diff options
| author | hathach <[email protected]> | 2023-03-17 16:12:49 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2023-03-17 16:12:49 +0700 |
| commit | 3623ba1884ddff23e9b64766cb6dd032f1425846 (patch) | |
| tree | 5fc5ceddfdf79ce8c356df9114b3f3745d7eb492 /hw | |
| parent | 2faad42cb1d258155f714e5140bb27bc1ed30caf (diff) | |
fix trailing space and new line
temporarily disable codespell
Diffstat (limited to 'hw')
278 files changed, 1417 insertions, 1509 deletions
diff --git a/hw/bsp/ansi_escape.h b/hw/bsp/ansi_escape.h index 6e62ee20a..15af2f3ab 100644 --- a/hw/bsp/ansi_escape.h +++ b/hw/bsp/ansi_escape.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 14858c2b6..e715bdf2e 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/board.h b/hw/bsp/board.h index 0a10294d0..036556731 100644 --- a/hw/bsp/board.h +++ b/hw/bsp/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk index 52e9e45c4..77811d18d 100644 --- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk +++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk @@ -2,4 +2,4 @@ CFLAGS += -mcpu=arm1176jzf-s \ -DBCM_VERSION=2835 \ -DCFG_TUSB_MCU=OPT_MCU_BCM2835 -SUFFIX = +SUFFIX = diff --git a/hw/bsp/broadcom_32bit/family.c b/hw/bsp/broadcom_32bit/family.c index f7a11fb49..42ad4b666 100644 --- a/hw/bsp/broadcom_32bit/family.c +++ b/hw/bsp/broadcom_32bit/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h index 1d3565d5c..84a106346 100644 --- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h +++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/broadcom_64bit/family.c b/hw/bsp/broadcom_64bit/family.c index f7a11fb49..42ad4b666 100644 --- a/hw/bsp/broadcom_64bit/family.c +++ b/hw/bsp/broadcom_64bit/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c index 3b6b03904..f812c922f 100644 --- a/hw/bsp/brtmm90x/family.c +++ b/hw/bsp/brtmm90x/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2021 Bridgetek Pte Ltd @@ -70,7 +70,7 @@ void board_init(void) board_uart_write(WELCOME_MSG, sizeof(WELCOME_MSG)); #ifdef BOARD_GPIO_LED - gpio_function(BOARD_GPIO_LED, pad_func_0); + gpio_function(BOARD_GPIO_LED, pad_func_0); gpio_idrive(BOARD_GPIO_LED, pad_drive_12mA); gpio_dir(BOARD_GPIO_LED, pad_dir_output); #endif @@ -233,7 +233,7 @@ int board_uart_write(void const *buf, int len) uint32_t board_millis(void) { uint32_t safe_ms; - + CRITICAL_SECTION_BEGIN safe_ms = timer_ms; CRITICAL_SECTION_END @@ -254,4 +254,3 @@ void chip_reboot(void) dbg_memory_copy(0xfe, 0, 0, 255); #endif } - diff --git a/hw/bsp/brtmm90x/family.mk b/hw/bsp/brtmm90x/family.mk index 0ddf47a3a..6df0bfdfe 100644 --- a/hw/bsp/brtmm90x/family.mk +++ b/hw/bsp/brtmm90x/family.mk @@ -5,7 +5,7 @@ SKIP_NANOLIB = 1 # Set to use FT90X prebuilt libraries. FT9XX_PREBUILT_LIBS = 0 ifeq ($(FT9XX_PREBUILT_LIBS),1) -# If the FT90X toolchain is installed on Windows systems then the SDK +# If the FT90X toolchain is installed on Windows systems then the SDK # include files and prebuilt libraries are at: %FT90X_TOOLCHAIN%/hardware FT9XX_SDK = $(FT90X_TOOLCHAIN)/hardware INC += "$(FT9XX_SDK)/include" @@ -21,7 +21,7 @@ endif # Add include files which are within the TinyUSB directory structure. INC += \ - $(TOP)/$(BOARD_PATH) + $(TOP)/$(BOARD_PATH) # Add required C Compiler flags for FT90X. CFLAGS += \ @@ -30,7 +30,7 @@ CFLAGS += \ -fvar-tracking-assignments \ -fmessage-length=0 \ -ffunction-sections \ - -DCFG_TUSB_MCU=OPT_MCU_FT90X + -DCFG_TUSB_MCU=OPT_MCU_FT90X # Maximum USB device speed supported by the board CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED @@ -45,7 +45,7 @@ LDFLAGS += $(addprefix -L,$(LDINC)) \ -Wl,-lc # Additional Source files for FT90X. -SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c +SRC_C += src/portable/bridgetek/ft9xx/dcd_ft9xx.c # Linker library. ifneq ($(FT9XX_PREBUILT_LIBS),1) diff --git a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h index 0eab34916..7b488096e 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h +++ b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2023 Ha Thach (tinyusb.org) for Adafruit Industries diff --git a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c index 45fc9e3aa..db3551ca7 100644 --- a/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c +++ b/hw/bsp/ch32v307/boards/ch32v307v-r1-1v0/debug_uart.c @@ -36,7 +36,7 @@ static unsigned int tx_produce; static volatile unsigned int tx_consume; void USART1_IRQHandler(void) __attribute__((naked)); -void USART1_IRQHandler(void) { +void USART1_IRQHandler(void) { __asm volatile ("call USART1_IRQHandler_impl; mret"); } @@ -57,7 +57,7 @@ __attribute__((used)) void USART1_IRQHandler_impl(void) void uart_write(char c) { unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; - + NVIC_DisableIRQ(USART1_IRQn); if((tx_consume != tx_produce) || (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)) { tx_buf[tx_produce] = c; diff --git a/hw/bsp/ch32v307/ch32v307.ld b/hw/bsp/ch32v307/ch32v307.ld index af7c06615..55bd10cd0 100644 --- a/hw/bsp/ch32v307/ch32v307.ld +++ b/hw/bsp/ch32v307/ch32v307.ld @@ -41,7 +41,7 @@ SECTIONS *(.glue_7t) *(.gnu.linkonce.t.*) . = ALIGN(4); - } >FLASH AT>FLASH + } >FLASH AT>FLASH .fini : { @@ -50,31 +50,31 @@ SECTIONS } >FLASH AT>FLASH PROVIDE( _etext = . ); - PROVIDE( _eitcm = . ); + PROVIDE( _eitcm = . ); .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array)) PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*))) KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors)) PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*))) KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors)) PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .ctors : { /* gcc uses crtbegin.o to find the start of @@ -95,8 +95,8 @@ SECTIONS KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) - } >FLASH AT>FLASH - + } >FLASH AT>FLASH + .dtors : { KEEP (*crtbegin.o(.dtors)) @@ -104,17 +104,17 @@ SECTIONS KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) - } >FLASH AT>FLASH + } >FLASH AT>FLASH .dalign : { . = ALIGN(4); PROVIDE(_data_vma = .); - } >RAM AT>FLASH + } >RAM AT>FLASH .dlalign : { - . = ALIGN(4); + . = ALIGN(4); PROVIDE(_data_lma = .); } >FLASH AT>FLASH @@ -145,7 +145,7 @@ SECTIONS *(.sbss*) *(.gnu.linkonce.sb.*) *(.bss*) - *(.gnu.linkonce.b.*) + *(.gnu.linkonce.b.*) *(COMMON*) . = ALIGN(4); PROVIDE( _ebss = .); @@ -156,15 +156,12 @@ SECTIONS .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size : { - PROVIDE( _heap_end = . ); + PROVIDE( _heap_end = . ); . = ALIGN(4); PROVIDE(_susrstack = . ); . = . + __stack_size; PROVIDE( _eusrstack = .); __freertos_irq_stack_top = .; - } >RAM + } >RAM } - - - diff --git a/hw/bsp/ch32v307/ch32v30x_conf.h b/hw/bsp/ch32v307/ch32v30x_conf.h index 399feaf68..0b86ad390 100644 --- a/hw/bsp/ch32v307/ch32v30x_conf.h +++ b/hw/bsp/ch32v307/ch32v30x_conf.h @@ -6,7 +6,7 @@ * Description : Library configuration file. * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 -*******************************************************************************/ +*******************************************************************************/ #ifndef __CH32V30x_CONF_H #define __CH32V30x_CONF_H @@ -36,8 +36,3 @@ #endif /* __CH32V30x_CONF_H */ - - - - - diff --git a/hw/bsp/ch32v307/ch32v30x_it.c b/hw/bsp/ch32v307/ch32v30x_it.c index d348dd989..c329c5613 100644 --- a/hw/bsp/ch32v307/ch32v30x_it.c +++ b/hw/bsp/ch32v307/ch32v30x_it.c @@ -45,5 +45,3 @@ __attribute__((used)) void HardFault_Handler_impl(void) { } } - - diff --git a/hw/bsp/ch32v307/ch32v30x_it.h b/hw/bsp/ch32v307/ch32v30x_it.h index 42f285edf..f3977a8be 100644 --- a/hw/bsp/ch32v307/ch32v30x_it.h +++ b/hw/bsp/ch32v307/ch32v30x_it.h @@ -14,5 +14,3 @@ #endif /* __CH32V30x_IT_H */ - - diff --git a/hw/bsp/ch32v307/core_riscv.h b/hw/bsp/ch32v307/core_riscv.h index 2e94ec683..a7ce10a00 100644 --- a/hw/bsp/ch32v307/core_riscv.h +++ b/hw/bsp/ch32v307/core_riscv.h @@ -336,7 +336,7 @@ RV_STATIC_INLINE void NVIC_SystemReset(void) } -/* Core_Exported_Functions */ +/* Core_Exported_Functions */ extern uint32_t __get_FFLAGS(void); extern void __set_FFLAGS(uint32_t value); extern uint32_t __get_FRM(void); @@ -377,8 +377,3 @@ extern uint32_t __get_SP(void); #endif - - - - - diff --git a/hw/bsp/ch32v307/system_ch32v30x.c b/hw/bsp/ch32v307/system_ch32v30x.c index 12b18d7b8..23f783df4 100644 --- a/hw/bsp/ch32v307/system_ch32v30x.c +++ b/hw/bsp/ch32v307/system_ch32v30x.c @@ -8,17 +8,17 @@ * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 *********************************************************************************/ -#include "ch32v30x.h" +#include "ch32v30x.h" -/* -* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after +/* +* Uncomment the line corresponding to the desired System clock (SYSCLK) frequency (after * reset the HSI is used as SYSCLK source). -* If none of the define below is enabled, the HSI is used as System clock source. +* If none of the define below is enabled, the HSI is used as System clock source. */ // #define SYSCLK_FREQ_HSE HSE_VALUE -/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ //#define SYSCLK_FREQ_48MHz 48000000 -/* #define SYSCLK_FREQ_56MHz 56000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ //#define SYSCLK_FREQ_72MHz 72000000 //#define SYSCLK_FREQ_96MHz 96000000 //#define SYSCLK_FREQ_120MHz 120000000 @@ -60,7 +60,7 @@ static void SetSysClock(void); #elif defined SYSCLK_FREQ_48MHz static void SetSysClockTo48(void); #elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); + static void SetSysClockTo56(void); #elif defined SYSCLK_FREQ_72MHz static void SetSysClockTo72(void); @@ -90,7 +90,7 @@ void SystemInit (void) RCC->CFGR0 &= (uint32_t)0xF8FF0000; #else RCC->CFGR0 &= (uint32_t)0xF0FF0000; -#endif +#endif RCC->CTLR &= (uint32_t)0xFEF6FFFF; RCC->CTLR &= (uint32_t)0xFFFBFFFF; @@ -101,8 +101,8 @@ void SystemInit (void) RCC->INTR = 0x00FF0000; RCC->CFGR2 = 0x00000000; #else - RCC->INTR = 0x009F0000; -#endif + RCC->INTR = 0x009F0000; +#endif SetSysClock(); } @@ -118,18 +118,18 @@ void SystemCoreClockUpdate (void) uint32_t tmp = 0, pllmull = 0, pllsource = 0, Pll_6_5 = 0; tmp = RCC->CFGR0 & RCC_SWS; - + switch (tmp) { case 0x00: SystemCoreClock = HSI_VALUE; break; - case 0x04: + case 0x04: SystemCoreClock = HSE_VALUE; break; - case 0x08: + case 0x08: pllmull = RCC->CFGR0 & RCC_PLLMULL; - pllsource = RCC->CFGR0 & RCC_PLLSRC; + pllsource = RCC->CFGR0 & RCC_PLLSRC; pllmull = ( pllmull >> 18) + 2; #ifdef CH32V30x_D8 @@ -149,7 +149,7 @@ void SystemCoreClockUpdate (void) SystemCoreClock = (HSI_VALUE >> 1) * pllmull; } else - { + { if ((RCC->CFGR0 & RCC_PLLXTPRE) != (uint32_t)RESET) { SystemCoreClock = (HSE_VALUE >> 1) * pllmull; @@ -167,9 +167,9 @@ void SystemCoreClockUpdate (void) SystemCoreClock = HSI_VALUE; break; } - + tmp = AHBPrescTable[((RCC->CFGR0 & RCC_HPRE) >> 4)]; - SystemCoreClock >>= tmp; + SystemCoreClock >>= tmp; } /********************************************************************* @@ -188,7 +188,7 @@ static void SetSysClock(void) #elif defined SYSCLK_FREQ_48MHz SetSysClockTo48(); #elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); + SetSysClockTo56(); #elif defined SYSCLK_FREQ_72MHz SetSysClockTo72(); #elif defined SYSCLK_FREQ_96MHz @@ -199,9 +199,9 @@ static void SetSysClock(void) SetSysClockTo144(); #endif - + /* If none of the define above is enabled, the HSI is used as System clock - * source (default after reset) + * source (default after reset) */ } @@ -218,14 +218,14 @@ static void SetSysClock(void) static void SetSysClockToHSE(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -235,20 +235,20 @@ static void SetSysClockToHSE(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; - + /* Select HSE as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; + RCC->CFGR0 |= (uint32_t)RCC_SW_HSE; /* Wait till HSE is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x04) @@ -256,11 +256,11 @@ static void SetSysClockToHSE(void) } } else - { + { /* If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_24MHz @@ -275,14 +275,14 @@ static void SetSysClockToHSE(void) static void SetSysClockTo24(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -292,13 +292,13 @@ static void SetSysClockTo24(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV1; @@ -318,18 +318,18 @@ static void SetSysClockTo24(void) } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_48MHz @@ -344,14 +344,14 @@ static void SetSysClockTo24(void) static void SetSysClockTo48(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - + + RCC->CTLR |= ((uint32_t)RCC_HSEON); /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -361,14 +361,14 @@ static void SetSysClockTo48(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; @@ -389,19 +389,19 @@ static void SetSysClockTo48(void) } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_56MHz @@ -416,14 +416,14 @@ static void SetSysClockTo48(void) static void SetSysClockTo56(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -433,17 +433,17 @@ static void SetSysClockTo56(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; - + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); @@ -462,19 +462,19 @@ static void SetSysClockTo56(void) /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ - } + } } #elif defined SYSCLK_FREQ_72MHz @@ -489,14 +489,14 @@ static void SetSysClockTo56(void) static void SetSysClockTo72(void) { __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - + RCC->CTLR |= ((uint32_t)RCC_HSEON); - + /* Wait till HSE is ready and if Time out is reached exit */ do { HSEStatus = RCC->CTLR & RCC_HSERDY; - StartUpCounter++; + StartUpCounter++; } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); if ((RCC->CTLR & RCC_HSERDY) != RESET) @@ -506,17 +506,17 @@ static void SetSysClockTo72(void) else { HSEStatus = (uint32_t)0x00; - } + } if (HSEStatus == (uint32_t)0x01) { /* HCLK = SYSCLK */ - RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_HPRE_DIV1; /* PCLK2 = HCLK */ - RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; + RCC->CFGR0 |= (uint32_t)RCC_PPRE2_DIV1; /* PCLK1 = HCLK */ RCC->CFGR0 |= (uint32_t)RCC_PPRE1_DIV2; - + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_PLLSRC | RCC_PLLXTPRE | RCC_PLLMULL)); @@ -532,20 +532,20 @@ static void SetSysClockTo72(void) /* Wait till PLL is ready */ while((RCC->CTLR & RCC_PLLRDY) == 0) { - } + } /* Select PLL as system clock source */ RCC->CFGR0 &= (uint32_t)((uint32_t)~(RCC_SW)); - RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; + RCC->CFGR0 |= (uint32_t)RCC_SW_PLL; /* Wait till PLL is used as system clock source */ while ((RCC->CFGR0 & (uint32_t)RCC_SWS) != (uint32_t)0x08) { } } else - { + { /* * If HSE fails to start-up, the application will have wrong clock - * configuration. User can add here some code to deal with this error + * configuration. User can add here some code to deal with this error */ } } diff --git a/hw/bsp/ch32v307/system_ch32v30x.h b/hw/bsp/ch32v307/system_ch32v30x.h index 0e0ef4e51..ad81058c7 100644 --- a/hw/bsp/ch32v307/system_ch32v30x.h +++ b/hw/bsp/ch32v307/system_ch32v30x.h @@ -7,16 +7,16 @@ * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd. * SPDX-License-Identifier: Apache-2.0 *******************************************************************************/ -#ifndef __SYSTEM_CH32V30x_H +#ifndef __SYSTEM_CH32V30x_H #define __SYSTEM_CH32V30x_H #ifdef __cplusplus extern "C" { -#endif +#endif extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ -/* System_Exported_Functions */ +/* System_Exported_Functions */ extern void SystemInit(void); extern void SystemCoreClockUpdate(void); @@ -25,6 +25,3 @@ extern void SystemCoreClockUpdate(void); #endif #endif /*__CH32V30x_SYSTEM_H */ - - - diff --git a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c index a4d996810..3abb488f2 100644 --- a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c +++ b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/hw/bsp/da14695_dk_usb/da1469x.ld b/hw/bsp/da14695_dk_usb/da1469x.ld index 96507d6e7..8cc1d9d99 100644 --- a/hw/bsp/da14695_dk_usb/da1469x.ld +++ b/hw/bsp/da14695_dk_usb/da1469x.ld @@ -242,4 +242,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c index 13113fb95..abe7f54cb 100644 --- a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c +++ b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 Jerzy Kasenberg diff --git a/hw/bsp/da1469x_dk_pro/da1469x.ld b/hw/bsp/da1469x_dk_pro/da1469x.ld index 96507d6e7..8cc1d9d99 100644 --- a/hw/bsp/da1469x_dk_pro/da1469x.ld +++ b/hw/bsp/da1469x_dk_pro/da1469x.ld @@ -242,4 +242,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/bsp/ea4088qs/ea4088qs.c b/hw/bsp/ea4088qs/ea4088qs.c index 7150ed393..ace72fef0 100644 --- a/hw/bsp/ea4088qs/ea4088qs.c +++ b/hw/bsp/ea4088qs/ea4088qs.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ea4088qs/lpc4088.ld b/hw/bsp/ea4088qs/lpc4088.ld index 4b1cddd6e..5897707f6 100644 --- a/hw/bsp/ea4088qs/lpc4088.ld +++ b/hw/bsp/ea4088qs/lpc4088.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ - RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc64 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x10000 /* 64K bytes (alias RAM) */ + RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ - __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ - __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc64 = 0x10000000 ; /* RamLoc64 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc64 = 0x10000000 + 0x10000 ; /* 64K bytes */ + __top_RAM = 0x10000000 + 0x10000 ; /* 64K bytes */ + __base_RamPeriph32 = 0x20000000 ; /* RamPeriph32 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_RamPeriph32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x20000000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamPeriph32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamPeriph32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamPeriph32 + } > RamPeriph32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamPeriph32*) . = ALIGN(4) ; - } > RamPeriph32 + } > RamPeriph32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc64 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc64 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c index f88d3b89e..68bcaa123 100644 --- a/hw/bsp/ea4357/ea4357.c +++ b/hw/bsp/ea4357/ea4357.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ea4357/lpc4357.ld b/hw/bsp/ea4357/lpc4357.ld index 14a0df328..e3dfbfda1 100644 --- a/hw/bsp/ea4357/lpc4357.ld +++ b/hw/bsp/ea4357/lpc4357.ld @@ -11,44 +11,44 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ - __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ - __base_Flash = 0x1a000000 ; /* Flash */ - __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ - __base_Flash2 = 0x1b000000 ; /* Flash2 */ - __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ + __base_Flash = 0x1a000000 ; /* Flash */ + __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ + __base_Flash2 = 0x1b000000 ; /* Flash2 */ + __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -119,9 +119,9 @@ SECTIONS } > MFlashA512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlashA512 @@ -135,7 +135,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -216,7 +216,7 @@ SECTIONS *(.bss.$RamLoc40*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 + } > RamLoc40 /* BSS section for RamAHB32 */ .bss_RAM3 : ALIGN(4) @@ -226,7 +226,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 + } > RamAHB32 /* BSS section for RamAHB16 */ .bss_RAM4 : ALIGN(4) @@ -236,7 +236,7 @@ SECTIONS *(.bss.$RamAHB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 + } > RamAHB16 /* BSS section for RamAHB_ETB16 */ .bss_RAM5 : ALIGN(4) @@ -246,7 +246,7 @@ SECTIONS *(.bss.$RamAHB_ETB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -265,7 +265,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamLoc40*) . = ALIGN(4) ; - } > RamLoc40 + } > RamLoc40 /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -273,7 +273,7 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* NOINIT section for RamAHB16 */ .noinit_RAM4 (NOLOAD) : ALIGN(4) @@ -281,7 +281,7 @@ SECTIONS *(.noinit.$RAM4*) *(.noinit.$RamAHB16*) . = ALIGN(4) ; - } > RamAHB16 + } > RamAHB16 /* NOINIT section for RamAHB_ETB16 */ .noinit_RAM5 (NOLOAD) : ALIGN(4) @@ -289,13 +289,13 @@ SECTIONS *(.noinit.$RAM5*) *(.noinit.$RamAHB_ETB16*) . = ALIGN(4) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -303,11 +303,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -321,4 +321,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/ea4357/pca9532.c b/hw/bsp/ea4357/pca9532.c index eae3805c2..150167cde 100644 --- a/hw/bsp/ea4357/pca9532.c +++ b/hw/bsp/ea4357/pca9532.c @@ -57,7 +57,7 @@ static uint16_t ledStateShadow = 0; * Local Functions *****************************************************************************/ -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) +static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) { I2CM_XFER_T i2cData; @@ -75,7 +75,7 @@ static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) return SUCCESS; } -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) +static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) { I2CM_XFER_T i2cData; @@ -181,7 +181,7 @@ uint16_t pca9532_getLedState (uint32_t shadow) * A blinking LED may be reported as on or off depending on * its state when reading the Input register. */ - + buf[0] = PCA9532_INPUT0; I2CWrite(PCA9532_I2C_ADDR, buf, 1); diff --git a/hw/bsp/ea4357/pca9532.h b/hw/bsp/ea4357/pca9532.h index 7a7c6e145..f21c1ff09 100644 --- a/hw/bsp/ea4357/pca9532.h +++ b/hw/bsp/ea4357/pca9532.h @@ -48,7 +48,7 @@ #define KEY_MASK 0x000F /* - * MMC Card Detect and MMC Write Protect are mapped to LED4 + * MMC Card Detect and MMC Write Protect are mapped to LED4 * and LED5 on the PCA9532. Please note that WP is active low. */ diff --git a/hw/bsp/esp32s2/boards/CMakeLists.txt b/hw/bsp/esp32s2/boards/CMakeLists.txt index c3c687a70..ff90acbde 100644 --- a/hw/bsp/esp32s2/boards/CMakeLists.txt +++ b/hw/bsp/esp32s2/boards/CMakeLists.txt @@ -8,5 +8,5 @@ include("${BOARD}/board.cmake") target_include_directories(${COMPONENT_TARGET} PUBLIC "${TOP}/hw" - "${TOP}/src" + "${TOP}/src" ) diff --git a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake index d33962676..e39ceb887 100644 --- a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h index 43e00901d..1f8dc2cea 100644 --- a/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_feather_esp32s2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake index d33962676..e39ceb887 100644 --- a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h index 16e30b685..084a7aaf2 100644 --- a/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_magtag_29gray/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake +++ b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h index 49a2474bc..2ec80ef47 100644 --- a/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h +++ b/hw/bsp/esp32s2/boards/adafruit_metro_esp32s2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/esp32s2.c b/hw/bsp/esp32s2/boards/esp32s2.c index a7ca82deb..015d8305b 100644 --- a/hw/bsp/esp32s2/boards/esp32s2.c +++ b/hw/bsp/esp32s2/boards/esp32s2.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -150,4 +150,3 @@ int board_uart_write(void const * buf, int len) (void) buf; (void) len; return 0; } - diff --git a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake +++ b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h index 6bb44f76d..0acb9c439 100644 --- a/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h +++ b/hw/bsp/esp32s2/boards/espressif_kaluga_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake b/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake index d5c17b9be..16b0e9cdd 100644 --- a/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake +++ b/hw/bsp/esp32s2/boards/espressif_saola_1/board.cmake @@ -14,4 +14,4 @@ set(IDF_TARGET "esp32s2" FORCE) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S2" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s2/boards/espressif_saola_1/board.h b/hw/bsp/esp32s2/boards/espressif_saola_1/board.h index f450b9a8b..e068efef9 100644 --- a/hw/bsp/esp32s2/boards/espressif_saola_1/board.h +++ b/hw/bsp/esp32s2/boards/espressif_saola_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt b/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt index 6d0fcbc86..8266c5a1c 100644 --- a/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt +++ b/hw/bsp/esp32s2/components/led_strip/CMakeLists.txt @@ -5,4 +5,3 @@ idf_component_register(SRCS "${component_srcs}" PRIV_INCLUDE_DIRS "" PRIV_REQUIRES "driver" REQUIRES "") - diff --git a/hw/bsp/esp32s2/family.cmake b/hw/bsp/esp32s2/family.cmake index f3d41d041..0973adcac 100644 --- a/hw/bsp/esp32s2/family.cmake +++ b/hw/bsp/esp32s2/family.cmake @@ -1,7 +1,7 @@ cmake_minimum_required(VERSION 3.5) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s2/boards" "${TOP}/hw/bsp/esp32s2/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s2) set(FAMILY_MCUS ESP32S2) diff --git a/hw/bsp/esp32s2/family.mk b/hw/bsp/esp32s2/family.mk index b95098e15..fba0f038b 100644 --- a/hw/bsp/esp32s2/family.mk +++ b/hw/bsp/esp32s2/family.mk @@ -21,4 +21,3 @@ UF2_FAMILY_ID = 0xbfdd4eee $(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin @echo CREATE $@ $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/hw/bsp/esp32s3/boards/CMakeLists.txt b/hw/bsp/esp32s3/boards/CMakeLists.txt index e1b921ae9..311c6e900 100644 --- a/hw/bsp/esp32s3/boards/CMakeLists.txt +++ b/hw/bsp/esp32s3/boards/CMakeLists.txt @@ -10,5 +10,5 @@ idf_component_get_property( FREERTOS_ORIG_INCLUDE_PATH freertos ORIG_INCLUDE_PAT target_include_directories(${COMPONENT_TARGET} PUBLIC "${FREERTOS_ORIG_INCLUDE_PATH}" "${TOP}/hw" - "${TOP}/src" + "${TOP}/src" ) diff --git a/hw/bsp/esp32s3/boards/esp32s3.c b/hw/bsp/esp32s3/boards/esp32s3.c index a7ca82deb..015d8305b 100644 --- a/hw/bsp/esp32s3/boards/esp32s3.c +++ b/hw/bsp/esp32s3/boards/esp32s3.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -150,4 +150,3 @@ int board_uart_write(void const * buf, int len) (void) buf; (void) len; return 0; } - diff --git a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_addax_1/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_addax_1/board.h b/hw/bsp/esp32s3/boards/espressif_addax_1/board.h index fff24ba44..d4690f732 100644 --- a/hw/bsp/esp32s3/boards/espressif_addax_1/board.h +++ b/hw/bsp/esp32s3/boards/espressif_addax_1/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h index c7940c56e..fe33b5c43 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitc/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake index 8996ff9dc..2bff4f836 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.cmake @@ -4,4 +4,4 @@ target_include_directories(${COMPONENT_LIB} PRIVATE .) target_compile_options(${COMPONENT_TARGET} PUBLIC "-DCFG_TUSB_MCU=OPT_MCU_ESP32S3" "-DCFG_TUSB_OS=OPT_OS_FREERTOS" -)
\ No newline at end of file +) diff --git a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h index c7940c56e..fe33b5c43 100644 --- a/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h +++ b/hw/bsp/esp32s3/boards/espressif_s3_devkitm/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt b/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt index 6d0fcbc86..8266c5a1c 100644 --- a/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt +++ b/hw/bsp/esp32s3/components/led_strip/CMakeLists.txt @@ -5,4 +5,3 @@ idf_component_register(SRCS "${component_srcs}" PRIV_INCLUDE_DIRS "" PRIV_REQUIRES "driver" REQUIRES "") - diff --git a/hw/bsp/esp32s3/family.cmake b/hw/bsp/esp32s3/family.cmake index 511dd58bb..0bcad035e 100644 --- a/hw/bsp/esp32s3/family.cmake +++ b/hw/bsp/esp32s3/family.cmake @@ -1,7 +1,7 @@ cmake_minimum_required(VERSION 3.5) # Add example src and bsp directories -set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") +set(EXTRA_COMPONENT_DIRS "src" "${TOP}/hw/bsp/esp32s3/boards" "${TOP}/hw/bsp/esp32s3/components") include($ENV{IDF_PATH}/tools/cmake/project.cmake) set(SUPPORTED_TARGETS esp32s3) set(FAMILY_MCUS ESP32S3) diff --git a/hw/bsp/esp32s3/family.mk b/hw/bsp/esp32s3/family.mk index cf153ffc2..d82a1c969 100644 --- a/hw/bsp/esp32s3/family.mk +++ b/hw/bsp/esp32s3/family.mk @@ -23,4 +23,3 @@ UF2_FAMILY_ID = 0xc47e5767 $(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin @echo CREATE $@ $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID) -b 0x0 -c -o $@ $^ - diff --git a/hw/bsp/f1c100s/README.md b/hw/bsp/f1c100s/README.md index 4aa1e153b..f7a863c34 100644 --- a/hw/bsp/f1c100s/README.md +++ b/hw/bsp/f1c100s/README.md @@ -17,4 +17,4 @@ Flash: `make BOARD=f1c100s flash` will write the image to SPI flash, and then re ## TODO -* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?)
