usb0 host on mcb1800 work with fullspeed mode.

use usbh_edpt_open() to correctly map ep2drv[]

3 files changed, 4 insertions, 5 deletions

diff --git a/hw/bsp/ea4357/board.mk b/hw/bsp/ea4357/board.mk
index dd987f476..2ee6b695c 100644
--- a/hw/bsp/ea4357/board.mk
+++ b/hw/bsp/ea4357/board.mk
@@ -41,7 +41,7 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = LPC4357
-JLINK_IF = jtag 
+JLINK_IF = jtag
 
 # flash using jlink
 flash: flash-jlink
diff --git a/hw/bsp/mcb1800/board.mk b/hw/bsp/mcb1800/board.mk
index 7806bff46..6037310a6 100644
--- a/hw/bsp/mcb1800/board.mk
+++ b/hw/bsp/mcb1800/board.mk
@@ -5,8 +5,8 @@ CFLAGS += \
   -mcpu=cortex-m3 \
   -nostdlib \
   -DCORE_M3 \
-  -DCFG_TUSB_MCU=OPT_MCU_LPC18XX \
   -D__USE_LPCOPEN
+  -DCFG_TUSB_MCU=OPT_MCU_LPC18XX \
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes
@@ -37,7 +37,7 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = LPC1857
-JLINK_IF = swd
+JLINK_IF = jtag
 
 # flash using jlink
 flash: flash-jlink
diff --git a/hw/bsp/mcb1800/mcb1800.c b/hw/bsp/mcb1800/mcb1800.c
index bfeb126fc..1d7ffb35f 100644
--- a/hw/bsp/mcb1800/mcb1800.c
+++ b/hw/bsp/mcb1800/mcb1800.c
@@ -172,8 +172,7 @@ void board_init(void)
   // Set mode
   #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
     LPC_USB0->USBMODE_H = USBMODE_HOST | (USBMODE_VBUS_HIGH << 5);
-
-//    LPC_USB0->PORTSC1_D |= (1<<24); // FIXME force full speed for debugging
+    LPC_USB0->PORTSC1_H |= (1<<24); // FIXME force full speed for debugging
   #else // TODO OTG
     LPC_USB0->USBMODE_D = USBMODE_DEVICE;
     LPC_USB0->OTGSC = (1<<3) | (1<<0) /*| (1<<16)| (1<<24)| (1<<25)| (1<<26)| (1<<27)| (1<<28)| (1<<29)| (1<<30)*/;