diff options
| author | Zixun LI <[email protected]> | 2025-12-16 11:51:42 +0100 |
|---|---|---|
| committer | Zixun LI <[email protected]> | 2025-12-16 11:51:42 +0100 |
| commit | 22534a60193c4616717cc86da851465f30bdd54a (patch) | |
| tree | 1ebdb835f69855461fa5712fdf9edf7b1170d66e /hw | |
| parent | dd78e2eeb5b4970e05e2ca5e6168befa5e9a2b80 (diff) | |
| parent | 77fcf62f9fba99a0344ba95d78130a5c0c921e56 (diff) | |
Merge remote-tracking branch 'tinyusb/master' into support-nxp-rw612
Signed-off-by: Zixun LI <[email protected]>
Diffstat (limited to 'hw')
59 files changed, 542 insertions, 134 deletions
diff --git a/hw/bsp/at32f403a_407/family.cmake b/hw/bsp/at32f403a_407/family.cmake index 498b89c1a..7aaa9ede8 100644 --- a/hw/bsp/at32f403a_407/family.cmake +++ b/hw/bsp/at32f403a_407/family.cmake @@ -61,6 +61,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/at32f403a_407/family.mk b/hw/bsp/at32f403a_407/family.mk index c82d402ca..f458881a3 100644 --- a/hw/bsp/at32f403a_407/family.mk +++ b/hw/bsp/at32f403a_407/family.mk @@ -16,6 +16,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \ diff --git a/hw/bsp/at32f413/family.cmake b/hw/bsp/at32f413/family.cmake index 02692daf5..33718bd1c 100644 --- a/hw/bsp/at32f413/family.cmake +++ b/hw/bsp/at32f413/family.cmake @@ -61,6 +61,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_clock.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${AT32_FAMILY}_int.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/at32f413/family.mk b/hw/bsp/at32f413/family.mk index 9c5d867de..abcd15d11 100644 --- a/hw/bsp/at32f413/family.mk +++ b/hw/bsp/at32f413/family.mk @@ -16,6 +16,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_gpio.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_misc.c \ $(AT32_SDK_LIB)/drivers/src/${AT32_FAMILY}_usart.c \ diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index d8c7c5327..59a96f70d 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -93,6 +93,7 @@ function(family_configure_example TARGET RTOS) ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ${TOP}/src/portable/wch/hcd_ch32_usbfs.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/ch32v20x/family.mk b/hw/bsp/ch32v20x/family.mk index 16fc537ac..7042ecbb7 100644 --- a/hw/bsp/ch32v20x/family.mk +++ b/hw/bsp/ch32v20x/family.mk @@ -47,6 +47,7 @@ SRC_C += \ src/portable/wch/dcd_ch32_usbfs.c \ src/portable/wch/hcd_ch32_usbfs.c \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(SDK_SRC_DIR)/Core/core_riscv.c \ $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_gpio.c \ $(SDK_SRC_DIR)/Peripheral/src/${CH32_FAMILY}_misc.c \ diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld b/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld index 8acd49f9d..6c7e203f1 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/STM32C071RBTx_FLASH.ld @@ -36,7 +36,7 @@ ENTRY(Reset_Handler) _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0xc00; /* required amount of stack */ /* Memories definition */ MEMORY diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake index 2a319a73c..ed70cffbf 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.cmake @@ -2,6 +2,7 @@ set(MCU_VARIANT stm32c071xx) set(JLINK_DEVICE stm32c071rb) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32C071RBTx_FLASH.ld) +set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/stm32c071xx_flash.icf) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h index 751df2251..460b42a21 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.h @@ -64,36 +64,30 @@ static inline void board_clock_init(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_CRSInitTypeDef RCC_CRSInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - /* -1- Enable HSIUSB48 Oscillator */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48; - RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; + __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_1); + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; HAL_RCC_OscConfig(&RCC_OscInitStruct); - /* -2- Initializes the CPU, AHB and APB buses clocks */ + /** Initializes the CPU, AHB and APB buses clocks + */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSIUSB48; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSE; RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1); - - __HAL_RCC_CRS_CLK_ENABLE(); - - // Configures CRS - RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; - RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; - RCC_CRSInitStruct.Polarity = RCC_CRS_SYNC_POLARITY_RISING; - RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000,1000); - RCC_CRSInitStruct.ErrorLimitValue = 34; - RCC_CRSInitStruct.HSI48CalibrationValue = 32; - - HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct); + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_HSE; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit); } - #endif /* BOARD_H_ */ diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk index 67a9b59a8..fd22fc8d4 100644 --- a/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/board.mk @@ -7,7 +7,7 @@ LD_FILE_GCC = $(BOARD_PATH)/STM32C071RBTx_FLASH.ld # IAR SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32c071xx.s -LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32c071xx_flash.icf +LD_FILE_IAR = $(BOARD_PATH)/stm32c071xx_flash.icf # For flash-jlink target JLINK_DEVICE = stm32c071rb diff --git a/hw/bsp/stm32c0/boards/stm32c071nucleo/stm32c071xx_flash.icf b/hw/bsp/stm32c0/boards/stm32c071nucleo/stm32c071xx_flash.icf new file mode 100644 index 000000000..684f41dc6 --- /dev/null +++ b/hw/bsp/stm32c0/boards/stm32c071nucleo/stm32c071xx_flash.icf @@ -0,0 +1,33 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20005FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0xc00; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; + +export symbol __ICFEDIT_region_RAM_start__; +export symbol __ICFEDIT_region_RAM_end__; diff --git a/hw/bsp/stm32c0/family.c b/hw/bsp/stm32c0/family.c index ba8b14dd1..e2ba47f45 100644 --- a/hw/bsp/stm32c0/family.c +++ b/hw/bsp/stm32c0/family.c @@ -37,13 +37,13 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void USB_DRD_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } // Startup code generated by STM32CubeIDE uses USB_IRQHandler, while // stm32c071xx.s from cmsis_device_c0 uses USB_DRD_FS_IRQHandler. void USB_IRQHandler(void) { - USB_DRD_FS_IRQHandler(); + tusb_int_handler(0, true); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index 90d5322b7..dc1a2bb13 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -24,7 +24,6 @@ set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) set(LD_FILE_Clang ${LD_FILE_GNU}) -set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) #------------------------------------ # BOARD_TARGET @@ -67,6 +66,8 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32c0/family.mk b/hw/bsp/stm32c0/family.mk index bdb34454e..71209bf2e 100644 --- a/hw/bsp/stm32c0/family.mk +++ b/hw/bsp/stm32c0/family.mk @@ -29,6 +29,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32c0/stm32c0xx_hal_conf.h b/hw/bsp/stm32c0/stm32c0xx_hal_conf.h index 678b6ee0d..874251c7f 100644 --- a/hw/bsp/stm32c0/stm32c0xx_hal_conf.h +++ b/hw/bsp/stm32c0/stm32c0xx_hal_conf.h @@ -92,7 +92,7 @@ extern "C" { * (when HSE is used as system clock source, directly or through the PLL). */ #if !defined (HSE_VALUE) -#define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#define HSE_VALUE (48000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSE_STARTUP_TIMEOUT) diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index ee73ae872..a926a9739 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -65,6 +65,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32f0/family.mk b/hw/bsp/stm32f0/family.mk index 9b8305874..b5efdcb8d 100644 --- a/hw/bsp/stm32f0/family.mk +++ b/hw/bsp/stm32f0/family.mk @@ -30,6 +30,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 064f32096..9e94d86c6 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -62,6 +62,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk index ca95f2315..d4b6dfa6c 100644 --- a/hw/bsp/stm32f1/family.mk +++ b/hw/bsp/stm32f1/family.mk @@ -27,6 +27,7 @@ LDFLAGS_GCC += \ # ------------------------ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ ${ST_CMSIS}/Source/Templates/system_stm32${ST_FAMILY}xx.c \ ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal.c \ ${ST_HAL_DRIVER}/Src/stm32${ST_FAMILY}xx_hal_cortex.c \ diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 7c9e97e62..3cbb4e1cd 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -62,6 +62,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32f3/family.mk b/hw/bsp/stm32f3/family.mk index 13734583a..eb4a4e186 100644 --- a/hw/bsp/stm32f3/family.mk +++ b/hw/bsp/stm32f3/family.mk @@ -19,6 +19,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32g0/family.c b/hw/bsp/stm32g0/family.c index 7b86aedb4..4b175b0ec 100644 --- a/hw/bsp/stm32g0/family.c +++ b/hw/bsp/stm32g0/family.c @@ -37,7 +37,7 @@ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void USB_UCPD1_2_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 572f0e644..4b520a0e1 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -64,6 +64,8 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32g0/family.mk b/hw/bsp/stm32g0/family.mk index d735ca92d..e376f7f06 100644 --- a/hw/bsp/stm32g0/family.mk +++ b/hw/bsp/stm32g0/family.mk @@ -29,6 +29,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index 7e8b319b8..85201ce61 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -62,6 +62,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk index 0abd73532..a153194ce 100644 --- a/hw/bsp/stm32g4/family.mk +++ b/hw/bsp/stm32g4/family.mk @@ -29,6 +29,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ src/portable/st/typec/typec_stm32.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake index 1a44c3f1d..5978758fc 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.cmake @@ -6,4 +6,7 @@ function(update_board TARGET) STM32H503xx HSE_VALUE=24000000 ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_EXAMPLE_VIDEO_READONLY + ) endfunction() diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h index c8b5e31f5..9dd2b0466 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.h @@ -37,24 +37,33 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_5 -#define LED_STATE_ON 1 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for STLink VCOM -#define UART_DEV USART3 -#define UART_CLK_EN __USART3_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF13_USART3 - -#define UART_TX_PIN GPIO_PIN_3 -#define UART_RX_PIN GPIO_PIN_4 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_5, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_3, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF13_USART3 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF13_USART3 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -120,6 +129,15 @@ static inline void SystemClock_Config(void) { __HAL_RCC_USB_CLK_ENABLE(); } +static inline void board_init2(void) { + // Empty for this board +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk index 0292353ae..497dd894e 100644 --- a/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk +++ b/hw/bsp/stm32h5/boards/stm32h503nucleo/board.mk @@ -3,6 +3,7 @@ MCU_VARIANT = stm32h503xx CFLAGS += \ -DSTM32H503xx \ -DHSE_VALUE=24000000 \ + -DCFG_EXAMPLE_VIDEO_READONLY \ # For flash-jlink target JLINK_DEVICE = stm32h503rb diff --git a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h index adc3d751a..20c91f606 100644 --- a/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h +++ b/hw/bsp/stm32h5/boards/stm32h563nucleo/board.h @@ -37,24 +37,33 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOG -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 -// Button -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for STLink VCOM -#define UART_DEV USART1 -#define UART_CLK_EN __USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART1 - -#define UART_TX_PIN GPIO_PIN_9 -#define UART_RX_PIN GPIO_PIN_10 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_4, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 0 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -128,6 +137,15 @@ static inline void SystemClock_Config(void) { } } +static inline void board_init2(void) { + // Empty for this board +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) rhport; + (void) state; +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake index 92d6d98f0..76194ee91 