\ No newline at end of file +* Add F1C100s to `#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT` high speed MCU check in examples (maybe we should extract the logic?) diff --git a/hw/bsp/f1c100s/board.h b/hw/bsp/f1c100s/board.h index 238ac796d..0ef9a1700 100644 --- a/hw/bsp/f1c100s/board.h +++ b/hw/bsp/f1c100s/board.h @@ -1 +1 @@ -// Nothing valuable here
\ No newline at end of file +// Nothing valuable here diff --git a/hw/bsp/f1c100s/board.mk b/hw/bsp/f1c100s/board.mk index 5fe26a9ea..9062483b0 100644 --- a/hw/bsp/f1c100s/board.mk +++ b/hw/bsp/f1c100s/board.mk @@ -32,7 +32,7 @@ SRC_C += \ $(MCU_DIR)/machine/sys-spi-flash.c \ $(MCU_DIR)/machine/f1c100s-intc.c \ $(MCU_DIR)/lib/malloc.c \ - $(MCU_DIR)/lib/printf.c + $(MCU_DIR)/lib/printf.c SRC_S += \ $(MCU_DIR)/machine/start.S \ @@ -47,6 +47,6 @@ INC += \ flash: flash-xfel exec: $(BUILD)/$(PROJECT).bin - xfel ddr + xfel ddr xfel write 0x80000000 $< - xfel exec 0x80000000
\ No newline at end of file + xfel exec 0x80000000 diff --git a/hw/bsp/f1c100s/f1c100s.c b/hw/bsp/f1c100s/f1c100s.c index d45072ecb..5dcae33f7 100644 --- a/hw/bsp/f1c100s/f1c100s.c +++ b/hw/bsp/f1c100s/f1c100s.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -125,6 +125,6 @@ static void timer_init(void) { f1c100s_intc_set_isr(F1C100S_IRQ_TIMER0, timer_handler); f1c100s_intc_enable_irq(F1C100S_IRQ_TIMER0); } -#else +#else static void timer_init(void) { } #endif diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 601cd54f5..08bb20bc3 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -139,4 +139,4 @@ if (NOT TARGET _family_support_marker) # save it in case of re-inclusion set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") -endif()
\ No newline at end of file +endif() diff --git a/hw/bsp/fomu/boards/fomu/board.mk b/hw/bsp/fomu/boards/fomu/board.mk index 8ced11412..b5545c89a 100644 --- a/hw/bsp/fomu/boards/fomu/board.mk +++ b/hw/bsp/fomu/boards/fomu/board.mk @@ -1 +1 @@ -# place holder
\ No newline at end of file +# place holder diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c index 33c630303..e079e7c5b 100644 --- a/hw/bsp/fomu/fomu.c +++ b/hw/bsp/fomu/fomu.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/fomu/include/hw/common.h b/hw/bsp/fomu/include/hw/common.h index 6a97ca2e9..b902bc4f2 100644 --- a/hw/bsp/fomu/include/hw/common.h +++ b/hw/bsp/fomu/include/hw/common.h @@ -30,4 +30,4 @@ static inline uint32_t csr_readl(uint32_t addr) { return *(volatile uint32_t *)addr; } -#endif /* _HW_COMMON_H_ */
\ No newline at end of file +#endif /* _HW_COMMON_H_ */ diff --git a/hw/bsp/fomu/include/irq.h b/hw/bsp/fomu/include/irq.h index a82218907..dc96c228d 100644 --- a/hw/bsp/fomu/include/irq.h +++ b/hw/bsp/fomu/include/irq.h @@ -68,4 +68,4 @@ static inline unsigned int irq_pending(void) } #endif -#endif /* __IRQ_H */
\ No newline at end of file +#endif /* __IRQ_H */ diff --git a/hw/bsp/frdm_k32l2b/board.h b/hw/bsp/frdm_k32l2b/board.h index 825367915..8d21fdcd4 100644 --- a/hw/bsp/frdm_k32l2b/board.h +++ b/hw/bsp/frdm_k32l2b/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/frdm_k32l2b/frdm_k32l2b.c index 924bb18e9..8d2b39500 100644 --- a/hw/bsp/frdm_k32l2b/frdm_k32l2b.c +++ b/hw/bsp/frdm_k32l2b/frdm_k32l2b.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -56,10 +56,10 @@ void board_init(void) gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, kPORT_MuxAsGpio }; PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); @@ -68,7 +68,7 @@ void board_init(void) PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); /* PORTA2 (pin 24) is configured as LPUART0_TX */ PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); - + SIM->SOPT5 = ((SIM->SOPT5 & /* Mask bits to zero which are setting */ (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) diff --git a/hw/bsp/frdm_kl25z/frdm_kl25z.c b/hw/bsp/frdm_kl25z/frdm_kl25z.c index 8d93fdbaa..46f85f6a5 100644 --- a/hw/bsp/frdm_kl25z/frdm_kl25z.c +++ b/hw/bsp/frdm_kl25z/frdm_kl25z.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -103,7 +103,7 @@ void board_init(void) // Button CLOCK_EnableClock(BUTTON_PIN_CLOCK); port_pin_config_t button_port = { - .pullSelect = kPORT_PullUp, + .pullSelect = kPORT_PullUp, .mux = BUTTON_PIN_FUNCTION, }; PORT_SetPinConfig(BUTTON_PIN_PORT, BUTTON_PIN, &button_port); diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 60a326d27..113c4c304 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -44,7 +44,7 @@ void USBFS_IRQHandler(void) { tud_int_handler(0); } // According to GD32VF103 user manual clock tree: // Systick clock = AHB clock / 4. -#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) +#define TIMER_TICKS ((SystemCoreClock / 4) / 1000) #define BUTTON_PORT GPIOA #define BUTTON_PIN GPIO_PIN_0 diff --git a/hw/bsp/gd32vf103/system_gd32vf103.c b/hw/bsp/gd32vf103/system_gd32vf103.c index c2001a980..200852abf 100644 --- a/hw/bsp/gd32vf103/system_gd32vf103.c +++ b/hw/bsp/gd32vf103/system_gd32vf103.c @@ -95,7 +95,7 @@ void SystemInit(void) /* reset the RCC clock configuration to the default reset state */ /* enable IRC8M */ RCU_CTL |= RCU_CTL_IRC8MEN; - + /* reset SCS, AHBPSC, APB1PSC, APB2PSC, ADCPSC, CKOUT0SEL bits */ RCU_CFG0 &= ~(RCU_CFG0_SCS | RCU_CFG0_AHBPSC | RCU_CFG0_APB1PSC | RCU_CFG0_APB2PSC | RCU_CFG0_ADCPSC | RCU_CFG0_ADCPSC_2 | RCU_CFG0_CKOUT0SEL); @@ -107,7 +107,7 @@ void SystemInit(void) RCU_CTL &= ~(RCU_CTL_HXTALBPS); /* reset PLLSEL, PREDV0_LSB, PLLMF, USBFSPSC bits */ - + RCU_CFG0 &= ~(RCU_CFG0_PLLSEL | RCU_CFG0_PREDV0_LSB | RCU_CFG0_PLLMF | RCU_CFG0_USBFSPSC | RCU_CFG0_PLLMF_4); RCU_CFG1 = 0x00000000U; @@ -141,12 +141,12 @@ void SystemCoreClockUpdate(void) case SEL_IRC8M: SystemCoreClock = IRC8M_VALUE; break; - + /* HXTAL is selected as CK_SYS */ case SEL_HXTAL: SystemCoreClock = HXTAL_VALUE; break; - + /* PLL is selected as CK_SYS */ case SEL_PLL: /* PLL clock source selection, HXTAL or IRC8M/2 */ @@ -313,7 +313,7 @@ static void system_clock_72m_hxtal(void) /* APB1 = AHB/2 */ RCU_CFG0 |= RCU_APB1_CKAHB_DIV2; - /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ + /* CK_PLL = (CK_PREDIV0) * 18 = 72 MHz */ RCU_CFG0 &= ~(RCU_CFG0_PLLMF | RCU_CFG0_PLLMF_4); RCU_CFG0 |= (RCU_PLLSRC_HXTAL | RCU_PLL_MUL18); diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.h b/hw/bsp/imxrt/boards/metro_m7_1011/board.h index 7fa2f8541..3c172ebb9 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/board.h +++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld index 30dd84373..960fc6891 100644 --- a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld +++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.ld @@ -35,7 +35,7 @@ MEMORY { m_flash_config (RX) : ORIGIN = 0x60000400, LENGTH = 0x00000C00 m_ivt (RX) : ORIGIN = 0x60001000, LENGTH = 0x00001000 - + m_interrupts (RX) : ORIGIN = 0x6000C000, LENGTH = 0x00000400 m_text (RX) : ORIGIN = 0x6000C400, LENGTH = (8*1024*1024 - 0xC400) m_qacode (RX) : ORIGIN = 0x00000000, LENGTH = 0x00008000 diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h index 4f21b52fa..926f45618 100644 --- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h index 932ce7fd7..10d9fad07 100644 --- a/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h index 56ed5855b..284bb08e7 100644 --- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h index 152c9ab18..9100072e2 100644 --- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h index 0472f608c..beb69bf2b 100644 --- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h index 7fa37e33f..0f45f72e1 100644 --- a/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h index 5f51e91a2..37ad94eef 100644 --- a/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h +++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_40/board.h b/hw/bsp/imxrt/boards/teensy_40/board.h index b3cc0a8c5..cac773442 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.h +++ b/hw/bsp/imxrt/boards/teensy_40/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_40/board.mk b/hw/bsp/imxrt/boards/teensy_40/board.mk index 0ad5ea5c0..45ca0fb6e 100644 --- a/hw/bsp/imxrt/boards/teensy_40/board.mk +++ b/hw/bsp/imxrt/boards/teensy_40/board.mk @@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062 JLINK_DEVICE = MIMXRT1062xxx6A # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH +# Make sure it is in your PATH flash: $(BUILD)/$(PROJECT).hex teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/boards/teensy_41/board.h b/hw/bsp/imxrt/boards/teensy_41/board.h index b0b4931c7..72c18f540 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.h +++ b/hw/bsp/imxrt/boards/teensy_41/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/imxrt/boards/teensy_41/board.mk b/hw/bsp/imxrt/boards/teensy_41/board.mk index 0ad5ea5c0..45ca0fb6e 100644 --- a/hw/bsp/imxrt/boards/teensy_41/board.mk +++ b/hw/bsp/imxrt/boards/teensy_41/board.mk @@ -5,6 +5,6 @@ MCU_VARIANT = MIMXRT1062 JLINK_DEVICE = MIMXRT1062xxx6A # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli -# Make sure it is in your PATH +# Make sure it is in your PATH flash: $(BUILD)/$(PROJECT).hex teensy_loader_cli --mcu=imxrt1062 -v -w $< diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c index e28a6174a..5eb672c24 100644 --- a/hw/bsp/imxrt/family.c +++ b/hw/bsp/imxrt/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld index 5420ffc00..f478a99c7 100644 --- a/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld +++ b/hw/bsp/kuiic/K32L2B31xxxxA_flash.ld @@ -214,4 +214,3 @@ SECTIONS ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") } - diff --git a/hw/bsp/kuiic/board.h b/hw/bsp/kuiic/board.h index 78ad83a2e..1e2d4f18b 100644 --- a/hw/bsp/kuiic/board.h +++ b/hw/bsp/kuiic/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, Ha Thach (tinyusb.org) diff --git a/hw/bsp/kuiic/kuiic.c b/hw/bsp/kuiic/kuiic.c index 7aaa9e03c..97677d47a 100644 --- a/hw/bsp/kuiic/kuiic.c +++ b/hw/bsp/kuiic/kuiic.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) @@ -96,10 +96,10 @@ void board_init(void) CLOCK_EnableClock(kCLOCK_PortD); CLOCK_EnableClock(kCLOCK_PortE); - + gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 1 }; GPIO_PinInit(GPIOA, 1U, &led_config); - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); + PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); led_config.outputLogic = 0; GPIO_PinInit(GPIOA, 2U, &led_config); PORT_SetPinMux(PORTA, 2U, kPORT_MuxAsGpio); @@ -108,10 +108,10 @@ void board_init(void) gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, + kPORT_LowDriveStrength, kPORT_MuxAsGpio }; PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); @@ -121,7 +121,7 @@ void board_init(void) PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); /* PORTA2 (pin 24) is configured as LPUART0_TX */ PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); - + SIM->SOPT5 = ((SIM->SOPT5 & /* Mask bits to zero which are setting */ (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) diff --git a/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld b/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld index 6dd12ade1..d8079717e 100644 --- a/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld +++ b/hw/bsp/lpc15/boards/lpcxpresso1549/lpc1549.ld @@ -13,29 +13,29 @@ MEMORY { /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ - Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ - Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_16 (rwx) : ORIGIN = 0x2000000, LENGTH = 0x4000 /* 16K bytes (alias RAM) */ + Ram1_16 (rwx) : ORIGIN = 0x2004000, LENGTH = 0x4000 /* 16K bytes (alias RAM2) */ + Ram2_4 (rwx) : ORIGIN = 0x2008000, LENGTH = 0x1000 /* 4K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ - __base_RAM = 0x2000000 ; /* RAM */ - __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ - __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ - __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ - __base_RAM2 = 0x2004000 ; /* RAM2 */ - __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ - __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ - __base_RAM3 = 0x2008000 ; /* RAM3 */ - __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ - __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_16 = 0x2000000 ; /* Ram0_16 */ + __base_RAM = 0x2000000 ; /* RAM */ + __top_Ram0_16 = 0x2000000 + 0x4000 ; /* 16K bytes */ + __top_RAM = 0x2000000 + 0x4000 ; /* 16K bytes */ + __base_Ram1_16 = 0x2004000 ; /* Ram1_16 */ + __base_RAM2 = 0x2004000 ; /* RAM2 */ + __top_Ram1_16 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __top_RAM2 = 0x2004000 + 0x4000 ; /* 16K bytes */ + __base_Ram2_4 = 0x2008000 ; /* Ram2_4 */ + __base_RAM3 = 0x2008000 ; /* RAM3 */ + __top_Ram2_4 = 0x2008000 + 0x1000 ; /* 4K bytes */ + __top_RAM3 = 0x2008000 + 0x1000 ; /* 4K bytes */ ENTRY(ResetISR) @@ -84,9 +84,9 @@ SECTIONS } > MFlash256 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash256 @@ -98,9 +98,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > MFlash256 __exidx_end = .; - + _etext = .; - + /* DATA section for Ram1_16 */ .data_RAM2 : ALIGN(4) @@ -225,11 +225,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_16 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -243,4 +243,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/lpc15/family.c b/hw/bsp/lpc15/family.c index 7f5984a3e..30a3e51e1 100644 --- a/hw/bsp/lpc15/family.c +++ b/hw/bsp/lpc15/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld index 51fd1539d..f12c1760c 100644 --- a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -12,43 +12,43 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -137,9 +137,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) __exidx_end = .; } > MFlashA512 - + _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -377,17 +377,17 @@ SECTIONS . = ALIGN(4) ; _end_noinit = .; PROVIDE(__end_noinit_RAM = .) ; - PROVIDE(__end_noinit_RamLoc32 = .) ; + PROVIDE(__end_noinit_RamLoc32 = .) ; } > RamLoc32 AT> RamLoc32 PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -401,4 +401,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 9a308e342..9a67e8946 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -11,44 +11,44 @@ MEMORY { /* Define each memory region */ - MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } /* Define a symbol for the top of each memory region */ -__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ -__base_Flash = 0x1a000000 ; /* Flash */ -__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ -__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ -__base_Flash2 = 0x1b000000 ; /* Flash2 */ -__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ -__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ -__base_RAM = 0x10000000 ; /* RAM */ -__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ -__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ -__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ -__base_RAM2 = 0x10080000 ; /* RAM2 */ -__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ -__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ -__base_RAM3 = 0x20000000 ; /* RAM3 */ -__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ -__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ -__base_RAM4 = 0x20008000 ; /* RAM4 */ -__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ -__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ -__base_RAM5 = 0x2000c000 ; /* RAM5 */ -__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ -__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) @@ -118,9 +118,9 @@ SECTIONS } > MFlashA512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlashA512 @@ -134,7 +134,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamLoc40 */ .data_RAM2 : ALIGN(4) @@ -215,7 +215,7 @@ SECTIONS *(.bss.$RamLoc40*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 + } > RamLoc40 /* BSS section for RamAHB32 */ .bss_RAM3 : ALIGN(4) @@ -225,7 +225,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 + } > RamAHB32 /* BSS section for RamAHB16 */ .bss_RAM4 : ALIGN(4) @@ -235,7 +235,7 @@ SECTIONS *(.bss.$RamAHB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 + } > RamAHB16 /* BSS section for RamAHB_ETB16 */ .bss_RAM5 : ALIGN(4) @@ -245,7 +245,7 @@ SECTIONS *(.bss.$RamAHB_ETB16*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -264,7 +264,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamLoc40*) . = ALIGN(4) ; - } > RamLoc40 + } > RamLoc40 /* NOINIT section for RamAHB32 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -272,7 +272,7 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* NOINIT section for RamAHB16 */ .noinit_RAM4 (NOLOAD) : ALIGN(4) @@ -280,7 +280,7 @@ SECTIONS *(.noinit.$RAM4*) *(.noinit.$RamAHB16*) . = ALIGN(4) ; - } > RamAHB16 + } > RamAHB16 /* NOINIT section for RamAHB_ETB16 */ .noinit_RAM5 (NOLOAD) : ALIGN(4) @@ -288,13 +288,13 @@ SECTIONS *(.noinit.$RAM5*) *(.noinit.$RamAHB_ETB16*) . = ALIGN(4) ; - } > RamAHB_ETB16 + } > RamAHB_ETB16 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -302,11 +302,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -320,4 +320,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 72c20e034..57f9d55da 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk index 925374cc8..5f15e2bbe 100644 --- a/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk +++ b/hw/bsp/lpc54/boards/lpcxpresso54628/board.mk @@ -15,4 +15,4 @@ PYOCD_TARGET = LPC54628 #flash: flash-pyocd -flash: flash-jlink
