Merge remote-tracking branch 'upstream/master' into pr/1702

73 files changed, 4459 insertions, 0 deletions

diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..57ed3a9e4
--- /dev/null
+++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,164 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wundef"
+
+// extra push due to https://github.com/renesas/fsp/pull/278
+#pragma GCC diagnostic push
+#endif
+
+#include "bsp_api.h"
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               4
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         1
+#define configSUPPORT_DYNAMIC_ALLOCATION        0
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+#define configCHECK_HANDLER_INSTALLATION       0
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/ra/board_cfg.h b/hw/bsp/ra/board_cfg.h
new file mode 100644
index 000000000..baed46b5f
--- /dev/null
+++ b/hw/bsp/ra/board_cfg.h
@@ -0,0 +1,45 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _BOARD_CFG_H
+#define _BOARD_CFG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8)
+  #define BOARD_HAS_USB_HIGHSPEED
+#endif
+
+// for SystemInit()
+void bsp_init(void * p_args);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/portenta_c33/board.cmake b/hw/bsp/ra/boards/portenta_c33/board.cmake
new file mode 100644
index 000000000..1837d8450
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/board.cmake
@@ -0,0 +1,25 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra6m5)
+
+set(JLINK_DEVICE R7FA6M5BH)
+set(DFU_UTIL_VID_PID 2341:0368)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
+
+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+set(PORT 1)
+endif()
+
+# Host port will be the other port
+set(HOST_PORT $<NOT:${PORT}>)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    BOARD_TUD_RHPORT=${PORT}
+    BOARD_TUH_RHPORT=${HOST_PORT}
+    # port 0 is fullspeed, port 1 is highspeed
+    BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    )
+endfunction()
diff --git a/hw/bsp/ra/boards/portenta_c33/board.h b/hw/bsp/ra/boards/portenta_c33/board.h
new file mode 100644
index 000000000..7841ec8b8
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/board.h
@@ -0,0 +1,68 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1                  BSP_IO_PORT_01_PIN_07 // Red LED
+#define LED_STATE_ON          1
+
+#define SW1                   BSP_IO_PORT_04_PIN_08 // D12
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW },
+    { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
+
+    // USB FS
+    { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH },
+    { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+
+    // USB HS
+    { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS },
+    { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+
+    // ETM Trace
+    #ifdef TRACE_ETM
+    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+     #endif
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/portenta_c33/board.mk b/hw/bsp/ra/boards/portenta_c33/board.mk
new file mode 100644
index 000000000..6a5c2ffce
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/board.mk
@@ -0,0 +1,12 @@
+CPU_CORE = cortex-m33
+MCU_VARIANT = ra6m5
+
+LD_FILE = ${BOARD_PATH}/${BOARD}.ld
+
+# Port 1 is highspeed
+PORT ?= 1
+
+JLINK_DEVICE = R7FA6M5BH
+DFU_UTIL_OPTION = -d 2341:0368 -a 0
+
+flash: flash-dfu-util
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..33d381850
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,63 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (2)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+  #define BSP_CFG_RTOS (1)
+#else
+  #define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+  #define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x1000)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..bd6a901c3
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (6)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..6845183db
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA6M5BH3CFC
+#define BSP_MCU_FEATURE_SET ('B')
+#define BSP_ROM_SIZE_BYTES (2097152)
+#define BSP_RAM_SIZE_BYTES (524288)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (176)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..d5428540f
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,387 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA6M5 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 1
+  #define BSP_HOCO_HZ                 (18000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ                 (20000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+
+#define BSP_CFG_FLL_ENABLE                 (0)
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
+
+#if defined(_RA_TZ_SECURE)
+            #define BSP_TZ_SECURE_BUILD           (1)
+            #define BSP_TZ_NONSECURE_BUILD        (0)
+            #elif defined(_RA_TZ_NONSECURE)
+            #define BSP_TZ_SECURE_BUILD           (0)
+            #define BSP_TZ_NONSECURE_BUILD        (1)
+            #else
+#define BSP_TZ_SECURE_BUILD           (0)
+#define BSP_TZ_NONSECURE_BUILD        (0)
+#endif
+
+/* TrustZone Settings */
+#define BSP_TZ_CFG_INIT_SECURE_ONLY       (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE))
+#define BSP_TZ_CFG_SKIP_INIT              (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY)
+#define BSP_TZ_CFG_EXCEPTION_RESPONSE     (0)
+
+/* CMSIS TrustZone Settings */
+#define SCB_CSR_AIRCR_INIT                (1)
+#define SCB_AIRCR_BFHFNMINS_VAL           (0)
+#define SCB_AIRCR_SYSRESETREQS_VAL        (1)
+#define SCB_AIRCR_PRIS_VAL                (0)
+#define TZ_FPU_NS_USAGE                   (1)
+#ifndef SCB_NSACR_CP10_11_VAL
+#define SCB_NSACR_CP10_11_VAL             (3U)
+#endif
+
+#ifndef FPU_FPCCR_TS_VAL
+#define FPU_FPCCR_TS_VAL                  (1U)
+#endif
+#define FPU_FPCCR_CLRONRETS_VAL           (1)
+
+#ifndef FPU_FPCCR_CLRONRET_VAL
+#define FPU_FPCCR_CLRONRET_VAL            (1)
+#endif
+
+/* The C-Cache line size that is configured during startup. */
+#ifndef BSP_CFG_C_CACHE_LINE_SIZE
+#define BSP_CFG_C_CACHE_LINE_SIZE   (1U)
+#endif
+
+/* Type 1 Peripheral Security Attribution */
+
+/* Peripheral Security Attribution Register (PSAR) Settings */
+#ifndef BSP_TZ_CFG_PSARB
+#define BSP_TZ_CFG_PSARB (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \
+            (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \
+            0x33f4f9) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARC
+#define BSP_TZ_CFG_PSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \
+            0x7fffcef4) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARD
+#define BSP_TZ_CFG_PSARD (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \
+            0xffae07f0) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARE
+#define BSP_TZ_CFG_PSARE (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \
+            0x3f3ff8) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_MSSAR
+#define BSP_TZ_CFG_MSSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \
+            0xfffffffc) /* Unused */
+#endif
+
+/* Type 2 Peripheral Security Attribution */
+
+/* Security attribution for Cache registers. */
+#ifndef BSP_TZ_CFG_CSAR
+#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for RSTSRn registers. */
+#ifndef BSP_TZ_CFG_RSTSAR
+#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for registers of LVD channels. */
+#ifndef BSP_TZ_CFG_LVDSAR
+#define BSP_TZ_CFG_LVDSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \
+            0xFFFFFFFCU)
+#endif
+
+/* Security attribution for LPM registers. */
+#ifndef BSP_TZ_CFG_LPMSAR
+#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU)
+#endif
+/* Deep Standby Interrupt Factor Security Attribution Register. */
+#ifndef BSP_TZ_CFG_DPFSAR
+#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution for CGC registers. */
+#ifndef BSP_TZ_CFG_CGFSAR
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect all CGC registers from Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU)
+#endif
+#endif
+
+/* Security attribution for Battery Backup registers. */
+#ifndef BSP_TZ_CFG_BBFSAR
+#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF)
+#endif
+
+/* Security attribution for registers for IRQ channels. */
+#ifndef BSP_TZ_CFG_ICUSARA
+#define BSP_TZ_CFG_ICUSARA (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \
+            0xFFFF0000U)
+#endif
+
+/* Security attribution for NMI registers. */
+#ifndef BSP_TZ_CFG_ICUSARB
+#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */
+#endif
+
+/* Security attribution for registers for DMAC channels */
+#ifndef BSP_TZ_CFG_ICUSARC
+#define BSP_TZ_CFG_ICUSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \
+            0xFFFFFF00U)
+#endif
+
+/* Security attribution registers for SELSR0. */
+#ifndef BSP_TZ_CFG_ICUSARD
+#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN0. */
+#ifndef BSP_TZ_CFG_ICUSARE
+#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN1. */
+#ifndef BSP_TZ_CFG_ICUSARF
+#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU)
+#endif
+
+/* Set DTCSTSAR if the Secure program uses the DTC. */
+#if RA_NOT_DEFINED == RA_NOT_DEFINED
+#define BSP_TZ_CFG_DTC_USED (0U)
+#else
+ #define BSP_TZ_CFG_DTC_USED (1U)
+#endif
+
+/* Security attribution of FLWT and FCKMHZ registers. */
+#ifndef BSP_TZ_CFG_FSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no
+ * reason for nonsecure applications to access FLWT and FCKMHZ. */
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect FLWT and FCKMHZ registers from nonsecure write access. */
+#define BSP_TZ_CFG_FSAR (0xFEFEU)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_FSAR (0xFFFFU)
+#endif
+#endif
+
+/* Security attribution for SRAM registers. */
+#ifndef BSP_TZ_CFG_SRAMSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access
+ * SRAM0WTEN and therefore there is no reason to access PRCR2. */
+#define BSP_TZ_CFG_SRAMSAR (\
+        1 | \
+        ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \
+        4 | \
+        0xFFFFFFF8U)
+#endif
+
+/* Security attribution for Standby RAM registers. */
+#ifndef BSP_TZ_CFG_STBRAMSAR
+#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U)
+#endif
+
+/* Security attribution for the DMAC Bus Master MPU settings. */
+#ifndef BSP_TZ_CFG_MMPUSARA
+/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */
+#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC)
+#endif
+
+/* Security Attribution Register A for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARA
+#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU)
+#endif
+/* Security Attribution Register B for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARB
+#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU)
+#endif
+
+/* Enable Uninitialized Non-Secure Application Fallback. */
+#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK
+#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U)
+#endif
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+
+/* Option Function Select Register 1 Security Attribution */
+#ifndef BSP_CFG_ROM_REG_OFS1_SEL
+#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE)
+            #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U))
+#else
+#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U)
+#endif
+#endif
+
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/* Dual Mode Select Register */
+#ifndef BSP_CFG_ROM_REG_DUALSEL
+#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U))
+#endif
+
+/* Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_BPS0
+#define BSP_CFG_ROM_REG_BPS0 (~( 0U))
+#endif
+/* Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_BPS1
+#define BSP_CFG_ROM_REG_BPS1 (~( 0U))
+#endif
+/* Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_BPS2
+#define BSP_CFG_ROM_REG_BPS2 (~( 0U))
+#endif
+/* Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_BPS3
+#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU)
+#endif
+/* Permanent Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_PBPS0
+#define BSP_CFG_ROM_REG_PBPS0 (~( 0U))
+#endif
+/* Permanent Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_PBPS1
+#define BSP_CFG_ROM_REG_PBPS1 (~( 0U))
+#endif
+/* Permanent Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_PBPS2
+#define BSP_CFG_ROM_REG_PBPS2 (~( 0U))
+#endif
+/* Permanent Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_PBPS3
+#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL0
+#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0)
+#endif
+/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL1
+#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1)
+#endif
+/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL2
+#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2)
+#endif
+/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL3
+#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3)
+#endif
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..0eb5e0516
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,37 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+
+#define BSP_CFG_CLOCKS_SECURE   (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ         (24000000)                         /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY  (2)                                /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV         (BSP_CLOCKS_PLL_DIV_3)             /* PLL Div /3 */
+#define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(25U,0U))       /* PLL Mul x25.0 */
+#define BSP_CFG_PLL2_SOURCE     (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV        (BSP_CLOCKS_PLL_DIV_2)             /* PLL2 Div /2 */
+#define BSP_CFG_PLL2_MUL        (BSP_CLOCKS_PLL_MUL(20U,0U))       /* PLL2 Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL)      /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* UCLK Src: PLL2 */
+#define BSP_CFG_U60CK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* U60CK Src: PLL2 */
+#define BSP_CFG_OCTA_SOURCE     (BSP_CLOCKS_CLOCK_DISABLED)        /* OCTASPICLK Disabled */
+#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED)        /* CANFDCLK Disabled */
+#define BSP_CFG_CECCLK_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CECCLK Disabled */
+#define BSP_CFG_ICLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT     (2)                                /* EBCLK Div /2 */
+#define BSP_CFG_FCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV      (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV         (BSP_CLOCKS_USB_CLOCK_DIV_5)       /* UCLK Div /5 */
+#define BSP_CFG_U60CK_DIV       (BSP_CLOCKS_USB60_CLOCK_DIV_4)     /* U60CK Div /4 */
+#define BSP_CFG_OCTA_DIV        (BSP_CLOCKS_OCTA_CLOCK_DIV_1)      /* OCTASPICLK Div /1 */
+#define BSP_CFG_CANFDCLK_DIV    (BSP_CLOCKS_CANFD_CLOCK_DIV_1)     /* CANFDCLK Div /1 */
+#define BSP_CFG_CECCLK_DIV      (BSP_CLOCKS_CEC_CLOCK_DIV_1)       /* CECCLK Div /1 */
+
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld
new file mode 100644
index 000000000..ba15588e6
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld
@@ -0,0 +1,25 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x80000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x200000;
+DATA_FLASH_START = 0x08000000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x0100A100;
+OPTION_SETTING_LENGTH = 0x100;
+OPTION_SETTING_S_START = 0x0100A200;
+OPTION_SETTING_S_LENGTH = 0x100;
+ID_CODE_START = 0x00000000;
+ID_CODE_LENGTH = 0x0;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x68000000;
+OSPI_DEVICE_0_LENGTH = 0x8000000;
+OSPI_DEVICE_1_START = 0x70000000;
+OSPI_DEVICE_1_LENGTH = 0x10000000;
+
+/* Board has bootloader */
+FLASH_IMAGE_START = 0x10000;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.cmake b/hw/bsp/ra/boards/ra2a1_ek/board.cmake
new file mode 100644
index 000000000..4d083ca98
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m23 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra2a1)
+
+set(JLINK_DEVICE R7FA2A1AB)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h
new file mode 100644
index 000000000..c132387bc
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_06
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_01_PIN_05
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.mk b/hw/bsp/ra/boards/ra2a1_ek/board.mk
new file mode 100644
index 000000000..7a176418e
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/board.mk
@@ -0,0 +1,7 @@
+CPU_CORE = cortex-m23
+MCU_VARIANT = ra2a1
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA2A1AB
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..30637c17b
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,62 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+#ifdef __cplusplus
+            extern "C" {
+            #endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+              #define BSP_CFG_RTOS (2)
+             #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+              #define BSP_CFG_RTOS (1)
+             #else
+#define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+             #define BSP_CFG_BOOT_IMAGE (1)
+            #endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x400)
+#define BSP_CFG_HEAP_BYTES (0x400)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#ifdef __cplusplus
+            }
+            #endif
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..eb82f4697
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (2)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..710e85b28
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA2A1AB3CFM
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (262144)
+#define BSP_RAM_SIZE_BYTES (32768)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (64)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..6caef62cc
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,84 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+            extern "C" {
+            #endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+#define BSP_MCU_GROUP_RA2A1 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ             (24000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+                #define BSP_HOCO_HZ             (32000000)
+            #elif BSP_CFG_HOCO_FREQUENCY == 4
+                #define BSP_HOCO_HZ             (48000000)
+            #elif BSP_CFG_HOCO_FREQUENCY == 5
+                #define BSP_HOCO_HZ             (64000000)
+            #else
+                #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+            #endif
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (48U)
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0))
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8))
+#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF)
+#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/*
+ ID Code
+ Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings.
+ WARNING: This will disable debug access to the part and cannot be reversed by a debug probe.
+ */
+#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED)
+            #define BSP_CFG_ID_CODE_LONG_1 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_2 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_3 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_4 (0x00000000)
+            #else
+/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */
+#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF)
+#endif
+
+#ifdef __cplusplus
+            }
+            #endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..cd9d135f7
--- /dev/null
+++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,17 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */
+#define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */
+#define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.cmake b/hw/bsp/ra/boards/ra4m1_ek/board.cmake
new file mode 100644
index 000000000..4188d3188
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra4m1)
+
+set(JLINK_DEVICE R7FA4M1AB)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h
new file mode 100644
index 000000000..c132387bc
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_06
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_01_PIN_05
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.mk b/hw/bsp/ra/boards/ra4m1_ek/board.mk
new file mode 100644
index 000000000..f257c0000
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/board.mk
@@ -0,0 +1,7 @@
+CPU_CORE = cortex-m4
+MCU_VARIANT = ra4m1
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA4M1AB
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..11d5795df
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,35 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#undef RA_NOT_DEFINED
+#define BSP_CFG_RTOS (0)
+#if defined(_RA_BOOT_IMAGE)
+#define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x800)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE	(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE		(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(1)
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..444d32e56
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (4)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..d810dabb2
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA4M1AB3CFP
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (262144)
+#define BSP_RAM_SIZE_BYTES (32768)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (100)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..72cdb89e6
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,78 @@
+/* generated configuration header file through renesas e2 studio */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA4M1 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+  #define BSP_HOCO_HZ             (24000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ             (32000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 4
+  #define BSP_HOCO_HZ             (48000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 5
+  #define BSP_HOCO_HZ             (64000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (48U)
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8))
+#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0))
+#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/*
+ ID Code
+ Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings.
+ WARNING: This will disable debug access to the part and cannot be reversed by a debug probe.
+ */
+#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED)
+            #define BSP_CFG_ID_CODE_LONG_1 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_2 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_3 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_4 (0x00000000)
+            #else
+/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */
+#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF)
+#endif
+
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..554126523
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,21 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */
+#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* UCLK Src: PLL */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.cmake b/hw/bsp/ra/boards/ra4m3_ek/board.cmake
new file mode 100644
index 000000000..dfd5fc95a
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra4m3)
+
+set(JLINK_DEVICE R7FA4M3AF)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.h b/hw/bsp/ra/boards/ra4m3_ek/board.h
new file mode 100644
index 000000000..9dd2545a0
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1 (BSP_IO_PORT_04_PIN_15)
+#define LED_STATE_ON          1
+
+#define SW1  (BSP_IO_PORT_00_PIN_05)
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+  {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+  {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS
+  {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+  {.pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+  {.pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.mk b/hw/bsp/ra/boards/ra4m3_ek/board.mk
new file mode 100644
index 000000000..5987269b5
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/board.mk
@@ -0,0 +1,7 @@
+CPU_CORE = cortex-m33
+MCU_VARIANT = ra4m3
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA4M3AF
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..862ec25b7
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,63 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+#define BSP_CFG_RTOS (1)
+#else
+#define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+#define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x800)
+#define BSP_CFG_HEAP_BYTES (0x800)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..444d32e56
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (4)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..1a0bc02e2
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA4M3AF3CFB
