diff options
| author | hathach <[email protected]> | 2019-11-24 21:22:42 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2019-11-24 21:22:42 +0700 |
| commit | 24b2cea139238df8daf278abc9777b95ab60bc16 (patch) | |
| tree | 1836dfe07b2938099cdbf912ff545f5ec114c11c /hw | |
| parent | 3d748e6e2eb9561ce27d5239f97aeb1d0d45f1e2 (diff) | |
| parent | 64b05a1d5f312e754bba79f9b38ac5e9ca281a66 (diff) | |
Merge branch 'master' into port-samg55
Diffstat (limited to 'hw')
95 files changed, 5726 insertions, 326 deletions
diff --git a/hw/bsp/circuitplayground_bluefruit/board.mk b/hw/bsp/circuitplayground_bluefruit/board.mk index 72b9ddfbe..bfeaa2355 100644 --- a/hw/bsp/circuitplayground_bluefruit/board.mk +++ b/hw/bsp/circuitplayground_bluefruit/board.mk @@ -1,11 +1,12 @@ CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ - -DNRF52840_XXAA \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ + -DNRF52840_XXAA \ -DCONFIG_GPIO_AS_PINRESET # nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 @@ -23,17 +24,17 @@ LD_FILE = hw/bsp/circuitplayground_bluefruit/nrf52840_s140_v6.ld LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk SRC_C += \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ - hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ + hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \ INC += \ - $(TOP)/hw/mcu/nordic/cmsis/Include \ - $(TOP)/hw/mcu/nordic \ - $(TOP)/hw/mcu/nordic/nrfx \ - $(TOP)/hw/mcu/nordic/nrfx/mdk \ - $(TOP)/hw/mcu/nordic/nrfx/hal \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ + $(TOP)/hw/mcu/nordic/cmsis/Include \ + $(TOP)/hw/mcu/nordic \ + $(TOP)/hw/mcu/nordic/nrfx \ + $(TOP)/hw/mcu/nordic/nrfx/mdk \ + $(TOP)/hw/mcu/nordic/nrfx/hal \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S diff --git a/hw/bsp/circuitplayground_express/board.mk b/hw/bsp/circuitplayground_express/board.mk index 158f543b3..115a81187 100644 --- a/hw/bsp/circuitplayground_express/board.mk +++ b/hw/bsp/circuitplayground_express/board.mk @@ -11,23 +11,23 @@ CFLAGS += \ LD_FILE = hw/bsp/circuitplayground_express/samd21g18a_flash.ld SRC_C += \ - hw/mcu/microchip/samd/asf4/samd21/gcc/gcc/startup_samd21.c \ - hw/mcu/microchip/samd/asf4/samd21/gcc/system_samd21.c \ - hw/mcu/microchip/samd/asf4/samd21/hpl/gclk/hpl_gclk.c \ - hw/mcu/microchip/samd/asf4/samd21/hpl/pm/hpl_pm.c \ - hw/mcu/microchip/samd/asf4/samd21/hpl/sysctrl/hpl_sysctrl.c \ - hw/mcu/microchip/samd/asf4/samd21/hal/src/hal_atomic.c + hw/mcu/microchip/samd/asf4/samd21/gcc/gcc/startup_samd21.c \ + hw/mcu/microchip/samd/asf4/samd21/gcc/system_samd21.c \ + hw/mcu/microchip/samd/asf4/samd21/hpl/gclk/hpl_gclk.c \ + hw/mcu/microchip/samd/asf4/samd21/hpl/pm/hpl_pm.c \ + hw/mcu/microchip/samd/asf4/samd21/hpl/sysctrl/hpl_sysctrl.c \ + hw/mcu/microchip/samd/asf4/samd21/hal/src/hal_atomic.c INC += \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/ \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/config \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/include \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/include \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/utils/include \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd51/hpl/pm/ \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hpl/port \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hri \ - $(TOP)/hw/mcu/microchip/samd/asf4/samd21/CMSIS/Include + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/ \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/config \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/include \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/include \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hal/utils/include \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd51/hpl/pm/ \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hpl/port \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/hri \ + $(TOP)/hw/mcu/microchip/samd/asf4/samd21/CMSIS/Include # For TinyUSB port source VENDOR = microchip diff --git a/hw/bsp/ea4088qs/board.mk b/hw/bsp/ea4088qs/board.mk index 46625ca84..a88976d3a 100644 --- a/hw/bsp/ea4088qs/board.mk +++ b/hw/bsp/ea4088qs/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ @@ -11,14 +12,11 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc40xx/lpc_chip_40xx +MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx # All source paths should be relative to the top level. LD_FILE = hw/bsp/ea4088qs/lpc4088.ld -# TODO remove later -SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c - SRC_C += \ $(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ diff --git a/hw/bsp/ea4088qs/ea4088qs.c b/hw/bsp/ea4088qs/ea4088qs.c index 8adb61fda..83b2d6b1e 100644 --- a/hw/bsp/ea4088qs/ea4088qs.c +++ b/hw/bsp/ea4088qs/ea4088qs.c @@ -114,6 +114,21 @@ void board_init(void) } //--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + + +//--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ diff --git a/hw/bsp/ea4357/board.mk b/hw/bsp/ea4357/board.mk index 823481baf..098fb4c90 100644 --- a/hw/bsp/ea4357/board.mk +++ b/hw/bsp/ea4357/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ @@ -10,14 +11,11 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc43xx/lpc_chip_43xx +MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx # All source paths should be relative to the top level. LD_FILE = hw/bsp/ea4357/lpc4357.ld -# TODO remove later -SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c - SRC_C += \ $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ $(MCU_DIR)/src/chip_18xx_43xx.c \ @@ -34,7 +32,7 @@ INC += \ # For TinyUSB port source VENDOR = nxp -CHIP_FAMILY = lpc18_43 +CHIP_FAMILY = transdimension # For freeRTOS port source FREERTOS_PORT = ARM_CM4 diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index c276f10d3..f5d2a199e 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -166,19 +166,19 @@ void board_init(void) #if CFG_TUSB_RHPORT0_MODE Chip_USB0_Init(); - // Reset controller - LPC_USB0->USBCMD_D |= 0x02; - while( LPC_USB0->USBCMD_D & 0x02 ) {} - - // Set mode - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); - - LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging - #else // TODO OTG - LPC_USB0->USBMODE_D = USBMODE_DEVICE; - LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/; - #endif +// // Reset controller +// LPC_USB0->USBCMD_D |= 0x02; +// while( LPC_USB0->USBCMD_D & 0x02 ) {} +// +// // Set mode +// #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST +// LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); +// +// LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging +// #else // TODO OTG +// LPC_USB0->USBMODE_D = USBMODE_DEVICE; +// LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/; +// #endif #endif /* USB1 @@ -202,19 +202,19 @@ void board_init(void) #if CFG_TUSB_RHPORT1_MODE Chip_USB1_Init(); - // Reset controller - LPC_USB1->USBCMD_D |= 0x02; - while( LPC_USB1->USBCMD_D & 0x02 ) {} - - // Set mode - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); - #else // TODO OTG - LPC_USB1->USBMODE_D = USBMODE_DEVICE; - #endif - - // USB1 as fullspeed - LPC_USB1->PORTSC1_D |= (1<<24); +// // Reset controller +// LPC_USB1->USBCMD_D |= 0x02; +// while( LPC_USB1->USBCMD_D & 0x02 ) {} +// +// // Set mode +// #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST +// LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); +// #else // TODO OTG +// LPC_USB1->USBMODE_D = USBMODE_DEVICE; +// #endif +// +// // USB1 as fullspeed +// LPC_USB1->PORTSC1_D |= (1<<24); #endif // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) @@ -231,6 +231,31 @@ void board_init(void) } //--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_isr(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_isr(1); + #endif +} + +//--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ diff --git a/hw/bsp/feather_m0_express/board.mk b/hw/bsp/feather_m0_express/board.mk index b7ba0b0e1..fe1913331 100644 --- a/hw/bsp/feather_m0_express/board.mk +++ b/hw/bsp/feather_m0_express/board.mk @@ -1,10 +1,11 @@ CFLAGS += \ - -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ - -D__SAMD21G18A__ \ + -flto \ -mthumb \ -mabi=aapcs-linux \ -mcpu=cortex-m0plus \ -nostdlib -nostartfiles \ + -D__SAMD21G18A__ \ + -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ -DCFG_TUSB_MCU=OPT_MCU_SAMD21 # All source paths should be relative to the top level. diff --git a/hw/bsp/feather_m4_express/board.mk b/hw/bsp/feather_m4_express/board.mk index c62d9bc33..010e4b868 100644 --- a/hw/bsp/feather_m4_express/board.mk +++ b/hw/bsp/feather_m4_express/board.mk @@ -1,11 +1,12 @@ CFLAGS += \ - -D__SAMD51J19A__ \ + -flto \ -mthumb \ -mabi=aapcs-linux \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -D__SAMD51J19A__ \ -DCFG_TUSB_MCU=OPT_MCU_SAMD51 CFLAGS += -Wno-error=undef diff --git a/hw/bsp/feather_nrf52840_express/board.mk b/hw/bsp/feather_nrf52840_express/board.mk index 1e077bac7..b4d6fbe9f 100644 --- a/hw/bsp/feather_nrf52840_express/board.mk +++ b/hw/bsp/feather_nrf52840_express/board.mk @@ -1,11 +1,12 @@ CFLAGS += \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ - -DNRF52840_XXAA \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DCFG_TUSB_MCU=OPT_MCU_NRF5X \ + -DNRF52840_XXAA \ -DCONFIG_GPIO_AS_PINRESET # nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 @@ -23,17 +24,17 @@ LD_FILE = hw/bsp/feather_nrf52840_express/nrf52840_s140_v6.ld LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk SRC_C += \ - hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ - hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ + hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \ INC += \ - $(TOP)/hw/mcu/nordic/cmsis/Include \ - $(TOP)/hw/mcu/nordic \ - $(TOP)/hw/mcu/nordic/nrfx \ - $(TOP)/hw/mcu/nordic/nrfx/mdk \ - $(TOP)/hw/mcu/nordic/nrfx/hal \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ - $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ + $(TOP)/hw/mcu/nordic/cmsis/Include \ + $(TOP)/hw/mcu/nordic \ + $(TOP)/hw/mcu/nordic/nrfx \ + $(TOP)/hw/mcu/nordic/nrfx/mdk \ + $(TOP)/hw/mcu/nordic/nrfx/hal \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S diff --git a/hw/bsp/feather_stm32f405/board.mk b/hw/bsp/feather_stm32f405/board.mk index ef9777976..1e68737b9 100644 --- a/hw/bsp/feather_stm32f405/board.mk +++ b/hw/bsp/feather_stm32f405/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=12000000 \ - -DSTM32F405xx \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -DSTM32F405xx \ + -DHSE_VALUE=12000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver @@ -20,7 +21,8 @@ SRC_C += \ $(ST_HAL_DRIVER)/Src/stm32f4xx_hal.c \ $(ST_HAL_DRIVER)/Src/stm32f4xx_hal_cortex.c \ $(ST_HAL_DRIVER)/Src/stm32f4xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32f4xx_hal_gpio.c + $(ST_HAL_DRIVER)/Src/stm32f4xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32f4xx_hal_uart.c SRC_S += \ $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s @@ -46,5 +48,5 @@ JLINK_IF = swd STM32Prog = STM32_Programmer_CLI # flash target using on-board stlink -flash: $(BUILD)/$(BOARD)-firmware.elf - $(STM32Prog) --connect port=swd --write $< --go +flash: $(BUILD)/$(BOARD)-firmware.bin + dfu-util -R -a 0 --dfuse-address 0x08000000 -D $< diff --git a/hw/bsp/feather_stm32f405/feather_stm32f405.c b/hw/bsp/feather_stm32f405/feather_stm32f405.c index 0bc40ece0..aec779ea3 100644 --- a/hw/bsp/feather_stm32f405/feather_stm32f405.c +++ b/hw/bsp/feather_stm32f405/feather_stm32f405.c @@ -31,7 +31,7 @@ // Blue LED is chosen because the other LEDs are connected to ST-LINK lines. #define LED_PORT GPIOC -#define LED_PIN GPIO_PIN_4 +#define LED_PIN GPIO_PIN_1 #define LED_STATE_ON 1 // Pin D5 @@ -39,6 +39,24 @@ #define BUTTON_PIN GPIO_PIN_7 #define BUTTON_STATE_ACTIVE 0 +#define UARTx USART3 +#define UART_GPIO_PORT GPIOB +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_10 +#define UART_RX_PIN GPIO_PIN_11 + +UART_HandleTypeDef UartHandle; + + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) +{ + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOC_CLK_ENABLE(); // LED, Button + __HAL_RCC_GPIOB_CLK_ENABLE(); // Uart tx, rx + __HAL_RCC_USART3_CLK_ENABLE(); // Uart module +} + /** * @brief System Clock Configuration * The system Clock is configured as follow : @@ -104,14 +122,13 @@ void board_init(void) #endif SystemClock_Config(); - - // Notify runtime of frequency change. SystemCoreClockUpdate(); + all_rcc_clk_enable(); + GPIO_InitTypeDef GPIO_InitStruct; // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); GPIO_InitStruct.Pin = LED_PIN; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; GPIO_InitStruct.Pull = GPIO_PULLUP; @@ -121,19 +138,25 @@ void board_init(void) board_led_write(false); // Button - //__HAL_RCC_GPIOC_CLK_ENABLE(); GPIO_InitStruct.Pin = BUTTON_PIN; GPIO_InitStruct.Mode = GPIO_MODE_INPUT; GPIO_InitStruct.Pull = GPIO_PULLUP; GPIO_InitStruct.Speed = GPIO_SPEED_FAST; HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + // Enable USB OTG clock __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); // USB Pin Init // PA9- VUSB, PA10- ID, PA11- DM, PA12- DP - __HAL_RCC_GPIOA_CLK_ENABLE(); /* Configure DM DP Pins */ GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; @@ -180,8 +203,8 @@ int board_uart_read(uint8_t* buf, int len) int board_uart_write(void const * buf, int len) { - (void) buf; (void) len; - return 0; + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; } #if CFG_TUSB_OS == OPT_OS_NONE diff --git a/hw/bsp/feather_stm32f405/stm32f4xx_hal_conf.h b/hw/bsp/feather_stm32f405/stm32f4xx_hal_conf.h index dbef20e0a..b892df3b6 100644 --- a/hw/bsp/feather_stm32f405/stm32f4xx_hal_conf.h +++ b/hw/bsp/feather_stm32f405/stm32f4xx_hal_conf.h @@ -75,7 +75,7 @@ /* #define HAL_MMC_MODULE_ENABLED */ /* #define HAL_SPI_MODULE_ENABLED */ /* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED /* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ @@ -199,6 +199,8 @@ #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ #define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ /* ########################## Assert Selection ############################## */ diff --git a/hw/bsp/fomu/board.mk b/hw/bsp/fomu/board.mk new file mode 100644 index 000000000..4e8101b7f --- /dev/null +++ b/hw/bsp/fomu/board.mk @@ -0,0 +1,30 @@ +CFLAGS += \ + -flto \ + -march=rv32i \ + -mabi=ilp32 \ + -nostdlib \ + -DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI + +MCU_DIR = hw/mcu/fomu +BSP_DIR = hw/bsp/fomu + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/fomu/fomu.ld + +# TODO remove later +SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c + +SRC_C += + +SRC_S += hw/bsp/fomu/crt0-vexriscv.S + +INC += \ + $(TOP)/$(BSP_DIR)/include + +# For TinyUSB port source +VENDOR = valentyusb +CHIP_FAMILY = eptri + +# flash using dfu-util +flash: $(BUILD)/$(BOARD)-firmware.dfu + dfu-util -D $^ diff --git a/hw/bsp/fomu/crt0-vexriscv.S b/hw/bsp/fomu/crt0-vexriscv.S new file mode 100644 index 000000000..d80a29e06 --- /dev/null +++ b/hw/bsp/fomu/crt0-vexriscv.S @@ -0,0 +1,83 @@ +.global main +.global isr + +.section .text.start +.global _start + +_start: + j crt_init + +.section .text +.global trap_entry +trap_entry: + sw x1, - 1*4(sp) + sw x5, - 2*4(sp) + sw x6, - 3*4(sp) + sw x7, - 4*4(sp) + sw x10, - 5*4(sp) + sw x11, - 6*4(sp) + sw x12, - 7*4(sp) + sw x13, - 8*4(sp) + sw x14, - 9*4(sp) + sw x15, -10*4(sp) + sw x16, -11*4(sp) + sw x17, -12*4(sp) + sw x28, -13*4(sp) + sw x29, -14*4(sp) + sw x30, -15*4(sp) + sw x31, -16*4(sp) + addi sp,sp,-16*4 + call isr + lw x1 , 15*4(sp) + lw x5, 14*4(sp) + lw x6, 13*4(sp) + lw x7, 12*4(sp) + lw x10, 11*4(sp) + lw x11, 10*4(sp) + lw x12, 9*4(sp) + lw x13, 8*4(sp) + lw x14, 7*4(sp) + lw x15, 6*4(sp) + lw x16, 5*4(sp) + lw x17, 4*4(sp) + lw x28, 3*4(sp) + lw x29, 2*4(sp) + lw x30, 1*4(sp) + lw x31, 0*4(sp) + addi sp,sp,16*4 + mret + +.text +crt_init: + la sp, _estack - 4 + la a0, trap_entry + csrw mtvec, a0 + +bss_init: + la a0, _sbss + la a1, _ebss + 4 +bss_loop: + beq a0,a1,bss_done + sw zero,0(a0) + add a0,a0,4 + j bss_loop +bss_done: + + /* Load DATA */ + la t0, _etext + la t1, _srelocate + la t2, _erelocate + 4 +3: + lw t3, 0(t0) + sw t3, 0(t1) + /* _edata is aligned to 4 bytes. Use word-xfers. */ + addi t0, t0, 4 + addi t1, t1, 4 + bltu t1, t2, 3b + + li a0, 0x880 //880 enable timer + external interrupt sources (until mstatus.MIE is set, they will never trigger an interrupt) + csrw mie,a0 + + call main +infinite_loop: + j infinite_loop diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c new file mode 100644 index 000000000..519c63630 --- /dev/null +++ b/hw/bsp/fomu/fomu.c @@ -0,0 +1,117 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include <stdint.h> +#include <stdbool.h> +#include "common/tusb_common.h" +#include "csr.h" +#include "irq.h" + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void hal_dcd_isr(uint8_t rhport); + +void fomu_error(uint32_t line) +{ + (void)line; + TU_BREAKPOINT(); +} + +volatile uint32_t system_ticks = 0; +static void timer_init(void) +{ + int t; + + timer0_en_write(0); + t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick + timer0_reload_write(t); + timer0_load_write(t); + timer0_en_write(1); + timer0_ev_enable_write(1); + timer0_ev_pending_write(1); + irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT)); +} + +void isr(void) +{ + unsigned int irqs; + + irqs = irq_pending() & irq_getmask(); + +#if CFG_TUSB_RHPORT0_MODE == OPT_MODE_DEVICE + if (irqs & (1 << USB_INTERRUPT)) { + hal_dcd_isr(0); + } +#endif + if (irqs & (1 << TIMER0_INTERRUPT)) { + system_ticks++; + timer0_ev_pending_write(1); + } +} + +void board_init(void) +{ + irq_setmask(0); + irq_setie(1); + timer_init(); + return; +} + +void board_led_write(bool state) +{ + rgb_ctrl_write(0xff); + rgb_raw_write(state); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + int32_t offset = 0; + for (offset = 0; offset < len; offset++) + if (! (messible_status_read() & CSR_MESSIBLE_STATUS_FULL_OFFSET)) + messible_in_write(((uint8_t *)buf)[offset]); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif
\ No newline at end of file diff --git a/hw/bsp/fomu/fomu.ld b/hw/bsp/fomu/fomu.ld new file mode 100644 index 000000000..13278d2ad --- /dev/null +++ b/hw/bsp/fomu/fomu.ld @@ -0,0 +1,104 @@ +OUTPUT_FORMAT("elf32-littleriscv") +ENTRY(_start) + +__DYNAMIC = 0; + +MEMORY { + csr : ORIGIN = 0x60000000, LENGTH = 0x01000000 + vexriscv_debug : ORIGIN = 0xf00f0000, LENGTH = 0x00000100 + ram : ORIGIN = 0x10000000, LENGTH = 0x00020000 + rom : ORIGIN = 0x20040000, LENGTH = 0x00200000 - 0x40000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(STACK_SIZE) ? STACK_SIZE : DEFINED(__stack_size__) ? __stack_size__ : 0x2000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _ftext = .; + *(.text.start) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + } > rom + + . = ALIGN(4); + _etext = .; /* End of text section */ + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(.sbss .sbss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/fomu/include/csr.h b/hw/bsp/fomu/include/csr.h new file mode 100644 index 000000000..a2f60ecf6 --- /dev/null +++ b/hw/bsp/fomu/include/csr.h @@ -0,0 +1,750 @@ +//-------------------------------------------------------------------------------- +// Auto-generated by Migen (f4fcd10) & LiteX (1425a68d) on 2019-11-12 19:41:49 +//-------------------------------------------------------------------------------- +#ifndef __GENERATED_CSR_H +#define __GENERATED_CSR_H +#include <stdint.h> +#ifdef CSR_ACCESSORS_DEFINED +extern void csr_writeb(uint8_t value, unsigned long addr); +extern uint8_t csr_readb(unsigned long addr); +extern void csr_writew(uint16_t value, unsigned long addr); +extern uint16_t csr_readw(unsigned long addr); +extern void csr_writel(uint32_t value, unsigned long addr); +extern uint32_t csr_readl(unsigned long addr); +#else /* ! CSR_ACCESSORS_DEFINED */ +#include <hw/common.h> +#endif /* ! CSR_ACCESSORS_DEFINED */ + +/* ctrl */ +#define CSR_CTRL_BASE 0xe0000000L +#define CSR_CTRL_RESET_ADDR 0xe0000000L +#define CSR_CTRL_RESET_SIZE 1 +static inline unsigned char ctrl_reset_read(void) { + unsigned char r = csr_readl(0xe0000000L); + return r; +} +static inline void ctrl_reset_write(unsigned char value) { + csr_writel(value, 0xe0000000L); +} +#define CSR_CTRL_SCRATCH_ADDR 0xe0000004L +#define CSR_CTRL_SCRATCH_SIZE 4 +static inline unsigned int ctrl_scratch_read(void) { + unsigned int r = csr_readl(0xe0000004L); + r <<= 8; + r |= csr_readl(0xe0000008L); + r <<= 8; + r |= csr_readl(0xe000000cL); + r <<= 8; + r |= csr_readl(0xe0000010L); + return r; +} +static inline void ctrl_scratch_write(unsigned int value) { + csr_writel(value >> 24, 0xe0000004L); + csr_writel(value >> 16, 0xe0000008L); + csr_writel(value >> 8, 0xe000000cL); + csr_writel(value, 0xe0000010L); +} +#define CSR_CTRL_BUS_ERRORS_ADDR 0xe0000014L +#define CSR_CTRL_BUS_ERRORS_SIZE 4 +static inline unsigned int ctrl_bus_errors_read(void) { + unsigned int r = csr_readl(0xe0000014L); + r <<= 8; + r |= csr_readl(0xe0000018L); + r <<= 8; + r |= csr_readl(0xe000001cL); + r <<= 8; + r |= csr_readl(0xe0000020L); + return r; +} + +/* messible */ +#define CSR_MESSIBLE_BASE 0xe0008000L +#define CSR_MESSIBLE_IN_ADDR 0xe0008000L +#define CSR_MESSIBLE_IN_SIZE 1 +static inline unsigned char messible_in_read(void) { + unsigned char r = csr_readl(0xe0008000L); + return r; +} +static inline void messible_in_write(unsigned char value) { + csr_writel(value, 0xe0008000L); +} +#define CSR_MESSIBLE_OUT_ADDR 0xe0008004L +#define CSR_MESSIBLE_OUT_SIZE 1 +static inline unsigned char messible_out_read(void) { + unsigned char r = csr_readl(0xe0008004L); + return r; +} +#define CSR_MESSIBLE_STATUS_ADDR 0xe0008008L +#define CSR_MESSIBLE_STATUS_SIZE 1 +static inline unsigned char messible_status_read(void) { + unsigned char r = csr_readl(0xe0008008L); + return r; +} +#define CSR_MESSIBLE_STATUS_FULL_OFFSET 0 +#define CSR_MESSIBLE_STATUS_FULL_SIZE 1 +#define CSR_MESSIBLE_STATUS_HAVE_OFFSET 1 +#define CSR_MESSIBLE_STATUS_HAVE_SIZE 1 + +/* picorvspi */ +#define CSR_PICORVSPI_BASE 0xe0005000L +#define CSR_PICORVSPI_CFG1_ADDR 0xe0005000L +#define CSR_PICORVSPI_CFG1_SIZE 1 +static inline unsigned char picorvspi_cfg1_read(void) { + unsigned char r = csr_readl(0xe0005000L); + return r; +} +static inline void picorvspi_cfg1_write(unsigned char value) { + csr_writel(value, 0xe0005000L); +} +#define CSR_PICORVSPI_CFG1_BB_OUT_OFFSET 0 +#define CSR_PICORVSPI_CFG1_BB_OUT_SIZE 4 +#define CSR_PICORVSPI_CFG1_BB_CLK_OFFSET 4 +#define CSR_PICORVSPI_CFG1_BB_CLK_SIZE 1 +#define CSR_PICORVSPI_CFG1_BB_CS_OFFSET 5 +#define CSR_PICORVSPI_CFG1_BB_CS_SIZE 1 +#define CSR_PICORVSPI_CFG2_ADDR 0xe0005004L +#define CSR_PICORVSPI_CFG2_SIZE 1 +static inline unsigned char picorvspi_cfg2_read(void) { + unsigned char r = csr_readl(0xe0005004L); + return r; +} +static inline void picorvspi_cfg2_write(unsigned char value) { + csr_writel(value, 0xe0005004L); +} +#define CSR_PICORVSPI_CFG2_BB_OE_OFFSET 0 +#define CSR_PICORVSPI_CFG2_BB_OE_SIZE 4 +#define CSR_PICORVSPI_CFG3_ADDR 0xe0005008L +#define CSR_PICORVSPI_CFG3_SIZE 1 +static inline unsigned char picorvspi_cfg3_read(void) { + unsigned char r = csr_readl(0xe0005008L); + return r; +} +static inline void picorvspi_cfg3_write(unsigned char value) { + csr_writel(value, 0xe0005008L); +} +#define CSR_PICORVSPI_CFG3_RLAT_OFFSET 0 +#define CSR_PICORVSPI_CFG3_RLAT_SIZE 4 +#define CSR_PICORVSPI_CFG3_CRM_OFFSET 4 +#define CSR_PICORVSPI_CFG3_CRM_SIZE 1 +#define CSR_PICORVSPI_CFG3_QSPI_OFFSET 5 +#define CSR_PICORVSPI_CFG3_QSPI_SIZE 1 +#define CSR_PICORVSPI_CFG3_DDR_OFFSET 6 +#define CSR_PICORVSPI_CFG3_DDR_SIZE 1 +#define CSR_PICORVSPI_CFG4_ADDR 0xe000500cL +#define CSR_PICORVSPI_CFG4_SIZE 1 +static inline unsigned char picorvspi_cfg4_read(void) { + unsigned char r = csr_readl(0xe000500cL); + return r; +} +static inline void picorvspi_cfg4_write(unsigned char value) { + csr_writel(value, 0xe000500cL); +} +#define CSR_PICORVSPI_CFG4_MEMIO_OFFSET 7 +#define CSR_PICORVSPI_CFG4_MEMIO_SIZE 1 +#define CSR_PICORVSPI_STAT1_ADDR 0xe0005010L +#define CSR_PICORVSPI_STAT1_SIZE 1 +static inline unsigned char picorvspi_stat1_read(void) { + unsigned char r = csr_readl(0xe0005010L); + return r; +} +#define CSR_PICORVSPI_STAT1_BB_IN_OFFSET 0 +#define CSR_PICORVSPI_STAT1_BB_IN_SIZE 4 +#define CSR_PICORVSPI_STAT2_ADDR 0xe0005014L +#define CSR_PICORVSPI_STAT2_SIZE 1 +static inline unsigned char picorvspi_stat2_read(void) { + unsigned char r = csr_readl(0xe0005014L); + return r; +} +#define CSR_PICORVSPI_STAT3_ADDR 0xe0005018L +#define CSR_PICORVSPI_STAT3_SIZE 1 +static inline unsigned char picorvspi_stat3_read(void) { + unsigned char r = csr_readl(0xe0005018L); + return r; +} +#define CSR_PICORVSPI_STAT4_ADDR 0xe000501cL +#define CSR_PICORVSPI_STAT4_SIZE 1 +static inline unsigned char picorvspi_stat4_read(void) { + unsigned char r = csr_readl(0xe000501cL); + return r; +} + +/* reboot */ +#define CSR_REBOOT_BASE 0xe0006000L +#define CSR_REBOOT_CTRL_ADDR 0xe0006000L +#define CSR_REBOOT_CTRL_SIZE 1 +static inline unsigned char reboot_ctrl_read(void) { + unsigned char r = csr_readl(0xe0006000L); + return r; +} +static inline void reboot_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0006000L); +} +#define CSR_REBOOT_CTRL_IMAGE_OFFSET 0 +#define CSR_REBOOT_CTRL_IMAGE_SIZE 2 +#define CSR_REBOOT_CTRL_KEY_OFFSET 2 +#define CSR_REBOOT_CTRL_KEY_SIZE 6 +#define CSR_REBOOT_ADDR_ADDR 0xe0006004L +#define CSR_REBOOT_ADDR_SIZE 4 +static inline unsigned int reboot_addr_read(void) { + unsigned int r = csr_readl(0xe0006004L); + r <<= 8; + r |= csr_readl(0xe0006008L); + r <<= 8; + r |= csr_readl(0xe000600cL); + r <<= 8; + r |= csr_readl(0xe0006010L); + return r; +} +static inline void reboot_addr_write(unsigned int value) { + csr_writel(value >> 24, 0xe0006004L); + csr_writel(value >> 16, 0xe0006008L); + csr_writel(value >> 8, 0xe000600cL); + csr_writel(value, 0xe0006010L); +} + +/* rgb */ +#define CSR_RGB_BASE 0xe0006800L +#define CSR_RGB_DAT_ADDR 0xe0006800L +#define CSR_RGB_DAT_SIZE 1 +static inline unsigned char rgb_dat_read(void) { + unsigned char r = csr_readl(0xe0006800L); + return r; +} +static inline void rgb_dat_write(unsigned char value) { + csr_writel(value, 0xe0006800L); +} +#define CSR_RGB_ADDR_ADDR 0xe0006804L +#define CSR_RGB_ADDR_SIZE 1 +static inline unsigned char rgb_addr_read(void) { + unsigned char r = csr_readl(0xe0006804L); + return r; +} +static inline void rgb_addr_write(unsigned char value) { + csr_writel(value, 0xe0006804L); +} +#define CSR_RGB_CTRL_ADDR 0xe0006808L +#define CSR_RGB_CTRL_SIZE 1 +static inline unsigned char rgb_ctrl_read(void) { + unsigned char r = csr_readl(0xe0006808L); + return r; +} +static inline void rgb_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0006808L); +} +#define CSR_RGB_CTRL_EXE_OFFSET 0 +#define CSR_RGB_CTRL_EXE_SIZE 1 +#define CSR_RGB_CTRL_CURREN_OFFSET 1 +#define CSR_RGB_CTRL_CURREN_SIZE 1 +#define CSR_RGB_CTRL_RGBLEDEN_OFFSET 2 +#define CSR_RGB_CTRL_RGBLEDEN_SIZE 1 +#define CSR_RGB_CTRL_RRAW_OFFSET 3 +#define CSR_RGB_CTRL_RRAW_SIZE 1 +#define CSR_RGB_CTRL_GRAW_OFFSET 4 +#define CSR_RGB_CTRL_GRAW_SIZE 1 +#define CSR_RGB_CTRL_BRAW_OFFSET 5 +#define CSR_RGB_CTRL_BRAW_SIZE 1 +#define CSR_RGB_RAW_ADDR 0xe000680cL +#define CSR_RGB_RAW_SIZE 1 +static inline unsigned char rgb_raw_read(void) { + unsigned char r = csr_readl(0xe000680cL); + return r; +} +static inline void rgb_raw_write(unsigned char value) { + csr_writel(value, 0xe000680cL); +} +#define CSR_RGB_RAW_R_OFFSET 0 +#define CSR_RGB_RAW_R_SIZE 1 +#define CSR_RGB_RAW_G_OFFSET 1 +#define CSR_RGB_RAW_G_SIZE 1 +#define CSR_RGB_RAW_B_OFFSET 2 +#define CSR_RGB_RAW_B_SIZE 1 + +/* timer0 */ +#define CSR_TIMER0_BASE 0xe0002800L +#define CSR_TIMER0_LOAD_ADDR 0xe0002800L +#define CSR_TIMER0_LOAD_SIZE 4 +static inline unsigned int timer0_load_read(void) { + unsigned int r = csr_readl(0xe0002800L); + r <<= 8; + r |= csr_readl(0xe0002804L); + r <<= 8; + r |= csr_readl(0xe0002808L); + r <<= 8; + r |= csr_readl(0xe000280cL); + return r; +} +static inline void timer0_load_write(unsigned int value) { + csr_writel(value >> 24, 0xe0002800L); + csr_writel(value >> 16, 0xe0002804L); + csr_writel(value >> 8, 0xe0002808L); + csr_writel(value, 0xe000280cL); +} +#define CSR_TIMER0_RELOAD_ADDR 0xe0002810L +#define CSR_TIMER0_RELOAD_SIZE 4 +static inline unsigned int timer0_reload_read(void) { + unsigned int r = csr_readl(0xe0002810L); + r <<= 8; + r |= csr_readl(0xe0002814L); + r <<= 8; + r |= csr_readl(0xe0002818L); + r <<= 8; + r |= csr_readl(0xe000281cL); + return r; +} +static inline void timer0_reload_write(unsigned int value) { + csr_writel(value >> 24, 0xe0002810L); + csr_writel(value >> 16, 0xe0002814L); + csr_writel(value >> 8, 0xe0002818L); + csr_writel(value, 0xe000281cL); +} +#define CSR_TIMER0_EN_ADDR 0xe0002820L +#define CSR_TIMER0_EN_SIZE 1 +static inline unsigned char timer0_en_read(void) { + unsigned char r = csr_readl(0xe0002820L); + return r; +} +static inline void timer0_en_write(unsigned char value) { + csr_writel(value, 0xe0002820L); +} +#define CSR_TIMER0_UPDATE_VALUE_ADDR 0xe0002824L +#define CSR_TIMER0_UPDATE_VALUE_SIZE 1 +static inline unsigned char timer0_update_value_read(void) { + unsigned char r = csr_readl(0xe0002824L); + return r; +} +static inline void timer0_update_value_write(unsigned char value) { + csr_writel(value, 0xe0002824L); +} +#define CSR_TIMER0_VALUE_ADDR 0xe0002828L +#define CSR_TIMER0_VALUE_SIZE 4 +static inline unsigned int timer0_value_read(void) { + unsigned int r = csr_readl(0xe0002828L); + r <<= 8; + r |= csr_readl(0xe000282cL); + r <<= 8; + r |= csr_readl(0xe0002830L); + r <<= 8; + r |= csr_readl(0xe0002834L); + return