\ No newline at end of file +flash: flash-jlink diff --git a/hw/bsp/lpc54/family.c b/hw/bsp/lpc54/family.c index 621788948..fe9cfcc47 100644 --- a/hw/bsp/lpc54/family.c +++ b/hw/bsp/lpc54/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld b/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld index 6b5d852aa..e2197b972 100644 --- a/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld +++ b/hw/bsp/lpc55/boards/double_m33_express/LPC55S69_cm33_core0_uf2.ld @@ -231,4 +231,3 @@ SECTIONS ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") } - diff --git a/hw/bsp/lpc55/family.c b/hw/bsp/lpc55/family.c index 5b6c56dd3..3ed00e7da 100644 --- a/hw/bsp/lpc55/family.c +++ b/hw/bsp/lpc55/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso11u37/lpc11u37.ld b/hw/bsp/lpcxpresso11u37/lpc11u37.ld index 6a2dfb7f5..8e0a4e4c6 100644 --- a/hw/bsp/lpcxpresso11u37/lpc11u37.ld +++ b/hw/bsp/lpcxpresso11u37/lpc11u37.ld @@ -12,24 +12,24 @@ MEMORY { /* Define each memory region */ - MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + MFlash128 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash128 = 0x0 ; /* MFlash128 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ - __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_MFlash128 = 0x0 ; /* MFlash128 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash128 = 0x0 + 0x20000 ; /* 128K bytes */ + __top_Flash = 0x0 + 0x20000 ; /* 128K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -74,9 +74,9 @@ SECTIONS } > MFlash128 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash128 @@ -88,9 +88,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > MFlash128 __exidx_end = .; - + _etext = .; - + /* DATA section for RamUsb2 */ .data_RAM2 : ALIGN(4) @@ -176,11 +176,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) ) ); @@ -192,4 +192,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c b/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c index 11f1797a2..79cd685c3 100644 --- a/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c +++ b/hw/bsp/lpcxpresso11u37/lpcxpresso11u37.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso11u68/lpc11u68.ld b/hw/bsp/lpcxpresso11u68/lpc11u68.ld index 56d9e4b89..4a35b192e 100644 --- a/hw/bsp/lpcxpresso11u68/lpc11u68.ld +++ b/hw/bsp/lpcxpresso11u68/lpc11u68.ld @@ -11,29 +11,29 @@ MEMORY { /* Define each memory region */ - MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ - Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ + MFlash256 (rx) : ORIGIN = 0x0, LENGTH = 0x40000 /* 256K bytes (alias Flash) */ + Ram0_32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + Ram1_2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + Ram2USB_2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash256 = 0x0 ; /* MFlash256 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ - __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ - __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ - __base_RAM2 = 0x20000000 ; /* RAM2 */ - __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ - __base_RAM3 = 0x20004000 ; /* RAM3 */ - __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_MFlash256 = 0x0 ; /* MFlash256 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash256 = 0x0 + 0x40000 ; /* 256K bytes */ + __top_Flash = 0x0 + 0x40000 ; /* 256K bytes */ + __base_Ram0_32 = 0x10000000 ; /* Ram0_32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_Ram0_32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_Ram1_2 = 0x20000000 ; /* Ram1_2 */ + __base_RAM2 = 0x20000000 ; /* RAM2 */ + __top_Ram1_2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_Ram2USB_2 = 0x20004000 ; /* Ram2USB_2 */ + __base_RAM3 = 0x20004000 ; /* RAM3 */ + __top_Ram2USB_2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20004000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -82,9 +82,9 @@ SECTIONS } > MFlash256 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash256 @@ -98,7 +98,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* possible MTB section for Ram1_2 */ .mtb_buffer_RAM2 (NOLOAD) : { @@ -172,7 +172,7 @@ SECTIONS *(.bss.$Ram1_2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > Ram1_2 + } > Ram1_2 /* BSS section for Ram2USB_2 */ .bss_RAM3 : ALIGN(4) @@ -182,7 +182,7 @@ SECTIONS *(.bss.$Ram2USB_2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > Ram2USB_2 + } > Ram2USB_2 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -201,7 +201,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$Ram1_2*) . = ALIGN(4) ; - } > Ram1_2 + } > Ram1_2 /* NOINIT section for Ram2USB_2 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -209,13 +209,13 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$Ram2USB_2*) . = ALIGN(4) ; - } > Ram2USB_2 + } > Ram2USB_2 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > Ram0_32 @@ -223,11 +223,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_Ram0_32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) - + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (( DEFINED(NMI_Handler) ? NMI_Handler : M0_NMI_Handler ) + 1) + + (( DEFINED(HardFault_Handler) ? HardFault_Handler : M0_HardFault_Handler ) + 1) ) ); @@ -239,4 +239,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c b/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c index e33a5c6e5..a04e43867 100644 --- a/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c +++ b/hw/bsp/lpcxpresso11u68/lpcxpresso11u68.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso1347/lpc1347.ld b/hw/bsp/lpcxpresso1347/lpc1347.ld index 42a4bb25c..a2111cd1c 100644 --- a/hw/bsp/lpcxpresso1347/lpc1347.ld +++ b/hw/bsp/lpcxpresso1347/lpc1347.ld @@ -11,29 +11,29 @@ MEMORY { /* Define each memory region */ - MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ - RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ - RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ - RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ + MFlash64 (rx) : ORIGIN = 0x0, LENGTH = 0x10000 /* 64K bytes (alias Flash) */ + RamLoc8 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x2000 /* 8K bytes (alias RAM) */ + RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2K bytes (alias RAM2) */ + RamPeriph2 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2K bytes (alias RAM3) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash64 = 0x0 ; /* MFlash64 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ - __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ - __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ - __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ - __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ - __base_RAM2 = 0x20004000 ; /* RAM2 */ - __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ - __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ - __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ + __base_MFlash64 = 0x0 ; /* MFlash64 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash64 = 0x0 + 0x10000 ; /* 64K bytes */ + __top_Flash = 0x0 + 0x10000 ; /* 64K bytes */ + __base_RamLoc8 = 0x10000000 ; /* RamLoc8 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc8 = 0x10000000 + 0x2000 ; /* 8K bytes */ + __top_RAM = 0x10000000 + 0x2000 ; /* 8K bytes */ + __base_RamUsb2 = 0x20004000 ; /* RamUsb2 */ + __base_RAM2 = 0x20004000 ; /* RAM2 */ + __top_RamUsb2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __top_RAM2 = 0x20004000 + 0x800 ; /* 2K bytes */ + __base_RamPeriph2 = 0x20000000 ; /* RamPeriph2 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamPeriph2 = 0x20000000 + 0x800 ; /* 2K bytes */ + __top_RAM3 = 0x20000000 + 0x800 ; /* 2K bytes */ ENTRY(ResetISR) @@ -82,9 +82,9 @@ SECTIONS } > MFlash64 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash64 @@ -98,7 +98,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamUsb2 */ .data_RAM2 : ALIGN(4) @@ -153,7 +153,7 @@ SECTIONS *(.bss.$RamUsb2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamUsb2 + } > RamUsb2 /* BSS section for RamPeriph2 */ .bss_RAM3 : ALIGN(4) @@ -163,7 +163,7 @@ SECTIONS *(.bss.$RamPeriph2*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM3 = .) ; - } > RamPeriph2 + } > RamPeriph2 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -182,7 +182,7 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamUsb2*) . = ALIGN(4) ; - } > RamUsb2 + } > RamUsb2 /* NOINIT section for RamPeriph2 */ .noinit_RAM3 (NOLOAD) : ALIGN(4) @@ -190,13 +190,13 @@ SECTIONS *(.noinit.$RAM3*) *(.noinit.$RamPeriph2*) . = ALIGN(4) ; - } > RamPeriph2 + } > RamPeriph2 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc8 @@ -204,11 +204,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc8 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -222,4 +222,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c b/hw/bsp/lpcxpresso1347/lpcxpresso1347.c index a9a67ae3a..8ee611037 100644 --- a/hw/bsp/lpcxpresso1347/lpcxpresso1347.c +++ b/hw/bsp/lpcxpresso1347/lpcxpresso1347.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -64,7 +64,7 @@ const uint32_t ExtRateIn = 0; /* Pin muxing table, only items that need changing from their default pin state are in this table. */ -static const PINMUX_GRP_T pinmuxing[] = +static const PINMUX_GRP_T pinmuxing[] = { {0, 1, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_INACT)}, /* PIO0_1 used for CLKOUT */ {0, 2, (IOCON_FUNC1 | IOCON_RESERVED_BIT_7 | IOCON_MODE_PULLUP)}, /* PIO0_2 used for SSEL */ diff --git a/hw/bsp/lpcxpresso1769/lpc1769.ld b/hw/bsp/lpcxpresso1769/lpc1769.ld index d1c83d8e2..095bd3d92 100644 --- a/hw/bsp/lpcxpresso1769/lpc1769.ld +++ b/hw/bsp/lpcxpresso1769/lpc1769.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamAHB32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 + } > RamAHB32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c index b7bce93d2..24333ad1a 100644 --- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c +++ b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c b/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c index 6bade7743..c94b0d6d8 100644 --- a/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c +++ b/hw/bsp/lpcxpresso51u68/lpcxpresso51u68.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2018, hathach (tinyusb.org) diff --git a/hw/bsp/mbed1768/lpc1768.ld b/hw/bsp/mbed1768/lpc1768.ld index d1c83d8e2..095bd3d92 100644 --- a/hw/bsp/mbed1768/lpc1768.ld +++ b/hw/bsp/mbed1768/lpc1768.ld @@ -11,24 +11,24 @@ MEMORY { /* Define each memory region */ - MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ - RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ - RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ + MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32K bytes (alias RAM2) */ } /* Define a symbol for the top of each memory region */ - __base_MFlash512 = 0x0 ; /* MFlash512 */ - __base_Flash = 0x0 ; /* Flash */ - __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ - __base_RAM2 = 0x2007c000 ; /* RAM2 */ - __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ - __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __base_MFlash512 = 0x0 ; /* MFlash512 */ + __base_Flash = 0x0 ; /* Flash */ + __top_MFlash512 = 0x0 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x0 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB32 = 0x2007c000 ; /* RamAHB32 */ + __base_RAM2 = 0x2007c000 ; /* RAM2 */ + __top_RamAHB32 = 0x2007c000 + 0x8000 ; /* 32K bytes */ + __top_RAM2 = 0x2007c000 + 0x8000 ; /* 32K bytes */ ENTRY(ResetISR) @@ -72,9 +72,9 @@ SECTIONS } > MFlash512 /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > MFlash512 @@ -88,7 +88,7 @@ SECTIONS __exidx_end = .; _etext = .; - + /* DATA section for RamAHB32 */ .data_RAM2 : ALIGN(4) @@ -130,7 +130,7 @@ SECTIONS *(.bss.$RamAHB32*) . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ PROVIDE(__end_bss_RAM2 = .) ; - } > RamAHB32 + } > RamAHB32 /* MAIN BSS SECTION */ .bss : ALIGN(4) @@ -149,13 +149,13 @@ SECTIONS *(.noinit.$RAM2*) *(.noinit.$RamAHB32*) . = ALIGN(4) ; - } > RamAHB32 + } > RamAHB32 /* DEFAULT NOINIT SECTION */ .noinit (NOLOAD): ALIGN(4) { _noinit = .; - *(.noinit*) + *(.noinit*) . = ALIGN(4) ; _end_noinit = .; } > RamLoc32 @@ -163,11 +163,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -181,4 +181,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c index 08cf3adbd..9f3d294d3 100644 --- a/hw/bsp/mbed1768/mbed1768.c +++ b/hw/bsp/mbed1768/mbed1768.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld index 0b45ee7bd..796ed04f6 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/flash.ld @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 MM32 SE TEAM @@ -110,7 +110,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -121,7 +121,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -149,7 +149,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c index 9793ba241..c3f5bc16d 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020 MM32 SE TEAM @@ -57,7 +57,7 @@ const int baudrate = 115200; void board_init (void) { -// usb clock +// usb clock USB_DeviceClockInit(); if ( SysTick_Config(SystemCoreClock / 1000) ) diff --git a/hw/bsp/ngx4330/ngx4330.c b/hw/bsp/ngx4330/ngx4330.c index 4fc314165..d61f775c7 100644 --- a/hw/bsp/ngx4330/ngx4330.c +++ b/hw/bsp/ngx4330/ngx4330.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/ngx4330/ngx4330.ld b/hw/bsp/ngx4330/ngx4330.ld index 7bd363f08..300869c20 100644 --- a/hw/bsp/ngx4330/ngx4330.ld +++ b/hw/bsp/ngx4330/ngx4330.ld @@ -12,39 +12,39 @@ MEMORY { /* Define each memory region */ - RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ - RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ - RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ - RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ - RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ - SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ + RamLoc128 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x20000 /* 128K bytes (alias RAM) */ + RamLoc72 (rwx) : ORIGIN = 0x10080000, LENGTH = 0x12000 /* 72K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ + SPIFI (rx) : ORIGIN = 0x14000000, LENGTH = 0x400000 /* 4M bytes (alias Flash) */ } /* Define a symbol for the top of each memory region */ - __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ - __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ - __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __base_SPIFI = 0x14000000 ; /* SPIFI */ - __base_Flash = 0x14000000 ; /* Flash */ - __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ - __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ + __base_RamLoc128 = 0x10000000 ; /* RamLoc128 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc128 = 0x10000000 + 0x20000 ; /* 128K bytes */ + __top_RAM = 0x10000000 + 0x20000 ; /* 128K bytes */ + __base_RamLoc72 = 0x10080000 ; /* RamLoc72 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc72 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __top_RAM2 = 0x10080000 + 0x12000 ; /* 72K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __base_SPIFI = 0x14000000 ; /* SPIFI */ + __base_Flash = 0x14000000 ; /* Flash */ + __top_SPIFI = 0x14000000 + 0x400000 ; /* 4M bytes */ + __top_Flash = 0x14000000 + 0x400000 ; /* 4M bytes */ ENTRY(ResetISR) @@ -103,9 +103,9 @@ SECTIONS } > SPIFI /* * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. + * with C++ and STDC++) use this. */ - .ARM.extab : ALIGN(4) + .ARM.extab : ALIGN(4) { *(.ARM.extab* .gnu.linkonce.armextab.*) } > SPIFI @@ -117,9 +117,9 @@ SECTIONS *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > SPIFI __exidx_end = .; - + _etext = .; - + /* DATA section for RamLoc72 */ .data_RAM2 : ALIGN(4) @@ -322,11 +322,11 @@ SECTIONS PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc128 - 0); /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ @@ -340,4 +340,4 @@ SECTIONS _image_start = LOADADDR(.text); _image_end = LOADADDR(.data) + SIZEOF(.data); _image_size = _image_end - _image_start; -}
\ No newline at end of file +} diff --git a/hw/bsp/nrf/boards/adafruit_clue/board.h b/hw/bsp/nrf/boards/adafruit_clue/board.h index 2c58e8fe8..8d6df786e 100644 --- a/hw/bsp/nrf/boards/adafruit_clue/board.h +++ b/hw/bsp/nrf/boards/adafruit_clue/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100755 --- a/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/adafruit_clue/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld b/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld index f570740b6..f609f743f 100755 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/arduino_nano33_ble.ld @@ -20,7 +20,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h index d548e01c3..00fa8d8ea 100644 --- a/hw/bsp/nrf/boards/arduino_nano33_ble/board.h +++ b/hw/bsp/nrf/boards/arduino_nano33_ble/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h index a86c9dc7f..3dd354efa 100644 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100755 --- a/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/circuitplayground_bluefruit/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h index 3208a948a..8e6ce3230 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/feather_nrf52840_express/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h index ece6e34cb..605deea24 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/feather_nrf52840_sense/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h index 132173a80..33c370f53 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld b/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld index 5314a4e93..71c55bb81 100644 --- a/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld +++ b/hw/bsp/nrf/boards/itsybitsy_nrf52840/nrf52840_s140_v6.ld @@ -13,7 +13,7 @@ MEMORY * - Max ATT MTU * - Concurrent connection peripheral + central + secure links * - Event Len, HVN queue, Write CMD queue - */ + */ RAM (rwx) : ORIGIN = 0x20003400, LENGTH = 0x20040000 - 0x20003400 } @@ -26,7 +26,7 @@ SECTIONS KEEP(*(.svc_data)) PROVIDE(__stop_svc_data = .); } > RAM - + .fs_data : { PROVIDE(__start_fs_data = .); diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h index 01dd1f24f..072cb2714 100644 --- a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk index 3afa234aa..f25ec8f34 100644 --- a/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk +++ b/hw/bsp/nrf/boards/nrf52840_mdk_dongle/board.mk @@ -12,4 +12,4 @@ $(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex flash: $(BUILD)/$(PROJECT).zip @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) - $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200
\ No newline at end of file + $(NRFUTIL) dfu usb-serial --package $^ -p $(SERIAL) -b 115200 diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h index ab12d21aa..50d3067b3 100644 --- a/hw/bsp/nrf/boards/pca10056/board.h +++ b/hw/bsp/nrf/boards/pca10056/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/pca10059/board.h b/hw/bsp/nrf/boards/pca10059/board.h index 0810be648..ea3f4030d 100644 --- a/hw/bsp/nrf/boards/pca10059/board.h +++ b/hw/bsp/nrf/boards/pca10059/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/pca10100/board.h b/hw/bsp/nrf/boards/pca10100/board.h index 881133035..2b2579732 100644 --- a/hw/bsp/nrf/boards/pca10100/board.h +++ b/hw/bsp/nrf/boards/pca10100/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h index dcf829d9c..bc203f073 100644 --- a/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h +++ b/hw/bsp/nrf/boards/raytac_mdbt50q_rx/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c index a07332d4c..02cec31ef 100644 --- a/hw/bsp/nrf/family.c +++ b/hw/bsp/nrf/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld b/hw/bsp/nutiny_nuc121s/nuc121_flash.ld index 3966b276e..0c599a561 100644 --- a/hw/bsp/nutiny_nuc121s/nuc121_flash.ld +++ b/hw/bsp/nutiny_nuc121s/nuc121_flash.ld @@ -69,7 +69,7 @@ SECTIONS *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) - + *(.rodata*) KEEP(*(.eh_frame*)) diff --git a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c index 7117a3422..ec66f8deb 100644 --- a/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c +++ b/hw/bsp/nutiny_nuc121s/nutiny_nuc121.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld b/hw/bsp/nutiny_nuc125s/nuc125_flash.ld index 3966b276e..0c599a561 100644 --- a/hw/bsp/nutiny_nuc125s/nuc125_flash.ld +++ b/hw/bsp/nutiny_nuc125s/nuc125_flash.ld @@ -69,7 +69,7 @@ SECTIONS *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) *(SORT(.dtors.*)) *(.dtors) - + *(.rodata*) KEEP(*(.eh_frame*)) diff --git a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c index 7117a3422..ec66f8deb 100644 --- a/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c +++ b/hw/bsp/nutiny_nuc125s/nutiny_nuc125.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c index da62e7bd2..90fa2ffd8 100644 --- a/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c +++ b/hw/bsp/nutiny_nuc126v/nutiny_nuc126.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c index 0d78116b8..9e7eacb23 100644 --- a/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c +++ b/hw/bsp/nutiny_sdk_nuc120/nutiny_sdk_nuc120.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c index 49e66d2d0..1fc97e3dc 100644 --- a/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c +++ b/hw/bsp/nutiny_sdk_nuc505/nutiny_sdk_nuc505.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c index e47ec5f31..0bb6cb728 100644 --- a/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c +++ b/hw/bsp/pic32mz/boards/olimex_emz64/olimex_emz64.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/pic32mz/family.c b/hw/bsp/pic32mz/family.c index 786f04978..895e23899 100644 --- a/hw/bsp/pic32mz/family.c +++ b/hw/bsp/pic32mz/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h index e7eab088e..1eeeaf9af 100644 --- a/hw/bsp/rp2040/board.h +++ b/hw/bsp/rp2040/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake index 8280c835d..f9887c09c 100644 --- a/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake +++ b/hw/bsp/rp2040/boards/raspberry_pi_pico/board.cmake @@ -1 +1 @@ -set(PICO_BOARD pico)
\ No newline at end of file +set(PICO_BOARD pico) diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake index 678bce274..5d80ab66e 100644 --- a/hw/bsp/rp2040/family.cmake +++ b/hw/bsp/rp2040/family.cmake @@ -55,7 +55,7 @@ if (NOT TARGET _rp2040_family_inclusion_marker) message("Compiling TinyUSB with CFG_TUSB_DEBUG=1") set(TINYUSB_DEBUG_LEVEL 1) endif() - + target_compile_definitions(tinyusb_common_base INTERFACE CFG_TUSB_MCU=OPT_MCU_RP2040 CFG_TUSB_OS=${TINYUSB_OPT_OS} diff --git a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c index 9bd9399f6..4f87153ac 100644 --- a/hw/bsp/rx/boards/gr_citrus/gr_citrus.c +++ b/hw/bsp/rx/boards/gr_citrus/gr_citrus.c @@ -33,9 +33,9 @@ * - Short EMLE pad and 3.3V(GR-CITRUS pin name) with a wire. * * The pads are [the back side of GR-CITRUS](https://www.slideshare.net/MinaoYamamoto/grcitrusrx631/2). - * + * * Connect the pins between GR-CITRUS and JLink as follows. - * + * * | Function | GR-CITRUS pin | JLink pin No.| note | * |:---------:|:-------------:|:------------:|:--------:| * | VTref | 3.3V | 1 | | @@ -91,7 +91,7 @@ void INT_Excep_SCI0_TXI0(void) { uint8_t *buf = sci0_buf[0].buf; uint32_t cnt = sci0_buf[0].cnt; - + if (!buf || !cnt) { SCI0.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); return; diff --git a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c index 3c729ad50..691038fc8 100644 --- a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c +++ b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c @@ -126,7 +126,7 @@ void INT_Excep_SCI5_TXI5(void) { uint8_t *buf = sci_buf[0].buf; uint32_t cnt = sci_buf[0].cnt; - + if (!buf || !cnt) { SCI5.SCR.BYTE &= ~(SCI_SCR_TEIE | SCI_SCR_TE | SCI_SCR_TIE); return; diff --git a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld index 8b3124c0e..9e12acec8 100644 --- a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld +++ b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/samd21/boards/atsamd21_xpro/board.h b/hw/bsp/samd21/boards/atsamd21_xpro/board.h index a3e03997c..315e40c78 100644 --- a/hw/bsp/samd21/boards/atsamd21_xpro/board.h +++ b/hw/bsp/samd21/boards/atsamd21_xpro/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/circuitplayground_express/board.h b/hw/bsp/samd21/boards/circuitplayground_express/board.h index 2d7da1c0b..0037db00d 100644 --- a/hw/bsp/samd21/boards/circuitplayground_express/board.h +++ b/hw/bsp/samd21/boards/circuitplayground_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/curiosity_nano/board.h b/hw/bsp/samd21/boards/curiosity_nano/board.h index 67924d809..1a4a833a3 100644 --- a/hw/bsp/samd21/boards/curiosity_nano/board.h +++ b/hw/bsp/samd21/boards/curiosity_nano/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/feather_m0_express/board.h b/hw/bsp/samd21/boards/feather_m0_express/board.h index b9292b9af..8e0caa6bd 100644 --- a/hw/bsp/samd21/boards/feather_m0_express/board.h +++ b/hw/bsp/samd21/boards/feather_m0_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/itsybitsy_m0/board.h b/hw/bsp/samd21/boards/itsybitsy_m0/board.h index 177fb695e..6ee814da5 100644 --- a/hw/bsp/samd21/boards/itsybitsy_m0/board.h +++ b/hw/bsp/samd21/boards/itsybitsy_m0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/luna_d21/board.h b/hw/bsp/samd21/boards/luna_d21/board.h index 2e0a2a60f..776063636 100644 --- a/hw/bsp/samd21/boards/luna_d21/board.h +++ b/hw/bsp/samd21/boards/luna_d21/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/luna_d21/board.mk b/hw/bsp/samd21/boards/luna_d21/board.mk index 27a634e3a..508a72b1f 100644 --- a/hw/bsp/samd21/boards/luna_d21/board.mk +++ b/hw/bsp/samd21/boards/luna_d21/board.mk @@ -8,4 +8,3 @@ JLINK_DEVICE = ATSAMD21G18 # flash using dfu-util flash: $(BUILD)/$(PROJECT).bin dfu-util -a 0 -d 1d50:615c -D $< || dfu-util -a 0 -d 16d0:05a5 -D $< - diff --git a/hw/bsp/samd21/boards/metro_m0_express/board.h b/hw/bsp/samd21/boards/metro_m0_express/board.h index 13b7556b0..d26aae53c 100644 --- a/hw/bsp/samd21/boards/metro_m0_express/board.h +++ b/hw/bsp/samd21/boards/metro_m0_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/qtpy/board.h b/hw/bsp/samd21/boards/qtpy/board.h index 6f8325e49..9ba39e966 100644 --- a/hw/bsp/samd21/boards/qtpy/board.h +++ b/hw/bsp/samd21/boards/qtpy/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/seeeduino_xiao/board.h b/hw/bsp/samd21/boards/seeeduino_xiao/board.h index 0d1e9cef1..1bd63d6d9 100644 --- a/hw/bsp/samd21/boards/seeeduino_xiao/board.h +++ b/hw/bsp/samd21/boards/seeeduino_xiao/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd21/boards/trinket_m0/board.h b/hw/bsp/samd21/boards/trinket_m0/board.h index c8692e6bd..741f2a7f3 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.h +++ b/hw/bsp/samd21/boards/trinket_m0/board.h @@ -31,4 +31,3 @@ // UART #define UART_SERCOM 0 - diff --git a/hw/bsp/samd21/boards/trinket_m0/board.mk b/hw/bsp/samd21/boards/trinket_m0/board.mk index 803ffe892..6addf13b7 100644 --- a/hw/bsp/samd21/boards/trinket_m0/board.mk +++ b/hw/bsp/samd21/boards/trinket_m0/board.mk @@ -2,4 +2,3 @@ CFLAGS += -D__SAMD21E18A__ -DCFG_EXAMPLE_VIDEO_READONLY # All source paths should be relative to the top level. LD_FILE = $(BOARD_PATH)/trinket_m0.ld - diff --git a/hw/bsp/samd21/family.c b/hw/bsp/samd21/family.c index 494dc393a..308fb51b5 100644 --- a/hw/bsp/samd21/family.c +++ b/hw/bsp/samd21/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.h b/hw/bsp/samd51/boards/feather_m4_express/board.h index 1d5ed8040..4629643fd 100644 --- a/hw/bsp/samd51/boards/feather_m4_express/board.h +++ b/hw/bsp/samd51/boards/feather_m4_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/itsybitsy_m4/board.h b/hw/bsp/samd51/boards/itsybitsy_m4/board.h index 0760d4288..272315771 100644 --- a/hw/bsp/samd51/boards/itsybitsy_m4/board.h +++ b/hw/bsp/samd51/boards/itsybitsy_m4/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.h b/hw/bsp/samd51/boards/metro_m4_express/board.h index ab10ae4f8..5d7734576 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.h +++ b/hw/bsp/samd51/boards/metro_m4_express/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.mk b/hw/bsp/samd51/boards/metro_m4_express/board.mk index d7953cc24..57a680e91 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.mk +++ b/hw/bsp/samd51/boards/metro_m4_express/board.mk @@ -7,4 +7,3 @@ LD_FILE = $(BOARD_PATH)/$(BOARD).ld JLINK_DEVICE = ATSAMD51J19 flash: flash-bossac - diff --git a/hw/bsp/samd51/boards/pybadge/board.h b/hw/bsp/samd51/boards/pybadge/board.h index 1d5ed8040..4629643fd 100644 --- a/hw/bsp/samd51/boards/pybadge/board.h +++ b/hw/bsp/samd51/boards/pybadge/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/boards/pyportal/board.h b/hw/bsp/samd51/boards/pyportal/board.h index 9e51ded32..ff04c900b 100644 --- a/hw/bsp/samd51/boards/pyportal/board.h +++ b/hw/bsp/samd51/boards/pyportal/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index 020e638c4..3da89ee14 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/same54xplainedpro/same54p20a_flash.ld b/hw/bsp/same54xplainedpro/same54p20a_flash.ld index 97072bfe6..1f427a066 100644 --- a/hw/bsp/same54xplainedpro/same54p20a_flash.ld +++ b/hw/bsp/same54xplainedpro/same54p20a_flash.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/same54xplainedpro/same54p20a_sram.ld b/hw/bsp/same54xplainedpro/same54p20a_sram.ld index 6219f4afe..e6e33ec48 100644 --- a/hw/bsp/same54xplainedpro/same54p20a_sram.ld +++ b/hw/bsp/same54xplainedpro/same54p20a_sram.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/samg55xplained/samg55xplained.c b/hw/bsp/samg55xplained/samg55xplained.c index 027c88e2f..6e1ed56a9 100644 --- a/hw/bsp/samg55xplained/samg55xplained.c +++ b/hw/bsp/samg55xplained/samg55xplained.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019, hathach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h index a3e03997c..315e40c78 100644 --- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.h +++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.h b/hw/bsp/saml2x/boards/saml22_feather/board.h index 13a326000..72e9897b6 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/board.h +++ b/hw/bsp/saml2x/boards/saml22_feather/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld b/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld index d1aaa44fc..156c3e7e4 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld +++ b/hw/bsp/saml2x/boards/saml22_feather/saml22_feather.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h index 7fc690ab2..735f6afc8 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.h +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld b/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld index d1aaa44fc..156c3e7e4 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/sensorwatch_m0.ld @@ -14,9 +14,9 @@ * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the Licence at - * + * * http://www.apache.org/licenses/LICENSE-2.0 - * + * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. diff --git a/hw/bsp/saml2x/family.c b/hw/bsp/saml2x/family.c index 470fde750..f119d23a1 100644 --- a/hw/bsp/saml2x/family.c +++ b/hw/bsp/saml2x/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/sltb009a/sltb009a.c b/hw/bsp/sltb009a/sltb009a.c index b5eb5ed5d..2a5d112a8 100644 --- a/hw/bsp/sltb009a/sltb009a.c +++ b/hw/bsp/sltb009a/sltb009a.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021 Rafael Silva (@perigoso) @@ -712,7 +712,7 @@ uint32_t board_millis(void) * @retval None */ void assert_failed(char *file, uint32_t line) -{ +{ /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ diff --git a/hw/bsp/spresense/board_spresense.c b/hw/bsp/spresense/board_spresense.c index 256bccd15..5f778ad70 100644 --- a/hw/bsp/spresense/board_spresense.c +++ b/hw/bsp/spresense/board_spresense.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright 2019 Sony Semiconductor Solutions Corporation @@ -64,7 +64,7 @@ void board_led_write(bool state) // a '1' means active (pressed), a '0' means inactive. uint32_t board_button_read(void) { - if (board_gpio_read(BUTTON_PIN)) + if (board_gpio_read(BUTTON_PIN)) { return 0; } @@ -96,7 +96,7 @@ uint32_t board_millis(void) /* Wait until RTC is available */ while (g_rtc_enabled == false); - if (clock_gettime(CLOCK_MONOTONIC, &tp)) + if (clock_gettime(CLOCK_MONOTONIC, &tp)) { return 0; } diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h index 7c527e2c2..9af81e63c 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk index cf787a103..1cc443352 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk @@ -12,4 +12,4 @@ IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f070xb_flash.icf JLINK_DEVICE = stm32f070rb # flash target using on-board stlink -flash: flash-stlink
\ No newline at end of file +flash: flash-stlink diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld index 4a6491510..6bb9d33cb 100644 --- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld +++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/stm32F070rbtx_flash.ld @@ -102,12 +102,12 @@ SECTIONS . = ALIGN(4); } >FLASH - .ARM.extab : { + .ARM.extab : { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >FLASH - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -124,7 +124,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >FLASH - + .init_array : { . = ALIGN(4); @@ -134,7 +134,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >FLASH - + .fini_array : { . = ALIGN(4); @@ -149,7 +149,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -158,9 +158,9 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> FLASH - + /* Uninitialized data section into "RAM" Ram type memory */ . = ALIGN(4); .bss : diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld index f0879e929..8715e0723 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld +++ b/hw/bsp/stm32f0/boards/stm32f072disco/STM32F072RBTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.h b/hw/bsp/stm32f0/boards/stm32f072disco/board.h index 0b1824b8e..1febd01e8 100644 --- a/hw/bsp/stm32f0/boards/stm32f072disco/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.h b/hw/bsp/stm32f0/boards/stm32f072eval/board.h index 8869d5dc9..7dcfa3e85 100644 --- a/hw/bsp/stm32f0/boards/stm32f072eval/board.h +++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/family.c b/hw/bsp/stm32f0/family.c index 884208fb1..bfa843494 100644 --- a/hw/bsp/stm32f0/family.c +++ b/hw/bsp/stm32f0/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f0/stm32f0xx_hal_conf.h b/hw/bsp/stm32f0/stm32f0xx_hal_conf.h index 0bf053e13..b205464f3 100644 --- a/hw/bsp/stm32f0/stm32f0xx_hal_conf.h +++ b/hw/bsp/stm32f0/stm32f0xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_CAN_MODULE_ENABLED */ /*#define HAL_CEC_MODULE_ENABLED */ @@ -65,15 +65,15 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ /** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ @@ -82,24 +82,24 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value */ -#if !defined (HSI_STARTUP_TIMEOUT) +#if !defined (HSI_STARTUP_TIMEOUT) #define HSI_STARTUP_TIMEOUT 5000U /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ +#endif /* HSI_STARTUP_TIMEOUT */ /** * @brief Internal High Speed oscillator for ADC (HSI14) value. */ -#if !defined (HSI14_VALUE) +#if !defined (HSI14_VALUE) #define HSI14_VALUE 14000000U /*!< Value of the Internal High Speed oscillator for ADC in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -108,7 +108,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -117,8 +117,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 32000U +#if !defined (LSI_VALUE) + #define LSI_VALUE 32000U #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -127,7 +127,7 @@ */ #if !defined (LSE_VALUE) #define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ +#endif /* LSE_VALUE */ /** * @brief Time out for LSE start up value in ms. @@ -143,8 +143,8 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ -#define VDD_VALUE 3300U /*!< Value of VDD in mv */ + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ /* Warning: Must be set to higher priority for HAL_Delay() */ /* and HAL_GetTick() usage under interrupt context */ @@ -175,14 +175,14 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ - #define USE_FULL_ASSERT 1 + #define USE_FULL_ASSERT 1 /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -299,7 +299,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -308,8 +308,8 @@ void assert_failed(const char* file, uint32_t line); #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - +#endif /* USE_FULL_ASSERT */ + #ifdef __cplusplus } #endif @@ -318,4 +318,3 @@ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld index c434ca038..95836522e 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/STM32F103X8_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h index 57a607ed5..8fa8f4ffa 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld index da637d1b0..524ac7c03 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/STM32F103XC_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h index bedce7f14..c8dba4268 100644 --- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h +++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f1/family.c b/hw/bsp/stm32f1/family.c index 6f0471096..5e112de70 100644 --- a/hw/bsp/stm32f1/family.c +++ b/hw/bsp/stm32f1/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -53,7 +53,7 @@ void USBWakeUp_IRQHandler(void) void board_init(void) { board_stm32f1_clock_init(); - + // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); @@ -70,7 +70,7 @@ void board_init(void) NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - + // LED GPIO_InitTypeDef GPIO_InitStruct; GPIO_InitStruct.Pin = LED_PIN; @@ -153,7 +153,7 @@ void HardFault_Handler (void) * @retval None */ void assert_failed(const char *file, uint32_t line) -{ +{ /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ diff --git a/hw/bsp/stm32f1/stm32f1xx_hal_conf.h b/hw/bsp/stm32f1/stm32f1xx_hal_conf.h index 5243e5bca..45ef993da 100644 --- a/hw/bsp/stm32f1/stm32f1xx_hal_conf.h +++ b/hw/bsp/stm32f1/stm32f1xx_hal_conf.h @@ -32,7 +32,7 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ #define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ @@ -69,9 +69,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #if defined(USE_STM3210C_EVAL) #define HSE_VALUE 25000000U /*!< Value of the External oscillator in Hz */ #else @@ -86,7 +86,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 8000000U /*!< Value of the Internal oscillator in Hz */ @@ -95,7 +95,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -119,7 +119,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -151,7 +151,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -168,7 +168,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 8U /* 8 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -176,9 +176,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -190,7 +190,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -205,13 +205,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -233,7 +233,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -243,7 +243,7 @@ #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32f1xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ - + #ifdef HAL_EXTI_MODULE_ENABLED #include "stm32f1xx_hal_exti.h" #endif /* HAL_EXTI_MODULE_ENABLED */ @@ -251,7 +251,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f1xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CAN_MODULE_ENABLED #include "stm32f1xx_hal_can.h" #endif /* HAL_CAN_MODULE_ENABLED */ @@ -310,15 +310,15 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f1xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ +#endif /* HAL_PCCARD_MODULE_ENABLED */ #ifdef HAL_SD_MODULE_ENABLED #include "stm32f1xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ +#endif /* HAL_SD_MODULE_ENABLED */ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f1xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_SPI_MODULE_ENABLED #include "stm32f1xx_hal_spi.h" @@ -358,7 +358,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -367,8 +367,8 @@ void assert_failed(const char* file, uint32_t line); #else #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - +#endif /* USE_FULL_ASSERT */ + #ifdef __cplusplus } #endif diff --git a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld index 5010435ae..3fce1b578 100644 --- a/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld +++ b/hw/bsp/stm32f207nucleo/STM32F207ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f207nucleo/stm32f207nucleo.c index d77643661..80f762c93 100644 --- a/hw/bsp/stm32f207nucleo/stm32f207nucleo.c +++ b/hw/bsp/stm32f207nucleo/stm32f207nucleo.