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (1048576)
+#define BSP_RAM_SIZE_BYTES (131072)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (144)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..26e184a94
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,386 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+#define BSP_MCU_GROUP_RA4M3 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 1
+                #define BSP_HOCO_HZ                 (18000000)
+            #elif BSP_CFG_HOCO_FREQUENCY == 2
+                #define BSP_HOCO_HZ                 (20000000)
+            #else
+                #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+            #endif
+
+#define BSP_CFG_FLL_ENABLE                 (0)
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
+
+#if defined(_RA_TZ_SECURE)
+            #define BSP_TZ_SECURE_BUILD           (1)
+            #define BSP_TZ_NONSECURE_BUILD        (0)
+            #elif defined(_RA_TZ_NONSECURE)
+            #define BSP_TZ_SECURE_BUILD           (0)
+            #define BSP_TZ_NONSECURE_BUILD        (1)
+            #else
+#define BSP_TZ_SECURE_BUILD           (0)
+#define BSP_TZ_NONSECURE_BUILD        (0)
+#endif
+
+/* TrustZone Settings */
+#define BSP_TZ_CFG_INIT_SECURE_ONLY       (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE))
+#define BSP_TZ_CFG_SKIP_INIT              (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY)
+#define BSP_TZ_CFG_EXCEPTION_RESPONSE     (0)
+
+/* CMSIS TrustZone Settings */
+#define SCB_CSR_AIRCR_INIT                (1)
+#define SCB_AIRCR_BFHFNMINS_VAL           (0)
+#define SCB_AIRCR_SYSRESETREQS_VAL        (1)
+#define SCB_AIRCR_PRIS_VAL                (0)
+#define TZ_FPU_NS_USAGE                   (1)
+#ifndef SCB_NSACR_CP10_11_VAL
+#define SCB_NSACR_CP10_11_VAL             (3U)
+#endif
+
+#ifndef FPU_FPCCR_TS_VAL
+#define FPU_FPCCR_TS_VAL                  (1U)
+#endif
+#define FPU_FPCCR_CLRONRETS_VAL           (1)
+
+#ifndef FPU_FPCCR_CLRONRET_VAL
+#define FPU_FPCCR_CLRONRET_VAL            (1)
+#endif
+
+/* The C-Cache line size that is configured during startup. */
+#ifndef BSP_CFG_C_CACHE_LINE_SIZE
+#define BSP_CFG_C_CACHE_LINE_SIZE   (1U)
+#endif
+
+/* Type 1 Peripheral Security Attribution */
+
+/* Peripheral Security Attribution Register (PSAR) Settings */
+#ifndef BSP_TZ_CFG_PSARB
+#define BSP_TZ_CFG_PSARB (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \
+            (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \
+            0x33f4f9) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARC
+#define BSP_TZ_CFG_PSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \
+            0x7fffcef4) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARD
+#define BSP_TZ_CFG_PSARD (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \
+            (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \
+            0xffae07f0) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARE
+#define BSP_TZ_CFG_PSARE (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \
+            (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \
+            (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \
+            (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \
+            (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | \
+            0x3f3ff8) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_MSSAR
+#define BSP_TZ_CFG_MSSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \
+            0xfffffffc) /* Unused */
+#endif
+
+/* Type 2 Peripheral Security Attribution */
+
+/* Security attribution for Cache registers. */
+#ifndef BSP_TZ_CFG_CSAR
+#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for RSTSRn registers. */
+#ifndef BSP_TZ_CFG_RSTSAR
+#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for registers of LVD channels. */
+#ifndef BSP_TZ_CFG_LVDSAR
+#define BSP_TZ_CFG_LVDSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \
+            0xFFFFFFFCU)
+#endif
+
+/* Security attribution for LPM registers. */
+#ifndef BSP_TZ_CFG_LPMSAR
+#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU)
+#endif
+/* Deep Standby Interrupt Factor Security Attribution Register. */
+#ifndef BSP_TZ_CFG_DPFSAR
+#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution for CGC registers. */
+#ifndef BSP_TZ_CFG_CGFSAR
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect all CGC registers from Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU)
+#endif
+#endif
+
+/* Security attribution for Battery Backup registers. */
+#ifndef BSP_TZ_CFG_BBFSAR
+#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF)
+#endif
+
+/* Security attribution for registers for IRQ channels. */
+#ifndef BSP_TZ_CFG_ICUSARA
+#define BSP_TZ_CFG_ICUSARA (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \
+            (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \
+            (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \
+            0xFFFF0000U)
+#endif
+
+/* Security attribution for NMI registers. */
+#ifndef BSP_TZ_CFG_ICUSARB
+#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */
+#endif
+
+/* Security attribution for registers for DMAC channels */
+#ifndef BSP_TZ_CFG_ICUSARC
+#define BSP_TZ_CFG_ICUSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \
+            0xFFFFFF00U)
+#endif
+
+/* Security attribution registers for SELSR0. */
+#ifndef BSP_TZ_CFG_ICUSARD
+#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN0. */
+#ifndef BSP_TZ_CFG_ICUSARE
+#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN1. */
+#ifndef BSP_TZ_CFG_ICUSARF
+#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU)
+#endif
+
+/* Set DTCSTSAR if the Secure program uses the DTC. */
+#if RA_NOT_DEFINED == RA_NOT_DEFINED
+#define BSP_TZ_CFG_DTC_USED (0U)
+#else
+ #define BSP_TZ_CFG_DTC_USED (1U)
+#endif
+
+/* Security attribution of FLWT and FCKMHZ registers. */
+#ifndef BSP_TZ_CFG_FSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no
+ * reason for nonsecure applications to access FLWT and FCKMHZ. */
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect FLWT and FCKMHZ registers from nonsecure write access. */
+#define BSP_TZ_CFG_FSAR (0xFEFEU)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_FSAR (0xFFFFU)
+#endif
+#endif
+
+/* Security attribution for SRAM registers. */
+#ifndef BSP_TZ_CFG_SRAMSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access
+ * SRAM0WTEN and therefore there is no reason to access PRCR2. */
+#define BSP_TZ_CFG_SRAMSAR (\
+        1 | \
+        ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \
+        4 | \
+        0xFFFFFFF8U)
+#endif
+
+/* Security attribution for Standby RAM registers. */
+#ifndef BSP_TZ_CFG_STBRAMSAR
+#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U)
+#endif
+
+/* Security attribution for the DMAC Bus Master MPU settings. */
+#ifndef BSP_TZ_CFG_MMPUSARA
+/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */
+#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC)
+#endif
+
+/* Security Attribution Register A for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARA
+#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU)
+#endif
+/* Security Attribution Register B for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARB
+#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU)
+#endif
+
+/* Enable Uninitialized Non-Secure Application Fallback. */
+#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK
+#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U)
+#endif
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+
+/* Option Function Select Register 1 Security Attribution */
+#ifndef BSP_CFG_ROM_REG_OFS1_SEL
+#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE)
+            #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U))
+#else
+#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U)
+#endif
+#endif
+
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/* Dual Mode Select Register */
+#ifndef BSP_CFG_ROM_REG_DUALSEL
+#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU)
+#endif
+
+/* Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_BPS0
+#define BSP_CFG_ROM_REG_BPS0 (~( 0U))
+#endif
+/* Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_BPS1
+#define BSP_CFG_ROM_REG_BPS1 (~( 0U))
+#endif
+/* Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_BPS2
+#define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU)
+#endif
+/* Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_BPS3
+#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU)
+#endif
+/* Permanent Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_PBPS0
+#define BSP_CFG_ROM_REG_PBPS0 (~( 0U))
+#endif
+/* Permanent Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_PBPS1
+#define BSP_CFG_ROM_REG_PBPS1 (~( 0U))
+#endif
+/* Permanent Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_PBPS2
+#define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU)
+#endif
+/* Permanent Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_PBPS3
+#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL0
+#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0)
+#endif
+/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL1
+#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1)
+#endif
+/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL2
+#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL3
+#define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU)
+#endif
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..80641945d
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,25 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL Mul x24.0 */
+#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */
+#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL2 Mul x24.0 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.cmake b/hw/bsp/ra/boards/ra6m1_ek/board.cmake
new file mode 100644
index 000000000..b2f41a354
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra6m1)
+
+set(JLINK_DEVICE R7FA6M1AD)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h
new file mode 100644
index 000000000..f73a08fc0
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.h
@@ -0,0 +1,51 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_12
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_04_PIN_15
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT },
+    { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
+    // USB FS
+    { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS },
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.mk b/hw/bsp/ra/boards/ra6m1_ek/board.mk
new file mode 100644
index 000000000..f06b693d8
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.mk
@@ -0,0 +1,7 @@
+CPU_CORE = cortex-m4
+MCU_VARIANT = ra6m1
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA6M1AD
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..772e5e5b1
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,68 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (2)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+  #define BSP_CFG_RTOS (1)
+#else
+  #define BSP_CFG_RTOS (0)
+#endif
+#endif
+
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+  #define BSP_CFG_BOOT_IMAGE (1)
+#endif
+
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x1000)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..bd6a901c3
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (6)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..40bb3a3bf
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA6M1AD3CFP
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (524288)
+#define BSP_RAM_SIZE_BYTES (262144)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (100)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..5fedd754f
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,84 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA6M1 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 1
+  #define BSP_HOCO_HZ                 (18000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ                 (20000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+
+#define BSP_CFG_FLL_ENABLE                 (0)
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF)
+#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/*
+ ID Code
+ Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings.
+ WARNING: This will disable debug access to the part and cannot be reversed by a debug probe.