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.cmake @@ -5,4 +5,11 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32H573xx ) + target_sources(${TARGET} PUBLIC + ${ST_TCPP0203}/tcpp0203.c + ${ST_TCPP0203}/tcpp0203_reg.c + ) + target_include_directories(${TARGET} PUBLIC + ${ST_TCPP0203} + ) endfunction() diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h index d75114397..5788837ab 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.h @@ -37,24 +37,63 @@ extern "C" { #endif -// LED -#define LED_PORT GPIOI -#define LED_PIN GPIO_PIN_9 -#define LED_STATE_ON 1 +#include "tcpp0203.h" -// Button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 -// UART Enable for STLink VCOM -#define UART_DEV USART1 -#define UART_CLK_EN __USART1_CLK_ENABLE -#define UART_GPIO_PORT GPIOA -#define UART_GPIO_AF GPIO_AF7_USART1 +#define PINID_LED 0 +#define PINID_BUTTON 1 +#define PINID_UART_TX 2 +#define PINID_UART_RX 3 +#define PINID_TCPP0203_EN 4 +#define PINID_I2C_SCL 5 +#define PINID_I2C_SDA 6 +#define PINID_TCPP0203_INT 7 -#define UART_TX_PIN GPIO_PIN_9 -#define UART_RX_PIN GPIO_PIN_10 +static board_pindef_t board_pindef[] = { + { // LED + .port = GPIOI, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // Button + .port = GPIOC, + .pin_init = { .Pin = GPIO_PIN_13, .Mode = GPIO_MODE_INPUT, .Pull = GPIO_PULLDOWN, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 1 + }, + { // UART TX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // UART RX + .port = GPIOA, + .pin_init = { .Pin = GPIO_PIN_10, .Mode = GPIO_MODE_AF_PP, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF7_USART1 }, + .active_state = 0 + }, + { // TCPP0203 VCC_EN + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_0, .Mode = GPIO_MODE_OUTPUT_PP, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_LOW, .Alternate = 0 }, + .active_state = 1 + }, + { // I2C4 SCL + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_8, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF6_I2C4 }, + .active_state = 0 + }, + { // I2C4 SDA + .port = GPIOB, + .pin_init = { .Pin = GPIO_PIN_9, .Mode = GPIO_MODE_AF_OD, .Pull = GPIO_NOPULL, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = GPIO_AF6_I2C4 }, + .active_state = 0 + }, + { // TCPP0203 INT + .port = GPIOG, + .pin_init = { .Pin = GPIO_PIN_1, .Mode = GPIO_MODE_IT_FALLING, .Pull = GPIO_PULLUP, .Speed = GPIO_SPEED_FREQ_HIGH, .Alternate = 0 }, + .active_state = 0 + }, +}; //--------------------------------------------------------------------+ // RCC Clock @@ -113,6 +152,89 @@ static inline void SystemClock_Config(void) { __HAL_RCC_USB_CLK_ENABLE(); } +//--------------------------------------------------------------------+ +// USB PD +//--------------------------------------------------------------------+ +static I2C_HandleTypeDef i2c_handle = { + .Instance = I2C4, + .Init = { + .Timing = 0x20C0EDFF, // 100kHz @ 250MHz + .OwnAddress1 = 0, + .AddressingMode = I2C_ADDRESSINGMODE_7BIT, + .DualAddressMode = I2C_DUALADDRESS_DISABLE, + .OwnAddress2 = 0, + .OwnAddress2Masks = I2C_OA2_NOMASK, + .GeneralCallMode = I2C_GENERALCALL_DISABLE, + .NoStretchMode = I2C_NOSTRETCH_DISABLE, + } +}; +static TCPP0203_Object_t tcpp0203_obj = { 0 }; + +int32_t board_tcpp0203_init(void) { + // Enable TCPP0203 VCC (GPIO already configured in pindef array) + board_pindef_t* pindef = &board_pindef[PINID_TCPP0203_EN]; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, GPIO_PIN_SET); + + // Initialize I2C4 for TCPP0203 (GPIO already configured in pindef array) + __HAL_RCC_I2C4_CLK_ENABLE(); + __HAL_RCC_I2C4_FORCE_RESET(); + __HAL_RCC_I2C4_RELEASE_RESET(); + if (HAL_I2C_Init(&i2c_handle) != HAL_OK) { + return HAL_ERROR; + } + + // Enable interrupt for TCPP0203 FLGn (GPIO already configured in pindef array) + NVIC_SetPriority(EXTI1_IRQn, 12); + NVIC_EnableIRQ(EXTI1_IRQn); + + return 0; +} + +int32_t board_tcpp0203_deinit(void) { + return 0; +} + +int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { + TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); + return 0; +} + +static inline void board_init2(void) { + TCPP0203_IO_t io_ctx; + + io_ctx.Address = TCPP0203_I2C_ADDRESS_X68; + io_ctx.Init = board_tcpp0203_init; + io_ctx.DeInit = board_tcpp0203_deinit; + io_ctx.ReadReg = i2c_readreg; + io_ctx.WriteReg = i2c_writereg; + + TU_ASSERT(TCPP0203_RegisterBusIO(&tcpp0203_obj, &io_ctx) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_Init(&tcpp0203_obj) == TCPP0203_OK, ); + + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); +} + +void board_vbus_set(uint8_t rhport, bool state) { + (void) state; + if (rhport == 0) { + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + +void EXTI1_IRQHandler(void) { + __HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_1); + if (tcpp0203_obj.IsInitialized) { + TU_ASSERT(TCPP0203_SetPowerMode(&tcpp0203_obj, TCPP0203_POWER_MODE_NORMAL) == TCPP0203_OK, ); + TU_ASSERT(TCPP0203_SetGateDriverProvider(&tcpp0203_obj, TCPP0203_GD_PROVIDER_SWITCH_CLOSED) == TCPP0203_OK, ); + } +} + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk index b24acf89f..49743e7cd 100644 --- a/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk +++ b/hw/bsp/stm32h5/boards/stm32h573i_dk/board.mk @@ -5,3 +5,10 @@ CFLAGS += \ # For flash-jlink target JLINK_DEVICE = stm32h573ii + +SRC_C += \ + $(ST_TCPP0203)/tcpp0203.c \ + $(ST_TCPP0203)/tcpp0203_reg.c \ + +INC += \ + $(TOP)/$(ST_TCPP0203) \ diff --git a/hw/bsp/stm32h5/family.c b/hw/bsp/stm32h5/family.c index 983944b1c..fdb12e44f 100644 --- a/hw/bsp/stm32h5/family.c +++ b/hw/bsp/stm32h5/family.c @@ -46,20 +46,38 @@ TU_ATTR_UNUSED static void Error_Handler(void) { } +typedef struct { + GPIO_TypeDef* port; + GPIO_InitTypeDef pin_init; + uint8_t active_state; +} board_pindef_t; + #include "board.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ void USB_DRD_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ #ifdef UART_DEV -UART_HandleTypeDef UartHandle; +static UART_HandleTypeDef UartHandle = { + .Instance = UART_DEV, + .Init = { + .BaudRate = CFG_BOARD_UART_BAUDRATE, + .WordLength = UART_WORDLENGTH_8B, + .StopBits = UART_STOPBITS_1, + .Parity = UART_PARITY_NONE, + .HwFlowCtl = UART_HWCONTROL_NONE, + .Mode = UART_MODE_TX_RX, + .OverSampling = UART_OVERSAMPLING_16, + .AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT + } +}; #endif void board_init(void) { @@ -95,51 +113,18 @@ void board_init(void) { NVIC_SetPriority(USB_DRD_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + for (uint8_t i = 0; i < TU_ARRAY_SIZE(board_pindef); i++) { + HAL_GPIO_Init(board_pindef[i].port, &board_pindef[i].pin_init); + } #ifdef UART_DEV UART_CLK_EN(); - - // UART - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle = (UART_HandleTypeDef) { - .Instance = UART_DEV, - .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, - .Init.WordLength = UART_WORDLENGTH_8B, - .Init.StopBits = UART_STOPBITS_1, - .Init.Parity = UART_PARITY_NONE, - .Init.HwFlowCtl = UART_HWCONTROL_NONE, - .Init.Mode = UART_MODE_TX_RX, - .Init.OverSampling = UART_OVERSAMPLING_16, - .AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT - }; HAL_UART_Init(&UartHandle); #endif // USB Pins TODO double check USB clock and pin setup // Configure USB DM and DP pins. This is optional, and maintained only for user guidance. + GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_NOPULL; @@ -153,6 +138,12 @@ void board_init(void) { #if defined (PWR_USBSCR_USB33DEN) HAL_PWREx_EnableVddUSB(); #endif + + board_init2(); + +#if CFG_TUH_ENABLED + board_vbus_set(BOARD_TUH_RHPORT, 1); +#endif } //--------------------------------------------------------------------+ @@ -160,12 +151,22 @@ void board_init(void) { //--------------------------------------------------------------------+ void board_led_write(bool state) { - GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1 - LED_STATE_ON)); - HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); +#ifdef PINID_LED + board_pindef_t* pindef = &board_pindef[PINID_LED]; + GPIO_PinState pin_state = state == pindef->active_state ? GPIO_PIN_SET : GPIO_PIN_RESET; + HAL_GPIO_WritePin(pindef->port, pindef->pin_init.Pin, pin_state); +#else + (void) state; +#endif } uint32_t board_button_read(void) { - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +#ifdef PINID_BUTTON + board_pindef_t* pindef = &board_pindef[PINID_BUTTON]; + return pindef->active_state == HAL_GPIO_ReadPin(pindef->port, pindef->pin_init.Pin); +#else + return 0; +#endif } size_t board_get_unique_id(uint8_t id[], size_t max_len) { diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 6e63c4072..a8780d165 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -5,6 +5,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(ST_TCPP0203 ${TOP}/hw/mcu/st/stm32-tcpp0203) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # include board specific @@ -26,7 +27,7 @@ set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) set(LD_FILE_Clang ${LD_FILE_GNU}) -set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) +set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/linker/${MCU_VARIANT}_flash.icf) #------------------------------------ # BOARD_TARGET @@ -44,6 +45,7 @@ function(family_add_board BOARD_TARGET) ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_i2c.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR} @@ -66,6 +68,8 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/st/typec/typec_stm32.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) diff --git a/hw/bsp/stm32h5/family.mk b/hw/bsp/stm32h5/family.mk index 792edb2bb..89a2eddd5 100644 --- a/hw/bsp/stm32h5/family.mk +++ b/hw/bsp/stm32h5/family.mk @@ -1,6 +1,7 @@ ST_FAMILY = h5 ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver +ST_TCPP0203 = hw/mcu/st/stm32-tcpp0203 include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m33 @@ -36,6 +37,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld index abf618233..169ac81b7 100644 --- a/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H503xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ diff --git a/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld index b799892c6..633fc280e 100644 --- a/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H523xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld index dece7a003..4d010cf9e 100644 --- a/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H533xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld index aee2774a4..aeb799d63 100644 --- a/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H562xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld index 129ed5170..2e8d38319 100644 --- a/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H563xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld b/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld index eb98f3163..dd00557c0 100644 --- a/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld +++ b/hw/bsp/stm32h5/linker/STM32H573xx_FLASH.ld @@ -46,7 +46,7 @@ MEMORY _estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ _Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ +_Min_Stack_Size = 0x1000; /* required amount of stack */ /* Sections */ SECTIONS diff --git a/hw/bsp/stm32h5/linker/stm32h503xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h503xx_flash.icf new file mode 100644 index 000000000..c5b783b1a --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h503xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h523xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h523xx_flash.icf new file mode 100644 index 000000000..dc97788ae --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h523xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20043FFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h562xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h562xx_flash.icf new file mode 100644 index 000000000..b399851a3 --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h562xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x081FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2009FFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h563xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h563xx_flash.icf new file mode 100644 index 000000000..b399851a3 --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h563xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x081FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2009FFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/linker/stm32h573xx_flash.icf b/hw/bsp/stm32h5/linker/stm32h573xx_flash.icf new file mode 100644 index 000000000..b399851a3 --- /dev/null +++ b/hw/bsp/stm32h5/linker/stm32h573xx_flash.icf @@ -0,0 +1,32 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x081FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2009FFFF; + +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x1000; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/hw/bsp/stm32h5/stm32h5xx_hal_conf.h b/hw/bsp/stm32h5/stm32h5xx_hal_conf.h index d017bb06b..b4c64d56e 100644 --- a/hw/bsp/stm32h5/stm32h5xx_hal_conf.h +++ b/hw/bsp/stm32h5/stm32h5xx_hal_conf.h @@ -43,7 +43,6 @@ extern "C" { /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_FDCAN_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ @@ -65,6 +64,7 @@ extern "C" { #define HAL_PWR_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED #define HAL_UART_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED /* ########################## Register Callbacks selection ############################## */ /** diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index b6b0139a0..3f6622f71 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -66,6 +66,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk index 921b1b413..0ae881fdf 100644 --- a/hw/bsp/stm32l0/family.mk +++ b/hw/bsp/stm32l0/family.mk @@ -27,6 +27,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 5bc28dd5d..b1659d47a 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -67,6 +67,7 @@ function(family_configure_example TARGET RTOS) ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk index 01d059236..fd11fd226 100644 --- a/hw/bsp/stm32l4/family.mk +++ b/hw/bsp/stm32l4/family.mk @@ -34,6 +34,7 @@ SRC_C += \ src/portable/synopsys/dwc2/hcd_dwc2.c \ src/portable/synopsys/dwc2/dwc2_common.c \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32u0/family.cmake b/hw/bsp/stm32u0/family.cmake index 4f9b03109..2d3819cba 100644 --- a/hw/bsp/stm32u0/family.cmake +++ b/hw/bsp/stm32u0/family.cmake @@ -67,6 +67,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32u0/family.mk b/hw/bsp/stm32u0/family.mk index d5a850050..5f25906d3 100644 --- a/hw/bsp/stm32u0/family.mk +++ b/hw/bsp/stm32u0/family.mk @@ -27,6 +27,7 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ diff --git a/hw/bsp/stm32u5/family.c b/hw/bsp/stm32u5/family.c index 0af497366..26d72d6a0 100644 --- a/hw/bsp/stm32u5/family.c +++ b/hw/bsp/stm32u5/family.c @@ -51,14 +51,21 @@ TU_ATTR_UNUSED static void Error_Handler(void) { //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ +#ifdef USB_DRD_FS +void USB_IRQHandler(void) { + tusb_int_handler(0, true); +} +#endif +#ifdef USB_OTG_FS void OTG_FS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } - +#endif +#ifdef USB_OTG_HS void OTG_HS_IRQHandler(void) { - tud_int_handler(0); + tusb_int_handler(0, true); } - +#endif //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM //--------------------------------------------------------------------+ diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 70e0c313c..58dc63ae3 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -66,6 +66,8 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/hcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk index 3694b1ca0..47aed10a9 100644 --- a/hw/bsp/stm32u5/family.mk +++ b/hw/bsp/stm32u5/family.mk @@ -37,12 +37,10 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c -ifeq ($(MCU_VARIANT),stm32u545xx) +ifneq ($(filter stm32u545xx stm32u535xx,$(MCU_VARIANT)),) SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c -else ifeq ($(MCU_VARIANT),stm32u535xx) -SRC_C += \ - src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c else SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index 1a96e3d7e..6703a9b19 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -67,6 +67,7 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ${TOP}/src/portable/st/stm32_fsdev/fsdev_common.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${TARGET} PUBLIC diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index a80ff6f5b..0b1a51cec 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -20,6 +20,7 @@ LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ + src/portable/st/stm32_fsdev/fsdev_common.c \ $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ |