diff options
| author | hathach <[email protected]> | 2020-07-08 16:29:48 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2020-07-08 16:29:48 +0700 |
| commit | 0fd074afd85d84f162ddebbc9b8e009f9136809b (patch) | |
| tree | 5a3a3f232e9af6d8f282ec20e4be81ace4b87c29 /hw | |
| parent | f82655a21269bcb9472a07c4cda5f47d85dbc007 (diff) | |
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
update readme, boards.md to add link to new stm boards
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/bsp/stlinkv3mini/board.mk | 13 | ||||
| -rw-r--r-- | hw/bsp/stm32f723disco/board.mk | 18 | ||||
| -rw-r--r-- | hw/bsp/stm32f746disco/board.mk | 18 | ||||
| -rw-r--r-- | hw/bsp/stm32f769disco/board.mk | 14 |
4 files changed, 33 insertions, 30 deletions
diff --git a/hw/bsp/stlinkv3mini/board.mk b/hw/bsp/stlinkv3mini/board.mk index b77fb5a51..4ca6cfd68 100644 --- a/hw/bsp/stlinkv3mini/board.mk +++ b/hw/bsp/stlinkv3mini/board.mk @@ -1,6 +1,6 @@ # Only OTG-HS has a connector on this board -REDUCE_SPEED ?= 0 +SPEED ?= high CFLAGS += \ -flto \ @@ -14,12 +14,13 @@ CFLAGS += \ -DHSE_VALUE=25000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ -DBOARD_DEVICE_RHPORT_NUM=1 -ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") + +ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") endif # mcu driver cause following warnings diff --git a/hw/bsp/stm32f723disco/board.mk b/hw/bsp/stm32f723disco/board.mk index 47148ec4d..9ec23bfde 100644 --- a/hw/bsp/stm32f723disco/board.mk +++ b/hw/bsp/stm32f723disco/board.mk @@ -1,5 +1,5 @@ PORT ?= 1 -REDUCE_SPEED ?= 0 +SPEED ?= high CFLAGS += \ -flto \ @@ -15,15 +15,15 @@ CFLAGS += \ -DBOARD_DEVICE_RHPORT_NUM=$(PORT) ifeq ($(PORT), 1) - ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") - else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") - endif + ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") + else + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") + endif else -$(info "Using OTG_FS") + $(info "Using OTG_FS") endif # mcu driver cause following warnings diff --git a/hw/bsp/stm32f746disco/board.mk b/hw/bsp/stm32f746disco/board.mk index d7329a28f..48cb3f141 100644 --- a/hw/bsp/stm32f746disco/board.mk +++ b/hw/bsp/stm32f746disco/board.mk @@ -1,5 +1,5 @@ PORT ?= 0 -REDUCE_SPEED ?= 0 +SPEED ?= high CFLAGS += \ -flto \ @@ -15,15 +15,15 @@ CFLAGS += \ -DBOARD_DEVICE_RHPORT_NUM=$(PORT) ifeq ($(PORT), 1) - ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") - else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") - endif + ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") + else + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") + endif else -$(info "Using OTG_FS") + $(info "Using OTG_FS") endif # mcu driver cause following warnings diff --git a/hw/bsp/stm32f769disco/board.mk b/hw/bsp/stm32f769disco/board.mk index 43b677ddd..962dddc68 100644 --- a/hw/bsp/stm32f769disco/board.mk +++ b/hw/bsp/stm32f769disco/board.mk @@ -1,4 +1,6 @@ -REDUCE_SPEED ?= 0 +# Only OTG-HS has a connector on this board + +SPEED ?= high CFLAGS += \ -flto \ @@ -13,12 +15,12 @@ CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 \ -DBOARD_DEVICE_RHPORT_NUM=1 \ -ifeq ($(REDUCE_SPEED), 0) -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED -$(info "Using OTG_HS in HS mode") +ifeq ($(SPEED), high) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using OTG_HS in HighSpeed mode") else -CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED -$(info "Using OTG_HS in FS mode") + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED + $(info "Using OTG_HS in FullSpeed mode") endif # suppress warning caused by vendor mcu driver |