+ */
+#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED)
+  #define BSP_CFG_ID_CODE_LONG_1 (0x00000000)
+  #define BSP_CFG_ID_CODE_LONG_2 (0x00000000)
+  #define BSP_CFG_ID_CODE_LONG_3 (0x00000000)
+  #define BSP_CFG_ID_CODE_LONG_4 (0x00000000)
+#else
+  /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */
+  #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF)
+  #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF)
+  #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF)
+  #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..945a6010b
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,23 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_1) /* PLL Div /1 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */
+#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake
new file mode 100644
index 000000000..c91d48a32
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake
@@ -0,0 +1,22 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra6m5)
+
+set(JLINK_DEVICE R7FA6M5BH)
+
+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+set(PORT 1)
+endif()
+
+# Host port will be the other port
+set(HOST_PORT $<NOT:${PORT}>)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    BOARD_TUD_RHPORT=${PORT}
+    BOARD_TUH_RHPORT=${HOST_PORT}
+    # port 0 is fullspeed, port 1 is highspeed
+    BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    )
+endfunction()
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h
new file mode 100644
index 000000000..779f71810
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.h
@@ -0,0 +1,68 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1                  BSP_IO_PORT_00_PIN_08
+#define LED_STATE_ON          1
+
+#define SW1                   BSP_IO_PORT_00_PIN_05
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW },
+    { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
+
+    // USB FS
+    { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH },
+    { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+
+    // USB HS
+    { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS },
+    { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+
+    // ETM Trace
+    #ifdef TRACE_ETM
+    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+     #endif
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.mk b/hw/bsp/ra/boards/ra6m5_ek/board.mk
new file mode 100644
index 000000000..a5c933764
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.mk
@@ -0,0 +1,10 @@
+CPU_CORE = cortex-m33
+MCU_VARIANT = ra6m5
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA6M5BH
+
+# Port 1 is highspeed
+PORT ?= 1
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..33d381850
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,63 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (2)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+  #define BSP_CFG_RTOS (1)
+#else
+  #define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+  #define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x1000)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..bd6a901c3
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (6)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..6845183db
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA6M5BH3CFC
+#define BSP_MCU_FEATURE_SET ('B')
+#define BSP_ROM_SIZE_BYTES (2097152)
+#define BSP_RAM_SIZE_BYTES (524288)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (176)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..d5428540f
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,387 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA6M5 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 1
+  #define BSP_HOCO_HZ                 (18000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ                 (20000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+
+#define BSP_CFG_FLL_ENABLE                 (0)
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
+
+#if defined(_RA_TZ_SECURE)
+            #define BSP_TZ_SECURE_BUILD           (1)
+            #define BSP_TZ_NONSECURE_BUILD        (0)
+            #elif defined(_RA_TZ_NONSECURE)
+            #define BSP_TZ_SECURE_BUILD           (0)
+            #define BSP_TZ_NONSECURE_BUILD        (1)
+            #else
+#define BSP_TZ_SECURE_BUILD           (0)
+#define BSP_TZ_NONSECURE_BUILD        (0)
+#endif
+
+/* TrustZone Settings */
+#define BSP_TZ_CFG_INIT_SECURE_ONLY       (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE))
+#define BSP_TZ_CFG_SKIP_INIT              (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY)
+#define BSP_TZ_CFG_EXCEPTION_RESPONSE     (0)
+
+/* CMSIS TrustZone Settings */
+#define SCB_CSR_AIRCR_INIT                (1)
+#define SCB_AIRCR_BFHFNMINS_VAL           (0)
+#define SCB_AIRCR_SYSRESETREQS_VAL        (1)
+#define SCB_AIRCR_PRIS_VAL                (0)
+#define TZ_FPU_NS_USAGE                   (1)
+#ifndef SCB_NSACR_CP10_11_VAL
+#define SCB_NSACR_CP10_11_VAL             (3U)
+#endif
+
+#ifndef FPU_FPCCR_TS_VAL
+#define FPU_FPCCR_TS_VAL                  (1U)
+#endif
+#define FPU_FPCCR_CLRONRETS_VAL           (1)
+
+#ifndef FPU_FPCCR_CLRONRET_VAL
+#define FPU_FPCCR_CLRONRET_VAL            (1)
+#endif
+
+/* The C-Cache line size that is configured during startup. */
+#ifndef BSP_CFG_C_CACHE_LINE_SIZE
+#define BSP_CFG_C_CACHE_LINE_SIZE   (1U)
+#endif
+
+/* Type 1 Peripheral Security Attribution */
+
+/* Peripheral Security Attribution Register (PSAR) Settings */
+#ifndef BSP_TZ_CFG_PSARB
+#define BSP_TZ_CFG_PSARB (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \
+            (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \
+            0x33f4f9) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARC
+#define BSP_TZ_CFG_PSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \
+            0x7fffcef4) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARD
+#define BSP_TZ_CFG_PSARD (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \
+            0xffae07f0) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARE
+#define BSP_TZ_CFG_PSARE (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \
+            0x3f3ff8) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_MSSAR
+#define BSP_TZ_CFG_MSSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \
+            0xfffffffc) /* Unused */
+#endif
+
+/* Type 2 Peripheral Security Attribution */
+
+/* Security attribution for Cache registers. */
+#ifndef BSP_TZ_CFG_CSAR
+#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for RSTSRn registers. */
+#ifndef BSP_TZ_CFG_RSTSAR
+#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for registers of LVD channels. */
+#ifndef BSP_TZ_CFG_LVDSAR
+#define BSP_TZ_CFG_LVDSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \
+            0xFFFFFFFCU)
+#endif
+
+/* Security attribution for LPM registers. */
+#ifndef BSP_TZ_CFG_LPMSAR
+#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU)
+#endif
+/* Deep Standby Interrupt Factor Security Attribution Register. */
+#ifndef BSP_TZ_CFG_DPFSAR
+#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution for CGC registers. */
+#ifndef BSP_TZ_CFG_CGFSAR
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect all CGC registers from Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU)
+#endif
+#endif
+
+/* Security attribution for Battery Backup registers. */
+#ifndef BSP_TZ_CFG_BBFSAR
+#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF)
+#endif
+
+/* Security attribution for registers for IRQ channels. */
+#ifndef BSP_TZ_CFG_ICUSARA
+#define BSP_TZ_CFG_ICUSARA (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \
+            0xFFFF0000U)
+#endif
+
+/* Security attribution for NMI registers. */
+#ifndef BSP_TZ_CFG_ICUSARB
+#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */
+#endif
+
+/* Security attribution for registers for DMAC channels */
+#ifndef BSP_TZ_CFG_ICUSARC
+#define BSP_TZ_CFG_ICUSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \
+            0xFFFFFF00U)
+#endif
+
+/* Security attribution registers for SELSR0. */
+#ifndef BSP_TZ_CFG_ICUSARD
+#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN0. */
+#ifndef BSP_TZ_CFG_ICUSARE
+#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN1. */
+#ifndef BSP_TZ_CFG_ICUSARF
+#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU)
+#endif
+
+/* Set DTCSTSAR if the Secure program uses the DTC. */
+#if RA_NOT_DEFINED == RA_NOT_DEFINED
+#define BSP_TZ_CFG_DTC_USED (0U)
+#else
+ #define BSP_TZ_CFG_DTC_USED (1U)
+#endif
+
+/* Security attribution of FLWT and FCKMHZ registers. */
+#ifndef BSP_TZ_CFG_FSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no
+ * reason for nonsecure applications to access FLWT and FCKMHZ. */
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect FLWT and FCKMHZ registers from nonsecure write access. */
+#define BSP_TZ_CFG_FSAR (0xFEFEU)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_FSAR (0xFFFFU)
+#endif
+#endif
+
+/* Security attribution for SRAM registers. */
+#ifndef BSP_TZ_CFG_SRAMSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access
+ * SRAM0WTEN and therefore there is no reason to access PRCR2. */
+#define BSP_TZ_CFG_SRAMSAR (\
+        1 | \
+        ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \
+        4 | \
+        0xFFFFFFF8U)
+#endif
+
+/* Security attribution for Standby RAM registers. */
+#ifndef BSP_TZ_CFG_STBRAMSAR
+#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U)
+#endif
+
+/* Security attribution for the DMAC Bus Master MPU settings. */
+#ifndef BSP_TZ_CFG_MMPUSARA
+/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */
+#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC)
+#endif
+
+/* Security Attribution Register A for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARA
+#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU)
+#endif
+/* Security Attribution Register B for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARB
+#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU)
+#endif
+
+/* Enable Uninitialized Non-Secure Application Fallback. */
+#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK
+#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U)
+#endif
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+
+/* Option Function Select Register 1 Security Attribution */
+#ifndef BSP_CFG_ROM_REG_OFS1_SEL
+#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE)
+            #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U))
+#else
+#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U)
+#endif
+#endif
+
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/* Dual Mode Select Register */
+#ifndef BSP_CFG_ROM_REG_DUALSEL
+#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U))
+#endif
+
+/* Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_BPS0
+#define BSP_CFG_ROM_REG_BPS0 (~( 0U))
+#endif
+/* Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_BPS1
+#define BSP_CFG_ROM_REG_BPS1 (~( 0U))
+#endif
+/* Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_BPS2
+#define BSP_CFG_ROM_REG_BPS2 (~( 0U))
+#endif
+/* Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_BPS3
+#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU)
+#endif
+/* Permanent Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_PBPS0
+#define BSP_CFG_ROM_REG_PBPS0 (~( 0U))
+#endif
+/* Permanent Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_PBPS1
+#define BSP_CFG_ROM_REG_PBPS1 (~( 0U))
+#endif
+/* Permanent Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_PBPS2
+#define BSP_CFG_ROM_REG_PBPS2 (~( 0U))
+#endif
+/* Permanent Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_PBPS3
+#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL0
+#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0)
+#endif
+/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL1
+#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1)
+#endif
+/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL2
+#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2)
+#endif
+/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL3
+#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3)
+#endif
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..0eb5e0516
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,37 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+
+#define BSP_CFG_CLOCKS_SECURE   (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ         (24000000)                         /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY  (2)                                /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV         (BSP_CLOCKS_PLL_DIV_3)             /* PLL Div /3 */
+#define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(25U,0U))       /* PLL Mul x25.0 */
+#define BSP_CFG_PLL2_SOURCE     (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV        (BSP_CLOCKS_PLL_DIV_2)             /* PLL2 Div /2 */
+#define BSP_CFG_PLL2_MUL        (BSP_CLOCKS_PLL_MUL(20U,0U))       /* PLL2 Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL)      /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* UCLK Src: PLL2 */
+#define BSP_CFG_U60CK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* U60CK Src: PLL2 */
+#define BSP_CFG_OCTA_SOURCE     (BSP_CLOCKS_CLOCK_DISABLED)        /* OCTASPICLK Disabled */
+#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED)        /* CANFDCLK Disabled */
+#define BSP_CFG_CECCLK_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CECCLK Disabled */
+#define BSP_CFG_ICLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT     (2)                                /* EBCLK Div /2 */
+#define BSP_CFG_FCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV      (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV         (BSP_CLOCKS_USB_CLOCK_DIV_5)       /* UCLK Div /5 */
+#define BSP_CFG_U60CK_DIV       (BSP_CLOCKS_USB60_CLOCK_DIV_4)     /* U60CK Div /4 */
+#define BSP_CFG_OCTA_DIV        (BSP_CLOCKS_OCTA_CLOCK_DIV_1)      /* OCTASPICLK Div /1 */
+#define BSP_CFG_CANFDCLK_DIV    (BSP_CLOCKS_CANFD_CLOCK_DIV_1)     /* CANFDCLK Div /1 */
+#define BSP_CFG_CECCLK_DIV      (BSP_CLOCKS_CEC_CLOCK_DIV_1)       /* CECCLK Div /1 */
+
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
new file mode 100644
index 000000000..7b8ee9c95
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
@@ -0,0 +1,106 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  Project.AddSvdFile ("Cortex-M33.svd");
+  Project.AddSvdFile ("./R7FA6M5BH.svd");
+
+  Project.SetDevice ("R7FA6M5BH");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("50 MHz");
+
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  //File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf");
+  //File.Open ("../../../../../../examples/dual/cmake-build-ra6m5/host_hid_to_device_cdc/host_hid_to_device_cdc.elf");
+  File.Open ("../../../../../../examples/cmake-build-ra6m5/host/cdc_msc_hid/cdc_msc_hid.elf");
+}
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+  // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
+	Project.SetJLinkScript("../../../debug.jlinkscript");
+}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr != 0xFFFFFFFF) {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+  } else {
+    Util.Log("Project file error: failed to get program base");
+  }
+
+  PC = Elf.GetEntryPointPC();
+
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else if (VectorTableAddr != 0xFFFFFFFF) {
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr != 0xFFFFFFFF) {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+  } else {
+    Util.Log("Project file error: failed to get program base");
+  }
+
+  PC = Elf.GetEntryPointPC();
+
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else if (VectorTableAddr != 0xFFFFFFFF) {
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake
new file mode 100644
index 000000000..34780d776
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/board.cmake
@@ -0,0 +1,11 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra4m1)
+
+set(JLINK_DEVICE R7FA4M1AB)
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h
new file mode 100644
index 000000000..72abda27f
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_11 // D13
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_01_PIN_10 // D12
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk
new file mode 100644
index 000000000..b7075eec0
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/board.mk
@@ -0,0 +1,9 @@
+CPU_CORE = cortex-m4
+MCU_VARIANT = ra4m1
+
+LD_FILE = ${BOARD_PATH}/${BOARD}.ld
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA4M1AB
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..c1d1022cc
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,35 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#undef RA_NOT_DEFINED
+#define BSP_CFG_RTOS (0)
+#if defined(_RA_BOOT_IMAGE)
+#define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x800)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0)
+
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE	(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE		(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..444d32e56
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (4)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..336918800
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA4M1AB3CNE
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (262144)
+#define BSP_RAM_SIZE_BYTES (32768)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_QFN
+#define BSP_PACKAGE_PINS (48)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..fc604eb3b
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,87 @@
+/* generated configuration header file through renesas e2 studio */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA4M1 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+  #define BSP_HOCO_HZ             (24000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ             (32000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 4
+  #define BSP_HOCO_HZ             (48000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 5
+  #define BSP_HOCO_HZ             (64000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (48U)
+#define BSP_MCU_VBATT_SUPPORT       (1)
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8))
+#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0))
+#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/*
+ ID Code
+ Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings.
