move nxp dcd ehci controller reset and modde into dcd

rt1064 work with cdc msc example

3 files changed, 76 insertions, 76 deletions

diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c
index f21d3259d..f5d2a199e 100644
--- a/hw/bsp/ea4357/ea4357.c
+++ b/hw/bsp/ea4357/ea4357.c
@@ -166,19 +166,19 @@ void board_init(void)
 #if CFG_TUSB_RHPORT0_MODE
   Chip_USB0_Init();
 
-  // Reset controller
-  LPC_USB0->USBCMD_D |= 0x02;
-  while( LPC_USB0->USBCMD_D & 0x02 ) {}
-
-  // Set mode
-  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
-    LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-
-    LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging
-  #else // TODO OTG
-    LPC_USB0->USBMODE_D = USBMODE_DEVICE;
-    LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
-  #endif
+//  // Reset controller
+//  LPC_USB0->USBCMD_D |= 0x02;
+//  while( LPC_USB0->USBCMD_D & 0x02 ) {}
+//
+//  // Set mode
+//  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
+//    LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
+//
+//    LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging
+//  #else // TODO OTG
+//    LPC_USB0->USBMODE_D = USBMODE_DEVICE;
+//    LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
+//  #endif
 #endif
 
   /* USB1
@@ -202,19 +202,19 @@ void board_init(void)
 #if CFG_TUSB_RHPORT1_MODE
   Chip_USB1_Init();
 
-  // Reset controller
-  LPC_USB1->USBCMD_D |= 0x02;
-  while( LPC_USB1->USBCMD_D & 0x02 ) {}
-
-  // Set mode
-  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
-    LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-  #else // TODO OTG
-    LPC_USB1->USBMODE_D = USBMODE_DEVICE;
-  #endif
-
-  // USB1 as fullspeed
-  LPC_USB1->PORTSC1_D |= (1<<24);
+//  // Reset controller
+//  LPC_USB1->USBCMD_D |= 0x02;
+//  while( LPC_USB1->USBCMD_D & 0x02 ) {}
+//
+//  // Set mode
+//  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
+//    LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
+//  #else // TODO OTG
+//    LPC_USB1->USBMODE_D = USBMODE_DEVICE;
+//  #endif
+//
+//  // USB1 as fullspeed
+//  LPC_USB1->PORTSC1_D |= (1<<24);
 #endif
 
   // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board)
diff --git a/hw/bsp/mcb1800/mcb1800.c b/hw/bsp/mcb1800/mcb1800.c
index 4fe874762..6d5284869 100644
--- a/hw/bsp/mcb1800/mcb1800.c
+++ b/hw/bsp/mcb1800/mcb1800.c
@@ -139,36 +139,36 @@ void board_init(void)
 #if CFG_TUSB_RHPORT0_MODE
   Chip_USB0_Init();
 
-  // Reset controller
-  LPC_USB0->USBCMD_D |= 0x02;
-  while( LPC_USB0->USBCMD_D & 0x02 ) {}
-
-  // Set mode
-  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
-    LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-  #else // TODO OTG
-    LPC_USB0->USBMODE_D = USBMODE_DEVICE;
-    LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
-  #endif
+//  // Reset controller
+//  LPC_USB0->USBCMD_D |= 0x02;
+//  while( LPC_USB0->USBCMD_D & 0x02 ) {}
+//
+//  // Set mode
+//  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
+//    LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
+//  #else // TODO OTG
+//    LPC_USB0->USBMODE_D = USBMODE_DEVICE;
+//    LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
+//  #endif
 #endif
 
   // USB1
 #if CFG_TUSB_RHPORT1_MODE
   Chip_USB1_Init();
 
-  // Reset controller
-  LPC_USB1->USBCMD_D |= 0x02;
-  while( LPC_USB1->USBCMD_D & 0x02 ) {}
-
-  // Set mode
-  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
-    LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-  #else // TODO OTG
-    LPC_USB1->USBMODE_D = USBMODE_DEVICE;
-  #endif
-
-  // USB1 as fullspeed
-  LPC_USB1->PORTSC1_D |= (1<<24);
+//  // Reset controller
+//  LPC_USB1->USBCMD_D |= 0x02;
+//  while( LPC_USB1->USBCMD_D & 0x02 ) {}
+//
+//  // Set mode
+//  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
+//    LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
+//  #else // TODO OTG
+//    LPC_USB1->USBMODE_D = USBMODE_DEVICE;
+//  #endif
+//
+//  // USB1 as fullspeed
+//  LPC_USB1->PORTSC1_D |= (1<<24);
 #endif
 }
 
diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c
index fd6f0119b..e1bafff8d 100644
--- a/hw/bsp/ngx4330/ngx4330.c
+++ b/hw/bsp/ngx4330/ngx4330.c
@@ -164,19 +164,19 @@ void board_init(void)
 #if CFG_TUSB_RHPORT0_MODE
   Chip_USB0_Init();
 
-  // Reset controller
-  LPC_USB0->USBCMD_D |= 0x02;
-  while( LPC_USB0->USBCMD_D & 0x02 ) {}
-
-  // Set mode
-  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
-    LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-
-    LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging
-  #else // TODO OTG
-    LPC_USB0->USBMODE_D = USBMODE_DEVICE;
-    LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
-  #endif
+//  // Reset controller
+//  LPC_USB0->USBCMD_D |= 0x02;
+//  while( LPC_USB0->USBCMD_D & 0x02 ) {}
+//
+//  // Set mode
+//  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
+//    LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
+//
+//    LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging
+//  #else // TODO OTG
+//    LPC_USB0->USBMODE_D = USBMODE_DEVICE;
+//    LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;
+//  #endif
 #endif
 
   /* USB1
@@ -200,19 +200,19 @@ void board_init(void)
 #if CFG_TUSB_RHPORT1_MODE
   Chip_USB1_Init();
 
-  // Reset controller
-  LPC_USB1->USBCMD_D |= 0x02;
-  while( LPC_USB1->USBCMD_D & 0x02 ) {}
-
-  // Set mode
-  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
-    LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-  #else // TODO OTG
-    LPC_USB1->USBMODE_D = USBMODE_DEVICE;
-  #endif
-
-  // USB1 as fullspeed
-  LPC_USB1->PORTSC1_D |= (1<<24);
+//  // Reset controller
+//  LPC_USB1->USBCMD_D |= 0x02;
+//  while( LPC_USB1->USBCMD_D & 0x02 ) {}
+//
+//  // Set mode
+//  #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
+//    LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
+//  #else // TODO OTG
+//    LPC_USB1->USBMODE_D = USBMODE_DEVICE;
+//  #endif
+//
+//  // USB1 as fullspeed
+//  LPC_USB1->PORTSC1_D |= (1<<24);
 
 //	Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6);							/* GPIO5[6] = USB1_PWR_EN */
 //	Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true);							/* GPIO5[6] output high */