyocd
 flash: flash-pyocd
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c
new file mode 100644
index 000000000..778ab02f2
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c
@@ -0,0 +1,511 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1064xxxxA
+package_id: MIMXRT1064DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1064-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD1_DIV.scale, value: '16', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI2) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI2 clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI2, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+#endif
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI2) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI2 clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI2, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c
new file mode 100644
index 000000000..8e975dc72
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.c
@@ -0,0 +1,497 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1064xxxxA
+package_id: MIMXRT1064DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1064-EVK
+pin_labels:
+- {pin_num: F14, pin_signal: GPIO_AD_B0_09, label: 'JTAG_TDI/J21[5]/ENET_RST/J22[5]', identifier: USER_LED}
+- {pin_num: L6, pin_signal: WAKEUP, label: SD_PWREN, identifier: USER_BUTTON}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: F14, peripheral: GPIO1, signal: 'gpio_io, 09', pin_signal: GPIO_AD_B0_09, direction: OUTPUT, pull_keeper_select: Keeper}
+  - {pin_num: L6, peripheral: GPIO5, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+  CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
+
+  /* GPIO configuration of USER_LED on GPIO_AD_B0_09 (pin F14) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_AD_B0_09 (pin F14) */
+  GPIO_PinInit(GPIO1, 9U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on WAKEUP (pin L6) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on WAKEUP (pin L6) */
+  GPIO_PinInit(GPIO5, 0U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinMux(IOMUXC_SNVS_WAKEUP_GPIO5_IO00, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_09_GPIO1_IO09, 0x50A0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitDEBUG_UARTPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitSDRAMPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: C2, peripheral: SEMC, signal: 'ADDR, 00', pin_signal: GPIO_EMC_09}
+  - {pin_num: G1, peripheral: SEMC, signal: 'ADDR, 01', pin_signal: GPIO_EMC_10}
+  - {pin_num: G3, peripheral: SEMC, signal: 'ADDR, 02', pin_signal: GPIO_EMC_11}
+  - {pin_num: H1, peripheral: SEMC, signal: 'ADDR, 03', pin_signal: GPIO_EMC_12}
+  - {pin_num: A6, peripheral: SEMC, signal: 'ADDR, 04', pin_signal: GPIO_EMC_13}
+  - {pin_num: B6, peripheral: SEMC, signal: 'ADDR, 05', pin_signal: GPIO_EMC_14}
+  - {pin_num: B1, peripheral: SEMC, signal: 'ADDR, 06', pin_signal: GPIO_EMC_15}
+  - {pin_num: A5, peripheral: SEMC, signal: 'ADDR, 07', pin_signal: GPIO_EMC_16}
+  - {pin_num: A4, peripheral: SEMC, signal: 'ADDR, 08', pin_signal: GPIO_EMC_17}
+  - {pin_num: B2, peripheral: SEMC, signal: 'ADDR, 09', pin_signal: GPIO_EMC_18}
+  - {pin_num: G2, peripheral: SEMC, signal: 'ADDR, 10', pin_signal: GPIO_EMC_23}
+  - {pin_num: B4, peripheral: SEMC, signal: 'ADDR, 11', pin_signal: GPIO_EMC_19}
+  - {pin_num: A3, peripheral: SEMC, signal: 'ADDR, 12', pin_signal: GPIO_EMC_20}
+  - {pin_num: C1, peripheral: SEMC, signal: 'BA, 0', pin_signal: GPIO_EMC_21}
+  - {pin_num: F1, peripheral: SEMC, signal: 'BA, 1', pin_signal: GPIO_EMC_22}
+  - {pin_num: D3, peripheral: SEMC, signal: semc_cas, pin_signal: GPIO_EMC_24}
+  - {pin_num: A2, peripheral: SEMC, signal: semc_cke, pin_signal: GPIO_EMC_27}
+  - {pin_num: B3, peripheral: SEMC, signal: semc_clk, pin_signal: GPIO_EMC_26}
+  - {pin_num: E3, peripheral: SEMC, signal: 'DATA, 00', pin_signal: GPIO_EMC_00}
+  - {pin_num: F3, peripheral: SEMC, signal: 'DATA, 01', pin_signal: GPIO_EMC_01}
+  - {pin_num: F4, peripheral: SEMC, signal: 'DATA, 02', pin_signal: GPIO_EMC_02}
+  - {pin_num: G4, peripheral: SEMC, signal: 'DATA, 03', pin_signal: GPIO_EMC_03}
+  - {pin_num: F2, peripheral: SEMC, signal: 'DATA, 04', pin_signal: GPIO_EMC_04}
+  - {pin_num: G5, peripheral: SEMC, signal: 'DATA, 05', pin_signal: GPIO_EMC_05}
+  - {pin_num: H5, peripheral: SEMC, signal: 'DATA, 06', pin_signal: GPIO_EMC_06}
+  - {pin_num: H4, peripheral: SEMC, signal: 'DATA, 07', pin_signal: GPIO_EMC_07}
+  - {pin_num: C6, peripheral: SEMC, signal: 'DATA, 08', pin_signal: GPIO_EMC_30}
+  - {pin_num: C5, peripheral: SEMC, signal: 'DATA, 09', pin_signal: GPIO_EMC_31}
+  - {pin_num: D5, peripheral: SEMC, signal: 'DATA, 10', pin_signal: GPIO_EMC_32}
+  - {pin_num: C4, peripheral: SEMC, signal: 'DATA, 11', pin_signal: GPIO_EMC_33}
+  - {pin_num: D4, peripheral: SEMC, signal: 'DATA, 12', pin_signal: GPIO_EMC_34}
+  - {pin_num: E5, peripheral: SEMC, signal: 'DATA, 13', pin_signal: GPIO_EMC_35}
+  - {pin_num: C3, peripheral: SEMC, signal: 'DATA, 14', pin_signal: GPIO_EMC_36}
+  - {pin_num: E4, peripheral: SEMC, signal: 'DATA, 15', pin_signal: GPIO_EMC_37}
+  - {pin_num: H3, peripheral: SEMC, signal: 'DM, 0', pin_signal: GPIO_EMC_08}
+  - {pin_num: D6, peripheral: SEMC, signal: 'DM, 1', pin_signal: GPIO_EMC_38}
+  - {pin_num: D2, peripheral: SEMC, signal: semc_ras, pin_signal: GPIO_EMC_25}
+  - {pin_num: D1, peripheral: SEMC, signal: semc_we, pin_signal: GPIO_EMC_28}
+  - {pin_num: E1, peripheral: SEMC, signal: 'CS, 0', pin_signal: GPIO_EMC_29}
+  - {pin_num: B7, peripheral: SEMC, signal: semc_dqs, pin_signal: GPIO_EMC_39}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitSDRAMPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitSDRAMPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_00_SEMC_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_01_SEMC_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_02_SEMC_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_03_SEMC_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_04_SEMC_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_05_SEMC_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_06_SEMC_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_07_SEMC_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_08_SEMC_DM00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_09_SEMC_ADDR00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_10_SEMC_ADDR01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_SEMC_ADDR02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_SEMC_ADDR03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_13_SEMC_ADDR04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_14_SEMC_ADDR05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_15_SEMC_ADDR06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_16_SEMC_ADDR07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_17_SEMC_ADDR08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_18_SEMC_ADDR09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_19_SEMC_ADDR11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_20_SEMC_ADDR12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_21_SEMC_BA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_22_SEMC_BA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_23_SEMC_ADDR10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_24_SEMC_CAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_25_SEMC_RAS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_26_SEMC_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_27_SEMC_CKE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_28_SEMC_WE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_29_SEMC_CS0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_30_SEMC_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_31_SEMC_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_32_SEMC_DATA10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_33_SEMC_DATA11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_34_SEMC_DATA12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_35_SEMC_DATA13, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_36_SEMC_DATA14, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_37_SEMC_DATA15, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_38_SEMC_DM01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_39_SEMC_DQS, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCSIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: H13, peripheral: CSI, signal: 'csi_data, 09', pin_signal: GPIO_AD_B1_08}
+  - {pin_num: M13, peripheral: CSI, signal: 'csi_data, 08', pin_signal: GPIO_AD_B1_09}
+  - {pin_num: L13, peripheral: CSI, signal: 'csi_data, 07', pin_signal: GPIO_AD_B1_10}
+  - {pin_num: J13, peripheral: CSI, signal: 'csi_data, 06', pin_signal: GPIO_AD_B1_11}
+  - {pin_num: H12, peripheral: CSI, signal: 'csi_data, 05', pin_signal: GPIO_AD_B1_12}
+  - {pin_num: H11, peripheral: CSI, signal: 'csi_data, 04', pin_signal: GPIO_AD_B1_13}
+  - {pin_num: J14, peripheral: CSI, signal: 'csi_data, 02', pin_signal: GPIO_AD_B1_15}
+  - {pin_num: G12, peripheral: CSI, signal: 'csi_data, 03', pin_signal: GPIO_AD_B1_14}
+  - {pin_num: L12, peripheral: CSI, signal: csi_pixclk, pin_signal: GPIO_AD_B1_04}
+  - {pin_num: K12, peripheral: CSI, signal: csi_mclk, pin_signal: GPIO_AD_B1_05}
+  - {pin_num: J12, peripheral: CSI, signal: csi_vsync, pin_signal: GPIO_AD_B1_06}
+  - {pin_num: K10, peripheral: CSI, signal: csi_hsync, pin_signal: GPIO_AD_B1_07}
+  - {pin_num: J11, peripheral: LPI2C1, signal: SCL, pin_signal: GPIO_AD_B1_00, identifier: CSI_I2C_SCL, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: K11, peripheral: LPI2C1, signal: SDA, pin_signal: GPIO_AD_B1_01, identifier: CSI_I2C_SDA, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Up_22K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Enable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: F11, peripheral: GPIO1, signal: 'gpio_io, 04', pin_signal: GPIO_AD_B0_04}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCSIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCSIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_04_GPIO1_IO04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_05_CSI_MCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_CSI_VSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_CSI_HSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_08_CSI_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_09_CSI_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_10_CSI_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_11_CSI_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_12_CSI_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_13_CSI_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_14_CSI_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_15_CSI_DATA02, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL, 0xD8B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA, 0xD8B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitLCDPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: C8, peripheral: LCDIF, signal: 'lcdif_data, 00', pin_signal: GPIO_B0_04, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B8, peripheral: LCDIF, signal: 'lcdif_data, 01', pin_signal: GPIO_B0_05, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A8, peripheral: LCDIF, signal: 'lcdif_data, 02', pin_signal: GPIO_B0_06, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D7, peripheral: LCDIF, signal: lcdif_clk, pin_signal: GPIO_B0_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A9, peripheral: LCDIF, signal: 'lcdif_data, 03', pin_signal: GPIO_B0_07, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B9, peripheral: LCDIF, signal: 'lcdif_data, 04', pin_signal: GPIO_B0_08, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C9, peripheral: LCDIF, signal: 'lcdif_data, 05', pin_signal: GPIO_B0_09, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D9, peripheral: LCDIF, signal: 'lcdif_data, 06', pin_signal: GPIO_B0_10, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A10, peripheral: LCDIF, signal: 'lcdif_data, 07', pin_signal: GPIO_B0_11, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C10, peripheral: LCDIF, signal: 'lcdif_data, 08', pin_signal: GPIO_B0_12, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D10, peripheral: LCDIF, signal: 'lcdif_data, 09', pin_signal: GPIO_B0_13, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E10, peripheral: LCDIF, signal: 'lcdif_data, 10', pin_signal: GPIO_B0_14, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E11, peripheral: LCDIF, signal: 'lcdif_data, 11', pin_signal: GPIO_B0_15, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: A11, peripheral: LCDIF, signal: 'lcdif_data, 12', pin_signal: GPIO_B1_00, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B11, peripheral: LCDIF, signal: 'lcdif_data, 13', pin_signal: GPIO_B1_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: C11, peripheral: LCDIF, signal: 'lcdif_data, 14', pin_signal: GPIO_B1_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D11, peripheral: LCDIF, signal: 'lcdif_data, 15', pin_signal: GPIO_B1_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E7, peripheral: LCDIF, signal: lcdif_enable, pin_signal: GPIO_B0_01, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: E8, peripheral: LCDIF, signal: lcdif_hsync, pin_signal: GPIO_B0_02, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: D8, peripheral: LCDIF, signal: lcdif_vsync, pin_signal: GPIO_B0_03, hysteresis_enable: Enable, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+  - {pin_num: B14, peripheral: GPIO2, signal: 'gpio_io, 31', pin_signal: GPIO_B1_15, slew_rate: Slow}
+  - {pin_num: M11, peripheral: GPIO1, signal: 'gpio_io, 02', pin_signal: GPIO_AD_B0_02}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitLCDPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitLCDPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_02_GPIO1_IO02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_00_LCD_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_LCD_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_LCD_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_06_LCD_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_07_LCD_DATA03, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_08_LCD_DATA04, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_09_LCD_DATA05, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_10_LCD_DATA06, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_11_LCD_DATA07, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_12_LCD_DATA08, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_13_LCD_DATA09, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_14_LCD_DATA10, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_15_LCD_DATA11, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_00_LCD_DATA12, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_01_LCD_DATA13, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_02_LCD_DATA14, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_03_LCD_DATA15, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0U);
+  IOMUXC_GPR->GPR26 = ((IOMUXC_GPR->GPR26 &
+    (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL(0x00U)
+    );
+  IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
+    (~(BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_00_LCD_CLK, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_LCD_ENABLE, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_02_LCD_HSYNC, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_03_LCD_VSYNC, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_LCD_DATA00, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_LCD_DATA01, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_06_LCD_DATA02, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_07_LCD_DATA03, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_08_LCD_DATA04, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_09_LCD_DATA05, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_10_LCD_DATA06, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_11_LCD_DATA07, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_12_LCD_DATA08, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_13_LCD_DATA09, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_14_LCD_DATA10, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_15_LCD_DATA11, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_00_LCD_DATA12, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_01_LCD_DATA13, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_02_LCD_DATA14, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_03_LCD_DATA15, 0x01B0B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B1_15_GPIO2_IO31, 0x10B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitCANPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: H14, peripheral: CAN2, signal: TX, pin_signal: GPIO_AD_B0_14}
+  - {pin_num: L10, peripheral: CAN2, signal: RX, pin_signal: GPIO_AD_B0_15}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitCANPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitCANPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitENETPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: A7, peripheral: ENET, signal: enet_mdc, pin_signal: GPIO_EMC_40}
+  - {pin_num: C7, peripheral: ENET, signal: enet_mdio, pin_signal: GPIO_EMC_41}
+  - {pin_num: B13, peripheral: ENET, signal: enet_ref_clk, pin_signal: GPIO_B1_10}
+  - {pin_num: E12, peripheral: ENET, signal: 'enet_rx_data, 0', pin_signal: GPIO_B1_04}
+  - {pin_num: D12, peripheral: ENET, signal: 'enet_rx_data, 1', pin_signal: GPIO_B1_05}
+  - {pin_num: C12, peripheral: ENET, signal: enet_rx_en, pin_signal: GPIO_B1_06}
+  - {pin_num: C13, peripheral: ENET, signal: enet_rx_er, pin_signal: GPIO_B1_11}
+  - {pin_num: B12, peripheral: ENET, signal: 'enet_tx_data, 0', pin_signal: GPIO_B1_07}
+  - {pin_num: A12, peripheral: ENET, signal: 'enet_tx_data, 1', pin_signal: GPIO_B1_08}
+  - {pin_num: A13, peripheral: ENET, signal: enet_tx_en, pin_signal: GPIO_B1_09}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitENETPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitENETPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_04_ENET_RX_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_05_ENET_RX_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_06_ENET_RX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_07_ENET_TX_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_08_ENET_TX_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_09_ENET_TX_EN, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_10_ENET_REF_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_11_ENET_RX_ER, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_40_ENET_MDC, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_41_ENET_MDIO, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitUSDHCPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
+  - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
+  - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
+  - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
+  - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
+  - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
+  - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitUSDHCPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitUSDHCPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
+  - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h
new file mode 100644
index 000000000..bf494b6f6
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/pin_mux.h
@@ -0,0 +1,744 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x0200U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
+
+/* GPIO_AD_B0_09 (coord F14), JTAG_TDI/J21[5]/ENET_RST/J22[5] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO1   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       9U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                      9U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                         (1U << 9U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                           9U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                              (1U << 9U)   /*!< PORT pin mask */
+
+/* WAKEUP (coord L6), SD_PWREN */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO5   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    0U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO5   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   0U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 0U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO5   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        0U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 0U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< Signal name */
+
+/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_EMC_09 (coord C2), SEMC_A0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A0_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_EMC_10 (coord G1), SEMC_A1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_11 (coord G3), SEMC_A2 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_12 (coord H1), SEMC_A3 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_13 (coord A6), SEMC_A4 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_14 (coord B6), SEMC_A5 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_15 (coord B1), SEMC_A6 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_16 (coord A5), SEMC_A7 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_17 (coord A4), SEMC_A8 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_18 (coord B2), SEMC_A9 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_SIGNAL                                  ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_23 (coord G2), SEMC_A10 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_19 (coord B4), SEMC_A11 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_20 (coord A3), SEMC_A12 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_A12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_SIGNAL                                 ADDR   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_A12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_21 (coord C1), SEMC_BA0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_22 (coord F1), SEMC_BA1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_SIGNAL                                   BA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_BA1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_24 (coord D3), SEMC_CAS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CAS_SIGNAL                             semc_cas   /*!< Signal name */
+
+/* GPIO_EMC_27 (coord A2), SEMC_CKE */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CKE_SIGNAL                             semc_cke   /*!< Signal name */
+
+/* GPIO_EMC_26 (coord B3), SEMC_CLK */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CLK_SIGNAL                             semc_clk   /*!< Signal name */
+
+/* GPIO_EMC_00 (coord E3), SEMC_D0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D0_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D0_CHANNEL                                   0U   /*!< Signal channel */
+
+/* GPIO_EMC_01 (coord F3), SEMC_D1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D1_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D1_CHANNEL                                   1U   /*!< Signal channel */
+
+/* GPIO_EMC_02 (coord F4), SEMC_D2 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D2_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D2_CHANNEL                                   2U   /*!< Signal channel */
+
+/* GPIO_EMC_03 (coord G4), SEMC_D3 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D3_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D3_CHANNEL                                   3U   /*!< Signal channel */
+
+/* GPIO_EMC_04 (coord F2), SEMC_D4 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D4_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D4_CHANNEL                                   4U   /*!< Signal channel */
+
+/* GPIO_EMC_05 (coord G5), SEMC_D5 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D5_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D5_CHANNEL                                   5U   /*!< Signal channel */
+
+/* GPIO_EMC_06 (coord H5), SEMC_D6 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D6_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D6_CHANNEL                                   6U   /*!< Signal channel */
+
+/* GPIO_EMC_07 (coord H4), SEMC_D7 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D7_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D7_CHANNEL                                   7U   /*!< Signal channel */
+
+/* GPIO_EMC_30 (coord C6), SEMC_D8 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D8_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D8_CHANNEL                                   8U   /*!< Signal channel */
+
+/* GPIO_EMC_31 (coord C5), SEMC_D9 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D9_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_SIGNAL                                  DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D9_CHANNEL                                   9U   /*!< Signal channel */
+
+/* GPIO_EMC_32 (coord D5), SEMC_D10 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D10_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D10_CHANNEL                                 10U   /*!< Signal channel */
+
+/* GPIO_EMC_33 (coord C4), SEMC_D11 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D11_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D11_CHANNEL                                 11U   /*!< Signal channel */
+
+/* GPIO_EMC_34 (coord D4), SEMC_D12 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D12_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D12_CHANNEL                                 12U   /*!< Signal channel */
+
+/* GPIO_EMC_35 (coord E5), SEMC_D13 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D13_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D13_CHANNEL                                 13U   /*!< Signal channel */
+
+/* GPIO_EMC_36 (coord C3), SEMC_D14 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D14_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D14_CHANNEL                                 14U   /*!< Signal channel */
+
+/* GPIO_EMC_37 (coord E4), SEMC_D15 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_D15_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_SIGNAL                                 DATA   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_D15_CHANNEL                                 15U   /*!< Signal channel */
+
+/* GPIO_EMC_08 (coord H3), SEMC_DM0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_38 (coord D6), SEMC_DM1 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_SIGNAL                                   DM   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_DM1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_EMC_25 (coord D2), SEMC_RAS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_RAS_SIGNAL                             semc_ras   /*!< Signal name */
+
+/* GPIO_EMC_28 (coord D1), SEMC_WE */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_WE_PERIPHERAL                              SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_WE_SIGNAL                               semc_we   /*!< Signal name */
+
+/* GPIO_EMC_29 (coord E1), SEMC_CS0 */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_SIGNAL                                   CS   /*!< Signal name */
+#define BOARD_INITSDRAMPINS_SEMC_CS0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_EMC_39 (coord B7), SEMC_DQS */
+/* Routed pin properties */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_PERIPHERAL                             SEMC   /*!< Peripheral name */
+#define BOARD_INITSDRAMPINS_SEMC_DQS_SIGNAL                             semc_dqs   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitSDRAMPins(void);
+
+#define BOARD_INITCSIPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x10U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
+
+/* GPIO_AD_B1_08 (coord H13), AUD_INT/CSI_D9//J35[13]/J22[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D9_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D9_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D9_CHANNEL                                      9U   /*!< Signal channel */
+
+/* GPIO_AD_B1_09 (coord M13), SAI1_MCLK/CSI_D8/J35[11] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D8_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D8_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D8_CHANNEL                                      8U   /*!< Signal channel */
+
+/* GPIO_AD_B1_10 (coord L13), SAI1_RX_SYNC/CSI_D7/J35[9]/J23[1] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D7_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D7_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D7_CHANNEL                                      7U   /*!< Signal channel */
+
+/* GPIO_AD_B1_11 (coord J13), SAI1_RX_BCLK/CSI_D6/J35[7]/J23[2] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D6_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D6_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D6_CHANNEL                                      6U   /*!< Signal channel */
+
+/* GPIO_AD_B1_12 (coord H12), SAI1_RXD/CSI_D5/J35[5]/U13[16] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D5_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D5_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D5_CHANNEL                                      5U   /*!< Signal channel */
+
+/* GPIO_AD_B1_13 (coord H11), SAI1_TXD/CSI_D4/J35[3]/U13[14] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D4_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D4_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D4_CHANNEL                                      4U   /*!< Signal channel */
+
+/* GPIO_AD_B1_15 (coord J14), SAI1_TX_SYNC/CSI_D2/J35[6]/U13[13] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D2_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D2_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D2_CHANNEL                                      2U   /*!< Signal channel */
+
+/* GPIO_AD_B1_14 (coord G12), SAI1_TX_BCLK/CSI_D3/J35[4]/U13[12] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_D3_PERIPHERAL                                  CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_D3_SIGNAL                                 csi_data   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_D3_CHANNEL                                      3U   /*!< Signal channel */
+
+/* GPIO_AD_B1_04 (coord L12), CSI_PIXCLK/J35[8]/J23[3] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_PIXCLK_PERIPHERAL                              CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_PIXCLK_SIGNAL                           csi_pixclk   /*!< Signal name */
+
+/* GPIO_AD_B1_05 (coord K12), CSI_MCLK/J35[12]/J23[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_MCLK_PERIPHERAL                                CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_MCLK_SIGNAL                               csi_mclk   /*!< Signal name */
+
+/* GPIO_AD_B1_06 (coord J12), CSI_VSYNC/J35[18]/J22[2]/UART_TX */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_VSYNC_PERIPHERAL                               CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_VSYNC_SIGNAL                             csi_vsync   /*!< Signal name */
+
+/* GPIO_AD_B1_07 (coord K10), CSI_HSYNC/J35[16]/J22[1]/UART_RX */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_HSYNC_PERIPHERAL                               CSI   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_HSYNC_SIGNAL                             csi_hsync   /*!< Signal name */
+
+/* GPIO_AD_B1_00 (coord J11), I2C1_SCL/CSI_I2C_SCL/J35[20]/J23[6]/U13[17]/U32[4] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_I2C_SCL_PERIPHERAL                          LPI2C1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_I2C_SCL_SIGNAL                                 SCL   /*!< Signal name */
+
+/* GPIO_AD_B1_01 (coord K11), I2C1_SDA/CSI_I2C_SDA/J35[22]/J23[5]/U13[18]/U32[6] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_I2C_SDA_PERIPHERAL                          LPI2C1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_I2C_SDA_SIGNAL                                 SDA   /*!< Signal name */
+
+/* GPIO_AD_B0_04 (coord F11), CSI_PWDN/J35[17]/BOOT_MODE[0] */
+/* Routed pin properties */
+#define BOARD_INITCSIPINS_CSI_PWDN_PERIPHERAL                              GPIO1   /*!< Peripheral name */
+#define BOARD_INITCSIPINS_CSI_PWDN_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITCSIPINS_CSI_PWDN_CHANNEL                                    4U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO                                    GPIO1   /*!< GPIO peripheral base pointer */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN                                   4U   /*!< GPIO pin number */
+#define BOARD_INITCSIPINS_CSI_PWDN_GPIO_PIN_MASK                      (1U << 4U)   /*!< GPIO pin mask */
+#define BOARD_INITCSIPINS_CSI_PWDN_PORT                                    GPIO1   /*!< PORT peripheral base pointer */
+#define BOARD_INITCSIPINS_CSI_PWDN_PIN                                        4U   /*!< PORT pin number */
+#define BOARD_INITCSIPINS_CSI_PWDN_PIN_MASK                           (1U << 4U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCSIPins(void);
+
+#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR26_GPIO_MUX1_GPIO_SEL_MASK 0x04U /*!< GPIO1 and GPIO6 share same IO MUX function, GPIO_MUX1 selects one GPIO function: affected bits mask */
+#define BOARD_INITLCDPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x80000000U /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */
+
+/* GPIO_B0_04 (coord C8), LCDIF_D0/BT_CFG[0] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D0_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D0_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_B0_05 (coord B8), LCDIF_D1/BT_CFG[1] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D1_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D1_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_B0_06 (coord A8), LCDIF_D2/BT_CFG[2] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D2_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D2_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_B0_00 (coord D7), LCDIF_CLK */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_CLK_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_CLK_SIGNAL                             lcdif_clk   /*!< Signal name */
+
+/* GPIO_B0_07 (coord A9), LCDIF_D3/BT_CFG[3] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D3_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D3_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_B0_08 (coord B9), LCDIF_D4/BT_CFG[4] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D4_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D4_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D4_CHANNEL                                    4U   /*!< Signal channel */
+
+/* GPIO_B0_09 (coord C9), LCDIF_D5/BT_CFG[5] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D5_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D5_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D5_CHANNEL                                    5U   /*!< Signal channel */
+
+/* GPIO_B0_10 (coord D9), LCDIF_D6/BT_CFG[6] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D6_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D6_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D6_CHANNEL                                    6U   /*!< Signal channel */
+
+/* GPIO_B0_11 (coord A10), LCDIF_D7/BT_CFG[7] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D7_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D7_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D7_CHANNEL                                    7U   /*!< Signal channel */
+
+/* GPIO_B0_12 (coord C10), LCDIF_D8/BT_CFG[8] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D8_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D8_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D8_CHANNEL                                    8U   /*!< Signal channel */
+
+/* GPIO_B0_13 (coord D10), LCDIF_D9/BT_CFG[9] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D9_PERIPHERAL                              LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D9_SIGNAL                             lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D9_CHANNEL                                    9U   /*!< Signal channel */
+
+/* GPIO_B0_14 (coord E10), LCDIF_D10/BT_CFG[10] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D10_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D10_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D10_CHANNEL                                  10U   /*!< Signal channel */
+
+/* GPIO_B0_15 (coord E11), LCDIF_D11/BT_CFG[11] */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D11_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D11_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D11_CHANNEL                                  11U   /*!< Signal channel */
+
+/* GPIO_B1_00 (coord A11), LCDIF_D12 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D12_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D12_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D12_CHANNEL                                  12U   /*!< Signal channel */
+
+/* GPIO_B1_01 (coord B11), LCDIF_D13 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D13_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D13_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D13_CHANNEL                                  13U   /*!< Signal channel */
+
+/* GPIO_B1_02 (coord C11), LCDIF_D14 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D14_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D14_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D14_CHANNEL                                  14U   /*!< Signal channel */
+
+/* GPIO_B1_03 (coord D11), LCDIF_D15 */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_D15_PERIPHERAL                             LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_D15_SIGNAL                            lcdif_data   /*!< Signal name */
+#define BOARD_INITLCDPINS_LCDIF_D15_CHANNEL                                  15U   /*!< Signal channel */
+
+/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_ENABLE_PERIPHERAL                          LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_ENABLE_SIGNAL                       lcdif_enable   /*!< Signal name */
+
+/* GPIO_B0_02 (coord E8), LCDIF_HSYNC */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_HSYNC_PERIPHERAL                           LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_HSYNC_SIGNAL                         lcdif_hsync   /*!< Signal name */
+
+/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_LCDIF_VSYNC_PERIPHERAL                           LCDIF   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_LCDIF_VSYNC_SIGNAL                         lcdif_vsync   /*!< Signal name */
+
+/* GPIO_B1_15 (coord B14), USB_HOST_PWR/BACKLIGHT_CTL */
+/* Routed pin properties */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PERIPHERAL                         GPIO2   /*!< Peripheral name */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_SIGNAL                           gpio_io   /*!< Signal name */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_CHANNEL                              31U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO                               GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN                             31U   /*!< GPIO pin number */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_GPIO_PIN_MASK                (1U << 31U)   /*!< GPIO pin mask */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PORT                               GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN                                  31U   /*!< PORT pin number */
+#define BOARD_INITLCDPINS_BACKLIGHT_CTL_PIN_MASK                     (1U << 31U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitLCDPins(void);
+
+/* GPIO_AD_B0_14 (coord H14), CAN2_TX/U12[1] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN2_TX_PERIPHERAL                                CAN2   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN2_TX_SIGNAL                                      TX   /*!< Signal name */
+
+/* GPIO_AD_B0_15 (coord L10), CAN2_RX/U12[4] */
+/* Routed pin properties */
+#define BOARD_INITCANPINS_CAN2_RX_PERIPHERAL                                CAN2   /*!< Peripheral name */
+#define BOARD_INITCANPINS_CAN2_RX_SIGNAL                                      RX   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitCANPins(void);
+
+/* GPIO_EMC_40 (coord A7), ENET_MDC */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDC_PERIPHERAL                              ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDC_SIGNAL                              enet_mdc   /*!< Signal name */
+
+/* GPIO_EMC_41 (coord C7), ENET_MDIO */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_MDIO_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_MDIO_SIGNAL                            enet_mdio   /*!< Signal name */
+
+/* GPIO_B1_10 (coord B13), ENET_TX_CLK */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TX_CLK_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TX_CLK_SIGNAL                       enet_ref_clk   /*!< Signal name */
+
+/* GPIO_B1_04 (coord E12), ENET_RXD0 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD0_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_B1_05 (coord D12), ENET_RXD1 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXD1_SIGNAL                         enet_rx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_RXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_B1_06 (coord C12), ENET_CRS_DV */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_CRS_DV_PERIPHERAL                           ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_CRS_DV_SIGNAL                         enet_rx_en   /*!< Signal name */
+
+/* GPIO_B1_11 (coord C13), ENET_RXER */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_RXER_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_RXER_SIGNAL                           enet_rx_er   /*!< Signal name */
+
+/* GPIO_B1_07 (coord B12), ENET_TXD0 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD0_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD0_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD0_CHANNEL                                  0U   /*!< Signal channel */
+
+/* GPIO_B1_08 (coord A12), ENET_TXD1 */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXD1_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXD1_SIGNAL                         enet_tx_data   /*!< Signal name */
+#define BOARD_INITENETPINS_ENET_TXD1_CHANNEL                                  1U   /*!< Signal channel */
+
+/* GPIO_B1_09 (coord A13), ENET_TXEN */
+/* Routed pin properties */
+#define BOARD_INITENETPINS_ENET_TXEN_PERIPHERAL                             ENET   /*!< Peripheral name */
+#define BOARD_INITENETPINS_ENET_TXEN_SIGNAL                           enet_tx_en   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitENETPins(void);
+
+/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL                             usdhc_cmd   /*!< Signal name */
+
+/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL                             usdhc_clk   /*!< Signal name */
+
+/* GPIO_B1_14 (coord C14), SD0_VSELECT */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL                        USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL                     usdhc_vselect   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitUSDHCPins(void);
+
+/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< Signal name */
+
+/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL                      FLEXSPI_A_DQS   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c b/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c
index bfb1c2d59..9d30f26bd 100644
--- a/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c
@@ -17,7 +17,7 @@
  ******************************************************************************/
 #if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
 #if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
-__attribute__((section(".boot_hdr.conf")))
+__attribute__((section(".boot_hdr.conf"), used))
 #elif defined(__ICCARM__)
 #pragma location = ".boot_hdr.conf"
 #endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h
index efdfe583f..995e88cb9 100644
--- a/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h
@@ -18,7 +18,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -26,7 +26,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -124,7 +124,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -185,7 +185,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -253,7 +253,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex
new file mode 100644
index 000000000..3f0948101
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex
@@ -0,0 +1,1037 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1064-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="d75e55f6-68ab-46ef-814b-b94593af7f06" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1064xxxxA</processor>
+      <package>MIMXRT1064DVL6A</package>
+      <board>MIMXRT1064-EVK</board>
+      <board_revision>1</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="F14" pin_signal="GPIO_AD_B0_09" label="JTAG_TDI/J21[5]/ENET_RST/J22[5]" identifier="USER_LED"/>
+               <pin_label pin_num="L6" pin_signal="WAKEUP" label="SD_PWREN" identifier="USER_BUTTON"/>
+            </pin_labels>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO5" description="Peripheral GPIO5 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO1" signal="gpio_io, 09" pin_num="F14" pin_signal="GPIO_AD_B0_09">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO5" signal="gpio_io, 00" pin_num="L6" pin_signal="WAKEUP">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="E1" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="B7" pin_signal="GPIO_EMC_39"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 02" pin_num="M11" pin_signal="GPIO_AD_B0_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_DIV.scale" value="16" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="1c6563a6-c68b-40e5-8828-2853c99f95fa" called_from_default_init="true" id_prefix="BOARD_" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="e311ffe2-a68e-4ccc-bab1-c97e2207c5f0" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="7b69310c-fa35-4379-ac89-358df9280646" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_RGB565" uuid="ae342c96-df71-41a3-8419-3cccf201c91e" type="csi" type_id="csi_20660d007fd9c28a0b6ec615663d2939" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="BOARD_BootClockRUN"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected>
+                                 <id>kCSI_HsyncActiveHigh</id>
+                                 <id>kCSI_VsyncActiveLow</id>
+                              </selected>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="81411659-def5-4dbf-839a-d5e5f32dec0b" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD_RGB565" uuid="8c491814-4517-44d9-95de-844144e0c6b5" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="2"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="352dfcca-72ab-4214-bb68-9c1a927c4922" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="fe5e46a0-17b8-41e8-9cbc-ffb6f1cf78c1" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="f79f6878-69b5-4063-9007-0b8e509f7274" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="7ce8b24b-29e6-4b69-86e5-bdfd641cef44" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="ef6a8ae2-3961-4a05-a37f-d42a6a4d8a56" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="00a2a52b-0c40-4dbf-a6d0-5257cfc384e0" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="f30f7e21-6805-4236-9ab3-ff06a6013fa1" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="ea574324-8cc3-4da3-bdfc-2bdba0dfc3df" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake
new file mode 100644
index 000000000..692d9e498
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.cmake
@@ -0,0 +1,17 @@
+set(MCU_VARIANT MIMXRT1176)
+set(MCU_CORE _cm7)
+
+set(JLINK_DEVICE MIMXRT1176xxxA_M7)
+set(PYOCD_TARGET mimxrt1170_cm7)
+set(NXPLINK_DEVICE MIMXRT1176xxxxx:MIMXRT1170-EVK)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/evkbmimxrt1170_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1176DVMAA_cm7
+    BOARD_TUD_RHPORT=0
+    BOARD_TUH_RHPORT=1
+    )
+endfunction()
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h
new file mode 100644
index 000000000..303935517
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.h
@@ -0,0 +1,47 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_MIMXRT1170_EVKB_H_
+#define BOARD_MIMXRT1170_EVKB_H_
+
+// required since iMXRT MCUX-SDK include this file for board size
+#define BOARD_FLASH_SIZE (0x1000000U)
+
+// LED: IOMUXC_GPIO_AD_04_GPIO9_IO03
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
+#define LED_STATE_ON          0
+
+// SW8 button: IOMUXC_WAKEUP_DIG_GPIO13_IO00
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
+#define BUTTON_STATE_ACTIVE   0
+
+// UART: IOMUXC_GPIO_AD_B0_13_LPUART1_RX, IOMUXC_GPIO_AD_B0_12_LPUART1_TX