+ WARNING: This will disable debug access to the part and cannot be reversed by a debug probe.
+ */
+#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED)
+            #define BSP_CFG_ID_CODE_LONG_1 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_2 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_3 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_4 (0x00000000)
+            #else
+/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */
+#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..63618ec4b
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,21 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */
+#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/uno_r4.ld b/hw/bsp/ra/boards/uno_r4/uno_r4.ld
new file mode 100644
index 000000000..45f11dfb1
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/uno_r4.ld
@@ -0,0 +1,25 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x8000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x40000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x01010018;
+ID_CODE_LENGTH = 0x20;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x0;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+/* Uno R4 has bootloader */
+FLASH_IMAGE_START = 0x4000;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/debug.jlinkscript b/hw/bsp/ra/debug.jlinkscript
new file mode 100644
index 000000000..b34cfaa7f
--- /dev/null
+++ b/hw/bsp/ra/debug.jlinkscript
@@ -0,0 +1,4 @@
+int SetupTarget(void) {
+  JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x80000");
+  return 0;
+}
diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c
new file mode 100644
index 000000000..16332be17
--- /dev/null
+++ b/hw/bsp/ra/family.c
@@ -0,0 +1,282 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Rafael Silva
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include <stdio.h>
+
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wundef"
+
+// extra push due to https://github.com/renesas/fsp/pull/278
+#pragma GCC diagnostic push
+#endif
+
+#include "bsp_api.h"
+#include "r_ioport.h"
+#include "r_ioport_api.h"
+#include "renesas.h"
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
+#include "bsp/board_api.h"
+#include "board.h"
+
+/* Key code for writing PRCR register. */
+#define BSP_PRV_PRCR_KEY         (0xA500U)
+
+static const ioport_cfg_t family_pin_cfg = {
+    .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t),
+    .p_pin_cfg_data = board_pin_cfg,
+};
+static ioport_instance_ctrl_t port_ctrl;
+
+//--------------------------------------------------------------------+
+// Vector Data
+//--------------------------------------------------------------------+
+
+BSP_DONT_REMOVE BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS)
+const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] = {
+    [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */
+    [1] = usbfs_resume_handler,    /* USBFS RESUME (USBFS resume interrupt) */
+    [2] = usbfs_d0fifo_handler,    /* USBFS FIFO 0 (DMA transfer request 0) */
+    [3] = usbfs_d1fifo_handler,    /* USBFS FIFO 1 (DMA transfer request 1) */
+
+#ifdef BOARD_HAS_USB_HIGHSPEED
+    [4] = usbhs_interrupt_handler, /* USBHS INT (USBHS interrupt) */
+    [5] = usbhs_d0fifo_handler,    /* USBHS FIFO 0 (DMA transfer request 0) */
+    [6] = usbhs_d1fifo_handler,    /* USBHS FIFO 1 (DMA transfer request 1) */
+#endif
+};
+
+const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = {
+    [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT),            /* USBFS INT (USBFS interrupt) */
+    [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME),         /* USBFS RESUME (USBFS resume interrupt) */
+
+#ifndef BSP_MCU_GROUP_RA2A1
+    [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0),         /* USBFS FIFO 0 (DMA transfer request 0) */
+    [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1),         /* USBFS FIFO 1 (DMA transfer request 1) */
+#endif
+
+#ifdef BOARD_HAS_USB_HIGHSPEED
+    [4] = BSP_PRV_IELS_ENUM(EVENT_USBHS_USB_INT_RESUME), /* USBHS USB INT RESUME (USBHS interrupt) */
+    [5] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_0),         /* USBHS FIFO 0 (DMA transfer request 0) */
+    [6] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_1),         /* USBHS FIFO 1 (DMA transfer request 1) */
+#endif
+};
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_init(void) {
+  // Enable global interrupts in CPSR register since board with bootloader such as Arduino Uno R4
+  // can transfer CPU control with CPSR.I bit set to 0 (disable IRQ)
+  __enable_irq();
+
+  /* Configure pins. */
+  R_IOPORT_Open(&port_ctrl, &family_pin_cfg);
+
+#ifdef TRACE_ETM
+  // TRCKCR is protected by PRCR bit0 register
+  R_SYSTEM->PRCR = (uint16_t) (BSP_PRV_PRCR_KEY | 0x01);
+
+  // Enable trace clock (max 100Mhz). Since PLL/CPU is 200Mhz, clock div = 2
+  R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk | 0x01;
+
+  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_KEY;
+#endif
+
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(USBFS_INT_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+  SysTick_Config(SystemCoreClock / 1000);
+#endif
+
+  board_led_write(false);
+}
+
+void board_init_after_tusb(void) {
+  // For board that use USB LDO regulator
+#if defined(BOARD_UNO_R4)
+  R_USB_FS0->USBMC |= R_USB_FS0_USBMC_VDCEN_Msk;
+#endif
+}
+
+void board_led_write(bool state) {
+  R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON);
+}
+
+uint32_t board_button_read(void) {
+  bsp_io_level_t lvl = !BUTTON_STATE_ACTIVE;
+  R_IOPORT_PinRead(&port_ctrl, SW1, &lvl);
+  return lvl == BUTTON_STATE_ACTIVE;
+}
+
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+int board_uart_write(void const *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+
+#endif
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+
+#if CFG_TUD_ENABLED && defined(BOARD_TUD_RHPORT)
+  #define PORT_SUPPORT_DEVICE(_n)  (BOARD_TUD_RHPORT == _n)
+#else
+  #define PORT_SUPPORT_DEVICE(_n)  0
+#endif
+
+#if CFG_TUH_ENABLED && defined(BOARD_TUH_RHPORT)
+  #define PORT_SUPPORT_HOST(_n)    (BOARD_TUH_RHPORT == _n)
+#else
+  #define PORT_SUPPORT_HOST(_n)    0
+#endif
+
+//------------- USB0 FullSpeed -------------//
+void usbfs_interrupt_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+
+  #if PORT_SUPPORT_HOST(0)
+  tuh_int_handler(0, true);
+  #endif
+
+  #if PORT_SUPPORT_DEVICE(0)
+  tud_int_handler(0);
+  #endif
+}
+
+void usbfs_resume_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+
+  #if PORT_SUPPORT_HOST(0)
+  tuh_int_handler(0, true);
+  #endif
+
+  #if PORT_SUPPORT_DEVICE(0)
+  tud_int_handler(0);
+  #endif
+}
+
+void usbfs_d0fifo_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
+
+void usbfs_d1fifo_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
+
+//------------- USB1 HighSpeed -------------//
+#ifdef BOARD_HAS_USB_HIGHSPEED
+
+void usbhs_interrupt_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+
+  #if PORT_SUPPORT_HOST(1)
+  tuh_int_handler(1, true);
+  #endif
+
+  #if PORT_SUPPORT_DEVICE(1)
+  tud_int_handler(1);
+  #endif
+}
+
+void usbhs_d0fifo_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
+
+void usbhs_d1fifo_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
+
+#endif
+
+//--------------------------------------------------------------------+
+// stdlib
+//--------------------------------------------------------------------+
+
+int close(int fd) {
+  (void) fd;
+  return -1;
+}
+
+int fstat(int fd, void *pstat) {
+  (void) fd;
+  (void) pstat;
+  return 0;
+}
+
+off_t lseek(int fd, off_t pos, int whence) {
+  (void) fd;
+  (void) pos;
+  (void) whence;
+  return 0;
+}
+
+int isatty(int fd) {
+  (void) fd;
+  return 1;
+}
diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake
new file mode 100644
index 000000000..426e1ca8f
--- /dev/null
+++ b/hw/bsp/ra/family.cmake
@@ -0,0 +1,133 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
+set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+#set(FREERTOS_PORT A_CUSTOM_PORT CACHE INTERNAL "")
+
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    add_library(${BOARD_TARGET} STATIC
+      ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/startup.c
+      ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/system.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_clocks.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_common.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_delay.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_group_irq.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_guard.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_io.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_irq.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_register_protection.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_security.c
+      ${FSP_RA}/src/r_ioport/r_ioport.c
+      )
+
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      -ffreestanding
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg/bsp
+      ${CMSIS_DIR}/CMSIS/Core/Include
+      ${FSP_RA}/inc
+      ${FSP_RA}/inc/api
+      ${FSP_RA}/inc/instances
+      ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Include
+      ${FSP_RA}/src/bsp/mcu/all
+      ${FSP_RA}/src/bsp/mcu/${MCU_VARIANT}
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
+      set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld)
+    endif ()
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        # linker file
+        "LINKER:--script=${LD_FILE_GNU}"
+        -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc
+        -nostartfiles
+        # nanolib
+        --specs=nano.specs
+        --specs=nosys.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    )
+
+#  # RA has custom freertos port
+#  if (NOT TARGET freertos_kernel_port)
+#    add_library(freertos_kernel_port STATIC)
+#    target_sources(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port/port.c)
+#    target_include_directories(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port)
+#
+#    target_link_libraries(freertos_kernel_port PUBLIC freertos_kernel)
+#  endif ()
+
+    # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_RAXXX ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c
+    ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c
+    ${TOP}/src/portable/renesas/rusb2/rusb2_common.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_jlink(${TARGET})
+
+  if (DEFINED DFU_UTIL_VID_PID)
+    family_add_bin_hex(${TARGET})
+    family_flash_dfu_util(${TARGET} ${DFU_UTIL_VID_PID})
+  endif ()
+endfunction()
diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk
new file mode 100644
index 000000000..4447e8499
--- /dev/null
+++ b/hw/bsp/ra/family.mk
@@ -0,0 +1,75 @@
+DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5
+
+FSP_RA = hw/mcu/renesas/fsp/ra/fsp
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+# Don't include options setting in .bin file since it create unnecessary large file due to padding
+OBJCOPY_BIN_OPTION = --only-section .text --only-section .data --only-section .rodata --only-section .bss
+
+# Default to port 0 fullspeed, board with port 1 highspeed should override this in board.mk
+PORT ?= 0
+
+CFLAGS += \
+  -flto \
+  -DCFG_TUSB_MCU=OPT_MCU_RAXXX \
+  -DBOARD_TUD_RHPORT=$(PORT) \
+	-Wno-error=undef \
+	-Wno-error=strict-prototypes \
+	-Wno-error=cast-align \
+	-Wno-error=cast-qual \
+	-Wno-error=unused-but-set-variable \
+	-Wno-error=unused-variable \
+	-nostdlib \
+	-nostartfiles \
+	-ffreestanding
+
+ifeq ($(PORT), 1)
+  CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+  $(info "Using PORT 1 HighSpeed")
+else
+  CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+  $(info "Using PORT 0 FullSpeed")
+endif
+
+LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs
+
+SRC_C += \
+	src/portable/renesas/rusb2/dcd_rusb2.c \
+	src/portable/renesas/rusb2/hcd_rusb2.c \
+	src/portable/renesas/rusb2/rusb2_common.c \
+	$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \
+	$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_common.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_delay.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_group_irq.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_guard.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_io.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_irq.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_register_protection.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_rom_registers.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_sbrk.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_security.c \
+	$(FSP_RA)/src/r_ioport/r_ioport.c \
+
+INC += \
+	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/$(BOARD_PATH)/fsp_cfg \
+	$(TOP)/$(BOARD_PATH)/fsp_cfg/bsp \
+	$(TOP)/$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Include \
+	$(TOP)/$(FSP_RA)/inc \
+	$(TOP)/$(FSP_RA)/inc/api \
+	$(TOP)/$(FSP_RA)/inc/instances \
+  $(TOP)/$(FSP_RA)/src/bsp/mcu/all \
+	$(TOP)/$(FSP_RA)/src/bsp/mcu/$(MCU_VARIANT) \
+
+ifndef LD_FILE
+LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld
+endif
+
+LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc
+
+# For freeRTOS port source
+# hack to use the port provided by renesas
+FREERTOS_PORTABLE_SRC = $(FSP_RA)/src/rm_freertos_port
diff --git a/hw/bsp/ra/linker/gcc/fsp.ld b/hw/bsp/ra/linker/gcc/fsp.ld
new file mode 100644
index 000000000..453d46f24
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/fsp.ld
@@ -0,0 +1,716 @@
+/* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/
+/*
+ XIP_SECONDARY_SLOT_IMAGE = 1;
+*/
+
+QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH);
+OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH);
+OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH);
+
+/* If a flat (secure) project has DEFINED RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */
+__RESERVE_NS_RAM = !DEFINED(PROJECT_NONSECURE) && DEFINED(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0);
+
+ITCM_START = DEFINED(ITCM_START)? ITCM_START : 0;
+ITCM_LENGTH = DEFINED(ITCM_LENGTH)? ITCM_LENGTH : 0;
+DTCM_START = DEFINED(DTCM_START)? DTCM_START : 0;
+DTCM_LENGTH = DEFINED(DTCM_LENGTH)? DTCM_LENGTH : 0;
+NS_OFFSET_START = DEFINED(NS_OFFSET_START) ? NS_OFFSET_START : 0;
+NS_IMAGE_OFFSET = DEFINED(PROJECT_NONSECURE) ? NS_OFFSET_START : 0;
+RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0;
+RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0;
+RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH;
+RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH;
+
+OPTION_SETTING_START_NS = DEFINED(PROJECT_NONSECURE) ? OPTION_SETTING_START : OPTION_SETTING_START + 0x80;
+
+/* This definition is used to avoid moving the counter in OPTION_SETTING regions for projects that should not configure option settings.
+ * Bootloader images do not configure option settings because they are owned by the bootloader.
+ * FSP_BOOTABLE_IMAGE is only defined in bootloader images. */
+__bl_FSP_BOOTABLE_IMAGE = 1;
+__bln_FSP_BOOTABLE_IMAGE = 1;
+PROJECT_SECURE_OR_FLAT = (!DEFINED(PROJECT_NONSECURE) || DEFINED(PROJECT_SECURE)) && OPTION_SETTING_LENGTH && !DEFINED(FSP_BOOTABLE_IMAGE);
+USE_OPTION_SETTING_NS = DEFINED(PROJECT_NONSECURE) && !DEFINED(FSP_BOOTABLE_IMAGE);
+
+__bl_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                         FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH :
+                         FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
+__bl_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                          FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH;
+__bl_FLASH_IMAGE_END    = __bl_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
+__bl_XIP_SECONDARY_FLASH_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                         FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH;
+__bl_XIP_SECONDARY_FLASH_IMAGE_END = __bl_XIP_SECONDARY_FLASH_IMAGE_START + __bl_FLASH_IMAGE_LENGTH;
+__bl_FLASH_NS_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                        FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                        __bl_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH;
+__bl_FLASH_NSC_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                        FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                        __bl_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH;
+__bl_RAM_NS_START    = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                       FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
+                       RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH;
+__bl_RAM_NSC_START   = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                       FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH :
+                       __bl_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH;
+__bl_FLASH_NS_IMAGE_START = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                            FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                            __bl_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2;
+__bln_FLASH_IMAGE_START = __bl_FLASH_NS_IMAGE_START;
+__bln_FLASH_IMAGE_LENGTH = !DEFINED(FLASH_BOOTLOADER_LENGTH) ? 0 :
+                           FLASH_APPLICATION_NS_LENGTH == 0 ? __bl_FLASH_IMAGE_END :
+                           FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2;
+
+XIP_SECONDARY_SLOT_IMAGE = DEFINED(XIP_SECONDARY_SLOT_IMAGE) ? XIP_SECONDARY_SLOT_IMAGE : 0;
+FLASH_ORIGIN = !DEFINED(FLASH_IMAGE_START) ? FLASH_START :
+                XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START :
+                FLASH_IMAGE_START;
+LIMITED_FLASH_LENGTH = DEFINED(FLASH_IMAGE_LENGTH) ? FLASH_IMAGE_LENGTH :
+                       DEFINED(FLASH_BOOTLOADER_LENGTH) ? FLASH_BOOTLOADER_LENGTH :
+                       FLASH_LENGTH;
+
+/* Define memory regions. */
+MEMORY
+{
+  ITCM (rx)               : ORIGIN = ITCM_START + NS_IMAGE_OFFSET, LENGTH = ITCM_LENGTH
+  DTCM (rwx)              : ORIGIN = DTCM_START + NS_IMAGE_OFFSET, LENGTH = DTCM_LENGTH
+  FLASH (rx)              : ORIGIN = FLASH_ORIGIN + NS_IMAGE_OFFSET, LENGTH = LIMITED_FLASH_LENGTH
+  RAM (rwx)               : ORIGIN = RAM_START + NS_IMAGE_OFFSET, LENGTH = RAM_LENGTH
+  DATA_FLASH (rx)         : ORIGIN = DATA_FLASH_START + NS_IMAGE_OFFSET, LENGTH = DATA_FLASH_LENGTH
+  QSPI_FLASH (rx)         : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH
+  OSPI_DEVICE_0 (rx)      : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
+  OSPI_DEVICE_1 (rx)      : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
+  OSPI_DEVICE_0_RAM (rwx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
+  OSPI_DEVICE_1_RAM (rwx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
+  SDRAM (rwx)             : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH
+  OPTION_SETTING (r)      : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_LENGTH
+  OPTION_SETTING_OFS (r)  : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET, LENGTH = 0x18
+  OPTION_SETTING_SAS (r)  : ORIGIN = OPTION_SETTING_START + NS_IMAGE_OFFSET + 0x34, LENGTH = OPTION_SETTING_LENGTH - 0x34
+  OPTION_SETTING_S (r)    : ORIGIN = OPTION_SETTING_S_START + NS_IMAGE_OFFSET, LENGTH = OPTION_SETTING_S_LENGTH
+  ID_CODE (rx)            : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH
+}
+
+/* Library configurations */
+GROUP(libgcc.a libc.a libm.a libnosys.a)
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be DEFINED in code:
+ *   Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __copy_table_start__
+ *   __copy_table_end__
+ *   __zero_table_start__
+ *   __zero_table_end__
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   __Vectors_End
+ *   __Vectors_Size
+ *   __qspi_flash_start__
+ *   __qspi_flash_end__
+ *   __qspi_flash_code_size__
+ *   __qspi_region_max_size__
+ *   __qspi_region_start_address__
+ *   __qspi_region_end_address__
+ *   __ospi_device_0_start__
+ *   __ospi_device_0_end__
+ *   __ospi_device_0_code_size__
+ *   __ospi_device_0_region_max_size__
+ *   __ospi_device_0_region_start_address__
+ *   __ospi_device_0_region_end_address__
+ *   __ospi_device_1_start__
+ *   __ospi_device_1_end__
+ *   __ospi_device_1_code_size__
+ *   __ospi_device_1_region_max_size__
+ *   __ospi_device_1_region_start_address__
+ *   __ospi_device_1_region_end_address__
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    /* Initialized ITCM data. */
+    .itcm_data :
+    {
+        /* Start of ITCM Secure Trustzone region. */
+        __tz_ITCM_S = ABSOLUTE(ITCM_START);
+
+        /* All ITCM data start */
+        __itcm_data_start__ = .;
+
+        KEEP(*(.itcm_data*))
+
+        /* All ITCM data end */
+        __itcm_data_end__ = .;
+
+        /*
+         * Start of the ITCM Non-Secure Trustzone region.
+         * ITCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects.
+         */
+        __tz_ITCM_N = DEFINED(ITCM_NS_START) ? ABSOLUTE(ITCM_NS_START) : ALIGN(__itcm_data_end__, 8192);
+    } > ITCM
+
+    .text :
+    {
+        __tz_FLASH_S = ABSOLUTE(FLASH_START);
+        __ROM_Start = .;
+
+        /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much
+         * space because ROM registers are at address 0x400 and there is very little space
+         * in between. */
+        KEEP(*(.fixed_vectors*))
+        KEEP(*(.application_vectors*))
+        __Vectors_End = .;
+
+        /* ROM Registers start at address 0x00000400 for devices that do not have the OPTION_SETTING region. */
+        . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x400;
+        KEEP(*(.rom_registers*))
+
+        /* Reserving 0x100 bytes of space for ROM registers. */
+        . = OPTION_SETTING_LENGTH > 0 ? . : __ROM_Start + 0x500;
+
+        /* Allocate flash write-boundary-aligned
+         * space for sce9 wrapped public keys for mcuboot if the module is used.
+         */
+		. = ALIGN(128);
+        KEEP(*(.mcuboot_sce9_key*))
+
+        *(.text*)
+
+        KEEP(*(.version))
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+        __usb_dev_descriptor_start_fs = .;
+        KEEP(*(.usb_device_desc_fs*))
+        __usb_cfg_descriptor_start_fs = .;
+        KEEP(*(.usb_config_desc_fs*))
+        __usb_interface_descriptor_start_fs = .;
+        KEEP(*(.usb_interface_desc_fs*))
+        __usb_descriptor_end_fs = .;
+        __usb_dev_descriptor_start_hs = .;
+        KEEP(*(.usb_device_desc_hs*))
+        __usb_cfg_descriptor_start_hs = .;
+        KEEP(*(.usb_config_desc_hs*))
+        __usb_interface_descriptor_start_hs = .;
+        KEEP(*(.usb_interface_desc_hs*))
+        __usb_descriptor_end_hs = .;
+
+        KEEP(*(.eh_frame*))
+
+        __ROM_End = .;
+    } > FLASH = 0xFF
+
+    __Vectors_Size = __Vectors_End - __Vectors;
+
+    .ARM.extab :
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    /* To copy multiple ROM to RAM sections,
+     * uncomment .copy.table section and,
+     * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
+    /*
+    .copy.table :
+    {
+        . = ALIGN(4);
+        __copy_table_start__ = .;
+        LONG (__etext)
+        LONG (__data_start__)
+        LONG (__data_end__ - __data_start__)
+        LONG (__etext2)
+        LONG (__data2_start__)
+        LONG (__data2_end__ - __data2_start__)
+        __copy_table_end__ = .;
+    } > FLASH
+    */
+
+    /* To clear multiple BSS sections,
+     * uncomment .zero.table section and,
+     * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
+    /*
+    .zero.table :
+    {
+        . = ALIGN(4);
+        __zero_table_start__ = .;
+        LONG (__bss_start__)
+        LONG (__bss_end__ - __bss_start__)
+        LONG (__bss2_start__)
+        LONG (__bss2_end__ - __bss2_start__)
+        __zero_table_end__ = .;
+    } > FLASH
+    */
+
+    __etext = .;
+
+    __tz_RAM_S = ORIGIN(RAM);
+
+    /* If DTC is used, put the DTC vector table at the start of SRAM.
+       This avoids memory holes due to 1K alignment required by it. */
+    .fsp_dtc_vector_table (NOLOAD) :
+    {
+        . = ORIGIN(RAM);
+        *(.fsp_dtc_vector_table)
+    } > RAM
+
+    /* Initialized data section. */
+    .data :
+    {
+        __data_start__ = .;
+        . = ALIGN(4);
+
+        __Code_In_RAM_Start = .;
+
+        KEEP(*(.code_in_ram*))
+        __Code_In_RAM_End = .;
+
+        *(vtable)
+        /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */
+        *(.data.*)
+        *(.data)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+
+        KEEP(*(.jcr*))
+
+        . = ALIGN(4);
+
+        /* All data end */
+        __data_end__ = .;
+
+    } > RAM AT > FLASH
+
+    /* Start address of the initial values for .dtcm_data. */
+    __dtcm_data_init_start = __etext + __data_end__ - __data_start__;
+
+    /* Initialized DTCM data. */
+    .dtcm_data :
+    {
+        /* Start of DTCM Secure Trustzone region. */
+        __tz_DTCM_S = ABSOLUTE(DTCM_START);
+
+        /* Initialized DTCM data start */
+        __dtcm_data_start__ = .;
+
+        KEEP(*(.dtcm_data*))
+
+        /* Initialized DTCM data end */
+        __dtcm_data_end__ = .;
+    } > DTCM AT > FLASH
+
+    /* Uninitialized DTCM data. */
+    .dtcm_noinit (NOLOAD):
+    {
+        /* Uninitialized DTCM data start */
+        __dtcm_noinit_start = .;
+
+        KEEP(*(.dtcm_noinit*))
+
+        /* Uninitialized DTCM data end */
+        __dtcm_noinit_end = .;
+
+        /*
+         * Start of the DTCM Non-Secure Trustzone region.
+         * DTCM_NS_START can be used to set a fixed address for non-secure ITCM in secure projects or flat projects.
+         */
+        __tz_DTCM_N = DEFINED(DTCM_NS_START) ? ABSOLUTE(DTCM_NS_START) : ALIGN(__dtcm_noinit_end, 8192);
+    } > DTCM
+
+    /* TrustZone Secure Gateway Stubs Section. */
+
+    /* Some arithmetic is needed to eliminate unnecessary FILL for secure projects. */
+    /* 1. Get the address to the next block after the .data section in FLASH. */
+    DATA_END = LOADADDR(.data) + SIZEOF(.data);
+    /* 2. Determine the secure gateway stubs address either by the provided linker variable or the next 1024-byte block after .data */
+    SGSTUBS_LOC = (DEFINED(PROJECT_SECURE) && DEFINED(FLASH_NSC_START)) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(DATA_END, 1024);
+    /* 3. Manually specify the start location for .gnu.sgstubs */
+    .gnu.sgstubs SGSTUBS_LOC : ALIGN(1024)
+    {
+        __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024);
+        _start_sg = .;
+        *(.gnu.sgstubs*)
+        . = ALIGN(32);
+        _end_sg = .;
+    } > FLASH
+
+    __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : FLASH_LENGTH < 32768 ? FLASH_LENGTH : ALIGN(32768);
+    FLASH_NS_IMAGE_START = DEFINED(FLASH_NS_IMAGE_START) ? FLASH_NS_IMAGE_START : __tz_FLASH_N;
+
+    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH);
+
+    /* QSPI_FLASH section to be downloaded via debugger */
+    .qspi_flash :
+    {
+        __qspi_flash_start__ = .;
+        KEEP(*(.qspi_flash*))
+        KEEP(*(.code_in_qspi*))
+        __qspi_flash_end__ = .;
+    } > QSPI_FLASH
+    __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__;
+
+    /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */
+    __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__);
+    .qspi_non_retentive : AT (__qspi_flash_code_addr__)
+    {
+        __qspi_non_retentive_start__ = .;
+        KEEP(*(.qspi_non_retentive*))
+        __qspi_non_retentive_end__ = .;
+    } > QSPI_FLASH
+    __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__;
+
+    __qspi_region_max_size__ = 0x4000000;   /* Must be the same as defined in MEMORY above */
+    __qspi_region_start_address__ = __qspi_flash_start__;
+    __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__;
+
+    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_QSPI_FLASH_N = __qspi_non_retentive_end__;
+
+    /* Support for OctaRAM */
+    .OSPI_DEVICE_0_NO_LOAD (NOLOAD):
+    {
+        . = ALIGN(4);
+        __ospi_device_0_start__ = .;
+        *(.ospi_device_0_no_load*)
+        . = ALIGN(4);
+        __ospi_device_0_end__ = .;
+    } > OSPI_DEVICE_0_RAM
+
+    .OSPI_DEVICE_1_NO_LOAD (NOLOAD):
+    {
+        . = ALIGN(4);
+        __ospi_device_1_start__ = .;
+        *(.ospi_device_1_no_load*)
+        . = ALIGN(4);
+        __ospi_device_1_end__ = .;
+    } > OSPI_DEVICE_1_RAM
+
+    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0);
+
+    /* OSPI_DEVICE_0 section to be downloaded via debugger */
+    .OSPI_DEVICE_0 :
+    {
+        __ospi_device_0_start__ = .;
+        KEEP(*(.ospi_device_0*))
+        KEEP(*(.code_in_ospi_device_0*))
+        __ospi_device_0_end__ = .;
+    } > OSPI_DEVICE_0
+    __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__;
+
+    /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
+    __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__);
+    .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__)
+    {
+        __ospi_device_0_non_retentive_start__ = .;
+        KEEP(*(.ospi_device_0_non_retentive*))
+        __ospi_device_0_non_retentive_end__ = .;
+    } > OSPI_DEVICE_0
+    __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__;
+
+    __ospi_device_0_region_max_size__ = 0x8000000;   /* Must be the same as defined in MEMORY above */
+    __ospi_device_0_region_start_address__ = __ospi_device_0_start__;
+    __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__;
+
+    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__;
+
+    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1);
+
+    /* OSPI_DEVICE_1 section to be downloaded via debugger */
+    .OSPI_DEVICE_1 :
+    {
+        __ospi_device_1_start__ = .;
+        KEEP(*(.ospi_device_1*))
+        KEEP(*(.code_in_ospi_device_1*))
+        __ospi_device_1_end__ = .;
+    } > OSPI_DEVICE_1
+    __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__;
+
+    /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
+    __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__);
+    .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__)
+    {
+        __ospi_device_1_non_retentive_start__ = .;
+        KEEP(*(.ospi_device_1_non_retentive*))
+        __ospi_device_1_non_retentive_end__ = .;
+    } > OSPI_DEVICE_1
+    __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__;
+
+    __ospi_device_1_region_max_size__ = 0x10000000;   /* Must be the same as defined in MEMORY above */
+    __ospi_device_1_region_start_address__ = __ospi_device_1_start__;
+    __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__;
+
+    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
+    __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__;
+
+    .noinit (NOLOAD):
+    {
+        . = ALIGN(4);
+        __noinit_start = .;
+        KEEP(*(.noinit*))
+        . = ALIGN(8);
+        /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */
+        KEEP(*(.heap.*))
+        __noinit_end = .;
+    } > RAM
+
+    .bss :
+    {
+        . = ALIGN(4);
+        __bss_start__ = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        __bss_end__ = .;
+    } > RAM
+
+    .heap (NOLOAD):
+    {
+        . = ALIGN(8);
+        __HeapBase = .;
+        PROVIDE(end = .);
+        /* Place the STD heap here. */
+        KEEP(*(.heap))
+        __HeapLimit = .;
+    } > RAM
+
+    /* Stacks are stored in this section. */
+    .stack_dummy (NOLOAD):
+    {
+        . = ALIGN(8);
+        __StackLimit = .;
+        /* Main stack */
+        KEEP(*(.stack))
+        __StackTop = .;
+        /* Thread stacks */
+        KEEP(*(.stack*))
+        __StackTopAll = .;
+    } > RAM
+
+    PROVIDE(__stack = __StackTopAll);
+
+    /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used
+       at run time for things such as ThreadX memory pool allocations. */
+    __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4);
+
+    /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects.
+     * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary.
+     * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
+    __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024);
+
+    /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects.
+     * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not
+     * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary.
+     * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
+    __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START - RAM_NS_BUFFER_BLOCK_LENGTH) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192);
+
+    /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects.
+     * The EDMAC is a non-secure bus master and can only access non-secure RAM. */
+    .ns_buffer (NOLOAD):
+    {
+        /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */
+        . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .;
+
+        KEEP(*(.ns_buffer*))
+    } > RAM
+
+    /* Data flash. */
+    .data_flash :
+    {
+        . = ORIGIN(DATA_FLASH);
+        __tz_DATA_FLASH_S = .;
+        __Data_Flash_Start = .;
+        KEEP(*(.data_flash*))
+        __Data_Flash_End = .;
+
+        __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024);
+    } > DATA_FLASH
+
+    /* Note: There are no secure/non-secure boundaries for SDRAM.  These symbols are provided for the RA configuration tool. */
+    __tz_SDRAM_S = ORIGIN(SDRAM);
+
+    /* SDRAM */
+    .sdram (NOLOAD):
+    {
+        __SDRAM_Start = .;
+        KEEP(*(.sdram*))
+        KEEP(*(.frame*))
+        __SDRAM_End = .;
+    } > SDRAM
+
+    /* Note: There are no secure/non-secure boundaries for SDRAM.  These symbols are provided for the RA configuration tool. */
+    __tz_SDRAM_N = __SDRAM_End;
+
+    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool. */
+    __tz_ID_CODE_S = ORIGIN(ID_CODE);
+
+    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool.
+     *       Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE
+     *       memory region between TrustZone projects. */
+    __tz_ID_CODE_N = __tz_ID_CODE_S;
+
+    .id_code :
+    {
+        __ID_Code_Start = .;
+        KEEP(*(.id_code*))
+        __ID_Code_End = .;
+    } > ID_CODE
+
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS);
+
+    .option_setting_ofs :
+    {
+        __OPTION_SETTING_OFS_Start = .;
+        KEEP(*(.option_setting_ofs0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x04 : __OPTION_SETTING_OFS_Start;
+        KEEP(*(.option_setting_ofs2))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_OFS_Start + 0x10 : __OPTION_SETTING_OFS_Start;
+        KEEP(*(.option_setting_dualsel))
+        __OPTION_SETTING_OFS_End = .;
+    } > OPTION_SETTING_OFS = 0xFF
+
+    .option_setting_sas :
+    {
+        __OPTION_SETTING_SAS_Start = .;
+        KEEP(*(.option_setting_sas))
+        __OPTION_SETTING_SAS_End = .;
+    } > OPTION_SETTING_SAS = 0xFF
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_N = ABSOLUTE(OPTION_SETTING_START_NS);
+
+    .option_setting_ns :
+    {
+        __OPTION_SETTING_NS_Start = .;
+        KEEP(*(.option_setting_ofs1))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x04 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_ofs3))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_banksel))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_bps0))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_bps1))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_bps2))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x4C : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_bps3))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_pbps0))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_pbps1))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_pbps2))
+        . = USE_OPTION_SETTING_NS ? __OPTION_SETTING_NS_Start + 0x6C : __OPTION_SETTING_NS_Start;
+        KEEP(*(.option_setting_pbps3))
+        __OPTION_SETTING_NS_End = .;
+    } > OPTION_SETTING = 0xFF
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S);
+
+    .option_setting_s :
+    {
+        __OPTION_SETTING_S_Start = .;
+        KEEP(*(.option_setting_ofs1_sec))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x04 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_ofs3_sec))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_banksel_sec))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sec0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sec1))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sec2))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x4C : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sec3))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_pbps_sec0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_pbps_sec1))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_pbps_sec2))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x6C : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_pbps_sec3))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_ofs1_sel))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x84 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_ofs3_sel))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_banksel_sel))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sel0))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sel1))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sel2))
+        . = PROJECT_SECURE_OR_FLAT ? __OPTION_SETTING_S_Start + 0xCC : __OPTION_SETTING_S_Start;
+        KEEP(*(.option_setting_bps_sel3))
+        __OPTION_SETTING_S_End = .;
+    } > OPTION_SETTING_S = 0xFF
+
+    /* Symbol required for RA Configuration tool. */
+    __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End;
+}
diff --git a/hw/bsp/ra/linker/gcc/ra2a1.ld b/hw/bsp/ra/linker/gcc/ra2a1.ld
new file mode 100644
index 000000000..218acbb2a
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra2a1.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x8000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x40000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x01010018;
+ID_CODE_LENGTH = 0x20;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x0;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/linker/gcc/ra4m1.ld b/hw/bsp/ra/linker/gcc/ra4m1.ld
new file mode 100644
index 000000000..218acbb2a
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra4m1.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x8000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x40000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x01010018;
+ID_CODE_LENGTH = 0x20;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x0;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/linker/gcc/ra4m3.ld b/hw/bsp/ra/linker/gcc/ra4m3.ld
new file mode 100644
index 000000000..7b3a63fbe
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra4m3.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x20000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x100000;
+DATA_FLASH_START = 0x08000000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x0100A100;
+OPTION_SETTING_LENGTH = 0x100;
+OPTION_SETTING_S_START = 0x0100A200;
+OPTION_SETTING_S_LENGTH = 0x100;
+ID_CODE_START = 0x00000000;
+ID_CODE_LENGTH = 0x0;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/linker/gcc/ra6m1.ld b/hw/bsp/ra/linker/gcc/ra6m1.ld
new file mode 100644
index 000000000..91d27f74c
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra6m1.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x1FFE0000;
+RAM_LENGTH = 0x40000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x80000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x0100A150;
+ID_CODE_LENGTH = 0x10;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/linker/gcc/ra6m5.ld b/hw/bsp/ra/linker/gcc/ra6m5.ld
new file mode 100644
index 000000000..af747fd9b
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra6m5.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x80000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x200000;
+DATA_FLASH_START = 0x08000000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x0100A100;
+OPTION_SETTING_LENGTH = 0x100;
+OPTION_SETTING_S_START = 0x0100A200;
+OPTION_SETTING_S_LENGTH = 0x100;
+ID_CODE_START = 0x00000000;
+ID_CODE_LENGTH = 0x0;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x68000000;
+OSPI_DEVICE_0_LENGTH = 0x8000000;
+OSPI_DEVICE_1_START = 0x70000000;
+OSPI_DEVICE_1_LENGTH = 0x10000000;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/r_ioport_cfg.h b/hw/bsp/ra/r_ioport_cfg.h
new file mode 100644
index 000000000..cb7c07932
--- /dev/null
+++ b/hw/bsp/ra/r_ioport_cfg.h
@@ -0,0 +1,7 @@
+/* generated configuration header file - do not edit */
+#ifndef R_IOPORT_CFG_H_
+#define R_IOPORT_CFG_H_
+
+#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE)
+
+#endif /* R_IOPORT_CFG_H_ */
diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h
new file mode 100644
index 000000000..ca667faa3
--- /dev/null
+++ b/hw/bsp/ra/vector_data.h
@@ -0,0 +1,36 @@
+/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */
+#ifndef VECTOR_DATA_H
+#define VECTOR_DATA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ISR prototypes */
+void usbfs_interrupt_handler(void);
+void usbfs_resume_handler(void);
+void usbfs_d0fifo_handler(void);
+void usbfs_d1fifo_handler(void);
+
+#ifdef BOARD_HAS_USB_HIGHSPEED
+void usbhs_interrupt_handler(void);
+void usbhs_d0fifo_handler(void);
+void usbhs_d1fifo_handler(void);
+#endif
+
+/* Vector table allocations */
+#define USBFS_INT_IRQn    0
+#define USBFS_RESUME_IRQn 1
+#define USBFS_FIFO_0_IRQn 2
+#define USBFS_FIFO_1_IRQn 3
+
+#define USBHS_USB_INT_RESUME_IRQn  4 /* USBHS USB INT RESUME (USBHS interrupt) */
+#define USBHS_FIFO_0_IRQn          5 /* USBHS FIFO 0 (DMA transfer request 0) */
+#define USBHS_FIFO_1_IRQn          6 /* USBHS FIFO 1 (DMA transfer request 1) */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif