add make.mk and rules.mk to help new makefile example

5 files changed, 64 insertions, 35 deletions

diff --git a/hw/bsp/metro_m0_express/board.mk b/hw/bsp/metro_m0_express/board.mk
index 98c4401d2..76614d2ad 100644
--- a/hw/bsp/metro_m0_express/board.mk
+++ b/hw/bsp/metro_m0_express/board.mk
@@ -23,20 +23,26 @@ SRC_C += \
 	hw/mcu/microchip/samd/asf4/samd21/hal/src/hal_atomic.c
 
 INC += \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/ \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/config \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/include \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/include \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/utils/include \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hpl/pm/ \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hpl/port \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hri \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd21/CMSIS/Include
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/ \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/config \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/include \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/include \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/utils/include \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hpl/pm/ \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hpl/port \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/hri \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd21/CMSIS/Include
 
+# For TinyUSB port source 
 VENDOR = microchip
 CHIP_FAMILY = samd21
 
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM0
+
+# For flash-jlink target
 JLINK_DEVICE = ATSAMD21G18
+JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink
diff --git a/hw/bsp/metro_m4_express/board.mk b/hw/bsp/metro_m4_express/board.mk
index a0c94c448..2063d9ea0 100644
--- a/hw/bsp/metro_m4_express/board.mk
+++ b/hw/bsp/metro_m4_express/board.mk
@@ -25,19 +25,25 @@ SRC_C += \
 	hw/mcu/microchip/samd/asf4/samd51/hal/src/hal_atomic.c
 
 INC += \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/ \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/config \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/include \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hal/include \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hal/utils/include \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hpl/port \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hri \
-	-I$(TOP)/hw/mcu/microchip/samd/asf4/samd51/CMSIS/Include
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/ \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/config \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/include \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hal/include \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hal/utils/include \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hpl/port \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/hri \
+	$(TOP)/hw/mcu/microchip/samd/asf4/samd51/CMSIS/Include
 
+# For TinyUSB port source
 VENDOR = microchip
 CHIP_FAMILY = samd51
 
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM4F
+
+# For flash-jlink target
 JLINK_DEVICE = ATSAMD51J19
+JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink
diff --git a/hw/bsp/pca10056/board.mk b/hw/bsp/pca10056/board.mk
index 9dc02ed11..317a4969f 100644
--- a/hw/bsp/pca10056/board.mk
+++ b/hw/bsp/pca10056/board.mk
@@ -1,11 +1,12 @@
 CFLAGS += \
-	-DCFG_TUSB_MCU=OPT_MCU_NRF5X \
-	-DNRF52840_XXAA \
 	-mthumb \
 	-mabi=aapcs \
 	-mcpu=cortex-m4 \
 	-mfloat-abi=hard \
-	-mfpu=fpv4-sp-d16
+	-mfpu=fpv4-sp-d16 \
+	-DCFG_TUSB_MCU=OPT_MCU_NRF5X \
+	-DNRF52840_XXAA \
+  -DCONFIG_GPIO_AS_PINRESET
 
 # nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49
 CFLAGS += -Wno-error=undef 
@@ -23,27 +24,31 @@ SRC_C += \
 SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c
 
 INC += \
-	-I$(TOP)/hw/cmsis/Include \
-	-I$(TOP)/hw/mcu/nordic \
-	-I$(TOP)/hw/mcu/nordic/nrfx \
-	-I$(TOP)/hw/mcu/nordic/nrfx/mdk \
-	-I$(TOP)/hw/mcu/nordic/nrfx/hal \
-	-I$(TOP)/hw/mcu/nordic/nrfx/drivers/include \
-	-I$(TOP)/hw/mcu/nordic/nrfx/drivers/src \
+	$(TOP)/hw/cmsis/Include \
+	$(TOP)/hw/mcu/nordic \
+	$(TOP)/hw/mcu/nordic/nrfx \
+	$(TOP)/hw/mcu/nordic/nrfx/mdk \
+	$(TOP)/hw/mcu/nordic/nrfx/hal \
+	$(TOP)/hw/mcu/nordic/nrfx/drivers/include \
+	$(TOP)/hw/mcu/nordic/nrfx/drivers/src \
 
 SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S
 
 ASFLAGS += -D__HEAP_SIZE=0
-ASFLAGS += -DCONFIG_GPIO_AS_PINRESET
-ASFLAGS += -DBLE_STACK_SUPPORT_REQD
 ASFLAGS += -DSWI_DISABLE0
 ASFLAGS += -DFLOAT_ABI_HARD
 ASFLAGS += -DNRF52840_XXAA
 
+# For TinyUSB port source
 VENDOR = nordic
 CHIP_FAMILY = nrf5x
 
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM4F
+
+# For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
+JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink
diff --git a/hw/bsp/stm32f303disc/board.mk b/hw/bsp/stm32f303disc/board.mk
index c81717c49..8efa5e6ab 100644
--- a/hw/bsp/stm32f303disc/board.mk
+++ b/hw/bsp/stm32f303disc/board.mk
@@ -25,15 +25,21 @@ SRC_S += \
 	hw/mcu/st/startup/stm32f3/startup_stm32f303xc.s
 
 INC += \
-	-I$(TOP)/hw/bsp/stm32f303disc \
- 	-I$(TOP)/hw/mcu/st/cmsis \
-	-I$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F3xx/Include \
-	-I$(TOP)/hw/mcu/st/stm32lib/STM32F3xx_HAL_Driver/Inc
+	$(TOP)/hw/bsp/stm32f303disc \
+	$(TOP)/hw/mcu/st/cmsis \
+	$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F3xx/Include \
+	$(TOP)/hw/mcu/st/stm32lib/STM32F3xx_HAL_Driver/Inc
 
+# For TinyUSB port source
 VENDOR = st
 CHIP_FAMILY = stm32f3
 
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM4F
+
+# For flash-jlink target
 JLINK_DEVICE = stm32f303vc
+JLINK_IF = swd
 
 # Path to STM32 Cube Programmer CLI, should be added into system path 
 STM32Prog = STM32_Programmer_CLI
diff --git a/hw/bsp/stm32f407g_disc1/board.mk b/hw/bsp/stm32f407g_disc1/board.mk
index e966f998c..ad13c1047 100644
--- a/hw/bsp/stm32f407g_disc1/board.mk
+++ b/hw/bsp/stm32f407g_disc1/board.mk
@@ -21,13 +21,19 @@ SRC_S += \
 	hw/mcu/st/startup/stm32f4/startup_stm32f407xx.s
 
 INC += \
-	-I$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F4xx/Include \
-	-I$(TOP)/hw/mcu/st/cmsis
+	$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F4xx/Include \
+	$(TOP)/hw/mcu/st/cmsis
 
+# For TinyUSB port source
 VENDOR = st
 CHIP_FAMILY = stm32f4
 
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM4F
+
+# For flash-jlink target
 JLINK_DEVICE = stm32f407vg
+JLINK_IF = swd
 
 # Path to STM32 Cube Programmer CLI, should be added into system path 
 STM32Prog = STM32_Programmer_CLI