+#define UART_PORT             LPUART1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_LPUART10_CLK_ROOT
+
+#endif
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk
new file mode 100644
index 000000000..e8500a4c9
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board.mk
@@ -0,0 +1,15 @@
+CFLAGS += -DCPU_MIMXRT1176DVMAA_cm7
+MCU_VARIANT = MIMXRT1176
+MCU_CORE = _cm7
+
+# For flash-jlink target
+JLINK_DEVICE = MIMXRT1176xxxA_M7
+
+# For flash-pyocd target
+PYOCD_TARGET = mimxrt1170_cm7
+
+BOARD_TUD_RHPORT = 0
+BOARD_TUH_RHPORT = 1
+
+# flash using pyocd
+flash: flash-pyocd
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c
new file mode 100644
index 000000000..88b3b3770
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.c
@@ -0,0 +1,879 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetRootClock() to configure corresponding module clock source and divider.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v12.0
+processor: MIMXRT1176xxxxx
+package_id: MIMXRT1176DVMAA
+mcu_data: ksdk2_0
+processor_version: 14.0.1
+board: MIMXRT1170-EVKB
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+#include "fsl_dcdc.h"
+#include "fsl_pmu.h"
+#include "fsl_clock.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+/* This function should not run from SDRAM since it will change SEMC configuration. */
+AT_QUICKACCESS_SECTION_CODE(void UpdateSemcClock(void));
+void UpdateSemcClock(void)
+{
+    /* Enable self-refresh mode and update semc clock root to 200MHz. */
+    SEMC->IPCMD = 0xA55A000D;
+    while ((SEMC->INTR & 0x3) == 0)
+        ;
+    SEMC->INTR                                = 0x3;
+    SEMC->DCCR                                = 0x0B;
+    /*
+    * Currently we are using SEMC parameter which fit both 166MHz and 200MHz, only
+    * need to change the SEMC clock root here. If customer is using their own DCD and
+    * want to switch from 166MHz to 200MHz, extra SEMC configuration might need to be
+    * adjusted here to fine tune the SDRAM performance
+    */
+    CCM->CLOCK_ROOT[kCLOCK_Root_Semc].CONTROL = 0x602;
+}
+#endif
+#endif
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: ACMP_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ADC1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ADC2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ARM_PLL_CLK.outFreq, value: 996 MHz}
+- {id: ASRC_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: AXI_CLK_ROOT.outFreq, value: 996 MHz}
+- {id: BUS_CLK_ROOT.outFreq, value: 240 MHz}
+- {id: BUS_LPSR_CLK_ROOT.outFreq, value: 160 MHz}
+- {id: CAN1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CAN2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CAN3_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CCM_CLKO1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CCM_CLKO2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CSI2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CSI2_ESC_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CSI2_UI_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CSSYS_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: CSTRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: ELCDIF_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: EMV1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: EMV2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ENET1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ENET2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ENET_1G_TX_CLK.outFreq, value: 24 MHz}
+- {id: ENET_25M_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ENET_QOS_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ENET_TIMER1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ENET_TIMER2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: ENET_TIMER3_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: FLEXSPI1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: GC355_CLK_ROOT.outFreq, value: 492.0000125 MHz}
+- {id: GPT1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 24 MHz}
+- {id: GPT2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 24 MHz}
+- {id: GPT3_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: GPT3_ipg_clk_highfreq.outFreq, value: 24 MHz}
+- {id: GPT4_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: GPT4_ipg_clk_highfreq.outFreq, value: 24 MHz}
+- {id: GPT5_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: GPT5_ipg_clk_highfreq.outFreq, value: 24 MHz}
+- {id: GPT6_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: GPT6_ipg_clk_highfreq.outFreq, value: 24 MHz}
+- {id: LCDIFV2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPI2C1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPI2C2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPI2C3_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPI2C4_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPI2C5_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPI2C6_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPSPI1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPSPI2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPSPI3_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPSPI4_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPSPI5_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPSPI6_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART10_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART11_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART12_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART3_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART4_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART5_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART6_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART7_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART8_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: LPUART9_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: M4_CLK_ROOT.outFreq, value: 4320/11 MHz}
+- {id: M4_SYSTICK_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: M7_CLK_ROOT.outFreq, value: 996 MHz}
+- {id: M7_SYSTICK_CLK_ROOT.outFreq, value: 100 kHz}
+- {id: MIC_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: MIPI_DSI_TX_CLK_ESC_ROOT.outFreq, value: 24 MHz}
+- {id: MIPI_ESC_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: MIPI_REF_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: MQS_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: MQS_MCLK.outFreq, value: 24 MHz}
+- {id: OSC_24M.outFreq, value: 24 MHz}
+- {id: OSC_32K.outFreq, value: 32.768 kHz}
+- {id: OSC_RC_16M.outFreq, value: 16 MHz}
+- {id: OSC_RC_400M.outFreq, value: 400 MHz}
+- {id: OSC_RC_48M.outFreq, value: 48 MHz}
+- {id: OSC_RC_48M_DIV2.outFreq, value: 24 MHz}
+- {id: PLL_VIDEO_CLK.outFreq, value: 984.000025 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 24 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 24 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 24 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 24 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 24 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 24 MHz}
+- {id: SAI4_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: SAI4_MCLK1.outFreq, value: 24 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: SPDIF_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: SYS_PLL2_CLK.outFreq, value: 528 MHz}
+- {id: SYS_PLL2_PFD0_CLK.outFreq, value: 352 MHz}
+- {id: SYS_PLL2_PFD1_CLK.outFreq, value: 594 MHz}
+- {id: SYS_PLL2_PFD2_CLK.outFreq, value: 396 MHz}
+- {id: SYS_PLL2_PFD3_CLK.outFreq, value: 297 MHz}
+- {id: SYS_PLL3_CLK.outFreq, value: 480 MHz}
+- {id: SYS_PLL3_DIV2_CLK.outFreq, value: 240 MHz}
+- {id: SYS_PLL3_PFD0_CLK.outFreq, value: 8640/13 MHz}
+- {id: SYS_PLL3_PFD1_CLK.outFreq, value: 8640/17 MHz}
+- {id: SYS_PLL3_PFD2_CLK.outFreq, value: 270 MHz}
+- {id: SYS_PLL3_PFD3_CLK.outFreq, value: 4320/11 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 24 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 24 MHz}
+settings:
+- {id: CoreBusClockRootsInitializationConfig, value: selectedCore}
+- {id: SOCDomainVoltage, value: OD}
+- {id: ANADIG_OSC_OSC_24M_CTRL_LP_EN_CFG, value: Low}
+- {id: ANADIG_OSC_OSC_24M_CTRL_OSC_EN_CFG, value: Enabled}
+- {id: ANADIG_PLL.PLL_AUDIO_BYPASS.sel, value: ANADIG_OSC.OSC_24M}
+- {id: ANADIG_PLL.PLL_VIDEO.denom, value: '960000'}
+- {id: ANADIG_PLL.PLL_VIDEO.div, value: '41'}
+- {id: ANADIG_PLL.PLL_VIDEO.num, value: '1'}
+- {id: ANADIG_PLL.SYS_PLL1_BYPASS.sel, value: ANADIG_OSC.OSC_24M}
+- {id: ANADIG_PLL.SYS_PLL2.denom, value: '268435455'}
+- {id: ANADIG_PLL.SYS_PLL2.div, value: '22'}
+- {id: ANADIG_PLL.SYS_PLL2.num, value: '0'}
+- {id: ANADIG_PLL.SYS_PLL2_SS_DIV.scale, value: '268435455'}
+- {id: ANADIG_PLL.SYS_PLL3_PFD3_DIV.scale, value: '22', locked: true}
+- {id: ANADIG_PLL.SYS_PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: ANADIG_PLL_ARM_PLL_CTRL_POWERUP_CFG, value: Enabled}
+- {id: ANADIG_PLL_PLL_AUDIO_CTRL_GATE_CFG, value: Disabled}
+- {id: ANADIG_PLL_PLL_VIDEO_CTRL0_POWERUP_CFG, value: Enabled}
+- {id: ANADIG_PLL_SYS_PLL1_CTRL0_POWERUP_CFG, value: Disabled}
+- {id: ANADIG_PLL_SYS_PLL1_CTRL_GATE_CFG, value: Disabled}
+- {id: ANADIG_PLL_SYS_PLL2_CTRL_POWERUP_CFG, value: Enabled}
+- {id: ANADIG_PLL_SYS_PLL3_CTRL_POWERUP_CFG, value: Enabled}
+- {id: ANADIG_PLL_SYS_PLL3_CTRL_SYS_PLL3_DIV2_CFG, value: Enabled}
+- {id: CCM.CLOCK_ROOT0.MUX.sel, value: ANADIG_PLL.ARM_PLL_CLK}
+- {id: CCM.CLOCK_ROOT1.MUX.sel, value: ANADIG_PLL.SYS_PLL3_PFD3_CLK}
+- {id: CCM.CLOCK_ROOT2.DIV.scale, value: '2'}
+- {id: CCM.CLOCK_ROOT2.MUX.sel, value: ANADIG_PLL.SYS_PLL3_CLK}
+- {id: CCM.CLOCK_ROOT25.DIV.scale, value: '22'}
+- {id: CCM.CLOCK_ROOT25.MUX.sel, value: ANADIG_PLL.SYS_PLL2_CLK}
+- {id: CCM.CLOCK_ROOT26.DIV.scale, value: '22'}
+- {id: CCM.CLOCK_ROOT26.MUX.sel, value: ANADIG_PLL.SYS_PLL2_CLK}
+- {id: CCM.CLOCK_ROOT3.DIV.scale, value: '3'}
+- {id: CCM.CLOCK_ROOT3.MUX.sel, value: ANADIG_PLL.SYS_PLL3_CLK}
+- {id: CCM.CLOCK_ROOT4.DIV.scale, value: '3'}
+- {id: CCM.CLOCK_ROOT4.MUX.sel, value: ANADIG_PLL.SYS_PLL2_PFD1_CLK}
+- {id: CCM.CLOCK_ROOT6.DIV.scale, value: '4'}
+- {id: CCM.CLOCK_ROOT6.MUX.sel, value: ANADIG_PLL.SYS_PLL2_CLK}
+- {id: CCM.CLOCK_ROOT68.DIV.scale, value: '2'}
+- {id: CCM.CLOCK_ROOT68.MUX.sel, value: ANADIG_PLL.PLL_VIDEO_CLK}
+- {id: CCM.CLOCK_ROOT8.DIV.scale, value: '240'}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+
+#ifndef SKIP_POWER_ADJUSTMENT
+#if __CORTEX_M == 7
+#define BYPASS_LDO_LPSR 1
+#define SKIP_LDO_ADJUSTMENT 1
+#elif __CORTEX_M == 4
+#define SKIP_DCDC_ADJUSTMENT 1
+#define SKIP_FBB_ENABLE 1
+#endif
+#endif
+
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .postDivider = kCLOCK_PllPostDiv2,        /* Post divider, 0 - DIV by 2, 1 - DIV by 4, 2 - DIV by 8, 3 - DIV by 1 */
+        .loopDivider = 166,                       /* PLL Loop divider, Fout = Fin * ( loopDivider / ( 2 * postDivider ) ) */
+    };
+
+const clock_sys_pll2_config_t sysPll2Config_BOARD_BootClockRUN =
+    {
+        .mfd = 268435455,                         /* Denominator of spread spectrum */
+        .ss = NULL,                               /* Spread spectrum parameter */
+        .ssEnable = false,                        /* Enable spread spectrum or not */
+    };
+
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 41,                        /* PLL Loop divider, valid range for DIV_SELECT divider value: 27 ~ 54. */
+        .postDivider = 0,                         /* Divider after PLL, should only be 1, 2, 4, 8, 16, 32 */
+        .numerator = 1,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 960000,                    /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .ss = NULL,                               /* Spread spectrum parameter */
+        .ssEnable = false,                        /* Enable spread spectrum or not */
+    };
+
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    clock_root_config_t rootCfg = {0};
+
+#if !defined(SKIP_DCDC_CONFIGURATION) || (!SKIP_DCDC_CONFIGURATION)
+    /* Set DCDC to DCM mode to improve the efficiency for light loading in run mode and transient performance with a big loading step. */
+    DCDC_BootIntoDCM(DCDC);
+
+#if !defined(SKIP_DCDC_ADJUSTMENT) || (!SKIP_DCDC_ADJUSTMENT)
+    if((OCOTP->FUSEN[16].FUSE == 0x57AC5969U) && ((OCOTP->FUSEN[17].FUSE & 0xFFU) == 0x0BU))
+    {
+        DCDC_SetVDD1P0BuckModeTargetVoltage(DCDC, kDCDC_1P0BuckTarget1P15V);
+    }
+    else
+    {
+        /* Set 1.125V for production samples to align with data sheet requirement */
+        DCDC_SetVDD1P0BuckModeTargetVoltage(DCDC, kDCDC_1P0BuckTarget1P125V);
+    }
+#endif /* SKIP_DCDC_ADJUSTMENT */
+#endif /* SKIP_DCDC_CONFIGURATION */
+
+#if !defined(SKIP_FBB_ENABLE) || (!SKIP_FBB_ENABLE)
+    /* Check if FBB need to be enabled in OverDrive(OD) mode */
+    if(((OCOTP->FUSEN[7].FUSE & 0x10U) >> 4U) != 1)
+    {
+        PMU_EnableBodyBias(ANADIG_PMU, kPMU_FBB_CM7, true);
+    }
+    else
+    {
+        PMU_EnableBodyBias(ANADIG_PMU, kPMU_FBB_CM7, false);
+    }
+#endif
+
+#if defined(BYPASS_LDO_LPSR) && BYPASS_LDO_LPSR
+    PMU_StaticEnableLpsrAnaLdoBypassMode(ANADIG_LDO_SNVS, true);
+    PMU_StaticEnableLpsrDigLdoBypassMode(ANADIG_LDO_SNVS, true);
+#endif
+
+#if !defined(SKIP_LDO_ADJUSTMENT) || (!SKIP_LDO_ADJUSTMENT)
+    pmu_static_lpsr_ana_ldo_config_t lpsrAnaConfig;
+    pmu_static_lpsr_dig_config_t lpsrDigConfig;
+
+    if((ANADIG_LDO_SNVS->PMU_LDO_LPSR_ANA & ANADIG_LDO_SNVS_PMU_LDO_LPSR_ANA_BYPASS_MODE_EN_MASK) == 0UL)
+    {
+        PMU_StaticGetLpsrAnaLdoDefaultConfig(&lpsrAnaConfig);
+        PMU_StaticLpsrAnaLdoInit(ANADIG_LDO_SNVS, &lpsrAnaConfig);
+    }
+
+    if((ANADIG_LDO_SNVS->PMU_LDO_LPSR_DIG & ANADIG_LDO_SNVS_PMU_LDO_LPSR_DIG_BYPASS_MODE_MASK) == 0UL)
+    {
+        PMU_StaticGetLpsrDigLdoDefaultConfig(&lpsrDigConfig);
+        lpsrDigConfig.targetVoltage = kPMU_LpsrDigTargetStableVoltage1P117V;
+        PMU_StaticLpsrDigLdoInit(ANADIG_LDO_SNVS, &lpsrDigConfig);
+    }
+#endif
+
+    /* Config CLK_1M */
+    CLOCK_OSC_Set1MHzOutputBehavior(kCLOCK_1MHzOutEnableFreeRunning1Mhz);
+
+    /* Init OSC RC 16M */
+    ANADIG_OSC->OSC_16M_CTRL |= ANADIG_OSC_OSC_16M_CTRL_EN_IRC4M16M_MASK;
+
+    /* Init OSC RC 400M */
+    CLOCK_OSC_EnableOscRc400M();
+    CLOCK_OSC_GateOscRc400M(false);
+
+    /* Init OSC RC 48M */
+    CLOCK_OSC_EnableOsc48M(true);
+    CLOCK_OSC_EnableOsc48MDiv2(true);
+
+    /* Config OSC 24M */
+    ANADIG_OSC->OSC_24M_CTRL |= ANADIG_OSC_OSC_24M_CTRL_OSC_EN(1) | ANADIG_OSC_OSC_24M_CTRL_BYPASS_EN(0) | ANADIG_OSC_OSC_24M_CTRL_BYPASS_CLK(0) | ANADIG_OSC_OSC_24M_CTRL_LP_EN(1) | ANADIG_OSC_OSC_24M_CTRL_OSC_24M_GATE(0);
+    /* Wait for 24M OSC to be stable. */
+    while (ANADIG_OSC_OSC_24M_CTRL_OSC_24M_STABLE_MASK !=
+            (ANADIG_OSC->OSC_24M_CTRL & ANADIG_OSC_OSC_24M_CTRL_OSC_24M_STABLE_MASK))
+    {
+    }
+
+    /* Switch both core, M7 Systick and Bus_Lpsr to OscRC48MDiv2 first */
+#if __CORTEX_M == 7
+    rootCfg.mux = kCLOCK_M7_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_M7, &rootCfg);
+
+    rootCfg.mux = kCLOCK_M7_SYSTICK_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_M7_Systick, &rootCfg);
+#endif
+
+#if __CORTEX_M == 4
+    rootCfg.mux = kCLOCK_M4_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_M4, &rootCfg);
+
+    rootCfg.mux = kCLOCK_BUS_LPSR_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Bus_Lpsr, &rootCfg);
+#endif
+
+    /*
+    * if DCD is used, please make sure the clock source of SEMC is not changed in the following PLL/PFD configuration code.
+    */
+    /* Init Arm Pll. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+
+    /* Bypass Sys Pll1. */
+    CLOCK_SetPllBypass(kCLOCK_PllSys1, true);
+
+    /* DeInit Sys Pll1. */
+    CLOCK_DeinitSysPll1();
+
+    /* Init Sys Pll2. */
+    CLOCK_InitSysPll2(&sysPll2Config_BOARD_BootClockRUN);
+
+    /* Init System Pll2 pfd0. */
+    CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd0, 27);
+
+    /* Init System Pll2 pfd1. */
+    CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd1, 16);
+
+    /* Init System Pll2 pfd2. */
+    CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd2, 24);
+
+    /* Init System Pll2 pfd3. */
+    CLOCK_InitPfd(kCLOCK_PllSys2, kCLOCK_Pfd3, 32);
+
+    /* Init Sys Pll3. */
+    CLOCK_InitSysPll3();
+
+    /* Init System Pll3 pfd0. */
+    CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd0, 13);
+
+    /* Init System Pll3 pfd1. */
+    CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd1, 17);
+
+    /* Init System Pll3 pfd2. */
+    CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd2, 32);
+
+    /* Init System Pll3 pfd3. */
+    CLOCK_InitPfd(kCLOCK_PllSys3, kCLOCK_Pfd3, 22);
+
+    /* Bypass Audio Pll. */
+    CLOCK_SetPllBypass(kCLOCK_PllAudio, true);
+
+    /* DeInit Audio Pll. */
+    CLOCK_DeinitAudioPll();
+
+    /* Init Video Pll. */
+    CLOCK_InitVideoPll(&videoPllConfig_BOARD_BootClockRUN);
+
+    /* Module clock root configurations. */
+    /* Configure M7 using ARM_PLL_CLK */
+#if __CORTEX_M == 7
+    rootCfg.mux = kCLOCK_M7_ClockRoot_MuxArmPllOut;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_M7, &rootCfg);
+#endif
+
+    /* Configure M4 using SYS_PLL3_PFD3_CLK */
+#if __CORTEX_M == 4
+    rootCfg.mux = kCLOCK_M4_ClockRoot_MuxSysPll3Pfd3;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_M4, &rootCfg);
+#endif
+
+    /* Configure BUS using SYS_PLL3_CLK */
+    rootCfg.mux = kCLOCK_BUS_ClockRoot_MuxSysPll3Out;
+    rootCfg.div = 2;
+    CLOCK_SetRootClock(kCLOCK_Root_Bus, &rootCfg);
+
+    /* Configure BUS_LPSR using SYS_PLL3_CLK */
+    rootCfg.mux = kCLOCK_BUS_LPSR_ClockRoot_MuxSysPll3Out;
+    rootCfg.div = 3;
+    CLOCK_SetRootClock(kCLOCK_Root_Bus_Lpsr, &rootCfg);
+
+    /* Configure SEMC using SYS_PLL2_PFD1_CLK */
+#ifndef SKIP_SEMC_INIT
+    rootCfg.mux = kCLOCK_SEMC_ClockRoot_MuxSysPll2Pfd1;
+    rootCfg.div = 3;
+    CLOCK_SetRootClock(kCLOCK_Root_Semc, &rootCfg);
+#endif
+
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    UpdateSemcClock();
+#endif
+#endif
+
+    /* Configure CSSYS using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CSSYS_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Cssys, &rootCfg);
+
+    /* Configure CSTRACE using SYS_PLL2_CLK */
+    rootCfg.mux = kCLOCK_CSTRACE_ClockRoot_MuxSysPll2Out;
+    rootCfg.div = 4;
+    CLOCK_SetRootClock(kCLOCK_Root_Cstrace, &rootCfg);
+
+    /* Configure M4_SYSTICK using OSC_RC_48M_DIV2 */
+#if __CORTEX_M == 4
+    rootCfg.mux = kCLOCK_M4_SYSTICK_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_M4_Systick, &rootCfg);
+#endif
+
+    /* Configure M7_SYSTICK using OSC_RC_48M_DIV2 */
+#if __CORTEX_M == 7
+    rootCfg.mux = kCLOCK_M7_SYSTICK_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 240;
+    CLOCK_SetRootClock(kCLOCK_Root_M7_Systick, &rootCfg);
+#endif
+
+    /* Configure ADC1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ADC1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Adc1, &rootCfg);
+
+    /* Configure ADC2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ADC2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Adc2, &rootCfg);
+
+    /* Configure ACMP using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ACMP_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Acmp, &rootCfg);
+
+    /* Configure FLEXIO1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_FLEXIO1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Flexio1, &rootCfg);
+
+    /* Configure FLEXIO2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_FLEXIO2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Flexio2, &rootCfg);
+
+    /* Configure GPT1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_GPT1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Gpt1, &rootCfg);
+
+    /* Configure GPT2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_GPT2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Gpt2, &rootCfg);
+
+    /* Configure GPT3 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_GPT3_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Gpt3, &rootCfg);
+
+    /* Configure GPT4 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_GPT4_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Gpt4, &rootCfg);
+
+    /* Configure GPT5 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_GPT5_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Gpt5, &rootCfg);
+
+    /* Configure GPT6 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_GPT6_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Gpt6, &rootCfg);
+
+    /* Configure FLEXSPI1 using OSC_RC_48M_DIV2 */
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1) || defined(FLEXSPI_IN_USE))
+    rootCfg.mux = kCLOCK_FLEXSPI1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Flexspi1, &rootCfg);
+#endif
+
+    /* Configure FLEXSPI2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_FLEXSPI2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Flexspi2, &rootCfg);
+
+    /* Configure CAN1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CAN1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Can1, &rootCfg);
+
+    /* Configure CAN2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CAN2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Can2, &rootCfg);
+
+    /* Configure CAN3 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CAN3_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Can3, &rootCfg);
+
+    /* Configure LPUART1 using SYS_PLL2_CLK */
+    rootCfg.mux = kCLOCK_LPUART1_ClockRoot_MuxSysPll2Out;
+    rootCfg.div = 22;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart1, &rootCfg);
+
+    /* Configure LPUART2 using SYS_PLL2_CLK */
+    rootCfg.mux = kCLOCK_LPUART2_ClockRoot_MuxSysPll2Out;
+    rootCfg.div = 22;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart2, &rootCfg);
+
+    /* Configure LPUART3 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART3_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart3, &rootCfg);
+
+    /* Configure LPUART4 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART4_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart4, &rootCfg);
+
+    /* Configure LPUART5 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART5_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart5, &rootCfg);
+
+    /* Configure LPUART6 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART6_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart6, &rootCfg);
+
+    /* Configure LPUART7 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART7_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart7, &rootCfg);
+
+    /* Configure LPUART8 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART8_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart8, &rootCfg);
+
+    /* Configure LPUART9 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART9_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart9, &rootCfg);
+
+    /* Configure LPUART10 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART10_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart10, &rootCfg);
+
+    /* Configure LPUART11 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART11_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart11, &rootCfg);
+
+    /* Configure LPUART12 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPUART12_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpuart12, &rootCfg);
+
+    /* Configure LPI2C1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPI2C1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpi2c1, &rootCfg);
+
+    /* Configure LPI2C2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPI2C2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpi2c2, &rootCfg);
+
+    /* Configure LPI2C3 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPI2C3_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpi2c3, &rootCfg);
+
+    /* Configure LPI2C4 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPI2C4_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpi2c4, &rootCfg);
+
+    /* Configure LPI2C5 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPI2C5_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpi2c5, &rootCfg);
+
+    /* Configure LPI2C6 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPI2C6_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpi2c6, &rootCfg);
+
+    /* Configure LPSPI1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPSPI1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpspi1, &rootCfg);
+
+    /* Configure LPSPI2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPSPI2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpspi2, &rootCfg);
+
+    /* Configure LPSPI3 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPSPI3_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpspi3, &rootCfg);
+
+    /* Configure LPSPI4 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPSPI4_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpspi4, &rootCfg);
+
+    /* Configure LPSPI5 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPSPI5_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpspi5, &rootCfg);
+
+    /* Configure LPSPI6 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LPSPI6_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lpspi6, &rootCfg);
+
+    /* Configure EMV1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_EMV1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Emv1, &rootCfg);
+
+    /* Configure EMV2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_EMV2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Emv2, &rootCfg);
+
+    /* Configure ENET1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ENET1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Enet1, &rootCfg);
+
+    /* Configure ENET2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ENET2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Enet2, &rootCfg);
+
+    /* Configure ENET_QOS using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ENET_QOS_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Enet_Qos, &rootCfg);
+
+    /* Configure ENET_25M using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ENET_25M_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Enet_25m, &rootCfg);
+
+    /* Configure ENET_TIMER1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ENET_TIMER1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Enet_Timer1, &rootCfg);
+
+    /* Configure ENET_TIMER2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ENET_TIMER2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Enet_Timer2, &rootCfg);
+
+    /* Configure ENET_TIMER3 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ENET_TIMER3_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Enet_Timer3, &rootCfg);
+
+    /* Configure USDHC1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_USDHC1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Usdhc1, &rootCfg);
+
+    /* Configure USDHC2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_USDHC2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Usdhc2, &rootCfg);
+
+    /* Configure ASRC using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_ASRC_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Asrc, &rootCfg);
+
+    /* Configure MQS using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_MQS_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Mqs, &rootCfg);
+
+    /* Configure MIC using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_MIC_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Mic, &rootCfg);
+
+    /* Configure SPDIF using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_SPDIF_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Spdif, &rootCfg);
+
+    /* Configure SAI1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_SAI1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Sai1, &rootCfg);
+
+    /* Configure SAI2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_SAI2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Sai2, &rootCfg);
+
+    /* Configure SAI3 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_SAI3_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Sai3, &rootCfg);
+
+    /* Configure SAI4 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_SAI4_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Sai4, &rootCfg);
+
+    /* Configure GC355 using PLL_VIDEO_CLK */
+    rootCfg.mux = kCLOCK_GC355_ClockRoot_MuxVideoPllOut;
+    rootCfg.div = 2;
+    CLOCK_SetRootClock(kCLOCK_Root_Gc355, &rootCfg);
+
+    /* Configure LCDIF using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LCDIF_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lcdif, &rootCfg);
+
+    /* Configure LCDIFV2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_LCDIFV2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Lcdifv2, &rootCfg);
+
+    /* Configure MIPI_REF using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_MIPI_REF_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Mipi_Ref, &rootCfg);
+
+    /* Configure MIPI_ESC using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_MIPI_ESC_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Mipi_Esc, &rootCfg);
+
+    /* Configure CSI2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CSI2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Csi2, &rootCfg);
+
+    /* Configure CSI2_ESC using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CSI2_ESC_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Csi2_Esc, &rootCfg);
+
+    /* Configure CSI2_UI using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CSI2_UI_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Csi2_Ui, &rootCfg);
+
+    /* Configure CSI using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CSI_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Csi, &rootCfg);
+
+    /* Configure CKO1 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CKO1_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Cko1, &rootCfg);
+
+    /* Configure CKO2 using OSC_RC_48M_DIV2 */
+    rootCfg.mux = kCLOCK_CKO2_ClockRoot_MuxOscRc48MDiv2;
+    rootCfg.div = 1;
+    CLOCK_SetRootClock(kCLOCK_Root_Cko2, &rootCfg);
+
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 3);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR4 &= ~IOMUXC_GPR_GPR4_ENET_REF_CLK_DIR_MASK;
+    /* Set ENET_1G Tx clock source. */
+    IOMUXC_GPR->GPR5 = ((IOMUXC_GPR->GPR5 & ~IOMUXC_GPR_GPR5_ENET1G_TX_CLK_SEL_MASK) | IOMUXC_GPR_GPR5_ENET1G_RGMII_EN_MASK);
+    /* Set ENET_1G Ref clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_ENET1G_REF_CLK_DIR_MASK;
+    /* Set ENET_QOS Tx clock source. */
+    IOMUXC_GPR->GPR6 &= ~IOMUXC_GPR_GPR6_ENET_QOS_RGMII_EN_MASK;
+    /* Set ENET_QOS Ref clock source. */
+    IOMUXC_GPR->GPR6 &= ~IOMUXC_GPR_GPR6_ENET_QOS_REF_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR22 &= ~IOMUXC_GPR_GPR22_REF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR23 &= ~IOMUXC_GPR_GPR23_REF_1M_CLK_GPT2_MASK;
+    /* Set GPT3 High frequency reference clock source. */
+    IOMUXC_GPR->GPR24 &= ~IOMUXC_GPR_GPR24_REF_1M_CLK_GPT3_MASK;
+    /* Set GPT4 High frequency reference clock source. */
+    IOMUXC_GPR->GPR25 &= ~IOMUXC_GPR_GPR25_REF_1M_CLK_GPT4_MASK;
+    /* Set GPT5 High frequency reference clock source. */
+    IOMUXC_GPR->GPR26 &= ~IOMUXC_GPR_GPR26_REF_1M_CLK_GPT5_MASK;
+    /* Set GPT6 High frequency reference clock source. */
+    IOMUXC_GPR->GPR27 &= ~IOMUXC_GPR_GPR27_REF_1M_CLK_GPT6_MASK;
+
+#if __CORTEX_M == 7
+    SystemCoreClock = CLOCK_GetRootClockFreq(kCLOCK_Root_M7);
+#else
+    SystemCoreClock = CLOCK_GetRootClockFreq(kCLOCK_Root_M4);
+#endif
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h
new file mode 100644
index 000000000..4a4d35eaa
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/clock_config.h
@@ -0,0 +1,202 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+#define BOARD_XTAL0_CLK_HZ 24000000U /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ 32768U  /*!< Board xtal32k frequency in Hz */
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if __CORTEX_M == 7
+    #define BOARD_BOOTCLOCKRUN_CORE_CLOCK 996000000UL /*!< CM7 Core clock frequency: 996000000Hz */
+#else
+    #define BOARD_BOOTCLOCKRUN_CORE_CLOCK 392727272UL /*!< CM4 Core clock frequency: 392727272Hz */
+#endif
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_ACMP_CLK_ROOT              24000000UL     /* Clock consumers of ACMP_CLK_ROOT output : CMP1, CMP2, CMP3, CMP4 */
+#define BOARD_BOOTCLOCKRUN_ADC1_CLK_ROOT              24000000UL     /* Clock consumers of ADC1_CLK_ROOT output : LPADC1 */
+#define BOARD_BOOTCLOCKRUN_ADC2_CLK_ROOT              24000000UL     /* Clock consumers of ADC2_CLK_ROOT output : LPADC2 */
+#define BOARD_BOOTCLOCKRUN_ARM_PLL_CLK                996000000UL    /* Clock consumers of ARM_PLL_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_ASRC_CLK_ROOT              24000000UL     /* Clock consumers of ASRC_CLK_ROOT output : ASRC */
+#define BOARD_BOOTCLOCKRUN_AXI_CLK_ROOT               996000000UL    /* Clock consumers of AXI_CLK_ROOT output : FLEXRAM */
+#define BOARD_BOOTCLOCKRUN_BUS_CLK_ROOT               240000000UL    /* Clock consumers of BUS_CLK_ROOT output : ADC_ETC, AOI1, AOI2, CAAM, CAN1, CAN2, CM7_GPIO2, CM7_GPIO3, CMP1, CMP2, CMP3, CMP4, CSI, DAC, DMA0, DMAMUX0, DSI_HOST, EMVSIM1, EMVSIM2, ENC1, ENC2, ENC3, ENC4, ENET, ENET_1G, ENET_QOS, EWM, FLEXIO1, FLEXIO2, FLEXSPI1, FLEXSPI2, GPIO1, GPIO2, GPIO3, GPIO4, GPIO5, GPIO6, IEE_APC, IOMUXC, IOMUXC_GPR, KPP, LCDIF, LCDIFV2, LPADC1, LPADC2, LPI2C1, LPI2C2, LPI2C3, LPI2C4, LPSPI1, LPSPI2, LPSPI3, LPSPI4, LPUART1, LPUART10, LPUART2, LPUART3, LPUART4, LPUART5, LPUART6, LPUART7, LPUART8, LPUART9, MECC1, MECC2, MIPI_CSI2RX, PIT1, PWM1, PWM2, PWM3, PWM4, PXP, RTWDOG3, SAI1, SAI2, SAI3, SPDIF, TMR1, TMR2, TMR3, TMR4, USBPHY1, USBPHY2, USB_OTG1, USB_OTG2, USDHC1, USDHC2, WDOG1, WDOG2, XBARA1, XBARB2, XBARB3, XECC_FLEXSPI1, XECC_FLEXSPI2, XECC_SEMC, XRDC2_D0, XRDC2_D1 */
+#define BOARD_BOOTCLOCKRUN_BUS_LPSR_CLK_ROOT          160000000UL    /* Clock consumers of BUS_LPSR_CLK_ROOT output : CAN3, GPIO10, GPIO11, GPIO12, GPIO7, GPIO8, GPIO9, IOMUXC_LPSR, LPI2C5, LPI2C6, LPSPI5, LPSPI6, LPUART11, LPUART12, MUA, MUB, PDM, PIT2, RDC, RTWDOG4, SAI4, SNVS, XRDC2_D0, XRDC2_D1 */
+#define BOARD_BOOTCLOCKRUN_CAN1_CLK_ROOT              24000000UL     /* Clock consumers of CAN1_CLK_ROOT output : CAN1 */
+#define BOARD_BOOTCLOCKRUN_CAN2_CLK_ROOT              24000000UL     /* Clock consumers of CAN2_CLK_ROOT output : CAN2 */
+#define BOARD_BOOTCLOCKRUN_CAN3_CLK_ROOT              24000000UL     /* Clock consumers of CAN3_CLK_ROOT output : CAN3 */
+#define BOARD_BOOTCLOCKRUN_CCM_CLKO1_CLK_ROOT         24000000UL     /* Clock consumers of CCM_CLKO1_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_CCM_CLKO2_CLK_ROOT         24000000UL     /* Clock consumers of CCM_CLKO2_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL      /* Clock consumers of CLK_1M output : EWM, RTWDOG3, RTWDOG4 */
+#define BOARD_BOOTCLOCKRUN_CSI2_CLK_ROOT              24000000UL     /* Clock consumers of CSI2_CLK_ROOT output : MIPI_CSI2RX */
+#define BOARD_BOOTCLOCKRUN_CSI2_ESC_CLK_ROOT          24000000UL     /* Clock consumers of CSI2_ESC_CLK_ROOT output : MIPI_CSI2RX */
+#define BOARD_BOOTCLOCKRUN_CSI2_UI_CLK_ROOT           24000000UL     /* Clock consumers of CSI2_UI_CLK_ROOT output : MIPI_CSI2RX */
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               24000000UL     /* Clock consumers of CSI_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_CSSYS_CLK_ROOT             24000000UL     /* Clock consumers of CSSYS_CLK_ROOT output : ARM */
+#define BOARD_BOOTCLOCKRUN_CSTRACE_CLK_ROOT           132000000UL    /* Clock consumers of CSTRACE_CLK_ROOT output : ARM */
+#define BOARD_BOOTCLOCKRUN_ELCDIF_CLK_ROOT            24000000UL     /* Clock consumers of ELCDIF_CLK_ROOT output : LCDIF */
+#define BOARD_BOOTCLOCKRUN_EMV1_CLK_ROOT              24000000UL     /* Clock consumers of EMV1_CLK_ROOT output : EMVSIM1 */
+#define BOARD_BOOTCLOCKRUN_EMV2_CLK_ROOT              24000000UL     /* Clock consumers of EMV2_CLK_ROOT output : EMVSIM2 */
+#define BOARD_BOOTCLOCKRUN_ENET1_CLK_ROOT             24000000UL     /* Clock consumers of ENET1_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_ENET2_CLK_ROOT             24000000UL     /* Clock consumers of ENET2_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_ENET_1G_REF_CLK            0UL            /* Clock consumers of ENET_1G_REF_CLK output : ENET_1G */
+#define BOARD_BOOTCLOCKRUN_ENET_1G_TX_CLK             24000000UL     /* Clock consumers of ENET_1G_TX_CLK output : ENET_1G */
+#define BOARD_BOOTCLOCKRUN_ENET_25M_CLK_ROOT          24000000UL     /* Clock consumers of ENET_25M_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_ENET_QOS_CLK_ROOT          24000000UL     /* Clock consumers of ENET_QOS_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_ENET_QOS_REF_CLK           0UL            /* Clock consumers of ENET_QOS_REF_CLK output : ENET_QOS */
+#define BOARD_BOOTCLOCKRUN_ENET_QOS_TX_CLK            0UL            /* Clock consumers of ENET_QOS_TX_CLK output : ENET_QOS */
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL            /* Clock consumers of ENET_REF_CLK output : ENET */
+#define BOARD_BOOTCLOCKRUN_ENET_TIMER1_CLK_ROOT       24000000UL     /* Clock consumers of ENET_TIMER1_CLK_ROOT output : ENET */
+#define BOARD_BOOTCLOCKRUN_ENET_TIMER2_CLK_ROOT       24000000UL     /* Clock consumers of ENET_TIMER2_CLK_ROOT output : ENET_1G */
+#define BOARD_BOOTCLOCKRUN_ENET_TIMER3_CLK_ROOT       24000000UL     /* Clock consumers of ENET_TIMER3_CLK_ROOT output : ENET_QOS */
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL            /* Clock consumers of ENET_TX_CLK output : ENET */
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           24000000UL     /* Clock consumers of FLEXIO1_CLK_ROOT output : FLEXIO1 */
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           24000000UL     /* Clock consumers of FLEXIO2_CLK_ROOT output : FLEXIO2 */
+#define BOARD_BOOTCLOCKRUN_FLEXSPI1_CLK_ROOT          24000000UL     /* Clock consumers of FLEXSPI1_CLK_ROOT output : FLEXSPI1 */
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          24000000UL     /* Clock consumers of FLEXSPI2_CLK_ROOT output : FLEXSPI2 */
+#define BOARD_BOOTCLOCKRUN_GC355_CLK_ROOT             492000012UL    /* Clock consumers of GC355_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_GPT1_CLK_ROOT              24000000UL     /* Clock consumers of GPT1_CLK_ROOT output : GPT1 */
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      24000000UL     /* Clock consumers of GPT1_ipg_clk_highfreq output : N/A */
+#define BOARD_BOOTCLOCKRUN_GPT2_CLK_ROOT              24000000UL     /* Clock consumers of GPT2_CLK_ROOT output : GPT2 */
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      24000000UL     /* Clock consumers of GPT2_ipg_clk_highfreq output : N/A */
+#define BOARD_BOOTCLOCKRUN_GPT3_CLK_ROOT              24000000UL     /* Clock consumers of GPT3_CLK_ROOT output : GPT3 */
+#define BOARD_BOOTCLOCKRUN_GPT3_IPG_CLK_HIGHFREQ      24000000UL     /* Clock consumers of GPT3_ipg_clk_highfreq output : N/A */
+#define BOARD_BOOTCLOCKRUN_GPT4_CLK_ROOT              24000000UL     /* Clock consumers of GPT4_CLK_ROOT output : GPT4 */
+#define BOARD_BOOTCLOCKRUN_GPT4_IPG_CLK_HIGHFREQ      24000000UL     /* Clock consumers of GPT4_ipg_clk_highfreq output : N/A */
+#define BOARD_BOOTCLOCKRUN_GPT5_CLK_ROOT              24000000UL     /* Clock consumers of GPT5_CLK_ROOT output : GPT5 */
+#define BOARD_BOOTCLOCKRUN_GPT5_IPG_CLK_HIGHFREQ      24000000UL     /* Clock consumers of GPT5_ipg_clk_highfreq output : N/A */
+#define BOARD_BOOTCLOCKRUN_GPT6_CLK_ROOT              24000000UL     /* Clock consumers of GPT6_CLK_ROOT output : GPT6 */
+#define BOARD_BOOTCLOCKRUN_GPT6_IPG_CLK_HIGHFREQ      24000000UL     /* Clock consumers of GPT6_ipg_clk_highfreq output : N/A */
+#define BOARD_BOOTCLOCKRUN_LCDIFV2_CLK_ROOT           24000000UL     /* Clock consumers of LCDIFV2_CLK_ROOT output : LCDIFV2 */
+#define BOARD_BOOTCLOCKRUN_LPI2C1_CLK_ROOT            24000000UL     /* Clock consumers of LPI2C1_CLK_ROOT output : LPI2C1 */
+#define BOARD_BOOTCLOCKRUN_LPI2C2_CLK_ROOT            24000000UL     /* Clock consumers of LPI2C2_CLK_ROOT output : LPI2C2 */
+#define BOARD_BOOTCLOCKRUN_LPI2C3_CLK_ROOT            24000000UL     /* Clock consumers of LPI2C3_CLK_ROOT output : LPI2C3 */
+#define BOARD_BOOTCLOCKRUN_LPI2C4_CLK_ROOT            24000000UL     /* Clock consumers of LPI2C4_CLK_ROOT output : LPI2C4 */
+#define BOARD_BOOTCLOCKRUN_LPI2C5_CLK_ROOT            24000000UL     /* Clock consumers of LPI2C5_CLK_ROOT output : LPI2C5 */
+#define BOARD_BOOTCLOCKRUN_LPI2C6_CLK_ROOT            24000000UL     /* Clock consumers of LPI2C6_CLK_ROOT output : LPI2C6 */
+#define BOARD_BOOTCLOCKRUN_LPSPI1_CLK_ROOT            24000000UL     /* Clock consumers of LPSPI1_CLK_ROOT output : LPSPI1 */
+#define BOARD_BOOTCLOCKRUN_LPSPI2_CLK_ROOT            24000000UL     /* Clock consumers of LPSPI2_CLK_ROOT output : LPSPI2 */
+#define BOARD_BOOTCLOCKRUN_LPSPI3_CLK_ROOT            24000000UL     /* Clock consumers of LPSPI3_CLK_ROOT output : LPSPI3 */
+#define BOARD_BOOTCLOCKRUN_LPSPI4_CLK_ROOT            24000000UL     /* Clock consumers of LPSPI4_CLK_ROOT output : LPSPI4 */
+#define BOARD_BOOTCLOCKRUN_LPSPI5_CLK_ROOT            24000000UL     /* Clock consumers of LPSPI5_CLK_ROOT output : LPSPI5 */
+#define BOARD_BOOTCLOCKRUN_LPSPI6_CLK_ROOT            24000000UL     /* Clock consumers of LPSPI6_CLK_ROOT output : LPSPI6 */
+#define BOARD_BOOTCLOCKRUN_LPUART10_CLK_ROOT          24000000UL     /* Clock consumers of LPUART10_CLK_ROOT output : LPUART10 */
+#define BOARD_BOOTCLOCKRUN_LPUART11_CLK_ROOT          24000000UL     /* Clock consumers of LPUART11_CLK_ROOT output : LPUART11 */
+#define BOARD_BOOTCLOCKRUN_LPUART12_CLK_ROOT          24000000UL     /* Clock consumers of LPUART12_CLK_ROOT output : LPUART12 */
+#define BOARD_BOOTCLOCKRUN_LPUART1_CLK_ROOT           24000000UL     /* Clock consumers of LPUART1_CLK_ROOT output : LPUART1 */
+#define BOARD_BOOTCLOCKRUN_LPUART2_CLK_ROOT           24000000UL     /* Clock consumers of LPUART2_CLK_ROOT output : LPUART2 */
+#define BOARD_BOOTCLOCKRUN_LPUART3_CLK_ROOT           24000000UL     /* Clock consumers of LPUART3_CLK_ROOT output : LPUART3 */
+#define BOARD_BOOTCLOCKRUN_LPUART4_CLK_ROOT           24000000UL     /* Clock consumers of LPUART4_CLK_ROOT output : LPUART4 */
+#define BOARD_BOOTCLOCKRUN_LPUART5_CLK_ROOT           24000000UL     /* Clock consumers of LPUART5_CLK_ROOT output : LPUART5 */
+#define BOARD_BOOTCLOCKRUN_LPUART6_CLK_ROOT           24000000UL     /* Clock consumers of LPUART6_CLK_ROOT output : LPUART6 */
+#define BOARD_BOOTCLOCKRUN_LPUART7_CLK_ROOT           24000000UL     /* Clock consumers of LPUART7_CLK_ROOT output : LPUART7 */
+#define BOARD_BOOTCLOCKRUN_LPUART8_CLK_ROOT           24000000UL     /* Clock consumers of LPUART8_CLK_ROOT output : LPUART8 */
+#define BOARD_BOOTCLOCKRUN_LPUART9_CLK_ROOT           24000000UL     /* Clock consumers of LPUART9_CLK_ROOT output : LPUART9 */
+#define BOARD_BOOTCLOCKRUN_M4_CLK_ROOT                392727272UL    /* Clock consumers of M4_CLK_ROOT output : ARM, DMA1, DMAMUX1, SSARC_HP, SSARC_LP, XRDC2_D0, XRDC2_D1 */
+#define BOARD_BOOTCLOCKRUN_M4_SYSTICK_CLK_ROOT        24000000UL     /* Clock consumers of M4_SYSTICK_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_M7_CLK_ROOT                996000000UL    /* Clock consumers of M7_CLK_ROOT output : ARM */
+#define BOARD_BOOTCLOCKRUN_M7_SYSTICK_CLK_ROOT        100000UL       /* Clock consumers of M7_SYSTICK_CLK_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_MIC_CLK_ROOT               24000000UL     /* Clock consumers of MIC_CLK_ROOT output : ASRC, PDM, SPDIF */
+#define BOARD_BOOTCLOCKRUN_MIPI_DSI_TX_CLK_ESC_ROOT   24000000UL     /* Clock consumers of MIPI_DSI_TX_CLK_ESC_ROOT output : N/A */
+#define BOARD_BOOTCLOCKRUN_MIPI_ESC_CLK_ROOT          24000000UL     /* Clock consumers of MIPI_ESC_CLK_ROOT output : DSI_HOST */
+#define BOARD_BOOTCLOCKRUN_MIPI_REF_CLK_ROOT          24000000UL     /* Clock consumers of MIPI_REF_CLK_ROOT output : DSI_HOST */
+#define BOARD_BOOTCLOCKRUN_MQS_CLK_ROOT               24000000UL     /* Clock consumers of MQS_CLK_ROOT output : ASRC */
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   24000000UL     /* Clock consumers of MQS_MCLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_OSC_24M                    24000000UL     /* Clock consumers of OSC_24M output : SPDIF, TMPSNS, USBPHY1, USBPHY2 */
+#define BOARD_BOOTCLOCKRUN_OSC_32K                    32768UL        /* Clock consumers of OSC_32K output : GPIO13, RTWDOG3, RTWDOG4 */
+#define BOARD_BOOTCLOCKRUN_OSC_RC_16M                 16000000UL     /* Clock consumers of OSC_RC_16M output : CCM, DCDC, EWM, GPT1, GPT2, GPT3, GPT4, GPT5, GPT6, SSARC_LP */
+#define BOARD_BOOTCLOCKRUN_OSC_RC_400M                400000000UL    /* Clock consumers of OSC_RC_400M output : N/A */
+#define BOARD_BOOTCLOCKRUN_OSC_RC_48M                 48000000UL     /* Clock consumers of OSC_RC_48M output : N/A */
+#define BOARD_BOOTCLOCKRUN_OSC_RC_48M_DIV2            24000000UL     /* Clock consumers of OSC_RC_48M_DIV2 output : N/A */
+#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_CLK              0UL            /* Clock consumers of PLL_AUDIO_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_MODULATION    0UL            /* Clock consumers of PLL_AUDIO_SS_MODULATION output : N/A */
+#define BOARD_BOOTCLOCKRUN_PLL_AUDIO_SS_RANGE         0UL            /* Clock consumers of PLL_AUDIO_SS_RANGE output : N/A */
+#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_CLK              984000025UL    /* Clock consumers of PLL_VIDEO_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_MODULATION    0UL            /* Clock consumers of PLL_VIDEO_SS_MODULATION output : N/A */
+#define BOARD_BOOTCLOCKRUN_PLL_VIDEO_SS_RANGE         0UL            /* Clock consumers of PLL_VIDEO_SS_RANGE output : N/A */
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              24000000UL     /* Clock consumers of SAI1_CLK_ROOT output : SPDIF */
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 24000000UL     /* Clock consumers of SAI1_MCLK1 output : SAI1 */
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 0UL            /* Clock consumers of SAI1_MCLK2 output : SAI1 */
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 24000000UL     /* Clock consumers of SAI1_MCLK3 output : SAI1 */
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              24000000UL     /* Clock consumers of SAI2_CLK_ROOT output : ASRC */
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 24000000UL     /* Clock consumers of SAI2_MCLK1 output : SAI2 */
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL            /* Clock consumers of SAI2_MCLK2 output : SAI2 */
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 24000000UL     /* Clock consumers of SAI2_MCLK3 output : SAI2 */
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              24000000UL     /* Clock consumers of SAI3_CLK_ROOT output : ASRC, SPDIF */
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 24000000UL     /* Clock consumers of SAI3_MCLK1 output : SAI3 */
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL            /* Clock consumers of SAI3_MCLK2 output : SAI3 */
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 24000000UL     /* Clock consumers of SAI3_MCLK3 output : SAI3 */
+#define BOARD_BOOTCLOCKRUN_SAI4_CLK_ROOT              24000000UL     /* Clock consumers of SAI4_CLK_ROOT output : ASRC, SPDIF */
+#define BOARD_BOOTCLOCKRUN_SAI4_MCLK1                 24000000UL     /* Clock consumers of SAI4_MCLK1 output : SAI4 */
+#define BOARD_BOOTCLOCKRUN_SAI4_MCLK2                 0UL            /* Clock consumers of SAI4_MCLK2 output : SAI4 */
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              198000000UL    /* Clock consumers of SEMC_CLK_ROOT output : SEMC, XECC_FLEXSPI1, XECC_FLEXSPI2, XECC_SEMC, XRDC2_D0, XRDC2_D1 */
+#define BOARD_BOOTCLOCKRUN_SPDIF_CLK_ROOT             24000000UL     /* Clock consumers of SPDIF_CLK_ROOT output : SPDIF */
+#define BOARD_BOOTCLOCKRUN_SPDIF_EXTCLK_OUT           0UL            /* Clock consumers of SPDIF_EXTCLK_OUT output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL1_CLK               0UL            /* Clock consumers of SYS_PLL1_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV2_CLK          0UL            /* Clock consumers of SYS_PLL1_DIV2_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL1_DIV5_CLK          0UL            /* Clock consumers of SYS_PLL1_DIV5_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_MODULATION     0UL            /* Clock consumers of SYS_PLL1_SS_MODULATION output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL1_SS_RANGE          0UL            /* Clock consumers of SYS_PLL1_SS_RANGE output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL2_CLK               528000000UL    /* Clock consumers of SYS_PLL2_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD0_CLK          352000000UL    /* Clock consumers of SYS_PLL2_PFD0_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD1_CLK          594000000UL    /* Clock consumers of SYS_PLL2_PFD1_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD2_CLK          396000000UL    /* Clock consumers of SYS_PLL2_PFD2_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL2_PFD3_CLK          297000000UL    /* Clock consumers of SYS_PLL2_PFD3_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_MODULATION     0UL            /* Clock consumers of SYS_PLL2_SS_MODULATION output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL2_SS_RANGE          0UL            /* Clock consumers of SYS_PLL2_SS_RANGE output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL3_CLK               480000000UL    /* Clock consumers of SYS_PLL3_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL3_DIV2_CLK          240000000UL    /* Clock consumers of SYS_PLL3_DIV2_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD0_CLK          664615384UL    /* Clock consumers of SYS_PLL3_PFD0_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD1_CLK          508235294UL    /* Clock consumers of SYS_PLL3_PFD1_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD2_CLK          270000000UL    /* Clock consumers of SYS_PLL3_PFD2_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_SYS_PLL3_PFD3_CLK          392727272UL    /* Clock consumers of SYS_PLL3_PFD3_CLK output : N/A */
