Merge branch 'master' into pr/2181

19 files changed, 1898 insertions, 112 deletions

diff --git a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h
index b1cef793e..5bf990bab 100644
--- a/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h
+++ b/hw/bsp/mcx/FreeRTOSConfig/FreeRTOSConfig.h
@@ -49,7 +49,11 @@
 
 /* Cortex M23/M33 port configuration. */
 #define configENABLE_MPU                        0
-#define configENABLE_FPU                        1
+#if defined(__ARM_FP) && __ARM_FP >= 4
+  #define configENABLE_FPU                      1
+#else
+  #define configENABLE_FPU                      0
+#endif
 #define configENABLE_TRUSTZONE                  0
 #define configMINIMAL_SECURE_STACK_SIZE         (1024)
 
@@ -66,21 +70,22 @@
 #define configUSE_MUTEXES                       1
 #define configUSE_RECURSIVE_MUTEXES             1
 #define configUSE_COUNTING_SEMAPHORES           1
-#define configQUEUE_REGISTRY_SIZE               2
+#define configQUEUE_REGISTRY_SIZE               4
 #define configUSE_QUEUE_SETS                    0
 #define configUSE_TIME_SLICING                  0
 #define configUSE_NEWLIB_REENTRANT              0
 #define configENABLE_BACKWARD_COMPATIBILITY     1
 #define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
 
-#define configSUPPORT_STATIC_ALLOCATION         0
-#define configSUPPORT_DYNAMIC_ALLOCATION        1
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
 
 /* Hook function related definitions. */
 #define configUSE_IDLE_HOOK                    0
 #define configUSE_TICK_HOOK                    0
 #define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
 #define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
 
 /* Run time and task stats gathering related definitions. */
 #define configGENERATE_RUN_TIME_STATS          0
@@ -116,23 +121,6 @@
 #define INCLUDE_xEventGroupSetBitFromISR       0
 #define INCLUDE_xTimerPendFunctionCall         0
 
-/* Define to trap errors during development. */
-// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
-#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
-  #define configASSERT(_exp) \
-    do {\
-      if ( !(_exp) ) { \
-        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
-        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
-          taskDISABLE_INTERRUPTS(); \
-           __asm("BKPT #0\n"); \
-        }\
-      }\
-    } while(0)
-#else
-  #define configASSERT( x )
-#endif
-
 /* FreeRTOS hooks to NVIC vectors */
 #define xPortPendSVHandler    PendSV_Handler
 #define xPortSysTickHandler   SysTick_Handler
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake
new file mode 100644
index 000000000..7cd8991e6
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake
@@ -0,0 +1,21 @@
+set(MCU_VARIANT MCXA153)
+set(MCU_CORE MCXA153)
+
+set(JLINK_DEVICE MCXA153_M33)
+set(PYOCD_TARGET MCXA153)
+set(NXPLINK_DEVICE MCXA153:MCXA153)
+
+set(PORT 0)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MCXA153VLH
+    BOARD_TUD_RHPORT=0
+    BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c
+    )
+endfunction()
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.h b/hw/bsp/mcx/boards/frdm_mcxa153/board.h
new file mode 100644
index 000000000..e207d89d9
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.h
@@ -0,0 +1,64 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LED
+#define LED_GPIO              GPIO3
+#define LED_CLK               kCLOCK_GateGPIO3
+#define LED_PIN               12 // red
+#define LED_STATE_ON          0
+
+// ISP button (Dummy, use unused pin
+#define BUTTON_GPIO           GPIO3
+#define BUTTON_CLK            kCLOCK_GateGPIO3
+#define BUTTON_PIN            29 //sw2
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_DEV              LPUART0
+
+static inline void board_uart_init_clock(void) {
+  /* attach 12 MHz clock to LPUART0 (debug console) */
+  CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u);
+  CLOCK_AttachClk(kFRO12M_to_LPUART0);
+
+  RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn);
+}
+
+// XTAL
+#define XTAL0_CLK_HZ          (24 * 1000 * 1000U)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk
new file mode 100644
index 000000000..af8416d8e
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk
@@ -0,0 +1,14 @@
+MCU_VARIANT = MCXA153
+MCU_CORE = MCXA153
+PORT = 0
+
+CPU_CORE = cortex-m33-nodsp-nofp
+CFLAGS += \
+	-DCPU_MCXA153VLH \
+	-DCFG_TUSB_MCU=OPT_MCU_MCXA15 \
+
+JLINK_DEVICE = MCXA153
+PYOCD_TARGET = MCXA153
+
+# flash using pyocd
+flash: flash-jlink
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c
new file mode 100644
index 000000000..f16bc51f6
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c
@@ -0,0 +1,468 @@
+/*
+ * Copyright 2023 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Setup clock sources.
+ *
+ * 2. Set up wait states of the flash.
+ *
+ * 3. Set up all dividers.
+ *
+ * 4. Set up all selectors to provide selected clocks.
+ *
+ */
+
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v12.0
+processor: MCXA153
+package_id: MCXA153VLH
+mcu_data: ksdk2_0
+processor_version: 0.13.0
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+#include "fsl_clock.h"
+#include "clock_config.h"
+#include "fsl_spc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+/* System clock frequency. */
+//uint32_t SystemCoreClock;
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockFRO96M();
+}
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO12M **********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFRO12M
+outputs:
+- {id: CLK_1M_clock.outFreq, value: 1 MHz}
+- {id: CPU_clock.outFreq, value: 12 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: MAIN_clock.outFreq, value: 12 MHz}
+- {id: Slow_clock.outFreq, value: 3 MHz}
+- {id: System_clock.outFreq, value: 12 MHz}
+settings:
+- {id: SCGMode, value: SIRC}
+- {id: FRO_HF_PERIPHERALS_EN_CFG, value: Disabled}
+- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1}
+- {id: SCG.SCSSEL.sel, value: SCG.SIRC}
+- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+void BOARD_BootClockFRO12M(void)
+{
+    uint32_t coreFreq;
+    spc_active_mode_core_ldo_option_t ldoOption;
+    spc_sram_voltage_config_t sramOption;
+
+    /* Get the CPU Core frequency */
+    coreFreq = CLOCK_GetCoreSysClkFreq();
+
+    /* The flow of increasing voltage and frequency */
+    if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) {
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+    }
+
+    CLOCK_SetupFRO12MClocking();                /*!< Setup FRO12M clock */
+
+    CLOCK_AttachClk(kFRO12M_to_MAIN_CLK);       /* !< Switch MAIN_CLK to FRO12M */
+
+    /* The flow of decreasing voltage and frequency */
+    if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) {
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+    }
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+
+    /*!< Set up dividers */
+    CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U);               /* !< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
+}
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO24M **********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFRO24M
+outputs:
+- {id: CLK_1M_clock.outFreq, value: 1 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: CPU_clock.outFreq, value: 24 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz}
+- {id: FRO_HF_clock.outFreq, value: 48 MHz}
+- {id: MAIN_clock.outFreq, value: 48 MHz}
+- {id: Slow_clock.outFreq, value: 6 MHz}
+- {id: System_clock.outFreq, value: 24 MHz}
+settings:
+- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1}
+- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFRO24M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFRO24M configuration
+ ******************************************************************************/
+void BOARD_BootClockFRO24M(void)
+{
+    uint32_t coreFreq;
+    spc_active_mode_core_ldo_option_t ldoOption;
+    spc_sram_voltage_config_t sramOption;
+
+    /* Get the CPU Core frequency */
+    coreFreq = CLOCK_GetCoreSysClkFreq();
+
+    /* The flow of increasing voltage and frequency */
+    if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) {
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+    }
+
+    CLOCK_SetupFROHFClocking(48000000U);               /*!< Enable FRO HF(48MHz) output */
+
+    CLOCK_SetupFRO12MClocking();                /*!< Setup FRO12M clock */
+
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);       /* !< Switch MAIN_CLK to FRO_HF */
+
+    /* The flow of decreasing voltage and frequency */
+    if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) {
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+    }
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+
+    /*!< Set up dividers */
+    CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U);               /* !< Set AHBCLKDIV divider to value 2 */
+    CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U);           /* !< Set FROHFDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK;
+}
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO48M **********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFRO48M
+outputs:
+- {id: CLK_1M_clock.outFreq, value: 1 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: CPU_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz}
+- {id: FRO_HF_clock.outFreq, value: 48 MHz}
+- {id: MAIN_clock.outFreq, value: 48 MHz}
+- {id: Slow_clock.outFreq, value: 12 MHz}
+- {id: System_clock.outFreq, value: 48 MHz}
+settings:
+- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFRO48M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFRO48M configuration
+ ******************************************************************************/
+void BOARD_BootClockFRO48M(void)
+{
+    uint32_t coreFreq;
+    spc_active_mode_core_ldo_option_t ldoOption;
+    spc_sram_voltage_config_t sramOption;
+
+    /* Get the CPU Core frequency */
+    coreFreq = CLOCK_GetCoreSysClkFreq();
+
+    /* The flow of increasing voltage and frequency */
+    if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) {
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+    }
+
+    CLOCK_SetupFROHFClocking(48000000U);               /*!< Enable FRO HF(48MHz) output */
+
+    CLOCK_SetupFRO12MClocking();                /*!< Setup FRO12M clock */
+
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);       /* !< Switch MAIN_CLK to FRO_HF */
+
+    /* The flow of decreasing voltage and frequency */
+    if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) {
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P0V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+    }
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+
+    /*!< Set up dividers */
+    CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U);               /* !< Set AHBCLKDIV divider to value 1 */
+    CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U);           /* !< Set FROHFDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK;
+}
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO64M **********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFRO64M
+outputs:
+- {id: CLK_1M_clock.outFreq, value: 1 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: CPU_clock.outFreq, value: 64 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz}
+- {id: FRO_HF_clock.outFreq, value: 64 MHz}
+- {id: MAIN_clock.outFreq, value: 64 MHz}
+- {id: Slow_clock.outFreq, value: 16 MHz}
+- {id: System_clock.outFreq, value: 64 MHz}
+settings:
+- {id: VDD_CORE, value: voltage_1v1}
+- {id: MRCC.FROHFDIV.scale, value: '1', locked: true}
+- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1}
+- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true}
+sources:
+- {id: SCG.FIRC.outFreq, value: 64 MHz}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFRO64M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFRO64M configuration
+ ******************************************************************************/
+void BOARD_BootClockFRO64M(void)
+{
+    uint32_t coreFreq;
+    spc_active_mode_core_ldo_option_t ldoOption;
+    spc_sram_voltage_config_t sramOption;
+
+    /* Get the CPU Core frequency */
+    coreFreq = CLOCK_GetCoreSysClkFreq();
+
+    /* The flow of increasing voltage and frequency */
+    if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) {
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P1V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+    }
+
+    CLOCK_SetupFROHFClocking(64000000U);               /*!< Enable FRO HF(64MHz) output */
+
+    CLOCK_SetupFRO12MClocking();                /*!< Setup FRO12M clock */
+
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);       /* !< Switch MAIN_CLK to FRO_HF */
+
+    /* The flow of decreasing voltage and frequency */
+    if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) {
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P1V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+    }
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+
+    /*!< Set up dividers */
+    CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U);               /* !< Set AHBCLKDIV divider to value 1 */
+    CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U);           /* !< Set FROHFDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK;
+}
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO96M **********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFRO96M
+called_from_default_init: true
+outputs:
+- {id: CLK_1M_clock.outFreq, value: 1 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: CPU_clock.outFreq, value: 96 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz}
+- {id: FRO_HF_clock.outFreq, value: 96 MHz}
+- {id: MAIN_clock.outFreq, value: 96 MHz}
+- {id: Slow_clock.outFreq, value: 24 MHz}
+- {id: System_clock.outFreq, value: 96 MHz}
+settings:
+- {id: VDD_CORE, value: voltage_1v1}
+- {id: CLKOUTDIV_HALT, value: Enable}
+- {id: MRCC.FROHFDIV.scale, value: '1', locked: true}
+- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1}
+- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true}
+sources:
+- {id: SCG.FIRC.outFreq, value: 96 MHz}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFRO96M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFRO96M configuration
+ ******************************************************************************/
+void BOARD_BootClockFRO96M(void)
+{
+    uint32_t coreFreq;
+    spc_active_mode_core_ldo_option_t ldoOption;
+    spc_sram_voltage_config_t sramOption;
+
+    /* Get the CPU Core frequency */
+    coreFreq = CLOCK_GetCoreSysClkFreq();
+
+    /* The flow of increasing voltage and frequency */
+    if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) {
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P1V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+    }
+
+    CLOCK_SetupFROHFClocking(96000000U);               /*!< Enable FRO HF(96MHz) output */
+
+    CLOCK_SetupFRO12MClocking();                /*!< Setup FRO12M clock */
+
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);       /* !< Switch MAIN_CLK to FRO_HF */
+
+    /* The flow of decreasing voltage and frequency */
+    if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) {
+        /* Configure Flash to support different voltage level and frequency */
+        FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U));
+        /* Specifies the operating voltage for the SRAM's read/write timing margin */
+        sramOption.operateVoltage = kSPC_sramOperateAt1P1V;
+        sramOption.requestVoltageUpdate =  true;
+        (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption);
+        /* Set the LDO_CORE VDD regulator level */
+        ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage;
+        ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength;
+        (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption);
+    }
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+
+    /*!< Set up dividers */
+    CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U);               /* !< Set AHBCLKDIV divider to value 1 */
+    CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U);           /* !< Set FROHFDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK;
+}
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h
new file mode 100644
index 000000000..aae811052
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2023 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO12M **********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK           12000000U  /*!< Core clock frequency: 12000000Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFRO12M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO24M **********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFRO24M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK           24000000U  /*!< Core clock frequency: 24000000Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFRO24M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFRO24M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO48M **********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFRO48M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK           48000000U  /*!< Core clock frequency: 48000000Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFRO48M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFRO48M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO64M **********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFRO64M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK           64000000U  /*!< Core clock frequency: 64000000Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFRO64M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFRO64M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO96M **********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFRO96M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK           96000000U  /*!< Core clock frequency: 96000000Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFRO96M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFRO96M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c
new file mode 100644
index 000000000..cc8f56e63
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2023 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v14.0
+processor: MCXA153
+package_id: MCXA153VLH
+mcu_data: ksdk2_0
+processor_version: 0.14.3
+pin_labels:
+- {pin_num: '38', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, label: LED_RED, identifier: LED_RED}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+#include "fsl_common.h"
+#include "fsl_port.h"
+#include "fsl_gpio.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void)
+{
+    BOARD_InitPins();
+}
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'false', slew_rate: fast,
+    open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void)
+{
+    RESET_PeripheralReset(kLPUART0_RST_SHIFT_RSTn);
+    RESET_PeripheralReset(kPORT0_RST_SHIFT_RSTn);
+    CLOCK_SetClockDiv(kCLOCK_DivLPUART0, 1u);
+    CLOCK_AttachClk(kFRO12M_to_LPUART0);
+
+    /* write to PORT0: Peripheral clock is enabled */
+    CLOCK_EnableClock(kCLOCK_GatePORT0);
+
+    /* Write to GPIO3: Peripheral clock is enabled */
+    CLOCK_EnableClock(kCLOCK_GateGPIO3);
+    /* Write to PORT3: Peripheral clock is enabled */
+    CLOCK_EnableClock(kCLOCK_GatePORT3);
+    /* GPIO3 peripheral is released from reset */
+    RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn);
+    /* PORT3 peripheral is released from reset */
+    RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn);
+
+    const port_pin_config_t port3_12_pin38_config = {/* Internal pull-up/down resistor is disabled */
+                                       kPORT_PullDisable,
+                                       /* Low internal pull resistor value is selected. */
+                                       kPORT_LowPullResistor,
+                                       /* Fast slew rate is configured */
+                                       kPORT_FastSlewRate,
+                                       /* Passive input filter is disabled */
+                                       kPORT_PassiveFilterDisable,
+                                       /* Open drain output is disabled */
+                                       kPORT_OpenDrainDisable,
+                                       /* Low drive strength is configured */
+                                       kPORT_LowDriveStrength,
+                                       /* Normal drive strength is configured */
+                                       kPORT_NormalDriveStrength,
+                                       /* Pin is configured as P3_12 */
+                                       kPORT_MuxAlt0,
+                                       /* Digital input enabled */
+                                       kPORT_InputBufferEnable,
+                                       /* Digital input is not inverted */
+                                       kPORT_InputNormal,
+                                       /* Pin Control Register fields [15:0] are not locked */
+                                       kPORT_UnlockRegister};
+    /* PORT3_12 (pin 38) is configured as P3_12 */
+      PORT_SetPinConfig(PORT3, 12U, &port3_12_pin38_config);
+
+    const port_pin_config_t port0_2_pin51_config = {/* Internal pull-up resistor is enabled */
+                                                    kPORT_PullUp,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    kPORT_LowDriveStrength,
+                                                    /* Normal drive strength is configured */
+                                                    kPORT_NormalDriveStrength,
+                                                    /* Pin is configured as LPUART0_RXD */
+                                                    kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    kPORT_UnlockRegister};
+    /* PORT0_2 (pin 51) is configured as LPUART0_RXD */
+    PORT_SetPinConfig(PORT0, 2U, &port0_2_pin51_config);
+
+    const port_pin_config_t port0_3_pin52_config = {/* Internal pull-up resistor is enabled */
+                                                    kPORT_PullUp,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    kPORT_LowDriveStrength,
+                                                    /* Normal drive strength is configured */
+                                                    kPORT_NormalDriveStrength,
+                                                    /* Pin is configured as LPUART0_TXD */
+                                                    kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    kPORT_UnlockRegister};
+    /* PORT0_3 (pin 52) is configured as LPUART0_TXD */
+    PORT_SetPinConfig(PORT0, 3U, &port0_3_pin52_config);
+
+}
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h
new file mode 100644
index 000000000..06b6fdee9
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake b/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake
new file mode 100644
index 000000000..8c3280743
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake
@@ -0,0 +1,21 @@
+set(MCU_VARIANT MCXN947)
+set(MCU_CORE MCXN947_cm33_core0)
+
+set(JLINK_DEVICE MCXN947_M33_0)
+set(PYOCD_TARGET MCXN947)
+set(NXPLINK_DEVICE MCXN947:MCXN947)
+
+set(PORT 1)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    CPU_MCXN947VDF_cm33_core0
+    BOARD_TUD_RHPORT=${PORT}
+    # port 0 is fullspeed, port 1 is highspeed
+    BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    )
+  target_sources(${TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c
+    )
+endfunction()
diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.h b/hw/bsp/mcx/boards/frdm_mcxn947/board.h
new file mode 100644
index 000000000..acb73363f
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.h
@@ -0,0 +1,66 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_GPIO              GPIO0
+#define LED_CLK               kCLOCK_Gpio0
+#define LED_PIN               10 // red
+#define LED_STATE_ON          0
+
+// WAKE button (Dummy, use unused pin
+#define BUTTON_GPIO           GPIO0
+#define BUTTON_CLK            kCLOCK_Gpio0
+#define BUTTON_PIN            23
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_DEV              LPUART4
+
+static inline void board_uart_init_clock(void) {
+  /* attach FRO 12M to FLEXCOMM4 */
+  CLOCK_SetClkDiv(kCLOCK_DivFlexcom4Clk, 1u);
+  CLOCK_AttachClk(kFRO12M_to_FLEXCOMM4);
+  RESET_ClearPeripheralReset(kFC4_RST_SHIFT_RSTn);
+}
+
+//#define UART_RX_PINMUX        0, 24, IOCON_PIO_DIG_FUNC1_EN
+//#define UART_TX_PINMUX        0, 25, IOCON_PIO_DIG_FUNC1_EN
+
+// XTAL
+#define XTAL0_CLK_HZ          (24 * 1000 * 1000U)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.mk b/hw/bsp/mcx/boards/frdm_mcxn947/board.mk
new file mode 100644
index 000000000..22fefd79b
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.mk
@@ -0,0 +1,14 @@
+MCU_VARIANT = MCXN947
+MCU_CORE = MCXN947_cm33_core0
+PORT ?= 1
+
+CPU_CORE = cortex-m33
+CFLAGS += \
+	-DCPU_MCXN947VDF_cm33_core0 \
+	-DCFG_TUSB_MCU=OPT_MCU_MCXN9 \
+
+JLINK_DEVICE = MCXN947_M33_0
+PYOCD_TARGET = MCXN947
+
+# flash using pyocd
+flash: flash-jlink
diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.c
new file mode 100644
index 000000000..37d2b4dfc
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.c
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Setup clock sources.
+ *
+ * 2. Set up wait states of the flash.
+ *
+ * 3. Set up all dividers.
+ *
+ * 4. Set up all selectors to provide selected clocks.
+ *
+ */
+
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v10.0
+processor: MCXN947
+package_id: MCXN947VDF
+mcu_data: ksdk2_0
+processor_version: 0.12.3
+board: MCX-N9XX-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+#include "clock_config.h"
+#include "fsl_clock.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+/* System clock frequency. */
+// extern uint32_t SystemCoreClock;
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockPLL150M();
+}
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO12M **********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFRO12M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: MAIN_clock.outFreq, value: 12 MHz}
+- {id: Slow_clock.outFreq, value: 3 MHz}
+- {id: System_clock.outFreq, value: 12 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: SCGMode, value: SIRC}
+- {id: SCG.SCSSEL.sel, value: SCG.SIRC}
+- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+void BOARD_BootClockFRO12M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kFRO12M_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to FRO12M */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF48M *********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFROHF48M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_clock.outFreq, value: 48 MHz}
+- {id: MAIN_clock.outFreq, value: 48 MHz}
+- {id: Slow_clock.outFreq, value: 12 MHz}
+- {id: System_clock.outFreq, value: 48 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+void BOARD_BootClockFROHF48M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupFROHFClocking(48000000U);                /*!< Enable FRO HF(48MHz) output */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to FRO_HF */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFROHF48M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF144M ********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockFROHF144M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_clock.outFreq, value: 144 MHz}
+- {id: MAIN_clock.outFreq, value: 144 MHz}
+- {id: Slow_clock.outFreq, value: 18 MHz}
+- {id: System_clock.outFreq, value: 72 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: SYSCON.AHBCLKDIV.scale, value: '2', locked: true}
+- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+sources:
+- {id: SCG.FIRC.outFreq, value: 144 MHz}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+void BOARD_BootClockFROHF144M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupFROHFClocking(144000000U);               /*!< Enable FRO HF(144MHz) output */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to FRO_HF */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 2U);           /*!< Set AHBCLKDIV divider to value 2 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKFROHF144M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL150M *********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockPLL150M
+called_from_default_init: true
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: FRO_HF_clock.outFreq, value: 48 MHz}
+- {id: MAIN_clock.outFreq, value: 150 MHz}
+- {id: PLL0_CLK_clock.outFreq, value: 150 MHz}
+- {id: Slow_clock.outFreq, value: 37.5 MHz}
+- {id: System_clock.outFreq, value: 150 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: PLL0_Mode, value: Normal}
+- {id: RunPowerMode, value: OD}
+- {id: SCGMode, value: PLL0}
+- {id: SCG.PLL0M_MULT.scale, value: '50', locked: true}
+- {id: SCG.PLL0SRCSEL.sel, value: SCG.FIRC_48M}
+- {id: SCG.PLL0_NDIV.scale, value: '8', locked: true}
+- {id: SCG.SCSSEL.sel, value: SCG.PLL0_CLK}
+- {id: SYSCON.FLEXCAN0CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FLEXCAN1CLKSEL.sel, value: NO_CLOCK}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+void BOARD_BootClockPLL150M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupFROHFClocking(48000000U);                /*!< Enable FRO HF(48MHz) output */
+
+    /*!< Set up PLL0 */
+    const pll_setup_t pll0Setup = {
+        .pllctrl = SCG_APLLCTRL_SOURCE(1U) | SCG_APLLCTRL_SELI(27U) | SCG_APLLCTRL_SELP(13U),
+        .pllndiv = SCG_APLLNDIV_NDIV(8U),
+        .pllpdiv = SCG_APLLPDIV_PDIV(1U),
+        .pllmdiv = SCG_APLLMDIV_MDIV(50U),
+        .pllRate = 150000000U
+    };
+    CLOCK_SetPLL0Freq(&pll0Setup);                       /*!< Configure PLL0 to the desired values */
+    CLOCK_SetPll0MonitorMode(kSCG_Pll0MonitorDisable);    /* Pll0 Monitor is disabled */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kPLL0_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to PLL0 */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKPLL150M_CORE_CLOCK;
+}
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL100M *********************
+ ******************************************************************************/
+/* clang-format off */
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockPLL100M
+outputs:
+- {id: CLK_144M_clock.outFreq, value: 144 MHz}
+- {id: CLK_48M_clock.outFreq, value: 48 MHz}
+- {id: CLK_IN_clock.outFreq, value: 24 MHz}
+- {id: FRO_12M_clock.outFreq, value: 12 MHz}
+- {id: MAIN_clock.outFreq, value: 100 MHz}
+- {id: PLL1_CLK_clock.outFreq, value: 100 MHz}
+- {id: Slow_clock.outFreq, value: 25 MHz}
+- {id: System_clock.outFreq, value: 100 MHz}
+- {id: gdet_clock.outFreq, value: 48 MHz}
+- {id: trng_clock.outFreq, value: 48 MHz}
+settings:
+- {id: PLL1_Mode, value: Normal}
+- {id: SCGMode, value: PLL1}
+- {id: SCG.PLL1M_MULT.scale, value: '100', locked: true}
+- {id: SCG.PLL1_NDIV.scale, value: '6', locked: true}
+- {id: SCG.PLL1_PDIV.scale, value: '4', locked: true}
+- {id: SCG.SCSSEL.sel, value: SCG.PLL1_CLK}
+- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled}
+- {id: SCG_SOSCCSR_SOSCEN_CFG, value: Enabled}
+- {id: SYSCON.FREQMEREFCLKSEL.sel, value: SYSCON.evtg_out0a}
+- {id: SYSCON.FREQMETARGETCLKSEL.sel, value: SYSCON.evtg_out0a}
+sources:
+- {id: SCG.SOSC.outFreq, value: 24 MHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+/* clang-format on */
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+/*******************************************************************************
+ * Code for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+void BOARD_BootClockPLL100M(void)
+{
+    /*!< Enable SCG clock */
+    CLOCK_EnableClock(kCLOCK_Scg);
+
+    CLOCK_SetupExtClocking(24000000U);
+    CLOCK_SetSysOscMonitorMode(kSCG_SysOscMonitorDisable);    /* System OSC Clock Monitor is disabled */
+
+    /*!< Set up PLL1 */
+    const pll_setup_t pll1Setup = {
+        .pllctrl = SCG_SPLLCTRL_SOURCE(0U) | SCG_SPLLCTRL_SELI(53U) | SCG_SPLLCTRL_SELP(26U),
+        .pllndiv = SCG_SPLLNDIV_NDIV(6U),
+        .pllpdiv = SCG_SPLLPDIV_PDIV(2U),
+        .pllmdiv = SCG_SPLLMDIV_MDIV(100U),
+        .pllRate = 100000000U
+    };
+    CLOCK_SetPLL1Freq(&pll1Setup);                       /*!< Configure PLL1 to the desired values */
+    CLOCK_SetPll1MonitorMode(kSCG_Pll1MonitorDisable);    /* Pll1 Monitor is disabled */
+
+    /*!< Set up clock selectors - Attach clocks to the peripheries */
+    CLOCK_AttachClk(kPLL1_to_MAIN_CLK);                 /*!< Switch MAIN_CLK to PLL1 */
+
+    /*!< Set up dividers */
+    CLOCK_SetClkDiv(kCLOCK_DivAhbClk, 1U);           /*!< Set AHBCLKDIV divider to value 1 */
+
+    /* Set SystemCoreClock variable */
+    SystemCoreClock = BOARD_BOOTCLOCKPLL100M_CORE_CLOCK;
+}
diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.h
new file mode 100644
index 000000000..c238a0423
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxn947/clock_config.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal frequency in Hz */
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32K frequency in Hz */
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockFRO12M **********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK           12000000U  /*!< Core clock frequency: 12000000Hz */
+#define BOARD_BOOTCLOCKFRO12M_ROSC_CLOCK                  0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFRO12M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFRO12M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF48M *********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFROHF48M_CORE_CLOCK         48000000U  /*!< Core clock frequency: 48000000Hz */
+#define BOARD_BOOTCLOCKFROHF48M_ROSC_CLOCK                0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFROHF48M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFROHF48M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************* Configuration BOARD_BootClockFROHF144M ********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKFROHF144M_CORE_CLOCK       144000000U  /*!< Core clock frequency: 144000000Hz */
+#define BOARD_BOOTCLOCKFROHF144M_ROSC_CLOCK               0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockFROHF144M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockFROHF144M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL150M *********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKPLL150M_CORE_CLOCK         150000000U  /*!< Core clock frequency: 150000000Hz */
+#define BOARD_BOOTCLOCKPLL150M_ROSC_CLOCK                 0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockPLL150M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockPLL150M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ******************** Configuration BOARD_BootClockPLL100M *********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKPLL100M_CORE_CLOCK         100000000U  /*!< Core clock frequency: 100000000Hz */
+#define BOARD_BOOTCLOCKPLL100M_ROSC_CLOCK                 0U  /*!< ROSC clock frequency: 0Hz */
+
+
+/*******************************************************************************
+ * API for BOARD_BootClockPLL100M configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockPLL100M(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.c
new file mode 100644
index 000000000..c33790ac5
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Pins v12.0
+processor: MCXN947
+package_id: MCXN947VDF
+mcu_data: ksdk2_0
+processor_version: 0.12.3
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+#include "fsl_common.h"
+#include "fsl_port.h"
+#include "pin_mux.h"
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitBootPins
+ * Description   : Calls initialization functions.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitBootPins(void)
+{
+    BOARD_InitPins();
+}
+
+/* clang-format off */
+/*
+ * TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+BOARD_InitPins:
+- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'}
+- pin_list:
+  - {pin_num: A1, peripheral: LPFlexcomm4, signal: LPFLEXCOMM_P0, pin_signal: PIO1_8/WUU0_IN10/LPTMR1_ALT3/TRACE_DATA0/FC4_P0/FC5_P4/CT_INP8/SCT0_OUT2/FLEXIO0_D16/PLU_OUT0/ENET0_TXD2/I3C1_SDA/TSI0_CH17/ADC1_A8,
+    slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, pull_value: low, input_buffer: enable,
+    invert_input: normal}
+  - {pin_num: B1, peripheral: LPFlexcomm4, signal: LPFLEXCOMM_P1, pin_signal: PIO1_9/TRACE_DATA1/FC4_P1/FC5_P5/CT_INP9/SCT0_OUT3/FLEXIO0_D17/PLU_OUT1/ENET0_TXD3/I3C1_SCL/TSI0_CH18/ADC1_A9,
+    slew_rate: fast, open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal}
+ -  {pin_num: B7, peripheral: GPIO0, signal: 'GPIO, 23', pin_signal: PIO0_23/WUU0_IN5/EWM0_OUT_b/FC1_P3/CT_INP3/FLEXIO0_D7/ADC0_A15/CMP2_IN2, direction: INPUT, slew_rate: fast,
+    open_drain: disable, drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS ***********
+ */
+/* clang-format on */
+
+/* FUNCTION ************************************************************************************************************
+ *
+ * Function Name : BOARD_InitPins
+ * Description   : Configures pin routing and optionally pin electrical features.
+ *
+ * END ****************************************************************************************************************/
+void BOARD_InitPins(void)
+{
+  /* Enables the clock for PORT0: Enables clock */
+    CLOCK_EnableClock(kCLOCK_Port0);
+
+    /* Enables the clock for PORT1: Enables clock */
+    CLOCK_EnableClock(kCLOCK_Port1);
+
+
+    const port_pin_config_t port1_8_pinA1_config = {/* Internal pull-up/down resistor is disabled */
+                                                    kPORT_PullDisable,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    kPORT_LowDriveStrength,
+                                                    /* Pin is configured as FC4_P0 */
+                                                    kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    kPORT_UnlockRegister};
+    /* PORT1_8 (pin A1) is configured as FC4_P0 */
+    PORT_SetPinConfig(PORT1, 8U, &port1_8_pinA1_config);
+
+    const port_pin_config_t port1_9_pinB1_config = {/* Internal pull-up/down resistor is disabled */
+                                                    kPORT_PullDisable,
+                                                    /* Low internal pull resistor value is selected. */
+                                                    kPORT_LowPullResistor,
+                                                    /* Fast slew rate is configured */
+                                                    kPORT_FastSlewRate,
+                                                    /* Passive input filter is disabled */
+                                                    kPORT_PassiveFilterDisable,
+                                                    /* Open drain output is disabled */
+                                                    kPORT_OpenDrainDisable,
+                                                    /* Low drive strength is configured */
+                                                    kPORT_LowDriveStrength,
+                                                    /* Pin is configured as FC4_P1 */
+                                                    kPORT_MuxAlt2,
+                                                    /* Digital input enabled */
+                                                    kPORT_InputBufferEnable,
+                                                    /* Digital input is not inverted */
+                                                    kPORT_InputNormal,
+                                                    /* Pin Control Register fields [15:0] are not locked */
+                                                    kPORT_UnlockRegister};
+    /* PORT1_9 (pin B1) is configured as FC4_P1 */
+    PORT_SetPinConfig(PORT1, 9U, &port1_9_pinB1_config);
+
+    const port_pin_config_t SW2 = {/* Internal pull-up/down resistor is disabled */
+                                   kPORT_PullDisable,
+                                   /* Low internal pull resistor value is selected. */
+                                   kPORT_LowPullResistor,
+                                   /* Fast slew rate is configured */
+                                   kPORT_FastSlewRate,
+                                   /* Passive input filter is disabled */
+                                   kPORT_PassiveFilterDisable,
+                                   /* Open drain output is disabled */
+                                   kPORT_OpenDrainDisable,
+                                   /* Low drive strength is configured */
+                                   kPORT_LowDriveStrength,
+                                   /* Pin is configured as PIO0_23 */
+                                   kPORT_MuxAlt0,
+                                   /* Digital input enabled */
+                                   kPORT_InputBufferEnable,
+                                   /* Digital input is not inverted */
+                                   kPORT_InputNormal,
+                                   /* Pin Control Register fields [15:0] are not locked */
+                                   kPORT_UnlockRegister};
+    /* PORT0_23 (pin B7) is configured as PIO0_23 */
+    PORT_SetPinConfig(PORT0, 23U, &SW2);
+}
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.h
new file mode 100644
index 000000000..40968c275
--- /dev/null
+++ b/hw/bsp/mcx/boards/frdm_mcxn947/pin_mux.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2022 NXP
+ * All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/***********************************************************************************************************************
+ * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file
+ * will be overwritten if the respective MCUXpresso Config Tools is used to update this file.
+ **********************************************************************************************************************/
+
+#ifndef _PIN_MUX_H_
+#define _PIN_MUX_H_
+
+/*!
+ * @addtogroup pin_mux
+ * @{
+ */
+
+/***********************************************************************************************************************
+ * API
+ **********************************************************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Calls initialization functions.
+ *
+ */
+void BOARD_InitBootPins(void);
+
+/*!
+ * @brief Configures pin routing and optionally pin electrical features.
+ *
+ */
+void BOARD_InitPins(void);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif /* _PIN_MUX_H_ */
+
+/***********************************************************************************************************************
+ * EOF
+ **********************************************************************************************************************/
diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.mk b/hw/bsp/mcx/boards/mcxn947brk/board.mk
index aaad5e73e..22fefd79b 100644
--- a/hw/bsp/mcx/boards/mcxn947brk/board.mk
+++ b/hw/bsp/mcx/boards/mcxn947brk/board.mk
@@ -2,7 +2,10 @@ MCU_VARIANT = MCXN947
 MCU_CORE = MCXN947_cm33_core0
 PORT ?= 1
 
-CFLAGS += -DCPU_MCXN947VDF_cm33_core0
+CPU_CORE = cortex-m33
+CFLAGS += \
+	-DCPU_MCXN947VDF_cm33_core0 \
+	-DCFG_TUSB_MCU=OPT_MCU_MCXN9 \
 
 JLINK_DEVICE = MCXN947_M33_0
 PYOCD_TARGET = MCXN947
diff --git a/hw/bsp/mcx/family.c b/hw/bsp/mcx/family.c
index 4344ffc4e..cc675a49d 100644
--- a/hw/bsp/mcx/family.c
+++ b/hw/bsp/mcx/family.c
@@ -24,7 +24,7 @@
  * This file is part of the TinyUSB stack.
  */
 
-#include "bsp/board.h"
+#include "bsp/board_api.h"
 #include "fsl_device_registers.h"
 #include "fsl_gpio.h"
 #include "fsl_lpuart.h"
@@ -33,6 +33,10 @@
 #include "pin_mux.h"
 #include "clock_config.h"
 
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM
+//--------------------------------------------------------------------+
+
 #ifdef BOARD_TUD_RHPORT
   #define PORT_SUPPORT_DEVICE(_n)  (BOARD_TUD_RHPORT == _n)
 #else
@@ -46,43 +50,49 @@
 #endif
 
 //--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM
-//--------------------------------------------------------------------+
-
-//--------------------------------------------------------------------+
 // Forward USB interrupt events to TinyUSB IRQ Handler
 //--------------------------------------------------------------------+
-void USB0_FS_IRQHandler(void)
-{
+
+#if CFG_TUSB_MCU == OPT_MCU_MCXN9
+void USB0_FS_IRQHandler(void) {
   tud_int_handler(0);
 }
 
-void USB1_HS_IRQHandler(void)
-{
+void USB1_HS_IRQHandler(void) {
   tud_int_handler(1);
 }
 
-void board_init(void)
-{
+#elif CFG_TUSB_MCU == OPT_MCU_MCXA15
+
+void USB0_IRQHandler(void) {
+  tud_int_handler(0);
+}
+
+#endif
+
+
+void board_init(void) {
   BOARD_InitPins();
   BOARD_InitBootClocks();
   CLOCK_SetupExtClocking(XTAL0_CLK_HZ);
 
+#if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
-
-#if CFG_TUSB_OS == OPT_OS_FREERTOS
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
   // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(USB1_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
+  #if CFG_TUSB_MCU == OPT_MCU_MCXN9
+  NVIC_SetPriority(USB0_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USB1_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  #else
+  NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  #endif
 #endif
 
   // LED
   CLOCK_EnableClock(LED_CLK);
-  gpio_pin_config_t led_config = {
-      kGPIO_DigitalOutput,
-      0,
-  };
-  GPIO_PinInit(LED_GPIO,LED_PIN, &led_config);
+  gpio_pin_config_t led_config = {kGPIO_DigitalOutput, 0};
+  GPIO_PinInit(LED_GPIO, LED_PIN, &led_config);
   board_led_write(0);
 
 #ifdef NEOPIXEL_PIN
@@ -100,7 +110,7 @@ void board_init(void)
   // Button
 #ifdef BUTTON_GPIO
   CLOCK_EnableClock(BUTTON_CLK);
-  gpio_pin_config_t const button_config = { kGPIO_DigitalInput, 0};
+  gpio_pin_config_t const button_config = {kGPIO_DigitalInput, 0};
   GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config);
 #endif
 
@@ -115,8 +125,8 @@ void board_init(void)
   lpuart_config_t uart_config;
   LPUART_GetDefaultConfig(&uart_config);
   uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
-  uart_config.enableTx     = true;
-  uart_config.enableRx     = true;
+  uart_config.enableTx = true;
+  uart_config.enableRx = true;
   LPUART_Init(UART_DEV, &uart_config, 12000000u);
 #endif
 
@@ -126,13 +136,18 @@ void board_init(void)
 #if PORT_SUPPORT_DEVICE(0)
   // Port0 is Full Speed
 
+  #if CFG_TUSB_MCU == OPT_MCU_MCXA15
+  RESET_PeripheralReset(kUSB0_RST_SHIFT_RSTn);
+  #elif CFG_TUSB_MCU == OPT_MCU_MCXN9
   CLOCK_AttachClk(kCLK_48M_to_USB0);
   CLOCK_EnableClock(kCLOCK_Usb0Ram);
   CLOCK_EnableClock(kCLOCK_Usb0Fs);
+  #endif
+
   CLOCK_EnableUsbfsClock();
 #endif
 
-#if PORT_SUPPORT_DEVICE(1)
+#if PORT_SUPPORT_DEVICE(1) && (CFG_TUSB_MCU == OPT_MCU_MCXN9)
   // Port1 is High Speed
 
   // Power
@@ -191,9 +206,8 @@ void board_init(void)
 // Board porting API
 //--------------------------------------------------------------------+
 
-void board_led_write(bool state)
-{
-  GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
+void board_led_write(bool state) {
+  GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
 
 #ifdef NEOPIXEL_PIN
   if (state) {
@@ -207,23 +221,21 @@ void board_led_write(bool state)
 #endif
 }
 
-uint32_t board_button_read(void)
-{
+uint32_t board_button_read(void) {
 #ifdef BUTTON_GPIO
   return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN);
 #endif
 }
 
-int board_uart_read(uint8_t* buf, int len)
-{
-  (void) buf; (void) len;
+int board_uart_read(uint8_t* buf, int len) {
+  (void) buf;
+  (void) len;
   return 0;
 }
 
-int board_uart_write(void const * buf, int len)
-{
+int board_uart_write(void const* buf, int len) {
 #ifdef UART_DEV
-  LPUART_WriteBlocking(UART_DEV, (uint8_t const *) buf, len);
+  LPUART_WriteBlocking(UART_DEV, (uint8_t const*) buf, len);
   return len;
 #else
   (void) buf; (void) len;
@@ -233,13 +245,13 @@ int board_uart_write(void const * buf, int len)
 
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
-{
+
+void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void)
-{
+uint32_t board_millis(void) {
   return system_ticks;
 }
+
 #endif
diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake
index b3a4a846e..223afb9ec 100644
--- a/hw/bsp/mcx/family.cmake
+++ b/hw/bsp/mcx/family.cmake
@@ -1,9 +1,5 @@
 include_guard()
 
-if (NOT BOARD)
-  message(FATAL_ERROR "BOARD not specified")
-endif ()
-
 set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk)
 set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
 
@@ -11,60 +7,80 @@ set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
 include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
 
 # toolchain set up
-set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
-set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
-
-set(FAMILY_MCUS MCXN9 CACHE INTERNAL "")
+if (MCU_VARIANT STREQUAL "MCXA153")
+  set(CMAKE_SYSTEM_PROCESSOR cortex-m33-nodsp-nofp CACHE INTERNAL "System Processor")
+  set(FAMILY_MCUS MCXA15 CACHE INTERNAL "")
+elseif (MCU_VARIANT STREQUAL "MCXN947")
+  set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+  set(FAMILY_MCUS MCXN9 CACHE INTERNAL "")
+else()
+  message(FATAL_ERROR "MCU_VARIANT not supported")
+endif()
 
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 #------------------------------------
 # BOARD_TARGET
 #------------------------------------
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
-  if (NOT TARGET ${BOARD_TARGET})
-    add_library(${BOARD_TARGET} STATIC
-      # external driver
-      #lib/sct_neopixel/sct_neopixel.c
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif()
+
+  if (NOT DEFINED LD_FILE_GNU)
+    set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld)
+  endif ()
+  set(LD_FILE_Clang ${LD_FILE_GNU})
+
+  if (NOT DEFINED STARTUP_FILE_GNU)
+    set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S)
+  endif()
+  set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU})
+
+  add_library(${BOARD_TARGET} STATIC
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    # driver
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c
+    # mcu
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMSIS_DIR}/CMSIS/Core/Include
+    ${SDK_DIR}/devices/${MCU_VARIANT}
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+    )
 
-      # driver
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c
+  if (${FAMILY_MCUS} STREQUAL "MCXN9")
+    target_sources(${BOARD_TARGET} PRIVATE
       ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c
-      # mcu
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c
-      )
-    #  target_compile_definitions(${BOARD_TARGET} PUBLIC
-    #    )
-    target_include_directories(${BOARD_TARGET} PUBLIC
-      # driver
-      # mcu
-      ${CMSIS_DIR}/CMSIS/Core/Include
-      ${SDK_DIR}/devices/${MCU_VARIANT}
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
-      )
+    )
+  elseif(${FAMILY_MCUS} STREQUAL "MCXA15")
+    target_sources(${BOARD_TARGET} PRIVATE
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_spc.c
+  )
+  endif()
 
-    update_board(${BOARD_TARGET})
+  update_board(${BOARD_TARGET})
 
-    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
-      target_sources(${BOARD_TARGET} PUBLIC
-        ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S
-        )
-      target_link_options(${BOARD_TARGET} PUBLIC
-        # linker file
-        "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld"
-        # nanolib
-        --specs=nosys.specs
-        --specs=nano.specs
-        )
-    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
-      target_link_options(${BOARD_TARGET} PUBLIC
-        "LINKER:--config=${LD_FILE_IAR}"
-        )
-    endif ()
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      --specs=nosys.specs --specs=nano.specs
+      #-nostartfiles
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_Clang}"
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
   endif ()
 endfunction()
 
@@ -93,7 +109,12 @@ function(family_configure_example TARGET RTOS)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_MCXN9 ${RTOS})
+  if (${FAMILY_MCUS} STREQUAL "MCXN9")
+    family_add_tinyusb(${TARGET} OPT_MCU_MCXN9 ${RTOS})
+  elseif(${FAMILY_MCUS} STREQUAL "MCXA15")
+    family_add_tinyusb(${TARGET} OPT_MCU_MCXA15 ${RTOS})
+  endif()
+
   target_sources(${TARGET}-tinyusb PUBLIC
     # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS
     ${TOP}/src/portable/chipidea/$<IF:${PORT},ci_hs/dcd_ci_hs.c,ci_fs/dcd_ci_fs.c>
diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk
index e384aa8eb..58149fb8d 100644
--- a/hw/bsp/mcx/family.mk
+++ b/hw/bsp/mcx/family.mk
@@ -4,19 +4,19 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk
 DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
 
 include $(TOP)/$(BOARD_PATH)/board.mk
-CPU_CORE ?= cortex-m33
 
 # Default to Highspeed PORT1
 PORT ?= 1
 
 CFLAGS += \
   -flto \
-  -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \
   -DBOARD_TUD_RHPORT=$(PORT) \
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration
 
+LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs
+
 # All source paths should be relative to the top level.
 LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld
 
@@ -36,9 +36,18 @@ SRC_C += \
 	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \
 	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \
 	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_gpio.c \
-	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_common_arm.c \
-	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpflexcomm.c \
 	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpuart.c \
+	$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_common_arm.c \
+
+# fsl_lpflexcomm for MCXN9
+ifeq ($(MCU_VARIANT), MCXN947)
+	SRC_C += $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_lpflexcomm.c
+endif
+
+# fsl_spc for MCXNA15
+ifeq ($(MCU_VARIANT), MCXA153)
+	SRC_C += $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_spc.c
+endif
 
 INC += \
 	$(TOP)/$(BOARD_PATH) \