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) @@ -105,7 +105,7 @@ void SystemClock_Config(void) void board_init(void) { SystemClock_Config(); - + #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer SysTick_Config(SystemCoreClock / 1000); diff --git a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h b/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h index 2ab46b260..b38a9d951 100644 --- a/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h +++ b/hw/bsp/stm32f207nucleo/stm32f2xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F2xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CRC_MODULE_ENABLED */ @@ -42,7 +42,7 @@ /* #define HAL_DMA_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ #define HAL_EXTI_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ @@ -52,8 +52,8 @@ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SD_MODULE_ENABLED */ @@ -65,7 +65,7 @@ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ #define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED +#define HAL_PCD_MODULE_ENABLED /* #define HAL_HCD_MODULE_ENABLED */ @@ -73,9 +73,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -86,7 +86,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ @@ -95,7 +95,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -113,8 +113,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the Internal oscillator in Hz*/ @@ -126,7 +126,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE 3300U /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY 0x0FU /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -163,7 +163,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -180,7 +180,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 5U /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -190,7 +190,7 @@ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -202,7 +202,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -217,7 +217,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -228,7 +228,7 @@ #define PHY_ISFR ((uint16_t)0x1D) /*!< PHY Interrupt Source Flag register Offset */ #define PHY_ISFR_INT4 ((uint16_t)0x0010) /*!< PHY Link down inturrupt */ - + /* ################## SPI peripheral configuration ########################## */ /* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver @@ -240,7 +240,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -258,7 +258,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f2xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f2xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -276,7 +276,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f2xx_hal_cryp.h" + #include "stm32f2xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DAC_MODULE_ENABLED @@ -294,7 +294,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f2xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f2xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -309,7 +309,7 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f2xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ +#endif /* HAL_PCCARD_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f2xx_hal_hash.h" @@ -378,14 +378,14 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f2xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -402,6 +402,6 @@ #endif #endif /* __STM32F2xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld index 7f46c71b2..981107af1 100644 --- a/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld +++ b/hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f303disco/stm32f303disco.c index 940c49d26..ac9bda983 100644 --- a/hw/bsp/stm32f303disco/stm32f303disco.c +++ b/hw/bsp/stm32f303disco/stm32f303disco.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h index 0abcbb019..82d3765af 100644 --- a/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h +++ b/hw/bsp/stm32f303disco/stm32f3xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -57,7 +57,7 @@ /* #define HAL_OPAMP_MODULE_ENABLED */ /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SDADC_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ @@ -73,15 +73,15 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ /** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value */ #if !defined (HSE_STARTUP_TIMEOUT) #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ @@ -90,25 +90,25 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value */ -#if !defined (HSI_STARTUP_TIMEOUT) +#if !defined (HSI_STARTUP_TIMEOUT) #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ +#endif /* HSI_STARTUP_TIMEOUT */ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -124,11 +124,11 @@ */ #if !defined (LSE_STARTUP_TIMEOUT) #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ +#endif /* LSE_STARTUP_TIMEOUT */ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source + * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) * - External clock not generated on EVAL 373 @@ -256,8 +256,8 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_HRTIM_MODULE_ENABLED #include "stm32f3xx_hal_hrtim.h" #endif /* HAL_HRTIM_MODULE_ENABLED */ diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld index 9eb53bcc0..0dc2879a4 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/STM32F405RGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h index 19d0a1ea4..d1ad2a6ce 100644 --- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.h +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld index 9eb53bcc0..0dc2879a4 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/pyboardv11/STM32F405RGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.h b/hw/bsp/stm32f4/boards/pyboardv11/board.h index 685919c57..c126f0666 100644 --- a/hw/bsp/stm32f4/boards/pyboardv11/board.h +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld index 2bc5f6c14..b91f456ca 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/STM32F401VCTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h index e1fef7277..e6c99a462 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h index 2ab9a1d57..16f081cfb 100644 --- a/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld index aac6577ea..549787945 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f407disco/STM32F407VGTx_FLASH.ld @@ -115,7 +115,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -128,11 +128,11 @@ SECTIONS _siccmram = LOADADDR(.ccmram); - /* CCM-RAM section - * - * IMPORTANT NOTE! + /* CCM-RAM section + * + * IMPORTANT NOTE! * If initialized variables will be placed in this section, - * the startup code needs to be modified to copy the init-values. + * the startup code needs to be modified to copy the init-values. */ .ccmram : { @@ -140,12 +140,12 @@ SECTIONS _sccmram = .; /* create a global symbol at ccmram start */ *(.ccmram) *(.ccmram*) - + . = ALIGN(4); _eccmram = .; /* create a global symbol at ccmram end */ } >CCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -173,7 +173,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -185,5 +185,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.h b/hw/bsp/stm32f4/boards/stm32f407disco/board.h index 693e0393f..c38f354ce 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f407disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld index 56dcea605..45912ac32 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/STM32F411CEUx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(4); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h index e1fef7277..e6c99a462 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h index 2ab9a1d57..16f081cfb 100644 --- a/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (25000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld index 4477229ea..85bf5c4c4 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f411disco/STM32F411VETx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.h b/hw/bsp/stm32f4/boards/stm32f411disco/board.h index 008a94a5d..57d1e061e 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f411disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld index 2372cc1d9..38dd3d321 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412disco/STM32F412ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.h b/hw/bsp/stm32f4/boards/stm32f412disco/board.h index 7f4a4fa15..d61b70eb9 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/board.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f412disco/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld index 2372cc1d9..38dd3d321 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/STM32F412ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h index 7864f8d5f..e24e782ea 100644 --- a/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -205,7 +205,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB 4U /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -213,9 +213,9 @@ /* Section 2: PHY configuration section */ -/* DP83848 PHY Address*/ +/* DP83848 PHY Address*/ #define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY 0x000000FFU /* PHY Configuration delay */ #define PHY_CONFIG_DELAY 0x00000FFFU @@ -227,7 +227,7 @@ #define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -242,13 +242,13 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x0010) /*!< PHY status register Offset */ #define PHY_MICR ((uint16_t)0x0011) /*!< MII Interrupt Control Register */ #define PHY_MISR ((uint16_t)0x0012) /*!< MII Interrupt Status and Misc. Control Register */ - + #define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ #define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ #define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ @@ -270,7 +270,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -288,7 +288,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -310,7 +310,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -332,7 +332,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -347,11 +347,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -432,7 +432,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -471,7 +471,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h index a2c11d717..7bbd6b54f 100644 --- a/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/stm32f4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F4xx_HAL_CONF_H @@ -30,38 +30,38 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_PCCARD_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ /* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED /* #define HAL_EXTI_MODULE_ENABLED */ /* #define HAL_I2C_MODULE_ENABLED */ /* #define HAL_SMBUS_MODULE_ENABLED */ /* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ /* #define HAL_LTDC_MODULE_ENABLED */ /* #define HAL_DSI_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -69,11 +69,11 @@ // #define HAL_SPI_MODULE_ENABLED /* #define HAL_TIM_MODULE_ENABLED */ #define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ /* #define HAL_WWDG_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ /* #define HAL_HCD_MODULE_ENABLED */ /* #define HAL_FMPI2C_MODULE_ENABLED */ @@ -86,9 +86,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -108,8 +108,8 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (32000U) +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000U) #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. */ @@ -126,8 +126,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE (12288000U) /*!< Value of the External oscillator in Hz*/ @@ -139,9 +139,9 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ +#define TICK_INT_PRIORITY (0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U #define PREFETCH_ENABLE 1U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -263,7 +263,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -281,7 +281,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f4xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f4xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -303,7 +303,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" + #include "stm32f4xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -325,7 +325,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f4xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f4xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -340,11 +340,11 @@ #ifdef HAL_PCCARD_MODULE_ENABLED #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - +#endif /* HAL_PCCARD_MODULE_ENABLED */ + #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f4xx_hal_hash.h" @@ -425,7 +425,7 @@ #ifdef HAL_HCD_MODULE_ENABLED #include "stm32f4xx_hal_hcd.h" #endif /* HAL_HCD_MODULE_ENABLED */ - + #ifdef HAL_DSI_MODULE_ENABLED #include "stm32f4xx_hal_dsi.h" #endif /* HAL_DSI_MODULE_ENABLED */ @@ -464,7 +464,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 93ab5bb35..a308bae05 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h index d0ef6625f..ed02df061 100644 --- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.h +++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.h b/hw/bsp/stm32f7/boards/stm32f723disco/board.h index 93d83efc6..258786b7f 100644 --- a/hw/bsp/stm32f7/boards/stm32f723disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.h b/hw/bsp/stm32f7/boards/stm32f746disco/board.h index ee342b9f5..1c7e6dd2b 100644 --- a/hw/bsp/stm32f7/boards/stm32f746disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld index e1e60bc78..eeb0e29f3 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/STM32F746ZGTx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h index 92c109a72..cf895af87 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h index 234191b00..03dec8f0d 100644 --- a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h +++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h @@ -2,7 +2,7 @@ ****************************************************************************** * @file stm32f7xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration file. + * @brief HAL configuration file. ****************************************************************************** * @attention * @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F7xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -44,7 +44,7 @@ #define HAL_DMA_MODULE_ENABLED /* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ @@ -58,7 +58,7 @@ /* #define HAL_LTDC_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -84,9 +84,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -97,7 +97,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -106,7 +106,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -124,8 +124,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ @@ -137,7 +137,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -185,7 +185,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -202,7 +202,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -211,7 +211,7 @@ /* Section 2: PHY configuration section */ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY ((uint32_t)0x00000FFF) /* PHY Configuration delay */ #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) @@ -223,7 +223,7 @@ #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -238,7 +238,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -261,7 +261,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -275,7 +275,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f7xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f7xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -301,7 +301,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" + #include "stm32f7xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -323,7 +323,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f7xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f7xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -338,7 +338,7 @@ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f7xx_hal_hash.h" @@ -443,14 +443,14 @@ #ifdef HAL_MDIOS_MODULE_ENABLED #include "stm32f7xx_hal_mdios.h" #endif /* HAL_MDIOS_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -467,6 +467,6 @@ #endif #endif /* __STM32F7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld index 3785f9cbf..520a75539 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/STM32F767ZITx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h index 1283f2313..e053572a7 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk index a460245b2..be5862612 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk @@ -1,5 +1,5 @@ PORT ?= 0 -SPEED ?= full +SPEED ?= full CFLAGS += \ -DSTM32F767xx \ diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h index 234191b00..03dec8f0d 100644 --- a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h +++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h @@ -2,7 +2,7 @@ ****************************************************************************** * @file stm32f7xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration file. + * @brief HAL configuration file. ****************************************************************************** * @attention * @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F7xx_HAL_CONF_H @@ -30,9 +30,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /* #define HAL_ADC_MODULE_ENABLED */ /* #define HAL_CAN_MODULE_ENABLED */ /* #define HAL_CAN_LEGACY_MODULE_ENABLED */ @@ -44,7 +44,7 @@ #define HAL_DMA_MODULE_ENABLED /* #define HAL_DMA2D_MODULE_ENABLED */ /* #define HAL_ETH_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED /* #define HAL_NAND_MODULE_ENABLED */ /* #define HAL_NOR_MODULE_ENABLED */ /* #define HAL_SRAM_MODULE_ENABLED */ @@ -58,7 +58,7 @@ /* #define HAL_LTDC_MODULE_ENABLED */ #define HAL_PWR_MODULE_ENABLED /* #define HAL_QSPI_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED /* #define HAL_RNG_MODULE_ENABLED */ /* #define HAL_RTC_MODULE_ENABLED */ /* #define HAL_SAI_MODULE_ENABLED */ @@ -84,9 +84,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -97,7 +97,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -106,7 +106,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -124,8 +124,8 @@ /** * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. */ #if !defined (EXTERNAL_CLOCK_VALUE) #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/ @@ -137,7 +137,7 @@ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ #define TICK_INT_PRIORITY ((uint32_t)0x0FU) /*!< tick interrupt priority */ #define USE_RTOS 0U @@ -185,7 +185,7 @@ /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -202,7 +202,7 @@ #define MAC_ADDR4 0U #define MAC_ADDR5 0U -/* Definition of the Ethernet driver buffers size and count */ +/* Definition of the Ethernet driver buffers size and count */ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ #define ETH_RXBUFNB ((uint32_t)5) /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ @@ -211,7 +211,7 @@ /* Section 2: PHY configuration section */ /* LAN8742A PHY Address*/ #define LAN8742A_PHY_ADDRESS 0x00 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ #define PHY_RESET_DELAY ((uint32_t)0x00000FFF) /* PHY Configuration delay */ #define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) @@ -223,7 +223,7 @@ #define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ #define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - + #define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ #define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ #define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ @@ -238,7 +238,7 @@ #define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ #define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ #define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - + /* Section 4: Extended PHY Registers */ #define PHY_SR ((uint16_t)0x1F) /*!< PHY special control/ status register Offset */ @@ -261,7 +261,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -275,7 +275,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32f7xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32f7xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -301,7 +301,7 @@ #endif /* HAL_CRC_MODULE_ENABLED */ #ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f7xx_hal_cryp.h" + #include "stm32f7xx_hal_cryp.h" #endif /* HAL_CRYP_MODULE_ENABLED */ #ifdef HAL_DMA2D_MODULE_ENABLED @@ -323,7 +323,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32f7xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_SRAM_MODULE_ENABLED #include "stm32f7xx_hal_sram.h" #endif /* HAL_SRAM_MODULE_ENABLED */ @@ -338,7 +338,7 @@ #ifdef HAL_SDRAM_MODULE_ENABLED #include "stm32f7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ +#endif /* HAL_SDRAM_MODULE_ENABLED */ #ifdef HAL_HASH_MODULE_ENABLED #include "stm32f7xx_hal_hash.h" @@ -443,14 +443,14 @@ #ifdef HAL_MDIOS_MODULE_ENABLED #include "stm32f7xx_hal_mdios.h" #endif /* HAL_MDIOS_MODULE_ENABLED */ - + /* Exported macro ------------------------------------------------------------*/ #ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -467,6 +467,6 @@ #endif #endif /* __STM32F7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.h b/hw/bsp/stm32f7/boards/stm32f769disco/board.h index 5ec217f5f..472af0b98 100644 --- a/hw/bsp/stm32f7/boards/stm32f769disco/board.h +++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld index 9c327483b..c43829994 100644 --- a/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld +++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/STM32G474RETx_FLASH.ld @@ -135,7 +135,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -146,7 +146,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -174,7 +174,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -186,5 +186,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32g4/family.c b/hw/bsp/stm32g4/family.c index f3ba54576..f5177fd10 100644 --- a/hw/bsp/stm32g4/family.c +++ b/hw/bsp/stm32g4/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32g4/stm32g4xx_hal_conf.h b/hw/bsp/stm32g4/stm32g4xx_hal_conf.h index ad5f7dbd4..632c4f0ac 100644 --- a/hw/bsp/stm32g4/stm32g4xx_hal_conf.h +++ b/hw/bsp/stm32g4/stm32g4xx_hal_conf.h @@ -15,7 +15,7 @@ * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32G4xx_HAL_CONF_H @@ -30,10 +30,10 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ - -#define HAL_MODULE_ENABLED + +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ @@ -111,9 +111,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE (24000000UL) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -124,7 +124,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/ @@ -145,10 +145,10 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature.*/ -#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /** * @brief External Low Speed oscillator (LSE) value. @@ -156,7 +156,7 @@ The real value may vary depending on the variations in voltage and temperature.* */ #if !defined (LSE_VALUE) #define LSE_VALUE (32768UL) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ +#endif /* LSE_VALUE */ #if !defined (LSE_STARTUP_TIMEOUT) #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ @@ -177,10 +177,10 @@ The real value may vary depending on the variations in voltage and temperature.* /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ +#define TICK_INT_PRIORITY (0UL) /*!< tick interrupt priority (lowest by default) */ #define USE_RTOS 0U #define PREFETCH_ENABLE 0U #define INSTRUCTION_CACHE_ENABLE 1U @@ -188,7 +188,7 @@ The real value may vary depending on the variations in voltage and temperature.* /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.mk b/hw/bsp/stm32h7/boards/daisyseed/board.mk index 4d718f04e..d53782496 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/board.mk +++ b/hw/bsp/stm32h7/boards/daisyseed/board.mk @@ -16,4 +16,3 @@ JLINK_DEVICE = stm32h750ibk6_m7 # flash target using on-board stlink flash: flash-stlink - diff --git a/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld b/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld index 83904067a..3588ada5b 100644 --- a/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld +++ b/hw/bsp/stm32h7/boards/daisyseed/stm32h750ibkx_flash.ld @@ -172,5 +172,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld index 7ee40671c..336afc01f 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld @@ -118,7 +118,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -129,7 +129,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >DTCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -157,7 +157,7 @@ SECTIONS . = ALIGN(8); } >DTCMRAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -169,5 +169,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld index 7ee40671c..336afc01f 100644 --- a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld @@ -118,7 +118,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -129,7 +129,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >DTCMRAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -157,7 +157,7 @@ SECTIONS . = ALIGN(8); } >DTCMRAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -169,5 +169,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk index b51b109f6..86347ade7 100644 --- a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk @@ -19,4 +19,3 @@ JLINK_DEVICE = stm32h745xi_m7 # flash target using on-board stlink flash: flash-stlink - diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld index e99bb977b..697a1a1df 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/STM32H743IITX_FLASH.ld @@ -171,5 +171,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk index fbf4b55c6..e8202d9fc 100644 --- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk +++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk @@ -21,4 +21,4 @@ IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf JLINK_DEVICE = stm32h743ii # flash target using jlink -flash: flash-jlink
\ No newline at end of file +flash: flash-jlink diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index 65ffc8ef4..35b2cd55b 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -91,7 +91,7 @@ void board_init(void) #endif NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif - + GPIO_InitTypeDef GPIO_InitStruct; // LED diff --git a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h index a7cc6d826..216fc82f2 100644 --- a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h +++ b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h @@ -1,7 +1,7 @@ /** ****************************************************************************** * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed * to stm32h7xx_hal_conf.h. ****************************************************************************** @@ -32,7 +32,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32H7xx_HAL_CONF_H @@ -478,6 +478,6 @@ #endif #endif /* __STM32H7xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld index dfefe59f1..d4d5b6ca5 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/STM32L052K8Ux_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h index 8ad3e43c8..c8963199b 100644 --- a/hw/bsp/stm32l0/boards/stm32l052dap52/board.h +++ b/hw/bsp/stm32l0/boards/stm32l052dap52/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -58,43 +58,43 @@ static inline void board_stm32l0_clock_init(void) RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; static RCC_CRSInitTypeDef RCC_CRSInitStruct; - + /* Enable HSI Oscillator to be used as System clock source Enable HSI48 Oscillator to be used as USB clock source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.HSI48State = RCC_HSI48_ON; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - + HAL_RCC_OscConfig(&RCC_OscInitStruct); + /* Select HSI48 as USB clock source */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 + + /* Select HSI as system clock source and configure the HCLK, PCLK1 and PCLK2 clock dividers */ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0); - + /*Configure the clock recovery system (CRS)**********************************/ - + /*Enable CRS Clock*/ - __HAL_RCC_CRS_CLK_ENABLE(); - + __HAL_RCC_CRS_CLK_ENABLE(); + /* Default Synchro Signal division factor (not divided) */ - RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; + RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1; /* Set the SYNCSRC[1:0] bits according to CRS_Source value */ - RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; + RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB; /* HSI48 is synchronized with USB SOF at 1KHz rate */ RCC_CRSInitStruct.ReloadValue = __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000); - RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; + RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT; /* Set the TRIM[5:0] to the default value*/ - RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; - /* Start automatic synchronization */ + RCC_CRSInitStruct.HSI48CalibrationValue = 0x20; + /* Start automatic synchronization */ HAL_RCCEx_CRSConfig (&RCC_CRSInitStruct); } diff --git a/hw/bsp/stm32l0/family.c b/hw/bsp/stm32l0/family.c index dcd71a513..6bce88b39 100644 --- a/hw/bsp/stm32l0/family.c +++ b/hw/bsp/stm32l0/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h index cc20ea8e0..e3a131043 100644 --- a/hw/bsp/stm32l0/stm32l0xx_hal_conf.h +++ b/hw/bsp/stm32l0/stm32l0xx_hal_conf.h @@ -2,22 +2,22 @@ ****************************************************************************** * @file stm32l0xx_hal_conf.h * @author MCD Application Team - * @brief HAL configuration template file. + * @brief HAL configuration template file. * This file should be copied to the application folder and renamed * to stm32l0xx_hal_conf.h. ****************************************************************************** * @attention * - * <h2><center>© Copyright (c) 2016 STMicroelectronics. + * <h2><center>© Copyright (c) 2016 STMicroelectronics. * All rights reserved.</center></h2> * * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the + * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L0xx_HAL_CONF_H @@ -32,9 +32,9 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED /*#define HAL_ADC_MODULE_ENABLED */ /*#define HAL_COMP_MODULE_ENABLED */ /*#define HAL_CRC_MODULE_ENABLED */ @@ -69,9 +69,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -90,7 +90,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -99,7 +99,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -108,7 +108,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -128,24 +128,24 @@ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ - + /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ + */ #define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U +#define TICK_INT_PRIORITY (((uint32_t)1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U #define PREREAD_ENABLE 0U #define BUFFER_CACHE_DISABLE 0U /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1U */ @@ -191,13 +191,13 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED #include "stm32l0xx_hal_rcc.h" #endif /* HAL_RCC_MODULE_ENABLED */ - + #ifdef HAL_GPIO_MODULE_ENABLED #include "stm32l0xx_hal_gpio.h" #endif /* HAL_GPIO_MODULE_ENABLED */ @@ -233,11 +233,11 @@ #ifdef HAL_FIREWALL_MODULE_ENABLED #include "stm32l0xx_hal_firewall.h" #endif /* HAL_FIREWALL_MODULE_ENABLED */ - + #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32l0xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_I2C_MODULE_ENABLED #include "stm32l0xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ @@ -257,7 +257,7 @@ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32l0xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ - + #ifdef HAL_PWR_MODULE_ENABLED #include "stm32l0xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ @@ -316,7 +316,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -332,7 +332,6 @@ #endif #endif /* __STM32L0xx_HAL_CONF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld index 79427d80b..033dcc0ad 100644 --- a/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld +++ b/hw/bsp/stm32l0538disco/STM32L053C8Tx_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -165,5 +165,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l0538disco/stm32l0538disco.c b/hw/bsp/stm32l0538disco/stm32l0538disco.c index f4c38d150..46f6f0ff6 100644 --- a/hw/bsp/stm32l0538disco/stm32l0538disco.c +++ b/hw/bsp/stm32l0538disco/stm32l0538disco.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2019 Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h b/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h index 773b74e29..a917214c3 100644 --- a/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h +++ b/hw/bsp/stm32l0538disco/stm32l0xx_hal_conf.h @@ -7,39 +7,39 @@ * * Copyright (c) 2016 STMicroelectronics International N.V. All rights reserved. * - * Redistribution and use in source and binary forms, with or without + * Redistribution and use in source and binary forms, with or without * modification, are permitted, provided that the following conditions are met: * - * 1. Redistribution of source code must retain the above copyright notice, + * 1. Redistribution of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this + * 4. This software, including modifications and/or derivative works of this * software, must execute solely and exclusively on microcontroller or * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** - */ + */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L0xx_HAL_CONF_H @@ -54,36 +54,36 @@ /* ########################## Module Selection ############################## */ /** - * @brief This is the list of modules to be used in the HAL driver + * @brief This is the list of modules to be used in the HAL driver */ -#define HAL_MODULE_ENABLED +#define HAL_MODULE_ENABLED // #define HAL_ADC_MODULE_ENABLED -/* #define HAL_COMP_MODULE_ENABLED */ -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ #define HAL_DMA_MODULE_ENABLED /* #define HAL_FIREWALL_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED #define HAL_GPIO_MODULE_ENABLED /* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ /* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_LCD_MODULE_ENABLED */ +/* #define HAL_LCD_MODULE_ENABLED */ /* #define HAL_LPTIM_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED //#define HAL_RNG_MODULE_ENABLED /* #define HAL_RTC_MODULE_ENABLED */ //#define HAL_SPI_MODULE_ENABLED -/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ /* #define HAL_TSC_MODULE_ENABLED */ -/* #define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_UART_MODULE_ENABLED */ +/* #define HAL_USART_MODULE_ENABLED */ /* #define HAL_IRDA_MODULE_ENABLED */ /* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ //#define HAL_PCD_MODULE_ENABLED #define HAL_CORTEX_MODULE_ENABLED /* #define HAL_PCD_MODULE_ENABLED */ @@ -93,9 +93,9 @@ /** * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). + * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ @@ -114,7 +114,7 @@ /** * @brief Internal High Speed oscillator (HSI) value. * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). + * (when HSI is used as system clock source, directly or through the PLL). */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ @@ -123,7 +123,7 @@ /** * @brief Internal High Speed oscillator for USB (HSI48) value. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE ((uint32_t)48000000U) /*!< Value of the Internal High Speed oscillator for USB in Hz. The real value may vary depending on the variations in voltage and temperature. */ @@ -132,7 +132,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE ((uint32_t)37000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -152,24 +152,24 @@ #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ - + /* Tip: To avoid modifying this file each time you need to use different HSE, === you can define the HSE value in your toolchain compiler preprocessor. */ /* ########################### System Configuration ######################### */ /** * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U #define PREREAD_ENABLE 1U #define BUFFER_CACHE_DISABLE 0U /* ########################## Assert Selection ############################## */ /** - * @brief Uncomment the line below to expanse the "assert_param" macro in the + * @brief Uncomment the line below to expanse the "assert_param" macro in the * HAL drivers code */ /* #define USE_FULL_ASSERT 1 */ @@ -185,7 +185,7 @@ /* Includes ------------------------------------------------------------------*/ /** - * @brief Include module's header file + * @brief Include module's header file */ #ifdef HAL_RCC_MODULE_ENABLED @@ -199,7 +199,7 @@ #ifdef HAL_DMA_MODULE_ENABLED #include "stm32l0xx_hal_dma.h" #endif /* HAL_DMA_MODULE_ENABLED */ - + #ifdef HAL_CORTEX_MODULE_ENABLED #include "stm32l0xx_hal_cortex.h" #endif /* HAL_CORTEX_MODULE_ENABLED */ @@ -211,7 +211,7 @@ #ifdef HAL_COMP_MODULE_ENABLED #include "stm32l0xx_hal_comp.h" #endif /* HAL_COMP_MODULE_ENABLED */ - + #ifdef HAL_CRC_MODULE_ENABLED #include "stm32l0xx_hal_crc.h" #endif /* HAL_CRC_MODULE_ENABLED */ @@ -231,7 +231,7 @@ #ifdef HAL_FLASH_MODULE_ENABLED #include "stm32l0xx_hal_flash.h" #endif /* HAL_FLASH_MODULE_ENABLED */ - + #ifdef HAL_I2C_MODULE_ENABLED #include "stm32l0xx_hal_i2c.h" #endif /* HAL_I2C_MODULE_ENABLED */ @@ -251,7 +251,7 @@ #ifdef HAL_LPTIM_MODULE_ENABLED #include "stm32l0xx_hal_lptim.h" #endif /* HAL_LPTIM_MODULE_ENABLED */ - + #ifdef HAL_PWR_MODULE_ENABLED #include "stm32l0xx_hal_pwr.h" #endif /* HAL_PWR_MODULE_ENABLED */ @@ -310,7 +310,7 @@ * @brief The assert_param macro is used for function's parameters check. * @param expr If expr is false, it calls assert_failed function * which reports the name of the source file and the source - * line number of the call that failed. + * line number of the call that failed. * If expr is true, it returns no value. * @retval None */ @@ -326,6 +326,6 @@ #endif #endif /* __STM32L0xx_HAL_CONF_H */ - + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld index d4b86b3e3..4ae4a4cf4 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/STM32L412KBUx_FLASH.ld @@ -83,8 +83,8 @@ SECTIONS . = ALIGN(8); } >FLASH - .ARM.extab : - { + .ARM.extab : + { . = ALIGN(8); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(8); @@ -105,7 +105,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(8); } >FLASH - + .init_array : { . = ALIGN(8); @@ -129,7 +129,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(8); _sdata = .; /* create a global symbol at data start */ @@ -140,7 +140,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -168,7 +168,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -180,5 +180,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h index 704d742cc..72d17b760 100644 --- a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) @@ -94,7 +94,7 @@ static inline void board_clock_init(void) RCC_OscInitStruct.PLL.PLLN = 10; RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; - + HAL_RCC_OscConfig(&RCC_OscInitStruct); /** Initializes the CPU, AHB and APB buses clocks @@ -122,7 +122,7 @@ static inline void board_clock_init(void) RCC_CRSInitStruct.HSI48CalibrationValue = 32; HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct); - + /* Select HSI48 output as USB clock source */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_HSI48; diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld index d6865f49d..3bb13ed85 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l476disco/STM32L476VGTx_FLASH.ld @@ -82,8 +82,8 @@ SECTIONS . = ALIGN(8); } >FLASH - .ARM.extab : - { + .ARM.extab : + { . = ALIGN(8); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(8); @@ -104,7 +104,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(8); } >FLASH - + .init_array : { . = ALIGN(8); @@ -128,7 +128,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(8); _sdata = .; /* create a global symbol at data start */ @@ -139,7 +139,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -167,7 +167,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -179,5 +179,3 @@ SECTIONS .ARM.attributes 0 : { *(.ARM.attributes) } } - - diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.h b/hw/bsp/stm32l4/boards/stm32l476disco/board.h index 42c657d5e..9d4351b39 100644 --- a/hw/bsp/stm32l4/boards/stm32l476disco/board.h +++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld index c1a490a70..02c07dd74 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/STM32L4P5ZGTX_FLASH.ld @@ -102,12 +102,12 @@ SECTIONS . = ALIGN(4); } >ROM - .ARM.extab : { + .ARM.extab : { . = ALIGN(4); *(.ARM.extab* .gnu.linkonce.armextab.*) . = ALIGN(4); } >ROM - + .ARM : { . = ALIGN(4); __exidx_start = .; @@ -124,7 +124,7 @@ SECTIONS PROVIDE_HIDDEN (__preinit_array_end = .); . = ALIGN(4); } >ROM - + .init_array : { . = ALIGN(4); @@ -134,7 +134,7 @@ SECTIONS PROVIDE_HIDDEN (__init_array_end = .); . = ALIGN(4); } >ROM - + .fini_array : { . = ALIGN(4); @@ -149,7 +149,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections into "RAM" Ram type memory */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -158,7 +158,7 @@ SECTIONS . = ALIGN(4); _edata = .; /* define a global symbol at data end */ - + } >RAM AT> ROM /* Uninitialized data section into "RAM" Ram type memory */ diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h index 1df389aed..47ada6bb9 100644 --- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld index f77c72d1b..267a87a8b 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/STM32L4RXxI_FLASH.ld @@ -114,7 +114,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -125,7 +125,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -153,7 +153,7 @@ SECTIONS . = ALIGN(8); } >RAM - + /* Remove information from the standard libraries */ /DISCARD/ : diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h index 1df389aed..47ada6bb9 100644 --- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h +++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2020, Ha Thach (tinyusb.org) diff --git a/hw/bsp/stm32l4/stm32l4xx_hal_conf.h b/hw/bsp/stm32l4/stm32l4xx_hal_conf.h index 312f86da1..25dbc0523 100644 --- a/hw/bsp/stm32l4/stm32l4xx_hal_conf.h +++ b/hw/bsp/stm32l4/stm32l4xx_hal_conf.h @@ -50,7 +50,7 @@ /* #define HAL_NAND_MODULE_ENABLED */ // #define HAL_NOR_MODULE_ENABLED // #define HAL_SRAM_MODULE_ENABLED -/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ #define HAL_GPIO_MODULE_ENABLED //#define HAL_I2C_MODULE_ENABLED /* #define HAL_IRDA_MODULE_ENABLED */ @@ -115,7 +115,7 @@ * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency * which is subject to manufacturing process variations. */ -#if !defined (HSI48_VALUE) +#if !defined (HSI48_VALUE) #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz. The real value my vary depending on manufacturing process variations.*/ #endif /* HSI48_VALUE */ @@ -123,7 +123,7 @@ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#if !defined (LSI_VALUE) #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -142,7 +142,7 @@ /** * @brief External clock source for SAI1 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. */ #if !defined (EXTERNAL_SAI1_CLOCK_VALUE) @@ -151,7 +151,7 @@ /** * @brief External clock source for SAI2 peripheral - * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source + * This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source * frequency. */ #if !defined (EXTERNAL_SAI2_CLOCK_VALUE) diff --git a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h index 15dffa813..87c3683de 100644 --- a/hw/bsp/stm32u5/stm32u5xx_hal_conf.h +++ b/hw/bsp/stm32u5/stm32u5xx_hal_conf.h @@ -503,4 +503,3 @@ #endif #endif /* STM32U5xx_HAL_CONF_H */ - diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld b/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld index 660f30161..916f11866 100644 --- a/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld @@ -113,7 +113,7 @@ SECTIONS _sidata = LOADADDR(.data); /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : + .data : { . = ALIGN(4); _sdata = .; /* create a global symbol at data start */ @@ -124,7 +124,7 @@ SECTIONS _edata = .; /* define a global symbol at data end */ } >RAM1 AT> FLASH - + /* Uninitialized data section */ . = ALIGN(4); .bss : @@ -152,7 +152,7 @@ SECTIONS . = ALIGN(8); } >RAM1 - + /* Remove information from the standard libraries */ /DISCARD/ : @@ -167,5 +167,3 @@ SECTIONS MB_MEM1 (NOLOAD) : { *(MB_MEM1) } >RAM_SHARED MB_MEM2 (NOLOAD) : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED } - - diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index 525d637ea..e9ca59866 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2022 Jerzy Kasenberg diff --git a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk index d60365d1d..0ff24ab60 100644 --- a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk +++ b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/board.mk @@ -1,5 +1,5 @@ CFLAGS += -DTM4C123GH6PM - + LD_FILE = $(BOARD_PATH)/tm4c123.ld # For flash-jlink target diff --git a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld index e2720a9ac..351857bd6 100644 --- a/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld +++ b/hw/bsp/tm4c123/boards/ek-tm4c123gxl/tm4c123.ld @@ -6,37 +6,37 @@ _Min_Heap_Size = 0; /* required amount of heap */ _Min_Stack_Size = 0x1000; /* required amount of stack */ -MEMORY +MEMORY { FLASH(rx) : ORIGIN = 0x00000000, LENGTH = 256K SRAM(rwx) : ORIGIN = 0x20000000, LENGTH = 32K } -SECTIONS +SECTIONS { - .text : + .text : { . = ALIGN(4) ; - *(.vectors) - *(.text) + *(.vectors) + *(.text) *(.text.*) *(.init) *(.fini) *(.rodata) *(.rodata.*) - . = ALIGN(4) ; - __end_text = . ; + . = ALIGN(4) ; + __end_text = . ; } >FLASH - + .data : AT(ADDR(.text) + SIZEOF(.text)) { . = ALIGN(4); - __start_data = . ; + __start_data = . ; __la_data = LOADADDR(.data); - *(.data) + *(.data) *(.data.*) . = ALIGN(4); - __end_data = . ; + __end_data = . ; } >SRAM @@ -47,7 +47,7 @@ SECTIONS __bss_start__ = __start_bss; *(.bss) *(.bss.*) - *(.COMMON) + *(.COMMON) __end_bss = . ; . = ALIGN(4); }>SRAM diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c index 87b94289b..3f4f43220 100644 --- a/hw/bsp/tm4c123/family.c +++ b/hw/bsp/tm4c123/family.c @@ -175,4 +175,3 @@ uint32_t board_millis (void) return system_ticks; } #endif - diff --git a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h index 3e2cb9583..2d4764f40 100644 --- a/hw/bsp/xmc4000/boards/xmc4500_relax/board.h +++ b/hw/bsp/xmc4000/boards/xmc4500_relax/board.h @@ -1,4 +1,4 @@ -/* +/* * The MIT License (MIT) * * Copyright (c) 2021, Ha Thach (tinyusb.org) diff --git a/hw/mcu/bridgetek/ft9xx/Readme.md b/hw/mcu/bridgetek/ft9xx/Readme.md index 1db91058c..adf8fc765 100644 --- a/hw/mcu/bridgetek/ft9xx/Readme.md +++ b/hw/mcu/bridgetek/ft9xx/Readme.md @@ -2,6 +2,6 @@ **BridgeTek** provides a hardware abstraction library with software source code for the SDKs for FT9xx software family. -Whole SDK repository is installed as part of the FT9xx Toolchain and can be downloaded from BridgeTek web page `https://www.brtchip.com`. +Whole SDK repository is installed as part of the FT9xx Toolchain and can be downloaded from BridgeTek web page `https://www.brtchip.com`. -Registers definition files, and included peripheral register definition files have licenses that allow for redistribution. +Registers definition files, and included peripheral register definition files have licenses that allow for redistribution. diff --git a/hw/mcu/bridgetek/ft9xx/scripts/crt0.S b/hw/mcu/bridgetek/ft9xx/scripts/crt0.S index 62fa266ee..380b31c37 100644 --- a/hw/mcu/bridgetek/ft9xx/scripts/crt0.S +++ b/hw/mcu/bridgetek/ft9xx/scripts/crt0.S @@ -50,11 +50,11 @@ _start: codestart: jmp init - + .global _exithook _exithook: # Debugger uses '_exithook' at 0x90 to catch program exit return - + init: # Disable all interrupts ldk $r0,0x80 @@ -63,12 +63,12 @@ init: .else sta.b 0x100e3,$r0 .endif - + # Reset all peripherals # lda.l $r0, 0x10018 # bins.l $r0, $r0, 0x23F # Set bit 31 # sta.l 0x10018, $r0 - + # Initialize DATA by copying from program memory ldk.l $r0,__data_load_start ldk.l $r1,__data_load_end diff --git a/hw/mcu/dialog/README.md b/hw/mcu/dialog/README.md index 69676f081..33d270aac 100644 --- a/hw/mcu/dialog/README.md +++ b/hw/mcu/dialog/README.md @@ -3,7 +3,5 @@ **Dialog Semiconductors** provides SDKs for DA146x MCU family. Most of the files there can't be redistributed. Registers definition file `DA1469xAB.h` and some **ARM** originated headers are have licenses that allow -for redistribution. +for redistribution. Whole SDK repository can be downloaded from Dialog Semiconductor web page `https://www.dialog.com` - - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt index b324eb286..7e8067a6f 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/arm_license.txt @@ -24,4 +24,3 @@ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---------------------------------------------------------------------------*/ - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h index fdb1a971c..8f871ea31 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_compiler.h @@ -268,4 +268,3 @@ #endif /* __CMSIS_COMPILER_H */ - diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h index 47a4b59d8..812c3789a 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/cmsis_gcc.h @@ -47,9 +47,9 @@ #ifndef __STATIC_INLINE #define __STATIC_INLINE static inline #endif -#ifndef __STATIC_FORCEINLINE +#ifndef __STATIC_FORCEINLINE #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline -#endif +#endif #ifndef __NO_RETURN #define __NO_RETURN __attribute__((__noreturn__)) #endif @@ -586,7 +586,7 @@ __STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence zero is returned always in non-secure mode. - + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). \return PSPLIM Register value */ @@ -631,7 +631,7 @@ __STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure Stack Pointer Limit register hence the write is silently ignored in non-secure mode. - + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set */ @@ -768,7 +768,7 @@ __STATIC_FORCEINLINE uint32_t __get_FPSCR(void) { #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) -#if __has_builtin(__builtin_arm_get_fpscr) +#if __has_builtin(__builtin_arm_get_fpscr) // Re-enable using built-in when GCC has been fixed // || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h index e2cf6b966..a8cd3ea45 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm0.h @@ -62,7 +62,7 @@ */ #include "cmsis_version.h" - + /* CMSIS CM0 definitions */ #define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ #define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h index 7249e1331..05b61383e 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/core_cm33.h @@ -2065,7 +2065,7 @@ typedef struct /* Special LR values for Secure/Non-Secure call handling and exception handling */ -/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ #define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ /* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ @@ -2080,7 +2080,7 @@ typedef struct /* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ #define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ -#else +#else #define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ #endif diff --git a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h index bc3b05109..50bb56333 100644 --- a/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h +++ b/hw/mcu/dialog/da1469x/SDK_10.0.8.105/sdk/bsp/include/mpu_armv8.h @@ -103,7 +103,7 @@ (MPU_RLAR_EN_Msk)) #if defined(MPU_RLAR_PXN_Pos) - + /** \brief Region Limit Address Register with PXN value * \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. * \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. @@ -114,7 +114,7 @@ ((PXN << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ ((IDX << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ (MPU_RLAR_EN_Msk)) - + #endif /** @@ -124,7 +124,7 @@ typedef struct { uint32_t RBAR; /*!< Region Base Address Register value */ uint32_t RLAR; /*!< Region Limit Address Register value */ } ARM_MPU_Region_t; - + /** Enable the MPU. * \param MPU_Control Default access permissions for unconfigured regions. */ @@ -185,11 +185,11 @@ __STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t at const uint8_t reg = idx / 4U; const uint32_t pos = ((idx % 4U) * 8U); const uint32_t mask = 0xFFU << pos; - + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { return; // invalid index } - + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); } @@ -236,7 +236,7 @@ __STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) * \param rnr Region number to be cleared. */ __STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) -{ +{ ARM_MPU_ClrRegionEx(MPU_NS, rnr); } #endif @@ -246,7 +246,7 @@ __STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) { mpu->RNR = rnr; @@ -258,7 +258,7 @@ __STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t r * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) { ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); @@ -269,10 +269,10 @@ __STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rla * \param rnr Region number to be configured. * \param rbar Value for RBAR register. * \param rlar Value for RLAR register. -*/ +*/ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) { - ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); } #endif @@ -284,7 +284,7 @@ __STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t __STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) { uint32_t i; - for (i = 0U; i < len; ++i) + for (i = 0U; i < len; ++i) { dst[i] = src[i]; } @@ -296,7 +296,7 @@ __STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_ * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; if (cnt == 1U) { @@ -305,7 +305,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ } else { uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; - + mpu->RNR = rnrBase; while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { uint32_t c = MPU_TYPE_RALIASES - rnrOffset; @@ -316,7 +316,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ rnrBase += MPU_TYPE_RALIASES; mpu->RNR = rnrBase; } - + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); } } @@ -326,7 +326,7 @@ __STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_ * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { ARM_MPU_LoadEx(MPU, rnr, table, cnt); } @@ -337,11 +337,10 @@ __STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, u * \param table Pointer to the MPU configuration table. * \param cnt Amount of regions to be configured. */ -__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) { ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); } #endif #endif - diff --git a/hw/mcu/dialog/da1469x/da1469x.ld b/hw/mcu/dialog/da1469x/da1469x.ld index c91dea841..0133f3759 100644 --- a/hw/mcu/dialog/da1469x/da1469x.ld +++ b/hw/mcu/dialog/da1469x/da1469x.ld @@ -225,4 +225,3 @@ SECTIONS /* Check that intvect is at the beginning of RAM */ ASSERT(__intvect_start__ == ORIGIN(RAM), "intvect is not at beginning of RAM") } - diff --git a/hw/mcu/dialog/da1469x/include/mcu/mcu.h b/hw/mcu/dialog/da1469x/include/mcu/mcu.h index 1e6736785..38961e828 100644 --- a/hw/mcu/dialog/da1469x/include/mcu/mcu.h +++ b/hw/mcu/dialog/da1469x/include/mcu/mcu.h @@ -162,4 +162,3 @@ void mcu_gpio_exit_sleep(void); #endif #endif /* __MCU_MCU_H_ */ - diff --git a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h index 76a432bfd..9ba24f458 100644 --- a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h +++ b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble.h @@ -539,7 +539,7 @@ SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const *p_v /**@brief Remove a Vendor Specific base UUID. - * + * * @details This call removes a Vendor Specific base UUID that has been added with @ref sd_ble_uuid_vs_add. This function allows * the application to reuse memory allocated for Vendor Specific base UUIDs. * diff --git a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h index c434fefb3..e11149435 100644 --- a/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h +++ b/hw/mcu/nordic/nrf5x/s140_nrf52_6.1.1_API/include/ble_gap.h @@ -1666,7 +1666,7 @@ SVCALL(SD_BLE_GAP_ADDR_GET, uint32_t, sd_ble_gap_addr_get(ble_gap_addr_t *p_addr * * @retval ::NRF_SUCCESS Address successfully retrieved. * @retval ::NRF_ERROR_INVALID_ADDR Invalid or NULL pointer supplied. - * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. + * @retval ::BLE_ERROR_INVALID_ADV_HANDLE The provided advertising handle was not found. * @retval ::NRF_ERROR_INVALID_STATE The advertising set is currently not advertising. */ SVCALL(SD_BLE_GAP_ADV_ADDR_GET, uint32_t, sd_ble_gap_adv_addr_get(uint8_t adv_handle, ble_gap_addr_t *p_addr)); |