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            24000000UL     /* Clock consumers of USDHC1_CLK_ROOT output : USDHC1 */
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            24000000UL     /* Clock consumers of USDHC2_CLK_ROOT output : USDHC2 */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c
new file mode 100644
index 000000000..81ffb35e3
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.c
@@ -0,0 +1,129 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v14.0
+processor: MIMXRT1176xxxxx
+package_id: MIMXRT1176DVMAA
+mcu_data: ksdk2_0
+processor_version: 14.0.1
+board: MIMXRT1170-EVKB
+external_user_signals: {}
+pin_labels:
+- {pin_num: M13, pin_signal: GPIO_AD_04, label: 'SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7]', identifier: SIM1_PD;LED;USER_LED}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: cm7, enableClock: 'true'}
+- pin_list:
+  - {pin_num: M15, peripheral: LPUART1, signal: RXD, pin_signal: GPIO_AD_25, software_input_on: Disable, pull_up_down_config: Pull_Down, pull_keeper_select: Keeper,
+    open_drain: Disable, drive_strength: High, slew_rate: Slow}
+  - {pin_num: L13, peripheral: LPUART1, signal: TXD, pin_signal: GPIO_AD_24, software_input_on: Disable, pull_up_down_config: Pull_Down, pull_keeper_select: Keeper,
+    open_drain: Disable, drive_strength: High, slew_rate: Slow}
+  - {pin_num: M13, peripheral: GPIO9, signal: 'gpio_io, 03', pin_signal: GPIO_AD_04, identifier: USER_LED, direction: OUTPUT, pull_up_down_config: Pull_Down, pull_keeper_select: Keeper}
+  - {pin_num: T8, peripheral: GPIO13, signal: 'gpio_io, 00', pin_signal: WAKEUP, direction: INPUT, pull_up_down_config: Pull_Up}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins, assigned for the Cortex-M7F core.
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);           /* LPCG on: LPCG is ON. */
+
+  /* GPIO configuration of USER_LED on GPIO_AD_04 (pin M13) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_AD_04 (pin M13) */
+  GPIO_PinInit(GPIO9, 3U, &USER_LED_config);
+
+  /* GPIO configuration of USER_BUTTON on WAKEUP_DIG (pin T8) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on WAKEUP_DIG (pin T8) */
+  GPIO_PinInit(GPIO13, 0U, &USER_BUTTON_config);
+
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_04_GPIO9_IO03,           /* GPIO_AD_04 is configured as GPIO9_IO03 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_24_LPUART1_TXD,          /* GPIO_AD_24 is configured as LPUART1_TXD */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_GPIO_AD_25_LPUART1_RXD,          /* GPIO_AD_25 is configured as LPUART1_RXD */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinMux(
+      IOMUXC_WAKEUP_DIG_GPIO13_IO00,          /* WAKEUP_DIG is configured as GPIO13_IO00 */
+      0U);                                    /* Software Input On Field: Input Path is determined by functionality */
+  IOMUXC_SetPinConfig(
+      IOMUXC_GPIO_AD_04_GPIO9_IO03,           /* GPIO_AD_04 PAD functional properties : */
+      0x02U);                                 /* Slew Rate Field: Slow Slew Rate
+                                                 Drive Strength Field: high drive strength
+                                                 Pull / Keep Select Field: Pull Disable, Highz
+                                                 Pull Up / Down Config. Field: Weak pull down
+                                                 Open Drain Field: Disabled
+                                                 Domain write protection: Both cores are allowed
+                                                 Domain write protection lock: Neither of DWP bits is locked */
+  IOMUXC_SetPinConfig(
+      IOMUXC_GPIO_AD_24_LPUART1_TXD,          /* GPIO_AD_24 PAD functional properties : */
+      0x02U);                                 /* Slew Rate Field: Slow Slew Rate
+                                                 Drive Strength Field: high drive strength
+                                                 Pull / Keep Select Field: Pull Disable, Highz
+                                                 Pull Up / Down Config. Field: Weak pull down
+                                                 Open Drain Field: Disabled
+                                                 Domain write protection: Both cores are allowed
+                                                 Domain write protection lock: Neither of DWP bits is locked */
+  IOMUXC_SetPinConfig(
+      IOMUXC_GPIO_AD_25_LPUART1_RXD,          /* GPIO_AD_25 PAD functional properties : */
+      0x02U);                                 /* Slew Rate Field: Slow Slew Rate
+                                                 Drive Strength Field: high drive strength
+                                                 Pull / Keep Select Field: Pull Disable, Highz
+                                                 Pull Up / Down Config. Field: Weak pull down
+                                                 Open Drain Field: Disabled
+                                                 Domain write protection: Both cores are allowed
+                                                 Domain write protection lock: Neither of DWP bits is locked */
+  IOMUXC_SetPinConfig(
+      IOMUXC_WAKEUP_DIG_GPIO13_IO00,          /* WAKEUP_DIG PAD functional properties : */
+      0x0EU);                                 /* Slew Rate Field: Slow Slew Rate
+                                                 Drive Strength Field: high driver
+                                                 Pull / Keep Select Field: Pull Enable
+                                                 Pull Up / Down Config. Field: Weak pull up
+                                                 Open Drain SNVS Field: Disabled
+                                                 Domain write protection: Both cores are allowed
+                                                 Domain write protection lock: Neither of DWP bits is locked */
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h
new file mode 100644
index 000000000..550bd1474
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/board/pin_mux.h
@@ -0,0 +1,77 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/* GPIO_AD_25 (coord M15), LPUART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_LPUART1_RXD_PERIPHERAL                            LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_LPUART1_RXD_SIGNAL                                    RXD   /*!< Signal name */
+
+/* GPIO_AD_24 (coord L13), LPUART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITPINS_LPUART1_TXD_PERIPHERAL                            LPUART1   /*!< Peripheral name */
+#define BOARD_INITPINS_LPUART1_TXD_SIGNAL                                    TXD   /*!< Signal name */
+
+/* GPIO_AD_04 (coord M13), SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7] */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO9   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       3U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO9   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                      3U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                         (1U << 3U)   /*!< GPIO pin mask */
+
+/* WAKEUP (coord T8), USER_BUTTON */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                             GPIO13   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    0U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                   GPIO13   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   0U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 0U)   /*!< GPIO pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);                    /* Function assigned for the Cortex-M7F */
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.c b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.c
new file mode 100644
index 000000000..0425cb2cb
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2018-2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "evkbmimxrt1170_flexspi_nor_config.h"
+
+/* Component ID definition, used by tools. */
+#ifndef FSL_COMPONENT_ID
+#define FSL_COMPONENT_ID "platform.drivers.xip_board"
+#endif
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1)
+#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__)
+__attribute__((section(".boot_hdr.conf"), used))
+#elif defined(__ICCARM__)
+#pragma location = ".boot_hdr.conf"
+#endif
+
+const flexspi_nor_config_t qspiflash_config = {
+    .memConfig =
+        {
+            .tag              = FLEXSPI_CFG_BLK_TAG,
+            .version          = FLEXSPI_CFG_BLK_VERSION,
+            .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad,
+            .csHoldTime       = 3u,
+            .csSetupTime      = 3u,
+            // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock
+            .controllerMiscOption = 0x10,
+            .deviceType           = kFlexSpiDeviceType_SerialNOR,
+            .sflashPadType        = kSerialFlash_4Pads,
+            .serialClkFreq        = kFlexSpiSerialClk_133MHz,
+            .sflashA1Size         = 64u * 1024u * 1024u,
+            .lookupTable =
+                {
+                    // Read LUTs
+                    [0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEC, RADDR_SDR, FLEXSPI_4PAD, 0x20),
+                    [1] = FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04),
+
+                    // Read Status LUTs
+                    [4 * 1 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x05, READ_SDR, FLEXSPI_1PAD, 0x04),
+
+                    // Write Enable LUTs
+                    [4 * 3 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x06, STOP, FLEXSPI_1PAD, 0x0),
+
+                    // Erase Sector LUTs
+                    [4 * 5 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x21, RADDR_SDR, FLEXSPI_1PAD, 0x20),
+
+                    // Erase Block LUTs
+                    [4 * 8 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xD8, RADDR_SDR, FLEXSPI_1PAD, 0x18),
+
+                    // Pape Program LUTs
+                    [4 * 9 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x12, RADDR_SDR, FLEXSPI_1PAD, 0x20),
+                    [4 * 9 + 1] = FLEXSPI_LUT_SEQ(WRITE_SDR, FLEXSPI_1PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0),
+
+                    // Erase Chip LUTs
+                    [4 * 11 + 0] = FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0x60, STOP, FLEXSPI_1PAD, 0x0),
+                },
+        },
+    .pageSize           = 256u,
+    .sectorSize         = 4u * 1024u,
+    .ipcmdSerialClkFreq = 0x1,
+    .blockSize          = 64u * 1024u,
+    .isUniformBlockSize = false,
+};
+#endif /* XIP_BOOT_HEADER_ENABLE */
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.h b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.h
new file mode 100644
index 000000000..839bb78f5
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/evkbmimxrt1170_flexspi_nor_config.h
@@ -0,0 +1,270 @@
+/*
+ * Copyright 2018-2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __EVKMIMXRT1170_FLEXSPI_NOR_CONFIG__
+#define __EVKMIMXRT1170_FLEXSPI_NOR_CONFIG__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "fsl_common.h"
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief XIP_BOARD driver version 2.0.1. */
+#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
+/*@}*/
+
+/* FLEXSPI memory config block related definitions */
+#define FLEXSPI_CFG_BLK_TAG     (0x42464346UL) // ascii "FCFB" Big Endian
+#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
+#define FLEXSPI_CFG_BLK_SIZE    (512)
+
+/* FLEXSPI Feature related definitions */
+#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
+
+/* Lookup table related definitions */
+#define CMD_INDEX_READ        0
+#define CMD_INDEX_READSTATUS  1
+#define CMD_INDEX_WRITEENABLE 2
+#define CMD_INDEX_WRITE       4
+
+#define CMD_LUT_SEQ_IDX_READ        0
+#define CMD_LUT_SEQ_IDX_READSTATUS  1
+#define CMD_LUT_SEQ_IDX_WRITEENABLE 3
+#define CMD_LUT_SEQ_IDX_WRITE       9
+
+#define CMD_SDR        0x01
+#define CMD_DDR        0x21
+#define RADDR_SDR      0x02
+#define RADDR_DDR      0x22
+#define CADDR_SDR      0x03
+#define CADDR_DDR      0x23
+#define MODE1_SDR      0x04
+#define MODE1_DDR      0x24
+#define MODE2_SDR      0x05
+#define MODE2_DDR      0x25
+#define MODE4_SDR      0x06
+#define MODE4_DDR      0x26
+#define MODE8_SDR      0x07
+#define MODE8_DDR      0x27
+#define WRITE_SDR      0x08
+#define WRITE_DDR      0x28
+#define READ_SDR       0x09
+#define READ_DDR       0x29
+#define LEARN_SDR      0x0A
+#define LEARN_DDR      0x2A
+#define DATSZ_SDR      0x0B
+#define DATSZ_DDR      0x2B
+#define DUMMY_SDR      0x0C
+#define DUMMY_DDR      0x2C
+#define DUMMY_RWDS_SDR 0x0D
+#define DUMMY_RWDS_DDR 0x2D
+#define JMP_ON_CS      0x1F
+#define STOP           0
+
+#define FLEXSPI_1PAD 0
+#define FLEXSPI_2PAD 1
+#define FLEXSPI_4PAD 2
+#define FLEXSPI_8PAD 3
+
+#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)                                                              \
+    (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \
+     FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1))
+
+//!@brief Definitions for FlexSPI Serial Clock Frequency
+typedef enum _FlexSpiSerialClockFreq
+{
+    kFlexSpiSerialClk_30MHz  = 1,
+    kFlexSpiSerialClk_50MHz  = 2,
+    kFlexSpiSerialClk_60MHz  = 3,
+    kFlexSpiSerialClk_80MHz  = 4,
+    kFlexSpiSerialClk_100MHz = 5,
+    kFlexSpiSerialClk_120MHz = 6,
+    kFlexSpiSerialClk_133MHz = 7,
+    kFlexSpiSerialClk_166MHz = 8,
+    kFlexSpiSerialClk_200MHz = 9,
+} flexspi_serial_clk_freq_t;
+
+//!@brief FlexSPI clock configuration type
+enum
+{
+    kFlexSpiClk_SDR, //!< Clock configure for SDR mode
+    kFlexSpiClk_DDR, //!< Clock configurat for DDR mode
+};
+
+//!@brief FlexSPI Read Sample Clock Source definition
+typedef enum _FlashReadSampleClkSource
+{
+    kFlexSPIReadSampleClk_LoopbackInternally      = 0,
+    kFlexSPIReadSampleClk_LoopbackFromDqsPad      = 1,
+    kFlexSPIReadSampleClk_LoopbackFromSckPad      = 2,
+    kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3,
+} flexspi_read_sample_clk_t;
+
+//!@brief Misc feature bit definitions
+enum
+{
+    kFlexSpiMiscOffset_DiffClkEnable            = 0, //!< Bit for Differential clock enable
+    kFlexSpiMiscOffset_Ck2Enable                = 1, //!< Bit for CK2 enable
+    kFlexSpiMiscOffset_ParallelEnable           = 2, //!< Bit for Parallel mode enable
+    kFlexSpiMiscOffset_WordAddressableEnable    = 3, //!< Bit for Word Addressable enable
+    kFlexSpiMiscOffset_SafeConfigFreqEnable     = 4, //!< Bit for Safe Configuration Frequency enable
+    kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable
+    kFlexSpiMiscOffset_DdrModeEnable            = 6, //!< Bit for DDR clock confiuration indication.
+};
+
+//!@brief Flash Type Definition
+enum
+{
+    kFlexSpiDeviceType_SerialNOR    = 1,    //!< Flash devices are Serial NOR
+    kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
+    kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
+    kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+};
+
+//!@brief Flash Pad Definitions
+enum
+{
+    kSerialFlash_1Pad  = 1,
+    kSerialFlash_2Pads = 2,
+    kSerialFlash_4Pads = 4,
+    kSerialFlash_8Pads = 8,
+};
+
+//!@brief FlexSPI LUT Sequence structure
+typedef struct _lut_sequence
+{
+    uint8_t seqNum; //!< Sequence Number, valid number: 1-16
+    uint8_t seqId;  //!< Sequence Index, valid number: 0-15
+    uint16_t reserved;
+} flexspi_lut_seq_t;
+
+//!@brief Flash Configuration Command Type
+enum
+{
+    kDeviceConfigCmdType_Generic,    //!< Generic command, for example: configure dummy cycles, drive strength, etc
+    kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command
+    kDeviceConfigCmdType_Spi2Xpi,    //!< Switch from SPI to DPI/QPI/OPI mode
+    kDeviceConfigCmdType_Xpi2Spi,    //!< Switch from DPI/QPI/OPI to SPI mode
+    kDeviceConfigCmdType_Spi2NoCmd,  //!< Switch to 0-4-4/0-8-8 mode
+    kDeviceConfigCmdType_Reset,      //!< Reset device command
+};
+
+//!@brief FlexSPI Memory Configuration Block
+typedef struct _FlexSPIConfig
+{
+    uint32_t tag;               //!< [0x000-0x003] Tag, fixed value 0x42464346UL
+    uint32_t version;           //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix
+    uint32_t reserved0;         //!< [0x008-0x00b] Reserved for future use
+    uint8_t readSampleClkSrc;   //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3
+    uint8_t csHoldTime;         //!< [0x00d-0x00d] CS hold time, default value: 3
+    uint8_t csSetupTime;        //!< [0x00e-0x00e] CS setup time, default value: 3
+    uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For
+    //! Serial NAND, need to refer to datasheet
+    uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable
+    uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch,
+    //! Generic configuration, etc.
+    uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for
+    //! DPI/QPI/OPI switch or reset command
+    flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt
+    //! sequence number, [31:16] Reserved
+    uint32_t deviceModeArg;    //!< [0x018-0x01b] Argument/Parameter for device configuration
+    uint8_t configCmdEnable;   //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable
+    uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe
+    flexspi_lut_seq_t
+        configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq
+    uint32_t reserved1;   //!< [0x02c-0x02f] Reserved for future use
+    uint32_t configCmdArgs[3];     //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands
+    uint32_t reserved2;            //!< [0x03c-0x03f] Reserved for future use
+    uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more
+    //! details
+    uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
+    uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
+    //! Chapter for more details
+    uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
+    //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
+    uint32_t reserved3[2];           //!< [0x048-0x04f] Reserved for future use
+    uint32_t sflashA1Size;           //!< [0x050-0x053] Size of Flash connected to A1
+    uint32_t sflashA2Size;           //!< [0x054-0x057] Size of Flash connected to A2
+    uint32_t sflashB1Size;           //!< [0x058-0x05b] Size of Flash connected to B1
+    uint32_t sflashB2Size;           //!< [0x05c-0x05f] Size of Flash connected to B2
+    uint32_t csPadSettingOverride;   //!< [0x060-0x063] CS pad setting override value
+    uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value
+    uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value
+    uint32_t dqsPadSettingOverride;  //!< [0x06c-0x06f] DQS pad setting override value
+    uint32_t timeoutInMs;            //!< [0x070-0x073] Timeout threshold for read status command
+    uint32_t commandInterval;        //!< [0x074-0x077] CS deselect interval between two commands
+    uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns
+    uint16_t busyOffset;       //!< [0x07c-0x07d] Busy offset, valid value: 0-31
+    uint16_t busyBitPolarity;  //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 -
+    //! busy flag is 0 when flash device is busy
+    uint32_t lookupTable[64];           //!< [0x080-0x17f] Lookup table holds Flash command sequences
+    flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences
+    uint32_t reserved4[4];              //!< [0x1b0-0x1bf] Reserved for future use
+} flexspi_mem_config_t;
+
+/*  */
+#define NOR_CMD_INDEX_READ        CMD_INDEX_READ        //!< 0
+#define NOR_CMD_INDEX_READSTATUS  CMD_INDEX_READSTATUS  //!< 1
+#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2
+#define NOR_CMD_INDEX_ERASESECTOR 3                     //!< 3
+#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE       //!< 4
+#define NOR_CMD_INDEX_CHIPERASE   5                     //!< 5
+#define NOR_CMD_INDEX_DUMMY       6                     //!< 6
+#define NOR_CMD_INDEX_ERASEBLOCK  7                     //!< 7
+
+#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0  READ LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \
+    CMD_LUT_SEQ_IDX_READSTATUS //!< 1  Read Status LUT sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \
+    2 //!< 2  Read status DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \
+    CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3  Write Enable sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \
+    4 //!< 4  Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5  Erase Sector sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK  8 //!< 8 Erase Block sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \
+    CMD_LUT_SEQ_IDX_WRITE                //!< 9  Program sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \
+    14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block
+#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \
+    15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk
+
+/*
+ *  Serial NOR configuration block
+ */
+typedef struct _flexspi_nor_config
+{
+    flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI
+    uint32_t pageSize;              //!< Page size of Serial NOR
+    uint32_t sectorSize;            //!< Sector size of Serial NOR
+    uint8_t ipcmdSerialClkFreq;     //!< Clock frequency for IP command
+    uint8_t isUniformBlockSize;     //!< Sector/Block size is the same
+    uint8_t isDataOrderSwapped;     //!< The data order is swapped in OPI DDR mode
+    uint8_t reserved0;              //!< Reserved for future use
+    uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
+    uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
+    uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
+    uint32_t blockSize;             //!< Block size
+    uint32_t FlashStateCtx;         //!< Flash State Context after being configured
+    uint32_t reserve2[10];          //!< Reserved for future use
+} flexspi_nor_config_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __EVKMIMXRT1170_FLEXSPI_NOR_CONFIG__ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex
new file mode 100644
index 000000000..e68b9ea7e
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1170_evkb/mimxrt1170_evkb.mex
@@ -0,0 +1,662 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1176xxxxx" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_14 http://mcuxpresso.nxp.com/XSD/mex_configuration_14.xsd" uuid="060646c1-2247-47a8-b52d-03c1968b4426" version="14" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_14" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1176xxxxx</processor>
+      <package>MIMXRT1176DVMAA</package>
+      <board>MIMXRT1170-EVKB</board>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="cm7">
+         <core name="Cortex-M4F" id="cm4" description=""/>
+         <core name="Cortex-M7F" id="cm7" description=""/>
+      </cores>
+      <description>Configuration imported from evkbmimxrt1170_dev_cdc_vcom_lite_bm_cm7</description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="14.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>14.0.1</processor_version>
+            <pin_labels>
+               <pin_label pin_num="M13" pin_signal="GPIO_AD_04" label="SIM1_PD/J44[C8]/USER_LED_CTL1/J9[8]/J25[7]" identifier="SIM1_PD;LED;USER_LED"/>
+            </pin_labels>
+            <external_user_signals>
+               <routingDetailsColumns/>
+               <properties/>
+            </external_user_signals>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>cm7</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RXD" pin_num="M15" pin_signal="GPIO_AD_25">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="drive_strength" value="High"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="TXD" pin_num="L13" pin_signal="GPIO_AD_24">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="drive_strength" value="High"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO9" signal="gpio_io, 03" pin_num="M13" pin_signal="GPIO_AD_04">
+                     <pin_features>
+                        <pin_feature name="identifier" value="USER_LED"/>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO13" signal="gpio_io, 00" pin_num="T8" pin_signal="WAKEUP">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>14.0.1</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.xtali" description="&apos;XTALI&apos; (Pins tool id: ANADIG.xtali, Clocks tool id: ANADIG_OSC.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.xtali" description="&apos;XTALI&apos; (Pins tool id: ANADIG.xtali, Clocks tool id: ANADIG_OSC.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.xtalo" description="&apos;XTALO&apos; (Pins tool id: ANADIG.xtalo, Clocks tool id: ANADIG_OSC.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.xtalo" description="&apos;XTALO&apos; (Pins tool id: ANADIG.xtalo, Clocks tool id: ANADIG_OSC.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: ANADIG.rtc_xtali, Clocks tool id: ANADIG_OSC.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: ANADIG.rtc_xtali, Clocks tool id: ANADIG_OSC.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: ANADIG.rtc_xtalo, Clocks tool id: ANADIG_OSC.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="ANADIG.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: ANADIG.rtc_xtalo, Clocks tool id: ANADIG_OSC.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm4">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm4">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.dcdc_soc" description="Clocks initialization requires the DCDC_SOC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm4">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.dcdc_soc" description="Clocks initialization requires the DCDC_SOC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.pmu_1" description="Clocks initialization requires the PMU_1 Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm4">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.pmu_1" description="Clocks initialization requires the PMU_1 Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm4">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.clock" description="Clocks initialization requires the CLOCK Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="cm7">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources/>
+               <clock_outputs>
+                  <clock_output id="ACMP_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ADC1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ADC2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ARM_PLL_CLK.outFreq" value="996 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ASRC_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="AXI_CLK_ROOT.outFreq" value="996 MHz" locked="false" accuracy=""/>
+                  <clock_output id="BUS_CLK_ROOT.outFreq" value="240 MHz" locked="false" accuracy=""/>
+                  <clock_output id="BUS_LPSR_CLK_ROOT.outFreq" value="160 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN3_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CCM_CLKO1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CCM_CLKO2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI2_ESC_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI2_UI_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSSYS_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSTRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ELCDIF_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="EMV1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="EMV2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_1G_TX_CLK.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_QOS_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_TIMER1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_TIMER2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_TIMER3_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GC355_CLK_ROOT.outFreq" value="492.0000125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT3_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT3_ipg_clk_highfreq.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT4_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT4_ipg_clk_highfreq.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT5_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT5_ipg_clk_highfreq.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT6_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT6_ipg_clk_highfreq.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIFV2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C3_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C4_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C5_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C6_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI3_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI4_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI5_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI6_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART10_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART11_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART12_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART3_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART4_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART5_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART6_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART7_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART8_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPUART9_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="M4_CLK_ROOT.outFreq" value="4320/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="M4_SYSTICK_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="M7_CLK_ROOT.outFreq" value="996 MHz" locked="false" accuracy=""/>
+                  <clock_output id="M7_SYSTICK_CLK_ROOT.outFreq" value="100 kHz" locked="false" accuracy=""/>
+                  <clock_output id="MIC_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MIPI_DSI_TX_CLK_ESC_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MIPI_ESC_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MIPI_REF_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="OSC_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="OSC_32K.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="OSC_RC_16M.outFreq" value="16 MHz" locked="false" accuracy=""/>
+                  <clock_output id="OSC_RC_400M.outFreq" value="400 MHz" locked="false" accuracy=""/>
+                  <clock_output id="OSC_RC_48M.outFreq" value="48 MHz" locked="false" accuracy=""/>
+                  <clock_output id="OSC_RC_48M_DIV2.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL_VIDEO_CLK.outFreq" value="984.000025 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI4_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI4_MCLK1.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL2_CLK.outFreq" value="528 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL2_PFD0_CLK.outFreq" value="352 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL2_PFD1_CLK.outFreq" value="594 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL2_PFD2_CLK.outFreq" value="396 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL2_PFD3_CLK.outFreq" value="297 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL3_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL3_DIV2_CLK.outFreq" value="240 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL3_PFD0_CLK.outFreq" value="8640/13 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL3_PFD1_CLK.outFreq" value="8640/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL3_PFD2_CLK.outFreq" value="270 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SYS_PLL3_PFD3_CLK.outFreq" value="4320/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="24 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CoreBusClockRootsInitializationConfig" value="selectedCore" locked="false"/>
+                  <setting id="SOCDomainVoltage" value="OD" locked="false"/>
+                  <setting id="ANADIG_OSC_OSC_24M_CTRL_LP_EN_CFG" value="Low" locked="false"/>
+                  <setting id="ANADIG_OSC_OSC_24M_CTRL_OSC_EN_CFG" value="Enabled" locked="false"/>
+                  <setting id="ANADIG_PLL.PLL_AUDIO_BYPASS.sel" value="ANADIG_OSC.OSC_24M" locked="false"/>
+                  <setting id="ANADIG_PLL.PLL_VIDEO.denom" value="960000" locked="false"/>
+                  <setting id="ANADIG_PLL.PLL_VIDEO.div" value="41" locked="false"/>
+                  <setting id="ANADIG_PLL.PLL_VIDEO.num" value="1" locked="false"/>
+                  <setting id="ANADIG_PLL.SYS_PLL1_BYPASS.sel" value="ANADIG_OSC.OSC_24M" locked="false"/>
+                  <setting id="ANADIG_PLL.SYS_PLL2.denom" value="268435455" locked="false"/>
+                  <setting id="ANADIG_PLL.SYS_PLL2.div" value="22" locked="false"/>
+                  <setting id="ANADIG_PLL.SYS_PLL2.num" value="0" locked="false"/>
+                  <setting id="ANADIG_PLL.SYS_PLL2_SS_DIV.scale" value="268435455" locked="false"/>
+                  <setting id="ANADIG_PLL.SYS_PLL3_PFD3_DIV.scale" value="22" locked="true"/>
+                  <setting id="ANADIG_PLL.SYS_PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="ANADIG_PLL_ARM_PLL_CTRL_POWERUP_CFG" value="Enabled" locked="false"/>
+                  <setting id="ANADIG_PLL_PLL_AUDIO_CTRL_GATE_CFG" value="Disabled" locked="false"/>
+                  <setting id="ANADIG_PLL_PLL_VIDEO_CTRL0_POWERUP_CFG" value="Enabled" locked="false"/>
+                  <setting id="ANADIG_PLL_SYS_PLL1_CTRL0_POWERUP_CFG" value="Disabled" locked="false"/>
+                  <setting id="ANADIG_PLL_SYS_PLL1_CTRL_GATE_CFG" value="Disabled" locked="false"/>
+                  <setting id="ANADIG_PLL_SYS_PLL2_CTRL_POWERUP_CFG" value="Enabled" locked="false"/>
+                  <setting id="ANADIG_PLL_SYS_PLL3_CTRL_POWERUP_CFG" value="Enabled" locked="false"/>
+                  <setting id="ANADIG_PLL_SYS_PLL3_CTRL_SYS_PLL3_DIV2_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT0.MUX.sel" value="ANADIG_PLL.ARM_PLL_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT1.MUX.sel" value="ANADIG_PLL.SYS_PLL3_PFD3_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT2.DIV.scale" value="2" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT2.MUX.sel" value="ANADIG_PLL.SYS_PLL3_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT25.DIV.scale" value="22" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT25.MUX.sel" value="ANADIG_PLL.SYS_PLL2_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT26.DIV.scale" value="22" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT26.MUX.sel" value="ANADIG_PLL.SYS_PLL2_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT3.DIV.scale" value="3" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT3.MUX.sel" value="ANADIG_PLL.SYS_PLL3_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT4.DIV.scale" value="3" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT4.MUX.sel" value="ANADIG_PLL.SYS_PLL2_PFD1_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT6.DIV.scale" value="4" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT6.MUX.sel" value="ANADIG_PLL.SYS_PLL2_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT68.DIV.scale" value="2" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT68.MUX.sel" value="ANADIG_PLL.PLL_VIDEO_CLK" locked="false"/>
+                  <setting id="CCM.CLOCK_ROOT8.DIV.scale" value="240" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>13.0.2</processor_version>
+            <output_format>c_array</output_format>
+         </dcdx_profile>
+         <dcdx_configurations>
+            <dcdx_configuration name="Device_configuration">
+               <description></description>
+               <options/>
+               <command_groups>
+                  <command_group name="Imported Commands" enabled="true">
+                     <commands>
+                        <command type="write_value" address="CCM_CLOCK_ROOT4_CONTROL" value="0x703" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_00" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_01" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_02" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_03" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_04" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_05" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_06" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_07" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_08" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_09" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_10" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_11" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_12" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_13" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_14" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_15" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_16" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_17" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_18" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_19" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_20" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_21" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_22" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_23" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_24" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_25" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_26" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_27" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_28" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_29" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_30" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_31" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_32" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_33" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_34" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_35" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_36" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_37" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_38" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B1_39" value="0x10" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_00" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_01" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_02" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_03" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_04" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_05" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_06" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_07" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_08" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_09" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_10" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_11" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_12" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_13" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_14" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_15" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_16" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_MUX_CTL_PAD_GPIO_EMC_B2_17" value="0x00" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_00" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_01" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_02" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_03" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_04" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_05" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_06" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_07" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_08" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_09" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_10" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_11" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_12" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_13" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_14" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_15" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_16" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_17" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_18" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_19" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_20" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_21" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_22" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_23" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_24" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_25" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_26" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_27" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_28" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_29" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_30" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_31" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_32" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_33" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_34" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_35" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_36" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_37" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_38" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B1_39" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_00" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_01" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_02" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_03" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_04" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_05" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_06" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_07" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_08" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_09" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_10" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_11" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_12" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_13" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_14" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_15" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_16" value="0x08" value_width="4"/>
+                        <command type="write_value" address="IOMUXC_SW_PAD_CTL_PAD_GPIO_EMC_B2_17" value="0x08" value_width="4"/>
+                        <command type="write_value" address="SEMC_MCR" value="0x10000004" value_width="4"/>
+                        <command type="write_value" address="SEMC_BMCR0" value="0x81" value_width="4"/>
+                        <command type="write_value" address="SEMC_BMCR1" value="0x81" value_width="4"/>
+                        <command type="write_value" address="SEMC_BR0" value="0x8000001D" value_width="4"/>
+                        <command type="write_value" address="SEMC_SDRAMCR0" value="0xF32" value_width="4"/>
+                        <command type="write_value" address="SEMC_SDRAMCR1" value="0x772A22" value_width="4"/>
+                        <command type="write_value" address="SEMC_SDRAMCR2" value="0x10A0D" value_width="4"/>
+                        <command type="write_value" address="SEMC_SDRAMCR3" value="0x21210408" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPCR0" value="0x80000000" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPCR1" value="0x02" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPCR2" value="0x00" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPCMD" value="0xA55A000F" value_width="4"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="write_value" address="SEMC_INTR" value="0x03" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPCMD" value="0xA55A000C" value_width="4"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="write_value" address="SEMC_INTR" value="0x03" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPCMD" value="0xA55A000C" value_width="4"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="write_value" address="SEMC_INTR" value="0x03" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPTXDAT" value="0x33" value_width="4"/>
+                        <command type="write_value" address="SEMC_IPCMD" value="0xA55A000A" value_width="4"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="nop"/>
+                        <command type="write_value" address="SEMC_INTR" value="0x03" value_width="4"/>
+                        <command type="write_value" address="SEMC_SDRAMCR3" value="0x21210409" value_width="4"/>
+                     </commands>
+                  </command_group>
+               </command_groups>
+            </dcdx_configuration>
+         </dcdx_configurations>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <dependencies>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="LPUART Driver not found in the toolchain/IDE project. Project will not compile!" problem_level="2" source="Peripherals">
+               <feature name="enabled" evaluation="equal">
+                  <data type="Boolean">true</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="Unsupported version of the LPUART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. Project might not compile correctly." problem_level="1" source="Peripherals">
+               <feature name="version" evaluation="equivalent">
+                  <data type="Version">2.5.1</data>
+               </feature>
+            </dependency>
+         </dependencies>
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="5580249f-8696-4d01-87fa-efd84baaea95" called_from_default_init="true" id_prefix="" core="cm7">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="ClockOutput" resourceId="LPUART1_CLK_ROOT" description="LPUART1 clock root is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="frequency" evaluation="greaterThan">
+                        <data type="Frequency" unit="Hz">0</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_tx" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="equal">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_rx" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="equal">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <instances>
+                  <instance name="NVIC" uuid="27e59fb2-3864-4b83-bf0e-a683a8582c73" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+                  <instance name="LPUART1" uuid="78f9b1b2-5105-4480-a25a-29d8172b6270" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="cd2726b0-9595-440c-9375-bb6a010a1d55" type_id="system_54b53072540eeeb8f8e9343e71f28176">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="2491c39d-c21a-45f3-a984-57be0f6a77b5" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="fefc514e-ed7f-48ad-a874-de332dd5eb13" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="1dc54607-ada6-4731-ad75-479a19616c00" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="88660053-1bc1-49b8-884c-a12532e98a7a" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="9d37100d-c1fb-4f7e-b235-a952c5b03275" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="ad9ccf5d-6535-4f75-bb23-abb7e6fcc950" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>N/A</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/teensy_40/board.cmake b/hw/bsp/imxrt/boards/teensy_40/board.cmake
new file mode 100644
index 000000000..41fdc78f5
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/board.cmake
@@ -0,0 +1,21 @@
+set(MCU_VARIANT MIMXRT1062)
+
+set(JLINK_DEVICE MIMXRT1062xxx6A)
+set(PYOCD_TARGET mimxrt1060)
+set(NXPLINK_DEVICE MIMXRT1062xxxxA:EVK-MIMXRT1060)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/teensy40_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1062DVL6A
+    BOARD_TUD_RHPORT=0
+    BOARD_TUH_RHPORT=1
+    )
+endfunction()
+
+# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli
+# Make sure it is in your PATH
+# flash: $(BUILD)/$(PROJECT).hex
+# teensy_loader_cli --mcu=imxrt1062 -v -w $<
diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h
index b3cc0a8c5..4a173c834 100644
--- a/hw/bsp/imxrt/boards/teensy_40/board.h
+++ b/hw/bsp/imxrt/boards/teensy_40/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -29,24 +29,21 @@
 #define BOARD_H_
 
 
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (2 * 1024 * 1024)
 
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13
-#define LED_PORT              GPIO2
-#define LED_PIN               3
+// LED D13: IOMUXC_GPIO_B0_03_GPIO2_IO03
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
-// no button
-#define BUTTON_PINMUX         IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12
-#define BUTTON_PORT           GPIO2
-#define BUTTON_PIN            1
+// no button D12: IOMUXC_GPIO_B0_01_GPIO2_IO01
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
 #define BUTTON_STATE_ACTIVE   0
 
-// UART
+// UART D0, D1: IOMUXC_GPIO_AD_B0_03_LPUART6_RX, IOMUXC_GPIO_AD_B0_02_LPUART6_TX
 #define UART_PORT             LPUART6
-#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_03_LPUART6_RX  // D0
-#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_02_LPUART6_TX  // D1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 
 #endif /* BOARD_H_ */
diff --git a/hw/bsp/imxrt/boards/teensy_40/board.mk b/hw/bsp/imxrt/boards/teensy_40/board.mk
index 0ad5ea5c0..45ca0fb6e 100644
--- a/hw/bsp/imxrt/boards/teensy_40/board.mk
+++ b/hw/bsp/imxrt/boards/teensy_40/board.mk
@@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062
 JLINK_DEVICE = MIMXRT1062xxx6A
 
 # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli
-# Make sure it is in your PATH 
+# Make sure it is in your PATH
 flash: $(BUILD)/$(PROJECT).hex
 	teensy_loader_cli --mcu=imxrt1062 -v -w $<
diff --git a/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c
new file mode 100644
index 000000000..c55e0135a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c
@@ -0,0 +1,509 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c
new file mode 100644
index 000000000..4c16be993
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.c
@@ -0,0 +1,181 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+pin_labels:
+- {pin_num: E7, pin_signal: GPIO_B0_01, label: LCDIF_ENABLE, identifier: USER_BUTTON}
+- {pin_num: D8, pin_signal: GPIO_B0_03, label: LCDIF_VSYNC, identifier: USER_LED}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: D8, peripheral: GPIO2, signal: 'gpio_io, 03', pin_signal: GPIO_B0_03, direction: OUTPUT}
+  - {pin_num: E7, peripheral: GPIO2, signal: 'gpio_io, 01', pin_signal: GPIO_B0_01, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  /* GPIO configuration of USER_BUTTON on GPIO_B0_01 (pin E7) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_B0_01 (pin E7) */
+  GPIO_PinInit(GPIO2, 1U, &USER_BUTTON_config);
+
+  /* GPIO configuration of USER_LED on GPIO_B0_03 (pin D8) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_B0_03 (pin D8) */
+  GPIO_PinInit(GPIO2, 3U, &USER_LED_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_GPIO2_IO03, 0U);
+  IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0xB0B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitDEBUG_UARTPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitUSDHCPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
+  - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
+  - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
+  - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
+  - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
+  - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
+  - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitUSDHCPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitUSDHCPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
+  - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h
new file mode 100644
index 000000000..f31f91598
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/board/pin_mux.h
@@ -0,0 +1,189 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x0AU /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */
+
+/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO2   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       3U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                      3U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                         (1U << 3U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                           3U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                              (1U << 3U)   /*!< PORT pin mask */
+
+/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO2   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    1U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   1U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 1U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        1U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 1U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< Signal name */
+
+/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL                             usdhc_cmd   /*!< Signal name */
+
+/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL                             usdhc_clk   /*!< Signal name */
+
+/* GPIO_B1_14 (coord C14), SD0_VSELECT */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL                        USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL                     usdhc_vselect   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitUSDHCPins(void);
+
+/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< Signal name */
+
+/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL                      FLEXSPI_A_DQS   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40.mex b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex
new file mode 100644
index 000000000..1ade853ae
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex
@@ -0,0 +1,651 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1060-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="2174caba-38fe-48d5-8f89-42a23354d23b" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1062xxxxA</processor>
+      <package>MIMXRT1062DVL6A</package>
+      <board>MIMXRT1060-EVK</board>
+      <board_revision>A2</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="E7" pin_signal="GPIO_B0_01" label="LCDIF_ENABLE" identifier="USER_BUTTON"/>
+               <pin_label pin_num="D8" pin_signal="GPIO_B0_03" label="LCDIF_VSYNC" identifier="USER_LED"/>
+            </pin_labels>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO2" signal="gpio_io, 03" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 01" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="96c1cec6-3bd3-47a2-8301-f38e4b0dd25f" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="eb0900eb-d552-4097-9dcf-a07e592a887f" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="f67d9a64-c26d-4421-9805-a062b24146f2" type="csi" type_id="csi_3739ec1355c7b915be929f3b7e35095b" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="f2c6cd0a-751c-4424-9248-a4d98da47de7" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="01f250e2-83d7-4b7b-a98d-772d1c3bdb42" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="90a0c31d-6042-4687-af0f-0892536bc1ba" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="3"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="b31fa225-2a52-486b-9c5c-33a184a2c716" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="aa3cc953-557b-4557-b7fe-6fedc31acf98" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="8b3f852e-ee1e-45e9-abff-0ff722f1d65d" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="539d282e-5136-4289-9058-9a46b221ca45" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="6e4c02c4-0524-4905-91b5-01d2e2502186" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c6d8fd36-2bbd-44c6-a160-54e7e12d0807" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="7d3626d3-4536-4838-a35d-3b8cf5a2bd71" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="738ea8df-6176-4e52-b4c7-b88aa9c17d13" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c
index 7929906eb..dbedc90a0 100644
--- a/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c
+++ b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.c
@@ -5,7 +5,7 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#include <bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h>
+#include "teensy40_flexspi_nor_config.h"
 
 /* Component ID definition, used by tools. */
 #ifndef FSL_COMPONENT_ID
diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h
index 56068ec6a..d24d4f10a 100644
--- a/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h
@@ -18,7 +18,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -26,7 +26,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -124,7 +124,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -185,7 +185,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -253,7 +253,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/boards/teensy_41/board.cmake b/hw/bsp/imxrt/boards/teensy_41/board.cmake
new file mode 100644
index 000000000..0fd8d528e
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/board.cmake
@@ -0,0 +1,21 @@
+set(MCU_VARIANT MIMXRT1062)
+
+set(JLINK_DEVICE MIMXRT1062xxx6A)
+set(PYOCD_TARGET mimxrt1060)
+set(NXPLINK_DEVICE MIMXRT1062xxxxA:EVK-MIMXRT1060)
+
+function(update_board TARGET)
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/teensy41_flexspi_nor_config.c
+    )
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MIMXRT1062DVL6A
+    BOARD_TUD_RHPORT=0
+    BOARD_TUH_RHPORT=1
+    )
+endfunction()
+
+# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli
+# Make sure it is in your PATH
+# flash: $(BUILD)/$(PROJECT).hex
+# teensy_loader_cli --mcu=imxrt1062 -v -w $<
diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h
index b0b4931c7..358684126 100644
--- a/hw/bsp/imxrt/boards/teensy_41/board.h
+++ b/hw/bsp/imxrt/boards/teensy_41/board.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019, Ha Thach (tinyusb.org)
@@ -29,24 +29,21 @@
 #define BOARD_H_
 
 
-// required since iMX RT10xx SDK include this file for board size
+// required since iMXRT MCUX-SDK include this file for board size
 #define BOARD_FLASH_SIZE (8 * 1024 * 1024)
 
-// LED
-#define LED_PINMUX            IOMUXC_GPIO_B0_03_GPIO2_IO03 // D13
-#define LED_PORT              GPIO2
-#define LED_PIN               3
+// LED D13: IOMUXC_GPIO_B0_03_GPIO2_IO03
+#define LED_PORT              BOARD_INITPINS_USER_LED_PERIPHERAL
+#define LED_PIN               BOARD_INITPINS_USER_LED_CHANNEL
 #define LED_STATE_ON          0
 
-// no button
-#define BUTTON_PINMUX         IOMUXC_GPIO_B0_01_GPIO2_IO01 // D12
-#define BUTTON_PORT           GPIO2
-#define BUTTON_PIN            1
+// no button D12: IOMUXC_GPIO_B0_01_GPIO2_IO01
+#define BUTTON_PORT           BOARD_INITPINS_USER_BUTTON_PERIPHERAL
+#define BUTTON_PIN            BOARD_INITPINS_USER_BUTTON_CHANNEL
 #define BUTTON_STATE_ACTIVE   0
 
-// UART
+// UART D0, D1: IOMUXC_GPIO_AD_B0_03_LPUART6_RX, IOMUXC_GPIO_AD_B0_02_LPUART6_TX
 #define UART_PORT             LPUART6
-#define UART_RX_PINMUX        IOMUXC_GPIO_AD_B0_03_LPUART6_RX  // D0
-#define UART_TX_PINMUX        IOMUXC_GPIO_AD_B0_02_LPUART6_TX  // D1
+#define UART_CLK_ROOT         BOARD_BOOTCLOCKRUN_UART_CLK_ROOT
 
 #endif /* BOARD_H_ */
diff --git a/hw/bsp/imxrt/boards/teensy_41/board.mk b/hw/bsp/imxrt/boards/teensy_41/board.mk
index 0ad5ea5c0..45ca0fb6e 100644
--- a/hw/bsp/imxrt/boards/teensy_41/board.mk
+++ b/hw/bsp/imxrt/boards/teensy_41/board.mk
@@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062
 JLINK_DEVICE = MIMXRT1062xxx6A
 
 # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli
-# Make sure it is in your PATH 
+# Make sure it is in your PATH
 flash: $(BUILD)/$(PROJECT).hex
 	teensy_loader_cli --mcu=imxrt1062 -v -w $<
diff --git a/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c
new file mode 100644
index 000000000..c55e0135a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c
@@ -0,0 +1,509 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c
new file mode 100644
index 000000000..4c16be993
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.c
@@ -0,0 +1,181 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v13.1
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+pin_labels:
+- {pin_num: E7, pin_signal: GPIO_B0_01, label: LCDIF_ENABLE, identifier: USER_BUTTON}
+- {pin_num: D8, pin_signal: GPIO_B0_03, label: LCDIF_VSYNC, identifier: USER_LED}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+#include "fsl_common.h"
+#include "fsl_iomuxc.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void) {
+    BOARD_InitPins();
+    BOARD_InitDEBUG_UARTPins();
+}
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: D8, peripheral: GPIO2, signal: 'gpio_io, 03', pin_signal: GPIO_B0_03, direction: OUTPUT}
+  - {pin_num: E7, peripheral: GPIO2, signal: 'gpio_io, 01', pin_signal: GPIO_B0_01, direction: INPUT, pull_up_down_config: Pull_Up_100K_Ohm, pull_keeper_select: Pull}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  /* GPIO configuration of USER_BUTTON on GPIO_B0_01 (pin E7) */
+  gpio_pin_config_t USER_BUTTON_config = {
+      .direction = kGPIO_DigitalInput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_B0_01 (pin E7) */
+  GPIO_PinInit(GPIO2, 1U, &USER_BUTTON_config);
+
+  /* GPIO configuration of USER_LED on GPIO_B0_03 (pin D8) */
+  gpio_pin_config_t USER_LED_config = {
+      .direction = kGPIO_DigitalOutput,
+      .outputLogic = 0U,
+      .interruptMode = kGPIO_NoIntmode
+  };
+  /* Initialize GPIO functionality on GPIO_B0_03 (pin D8) */
+  GPIO_PinInit(GPIO2, 3U, &USER_LED_config);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B0_03_GPIO2_IO03, 0U);
+  IOMUXC_GPR->GPR27 = ((IOMUXC_GPR->GPR27 &
+    (~(BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK)))
+      | IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL(0x00U)
+    );
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_01_GPIO2_IO01, 0xB0B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitDEBUG_UARTPins:
+- options: {callFromInitBoot: 'true', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: K14, peripheral: LPUART1, signal: TX, pin_signal: GPIO_AD_B0_12, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+  - {pin_num: L14, peripheral: LPUART1, signal: RX, pin_signal: GPIO_AD_B0_13, software_input_on: Disable, hysteresis_enable: Disable, pull_up_down_config: Pull_Down_100K_Ohm,
+    pull_keeper_select: Keeper, pull_keeper_enable: Enable, open_drain: Disable, speed: MHZ_100, drive_strength: R0_6, slew_rate: Slow}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitDEBUG_UARTPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitDEBUG_UARTPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_12_LPUART1_TX, 0x10B0U);
+  IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B0_13_LPUART1_RX, 0x10B0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitUSDHCPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: J2, peripheral: USDHC1, signal: 'usdhc_data, 3', pin_signal: GPIO_SD_B0_05}
+  - {pin_num: H2, peripheral: USDHC1, signal: 'usdhc_data, 2', pin_signal: GPIO_SD_B0_04}
+  - {pin_num: K1, peripheral: USDHC1, signal: 'usdhc_data, 1', pin_signal: GPIO_SD_B0_03}
+  - {pin_num: J1, peripheral: USDHC1, signal: 'usdhc_data, 0', pin_signal: GPIO_SD_B0_02}
+  - {pin_num: J4, peripheral: USDHC1, signal: usdhc_cmd, pin_signal: GPIO_SD_B0_00}
+  - {pin_num: J3, peripheral: USDHC1, signal: usdhc_clk, pin_signal: GPIO_SD_B0_01}
+  - {pin_num: C14, peripheral: USDHC1, signal: usdhc_vselect, pin_signal: GPIO_B1_14}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitUSDHCPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitUSDHCPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_B1_14_USDHC1_VSELECT, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_00_USDHC1_CMD, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_01_USDHC1_CLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3, 0U);
+}
+
+
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitQSPIPins:
+- options: {callFromInitBoot: 'false', coreID: core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: P3, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA0, pin_signal: GPIO_SD_B1_08}
+  - {pin_num: N4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA1, pin_signal: GPIO_SD_B1_09}
+  - {pin_num: P4, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA2, pin_signal: GPIO_SD_B1_10}
+  - {pin_num: P5, peripheral: FLEXSPI, signal: FLEXSPI_A_DATA3, pin_signal: GPIO_SD_B1_11}
+  - {pin_num: L4, peripheral: FLEXSPI, signal: FLEXSPI_A_SCLK, pin_signal: GPIO_SD_B1_07}
+  - {pin_num: L3, peripheral: FLEXSPI, signal: FLEXSPI_A_SS0_B, pin_signal: GPIO_SD_B1_06}
+  - {pin_num: N3, peripheral: FLEXSPI, signal: FLEXSPI_A_DQS, pin_signal: GPIO_SD_B1_05}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitQSPIPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitQSPIPins(void) {
+  CLOCK_EnableClock(kCLOCK_Iomuxc);
+
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_05_FLEXSPIA_DQS, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_06_FLEXSPIA_SS0_B, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_07_FLEXSPIA_SCLK, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_08_FLEXSPIA_DATA00, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_09_FLEXSPIA_DATA01, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_10_FLEXSPIA_DATA02, 0U);
+  IOMUXC_SetPinMux(IOMUXC_GPIO_SD_B1_11_FLEXSPIA_DATA03, 0U);
+}
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h
new file mode 100644
index 000000000..f31f91598
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/board/pin_mux.h
@@ -0,0 +1,189 @@
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/***********************************************************************************************************************
+ * Definitions
+ **********************************************************************************************************************/
+
+/*! @brief Direction type  */
+typedef enum _pin_mux_direction
+{
+  kPIN_MUX_DirectionInput = 0U,         /* Input direction */
+  kPIN_MUX_DirectionOutput = 1U,        /* Output direction */
+  kPIN_MUX_DirectionInputOrOutput = 2U  /* Input or output direction */
+} pin_mux_direction_t;
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+#define BOARD_INITPINS_IOMUXC_GPR_GPR27_GPIO_MUX2_GPIO_SEL_MASK 0x0AU /*!< GPIO2 and GPIO7 share same IO MUX function, GPIO_MUX2 selects one GPIO function: affected bits mask */
+
+/* GPIO_B0_03 (coord D8), LCDIF_VSYNC */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_LED_PERIPHERAL                                 GPIO2   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_LED_SIGNAL                                   gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_LED_CHANNEL                                       3U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_LED_GPIO                                       GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN                                      3U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_LED_GPIO_PIN_MASK                         (1U << 3U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_LED_PORT                                       GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_LED_PIN                                           3U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_LED_PIN_MASK                              (1U << 3U)   /*!< PORT pin mask */
+
+/* GPIO_B0_01 (coord E7), LCDIF_ENABLE */
+/* Routed pin properties */
+#define BOARD_INITPINS_USER_BUTTON_PERIPHERAL                              GPIO2   /*!< Peripheral name */
+#define BOARD_INITPINS_USER_BUTTON_SIGNAL                                gpio_io   /*!< Signal name */
+#define BOARD_INITPINS_USER_BUTTON_CHANNEL                                    1U   /*!< Signal channel */
+
+/* Symbols to be used with GPIO driver */
+#define BOARD_INITPINS_USER_BUTTON_GPIO                                    GPIO2   /*!< GPIO peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN                                   1U   /*!< GPIO pin number */
+#define BOARD_INITPINS_USER_BUTTON_GPIO_PIN_MASK                      (1U << 1U)   /*!< GPIO pin mask */
+#define BOARD_INITPINS_USER_BUTTON_PORT                                    GPIO2   /*!< PORT peripheral base pointer */
+#define BOARD_INITPINS_USER_BUTTON_PIN                                        1U   /*!< PORT pin number */
+#define BOARD_INITPINS_USER_BUTTON_PIN_MASK                           (1U << 1U)   /*!< PORT pin mask */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+/* GPIO_AD_B0_12 (coord K14), UART1_TXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_TXD_SIGNAL                             TX   /*!< Signal name */
+
+/* GPIO_AD_B0_13 (coord L14), UART1_RXD */
+/* Routed pin properties */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_PERIPHERAL                    LPUART1   /*!< Peripheral name */
+#define BOARD_INITDEBUG_UARTPINS_UART1_RXD_SIGNAL                             RX   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitDEBUG_UARTPins(void);
+
+/* GPIO_SD_B0_05 (coord J2), SD1_D3 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D3_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D3_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D3_CHANNEL                                    3U   /*!< Signal channel */
+
+/* GPIO_SD_B0_04 (coord H2), SD1_D2 */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D2_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D2_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D2_CHANNEL                                    2U   /*!< Signal channel */
+
+/* GPIO_SD_B0_03 (coord K1), SD1_D1/J24[5]/SPI_MISO */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D1_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D1_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D1_CHANNEL                                    1U   /*!< Signal channel */
+
+/* GPIO_SD_B0_02 (coord J1), SD1_D0/J24[4]/SPI_MOSI/PWM */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_D0_PERIPHERAL                             USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_D0_SIGNAL                             usdhc_data   /*!< Signal name */
+#define BOARD_INITUSDHCPINS_SD1_D0_CHANNEL                                    0U   /*!< Signal channel */
+
+/* GPIO_SD_B0_00 (coord J4), SD1_CMD/J24[6] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CMD_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CMD_SIGNAL                             usdhc_cmd   /*!< Signal name */
+
+/* GPIO_SD_B0_01 (coord J3), SD1_CLK/J24[3] */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD1_CLK_PERIPHERAL                            USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD1_CLK_SIGNAL                             usdhc_clk   /*!< Signal name */
+
+/* GPIO_B1_14 (coord C14), SD0_VSELECT */
+/* Routed pin properties */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_PERIPHERAL                        USDHC1   /*!< Peripheral name */
+#define BOARD_INITUSDHCPINS_SD0_VSELECT_SIGNAL                     usdhc_vselect   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitUSDHCPins(void);
+
+/* GPIO_SD_B1_08 (coord P3), FlexSPI_D0_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D0_A_SIGNAL                   FLEXSPI_A_DATA0   /*!< Signal name */
+
+/* GPIO_SD_B1_09 (coord N4), FlexSPI_D1_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D1_A_SIGNAL                   FLEXSPI_A_DATA1   /*!< Signal name */
+
+/* GPIO_SD_B1_10 (coord P4), FlexSPI_D2_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D2_A_SIGNAL                   FLEXSPI_A_DATA2   /*!< Signal name */
+
+/* GPIO_SD_B1_11 (coord P5), FlexSPI_D3_A */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_PERIPHERAL                       FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_D3_A_SIGNAL                   FLEXSPI_A_DATA3   /*!< Signal name */
+
+/* GPIO_SD_B1_07 (coord L4), FlexSPI_CLK */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_CLK_SIGNAL                     FLEXSPI_A_SCLK   /*!< Signal name */
+
+/* GPIO_SD_B1_06 (coord L3), FlexSPI_SS0 */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_SS0_SIGNAL                    FLEXSPI_A_SS0_B   /*!< Signal name */
+
+/* GPIO_SD_B1_05 (coord N3), FlexSPI_DQS */
+/* Routed pin properties */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_PERIPHERAL                        FLEXSPI   /*!< Peripheral name */
+#define BOARD_INITQSPIPINS_FlexSPI_DQS_SIGNAL                      FLEXSPI_A_DQS   /*!< Signal name */
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitQSPIPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41.mex b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex
new file mode 100644
index 000000000..1ade853ae
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex
@@ -0,0 +1,651 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1060-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="2174caba-38fe-48d5-8f89-42a23354d23b" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1062xxxxA</processor>
+      <package>MIMXRT1062DVL6A</package>
+      <board>MIMXRT1060-EVK</board>
+      <board_revision>A2</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <pin_labels>
+               <pin_label pin_num="E7" pin_signal="GPIO_B0_01" label="LCDIF_ENABLE" identifier="USER_BUTTON"/>
+               <pin_label pin_num="D8" pin_signal="GPIO_B0_03" label="LCDIF_VSYNC" identifier="USER_LED"/>
+            </pin_labels>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO2" signal="gpio_io, 03" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 01" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="96c1cec6-3bd3-47a2-8301-f38e4b0dd25f" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="eb0900eb-d552-4097-9dcf-a07e592a887f" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="f67d9a64-c26d-4421-9805-a062b24146f2" type="csi" type_id="csi_3739ec1355c7b915be929f3b7e35095b" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="f2c6cd0a-751c-4424-9248-a4d98da47de7" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="01f250e2-83d7-4b7b-a98d-772d1c3bdb42" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="90a0c31d-6042-4687-af0f-0892536bc1ba" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="3"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="b31fa225-2a52-486b-9c5c-33a184a2c716" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="aa3cc953-557b-4557-b7fe-6fedc31acf98" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="8b3f852e-ee1e-45e9-abff-0ff722f1d65d" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="539d282e-5136-4289-9058-9a46b221ca45" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="6e4c02c4-0524-4905-91b5-01d2e2502186" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c6d8fd36-2bbd-44c6-a160-54e7e12d0807" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="7d3626d3-4536-4838-a35d-3b8cf5a2bd71" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="738ea8df-6176-4e52-b4c7-b88aa9c17d13" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c
index 2d2bf8f09..f40c72cf7 100644
--- a/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c
+++ b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.c
@@ -5,7 +5,7 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#include <bsp/imxrt/boards/teensy_40/teensy40_flexspi_nor_config.h>
+#include "teensy41_flexspi_nor_config.h"
 
 /* Component ID definition, used by tools. */
 #ifndef FSL_COMPONENT_ID
diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h
index 56068ec6a..d24d4f10a 100644
--- a/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h
+++ b/hw/bsp/imxrt/boards/teensy_41/teensy41_flexspi_nor_config.h
@@ -18,7 +18,7 @@
 #define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
 /*@}*/
 
-/* FLEXSPI memory config block related defintions */
+/* FLEXSPI memory config block related definitions */
 #define FLEXSPI_CFG_BLK_TAG (0x42464346UL)     // ascii "FCFB" Big Endian
 #define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0
 #define FLEXSPI_CFG_BLK_SIZE (512)
@@ -26,7 +26,7 @@
 /* FLEXSPI Feature related definitions */
 #define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1
 
-/* Lookup table related defintions */
+/* Lookup table related definitions */
 #define CMD_INDEX_READ 0
 #define CMD_INDEX_READSTATUS 1
 #define CMD_INDEX_WRITEENABLE 2
@@ -124,7 +124,7 @@ enum
     kFlexSpiDeviceType_SerialNAND   = 2,    //!< Flash devices are Serial NAND
     kFlexSpiDeviceType_SerialRAM    = 3,    //!< Flash devices are Serial RAM/HyperFLASH
     kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND
-    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs
+    kFlexSpiDeviceType_MCP_NOR_RAM  = 0x13, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial RAMs
 };
 
 //!@brief Flash Pad Definitions
@@ -185,7 +185,7 @@ typedef struct _FlexSPIConfig
     //! details
     uint8_t deviceType;    //!< [0x044-0x044] Device Type:  See Flash Type Definition for more details
     uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal
-    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot
+    uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequency, device specific definitions, See System Boot
     //! Chapter for more details
     uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot
     //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH
@@ -253,7 +253,7 @@ typedef struct _flexspi_nor_config
     uint8_t serialNorType;          //!< Serial NOR Flash type: 0/1/2/3
     uint8_t needExitNoCmdMode;      //!< Need to exit NoCmd mode before other IP command
     uint8_t halfClkForNonReadCmd;   //!< Half the Serial Clock for non-read command: true/false
-    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP commmand execution
+    uint8_t needRestoreNoCmdMode;   //!< Need to Restore NoCmd mode after IP command execution
     uint32_t blockSize;             //!< Block size
     uint32_t reserve2[11];          //!< Reserved for future use
 } flexspi_nor_config_t;
diff --git a/hw/bsp/imxrt/debug.jlinkscript b/hw/bsp/imxrt/debug.jlinkscript
new file mode 100644
index 000000000..fd8bcffef
--- /dev/null
+++ b/hw/bsp/imxrt/debug.jlinkscript
@@ -0,0 +1,5 @@
+int SetupTarget(void) {
+  JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x40000");
+
+  return 0;
+}
diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c
index fc6e9e266..8ed72aa19 100644
--- a/hw/bsp/imxrt/family.c
+++ b/hw/bsp/imxrt/family.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2018, hathach (tinyusb.org)
@@ -24,15 +24,26 @@
  * This file is part of the TinyUSB stack.
  */
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
+#include "board/clock_config.h"
+#include "board/pin_mux.h"
 #include "board.h"
+
+// Suppress warning caused by mcu driver
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
 #include "fsl_device_registers.h"
 #include "fsl_gpio.h"
 #include "fsl_iomuxc.h"
 #include "fsl_clock.h"
 #include "fsl_lpuart.h"
 
-#include "clock_config.h"
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
 
 #if defined(BOARD_TUD_RHPORT) && CFG_TUD_ENABLED
   #define PORT_SUPPORT_DEVICE(_n)  (BOARD_TUD_RHPORT == _n)
@@ -47,24 +58,69 @@
 #endif
 
 // needed by fsl_flexspi_nor_boot
-const uint8_t dcd_data[] = { 0x00 };
+TU_ATTR_USED const uint8_t dcd_data[] = { 0x00 };
 
 //--------------------------------------------------------------------+
 //
 //--------------------------------------------------------------------+
 
+// unify naming convention
+#if !defined(USBPHY1) && defined(USBPHY)
+  #define USBPHY1 USBPHY
+#endif
+
+static void init_usb_phy(uint8_t usb_id) {
+  USBPHY_Type* usb_phy;
+
+  if (usb_id == 0) {
+    usb_phy = USBPHY1;
+    CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, BOARD_XTAL0_CLK_HZ);
+    CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, BOARD_XTAL0_CLK_HZ);
+  }
+  #ifdef USBPHY2
+  else if (usb_id == 1) {
+    usb_phy = USBPHY2;
+    CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, BOARD_XTAL0_CLK_HZ);
+    CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, BOARD_XTAL0_CLK_HZ);
+  }
+  #endif
+  else {
+    return;
+  }
+
+  // Enable PHY support for Low speed device + LS via FS Hub
+  usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
+
+  // Enable all power for normal operation
+  // TODO may not be needed since it is called within CLOCK_EnableUsbhs0PhyPllClock()
+  usb_phy->PWD = 0;
+
+  // TX Timing
+  uint32_t phytx = usb_phy->TX;
+  phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
+  phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
+  usb_phy->TX = phytx;
+}
+
 void board_init(void)
 {
-  // Init clock
+  // make sure the dcache is on.
+#if defined(__DCACHE_PRESENT) && __DCACHE_PRESENT
+  if (SCB_CCR_DC_Msk != (SCB_CCR_DC_Msk & SCB->CCR)) SCB_EnableDCache();
+#endif
+
+  BOARD_InitPins();
   BOARD_BootClockRUN();
   SystemCoreClockUpdate();
 
-  // Enable IOCON clock
-  CLOCK_EnableClock(kCLOCK_Iomuxc);
+#ifdef TRACE_ETM
+  //CLOCK_EnableClock(kCLOCK_Trace);
+#endif
 
 #if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
+
 #elif CFG_TUSB_OS == OPT_OS_FREERTOS
   // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
   NVIC_SetPriority(USB_OTG1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
@@ -73,115 +129,48 @@ void board_init(void)
 #endif
 #endif
 
-  // LED
-  IOMUXC_SetPinMux( LED_PINMUX, 0U);
-  IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
-
-  gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
-  GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
   board_led_write(true);
 
-  // Button
-  IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
-  IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U);
-  gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
-  GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
-
   // UART
-  IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
-  IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
-  IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
-  IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
-
   lpuart_config_t uart_config;
   LPUART_GetDefaultConfig(&uart_config);
   uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
   uart_config.enableTx = true;
   uart_config.enableRx = true;
 
-  uint32_t freq;
-  if (CLOCK_GetMux(kCLOCK_UartMux) == 0) /* PLL3 div6 80M */
-  {
-    freq = (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
+  if ( kStatus_Success != LPUART_Init(UART_PORT, &uart_config, UART_CLK_ROOT) ) {
+    // failed to init uart, probably baudrate is not supported
+    // TU_BREAKPOINT();
   }
-  else
-  {
-    freq = CLOCK_GetOscFreq() / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U);
-  }
-
-  LPUART_Init(UART_PORT, &uart_config, freq);
 
-  //------------- USB0 -------------//
-
-  // Clock
-  CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
-  CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
-
-  USBPHY_Type* usb_phy;
-
-  // RT105x RT106x have dual USB controller.
-#ifdef USBPHY1
-  usb_phy = USBPHY1;
-#else
-  usb_phy = USBPHY;
-#endif
-
-  // Enable PHY support for Low speed device + LS via FS Hub
-  usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
-
-  // Enable all power for normal operation
-  usb_phy->PWD = 0;
-
-  // TX Timing
-  uint32_t phytx = usb_phy->TX;
-  phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
-  phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
-  usb_phy->TX = phytx;
-
-  // RT105x RT106x have dual USB controller.
+  //------------- USB -------------//
+  // Note: RT105x RT106x and later have dual USB controllers.
+  init_usb_phy(0); // USB0
 #ifdef USBPHY2
-  // USB1
-  CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
-  CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U);
-
-  usb_phy = USBPHY2;
-
-  // Enable PHY support for Low speed device + LS via FS Hub
-  usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
-
-  // Enable all power for normal operation
-  usb_phy->PWD = 0;
-
-  // TX Timing
-  phytx = usb_phy->TX;
-  phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
-  phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
-  usb_phy->TX = phytx;
+  init_usb_phy(1); // USB1
 #endif
 }
 
 //--------------------------------------------------------------------+
 // USB Interrupt Handler
 //--------------------------------------------------------------------+
-void USB_OTG1_IRQHandler(void)
-{
+void USB_OTG1_IRQHandler(void) {
   #if PORT_SUPPORT_DEVICE(0)
-    tud_int_handler(0);
+  tud_int_handler(0);
   #endif
 
   #if PORT_SUPPORT_HOST(0)
-    tuh_int_handler(0);
+  tuh_int_handler(0, true);
   #endif
 }
 
-void USB_OTG2_IRQHandler(void)
-{
+void USB_OTG2_IRQHandler(void) {
   #if PORT_SUPPORT_DEVICE(1)
-    tud_int_handler(1);
+  tud_int_handler(1);
   #endif
 
   #if PORT_SUPPORT_HOST(1)
-    tuh_int_handler(1);
+  tuh_int_handler(1, true);
   #endif
 }
 
@@ -189,38 +178,49 @@ void USB_OTG2_IRQHandler(void)
 // Board porting API
 //--------------------------------------------------------------------+
 
-void board_led_write(bool state)
-{
-  GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
+void board_led_write(bool state) {
+  GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
 }
 
-uint32_t board_button_read(void)
-{
-  // active low
+uint32_t board_button_read(void) {
   return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
 }
 
-int board_uart_read(uint8_t* buf, int len)
-{
-  LPUART_ReadBlocking(UART_PORT, buf, len);
-  return len;
+int board_uart_read(uint8_t* buf, int len) {
+  int count = 0;
+
+  while (count < len) {
+    uint8_t const rx_count = LPUART_GetRxFifoCount(UART_PORT);
+    if (!rx_count) {
+      // clear all error flag if any
+      uint32_t status_flags = LPUART_GetStatusFlags(UART_PORT);
+      status_flags &= (kLPUART_RxOverrunFlag | kLPUART_ParityErrorFlag | kLPUART_FramingErrorFlag |
+                       kLPUART_NoiseErrorFlag);
+      LPUART_ClearStatusFlags(UART_PORT, status_flags);
+      break;
+    }
+
+    for (int i = 0; i < rx_count; i++) {
+      buf[count] = LPUART_ReadByte(UART_PORT);
+      count++;
+    }
+  }
+
+  return count;
 }
 
-int board_uart_write(void const * buf, int len)
-{
+int board_uart_write(void const * buf, int len) {
   LPUART_WriteBlocking(UART_PORT, (uint8_t const*)buf, len);
   return len;
 }
 
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
-{
+void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void)
-{
+uint32_t board_millis(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake
new file mode 100644
index 000000000..090014754
--- /dev/null
+++ b/hw/bsp/imxrt/family.cmake
@@ -0,0 +1,143 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk)
+set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+set(MCU_VARIANT_WITH_CORE ${MCU_VARIANT}${MCU_CORE})
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  add_library(${BOARD_TARGET} STATIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/clock_config.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/pin_mux.c
+    ${SDK_DIR}/drivers/common/fsl_common.c
+    ${SDK_DIR}/drivers/common/fsl_common_arm.c
+    ${SDK_DIR}/drivers/igpio/fsl_gpio.c
+    ${SDK_DIR}/drivers/lpspi/fsl_lpspi.c
+    ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT_WITH_CORE}.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
+    )
+
+  # Optional drivers: only available for some mcus: rt1160, rt1170
+  set(OPTIONAL_DRIVER fsl_dcdc.c fsl_pmu.c fsl_anatop_ai.c)
+  foreach(FILE IN LISTS OPTIONAL_DRIVER)
+    if(EXISTS ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/${FILE})
+      target_sources(${BOARD_TARGET} PRIVATE ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/${FILE})
+    endif()
+  endforeach()
+
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    __ARMVFP__=0
+    __ARMFPV5__=0
+    XIP_EXTERNAL_FLASH=1
+    XIP_BOOT_HEADER_ENABLE=1
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board
+    ${CMSIS_DIR}/CMSIS/Core/Include
+    ${SDK_DIR}/devices/${MCU_VARIANT}
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+    #${SDK_DIR}/drivers/adc_12b1msps_sar
+    ${SDK_DIR}/drivers/common
+    ${SDK_DIR}/drivers/igpio
+    ${SDK_DIR}/drivers/lpspi
+    ${SDK_DIR}/drivers/lpuart
+    )
+
+  update_board(${BOARD_TARGET})
+
+  # LD_FILE and STARTUP_FILE can be defined in board.cmake
+  if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
+    set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx${MCU_CORE}_flexspi_nor.ld)
+    #set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld)
+  endif ()
+
+  if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID})
+    set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT_WITH_CORE}.S)
+    #set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT_WITH_CORE}.S)
+  endif ()
+
+  target_sources(${BOARD_TARGET} PUBLIC
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      # nanolib
+      --specs=nosys.specs
+      --specs=nano.specs
+      # force linker to look for these symbols
+      -Wl,-uimage_vector_table
+      -Wl,-ug_boot_data
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX ${RTOS})
+  target_sources(${TARGET}-tinyusb PRIVATE
+    ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c
+    ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c
+    ${TOP}/src/portable/ehci/ehci.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_jlink(${TARGET})
+  #family_flash_nxplink(${TARGET})
+  #family_flash_pyocd(${TARGET})
+endfunction()
diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk
index 846ecd255..c6adcba5a 100644
--- a/hw/bsp/imxrt/family.mk
+++ b/hw/bsp/imxrt/family.mk
@@ -1,23 +1,24 @@
 UF2_FAMILY_ID = 0x4fb2d5bd
 SDK_DIR = hw/mcu/nxp/mcux-sdk
-DEPS_SUBMODULES += $(SDK_DIR)
+DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
 
 include $(TOP)/$(BOARD_PATH)/board.mk
 
+CPU_CORE ?= cortex-m7
+MCU_VARIANT_WITH_CORE = ${MCU_VARIANT}${MCU_CORE}
+MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT)
+
 CFLAGS += \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m7 \
-  -mfloat-abi=hard \
-  -mfpu=fpv5-d16 \
-  -D__ARMVFP__=0 -D__ARMFPV5__=0\
+  -D__ARMVFP__=0 \
+  -D__ARMFPV5__=0 \
   -DXIP_EXTERNAL_FLASH=1 \
   -DXIP_BOOT_HEADER_ENABLE=1 \
-  -DCFG_TUSB_MCU=OPT_MCU_MIMXRT
+  -DCFG_TUSB_MCU=OPT_MCU_MIMXRT1XXX
 
 ifdef BOARD_TUD_RHPORT
 CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT)
 endif
+
 ifdef BOARD_TUH_RHPORT
 CFLAGS += -DBOARD_TUH_RHPORT=$(BOARD_TUH_RHPORT)
 endif
@@ -25,12 +26,12 @@ endif
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough -Wno-error=redundant-decls
 
-MCU_DIR = $(SDK_DIR)/devices/$(MCU_VARIANT)
+LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs
 
 # All source paths should be relative to the top level.
-LD_FILE = $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx_flexspi_nor.ld
+LD_FILE ?= $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx${MCU_CORE}_flexspi_nor.ld
 
-# TODO for net_lwip_webserver exmaple, but may not needed !! 
+# TODO for net_lwip_webserver example, but may not needed !!
 LDFLAGS += \
 	-Wl,--defsym,__stack_size__=0x800 \
 
@@ -38,17 +39,27 @@ SRC_C += \
 	src/portable/chipidea/ci_hs/dcd_ci_hs.c \
 	src/portable/chipidea/ci_hs/hcd_ci_hs.c \
 	src/portable/ehci/ehci.c \
-	$(MCU_DIR)/system_$(MCU_VARIANT).c \
+	${BOARD_PATH}/board/clock_config.c \
+	${BOARD_PATH}/board/pin_mux.c \
+	$(MCU_DIR)/system_$(MCU_VARIANT_WITH_CORE).c \
 	$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
-	$(MCU_DIR)/project_template/clock_config.c \
 	$(MCU_DIR)/drivers/fsl_clock.c \
 	$(SDK_DIR)/drivers/common/fsl_common.c \
+	$(SDK_DIR)/drivers/common/fsl_common_arm.c \
 	$(SDK_DIR)/drivers/igpio/fsl_gpio.c \
 	$(SDK_DIR)/drivers/lpuart/fsl_lpuart.c
 
+# Optional drivers: only available for some mcus: rt1160, rt1170
+ifneq (,$(wildcard ${TOP}/${MCU_DIR}/drivers/fsl_dcdc.c))
+SRC_C += \
+  ${MCU_DIR}/drivers/fsl_dcdc.c \
+  ${MCU_DIR}/drivers/fsl_pmu.c \
+  ${MCU_DIR}/drivers/fsl_anatop_ai.c
+endif
+
 INC += \
 	$(TOP)/$(BOARD_PATH) \
-	$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
+	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
 	$(TOP)/$(MCU_DIR) \
 	$(TOP)/$(MCU_DIR)/project_template \
 	$(TOP)/$(MCU_DIR)/drivers \
@@ -56,8 +67,11 @@ INC += \
 	$(TOP)/$(SDK_DIR)/drivers/igpio \
 	$(TOP)/$(SDK_DIR)/drivers/lpuart
 
-SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S
-
-# For freeRTOS port source
-FREERTOS_PORT = ARM_CM7/r0p1
+SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT_WITH_CORE).S
 
+# UF2 generation, iMXRT need to strip to text only before conversion
+APPLICATION_ADDR = 0x6000C000
+$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).elf
+	@echo CREATE $@
+	@$(OBJCOPY) -O binary -R .flash_config -R .ivt $^ $(BUILD)/$(PROJECT)-textonly.bin
+	$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b $(APPLICATION_ADDR) -c -o $@ $(BUILD)/$(PROJECT)-textonly.bin