Merge remote-tracking branch 'upstream/master' into pr/1702

9 files changed, 956 insertions, 0 deletions

diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..8cd3ee3d8
--- /dev/null
+++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,149 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "chip.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       5
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.cmake b/hw/bsp/lpc40/boards/ea4088_quickstart/board.cmake
new file mode 100644
index 000000000..7f281d5f6
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.cmake
@@ -0,0 +1,9 @@
+set(JLINK_DEVICE LPC4088)
+set(PYOCD_TARGET LPC4088)
+set(NXPLINK_DEVICE LPC4088:LPC4088)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc4088.ld)
+
+function(update_board TARGET)
+  # nothing to do
+endfunction()
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.h b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h
new file mode 100644
index 000000000..d5489c154
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h
@@ -0,0 +1,74 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef EA4088QS__BOARD_H
+#define EA4088QS__BOARD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED_PORT      2
+#define LED_PIN       19
+
+#define BUTTON_PORT   2
+#define BUTTON_PIN    10
+#define BUTTON_ACTIV_STATE 0
+
+/* System oscillator rate and RTC oscillator rate */
+const uint32_t OscRateIn = 12000000;
+const uint32_t RTCOscRateIn = 32768;
+
+/* Pin muxing configuration */
+static const PINMUX_GRP_T pinmuxing[] = {
+    // LED
+    { 2, 19, (IOCON_FUNC0 | IOCON_MODE_INACT) },
+
+    // Button
+    { 2, 10, (IOCON_FUNC0 | IOCON_MODE_INACT | IOCON_MODE_PULLUP) },
+
+    // USB1 as Host
+    { 0, 29, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // D+1
+    { 0, 30, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // D-1
+    { 1, 18, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // UP LED1
+    { 1, 19, (IOCON_FUNC2 | IOCON_MODE_INACT) }, // PPWR1
+//  {2, 14, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // VBUS1
+//  {2, 15, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // OVRCR1
+
+    // USB2 as Device
+    { 0, 31, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // D+2
+    { 0, 13, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // UP LED
+    { 0, 14, (IOCON_FUNC3 | IOCON_MODE_INACT) }, // CONNECT2
+
+    /* VBUS is not connected on this board, so leave the pin at default setting. */
+    /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.mk b/hw/bsp/lpc40/boards/ea4088_quickstart/board.mk
new file mode 100644
index 000000000..d0bb4fe8c
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.mk
@@ -0,0 +1,8 @@
+
+LD_FILE = $(BOARD_PATH)/lpc4088.ld
+
+# For flash-jlink target
+JLINK_DEVICE = LPC4088
+
+# flash using jlink
+flash: flash-jlink
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld b/hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld
new file mode 100644
index 000000000..5897707f6
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld
@@ -0,0 +1,184 @@
+/*
+ * GENERATED FILE - DO NOT EDIT
+ * (c) Code Red Technologies Ltd, 2008-2013
+ * (c) NXP Semiconductors 2013-2019
+ * Generated linker script file for LPC4088
+ * Created from linkscript.ldt by FMCreateLinkLibraries
+ * Using Freemarker v2.3.23
+ * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 5:16:07 PM
+ */
+
+MEMORY
+{
+  /* Define each memory region */
+  MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */
+  RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */
+  RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */
+}
+
+  /* Define a symbol for the top of each memory region */
+  __base_MFlash512 = 0x0  ; /* MFlash512 */
+  __base_Flash = 0x0 ; /* Flash */
+  __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */
+  __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */
+  __base_RamLoc64 = 0x10000000  ; /* RamLoc64 */
+  __base_RAM = 0x10000000 ; /* RAM */
+  __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */
+  __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */
+  __base_RamPeriph32 = 0x20000000  ; /* RamPeriph32 */
+  __base_RAM2 = 0x20000000 ; /* RAM2 */
+  __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */
+  __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */
+
+ENTRY(ResetISR)
+
+SECTIONS
+{
+    /* MAIN TEXT SECTION */
+    .text : ALIGN(4)
+    {
+        FILL(0xff)
+        __vectors_start__ = ABSOLUTE(.) ;
+        KEEP(*(.isr_vector))
+        /* Global Section Table */
+        . = ALIGN(4) ;
+        __section_table_start = .;
+        __data_section_table = .;
+        LONG(LOADADDR(.data));
+        LONG(    ADDR(.data));
+        LONG(  SIZEOF(.data));
+        LONG(LOADADDR(.data_RAM2));
+        LONG(    ADDR(.data_RAM2));
+        LONG(  SIZEOF(.data_RAM2));
+        __data_section_table_end = .;
+        __bss_section_table = .;
+        LONG(    ADDR(.bss));
+        LONG(  SIZEOF(.bss));
+        LONG(    ADDR(.bss_RAM2));
+        LONG(  SIZEOF(.bss_RAM2));
+        __bss_section_table_end = .;
+        __section_table_end = . ;
+        /* End of Global Section Table */
+
+        *(.after_vectors*)
+
+    } > MFlash512
+
+    .text : ALIGN(4)
+    {
+       *(.text*)
+       *(.rodata .rodata.* .constdata .constdata.*)
+       . = ALIGN(4);
+    } > MFlash512
+    /*
+     * for exception handling/unwind - some Newlib functions (in common
+     * with C++ and STDC++) use this.
+     */
+    .ARM.extab : ALIGN(4)
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > MFlash512
+
+    __exidx_start = .;
+
+    .ARM.exidx : ALIGN(4)
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > MFlash512
+    __exidx_end = .;
+
+    _etext = .;
+
+    /* DATA section for RamPeriph32 */
+
+    .data_RAM2 : ALIGN(4)
+    {
+        FILL(0xff)
+        PROVIDE(__start_data_RAM2 = .) ;
+        *(.ramfunc.$RAM2)
+        *(.ramfunc.$RamPeriph32)
+        *(.data.$RAM2*)
+        *(.data.$RamPeriph32*)
+        . = ALIGN(4) ;
+        PROVIDE(__end_data_RAM2 = .) ;
+     } > RamPeriph32 AT>MFlash512
+    /* MAIN DATA SECTION */
+    .uninit_RESERVED : ALIGN(4)
+    {
+        KEEP(*(.bss.$RESERVED*))
+        . = ALIGN(4) ;
+        _end_uninit_RESERVED = .;
+    } > RamLoc64
+
+    /* Main DATA section (RamLoc64) */
+    .data : ALIGN(4)
+    {
+       FILL(0xff)
+       _data = . ;
+       *(vtable)
+       *(.ramfunc*)
+       *(.data*)
+       . = ALIGN(4) ;
+       _edata = . ;
+    } > RamLoc64 AT>MFlash512
+
+    /* BSS section for RamPeriph32 */
+    .bss_RAM2 : ALIGN(4)
+    {
+       PROVIDE(__start_bss_RAM2 = .) ;
+       *(.bss.$RAM2*)
+       *(.bss.$RamPeriph32*)
+       . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */
+       PROVIDE(__end_bss_RAM2 = .) ;
+    } > RamPeriph32
+
+    /* MAIN BSS SECTION */
+    .bss : ALIGN(4)
+    {
+        _bss = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4) ;
+        _ebss = .;
+        PROVIDE(end = .);
+    } > RamLoc64
+
+    /* NOINIT section for RamPeriph32 */
+    .noinit_RAM2 (NOLOAD) : ALIGN(4)
+    {
+       *(.noinit.$RAM2*)
+       *(.noinit.$RamPeriph32*)
+       . = ALIGN(4) ;
+    } > RamPeriph32
+
+    /* DEFAULT NOINIT SECTION */
+    .noinit (NOLOAD): ALIGN(4)
+    {
+        _noinit = .;
+        *(.noinit*)
+         . = ALIGN(4) ;
+        _end_noinit = .;
+    } > RamLoc64
+    PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .);
+    PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc64 - 0);
+
+    /* ## Create checksum value (used in startup) ## */
+    PROVIDE(__valid_user_code_checksum = 0 -
+                                         (_vStackTop
+                                         + (ResetISR + 1)
+                                         + (NMI_Handler + 1)
+                                         + (HardFault_Handler + 1)
+                                         + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1)   /* MemManage_Handler may not be defined */
+                                         + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1)     /* BusFault_Handler may not be defined */
+                                         + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */
+                                         ) );
+
+    /* Provide basic symbols giving location and size of main text
+     * block, including initial values of RW data sections. Note that
+     * these will need extending to give a complete picture with
+     * complex images (e.g multiple Flash banks).
+     */
+    _image_start = LOADADDR(.text);
+    _image_end = LOADADDR(.data) + SIZEOF(.data);
+    _image_size = _image_end - _image_start;
+}
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/ozone/ea4088_quickstart.jdebug b/hw/bsp/lpc40/boards/ea4088_quickstart/ozone/ea4088_quickstart.jdebug
new file mode 100644
index 000000000..6aaf1076d
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/ozone/ea4088_quickstart.jdebug
@@ -0,0 +1,238 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  Edit.SysVar (VAR_POWER_SAMPLING_SPEED, FREQ_100_KHZ);
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M4F.svd");
+  Project.AddSvdFile ("../../../../../../../cmsis-svd/data/NXP/LPC408x_7x_v0.7.svd");
+
+  Project.SetDevice ("LPC4088");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("50 MHz");
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  // User settings
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ea4088-quickstart/cdc_msc.elf");
+}
+
+/*********************************************************************
+*
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging a RAM program on a Cortex-M target device
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  Exec.Reset();
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//
+//    Util.Log("Resetting Program.");
+//
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}
diff --git a/hw/bsp/lpc40/family.c b/hw/bsp/lpc40/family.c
new file mode 100644
index 000000000..d6c8ef32a
--- /dev/null
+++ b/hw/bsp/lpc40/family.c
@@ -0,0 +1,157 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "chip.h"
+#include "bsp/board_api.h"
+#include "board.h"
+
+//--------------------------------------------------------------------+
+// USB Interrupt Handler
+//--------------------------------------------------------------------+
+void USB_IRQHandler(void) {
+  #if CFG_TUD_ENABLED
+  tud_int_handler(0);
+  #endif
+
+  #if CFG_TUH_ENABLED
+  tuh_int_handler(0, true);
+  #endif
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM DECLARATION
+//--------------------------------------------------------------------+
+
+// Invoked by startup code
+void SystemInit(void) {
+#ifdef __USE_LPCOPEN
+  extern void (*const g_pfnVectors[])(void);
+  unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08;
+  *pSCB_VTOR = (unsigned int) g_pfnVectors;
+
+  #if __FPU_USED == 1
+  fpuInit();
+  #endif
+#endif // __USE_LPCOPEN
+
+  Chip_IOCON_Init(LPC_IOCON);
+  Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
+
+#ifdef TRACE_ETM
+  const PINMUX_GRP_T trace_pinmux[] = {
+      {2, 2, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 3, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 4, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 5, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 6, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+  };
+  Chip_IOCON_SetPinMuxing(LPC_IOCON, trace_pinmux, sizeof(trace_pinmux) / sizeof(PINMUX_GRP_T));
+#endif
+
+  /* CPU clock source starts with IRC */
+  /* Enable PBOOST for CPU clock over 100MHz */
+  Chip_SYSCTL_EnableBoost();
+
+  Chip_SetupXtalClocking();
+}
+
+void board_init(void) {
+  SystemCoreClockUpdate();
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+  Chip_GPIO_Init(LPC_GPIO);
+
+  // LED
+  Chip_GPIO_SetPinDIROutput(LPC_GPIO, LED_PORT, LED_PIN);
+
+  // Button
+  Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
+
+  // UART
+
+  //------------- USB -------------//
+
+  // Port1 as Host, Port2: Device
+  Chip_USB_Init();
+
+  enum {
+    USBCLK_DEVCIE = 0x12, // AHB + Device
+    USBCLK_HOST = 0x19,  // AHB + OTG + Host
+    USBCLK_ALL = 0x1B    // Host + Device + OTG + AHB
+  };
+
+  LPC_USB->OTGClkCtrl = USBCLK_ALL;
+  while ( (LPC_USB->OTGClkSt & USBCLK_ALL) != USBCLK_ALL ) {}
+
+  // set portfunc: USB1 = host, USB2 = device
+  LPC_USB->StCtrl = 0x3;
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state) {
+  Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state);
+}
+
+uint32_t board_button_read(void) {
+  return BUTTON_ACTIV_STATE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
+}
+
+int board_uart_read(uint8_t *buf, int len) {
+  //return UART_ReceiveByte(BOARD_UART_PORT);
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+int board_uart_write(void const *buf, int len) {
+  //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+#endif
diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake
new file mode 100644
index 000000000..fce9772b6
--- /dev/null
+++ b/hw/bsp/lpc40/family.cmake
@@ -0,0 +1,102 @@
+include_guard()
+
+set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS LPC18XX CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  add_library(${BOARD_TARGET} STATIC
+    ${SDK_DIR}/../gcc/cr_startup_lpc40xx.c
+    ${SDK_DIR}/src/chip_17xx_40xx.c
+    ${SDK_DIR}/src/clock_17xx_40xx.c
+    ${SDK_DIR}/src/fpu_init.c
+    ${SDK_DIR}/src/gpio_17xx_40xx.c
+    ${SDK_DIR}/src/iocon_17xx_40xx.c
+    ${SDK_DIR}/src/sysctl_17xx_40xx.c
+    ${SDK_DIR}/src/sysinit_17xx_40xx.c
+    ${SDK_DIR}/src/uart_17xx_40xx.c
+    )
+  target_compile_options(${BOARD_TARGET} PUBLIC
+    -nostdlib
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    __USE_LPCOPEN
+    CORE_M4
+    CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\".data.$RAM2\"\)\)\)
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${SDK_DIR}/inc
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      # nanolib
+      --specs=nosys.specs
+      --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
+    ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c
+    ${TOP}/src/portable/ohci/ohci.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_jlink(${TARGET})
+  #family_flash_nxplink(${TARGET})
+endfunction()
diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk
new file mode 100644
index 000000000..fa76789e3
--- /dev/null
+++ b/hw/bsp/lpc40/family.mk
@@ -0,0 +1,35 @@
+DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
+
+MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx
+include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
+
+CFLAGS += \
+  -flto \
+  -nostdlib \
+  -DCORE_M4 \
+  -D__USE_LPCOPEN \
+  -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
+  -DCFG_TUSB_MCU=OPT_MCU_LPC40XX
+
+# mcu driver cause following warnings
+CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual
+
+LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs
+
+# All source paths should be relative to the top level.
+SRC_C += \
+	src/portable/nxp/lpc17_40/dcd_lpc17_40.c \
+	$(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \
+	$(MCU_DIR)/src/chip_17xx_40xx.c \
+	$(MCU_DIR)/src/clock_17xx_40xx.c \
+	$(MCU_DIR)/src/fpu_init.c \
+	$(MCU_DIR)/src/gpio_17xx_40xx.c \
+	$(MCU_DIR)/src/iocon_17xx_40xx.c \
+	$(MCU_DIR)/src/sysctl_17xx_40xx.c \
+	$(MCU_DIR)/src/sysinit_17xx_40xx.c \
+	$(MCU_DIR)/src/uart_17xx_40xx.c \
+
+INC += \
+	$(TOP)/$(MCU_DIR)/inc \
+	$(TOP)/$(BOARD_PATH)