r; +} +#define CSR_TIMER0_EV_STATUS_ADDR 0xe0002838L +#define CSR_TIMER0_EV_STATUS_SIZE 1 +static inline unsigned char timer0_ev_status_read(void) { + unsigned char r = csr_readl(0xe0002838L); + return r; +} +static inline void timer0_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0002838L); +} +#define CSR_TIMER0_EV_PENDING_ADDR 0xe000283cL +#define CSR_TIMER0_EV_PENDING_SIZE 1 +static inline unsigned char timer0_ev_pending_read(void) { + unsigned char r = csr_readl(0xe000283cL); + return r; +} +static inline void timer0_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe000283cL); +} +#define CSR_TIMER0_EV_ENABLE_ADDR 0xe0002840L +#define CSR_TIMER0_EV_ENABLE_SIZE 1 +static inline unsigned char timer0_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0002840L); + return r; +} +static inline void timer0_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0002840L); +} + +/* touch */ +#define CSR_TOUCH_BASE 0xe0005800L +#define CSR_TOUCH_O_ADDR 0xe0005800L +#define CSR_TOUCH_O_SIZE 1 +static inline unsigned char touch_o_read(void) { + unsigned char r = csr_readl(0xe0005800L); + return r; +} +static inline void touch_o_write(unsigned char value) { + csr_writel(value, 0xe0005800L); +} +#define CSR_TOUCH_O_O_OFFSET 0 +#define CSR_TOUCH_O_O_SIZE 4 +#define CSR_TOUCH_OE_ADDR 0xe0005804L +#define CSR_TOUCH_OE_SIZE 1 +static inline unsigned char touch_oe_read(void) { + unsigned char r = csr_readl(0xe0005804L); + return r; +} +static inline void touch_oe_write(unsigned char value) { + csr_writel(value, 0xe0005804L); +} +#define CSR_TOUCH_OE_OE_OFFSET 0 +#define CSR_TOUCH_OE_OE_SIZE 4 +#define CSR_TOUCH_I_ADDR 0xe0005808L +#define CSR_TOUCH_I_SIZE 1 +static inline unsigned char touch_i_read(void) { + unsigned char r = csr_readl(0xe0005808L); + return r; +} +#define CSR_TOUCH_I_I_OFFSET 0 +#define CSR_TOUCH_I_I_SIZE 4 + +/* usb */ +#define CSR_USB_BASE 0xe0004800L +#define CSR_USB_PULLUP_OUT_ADDR 0xe0004800L +#define CSR_USB_PULLUP_OUT_SIZE 1 +static inline unsigned char usb_pullup_out_read(void) { + unsigned char r = csr_readl(0xe0004800L); + return r; +} +static inline void usb_pullup_out_write(unsigned char value) { + csr_writel(value, 0xe0004800L); +} +#define CSR_USB_ADDRESS_ADDR 0xe0004804L +#define CSR_USB_ADDRESS_SIZE 1 +static inline unsigned char usb_address_read(void) { + unsigned char r = csr_readl(0xe0004804L); + return r; +} +static inline void usb_address_write(unsigned char value) { + csr_writel(value, 0xe0004804L); +} +#define CSR_USB_ADDRESS_ADDR_OFFSET 0 +#define CSR_USB_ADDRESS_ADDR_SIZE 7 +#define CSR_USB_NEXT_EV_ADDR 0xe0004808L +#define CSR_USB_NEXT_EV_SIZE 1 +static inline unsigned char usb_next_ev_read(void) { + unsigned char r = csr_readl(0xe0004808L); + return r; +} +#define CSR_USB_NEXT_EV_IN_OFFSET 0 +#define CSR_USB_NEXT_EV_IN_SIZE 1 +#define CSR_USB_NEXT_EV_OUT_OFFSET 1 +#define CSR_USB_NEXT_EV_OUT_SIZE 1 +#define CSR_USB_NEXT_EV_SETUP_OFFSET 2 +#define CSR_USB_NEXT_EV_SETUP_SIZE 1 +#define CSR_USB_NEXT_EV_RESET_OFFSET 3 +#define CSR_USB_NEXT_EV_RESET_SIZE 1 +#define CSR_USB_SETUP_DATA_ADDR 0xe000480cL +#define CSR_USB_SETUP_DATA_SIZE 1 +static inline unsigned char usb_setup_data_read(void) { + unsigned char r = csr_readl(0xe000480cL); + return r; +} +#define CSR_USB_SETUP_DATA_DATA_OFFSET 0 +#define CSR_USB_SETUP_DATA_DATA_SIZE 8 +#define CSR_USB_SETUP_CTRL_ADDR 0xe0004810L +#define CSR_USB_SETUP_CTRL_SIZE 1 +static inline unsigned char usb_setup_ctrl_read(void) { + unsigned char r = csr_readl(0xe0004810L); + return r; +} +static inline void usb_setup_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0004810L); +} +#define CSR_USB_SETUP_CTRL_RESET_OFFSET 5 +#define CSR_USB_SETUP_CTRL_RESET_SIZE 1 +#define CSR_USB_SETUP_STATUS_ADDR 0xe0004814L +#define CSR_USB_SETUP_STATUS_SIZE 1 +static inline unsigned char usb_setup_status_read(void) { + unsigned char r = csr_readl(0xe0004814L); + return r; +} +#define CSR_USB_SETUP_STATUS_EPNO_OFFSET 0 +#define CSR_USB_SETUP_STATUS_EPNO_SIZE 4 +#define CSR_USB_SETUP_STATUS_HAVE_OFFSET 4 +#define CSR_USB_SETUP_STATUS_HAVE_SIZE 1 +#define CSR_USB_SETUP_STATUS_PEND_OFFSET 5 +#define CSR_USB_SETUP_STATUS_PEND_SIZE 1 +#define CSR_USB_SETUP_STATUS_IS_IN_OFFSET 6 +#define CSR_USB_SETUP_STATUS_IS_IN_SIZE 1 +#define CSR_USB_SETUP_STATUS_DATA_OFFSET 7 +#define CSR_USB_SETUP_STATUS_DATA_SIZE 1 +#define CSR_USB_SETUP_EV_STATUS_ADDR 0xe0004818L +#define CSR_USB_SETUP_EV_STATUS_SIZE 1 +static inline unsigned char usb_setup_ev_status_read(void) { + unsigned char r = csr_readl(0xe0004818L); + return r; +} +static inline void usb_setup_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0004818L); +} +#define CSR_USB_SETUP_EV_PENDING_ADDR 0xe000481cL +#define CSR_USB_SETUP_EV_PENDING_SIZE 1 +static inline unsigned char usb_setup_ev_pending_read(void) { + unsigned char r = csr_readl(0xe000481cL); + return r; +} +static inline void usb_setup_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe000481cL); +} +#define CSR_USB_SETUP_EV_ENABLE_ADDR 0xe0004820L +#define CSR_USB_SETUP_EV_ENABLE_SIZE 1 +static inline unsigned char usb_setup_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0004820L); + return r; +} +static inline void usb_setup_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0004820L); +} +#define CSR_USB_IN_DATA_ADDR 0xe0004824L +#define CSR_USB_IN_DATA_SIZE 1 +static inline unsigned char usb_in_data_read(void) { + unsigned char r = csr_readl(0xe0004824L); + return r; +} +static inline void usb_in_data_write(unsigned char value) { + csr_writel(value, 0xe0004824L); +} +#define CSR_USB_IN_DATA_DATA_OFFSET 0 +#define CSR_USB_IN_DATA_DATA_SIZE 8 +#define CSR_USB_IN_CTRL_ADDR 0xe0004828L +#define CSR_USB_IN_CTRL_SIZE 1 +static inline unsigned char usb_in_ctrl_read(void) { + unsigned char r = csr_readl(0xe0004828L); + return r; +} +static inline void usb_in_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0004828L); +} +#define CSR_USB_IN_CTRL_EPNO_OFFSET 0 +#define CSR_USB_IN_CTRL_EPNO_SIZE 4 +#define CSR_USB_IN_CTRL_RESET_OFFSET 5 +#define CSR_USB_IN_CTRL_RESET_SIZE 1 +#define CSR_USB_IN_CTRL_STALL_OFFSET 6 +#define CSR_USB_IN_CTRL_STALL_SIZE 1 +#define CSR_USB_IN_STATUS_ADDR 0xe000482cL +#define CSR_USB_IN_STATUS_SIZE 1 +static inline unsigned char usb_in_status_read(void) { + unsigned char r = csr_readl(0xe000482cL); + return r; +} +#define CSR_USB_IN_STATUS_IDLE_OFFSET 0 +#define CSR_USB_IN_STATUS_IDLE_SIZE 1 +#define CSR_USB_IN_STATUS_HAVE_OFFSET 4 +#define CSR_USB_IN_STATUS_HAVE_SIZE 1 +#define CSR_USB_IN_STATUS_PEND_OFFSET 5 +#define CSR_USB_IN_STATUS_PEND_SIZE 1 +#define CSR_USB_IN_EV_STATUS_ADDR 0xe0004830L +#define CSR_USB_IN_EV_STATUS_SIZE 1 +static inline unsigned char usb_in_ev_status_read(void) { + unsigned char r = csr_readl(0xe0004830L); + return r; +} +static inline void usb_in_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0004830L); +} +#define CSR_USB_IN_EV_PENDING_ADDR 0xe0004834L +#define CSR_USB_IN_EV_PENDING_SIZE 1 +static inline unsigned char usb_in_ev_pending_read(void) { + unsigned char r = csr_readl(0xe0004834L); + return r; +} +static inline void usb_in_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe0004834L); +} +#define CSR_USB_IN_EV_ENABLE_ADDR 0xe0004838L +#define CSR_USB_IN_EV_ENABLE_SIZE 1 +static inline unsigned char usb_in_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0004838L); + return r; +} +static inline void usb_in_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0004838L); +} +#define CSR_USB_OUT_DATA_ADDR 0xe000483cL +#define CSR_USB_OUT_DATA_SIZE 1 +static inline unsigned char usb_out_data_read(void) { + unsigned char r = csr_readl(0xe000483cL); + return r; +} +#define CSR_USB_OUT_DATA_DATA_OFFSET 0 +#define CSR_USB_OUT_DATA_DATA_SIZE 8 +#define CSR_USB_OUT_CTRL_ADDR 0xe0004840L +#define CSR_USB_OUT_CTRL_SIZE 1 +static inline unsigned char usb_out_ctrl_read(void) { + unsigned char r = csr_readl(0xe0004840L); + return r; +} +static inline void usb_out_ctrl_write(unsigned char value) { + csr_writel(value, 0xe0004840L); +} +#define CSR_USB_OUT_CTRL_EPNO_OFFSET 0 +#define CSR_USB_OUT_CTRL_EPNO_SIZE 4 +#define CSR_USB_OUT_CTRL_ENABLE_OFFSET 4 +#define CSR_USB_OUT_CTRL_ENABLE_SIZE 1 +#define CSR_USB_OUT_CTRL_RESET_OFFSET 5 +#define CSR_USB_OUT_CTRL_RESET_SIZE 1 +#define CSR_USB_OUT_CTRL_STALL_OFFSET 6 +#define CSR_USB_OUT_CTRL_STALL_SIZE 1 +#define CSR_USB_OUT_STATUS_ADDR 0xe0004844L +#define CSR_USB_OUT_STATUS_SIZE 1 +static inline unsigned char usb_out_status_read(void) { + unsigned char r = csr_readl(0xe0004844L); + return r; +} +#define CSR_USB_OUT_STATUS_EPNO_OFFSET 0 +#define CSR_USB_OUT_STATUS_EPNO_SIZE 4 +#define CSR_USB_OUT_STATUS_HAVE_OFFSET 4 +#define CSR_USB_OUT_STATUS_HAVE_SIZE 1 +#define CSR_USB_OUT_STATUS_PEND_OFFSET 5 +#define CSR_USB_OUT_STATUS_PEND_SIZE 1 +#define CSR_USB_OUT_EV_STATUS_ADDR 0xe0004848L +#define CSR_USB_OUT_EV_STATUS_SIZE 1 +static inline unsigned char usb_out_ev_status_read(void) { + unsigned char r = csr_readl(0xe0004848L); + return r; +} +static inline void usb_out_ev_status_write(unsigned char value) { + csr_writel(value, 0xe0004848L); +} +#define CSR_USB_OUT_EV_PENDING_ADDR 0xe000484cL +#define CSR_USB_OUT_EV_PENDING_SIZE 1 +static inline unsigned char usb_out_ev_pending_read(void) { + unsigned char r = csr_readl(0xe000484cL); + return r; +} +static inline void usb_out_ev_pending_write(unsigned char value) { + csr_writel(value, 0xe000484cL); +} +#define CSR_USB_OUT_EV_ENABLE_ADDR 0xe0004850L +#define CSR_USB_OUT_EV_ENABLE_SIZE 1 +static inline unsigned char usb_out_ev_enable_read(void) { + unsigned char r = csr_readl(0xe0004850L); + return r; +} +static inline void usb_out_ev_enable_write(unsigned char value) { + csr_writel(value, 0xe0004850L); +} +#define CSR_USB_OUT_ENABLE_STATUS_ADDR 0xe0004854L +#define CSR_USB_OUT_ENABLE_STATUS_SIZE 1 +static inline unsigned char usb_out_enable_status_read(void) { + unsigned char r = csr_readl(0xe0004854L); + return r; +} +#define CSR_USB_OUT_STALL_STATUS_ADDR 0xe0004858L +#define CSR_USB_OUT_STALL_STATUS_SIZE 1 +static inline unsigned char usb_out_stall_status_read(void) { + unsigned char r = csr_readl(0xe0004858L); + return r; +} + +/* version */ +#define CSR_VERSION_BASE 0xe0007000L +#define CSR_VERSION_MAJOR_ADDR 0xe0007000L +#define CSR_VERSION_MAJOR_SIZE 1 +static inline unsigned char version_major_read(void) { + unsigned char r = csr_readl(0xe0007000L); + return r; +} +#define CSR_VERSION_MINOR_ADDR 0xe0007004L +#define CSR_VERSION_MINOR_SIZE 1 +static inline unsigned char version_minor_read(void) { + unsigned char r = csr_readl(0xe0007004L); + return r; +} +#define CSR_VERSION_REVISION_ADDR 0xe0007008L +#define CSR_VERSION_REVISION_SIZE 1 +static inline unsigned char version_revision_read(void) { + unsigned char r = csr_readl(0xe0007008L); + return r; +} +#define CSR_VERSION_GITREV_ADDR 0xe000700cL +#define CSR_VERSION_GITREV_SIZE 4 +static inline unsigned int version_gitrev_read(void) { + unsigned int r = csr_readl(0xe000700cL); + r <<= 8; + r |= csr_readl(0xe0007010L); + r <<= 8; + r |= csr_readl(0xe0007014L); + r <<= 8; + r |= csr_readl(0xe0007018L); + return r; +} +#define CSR_VERSION_GITEXTRA_ADDR 0xe000701cL +#define CSR_VERSION_GITEXTRA_SIZE 2 +static inline unsigned short int version_gitextra_read(void) { + unsigned short int r = csr_readl(0xe000701cL); + r <<= 8; + r |= csr_readl(0xe0007020L); + return r; +} +#define CSR_VERSION_DIRTY_ADDR 0xe0007024L +#define CSR_VERSION_DIRTY_SIZE 1 +static inline unsigned char version_dirty_read(void) { + unsigned char r = csr_readl(0xe0007024L); + return r; +} +#define CSR_VERSION_DIRTY_DIRTY_OFFSET 0 +#define CSR_VERSION_DIRTY_DIRTY_SIZE 1 +#define CSR_VERSION_MODEL_ADDR 0xe0007028L +#define CSR_VERSION_MODEL_SIZE 1 +static inline unsigned char version_model_read(void) { + unsigned char r = csr_readl(0xe0007028L); + return r; +} +#define CSR_VERSION_MODEL_MODEL_OFFSET 0 +#define CSR_VERSION_MODEL_MODEL_SIZE 8 +#define CSR_VERSION_SEED_ADDR 0xe000702cL +#define CSR_VERSION_SEED_SIZE 4 +static inline unsigned int version_seed_read(void) { + unsigned int r = csr_readl(0xe000702cL); + r <<= 8; + r |= csr_readl(0xe0007030L); + r <<= 8; + r |= csr_readl(0xe0007034L); + r <<= 8; + r |= csr_readl(0xe0007038L); + return r; +} + +/* constants */ +#define TIMER0_INTERRUPT 2 +static inline int timer0_interrupt_read(void) { + return 2; +} +#define USB_INTERRUPT 3 +static inline int usb_interrupt_read(void) { + return 3; +} +#define CONFIG_BITSTREAM_SYNC_HEADER1 2123999870 +static inline int config_bitstream_sync_header1_read(void) { + return 2123999870; +} +#define CONFIG_BITSTREAM_SYNC_HEADER2 2125109630 +static inline int config_bitstream_sync_header2_read(void) { + return 2125109630; +} +#define CONFIG_CLOCK_FREQUENCY 12000000 +static inline int config_clock_frequency_read(void) { + return 12000000; +} +#define CONFIG_CPU_RESET_ADDR 0 +static inline int config_cpu_reset_addr_read(void) { + return 0; +} +#define CONFIG_CPU_TYPE "VEXRISCV" +static inline const char * config_cpu_type_read(void) { + return "VEXRISCV"; +} +#define CONFIG_CPU_TYPE_VEXRISCV 1 +static inline int config_cpu_type_vexriscv_read(void) { + return 1; +} +#define CONFIG_CPU_VARIANT "MIN" +static inline const char * config_cpu_variant_read(void) { + return "MIN"; +} +#define CONFIG_CPU_VARIANT_MIN 1 +static inline int config_cpu_variant_min_read(void) { + return 1; +} +#define CONFIG_CSR_ALIGNMENT 32 +static inline int config_csr_alignment_read(void) { + return 32; +} +#define CONFIG_CSR_DATA_WIDTH 8 +static inline int config_csr_data_width_read(void) { + return 8; +} + +#endif diff --git a/hw/bsp/fomu/include/hw/common.h b/hw/bsp/fomu/include/hw/common.h new file mode 100644 index 000000000..6a97ca2e9 --- /dev/null +++ b/hw/bsp/fomu/include/hw/common.h @@ -0,0 +1,33 @@ +#ifndef _HW_COMMON_H_ +#define _HW_COMMON_H_ +#include <stdint.h> +static inline void csr_writeb(uint8_t value, uint32_t addr) +{ + *((volatile uint8_t *)addr) = value; +} + +static inline uint8_t csr_readb(uint32_t addr) +{ + return *(volatile uint8_t *)addr; +} + +static inline void csr_writew(uint16_t value, uint32_t addr) +{ + *((volatile uint16_t *)addr) = value; +} + +static inline uint16_t csr_readw(uint32_t addr) +{ + return *(volatile uint16_t *)addr; +} + +static inline void csr_writel(uint32_t value, uint32_t addr) +{ + *((volatile uint32_t *)addr) = value; +} + +static inline uint32_t csr_readl(uint32_t addr) +{ + return *(volatile uint32_t *)addr; +} +#endif /* _HW_COMMON_H_ */
\ No newline at end of file diff --git a/hw/bsp/fomu/include/irq.h b/hw/bsp/fomu/include/irq.h new file mode 100644 index 000000000..a82218907 --- /dev/null +++ b/hw/bsp/fomu/include/irq.h @@ -0,0 +1,71 @@ +#ifndef __IRQ_H +#define __IRQ_H + +#ifdef __cplusplus +extern "C" { +#endif + + +#define CSR_MSTATUS_MIE 0x8 + +#define CSR_IRQ_MASK 0xBC0 +#define CSR_IRQ_PENDING 0xFC0 + +#define CSR_DCACHE_INFO 0xCC0 + +#define csrr(reg) ({ unsigned long __tmp; \ + asm volatile ("csrr %0, " #reg : "=r"(__tmp)); \ + __tmp; }) + +#define csrw(reg, val) ({ \ + if (__builtin_constant_p(val) && (unsigned long)(val) < 32) \ + asm volatile ("csrw " #reg ", %0" :: "i"(val)); \ + else \ + asm volatile ("csrw " #reg ", %0" :: "r"(val)); }) + +#define csrs(reg, bit) ({ \ + if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ + asm volatile ("csrrs x0, " #reg ", %0" :: "i"(bit)); \ + else \ + asm volatile ("csrrs x0, " #reg ", %0" :: "r"(bit)); }) + +#define csrc(reg, bit) ({ \ + if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ + asm volatile ("csrrc x0, " #reg ", %0" :: "i"(bit)); \ + else \ + asm volatile ("csrrc x0, " #reg ", %0" :: "r"(bit)); }) + +static inline unsigned int irq_getie(void) +{ + return (csrr(mstatus) & CSR_MSTATUS_MIE) != 0; +} + +static inline void irq_setie(unsigned int ie) +{ + if(ie) csrs(mstatus,CSR_MSTATUS_MIE); else csrc(mstatus,CSR_MSTATUS_MIE); +} + +static inline unsigned int irq_getmask(void) +{ + unsigned int mask; + asm volatile ("csrr %0, %1" : "=r"(mask) : "i"(CSR_IRQ_MASK)); + return mask; +} + +static inline void irq_setmask(unsigned int mask) +{ + asm volatile ("csrw %0, %1" :: "i"(CSR_IRQ_MASK), "r"(mask)); +} + +static inline unsigned int irq_pending(void) +{ + unsigned int pending; + asm volatile ("csrr %0, %1" : "=r"(pending) : "i"(CSR_IRQ_PENDING)); + return pending; +} + +#ifdef __cplusplus +} +#endif + +#endif /* __IRQ_H */
\ No newline at end of file diff --git a/hw/bsp/fomu/output_format.ld b/hw/bsp/fomu/output_format.ld new file mode 100644 index 000000000..5e76f5f4e --- /dev/null +++ b/hw/bsp/fomu/output_format.ld @@ -0,0 +1 @@ +OUTPUT_FORMAT("elf32-littleriscv") diff --git a/hw/bsp/fomu/regions.ld b/hw/bsp/fomu/regions.ld new file mode 100644 index 000000000..51811f66e --- /dev/null +++ b/hw/bsp/fomu/regions.ld @@ -0,0 +1,6 @@ +MEMORY { + csr : ORIGIN = 0x60000000, LENGTH = 0x01000000 + vexriscv_debug : ORIGIN = 0xf00f0000, LENGTH = 0x00000100 + sram : ORIGIN = 0x10000000, LENGTH = 0x00020000 + rom : ORIGIN = 0x00000000, LENGTH = 0x00002000 +} diff --git a/hw/bsp/lpcxpresso11u37/board.mk b/hw/bsp/lpcxpresso11u37/board.mk index ced7ceefd..d3121ab95 100644 --- a/hw/bsp/lpcxpresso11u37/board.mk +++ b/hw/bsp/lpcxpresso11u37/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m0 \ @@ -13,7 +14,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=nested-externs -Wno-error=strict-prototypes -Wno-error=unused-parameter -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc11uxx/lpc_chip_11uxx +MCU_DIR = hw/mcu/nxp/lpcopen/lpc11uxx/lpc_chip_11uxx # All source paths should be relative to the top level. LD_FILE = hw/bsp/lpcxpresso11u37/lpc11u37.ld diff --git a/hw/bsp/lpcxpresso11u68/board.mk b/hw/bsp/lpcxpresso11u68/board.mk index 9396a599a..ba84b7d95 100644 --- a/hw/bsp/lpcxpresso11u68/board.mk +++ b/hw/bsp/lpcxpresso11u68/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m0plus \ @@ -10,7 +11,7 @@ CFLAGS += \ -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM3")))' \ -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc11u6x/lpc_chip_11u6x +MCU_DIR = hw/mcu/nxp/lpcopen/lpc11u6x/lpc_chip_11u6x # All source paths should be relative to the top level. LD_FILE = hw/bsp/lpcxpresso11u68/lpc11u68.ld diff --git a/hw/bsp/lpcxpresso1347/board.mk b/hw/bsp/lpcxpresso1347/board.mk index 0f9be1b56..54a83a3b6 100644 --- a/hw/bsp/lpcxpresso1347/board.mk +++ b/hw/bsp/lpcxpresso1347/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m3 \ @@ -13,7 +14,7 @@ CFLAGS += \ # startup.c and lpc_types.h cause following errors CFLAGS += -Wno-error=nested-externs -Wno-error=strict-prototypes -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc13xx/lpc_chip_13xx +MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx # All source paths should be relative to the top level. LD_FILE = hw/bsp/lpcxpresso1347/lpc1347.ld diff --git a/hw/bsp/lpcxpresso1549/board.mk b/hw/bsp/lpcxpresso1549/board.mk index 929c63a8d..18325c5f7 100644 --- a/hw/bsp/lpcxpresso1549/board.mk +++ b/hw/bsp/lpcxpresso1549/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m3 \ @@ -12,7 +13,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=unused-variable -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc15xx/lpc_chip_15xx +MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/lpc1549.ld diff --git a/hw/bsp/lpcxpresso1769/board.mk b/hw/bsp/lpcxpresso1769/board.mk index 8bbc89138..b87d6afc9 100644 --- a/hw/bsp/lpcxpresso1769/board.mk +++ b/hw/bsp/lpcxpresso1769/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m3 \ @@ -11,14 +12,11 @@ CFLAGS += \ # lpc_types.h cause following errors CFLAGS += -Wno-error=strict-prototypes -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc175x_6x/lpc_chip_175x_6x +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x # All source paths should be relative to the top level. LD_FILE = hw/bsp/lpcxpresso1769/lpc1769.ld -# TODO remove later -SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c - SRC_C += \ $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c index e2d5f6cf2..76755e89f 100644 --- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c @@ -144,6 +144,20 @@ void board_init(void) } //--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +//--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ diff --git a/hw/bsp/lpcxpresso51u68/board.mk b/hw/bsp/lpcxpresso51u68/board.mk index e5576c3c0..61fbc0623 100644 --- a/hw/bsp/lpcxpresso51u68/board.mk +++ b/hw/bsp/lpcxpresso51u68/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m0plus \ @@ -10,7 +11,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=nested-externs -Wno-error=unused-parameter -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc51u6x/devices/LPC51U68 +MCU_DIR = hw/mcu/nxp/sdk/devices/LPC51U68 # All source paths should be relative to the top level. LD_FILE = $(MCU_DIR)/gcc/LPC51U68_flash.ld diff --git a/hw/bsp/lpcxpresso54114/board.mk b/hw/bsp/lpcxpresso54114/board.mk index 21c8dfd32..474a1ac5b 100644 --- a/hw/bsp/lpcxpresso54114/board.mk +++ b/hw/bsp/lpcxpresso54114/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ @@ -12,7 +13,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc54xxx/devices/LPC54114 +MCU_DIR = hw/mcu/nxp/sdk/devices/LPC54114 # All source paths should be relative to the top level. LD_FILE = $(MCU_DIR)/gcc/LPC54114J256_cm4_flash.ld diff --git a/hw/bsp/lpcxpresso55s69/board.mk b/hw/bsp/lpcxpresso55s69/board.mk index 6f1afaac1..5977ce9f4 100644 --- a/hw/bsp/lpcxpresso55s69/board.mk +++ b/hw/bsp/lpcxpresso55s69/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m33 \ @@ -12,7 +13,7 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=float-equal -Wno-error=nested-externs -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc55xx/devices/LPC55S69 +MCU_DIR = hw/mcu/nxp/sdk/devices/LPC55S69 # All source paths should be relative to the top level. LD_FILE = $(MCU_DIR)/gcc/LPC55S69_cm33_core0_flash.ld diff --git a/hw/bsp/mbed1768/board.mk b/hw/bsp/mbed1768/board.mk index 4e4cd1d8f..60428bcb4 100644 --- a/hw/bsp/mbed1768/board.mk +++ b/hw/bsp/mbed1768/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m3 \ @@ -11,14 +12,11 @@ CFLAGS += \ # startup.c and lpc_types.h cause following errors CFLAGS += -Wno-error=nested-externs -Wno-error=strict-prototypes -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc175x_6x/lpc_chip_175x_6x +MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x # All source paths should be relative to the top level. LD_FILE = hw/bsp/mbed1768/lpc1768.ld -# TODO remove later -SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c - SRC_C += \ $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ @@ -43,5 +41,7 @@ FREERTOS_PORT = ARM_CM3 JLINK_DEVICE = LPC1768 JLINK_IF = swd -# flash using jlink -flash: flash-jlink +# flash using pyocd +flash: $(BUILD)/$(BOARD)-firmware.hex + pyocd flash -t lpc1768 $< + diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c index 9f1ed12ef..66cf44a0e 100644 --- a/hw/bsp/mbed1768/mbed1768.c +++ b/hw/bsp/mbed1768/mbed1768.c @@ -136,6 +136,20 @@ void board_init(void) } //--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +//--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ diff --git a/hw/bsp/mcb1800/board.mk b/hw/bsp/mcb1800/board.mk index 3b8ee2968..b05d4d71a 100644 --- a/hw/bsp/mcb1800/board.mk +++ b/hw/bsp/mcb1800/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m3 \ @@ -10,14 +11,11 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc18xx/lpc_chip_18xx +MCU_DIR = hw/mcu/nxp/lpcopen/lpc18xx/lpc_chip_18xx # All source paths should be relative to the top level. LD_FILE = hw/bsp/mcb1800/lpc1857.ld -# TODO remove later -SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c - SRC_C += \ $(MCU_DIR)/../gcc/cr_startup_lpc18xx.c \ $(MCU_DIR)/src/chip_18xx_43xx.c \ @@ -32,7 +30,7 @@ INC += \ # For TinyUSB port source VENDOR = nxp -CHIP_FAMILY = lpc18_43 +CHIP_FAMILY = transdimension # For freeRTOS port source FREERTOS_PORT = ARM_CM3 diff --git a/hw/bsp/mcb1800/mcb1800.c b/hw/bsp/mcb1800/mcb1800.c index deb17f113..6d5284869 100644 --- a/hw/bsp/mcb1800/mcb1800.c +++ b/hw/bsp/mcb1800/mcb1800.c @@ -139,39 +139,63 @@ void board_init(void) #if CFG_TUSB_RHPORT0_MODE Chip_USB0_Init(); - // Reset controller - LPC_USB0->USBCMD_D |= 0x02; - while( LPC_USB0->USBCMD_D & 0x02 ) {} - - // Set mode - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); - #else // TODO OTG - LPC_USB0->USBMODE_D = USBMODE_DEVICE; - LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/; - #endif +// // Reset controller +// LPC_USB0->USBCMD_D |= 0x02; +// while( LPC_USB0->USBCMD_D & 0x02 ) {} +// +// // Set mode +// #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST +// LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); +// #else // TODO OTG +// LPC_USB0->USBMODE_D = USBMODE_DEVICE; +// LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/; +// #endif #endif // USB1 #if CFG_TUSB_RHPORT1_MODE Chip_USB1_Init(); - // Reset controller - LPC_USB1->USBCMD_D |= 0x02; - while( LPC_USB1->USBCMD_D & 0x02 ) {} +// // Reset controller +// LPC_USB1->USBCMD_D |= 0x02; +// while( LPC_USB1->USBCMD_D & 0x02 ) {} +// +// // Set mode +// #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST +// LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); +// #else // TODO OTG +// LPC_USB1->USBMODE_D = USBMODE_DEVICE; +// #endif +// +// // USB1 as fullspeed +// LPC_USB1->PORTSC1_D |= (1<<24); +#endif +} - // Set mode - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); - #else // TODO OTG - LPC_USB1->USBMODE_D = USBMODE_DEVICE; +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); #endif - // USB1 as fullspeed - LPC_USB1->PORTSC1_D |= (1<<24); -#endif + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif } +void USB1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_isr(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_isr(1); + #endif +} //--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ diff --git a/hw/bsp/metro_m0_express/board.mk b/hw/bsp/metro_m0_express/board.mk index 3ea672807..2039219a4 100644 --- a/hw/bsp/metro_m0_express/board.mk +++ b/hw/bsp/metro_m0_express/board.mk @@ -1,10 +1,11 @@ CFLAGS += \ - -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ - -D__SAMD21G18A__ \ + -flto \ -mthumb \ -mabi=aapcs-linux \ -mcpu=cortex-m0plus \ -nostdlib -nostartfiles \ + -D__SAMD21G18A__ \ + -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \ -DCFG_TUSB_MCU=OPT_MCU_SAMD21 # All source paths should be relative to the top level. diff --git a/hw/bsp/metro_m4_express/board.mk b/hw/bsp/metro_m4_express/board.mk index c62d9bc33..010e4b868 100644 --- a/hw/bsp/metro_m4_express/board.mk +++ b/hw/bsp/metro_m4_express/board.mk @@ -1,11 +1,12 @@ CFLAGS += \ - -D__SAMD51J19A__ \ + -flto \ -mthumb \ -mabi=aapcs-linux \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -D__SAMD51J19A__ \ -DCFG_TUSB_MCU=OPT_MCU_SAMD51 CFLAGS += -Wno-error=undef diff --git a/hw/bsp/mimxrt1010_evk/board.h b/hw/bsp/mimxrt1010_evk/board.h new file mode 100644 index 000000000..7e4b57297 --- /dev/null +++ b/hw/bsp/mimxrt1010_evk/board.h @@ -0,0 +1,36 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "fsl_device_registers.h" + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x1000000U) + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/mimxrt1010_evk/board.mk b/hw/bsp/mimxrt1010_evk/board.mk new file mode 100644 index 000000000..24a3dbdcd --- /dev/null +++ b/hw/bsp/mimxrt1010_evk/board.mk @@ -0,0 +1,52 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DCPU_MIMXRT1011DAE5A \ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough= + +MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1011 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MIMXRT1011xxxxx_flexspi_nor.ld + +SRC_C += \ + $(MCU_DIR)/system_MIMXRT1011.c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_common.c \ + $(MCU_DIR)/drivers/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1011.S + +# For TinyUSB port source +VENDOR = nxp +CHIP_FAMILY = transdimension + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1011DAE5A +JLINK_IF = swd + +# flash by copying bin file to DAP Mass Storage +flash: $(BUILD)/$(BOARD)-firmware.bin + cp $< /media/$(USER)/RT1010-EVK/ diff --git a/hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c b/hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c new file mode 100644 index 000000000..cd50a93d1 --- /dev/null +++ b/hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c @@ -0,0 +1,48 @@ +/* + * Copyright 2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1010_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 16u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h b/hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h new file mode 100644 index 000000000..4be2760be --- /dev/null +++ b/hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h @@ -0,0 +1,267 @@ +/* + * Copyright 2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1011_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/mimxrt1010_evk/mimxrt1010_evk.c b/hw/bsp/mimxrt1010_evk/mimxrt1010_evk.c new file mode 100644 index 000000000..a76e2d9b6 --- /dev/null +++ b/hw/bsp/mimxrt1010_evk/mimxrt1010_evk.c @@ -0,0 +1,170 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +#define LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11 +#define LED_PORT GPIO1 +#define LED_PIN 11 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_GPIO_SD_05_GPIO2_IO05 +#define BUTTON_PORT GPIO2 +#define BUTTON_PIN 5 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD +#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); + + //------------- USB0 -------------// + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy = USBPHY; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mimxrt1015_evk/board.h b/hw/bsp/mimxrt1015_evk/board.h new file mode 100644 index 000000000..5f3e31586 --- /dev/null +++ b/hw/bsp/mimxrt1015_evk/board.h @@ -0,0 +1,34 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x1000000U) + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/mimxrt1015_evk/board.mk b/hw/bsp/mimxrt1015_evk/board.mk new file mode 100644 index 000000000..a538c7dc2 --- /dev/null +++ b/hw/bsp/mimxrt1015_evk/board.mk @@ -0,0 +1,52 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DCPU_MIMXRT1015DAF5A \ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + +# mcu driver cause following warnings +CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough= + +MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1015 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MIMXRT1015xxxxx_flexspi_nor.ld + +SRC_C += \ + $(MCU_DIR)/system_MIMXRT1015.c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_common.c \ + $(MCU_DIR)/drivers/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1015.S + +# For TinyUSB port source +VENDOR = nxp +CHIP_FAMILY = transdimension + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1015DAF5A +JLINK_IF = swd + +# flash by copying bin file to DAP Mass Storage +flash: $(BUILD)/$(BOARD)-firmware.bin + cp $< /media/$(USER)/RT1015-EVK/ diff --git a/hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c b/hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c new file mode 100644 index 000000000..a396fe60d --- /dev/null +++ b/hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c @@ -0,0 +1,48 @@ +/* + * Copyright 2018-2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1015_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 16u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h b/hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h new file mode 100644 index 000000000..94af5a115 --- /dev/null +++ b/hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018-2019 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1015_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/mimxrt1015_evk/mimxrt1015_evk.c b/hw/bsp/mimxrt1015_evk/mimxrt1015_evk.c new file mode 100644 index 000000000..955344884 --- /dev/null +++ b/hw/bsp/mimxrt1015_evk/mimxrt1015_evk.c @@ -0,0 +1,170 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +#define LED_PINMUX IOMUXC_GPIO_SD_B1_01_GPIO3_IO21 +#define LED_PORT GPIO3 +#define LED_PIN 21 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_GPIO_EMC_09_GPIO2_IO09 +#define BUTTON_PORT GPIO2 +#define BUTTON_PIN 9 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); + + //------------- USB0 -------------// + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy = USBPHY; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mimxrt1020_evk/board.h b/hw/bsp/mimxrt1020_evk/board.h new file mode 100644 index 000000000..f1bd06369 --- /dev/null +++ b/hw/bsp/mimxrt1020_evk/board.h @@ -0,0 +1,34 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x800000U) + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/mimxrt1020_evk/board.mk b/hw/bsp/mimxrt1020_evk/board.mk new file mode 100644 index 000000000..83a570858 --- /dev/null +++ b/hw/bsp/mimxrt1020_evk/board.mk @@ -0,0 +1,53 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DCPU_MIMXRT1021DAG5A \ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + +# mcu driver cause following warnings +#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1021 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MIMXRT1021xxxxx_flexspi_nor.ld + +SRC_C += \ + $(MCU_DIR)/system_MIMXRT1021.c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_common.c \ + $(MCU_DIR)/drivers/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1021.S + +# For TinyUSB port source +VENDOR = nxp +CHIP_FAMILY = transdimension + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1021DAG5A +JLINK_IF = swd + +# flash by copying bin file to DAP Mass Storage +flash: $(BUILD)/$(BOARD)-firmware.bin + cp $< /media/$(USER)/RT1020-EVK/ diff --git a/hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c b/hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c new file mode 100644 index 000000000..6bafe195f --- /dev/null +++ b/hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1020_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 8u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h b/hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h new file mode 100644 index 000000000..f5e1aca5c --- /dev/null +++ b/hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1020_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/mimxrt1020_evk/mimxrt1020_evk.c b/hw/bsp/mimxrt1020_evk/mimxrt1020_evk.c new file mode 100644 index 000000000..708397f7f --- /dev/null +++ b/hw/bsp/mimxrt1020_evk/mimxrt1020_evk.c @@ -0,0 +1,169 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +#define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05 +#define LED_PORT GPIO1 +#define LED_PIN 5 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); + + //------------- USB0 -------------// + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy = USBPHY; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mimxrt1050_evkb/board.h b/hw/bsp/mimxrt1050_evkb/board.h new file mode 100644 index 000000000..3f660ac7d --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/board.h @@ -0,0 +1,34 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x4000000U) + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/mimxrt1050_evkb/board.mk b/hw/bsp/mimxrt1050_evkb/board.mk new file mode 100644 index 000000000..2303df11a --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/board.mk @@ -0,0 +1,53 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DCPU_MIMXRT1052DVL6B \ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + +# mcu driver cause following warnings +#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1052 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MIMXRT1052xxxxx_flexspi_nor.ld + +SRC_C += \ + $(MCU_DIR)/system_MIMXRT1052.c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_common.c \ + $(MCU_DIR)/drivers/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1052.S + +# For TinyUSB port source +VENDOR = nxp +CHIP_FAMILY = transdimension + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1052xxx6B +JLINK_IF = swd + +# flash by copying bin file to DAP Mass Storage +flash: $(BUILD)/$(BOARD)-firmware.bin + cp $< /media/$(USER)/RT1050-EVK/ diff --git a/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c new file mode 100644 index 000000000..af6eabc8e --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c @@ -0,0 +1,55 @@ +/* + * Copyright 2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkbimxrt1050_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t hyperflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_ExternalInputFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + .columnAddressWidth = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .controllerMiscOption = + (1u << kFlexSpiMiscOffset_DdrModeEnable) | (1u << kFlexSpiMiscOffset_WordAddressableEnable) | + (1u << kFlexSpiMiscOffset_SafeConfigFreqEnable) | (1u << kFlexSpiMiscOffset_DiffClkEnable), + .sflashPadType = kSerialFlash_8Pads, + .serialClkFreq = kFlexSpiSerialClk_133MHz, + .sflashA1Size = 64u * 1024u * 1024u, + .dataValidTime = {16u, 16u}, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_DDR, FLEXSPI_8PAD, 0xA0, RADDR_DDR, FLEXSPI_8PAD, 0x18), + FLEXSPI_LUT_SEQ(CADDR_DDR, FLEXSPI_8PAD, 0x10, DUMMY_DDR, FLEXSPI_8PAD, 0x06), + FLEXSPI_LUT_SEQ(READ_DDR, FLEXSPI_8PAD, 0x04, STOP, FLEXSPI_1PAD, 0x0), + }, + }, + .pageSize = 512u, + .sectorSize = 256u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = true, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h new file mode 100644 index 000000000..fe40e7ed7 --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2016, Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ +#define __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_133MHz = 7, + kFlexSpiSerialClk_166MHz = 8, + kFlexSpiSerialClk_200MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKBIMXRT1050_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c b/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c new file mode 100644 index 000000000..a21dcdbfc --- /dev/null +++ b/hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c @@ -0,0 +1,184 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIO1 +#define LED_PIN 9 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); + + //------------- USB0 -------------// + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy = USBPHY1; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; + + // USB1 +// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); +// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +void USB_OTG2_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_isr(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_isr(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mimxrt1060_evk/board.h b/hw/bsp/mimxrt1060_evk/board.h new file mode 100644 index 000000000..f1bd06369 --- /dev/null +++ b/hw/bsp/mimxrt1060_evk/board.h @@ -0,0 +1,34 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x800000U) + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/mimxrt1060_evk/board.mk b/hw/bsp/mimxrt1060_evk/board.mk new file mode 100644 index 000000000..4bfc48bbf --- /dev/null +++ b/hw/bsp/mimxrt1060_evk/board.mk @@ -0,0 +1,53 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DCPU_MIMXRT1062DVL6A \ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + +# mcu driver cause following warnings +#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1062 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MIMXRT1062xxxxx_flexspi_nor.ld + +SRC_C += \ + $(MCU_DIR)/system_MIMXRT1062.c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_common.c \ + $(MCU_DIR)/drivers/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1062.S + +# For TinyUSB port source +VENDOR = nxp +CHIP_FAMILY = transdimension + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1062xxx6A +JLINK_IF = swd + +# flash by copying bin file to DAP Mass Storage +flash: $(BUILD)/$(BOARD)-firmware.bin + cp $< /media/$(USER)/RT1060-EVK/ diff --git a/hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c b/hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c new file mode 100644 index 000000000..5df2b7c10 --- /dev/null +++ b/hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1060_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 8u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h b/hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h new file mode 100644 index 000000000..28d7db57d --- /dev/null +++ b/hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, + kFlexSpiSerialClk_166MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1060_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c b/hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c new file mode 100644 index 000000000..a21dcdbfc --- /dev/null +++ b/hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c @@ -0,0 +1,184 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIO1 +#define LED_PIN 9 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); + + //------------- USB0 -------------// + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy = USBPHY1; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; + + // USB1 +// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); +// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +void USB_OTG2_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_isr(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_isr(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/mimxrt1064_evk/board.h b/hw/bsp/mimxrt1064_evk/board.h new file mode 100644 index 000000000..3157e7d5e --- /dev/null +++ b/hw/bsp/mimxrt1064_evk/board.h @@ -0,0 +1,34 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + + +#ifndef BOARD_H_ +#define BOARD_H_ + +// required since iMX RT10xx SDK include this file for board size +#define BOARD_FLASH_SIZE (0x400000U) + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/mimxrt1064_evk/board.mk b/hw/bsp/mimxrt1064_evk/board.mk new file mode 100644 index 000000000..7b992da3e --- /dev/null +++ b/hw/bsp/mimxrt1064_evk/board.mk @@ -0,0 +1,53 @@ +CFLAGS += \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -D__ARMVFP__=0 -D__ARMFPV5__=0\ + -DCPU_MIMXRT1064DVL6A \ + -DXIP_EXTERNAL_FLASH=1 \ + -DXIP_BOOT_HEADER_ENABLE=1 \ + -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX + +# mcu driver cause following warnings +#CFLAGS += -Wno-error=float-equal -Wno-error=nested-externs +CFLAGS += -Wno-error=unused-parameter + +MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1064 + +# All source paths should be relative to the top level. +LD_FILE = $(MCU_DIR)/gcc/MIMXRT1064xxxxx_flexspi_nor.ld + +SRC_C += \ + $(MCU_DIR)/system_MIMXRT1064.c \ + $(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \ + $(MCU_DIR)/project_template/clock_config.c \ + $(MCU_DIR)/drivers/fsl_clock.c \ + $(MCU_DIR)/drivers/fsl_gpio.c \ + $(MCU_DIR)/drivers/fsl_common.c \ + $(MCU_DIR)/drivers/fsl_lpuart.c + +INC += \ + $(TOP)/hw/bsp/$(BOARD) \ + $(TOP)/$(MCU_DIR)/../../CMSIS/Include \ + $(TOP)/$(MCU_DIR) \ + $(TOP)/$(MCU_DIR)/drivers \ + $(TOP)/$(MCU_DIR)/project_template \ + +SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1064.S + +# For TinyUSB port source +VENDOR = nxp +CHIP_FAMILY = transdimension + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7 + +# For flash-jlink target +JLINK_DEVICE = MIMXRT1064xxx6A +JLINK_IF = swd + +# flash by copying bin file to DAP Mass Storage +flash: $(BUILD)/$(BOARD)-firmware.bin + cp $< /media/$(USER)/RT1064-EVK/ diff --git a/hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c b/hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c new file mode 100644 index 000000000..bfb1c2d59 --- /dev/null +++ b/hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c @@ -0,0 +1,49 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include "evkmimxrt1064_flexspi_nor_config.h" + +/* Component ID definition, used by tools. */ +#ifndef FSL_COMPONENT_ID +#define FSL_COMPONENT_ID "platform.drivers.xip_board" +#endif + +/******************************************************************************* + * Code + ******************************************************************************/ +#if defined(XIP_BOOT_HEADER_ENABLE) && (XIP_BOOT_HEADER_ENABLE == 1) +#if defined(__CC_ARM) || defined(__ARMCC_VERSION) || defined(__GNUC__) +__attribute__((section(".boot_hdr.conf"))) +#elif defined(__ICCARM__) +#pragma location = ".boot_hdr.conf" +#endif + +const flexspi_nor_config_t qspiflash_config = { + .memConfig = + { + .tag = FLEXSPI_CFG_BLK_TAG, + .version = FLEXSPI_CFG_BLK_VERSION, + .readSampleClkSrc = kFlexSPIReadSampleClk_LoopbackFromDqsPad, + .csHoldTime = 3u, + .csSetupTime = 3u, + // Enable DDR mode, Wordaddassable, Safe configuration, Differential clock + .sflashPadType = kSerialFlash_4Pads, + .serialClkFreq = kFlexSpiSerialClk_100MHz, + .sflashA1Size = 8u * 1024u * 1024u, + .lookupTable = + { + // Read LUTs + FLEXSPI_LUT_SEQ(CMD_SDR, FLEXSPI_1PAD, 0xEB, RADDR_SDR, FLEXSPI_4PAD, 0x18), + FLEXSPI_LUT_SEQ(DUMMY_SDR, FLEXSPI_4PAD, 0x06, READ_SDR, FLEXSPI_4PAD, 0x04), + }, + }, + .pageSize = 256u, + .sectorSize = 4u * 1024u, + .blockSize = 256u * 1024u, + .isUniformBlockSize = false, +}; +#endif /* XIP_BOOT_HEADER_ENABLE */ diff --git a/hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h b/hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h new file mode 100644 index 000000000..efdfe583f --- /dev/null +++ b/hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h @@ -0,0 +1,268 @@ +/* + * Copyright 2018 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ +#define __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ + +#include <stdint.h> +#include <stdbool.h> +#include "fsl_common.h" + +/*! @name Driver version */ +/*@{*/ +/*! @brief XIP_BOARD driver version 2.0.0. */ +#define FSL_XIP_BOARD_DRIVER_VERSION (MAKE_VERSION(2, 0, 0)) +/*@}*/ + +/* FLEXSPI memory config block related defintions */ +#define FLEXSPI_CFG_BLK_TAG (0x42464346UL) // ascii "FCFB" Big Endian +#define FLEXSPI_CFG_BLK_VERSION (0x56010400UL) // V1.4.0 +#define FLEXSPI_CFG_BLK_SIZE (512) + +/* FLEXSPI Feature related definitions */ +#define FLEXSPI_FEATURE_HAS_PARALLEL_MODE 1 + +/* Lookup table related defintions */ +#define CMD_INDEX_READ 0 +#define CMD_INDEX_READSTATUS 1 +#define CMD_INDEX_WRITEENABLE 2 +#define CMD_INDEX_WRITE 4 + +#define CMD_LUT_SEQ_IDX_READ 0 +#define CMD_LUT_SEQ_IDX_READSTATUS 1 +#define CMD_LUT_SEQ_IDX_WRITEENABLE 3 +#define CMD_LUT_SEQ_IDX_WRITE 9 + +#define CMD_SDR 0x01 +#define CMD_DDR 0x21 +#define RADDR_SDR 0x02 +#define RADDR_DDR 0x22 +#define CADDR_SDR 0x03 +#define CADDR_DDR 0x23 +#define MODE1_SDR 0x04 +#define MODE1_DDR 0x24 +#define MODE2_SDR 0x05 +#define MODE2_DDR 0x25 +#define MODE4_SDR 0x06 +#define MODE4_DDR 0x26 +#define MODE8_SDR 0x07 +#define MODE8_DDR 0x27 +#define WRITE_SDR 0x08 +#define WRITE_DDR 0x28 +#define READ_SDR 0x09 +#define READ_DDR 0x29 +#define LEARN_SDR 0x0A +#define LEARN_DDR 0x2A +#define DATSZ_SDR 0x0B +#define DATSZ_DDR 0x2B +#define DUMMY_SDR 0x0C +#define DUMMY_DDR 0x2C +#define DUMMY_RWDS_SDR 0x0D +#define DUMMY_RWDS_DDR 0x2D +#define JMP_ON_CS 0x1F +#define STOP 0 + +#define FLEXSPI_1PAD 0 +#define FLEXSPI_2PAD 1 +#define FLEXSPI_4PAD 2 +#define FLEXSPI_8PAD 3 + +#define FLEXSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1) \ + (FLEXSPI_LUT_OPERAND0(op0) | FLEXSPI_LUT_NUM_PADS0(pad0) | FLEXSPI_LUT_OPCODE0(cmd0) | FLEXSPI_LUT_OPERAND1(op1) | \ + FLEXSPI_LUT_NUM_PADS1(pad1) | FLEXSPI_LUT_OPCODE1(cmd1)) + +//!@brief Definitions for FlexSPI Serial Clock Frequency +typedef enum _FlexSpiSerialClockFreq +{ + kFlexSpiSerialClk_30MHz = 1, + kFlexSpiSerialClk_50MHz = 2, + kFlexSpiSerialClk_60MHz = 3, + kFlexSpiSerialClk_75MHz = 4, + kFlexSpiSerialClk_80MHz = 5, + kFlexSpiSerialClk_100MHz = 6, + kFlexSpiSerialClk_120MHz = 7, + kFlexSpiSerialClk_133MHz = 8, + kFlexSpiSerialClk_166MHz = 9, +} flexspi_serial_clk_freq_t; + +//!@brief FlexSPI clock configuration type +enum +{ + kFlexSpiClk_SDR, //!< Clock configure for SDR mode + kFlexSpiClk_DDR, //!< Clock configurat for DDR mode +}; + +//!@brief FlexSPI Read Sample Clock Source definition +typedef enum _FlashReadSampleClkSource +{ + kFlexSPIReadSampleClk_LoopbackInternally = 0, + kFlexSPIReadSampleClk_LoopbackFromDqsPad = 1, + kFlexSPIReadSampleClk_LoopbackFromSckPad = 2, + kFlexSPIReadSampleClk_ExternalInputFromDqsPad = 3, +} flexspi_read_sample_clk_t; + +//!@brief Misc feature bit definitions +enum +{ + kFlexSpiMiscOffset_DiffClkEnable = 0, //!< Bit for Differential clock enable + kFlexSpiMiscOffset_Ck2Enable = 1, //!< Bit for CK2 enable + kFlexSpiMiscOffset_ParallelEnable = 2, //!< Bit for Parallel mode enable + kFlexSpiMiscOffset_WordAddressableEnable = 3, //!< Bit for Word Addressable enable + kFlexSpiMiscOffset_SafeConfigFreqEnable = 4, //!< Bit for Safe Configuration Frequency enable + kFlexSpiMiscOffset_PadSettingOverrideEnable = 5, //!< Bit for Pad setting override enable + kFlexSpiMiscOffset_DdrModeEnable = 6, //!< Bit for DDR clock confiuration indication. +}; + +//!@brief Flash Type Definition +enum +{ + kFlexSpiDeviceType_SerialNOR = 1, //!< Flash devices are Serial NOR + kFlexSpiDeviceType_SerialNAND = 2, //!< Flash devices are Serial NAND + kFlexSpiDeviceType_SerialRAM = 3, //!< Flash devices are Serial RAM/HyperFLASH + kFlexSpiDeviceType_MCP_NOR_NAND = 0x12, //!< Flash device is MCP device, A1 is Serial NOR, A2 is Serial NAND + kFlexSpiDeviceType_MCP_NOR_RAM = 0x13, //!< Flash deivce is MCP device, A1 is Serial NOR, A2 is Serial RAMs +}; + +//!@brief Flash Pad Definitions +enum +{ + kSerialFlash_1Pad = 1, + kSerialFlash_2Pads = 2, + kSerialFlash_4Pads = 4, + kSerialFlash_8Pads = 8, +}; + +//!@brief FlexSPI LUT Sequence structure +typedef struct _lut_sequence +{ + uint8_t seqNum; //!< Sequence Number, valid number: 1-16 + uint8_t seqId; //!< Sequence Index, valid number: 0-15 + uint16_t reserved; +} flexspi_lut_seq_t; + +//!@brief Flash Configuration Command Type +enum +{ + kDeviceConfigCmdType_Generic, //!< Generic command, for example: configure dummy cycles, drive strength, etc + kDeviceConfigCmdType_QuadEnable, //!< Quad Enable command + kDeviceConfigCmdType_Spi2Xpi, //!< Switch from SPI to DPI/QPI/OPI mode + kDeviceConfigCmdType_Xpi2Spi, //!< Switch from DPI/QPI/OPI to SPI mode + kDeviceConfigCmdType_Spi2NoCmd, //!< Switch to 0-4-4/0-8-8 mode + kDeviceConfigCmdType_Reset, //!< Reset device command +}; + +//!@brief FlexSPI Memory Configuration Block +typedef struct _FlexSPIConfig +{ + uint32_t tag; //!< [0x000-0x003] Tag, fixed value 0x42464346UL + uint32_t version; //!< [0x004-0x007] Version,[31:24] -'V', [23:16] - Major, [15:8] - Minor, [7:0] - bugfix + uint32_t reserved0; //!< [0x008-0x00b] Reserved for future use + uint8_t readSampleClkSrc; //!< [0x00c-0x00c] Read Sample Clock Source, valid value: 0/1/3 + uint8_t csHoldTime; //!< [0x00d-0x00d] CS hold time, default value: 3 + uint8_t csSetupTime; //!< [0x00e-0x00e] CS setup time, default value: 3 + uint8_t columnAddressWidth; //!< [0x00f-0x00f] Column Address with, for HyperBus protocol, it is fixed to 3, For + //! Serial NAND, need to refer to datasheet + uint8_t deviceModeCfgEnable; //!< [0x010-0x010] Device Mode Configure enable flag, 1 - Enable, 0 - Disable + uint8_t deviceModeType; //!< [0x011-0x011] Specify the configuration command type:Quad Enable, DPI/QPI/OPI switch, + //! Generic configuration, etc. + uint16_t waitTimeCfgCommands; //!< [0x012-0x013] Wait time for all configuration commands, unit: 100us, Used for + //! DPI/QPI/OPI switch or reset command + flexspi_lut_seq_t deviceModeSeq; //!< [0x014-0x017] Device mode sequence info, [7:0] - LUT sequence id, [15:8] - LUt + //! sequence number, [31:16] Reserved + uint32_t deviceModeArg; //!< [0x018-0x01b] Argument/Parameter for device configuration + uint8_t configCmdEnable; //!< [0x01c-0x01c] Configure command Enable Flag, 1 - Enable, 0 - Disable + uint8_t configModeType[3]; //!< [0x01d-0x01f] Configure Mode Type, similar as deviceModeTpe + flexspi_lut_seq_t + configCmdSeqs[3]; //!< [0x020-0x02b] Sequence info for Device Configuration command, similar as deviceModeSeq + uint32_t reserved1; //!< [0x02c-0x02f] Reserved for future use + uint32_t configCmdArgs[3]; //!< [0x030-0x03b] Arguments/Parameters for device Configuration commands + uint32_t reserved2; //!< [0x03c-0x03f] Reserved for future use + uint32_t controllerMiscOption; //!< [0x040-0x043] Controller Misc Options, see Misc feature bit definitions for more + //! details + uint8_t deviceType; //!< [0x044-0x044] Device Type: See Flash Type Definition for more details + uint8_t sflashPadType; //!< [0x045-0x045] Serial Flash Pad Type: 1 - Single, 2 - Dual, 4 - Quad, 8 - Octal + uint8_t serialClkFreq; //!< [0x046-0x046] Serial Flash Frequencey, device specific definitions, See System Boot + //! Chapter for more details + uint8_t lutCustomSeqEnable; //!< [0x047-0x047] LUT customization Enable, it is required if the program/erase cannot + //! be done using 1 LUT sequence, currently, only applicable to HyperFLASH + uint32_t reserved3[2]; //!< [0x048-0x04f] Reserved for future use + uint32_t sflashA1Size; //!< [0x050-0x053] Size of Flash connected to A1 + uint32_t sflashA2Size; //!< [0x054-0x057] Size of Flash connected to A2 + uint32_t sflashB1Size; //!< [0x058-0x05b] Size of Flash connected to B1 + uint32_t sflashB2Size; //!< [0x05c-0x05f] Size of Flash connected to B2 + uint32_t csPadSettingOverride; //!< [0x060-0x063] CS pad setting override value + uint32_t sclkPadSettingOverride; //!< [0x064-0x067] SCK pad setting override value + uint32_t dataPadSettingOverride; //!< [0x068-0x06b] data pad setting override value + uint32_t dqsPadSettingOverride; //!< [0x06c-0x06f] DQS pad setting override value + uint32_t timeoutInMs; //!< [0x070-0x073] Timeout threshold for read status command + uint32_t commandInterval; //!< [0x074-0x077] CS deselect interval between two commands + uint16_t dataValidTime[2]; //!< [0x078-0x07b] CLK edge to data valid time for PORT A and PORT B, in terms of 0.1ns + uint16_t busyOffset; //!< [0x07c-0x07d] Busy offset, valid value: 0-31 + uint16_t busyBitPolarity; //!< [0x07e-0x07f] Busy flag polarity, 0 - busy flag is 1 when flash device is busy, 1 - + //! busy flag is 0 when flash device is busy + uint32_t lookupTable[64]; //!< [0x080-0x17f] Lookup table holds Flash command sequences + flexspi_lut_seq_t lutCustomSeq[12]; //!< [0x180-0x1af] Customizable LUT Sequences + uint32_t reserved4[4]; //!< [0x1b0-0x1bf] Reserved for future use +} flexspi_mem_config_t; + +/* */ +#define NOR_CMD_INDEX_READ CMD_INDEX_READ //!< 0 +#define NOR_CMD_INDEX_READSTATUS CMD_INDEX_READSTATUS //!< 1 +#define NOR_CMD_INDEX_WRITEENABLE CMD_INDEX_WRITEENABLE //!< 2 +#define NOR_CMD_INDEX_ERASESECTOR 3 //!< 3 +#define NOR_CMD_INDEX_PAGEPROGRAM CMD_INDEX_WRITE //!< 4 +#define NOR_CMD_INDEX_CHIPERASE 5 //!< 5 +#define NOR_CMD_INDEX_DUMMY 6 //!< 6 +#define NOR_CMD_INDEX_ERASEBLOCK 7 //!< 7 + +#define NOR_CMD_LUT_SEQ_IDX_READ CMD_LUT_SEQ_IDX_READ //!< 0 READ LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS \ + CMD_LUT_SEQ_IDX_READSTATUS //!< 1 Read Status LUT sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READSTATUS_XPI \ + 2 //!< 2 Read status DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE \ + CMD_LUT_SEQ_IDX_WRITEENABLE //!< 3 Write Enable sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_WRITEENABLE_XPI \ + 4 //!< 4 Write Enable DPI/QPI/OPI sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASESECTOR 5 //!< 5 Erase Sector sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_ERASEBLOCK 8 //!< 8 Erase Block sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM \ + CMD_LUT_SEQ_IDX_WRITE //!< 9 Program sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_CHIPERASE 11 //!< 11 Chip Erase sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_READ_SFDP 13 //!< 13 Read SFDP sequence in lookupTable id stored in config block +#define NOR_CMD_LUT_SEQ_IDX_RESTORE_NOCMD \ + 14 //!< 14 Restore 0-4-4/0-8-8 mode sequence id in lookupTable stored in config block +#define NOR_CMD_LUT_SEQ_IDX_EXIT_NOCMD \ + 15 //!< 15 Exit 0-4-4/0-8-8 mode sequence id in lookupTable stored in config blobk + +/* + * Serial NOR configuration block + */ +typedef struct _flexspi_nor_config +{ + flexspi_mem_config_t memConfig; //!< Common memory configuration info via FlexSPI + uint32_t pageSize; //!< Page size of Serial NOR + uint32_t sectorSize; //!< Sector size of Serial NOR + uint8_t ipcmdSerialClkFreq; //!< Clock frequency for IP command + uint8_t isUniformBlockSize; //!< Sector/Block size is the same + uint8_t reserved0[2]; //!< Reserved for future use + uint8_t serialNorType; //!< Serial NOR Flash type: 0/1/2/3 + uint8_t needExitNoCmdMode; //!< Need to exit NoCmd mode before other IP command + uint8_t halfClkForNonReadCmd; //!< Half the Serial Clock for non-read command: true/false + uint8_t needRestoreNoCmdMode; //!< Need to Restore NoCmd mode after IP commmand execution + uint32_t blockSize; //!< Block size + uint32_t reserve2[11]; //!< Reserved for future use +} flexspi_nor_config_t; + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef __cplusplus +} +#endif +#endif /* __EVKMIMXRT1064_FLEXSPI_NOR_CONFIG__ */ diff --git a/hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c b/hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c new file mode 100644 index 000000000..a21dcdbfc --- /dev/null +++ b/hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c @@ -0,0 +1,184 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "../board.h" +#include "fsl_device_registers.h" +#include "fsl_gpio.h" +#include "fsl_iomuxc.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" + +#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09 +#define LED_PORT GPIO1 +#define LED_PIN 9 +#define LED_STATE_ON 0 + +// SW8 button +#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00 +#define BUTTON_PORT GPIO5 +#define BUTTON_PIN 0 +#define BUTTON_STATE_ACTIVE 0 + +// UART +#define UART_PORT LPUART1 +#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX +#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX + +const uint8_t dcd_data[] = { 0x00 }; + +void board_init(void) +{ + // Init clock + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + // Enable IOCON clock + CLOCK_EnableClock(kCLOCK_Iomuxc); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) +// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + // LED + IOMUXC_SetPinMux( LED_PINMUX, 0U); + IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U); + + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode }; + GPIO_PinInit(LED_PORT, LED_PIN, &led_config); + board_led_write(true); + + // Button + IOMUXC_SetPinMux( BUTTON_PINMUX, 0U); + gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, }; + GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config); + + // UART + IOMUXC_SetPinMux( UART_TX_PINMUX, 0U); + IOMUXC_SetPinMux( UART_RX_PINMUX, 0U); + IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u); + IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u); + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U)); + + //------------- USB0 -------------// + // Clock + CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U); + CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U); + + USBPHY_Type* usb_phy = USBPHY1; + + // Enable PHY support for Low speed device + LS via FS Hub + usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK; + + // Enable all power for normal operation + usb_phy->PWD = 0; + + // TX Timing + uint32_t phytx = usb_phy->TX; + phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK); + phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06); + usb_phy->TX = phytx; + + // USB1 +// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U); +// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB_OTG1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +void USB_OTG2_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_isr(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_isr(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + // active low + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; +} + +int board_uart_write(void const * buf, int len) +{ + LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler(void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/ngx4330/board.mk b/hw/bsp/ngx4330/board.mk index b82ae9d5c..d95aaf056 100644 --- a/hw/bsp/ngx4330/board.mk +++ b/hw/bsp/ngx4330/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ @@ -10,14 +11,11 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -MCU_DIR = hw/mcu/nxp/lpc_driver/lpc43xx/lpc_chip_43xx +MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx # All source paths should be relative to the top level. LD_FILE = hw/bsp/$(BOARD)/ngx4330.ld -# TODO remove later -SRC_C += src/portable/$(VENDOR)/$(CHIP_FAMILY)/hal_$(CHIP_FAMILY).c - SRC_C += \ $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ $(MCU_DIR)/src/chip_18xx_43xx.c \ @@ -32,7 +30,7 @@ INC += \ # For TinyUSB port source VENDOR = nxp -CHIP_FAMILY = lpc18_43 +CHIP_FAMILY = transdimension # For freeRTOS port source FREERTOS_PORT = ARM_CM4 diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index 669180026..e1bafff8d 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -164,19 +164,19 @@ void board_init(void) #if CFG_TUSB_RHPORT0_MODE Chip_USB0_Init(); - // Reset controller - LPC_USB0->USBCMD_D |= 0x02; - while( LPC_USB0->USBCMD_D & 0x02 ) {} - - // Set mode - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); - - LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging - #else // TODO OTG - LPC_USB0->USBMODE_D = USBMODE_DEVICE; - LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/; - #endif +// // Reset controller +// LPC_USB0->USBCMD_D |= 0x02; +// while( LPC_USB0->USBCMD_D & 0x02 ) {} +// +// // Set mode +// #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST +// LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); +// +// LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging +// #else // TODO OTG +// LPC_USB0->USBMODE_D = USBMODE_DEVICE; +// LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/; +// #endif #endif /* USB1 @@ -200,19 +200,19 @@ void board_init(void) #if CFG_TUSB_RHPORT1_MODE Chip_USB1_Init(); - // Reset controller - LPC_USB1->USBCMD_D |= 0x02; - while( LPC_USB1->USBCMD_D & 0x02 ) {} - - // Set mode - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); - #else // TODO OTG - LPC_USB1->USBMODE_D = USBMODE_DEVICE; - #endif - - // USB1 as fullspeed - LPC_USB1->PORTSC1_D |= (1<<24); +// // Reset controller +// LPC_USB1->USBCMD_D |= 0x02; +// while( LPC_USB1->USBCMD_D & 0x02 ) {} +// +// // Set mode +// #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST +// LPC_USB1->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5); +// #else // TODO OTG +// LPC_USB1->USBMODE_D = USBMODE_DEVICE; +// #endif +// +// // USB1 as fullspeed +// LPC_USB1->PORTSC1_D |= (1<<24); // Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6); /* GPIO5[6] = USB1_PWR_EN */ // Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true); /* GPIO5[6] output high */ @@ -220,6 +220,31 @@ void board_init(void) } //--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_isr(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_isr(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_isr(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_isr(1); + #endif +} + +//--------------------------------------------------------------------+ // Board porting API //--------------------------------------------------------------------+ diff --git a/hw/bsp/nrf52840_mdk_dongle/board.mk b/hw/bsp/nrf52840_mdk_dongle/board.mk new file mode 100644 index 000000000..b92556002 --- /dev/null +++ b/hw/bsp/nrf52840_mdk_dongle/board.mk @@ -0,0 +1,62 @@ +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DNRF52840_XXAA \ + -DCFG_TUSB_MCU=OPT_MCU_NRF5X + +# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter + +# due to tusb_hal_nrf_power_event +GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) +ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) +CFLAGS += -Wno-error=cast-function-type +endif + +# All source paths should be relative to the top level. +LD_FILE = hw/bsp/$(BOARD)/$(BOARD).ld + +LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk + +SRC_C += \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ + hw/mcu/nordic/nrfx/mdk/system_nrf52840.c \ + +INC += \ + $(TOP)/hw/mcu/nordic/cmsis/Include \ + $(TOP)/hw/mcu/nordic \ + $(TOP)/hw/mcu/nordic/nrfx \ + $(TOP)/hw/mcu/nordic/nrfx/mdk \ + $(TOP)/hw/mcu/nordic/nrfx/hal \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ + +SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52840.S + +ASFLAGS += -D__HEAP_SIZE=0 + +# For TinyUSB port source +VENDOR = nordic +CHIP_FAMILY = nrf5x + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = nRF52840_xxAA +JLINK_IF = swd + +# flash using Nordic nrfutil (pip2 install nrfutil) +# make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash +NRFUTIL = nrfutil + +$(BUILD)/$(BOARD)-firmware.zip: $(BUILD)/$(BOARD)-firmware.hex + $(NRFUTIL) pkg generate --hw-version 52 --sd-req 0x0000 --debug-mode --application $^ $@ + +flash: $(BUILD)/$(BOARD)-firmware.zip + @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/nrf52840_mdk_dongle/nrf52840_mdk_dongle.c b/hw/bsp/nrf52840_mdk_dongle/nrf52840_mdk_dongle.c new file mode 100644 index 000000000..86f02d3e7 --- /dev/null +++ b/hw/bsp/nrf52840_mdk_dongle/nrf52840_mdk_dongle.c @@ -0,0 +1,190 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" + +#include "nrfx.h" +#include "nrfx/hal/nrf_gpio.h" +#include "nrfx/drivers/include/nrfx_power.h" + +#ifdef SOFTDEVICE_PRESENT +#include "nrf_sdm.h" +#include "nrf_soc.h" +#endif + +/*------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM + *------------------------------------------------------------------*/ +#define LED_PIN 23 +#define LED_STATE_ON 0 + +// Button 1 +#define BUTTON_PIN 18 +#define BUTTON_STATE_ACTIVE 0 + +// tinyusb function that handles power event (detected, ready, removed) +// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. +extern void tusb_hal_nrf_power_event(uint32_t event); + +void board_init(void) +{ + // Config clock source: XTAL or RC in sdk_config.h + NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk); + NRF_CLOCK->TASKS_LFCLKSTART = 1UL; + + // LED + nrf_gpio_cfg_output(LED_PIN); + board_led_write(false); + + // Button + nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock/1000); +#endif + +#if TUSB_OPT_DEVICE_ENABLED + // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice + // 2 is highest for application + NVIC_SetPriority(USBD_IRQn, 2); + + // USB power may already be ready at this time -> no event generated + // We need to invoke the handler based on the status initially + uint32_t usb_reg; + +#ifdef SOFTDEVICE_PRESENT + uint8_t sd_en = false; + sd_softdevice_is_enabled(&sd_en); + + if ( sd_en ) { + sd_power_usbdetected_enable(true); + sd_power_usbpwrrdy_enable(true); + sd_power_usbremoved_enable(true); + + sd_power_usbregstatus_get(&usb_reg); + }else +#endif + { + // Power module init + const nrfx_power_config_t pwr_cfg = { 0 }; + nrfx_power_init(&pwr_cfg); + + // Register tusb function as USB power handler + const nrfx_power_usbevt_config_t config = { .handler = (nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event }; + nrfx_power_usbevt_init(&config); + + nrfx_power_usbevt_enable(); + + usb_reg = NRF_POWER->USBREGSTATUS; + } + + if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); + if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +#ifdef SOFTDEVICE_PRESENT +// process SOC event from SD +uint32_t proc_soc(void) +{ + uint32_t soc_evt; + uint32_t err = sd_evt_get(&soc_evt); + + if (NRF_SUCCESS == err) + { + /*------------- usb power event handler -------------*/ + int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: + (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : + (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; + + if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); + } + + return err; +} + +uint32_t proc_ble(void) +{ + // do nothing with ble + return NRF_ERROR_NOT_FOUND; +} + +void SD_EVT_IRQHandler(void) +{ + // process BLE and SOC until there is no more events + while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) + { + + } +} + +void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) +{ + (void) id; + (void) pc; + (void) info; +} +#endif diff --git a/hw/bsp/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld b/hw/bsp/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld new file mode 100644 index 000000000..78eddc9c3 --- /dev/null +++ b/hw/bsp/nrf52840_mdk_dongle/nrf52840_mdk_dongle.ld @@ -0,0 +1,13 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xE0000-0x1000 + RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 +} + + +INCLUDE "nrf_common.ld" diff --git a/hw/bsp/pca10056/board.mk b/hw/bsp/pca10056/board.mk index abe0d642c..b4031844e 100644 --- a/hw/bsp/pca10056/board.mk +++ b/hw/bsp/pca10056/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ diff --git a/hw/bsp/pca10056/pca10056.c b/hw/bsp/pca10056/pca10056.c index 31fd5e9be..b9cc9fc36 100644 --- a/hw/bsp/pca10056/pca10056.c +++ b/hw/bsp/pca10056/pca10056.c @@ -84,10 +84,12 @@ void board_init(void) .pselcts = NRF_UARTE_PSEL_DISCONNECTED, .pselrts = NRF_UARTE_PSEL_DISCONNECTED, .p_context = NULL, - .hwfc = NRF_UARTE_HWFC_DISABLED, - .parity = NRF_UARTE_PARITY_EXCLUDED, .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE - .interrupt_priority = 7 + .interrupt_priority = 7, + .hal_cfg = { + .hwfc = NRF_UARTE_HWFC_DISABLED, + .parity = NRF_UARTE_PARITY_EXCLUDED, + } }; nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); diff --git a/hw/bsp/pca10059/board.mk b/hw/bsp/pca10059/board.mk index 15801054c..19ec3eaea 100644 --- a/hw/bsp/pca10059/board.mk +++ b/hw/bsp/pca10059/board.mk @@ -1,4 +1,5 @@ CFLAGS += \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ diff --git a/hw/bsp/pca10100/board.mk b/hw/bsp/pca10100/board.mk new file mode 100644 index 000000000..d7ac7ec4f --- /dev/null +++ b/hw/bsp/pca10100/board.mk @@ -0,0 +1,56 @@ +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -DNRF52833_XXAA \ + -DCONFIG_GPIO_AS_PINRESET \ + -DCFG_TUSB_MCU=OPT_MCU_NRF5X + +# nrfx issue undef _ARMCC_VERSION usage https://github.com/NordicSemiconductor/nrfx/issues/49 +CFLAGS += -Wno-error=undef -Wno-error=unused-parameter + +# due to tusb_hal_nrf_power_event +GCCVERSION = $(firstword $(subst ., ,$(shell arm-none-eabi-gcc -dumpversion))) +ifeq ($(shell expr $(GCCVERSION) \>= 8), 1) +CFLAGS += -Wno-error=cast-function-type +endif + +# All source paths should be relative to the top level. +LD_FILE = hw/mcu/nordic/nrfx/mdk/nrf52833_xxaa.ld + +LDFLAGS += -L$(TOP)/hw/mcu/nordic/nrfx/mdk + +SRC_C += \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_power.c \ + hw/mcu/nordic/nrfx/drivers/src/nrfx_uarte.c \ + hw/mcu/nordic/nrfx/mdk/system_nrf52833.c \ + +INC += \ + $(TOP)/hw/mcu/nordic/cmsis/Include \ + $(TOP)/hw/mcu/nordic \ + $(TOP)/hw/mcu/nordic/nrfx \ + $(TOP)/hw/mcu/nordic/nrfx/mdk \ + $(TOP)/hw/mcu/nordic/nrfx/hal \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/include \ + $(TOP)/hw/mcu/nordic/nrfx/drivers/src \ + +SRC_S += hw/mcu/nordic/nrfx/mdk/gcc_startup_nrf52833.S + +ASFLAGS += -D__HEAP_SIZE=0 + +# For TinyUSB port source +VENDOR = nordic +CHIP_FAMILY = nrf5x + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM4F + +# For flash-jlink target +JLINK_DEVICE = nRF52833_XXAA +JLINK_IF = swd + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/pca10100/pca10100.c b/hw/bsp/pca10100/pca10100.c new file mode 100644 index 000000000..b9cc9fc36 --- /dev/null +++ b/hw/bsp/pca10100/pca10100.c @@ -0,0 +1,223 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "bsp/board.h" + +#include "nrfx.h" +#include "nrfx/hal/nrf_gpio.h" +#include "nrfx/drivers/include/nrfx_power.h" +#include "nrfx/drivers/include/nrfx_uarte.h" + +#ifdef SOFTDEVICE_PRESENT +#include "nrf_sdm.h" +#include "nrf_soc.h" +#endif + +/*------------------------------------------------------------------*/ +/* MACRO TYPEDEF CONSTANT ENUM + *------------------------------------------------------------------*/ +#define LED_PIN 13 +#define LED_STATE_ON 0 + +#define BUTTON_PIN 11 +#define BUTTON_STATE_ACTIVE 0 + +#define UART_RX_PIN 8 +#define UART_TX_PIN 6 + +static nrfx_uarte_t _uart_id = NRFX_UARTE_INSTANCE(0); +//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context); + +// tinyusb function that handles power event (detected, ready, removed) +// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled. +extern void tusb_hal_nrf_power_event(uint32_t event); + +void board_init(void) +{ + // stop LF clock just in case we jump from application without reset + NRF_CLOCK->TASKS_LFCLKSTOP = 1UL; + + // Use Internal OSC to compatible with all boards + NRF_CLOCK->LFCLKSRC = CLOCK_LFCLKSRC_SRC_RC; + NRF_CLOCK->TASKS_LFCLKSTART = 1UL; + + // LED + nrf_gpio_cfg_output(LED_PIN); + board_led_write(false); + + // Button + nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock/1000); +#endif + + // UART + nrfx_uarte_config_t uart_cfg = + { + .pseltxd = UART_TX_PIN, + .pselrxd = UART_RX_PIN, + .pselcts = NRF_UARTE_PSEL_DISCONNECTED, + .pselrts = NRF_UARTE_PSEL_DISCONNECTED, + .p_context = NULL, + .baudrate = NRF_UARTE_BAUDRATE_115200, // CFG_BOARD_UART_BAUDRATE + .interrupt_priority = 7, + .hal_cfg = { + .hwfc = NRF_UARTE_HWFC_DISABLED, + .parity = NRF_UARTE_PARITY_EXCLUDED, + } + }; + + nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler); + +#if TUSB_OPT_DEVICE_ENABLED + // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice + // 2 is highest for application + NVIC_SetPriority(USBD_IRQn, 2); + + // USB power may already be ready at this time -> no event generated + // We need to invoke the handler based on the status initially + uint32_t usb_reg; + +#ifdef SOFTDEVICE_PRESENT + uint8_t sd_en = false; + sd_softdevice_is_enabled(&sd_en); + + if ( sd_en ) { + sd_power_usbdetected_enable(true); + sd_power_usbpwrrdy_enable(true); + sd_power_usbremoved_enable(true); + + sd_power_usbregstatus_get(&usb_reg); + }else +#endif + { + // Power module init + const nrfx_power_config_t pwr_cfg = { 0 }; + nrfx_power_init(&pwr_cfg); + + // Register tusb function as USB power handler + // cause cast-function-type warning + const nrfx_power_usbevt_config_t config = { .handler = ((nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event) }; + nrfx_power_usbevt_init(&config); + + nrfx_power_usbevt_enable(); + + usb_reg = NRF_POWER->USBREGSTATUS; + } + + if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED); + if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return BUTTON_STATE_ACTIVE == nrf_gpio_pin_read(BUTTON_PIN); +} + +//static void uart_handler(nrfx_uart_event_t const * p_event, void* p_context) +//{ +// +//} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +// return NRFX_SUCCESS == nrfx_uart_rx(&_uart_id, buf, (size_t) len) ? len : 0; +} + +int board_uart_write(void const * buf, int len) +{ + return (NRFX_SUCCESS == nrfx_uarte_tx(&_uart_id, (uint8_t const*) buf, (size_t) len)) ? len : 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +#ifdef SOFTDEVICE_PRESENT +// process SOC event from SD +uint32_t proc_soc(void) +{ + uint32_t soc_evt; + uint32_t err = sd_evt_get(&soc_evt); + + if (NRF_SUCCESS == err) + { + /*------------- usb power event handler -------------*/ + int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED ) ? NRFX_POWER_USB_EVT_DETECTED: + (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY : + (soc_evt == NRF_EVT_POWER_USB_REMOVED ) ? NRFX_POWER_USB_EVT_REMOVED : -1; + + if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt); + } + + return err; +} + +uint32_t proc_ble(void) +{ + // do nothing with ble + return NRF_ERROR_NOT_FOUND; +} + +void SD_EVT_IRQHandler(void) +{ + // process BLE and SOC until there is no more events + while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) ) + { + + } +} + +void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info) +{ + (void) id; + (void) pc; + (void) info; +} +#endif diff --git a/hw/bsp/pyboardv11/board.mk b/hw/bsp/pyboardv11/board.mk index ef9777976..0118b54a4 100644 --- a/hw/bsp/pyboardv11/board.mk +++ b/hw/bsp/pyboardv11/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=12000000 \ - -DSTM32F405xx \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -DSTM32F405xx \ + -DHSE_VALUE=12000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver diff --git a/hw/bsp/spresense/board.mk b/hw/bsp/spresense/board.mk index 16421686a..2e88cf994 100644 --- a/hw/bsp/spresense/board.mk +++ b/hw/bsp/spresense/board.mk @@ -1,12 +1,3 @@ -SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk - -INC += \ - $(SPRESENSE_SDK)/nuttx/include \ - $(SPRESENSE_SDK)/nuttx/arch \ - $(SPRESENSE_SDK)/nuttx/arch/chip \ - $(SPRESENSE_SDK)/sdk/bsp/include \ - $(SPRESENSE_SDK)/sdk/bsp/include/sdk \ - CFLAGS += \ -DCONFIG_WCHAR_BUILTIN \ -DCONFIG_HAVE_DOUBLE \ @@ -23,6 +14,15 @@ CFLAGS += \ -fomit-frame-pointer \ -DCFG_TUSB_MCU=OPT_MCU_CXD56 \ +SPRESENSE_SDK = $(TOP)/hw/mcu/sony/cxd56/spresense-exported-sdk + +INC += \ + $(SPRESENSE_SDK)/nuttx/include \ + $(SPRESENSE_SDK)/nuttx/arch \ + $(SPRESENSE_SDK)/nuttx/arch/chip \ + $(SPRESENSE_SDK)/sdk/bsp/include \ + $(SPRESENSE_SDK)/sdk/bsp/include/sdk \ + LIBS += \ $(SPRESENSE_SDK)/sdk/libs/libapps.a \ $(SPRESENSE_SDK)/sdk/libs/libsdk.a \ diff --git a/hw/bsp/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f070rbnucleo/board.mk index f930f6a85..6e52b8141 100644 --- a/hw/bsp/stm32f070rbnucleo/board.mk +++ b/hw/bsp/stm32f070rbnucleo/board.mk @@ -1,13 +1,14 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F070xB \ - -mthumb \ - -mabi=aapcs-linux \ - -mcpu=cortex-m0 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F0 + -flto \ + -mthumb \ + -mabi=aapcs-linux \ + -mcpu=cortex-m0 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DHSE_VALUE=8000000 \ + -DSTM32F070xB \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F0 # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter @@ -19,21 +20,21 @@ ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F0xx LD_FILE = hw/bsp/$(BOARD)/stm32F070rbtx_flash.ld SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32f0xx.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_uart.c + $(ST_CMSIS)/Source/Templates/system_stm32f0xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_uart.c SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s INC += \ - $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) # For TinyUSB port source VENDOR = st diff --git a/hw/bsp/stm32f072disco/board.mk b/hw/bsp/stm32f072disco/board.mk index 39715e83f..5ed87cfa8 100644 --- a/hw/bsp/stm32f072disco/board.mk +++ b/hw/bsp/stm32f072disco/board.mk @@ -1,13 +1,14 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F072xB \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F0 + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DSTM32F072xB \ + -DHSE_VALUE=8000000 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F0 # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter @@ -19,22 +20,22 @@ ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F0xx LD_FILE = hw/bsp/$(BOARD)/STM32F072RBTx_FLASH.ld SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32f0xx.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_uart.c + $(ST_CMSIS)/Source/Templates/system_stm32f0xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32f0xx_hal_uart.c SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s INC += \ - $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) # For TinyUSB port source VENDOR = st diff --git a/hw/bsp/stm32f072disco/stm32f072disco.c b/hw/bsp/stm32f072disco/stm32f072disco.c index aac1c5534..e26c5628a 100644 --- a/hw/bsp/stm32f072disco/stm32f072disco.c +++ b/hw/bsp/stm32f072disco/stm32f072disco.c @@ -43,9 +43,9 @@ #define UART_TX_PIN GPIO_PIN_9 #define UART_RX_PIN GPIO_PIN_10 - UART_HandleTypeDef UartHandle; + // enable all LED, Button, Uart, USB clock static void all_rcc_clk_enable(void) { diff --git a/hw/bsp/stm32f103bluepill/board.mk b/hw/bsp/stm32f103bluepill/board.mk index 26ad07b74..f464fa298 100644 --- a/hw/bsp/stm32f103bluepill/board.mk +++ b/hw/bsp/stm32f103bluepill/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F103xB \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F1 + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DSTM32F103xB \ + -DHSE_VALUE=8000000 \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F1 # mcu driver cause following warnings #CFLAGS += -Wno-error=unused-parameter @@ -18,21 +19,21 @@ ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F1xx LD_FILE = hw/bsp/$(BOARD)/STM32F103XB_FLASH.ld SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32f1xx.c \ - $(ST_HAL_DRIVER)/Src/stm32f1xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_gpio.c + $(ST_CMSIS)/Source/Templates/system_stm32f1xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f1xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f1xx_hal_gpio.c SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s INC += \ - $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) # For TinyUSB port source VENDOR = st diff --git a/hw/bsp/stm32f207nucleo/board.mk b/hw/bsp/stm32f207nucleo/board.mk index cd2b26204..003a3dd41 100644 --- a/hw/bsp/stm32f207nucleo/board.mk +++ b/hw/bsp/stm32f207nucleo/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F207xx \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m3 \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F2 + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m3 \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DSTM32F207xx \ + -DHSE_VALUE=8000000 \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F2 # mcu driver cause following warnings CFLAGS += -Wno-error=sign-compare @@ -18,21 +19,21 @@ ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F2xx LD_FILE = hw/bsp/$(BOARD)/STM32F207ZGTx_FLASH.ld SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32f2xx.c \ - $(ST_HAL_DRIVER)/Src/stm32f2xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_gpio.c + $(ST_CMSIS)/Source/Templates/system_stm32f2xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f2xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f2xx_hal_gpio.c SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f207xx.s INC += \ - $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) # For TinyUSB port source VENDOR = st diff --git a/hw/bsp/stm32f303disco/board.mk b/hw/bsp/stm32f303disco/board.mk index ab77c55c4..fbe034144 100644 --- a/hw/bsp/stm32f303disco/board.mk +++ b/hw/bsp/stm32f303disco/board.mk @@ -1,13 +1,14 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F303xC \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_STM32F3 + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m4 \ + -mfloat-abi=hard \ + -mfpu=fpv4-sp-d16 \ + -nostdlib -nostartfiles \ + -DSTM32F303xC \ + -DHSE_VALUE=8000000 \ + -DCFG_TUSB_MCU=OPT_MCU_STM32F3 # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter @@ -19,21 +20,21 @@ ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F3xx LD_FILE = hw/bsp/$(BOARD)/STM32F303VCTx_FLASH.ld SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32f3xx.c \ - $(ST_HAL_DRIVER)/Src/stm32f3xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_gpio.c + $(ST_CMSIS)/Source/Templates/system_stm32f3xx.c \ + $(ST_HAL_DRIVER)/Src/stm32f3xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32f3xx_hal_gpio.c SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f303xc.s + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f303xc.s INC += \ - $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) # For TinyUSB port source VENDOR = st diff --git a/hw/bsp/stm32f407disco/board.mk b/hw/bsp/stm32f407disco/board.mk index 4f4c10091..216b51bf9 100644 --- a/hw/bsp/stm32f407disco/board.mk +++ b/hw/bsp/stm32f407disco/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F407xx \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -DSTM32F407xx \ + -DHSE_VALUE=8000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver diff --git a/hw/bsp/stm32f411disco/board.mk b/hw/bsp/stm32f411disco/board.mk index dcfee33cf..63aa76154 100644 --- a/hw/bsp/stm32f411disco/board.mk +++ b/hw/bsp/stm32f411disco/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F411xE \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -DSTM32F411xE \ + -DHSE_VALUE=8000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver diff --git a/hw/bsp/stm32f412disco/board.mk b/hw/bsp/stm32f412disco/board.mk index e059c81d1..ddb8402ec 100644 --- a/hw/bsp/stm32f412disco/board.mk +++ b/hw/bsp/stm32f412disco/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F412Zx \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -DSTM32F412Zx \ + -DHSE_VALUE=8000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F4 # mcu driver cause following warnings diff --git a/hw/bsp/stm32f767nucleo/board.mk b/hw/bsp/stm32f767nucleo/board.mk index 46023334c..5d9645379 100644 --- a/hw/bsp/stm32f767nucleo/board.mk +++ b/hw/bsp/stm32f767nucleo/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32F767xx \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m7 \ -mfloat-abi=hard \ -mfpu=fpv5-d16 \ -nostdlib -nostartfiles \ + -DSTM32F767xx \ + -DHSE_VALUE=8000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32F7 # mcu driver cause following warnings diff --git a/hw/bsp/stm32h743nucleo/board.mk b/hw/bsp/stm32h743nucleo/board.mk index 40b36413f..cfea7f57b 100644 --- a/hw/bsp/stm32h743nucleo/board.mk +++ b/hw/bsp/stm32h743nucleo/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32H743xx \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m7 \ -mfloat-abi=hard \ -mfpu=fpv5-d16 \ -nostdlib -nostartfiles \ + -DSTM32H743xx \ + -DHSE_VALUE=8000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32H7 # mcu driver cause following warnings diff --git a/hw/bsp/stm32l0538disco/board.mk b/hw/bsp/stm32l0538disco/board.mk index 7e11fa6cd..d81b2d887 100644 --- a/hw/bsp/stm32l0538disco/board.mk +++ b/hw/bsp/stm32l0538disco/board.mk @@ -1,13 +1,14 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32L053xx \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m0plus \ - -mfloat-abi=soft \ - -nostdlib -nostartfiles \ - -DCFG_EXAMPLE_MSC_READONLY \ - -DCFG_TUSB_MCU=OPT_MCU_STM32L0 + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m0plus \ + -mfloat-abi=soft \ + -nostdlib -nostartfiles \ + -DSTM32L053xx \ + -DHSE_VALUE=8000000 \ + -DCFG_EXAMPLE_MSC_READONLY \ + -DCFG_TUSB_MCU=OPT_MCU_STM32L0 # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized @@ -19,21 +20,21 @@ ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32L0xx LD_FILE = hw/bsp/$(BOARD)/STM32L053C8Tx_FLASH.ld SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32l0xx.c \ - $(ST_HAL_DRIVER)/Src/stm32l0xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_gpio.c + $(ST_CMSIS)/Source/Templates/system_stm32l0xx.c \ + $(ST_HAL_DRIVER)/Src/stm32l0xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32l0xx_hal_gpio.c SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s + $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l053xx.s INC += \ - $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/hw/mcu/st/st_driver/CMSIS/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc \ + $(TOP)/hw/bsp/$(BOARD) # For TinyUSB port source VENDOR = st diff --git a/hw/bsp/stm32l476disco/board.mk b/hw/bsp/stm32l476disco/board.mk index c987fea64..3432ac2e5 100644 --- a/hw/bsp/stm32l476disco/board.mk +++ b/hw/bsp/stm32l476disco/board.mk @@ -1,12 +1,13 @@ CFLAGS += \ - -DHSE_VALUE=8000000 \ - -DSTM32L476xx \ + -flto \ -mthumb \ -mabi=aapcs \ -mcpu=cortex-m4 \ -mfloat-abi=hard \ -mfpu=fpv4-sp-d16 \ -nostdlib -nostartfiles \ + -DSTM32L476xx \ + -DHSE_VALUE=8000000 \ -DCFG_TUSB_MCU=OPT_MCU_STM32L4 ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32L4xx_HAL_Driver diff --git a/hw/mcu/nordic/nrfx b/hw/mcu/nordic/nrfx -Subproject 9d68726e41c321f1772c187bd12d82f5b13104f +Subproject 7a4c9d946cf1801771fc180acdbf7b878f27009 diff --git a/hw/mcu/nordic/nrfx_config.h b/hw/mcu/nordic/nrfx_config.h index 8f9aeffe5..6a974ba70 100644 --- a/hw/mcu/nordic/nrfx_config.h +++ b/hw/mcu/nordic/nrfx_config.h @@ -1,10 +1,18 @@ #ifndef NRFX_CONFIG_H__ #define NRFX_CONFIG_H__ -#define NRFX_POWER_ENABLED 1 -#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7 +#define NRFX_POWER_ENABLED 1 +#define NRFX_POWER_DEFAULT_CONFIG_IRQ_PRIORITY 7 + +#define NRFX_CLOCK_ENABLED 0 #define NRFX_UARTE_ENABLED 1 #define NRFX_UARTE0_ENABLED 1 +#define NRFX_UARTE1_ENABLED 0 +#define NRFX_UARTE2_ENABLED 0 +#define NRFX_UARTE3_ENABLED 0 + +#define NRFX_PRS_ENABLED 0 + #endif // NRFX_CONFIG_H__ diff --git a/hw/mcu/nxp b/hw/mcu/nxp new file mode 160000 +Subproject b618cb1d521cc9e133bdcd0fca154dee2d925df diff --git a/hw/mcu/nxp/lpc_driver b/hw/mcu/nxp/lpc_driver deleted file mode 160000 -Subproject fa206508e9ea289ceeb9c35442dd8002002f931 |