Merge branch 'master' into cdc_uac2_example

author: hathach <[email protected]> 2023-08-03 12:15:07 +0700
committer: hathach <[email protected]> 2023-08-03 12:15:07 +0700
commit: 6844055dd10f35701e267dc734add839c172e8f1 (patch)
tree: 95d442749ab023309cd249e0ba56d2c15452a854 /hw
parent: 3d685fe7f2f383b10a2ed86d33d4b97781843f0d (diff)
parent: 5cf94234d20cf74e1d6bb952ce1680b25f2568b3 (diff)
246 files changed, 20148 insertions, 4658 deletions
diff --git a/hw/bsp/board_mcu.h b/hw/bsp/board_mcu.h
index ce2f919bf..e5d2bb608 100644
--- a/hw/bsp/board_mcu.h
+++ b/hw/bsp/board_mcu.h
@@ -47,7 +47,7 @@
 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX, OPT_MCU_LPC54XXX, OPT_MCU_LPC55XX, OPT_MCU_MCXN9)
   #include "fsl_device_registers.h"
 
-#elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32)
+#elif TU_CHECK_MCU(OPT_MCU_KINETIS_KL, OPT_MCU_KINETIS_K32L)
   #include "fsl_device_registers.h"
 
 #elif CFG_TUSB_MCU == OPT_MCU_NRF5X
diff --git a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk
index 77811d18d..052033230 100644
--- a/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk
+++ b/hw/bsp/broadcom_32bit/boards/raspberrypi_zero_w/board.mk
@@ -1,5 +1,5 @@
-CFLAGS += -mcpu=arm1176jzf-s \
-          -DBCM_VERSION=2835 \
+CPU_CORE = arm1176
+CFLAGS += -DBCM_VERSION=2835 \
           -DCFG_TUSB_MCU=OPT_MCU_BCM2835
 
 SUFFIX =
diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk
index 5706b8318..702f10137 100644
--- a/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk
+++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_cm4/board.mk
@@ -1,3 +1,3 @@
-CFLAGS += -mcpu=cortex-a72 \
-          -DBCM_VERSION=2711 \
+CPU_CORE = cortex-a72
+CFLAGS += -DBCM_VERSION=2711 \
           -DCFG_TUSB_MCU=OPT_MCU_BCM2711
diff --git a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk
index 3060b0571..da3fe17bc 100644
--- a/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk
+++ b/hw/bsp/broadcom_64bit/boards/raspberrypi_zero2w/board.mk
@@ -1,3 +1,3 @@
-CFLAGS += -mcpu=cortex-a53 \
-          -DBCM_VERSION=2837 \
+CPU_CORE = cortex-a53
+CFLAGS += -DBCM_VERSION=2837 \
           -DCFG_TUSB_MCU=OPT_MCU_BCM2837
diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake
index ec36df5c8..b2e61a824 100644
--- a/hw/bsp/family_support.cmake
+++ b/hw/bsp/family_support.cmake
@@ -11,14 +11,38 @@ if (NOT DEFINED TOOLCHAIN)
   set(TOOLCHAIN gcc)
 endif ()
 
-if (NOT FAMILY)
-  message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, eps32s2, esp32s3). You can do this via -DFAMILY=xxx on the cmake command line")
+# FAMILY not defined, try to detect it from BOARD
+if (NOT DEFINED FAMILY)
+  if (NOT DEFINED BOARD)
+    message(FATAL_ERROR "You must set a FAMILY variable for the build (e.g. rp2040, espressif).
+    You can do this via -DFAMILY=xxx on the cmake command line")
+  endif ()
+
+  # Find path contains BOARD
+  file(GLOB BOARD_PATH LIST_DIRECTORIES true
+    RELATIVE ${TOP}/hw/bsp
+    ${TOP}/hw/bsp/*/boards/${BOARD}
+    )
+  if (NOT BOARD_PATH)
+    message(FATAL_ERROR "Could not detect FAMILY from BOARD=${BOARD}")
+  endif ()
+
+  # replace / with ; so that we can get the first element as FAMILY
+  string(REPLACE "/" ";" BOARD_PATH ${BOARD_PATH})
+  list(GET BOARD_PATH 0 FAMILY)
 endif ()
 
 if (NOT EXISTS ${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake)
   message(FATAL_ERROR "Family '${FAMILY}' is not known/supported")
 endif()
 
+# enable LTO if supported
+include(CheckIPOSupported)
+check_ipo_supported(RESULT IPO_SUPPORTED)
+if (IPO_SUPPORTED)
+  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
+endif ()
+
 set(WARNING_FLAGS_GNU
   -Wall
   -Wextra
@@ -47,6 +71,8 @@ set(WARNING_FLAGS_GNU
 
 set(WARNINGS_FLAGS_IAR "")
 
+
+# Filter example based on only.txt and skip.txt
 function(family_filter RESULT DIR)
   get_filename_component(DIR ${DIR} ABSOLUTE BASE_DIR ${CMAKE_CURRENT_SOURCE_DIR})
 
@@ -125,107 +151,136 @@ function(family_initialize_project PROJECT DIR)
 endfunction()
 
 
-# Add segger rtt to example
-function(family_add_segger_rtt TARGET)
-  if (NOT TARGET segger_rtt)
-    add_library(segger_rtt STATIC
-      ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
-      )
-    target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT)
-  endif()
+#-------------------------------------------------------------
+# Common Target Configure
+# Most families use these settings except rp2040 and espressif
+#-------------------------------------------------------------
 
-  target_link_libraries(${TARGET} PUBLIC segger_rtt)
+# Add RTOS to example
+function(family_add_rtos TARGET RTOS)
+  if (RTOS STREQUAL "freertos")
+    # freertos config
+    if (NOT TARGET freertos_config)
+      add_library(freertos_config INTERFACE)
+      target_include_directories(freertos_config INTERFACE ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig)
+      # add board definition to freertos_config mostly for SystemCoreClock
+      target_link_libraries(freertos_config INTERFACE board_${BOARD})
+    endif()
+
+    # freertos kernel
+    if (NOT TARGET freertos_kernel)
+      add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel)
+    endif ()
+
+    target_link_libraries(${TARGET} PUBLIC freertos_kernel)
+  endif ()
 endfunction()
 
-#------------------------------------
-# Main target configure
-#------------------------------------
 
 # Add common configuration to example
-function(family_configure_common TARGET)
+function(family_configure_common TARGET RTOS)
+  family_add_rtos(${TARGET} ${RTOS})
+
   # run size after build
   add_custom_command(TARGET ${TARGET} POST_BUILD
     COMMAND ${CMAKE_SIZE} $<TARGET_FILE:${TARGET}>
     )
 
+  # Add warnings flags
   target_compile_options(${TARGET} PUBLIC ${WARNING_FLAGS_${CMAKE_C_COMPILER_ID}})
 
+  # Generate linker map file
   if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
-    # Generate map file
-    target_link_options(${TARGET} PUBLIC
-      # link map
-      "LINKER:-Map=$<TARGET_FILE:${TARGET}>.map"
-      )
+    target_link_options(${TARGET} PUBLIC "LINKER:-Map=$<TARGET_FILE:${TARGET}>.map")
   endif()
 
-  # LOGGER
+  # ETM Trace option
+  if (TRACE_ETM STREQUAL "1")
+    target_compile_definitions(${TARGET} PUBLIC TRACE_ETM)
+  endif ()
+
+  # LOGGER option
   if (DEFINED LOGGER)
     target_compile_definitions(${TARGET} PUBLIC LOGGER_${LOGGER})
+
+    # Add segger rtt to example
     if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt")
-      family_add_segger_rtt(${TARGET})
+      if (NOT TARGET segger_rtt)
+        add_library(segger_rtt STATIC ${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c)
+        target_include_directories(segger_rtt PUBLIC ${TOP}/lib/SEGGER_RTT/RTT)
+      endif()
+      target_link_libraries(${TARGET} PUBLIC segger_rtt)
     endif ()
   endif ()
-
-endfunction()
-
-
-# configure an executable target to link to tinyusb in device mode, and add the board implementation
-function(family_configure_device_example TARGET)
-  # default implementation is empty, the function should be redefined in the FAMILY/family.cmake
-endfunction()
-
-
-# configure an executable target to link to tinyusb in host mode, and add the board implementation
-function(family_configure_host_example TARGET)
-  # default implementation is empty, the function should be redefined in the FAMILY/family.cmake
 endfunction()
 
 
 # Add tinyusb to example
-function(family_add_tinyusb TARGET OPT_MCU)
+function(family_add_tinyusb TARGET OPT_MCU RTOS)
   # tinyusb target is built for each example since it depends on example's tusb_config.h
   set(TINYUSB_TARGET_PREFIX ${TARGET}-)
   add_library(${TARGET}-tinyusb_config INTERFACE)
 
+  # path to tusb_config.h
   target_include_directories(${TARGET}-tinyusb_config INTERFACE ${CMAKE_CURRENT_SOURCE_DIR}/src)
   target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_MCU=${OPT_MCU})
+
   if (DEFINED LOG)
     target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_DEBUG=${LOG})
   endif()
 
+  if (RTOS STREQUAL "freertos")
+    target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_OS=OPT_OS_FREERTOS)
+  endif ()
+
   # tinyusb's CMakeList.txt
   add_subdirectory(${TOP}/src ${CMAKE_CURRENT_BINARY_DIR}/tinyusb)
+
+  if (RTOS STREQUAL "freertos")
+    # link tinyusb with freeRTOS kernel
+    target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel)
+  endif ()
 endfunction()
 
 
-# Add freeRTOS support to example
-function(family_add_freertos TARGET)
-  # freeros config
-  if (NOT TARGET freertos_config)
-    add_library(freertos_config INTERFACE)
-    target_include_directories(freertos_config INTERFACE
-      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/${FAMILY}/FreeRTOSConfig
-      )
-    # add board definition to freertos_config mostly for SystemCoreClock
-    target_link_libraries(freertos_config INTERFACE board_${BOARD})
-  endif()
+# Add bin/hex output
+function(family_add_bin_hex TARGET)
+  add_custom_command(TARGET ${TARGET} POST_BUILD
+    COMMAND ${CMAKE_OBJCOPY} -Obinary $<TARGET_FILE:${TARGET}> $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.bin
+    COMMAND ${CMAKE_OBJCOPY} -Oihex $<TARGET_FILE:${TARGET}> $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.hex
+    VERBATIM)
+endfunction()
 
-  # freertos kernel should be generic as freertos_config however, CMAKE complains with missing variable
-  # such as CMAKE_C_COMPILE_OBJECT
-  if (NOT TARGET freertos_kernel)
-    add_subdirectory(${TOP}/lib/FreeRTOS-Kernel ${CMAKE_BINARY_DIR}/lib/freertos_kernel)
-  endif ()
 
-  # Add FreeRTOS option to tinyusb_config
-  target_compile_definitions(${TARGET}-tinyusb_config INTERFACE
-    CFG_TUSB_OS=OPT_OS_FREERTOS
-    )
-  # link tinyusb with freeRTOS kernel
-  target_link_libraries(${TARGET}-tinyusb PUBLIC freertos_kernel)
-  target_link_libraries(${TARGET} PUBLIC freertos_kernel)
+#----------------------------------
+# Example Target Configure (Default rule)
+# These function can be redefined in FAMILY/family.cmake
+#----------------------------------
+
+function(family_configure_example TARGET RTOS)
+  # empty function, should be redefined in FAMILY/family.cmake
+endfunction()
+
+# Configure device example with RTOS
+function(family_configure_device_example TARGET RTOS)
+  family_configure_example(${TARGET} ${RTOS})
 endfunction()
 
 
+# Configure host example with RTOS
+function(family_configure_host_example TARGET RTOS)
+  family_configure_example(${TARGET} ${RTOS})
+endfunction()
+
+
+# Configure host + device example with RTOS
+function(family_configure_dual_usb_example TARGET RTOS)
+  family_configure_example(${TARGET} ${RTOS})
+endfunction()
+
+#----------------------------------
+# RPI specific: refactor later
+#----------------------------------
 function(family_add_default_example_warnings TARGET)
   target_compile_options(${TARGET} PUBLIC
     -Wall
@@ -272,16 +327,6 @@ function(family_add_default_example_warnings TARGET)
   endif()
 endfunction()
 
-
-# Add bin/hex output
-function(family_add_bin_hex TARGET)
-  add_custom_command(TARGET ${TARGET} POST_BUILD
-    COMMAND ${CMAKE_OBJCOPY} -Obinary $<TARGET_FILE:${TARGET}> $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.bin
-    COMMAND ${CMAKE_OBJCOPY} -Oihex $<TARGET_FILE:${TARGET}> $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.hex
-    VERBATIM)
-endfunction()
-
-
 #----------------------------------
 # Flashing target
 #----------------------------------
@@ -352,6 +397,10 @@ function(family_flash_nxplink TARGET)
 endfunction()
 
 
+#----------------------------------
+# Family specific
+#----------------------------------
+
 # family specific: can override above functions
 include(${CMAKE_CURRENT_LIST_DIR}/${FAMILY}/family.cmake)
 
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.cmake b/hw/bsp/imxrt/boards/metro_m7_1011/board.cmake
index 3ba95bf2c..99681ab12 100644
--- a/hw/bsp/imxrt/boards/metro_m7_1011/board.cmake
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.cmake
@@ -1,6 +1,6 @@
 set(MCU_VARIANT MIMXRT1011)
 
-set(JLINK_DEVICE MIMXRT1011DAE5A)
+set(JLINK_DEVICE MIMXRT1011xxx5A)
 set(PYOCD_TARGET mimxrt1010)
 set(NXPLINK_DEVICE MIMXRT1011xxxxx:EVK-MIMXRT1010)
 
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board.mk b/hw/bsp/imxrt/boards/metro_m7_1011/board.mk
index 89a459958..b845194c2 100644
--- a/hw/bsp/imxrt/boards/metro_m7_1011/board.mk
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board.mk
@@ -5,7 +5,7 @@ MCU_VARIANT = MIMXRT1011
 LD_FILE = $(BOARD_PATH)/$(BOARD).ld
 
 # For flash-jlink target
-JLINK_DEVICE = MIMXRT1011DAE5A
+JLINK_DEVICE = MIMXRT1011xxx5A
 
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1010
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c
new file mode 100644
index 000000000..1b28b668a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.c
@@ -0,0 +1,340 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1010-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: ADC_ALT_CLK.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true}
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5'}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK}
+- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL2.denom, value: '1'}
+- {id: CCM_ANALOG.PLL2.num, value: '0'}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
+    CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0);
+#endif
+    /* Disable ADC_ACLK_EN clock gate. */
+    CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK;
+    /* Set ADC_ACLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_AdcDiv, 11);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */
+    /* Set Pll3 SW clock source to use the USB1 PLL output. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Set safe value of the AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 1);
+    /* Set periph clock2 clock source to use the PLL3_SW_CLK. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h
new file mode 100644
index 000000000..119fd94bd
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/board/clock_config.h
@@ -0,0 +1,97 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK                40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT              500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY_CLK                 480000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex
new file mode 100644
index 000000000..606ec2cfc
--- /dev/null
+++ b/hw/bsp/imxrt/boards/metro_m7_1011/metro_m7_1011.mex
@@ -0,0 +1,692 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1010-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="f341eb24-9521-4127-8932-81692aeb76df" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1011xxxxx</processor>
+      <package>MIMXRT1011DAE5A</package>
+      <board>MIMXRT1010-EVK</board>
+      <board_revision>A</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPSPI1" description="Peripheral LPSPI1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="ARM" description="Peripheral ARM is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPSPI1" signal="SDI" pin_num="57" pin_signal="GPIO_AD_03"/>
+                  <pin peripheral="LPSPI1" signal="SDO" pin_num="56" pin_signal="GPIO_AD_04"/>
+                  <pin peripheral="LPSPI1" signal="SCK" pin_num="52" pin_signal="GPIO_AD_06"/>
+                  <pin peripheral="ARM" signal="TRACE, 0" pin_num="60" pin_signal="GPIO_AD_00"/>
+                  <pin peripheral="ARM" signal="TRACE, 1" pin_num="79" pin_signal="GPIO_13"/>
+                  <pin peripheral="ARM" signal="TRACE, 2" pin_num="80" pin_signal="GPIO_12"/>
+                  <pin peripheral="ARM" signal="TRACE, 3" pin_num="1" pin_signal="GPIO_11"/>
+                  <pin peripheral="ARM" signal="arm_trace_clk" pin_num="58" pin_signal="GPIO_AD_02"/>
+                  <pin peripheral="GPIO2" signal="gpio_io, 05" pin_num="70" pin_signal="GPIO_SD_05"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="11" pin_signal="GPIO_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RXD" pin_num="3" pin_signal="GPIO_09"/>
+                  <pin peripheral="LPUART1" signal="TXD" pin_num="2" pin_signal="GPIO_10"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="65" pin_signal="GPIO_SD_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="66" pin_signal="GPIO_SD_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="68" pin_signal="GPIO_SD_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="67" pin_signal="GPIO_SD_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="64" pin_signal="GPIO_SD_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="69" pin_signal="GPIO_SD_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLEDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO1" signal="gpiomux_io, 11" pin_num="1" pin_signal="GPIO_11">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="gpio_init_state" value="true"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitBUTTONPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO2" signal="gpio_io, 05" pin_num="70" pin_signal="GPIO_SD_05">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="gpio_interrupt" value="kGPIO_NoIntmode"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitCOMBO_SENSORPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="11" pin_signal="GPIO_02">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="12" pin_signal="GPIO_01">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="ADC_ALT_CLK.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CORE_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.ADC_ACLK_PODF.scale" value="12" locked="true"/>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="false"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM_ANALOG.ENET_500M_REF_CLK" locked="false"/>
+                  <setting id="CCM.SAI1_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.SAI3_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <dependencies>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="LPUART Driver not found in the toolchain/IDE project. Project will not compile!" problem_level="2" source="Peripherals">
+               <feature name="enabled" evaluation="equal">
+                  <data type="Boolean">true</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="Unsupported version of the LPUART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. Project might not compile correctly." problem_level="1" source="Peripherals">
+               <feature name="version" evaluation="equivalent">
+                  <data type="Version">2.5.1</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="igpio not found in the toolchain/IDE project. Project will not compile!" problem_level="2" source="Peripherals">
+               <feature name="enabled" evaluation="equal">
+                  <data type="Boolean">true</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Unsupported version of the igpio in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. Project might not compile correctly." problem_level="1" source="Peripherals">
+               <feature name="version" evaluation="equivalent">
+                  <data type="Version">2.0.1</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpspi" description="LPSPI Driver not found in the toolchain/IDE project. Project will not compile!" problem_level="2" source="Peripherals">
+               <feature name="enabled" evaluation="equal">
+                  <data type="Boolean">true</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpspi" description="Unsupported version of the LPSPI Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. Project might not compile correctly." problem_level="1" source="Peripherals">
+               <feature name="version" evaluation="greaterOrEqual">
+                  <data type="Version">2.0.3</data>
+               </feature>
+            </dependency>
+         </dependencies>
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="5e519eed-bd94-4950-84de-0f29de85bcea" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="ClockOutput" resourceId="UART_CLK_ROOT" description="UART_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="frequency" evaluation="greaterThan">
+                        <data type="Frequency" unit="Hz">0</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_tx" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="equal">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_rx" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="equal">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPSPI1.lpspi_sck" description="Signal serial clock is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPSPI1.lpspi_sin" description="Signal serial data input is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPSPI1.lpspi_sout" description="Signal serial data output is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="ClockOutput" resourceId="LPSPI_CLK_ROOT" description="LPSPI_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="frequency" evaluation="greaterThan">
+                        <data type="Frequency" unit="Hz">0</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <instances>
+                  <instance name="COMBO_SENSOR" uuid="2342e373-ea2e-4bed-8aa4-bd33509155f6" type="lpi2c" type_id="lpi2c_6b71962515c3208facfccd030afebc98" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="BOARD_BootClockRUN"/>
+                     </config_set>
+                     <config_set name="interrupt_vector"/>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="0d9274fe-8f49-48a8-8e6a-8c3ac009384d" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_BUTTON" uuid="6c9e57cc-d98c-4f6d-bf94-3920a8fd474e" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO2" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO2_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_LED" uuid="0f7a142d-ad6c-4e47-a2a3-015e90afa37b" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO1" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO1_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO1_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="1f9167f9-b5d4-4014-bb88-164f5cb5df38" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+                  <instance name="LPSPI1" uuid="de6f91ec-e184-4998-995c-9c22586a5529" type="lpspi" type_id="lpspi_6e21a1e0a09f0a012d683c4f91752db8" mode="polling" peripheral="LPSPI1" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="main">
+                        <setting name="mode" value="kLPSPI_Master"/>
+                        <setting name="clockSource" value="LpspiClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="master">
+                           <setting name="baudRate" value="400000"/>
+                           <setting name="bitsPerFrame" value="8"/>
+                           <setting name="cpol" value="kLPSPI_ClockPolarityActiveHigh"/>
+                           <setting name="cpha" value="kLPSPI_ClockPhaseFirstEdge"/>
+                           <setting name="direction" value="kLPSPI_MsbFirst"/>
+                           <setting name="pcsToSckDelayInNanoSec" value="1000"/>
+                           <setting name="lastSckToPcsDelayInNanoSec" value="1000"/>
+                           <setting name="betweenTransferDelayInNanoSec" value="1000"/>
+                           <setting name="whichPcs" value="kLPSPI_Pcs0"/>
+                           <setting name="pcsActiveHighOrLow" value="kLPSPI_PcsActiveLow"/>
+                           <setting name="pinCfg" value="kLPSPI_SdiInSdoOut"/>
+                           <setting name="dataOutConfig" value="kLpspiDataOutRetained"/>
+                        </struct>
+                        <setting name="set_FifoWaterMarks" value="false"/>
+                        <struct name="fifoWaterMarks">
+                           <setting name="txWatermark" value="0"/>
+                           <setting name="rxWatermark" value="0"/>
+                        </struct>
+                        <setting name="allPcsPolarityEnable" value="false"/>
+                        <struct name="allPcsPolarity">
+                           <setting name="kLPSPI_Pcs1Active" value="kLPSPI_PcsActiveLow"/>
+                           <setting name="kLPSPI_Pcs2Active" value="kLPSPI_PcsActiveLow"/>
+                           <setting name="kLPSPI_Pcs3Active" value="kLPSPI_PcsActiveLow"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="991327ca-3ad0-49d1-aff3-37b7734338db" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="3e46e698-099c-4180-92f5-2af1abbb93a5" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="452cb7cf-ac6a-4f29-a940-5f049b272fb1" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="be6880f0-7c2d-4331-bd40-2163fb383fd7" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="0f82c647-4c11-4163-87a4-aca908bb012c" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="18436376-474a-425e-81c0-9aa48fcbccd6" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="5501650f-8266-4cab-aadb-7799f5079dfb" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake
index 3ba95bf2c..99681ab12 100644
--- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.cmake
@@ -1,6 +1,6 @@
 set(MCU_VARIANT MIMXRT1011)
 
-set(JLINK_DEVICE MIMXRT1011DAE5A)
+set(JLINK_DEVICE MIMXRT1011xxx5A)
 set(PYOCD_TARGET mimxrt1010)
 set(NXPLINK_DEVICE MIMXRT1011xxxxx:EVK-MIMXRT1010)
 
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk
index 17dc01cd9..488a56fdc 100644
--- a/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk
@@ -2,7 +2,7 @@ CFLAGS += -DCPU_MIMXRT1011DAE5A -DCFG_EXAMPLE_VIDEO_READONLY
 MCU_VARIANT = MIMXRT1011
 
 # For flash-jlink target
-JLINK_DEVICE = MIMXRT1011DAE5A
+JLINK_DEVICE = MIMXRT1011xxx5A
 
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1010
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c
new file mode 100644
index 000000000..6cd18c8c2
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.c
@@ -0,0 +1,351 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1011xxxxx
+package_id: MIMXRT1011DAE5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1010-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+
+// Suppress warning caused by mcu driver
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-parameter"
+#endif
+
+#include "fsl_iomuxc.h"
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: ADC_ALT_CLK.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CORE_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.ADC_ACLK_PODF.scale, value: '12', locked: true}
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5'}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM_ANALOG.ENET_500M_REF_CLK}
+- {id: CCM.SAI1_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.SAI3_CLK_SEL.sel, value: CCM_ANALOG.PLL3_PFD2_CLK}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL2.denom, value: '1'}
+- {id: CCM_ANALOG.PLL2.num, value: '0'}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config CORE to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 0);
+    CLOCK_SetMux(kCLOCK_FlexspiSrcMux, 0);
+#endif
+    /* Disable ADC_ACLK_EN clock gate. */
+    CCM->CSCMR2 &= ~CCM_CSCMR2_ADC_ACLK_EN_MASK;
+    /* Set ADC_ACLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_AdcDiv, 11);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* Set periph clock source to use the USB1 PLL output (PLL3_SW_CLK) temporarily. */
+    /* Set Pll3 SW clock source to use the USB1 PLL output. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Set safe value of the AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 1);
+    /* Set periph clock2 clock source to use the PLL3_SW_CLK. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set peripheral clock source (glitchless mux) to select the temporary core clock. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h
new file mode 100644
index 000000000..119fd94bd
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/board/clock_config.h
@@ -0,0 +1,97 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_ADC_ALT_CLK                40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CORE_CLK_ROOT              500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY_CLK                 480000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex
new file mode 100644
index 000000000..606ec2cfc
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1010_evk/mimxrt1010_evk.mex
@@ -0,0 +1,692 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1010-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="f341eb24-9521-4127-8932-81692aeb76df" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1011xxxxx</processor>
+      <package>MIMXRT1011DAE5A</package>
+      <board>MIMXRT1010-EVK</board>
+      <board_revision>A</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPSPI1" description="Peripheral LPSPI1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="ARM" description="Peripheral ARM is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPSPI1" signal="SDI" pin_num="57" pin_signal="GPIO_AD_03"/>
+                  <pin peripheral="LPSPI1" signal="SDO" pin_num="56" pin_signal="GPIO_AD_04"/>
+                  <pin peripheral="LPSPI1" signal="SCK" pin_num="52" pin_signal="GPIO_AD_06"/>
+                  <pin peripheral="ARM" signal="TRACE, 0" pin_num="60" pin_signal="GPIO_AD_00"/>
+                  <pin peripheral="ARM" signal="TRACE, 1" pin_num="79" pin_signal="GPIO_13"/>
+                  <pin peripheral="ARM" signal="TRACE, 2" pin_num="80" pin_signal="GPIO_12"/>
+                  <pin peripheral="ARM" signal="TRACE, 3" pin_num="1" pin_signal="GPIO_11"/>
+                  <pin peripheral="ARM" signal="arm_trace_clk" pin_num="58" pin_signal="GPIO_AD_02"/>
+                  <pin peripheral="GPIO2" signal="gpio_io, 05" pin_num="70" pin_signal="GPIO_SD_05"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="11" pin_signal="GPIO_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RXD" pin_num="3" pin_signal="GPIO_09"/>
+                  <pin peripheral="LPUART1" signal="TXD" pin_num="2" pin_signal="GPIO_10"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="65" pin_signal="GPIO_SD_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="66" pin_signal="GPIO_SD_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="68" pin_signal="GPIO_SD_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="67" pin_signal="GPIO_SD_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="64" pin_signal="GPIO_SD_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="69" pin_signal="GPIO_SD_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLEDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO1" signal="gpiomux_io, 11" pin_num="1" pin_signal="GPIO_11">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="gpio_init_state" value="true"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitBUTTONPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO2" signal="gpio_io, 05" pin_num="70" pin_signal="GPIO_SD_05">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="gpio_interrupt" value="kGPIO_NoIntmode"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitCOMBO_SENSORPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="11" pin_signal="GPIO_02">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="12" pin_signal="GPIO_01">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="ADC_ALT_CLK.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CORE_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.ADC_ACLK_PODF.scale" value="12" locked="true"/>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="false"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM_ANALOG.ENET_500M_REF_CLK" locked="false"/>
+                  <setting id="CCM.SAI1_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.SAI3_CLK_SEL.sel" value="CCM_ANALOG.PLL3_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="2.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <dependencies>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="LPUART Driver not found in the toolchain/IDE project. Project will not compile!" problem_level="2" source="Peripherals">
+               <feature name="enabled" evaluation="equal">
+                  <data type="Boolean">true</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpuart" description="Unsupported version of the LPUART Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. Project might not compile correctly." problem_level="1" source="Peripherals">
+               <feature name="version" evaluation="equivalent">
+                  <data type="Version">2.5.1</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="igpio not found in the toolchain/IDE project. Project will not compile!" problem_level="2" source="Peripherals">
+               <feature name="enabled" evaluation="equal">
+                  <data type="Boolean">true</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Unsupported version of the igpio in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. Project might not compile correctly." problem_level="1" source="Peripherals">
+               <feature name="version" evaluation="equivalent">
+                  <data type="Version">2.0.1</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpspi" description="LPSPI Driver not found in the toolchain/IDE project. Project will not compile!" problem_level="2" source="Peripherals">
+               <feature name="enabled" evaluation="equal">
+                  <data type="Boolean">true</data>
+               </feature>
+            </dependency>
+            <dependency resourceType="SWComponent" resourceId="platform.drivers.lpspi" description="Unsupported version of the LPSPI Driver in the toolchain/IDE project. Required: ${required_value}, actual: ${actual_value}. Project might not compile correctly." problem_level="1" source="Peripherals">
+               <feature name="version" evaluation="greaterOrEqual">
+                  <data type="Version">2.0.3</data>
+               </feature>
+            </dependency>
+         </dependencies>
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="5e519eed-bd94-4950-84de-0f29de85bcea" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="ClockOutput" resourceId="UART_CLK_ROOT" description="UART_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="frequency" evaluation="greaterThan">
+                        <data type="Frequency" unit="Hz">0</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_tx" description="Signal TX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="equal">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPUART1.uart_rx" description="Signal RX is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="equal">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPSPI1.lpspi_sck" description="Signal serial clock is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPSPI1.lpspi_sin" description="Signal serial data input is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PeripheralUnifiedSignal" resourceId="LPSPI1.lpspi_sout" description="Signal serial data output is not routed." problem_level="1" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="routed" evaluation="">
+                        <data type="Boolean">true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="ClockOutput" resourceId="LPSPI_CLK_ROOT" description="LPSPI_CLK_ROOT is inactive." problem_level="2" source="Peripherals:BOARD_InitPeripherals">
+                     <feature name="frequency" evaluation="greaterThan">
+                        <data type="Frequency" unit="Hz">0</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <instances>
+                  <instance name="COMBO_SENSOR" uuid="2342e373-ea2e-4bed-8aa4-bd33509155f6" type="lpi2c" type_id="lpi2c_6b71962515c3208facfccd030afebc98" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="BOARD_BootClockRUN"/>
+                     </config_set>
+                     <config_set name="interrupt_vector"/>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="0d9274fe-8f49-48a8-8e6a-8c3ac009384d" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_BUTTON" uuid="6c9e57cc-d98c-4f6d-bf94-3920a8fd474e" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO2" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO2_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_LED" uuid="0f7a142d-ad6c-4e47-a2a3-015e90afa37b" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO1" enabled="true" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO1_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO1_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="1f9167f9-b5d4-4014-bb88-164f5cb5df38" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+                  <instance name="LPSPI1" uuid="de6f91ec-e184-4998-995c-9c22586a5529" type="lpspi" type_id="lpspi_6e21a1e0a09f0a012d683c4f91752db8" mode="polling" peripheral="LPSPI1" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="main">
+                        <setting name="mode" value="kLPSPI_Master"/>
+                        <setting name="clockSource" value="LpspiClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="master">
+                           <setting name="baudRate" value="400000"/>
+                           <setting name="bitsPerFrame" value="8"/>
+                           <setting name="cpol" value="kLPSPI_ClockPolarityActiveHigh"/>
+                           <setting name="cpha" value="kLPSPI_ClockPhaseFirstEdge"/>
+                           <setting name="direction" value="kLPSPI_MsbFirst"/>
+                           <setting name="pcsToSckDelayInNanoSec" value="1000"/>
+                           <setting name="lastSckToPcsDelayInNanoSec" value="1000"/>
+                           <setting name="betweenTransferDelayInNanoSec" value="1000"/>
+                           <setting name="whichPcs" value="kLPSPI_Pcs0"/>
+                           <setting name="pcsActiveHighOrLow" value="kLPSPI_PcsActiveLow"/>
+                           <setting name="pinCfg" value="kLPSPI_SdiInSdoOut"/>
+                           <setting name="dataOutConfig" value="kLpspiDataOutRetained"/>
+                        </struct>
+                        <setting name="set_FifoWaterMarks" value="false"/>
+                        <struct name="fifoWaterMarks">
+                           <setting name="txWatermark" value="0"/>
+                           <setting name="rxWatermark" value="0"/>
+                        </struct>
+                        <setting name="allPcsPolarityEnable" value="false"/>
+                        <struct name="allPcsPolarity">
+                           <setting name="kLPSPI_Pcs1Active" value="kLPSPI_PcsActiveLow"/>
+                           <setting name="kLPSPI_Pcs2Active" value="kLPSPI_PcsActiveLow"/>
+                           <setting name="kLPSPI_Pcs3Active" value="kLPSPI_PcsActiveLow"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="991327ca-3ad0-49d1-aff3-37b7734338db" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="3e46e698-099c-4180-92f5-2af1abbb93a5" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="452cb7cf-ac6a-4f29-a940-5f049b272fb1" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="be6880f0-7c2d-4331-bd40-2163fb383fd7" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="0f82c647-4c11-4163-87a4-aca908bb012c" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="18436376-474a-425e-81c0-9aa48fcbccd6" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="5501650f-8266-4cab-aadb-7799f5079dfb" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c
new file mode 100644
index 000000000..ae1aa7fb1
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.c
@@ -0,0 +1,357 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1015xxxxx
+package_id: MIMXRT1015DAF5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1015-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 2160/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 352/3 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '1', locked: true}
+- {id: CCM.CLKO2_SEL.sel, value: CCM.LPI2C_CLK_ROOT}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF}
+- {id: CCM.SEMC_PODF.scale, value: '2'}
+- {id: CCM.TRACE_PODF.scale, value: '3', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 0);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 1);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 2);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 2);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(6);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h
new file mode 100644
index 000000000..2acdb16a7
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/board/clock_config.h
@@ -0,0 +1,100 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               500000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           196363636UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             117333333UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex
new file mode 100644
index 000000000..431a59af7
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1015_evk/mimxrt1015_evk.mex
@@ -0,0 +1,576 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1015-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="4be4468a-3124-4ac9-9d4f-05d5f8ad6399" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1015xxxxx</processor>
+      <package>MIMXRT1015DAF5A</package>
+      <board>MIMXRT1015-EVK</board>
+      <board_revision>B</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="68" pin_signal="GPIO_AD_B0_07"/>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="72" pin_signal="GPIO_AD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="12" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="11" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="9" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="10" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="13" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="8" pin_signal="GPIO_SD_B1_11"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLEDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitLEDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO3" signal="gpio_io, 21" pin_num="21" pin_signal="GPIO_SD_B1_01">
+                     <pin_features>
+                        <pin_feature name="direction" value="OUTPUT"/>
+                        <pin_feature name="gpio_init_state" value="true"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitBUTTONPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="GPIO2" description="Peripheral GPIO2 is not initialized" problem_level="1" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.igpio" description="Pins initialization requires the IGPIO Driver in the project." problem_level="2" source="Pins:BOARD_InitBUTTONPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="GPIO2" signal="gpio_io, 09" pin_num="1" pin_signal="GPIO_EMC_09">
+                     <pin_features>
+                        <pin_feature name="direction" value="INPUT"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_4"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitCOMBO_SENSORPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCOMBO_SENSORPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="53" pin_signal="GPIO_AD_B1_14">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="52" pin_signal="GPIO_AD_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                        <pin_feature name="software_input_on" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="2160/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="352/3 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.CLKO2_SEL.sel" value="CCM.LPI2C_CLK_ROOT" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM.ARM_PODF" locked="false"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="2" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>N/A</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="57fc488c-a9f7-4a03-8ab3-5d2a3fd16a50" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="DEBUG_UART" uuid="600d7aee-5a2d-4373-9763-ce007b981c15" type="lpuart" type_id="lpuart_bebe3e12b6ec22bbd14199038f2bf459" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="COMBO_SENSOR" uuid="96f9e552-25e5-434a-9454-5cf9e614733d" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_LED" uuid="5592aac0-ced9-4284-88a8-bbeb5083a92f" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO3" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO3_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO3_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="USER_BUTTON" uuid="e7774953-3606-41b8-8b72-6e09025369e0" type="igpio" type_id="igpio_b1c1fa279aa7069dca167502b8589cb7" mode="GPIO" peripheral="GPIO2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_gpio">
+                        <setting name="enable_irq_comb_0_15" value="false"/>
+                        <struct name="gpio_interrupt_comb_0_15">
+                           <setting name="IRQn" value="GPIO2_Combined_0_15_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                        <setting name="enable_irq_comb_16_31" value="false"/>
+                        <struct name="gpio_interrupt_comb_16_31">
+                           <setting name="IRQn" value="GPIO2_Combined_16_31_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="0329fbca-00e5-4ec4-9f79-3cb65a7b267a" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="59cf1b09-8396-4bf9-bed6-03d5457c292f" type_id="system_54b53072540eeeb8f8e9343e71f28176">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="7d589e9f-7522-408c-b7c8-42770920766f" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="e9da5e16-1f55-49be-87ec-af8cfd4a4105" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="9dc7a034-9408-4852-9990-a713693635ee" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="28ec81a8-d7ea-4363-9330-20b877c481f6" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="774dd0a0-63ed-4846-b9d7-dfd082d810e3" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="77cd333e-4adc-4c6e-8b18-bbe349d78182" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>N/A</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake
index 1696dc987..39c94147c 100644
--- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.cmake
@@ -1,6 +1,6 @@
 set(MCU_VARIANT MIMXRT1021)
 
-set(JLINK_DEVICE MIMXRT1021DAG5A)
+set(JLINK_DEVICE MIMXRT1021xxx5A)
 set(PYOCD_TARGET mimxrt1020)
 set(NXPLINK_DEVICE MIMXRT1021xxxxx:EVK-MIMXRT1020)
 
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk
index b15da1b67..e269c8ac5 100644
--- a/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk
@@ -2,7 +2,7 @@ CFLAGS += -DCPU_MIMXRT1021DAG5A
 MCU_VARIANT = MIMXRT1021
 
 # For flash-jlink target
-JLINK_DEVICE = MIMXRT1021DAG5A
+JLINK_DEVICE = MIMXRT1021xxx5A
 
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1020
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c
new file mode 100644
index 000000000..764042928
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.c
@@ -0,0 +1,421 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1021xxxxx
+package_id: MIMXRT1021DAG5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1020-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 176 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 176 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL2_PFD2_CLK}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM.USDHC1_PODF.scale, value: '3', locked: true}
+- {id: CCM.USDHC2_PODF.scale, value: '3', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_ENET_ENABLE_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput = false,                 /* Disable the PLL providing the ENET 125MHz reference clock */
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .enableClkOutput25M = false,              /* Disable the PLL providing the ENET 25MHz reference clock */
+        .loopDivider = 1,                         /* Set frequency of ethernet reference clock to 50 MHz */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 0);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 2);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 2);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 2);
+#endif
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(3);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK)
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK;
+#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK)
+    /* Backward compatibility for original bitfield name */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+#else
+#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined."
+#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h
new file mode 100644
index 000000000..d678a4f66
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/board/clock_config.h
@@ -0,0 +1,108 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               500000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           0UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              62500000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            176000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            176000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex
new file mode 100644
index 000000000..4ddaaed77
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1020_evk/mimxrt1020_evk.mex
@@ -0,0 +1,597 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1020-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="a558cc6e-82c2-41f9-9f55-0348efc7896f" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1021xxxxx</processor>
+      <package>MIMXRT1021DAG5A</package>
+      <board>MIMXRT1020-EVK</board>
+      <board_revision>A3</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <external_user_signals>
+               <properties/>
+            </external_user_signals>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="101" pin_signal="GPIO_AD_B0_07"/>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="105" pin_signal="GPIO_AD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="142" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="141" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="140" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="139" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="138" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="136" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="137" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="133" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="132" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="131" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="143" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="130" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="129" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="2" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="1" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="7" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="127" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="126" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="3" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="8" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="4" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="128" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="125" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="9" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="117" pin_signal="GPIO_EMC_39"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="118" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="119" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="120" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="122" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="121" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="123" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="124" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="10" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="12" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="13" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="14" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="15" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="16" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="17" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="18" pin_signal="GPIO_EMC_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN1" description="Peripheral CAN1 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN1" signal="RX" pin_num="32" pin_signal="GPIO_SD_B1_01"/>
+                  <pin peripheral="CAN1" signal="TX" pin_num="33" pin_signal="GPIO_SD_B1_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="97" pin_signal="GPIO_AD_B0_11"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 22" pin_num="84" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="107" pin_signal="GPIO_AD_B0_04"/>
+                  <pin peripheral="ENET" signal="enet_tx_clk" pin_num="100" pin_signal="GPIO_AD_B0_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="95" pin_signal="GPIO_AD_B0_13"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="93" pin_signal="GPIO_AD_B0_15"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="94" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="96" pin_signal="GPIO_AD_B0_12"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="99" pin_signal="GPIO_AD_B0_09"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="98" pin_signal="GPIO_AD_B0_10"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="116" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="115" pin_signal="GPIO_EMC_41"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="45" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="46" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="43" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="42" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="48" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="47" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="GPIO3" signal="gpio_io, 19" pin_num="41" pin_signal="GPIO_SD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="24" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="23" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="21" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="22" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="25" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="19" pin_signal="GPIO_SD_B1_11"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL2_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM.ARM_PODF" locked="false"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.USDHC1_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM.USDHC2_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENABLE_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/dcd.c" update_enabled="true"/>
+            <file path="board/dcd.h" update_enabled="true"/>
+         </generated_project_files>
+         <dcdx_profile>
+            <processor_version>13.0.2</processor_version>
+            <output_format>c_array</output_format>
+         </dcdx_profile>
+         <dcdx_configurations>
+            <dcdx_configuration name="Device_configuration">
+               <description></description>
+               <options/>
+               <command_groups/>
+            </dcdx_configuration>
+         </dcdx_configurations>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="6d394465-bc9b-47f2-9a1f-3ca61f76d27b" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="d0b30ebd-b05e-42b2-8e94-40b1625c2dba" type="flexcan" type_id="flexcan_10d80efac19b25dcd240244aae88dca0" mode="interrupts" peripheral="CAN1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="wakeupSrc" value="kFLEXCAN_WakeupSrcUnfiltered"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableTimerSync" value="true"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="27a94726-61ef-42ac-b517-d1eda3853dfe" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="e2a4cccd-cb23-4714-8c90-022fcf6146e8" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="bd191d83-2cb2-40ed-a718-47b39d772006" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="d097438f-179b-43e0-b37c-aee31212cebd" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="d84400f7-fd84-4466-908a-04abca190ef6" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="4f0123a9-0338-4076-b275-b49951642704" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="18150193-6d2b-469f-88e5-4908669bf3e5" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="602159e8-d65b-45d3-b63b-cd33be549134" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="eb963b89-5367-4d86-8885-82b4b8cff735" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+      <common name="common" version="1.0" enabled="true" update_project_code="true">
+         <core name="core0" role="primary" project_name="Project"/>
+      </common>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake
index 7011fec9b..45487d148 100644
--- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.cmake
@@ -1,6 +1,6 @@
 set(MCU_VARIANT MIMXRT1024)
 
-set(JLINK_DEVICE MIMXRT1024DAG5A)
+set(JLINK_DEVICE MIMXRT1024xxx5A)
 set(PYOCD_TARGET mimxrt1024)
 set(NXPLINK_DEVICE MIMXRT1024xxxxx:MIMXRT1024-EVK)
 
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk
index 92209992d..3c325cc93 100644
--- a/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board.mk
@@ -5,7 +5,7 @@ MCU_VARIANT = MIMXRT1024
 CFLAGS += -Wno-error=array-bounds
 
 # For flash-jlink target
-JLINK_DEVICE = MIMXRT1024DAG5A
+JLINK_DEVICE = MIMXRT1024xxx5A
 
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1024
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c
new file mode 100644
index 000000000..ba0cadafa
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.c
@@ -0,0 +1,421 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1024xxxxx
+package_id: MIMXRT1024DAG5A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1024-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 500 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: ENET_500M_REF_CLK.outFreq, value: 500 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 62.5 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 125 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 62.5 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 176 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 176 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '1', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '4', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL2_PFD2_CLK}
+- {id: CCM.IPG_PODF.scale, value: '4'}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.PRE_PERIPH_CLK_SEL.sel, value: CCM.ARM_PODF}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM.USDHC1_PODF.scale, value: '3', locked: true}
+- {id: CCM.USDHC2_PODF.scale, value: '3', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD2_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD2_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL2_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL2_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '22', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL3_PFD3_DIV.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD3_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL6_BYPASS.sel, value: CCM_ANALOG.PLL6}
+- {id: CCM_ANALOG_PLL_ENET_ENABLE_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG, value: Disabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN =
+    {
+        .enableClkOutput = false,                 /* Disable the PLL providing the ENET 125MHz reference clock */
+        .enableClkOutput500M = true,              /* Enable the PLL providing the ENET 500MHz reference clock */
+        .enableClkOutput25M = false,              /* Disable the PLL providing the ENET 25MHz reference clock */
+        .loopDivider = 1,                         /* Set frequency of ethernet reference clock to 50 MHz */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.25V. It is necessary to config AHB to 500Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x12);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 0);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 2);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 2);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 3);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 2);
+#endif
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 18);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 18);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 22);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 18);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Enet PLL. */
+    CLOCK_InitEnetPll(&enetPllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(3);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK)
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK;
+#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK)
+    /* Backward compatibility for original bitfield name */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+#else
+#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined."
+#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h
new file mode 100644
index 000000000..d678a4f66
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/board/clock_config.h
@@ -0,0 +1,108 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             500000000U  /*!< Core clock frequency: 500000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               500000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           0UL
+#define BOARD_BOOTCLOCKRUN_ENET_500M_REF_CLK          500000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           132000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      62500000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               125000000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            62500000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              62500000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            176000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            176000000UL
+
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Enet PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_enet_pll_config_t enetPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex
new file mode 100644
index 000000000..2aa55a604
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1024_evk/mimxrt1024_evk.mex
@@ -0,0 +1,503 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1024-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="a558cc6e-82c2-41f9-9f55-0348efc7896f" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1024xxxxx</processor>
+      <package>MIMXRT1024DAG5A</package>
+      <board>MIMXRT1024-EVK</board>
+      <board_revision>B1</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <power_domains>
+               <power_domain name="NVCC_GPIO" value="3.3"/>
+            </power_domains>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="101" pin_signal="GPIO_AD_B0_07"/>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="105" pin_signal="GPIO_AD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="142" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="141" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="140" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="139" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="138" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="136" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="137" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="133" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="132" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="131" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="143" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="130" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="129" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="2" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="1" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="7" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="127" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="126" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="3" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="8" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="4" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="128" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="125" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="9" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="117" pin_signal="GPIO_EMC_39"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="118" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="119" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="120" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="122" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="121" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="123" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="124" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="10" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="12" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="13" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="14" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="15" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="16" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="17" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="18" pin_signal="GPIO_EMC_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN1" description="Peripheral CAN1 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN1" signal="RX" pin_num="32" pin_signal="GPIO_SD_B1_01"/>
+                  <pin peripheral="CAN1" signal="TX" pin_num="33" pin_signal="GPIO_SD_B1_00"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="97" pin_signal="GPIO_AD_B0_11"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 22" pin_num="84" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="107" pin_signal="GPIO_AD_B0_04"/>
+                  <pin peripheral="ENET" signal="enet_tx_clk" pin_num="100" pin_signal="GPIO_AD_B0_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="95" pin_signal="GPIO_AD_B0_13"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="93" pin_signal="GPIO_AD_B0_15"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="94" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="96" pin_signal="GPIO_AD_B0_12"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="99" pin_signal="GPIO_AD_B0_09"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="98" pin_signal="GPIO_AD_B0_10"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="116" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="115" pin_signal="GPIO_EMC_41"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="45" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="46" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="43" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="42" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="48" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="47" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="GPIO3" signal="gpio_io, 19" pin_num="41" pin_signal="GPIO_SD_B0_06"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="24" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="23" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="21" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="22" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="25" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="19" pin_signal="GPIO_SD_B1_11"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_500M_REF_CLK.outFreq" value="500 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="125 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="62.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="176 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL2_PFD2_CLK" locked="false"/>
+                  <setting id="CCM.IPG_PODF.scale" value="4" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.PRE_PERIPH_CLK_SEL.sel" value="CCM.ARM_PODF" locked="false"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.USDHC1_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM.USDHC2_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="22" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_DIV.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL6_BYPASS.sel" value="CCM_ANALOG.PLL6" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENABLE_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_CFG" value="Disabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/dcd.c" update_enabled="true"/>
+            <file path="board/dcd.h" update_enabled="true"/>
+         </generated_project_files>
+         <dcdx_profile>
+            <processor_version>13.0.2</processor_version>
+            <output_format>c_array</output_format>
+         </dcdx_profile>
+         <dcdx_configurations>
+            <dcdx_configuration name="Device_configuration">
+               <description></description>
+               <options/>
+               <command_groups/>
+            </dcdx_configuration>
+         </dcdx_configurations>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="6d394465-bc9b-47f2-9a1f-3ca61f76d27b" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="NVIC" uuid="096e7e36-6917-481a-a4c5-06822cfc2da4" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="5dc935cc-5865-4d50-bac9-89ad440a12ee" type_id="system_54b53072540eeeb8f8e9343e71f28176">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="c2fe99b8-bf9b-437f-9446-a35000b06679" type_id="msg_6e2baaf3b97dbeef01c0043275f9a0e7">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="generic_uart" uuid="eca93ea1-cadf-4247-bfdc-08769ef8ed12" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="fdf82c69-a73f-4f32-9699-457260453bc6" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="af80d7a8-d163-4a6f-839d-0ce2b15abffd" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="dca6ee55-a78d-4884-99bd-4f821b552213" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="4c34638b-b184-4e9d-8a81-5f3a1287180a" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>N/A</processor_version>
+         </tee_profile>
+      </tee>
+      <common name="common" version="1.0" enabled="true" update_project_code="true">
+         <core name="core0" role="primary" project_name="Project"/>
+      </common>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk
index 9fd229105..60aa1e28f 100644
--- a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk
@@ -1,6 +1,8 @@
 CFLAGS += -DCPU_MIMXRT1052DVL6B
 MCU_VARIANT = MIMXRT1052
 
+JLINK_DEVICE = MIMXRT1052xxxxB
+
 # For flash-pyocd target
 PYOCD_TARGET = mimxrt1050
 
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c
new file mode 100644
index 000000000..9738c6350
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.c
@@ -0,0 +1,495 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1052xxxxB
+package_id: MIMXRT1052DVL6B
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: IMXRT1050-EVKB
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 160 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_PODF.scale, value: '3', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM.PLL3_SW_CLK_SEL}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '40'}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2'}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4'}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 40,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 2);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 1);
+#endif
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(40);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+#if defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK)
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK;
+#elif defined(IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK)
+    /* Backward compatibility for original bitfield name */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+#else
+#error "Neither IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK nor IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK is defined."
+#endif /* defined(IOMUXC_GPR_GPR1_ENET_REF_CLK_DIR_MASK) */
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h
new file mode 100644
index 000000000..6b4264bf2
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/board/clock_config.h
@@ -0,0 +1,119 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           160000000UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex
new file mode 100644
index 000000000..c0a5b5660
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1050_evkb/mimxrt1050_evkb.mex
@@ -0,0 +1,1001 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="IMXRT1050-EVKB" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="789fd1d3-821c-40a6-b04d-44ccc5a5d158" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1052xxxxB</processor>
+      <package>MIMXRT1052DVL6B</package>
+      <board>IMXRT1050-EVKB</board>
+      <board_revision>A</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CSX, 0" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitHyperFlashPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitHyperFlashPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitHyperFlashPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitHyperFlashPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA3" pin_num="L5" pin_signal="GPIO_SD_B1_00"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA2" pin_num="M5" pin_signal="GPIO_SD_B1_01"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA1" pin_num="M3" pin_signal="GPIO_SD_B1_02"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_DATA0" pin_num="M4" pin_signal="GPIO_SD_B1_03"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_B_SCLK" pin_num="P2" pin_signal="GPIO_SD_B1_04"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="160 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="3" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM.PLL3_SW_CLK_SEL" locked="false"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="40" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="a7525270-2da6-4556-8d91-4ab9d0edc0e2" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="cb1fcaec-81fe-4d3e-a079-a7d2819d6075" type="flexcan" type_id="flexcan_10d80efac19b25dcd240244aae88dca0" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="wakeupSrc" value="kFLEXCAN_WakeupSrcUnfiltered"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableTimerSync" value="true"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="da865a46-3511-4001-8bb0-5249c52b0e4d" type="csi" type_id="csi_b2cf1faba8074e676ac4be93ec552c5a" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="47051ef3-2c25-4648-8f79-4ae87cd12674" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="64741c26-6183-46d0-8bfe-02a92aa90e05" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="8bf370a5-e797-45e8-b8c4-629c84c62843" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="2"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="687e3f12-1330-4ff9-8138-6aaf372d3e22" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="17c5d0d5-726a-40f6-a434-b121e9798a55" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="4a40b9b1-b64b-41b7-8ba7-728cda5039cd" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="c8d21d99-3f5e-47f2-aba7-0588ad4c2132" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="dfa0bda9-5863-49b3-9482-3ee85a2b93f0" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="3358d4d0-14d8-4ca7-9c13-378a0dc7f9a2" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="65c68c04-c4f4-4fbc-8c15-452d53d79fe6" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="99f59d06-c3df-407a-856a-22072ef95a98" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+      <common name="common" version="1.0" enabled="true" update_project_code="true">
+         <core name="core0" role="primary" project_name="Project"/>
+      </common>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c
new file mode 100644
index 000000000..c55e0135a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.c
@@ -0,0 +1,509 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex
new file mode 100644
index 000000000..39b3ed606
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1060_evk/mimxrt1060_evk.mex
@@ -0,0 +1,1001 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1060-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="2174caba-38fe-48d5-8f89-42a23354d23b" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1062xxxxA</processor>
+      <package>MIMXRT1062DVL6A</package>
+      <board>MIMXRT1060-EVK</board>
+      <board_revision>A2</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="E1" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="B7" pin_signal="GPIO_EMC_39"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 02" pin_num="M11" pin_signal="GPIO_AD_B0_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="96c1cec6-3bd3-47a2-8301-f38e4b0dd25f" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="eb0900eb-d552-4097-9dcf-a07e592a887f" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="f67d9a64-c26d-4421-9805-a062b24146f2" type="csi" type_id="csi_3739ec1355c7b915be929f3b7e35095b" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="f2c6cd0a-751c-4424-9248-a4d98da47de7" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="01f250e2-83d7-4b7b-a98d-772d1c3bdb42" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="90a0c31d-6042-4687-af0f-0892536bc1ba" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="3"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="b31fa225-2a52-486b-9c5c-33a184a2c716" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="aa3cc953-557b-4557-b7fe-6fedc31acf98" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="8b3f852e-ee1e-45e9-abff-0ff722f1d65d" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="539d282e-5136-4289-9058-9a46b221ca45" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="6e4c02c4-0524-4905-91b5-01d2e2502186" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c6d8fd36-2bbd-44c6-a160-54e7e12d0807" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="7d3626d3-4536-4838-a35d-3b8cf5a2bd71" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="738ea8df-6176-4e52-b4c7-b88aa9c17d13" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c
new file mode 100644
index 000000000..778ab02f2
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.c
@@ -0,0 +1,511 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1064xxxxA
+package_id: MIMXRT1064DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1064-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD1_DIV.scale, value: '16', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+    /* In SDK projects, external flash (configured by FLEXSPI2) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI2 clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI2, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+#endif
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI2) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI2 clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI2, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex
new file mode 100644
index 000000000..5e0fc72d3
--- /dev/null
+++ b/hw/bsp/imxrt/boards/mimxrt1064_evk/mimxrt1064_evk.mex
@@ -0,0 +1,1006 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1064-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="d75e55f6-68ab-46ef-814b-b94593af7f06" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1064xxxxA</processor>
+      <package>MIMXRT1064DVL6A</package>
+      <board>MIMXRT1064-EVK</board>
+      <board_revision>1</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>true</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="E1" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="B7" pin_signal="GPIO_EMC_39"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 02" pin_num="M11" pin_signal="GPIO_AD_B0_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_DIV.scale" value="16" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="1c6563a6-c68b-40e5-8828-2853c99f95fa" called_from_default_init="true" id_prefix="BOARD_" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="e311ffe2-a68e-4ccc-bab1-c97e2207c5f0" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="7b69310c-fa35-4379-ac89-358df9280646" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_RGB565" uuid="ae342c96-df71-41a3-8419-3cccf201c91e" type="csi" type_id="csi_20660d007fd9c28a0b6ec615663d2939" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="BOARD_BootClockRUN"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected>
+                                 <id>kCSI_HsyncActiveHigh</id>
+                                 <id>kCSI_VsyncActiveLow</id>
+                              </selected>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="81411659-def5-4dbf-839a-d5e5f32dec0b" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t" quick_selection="QuickSelection1">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD_RGB565" uuid="8c491814-4517-44d9-95de-844144e0c6b5" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="2"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="352dfcca-72ab-4214-bb68-9c1a927c4922" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="fe5e46a0-17b8-41e8-9cbc-ffb6f1cf78c1" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="f79f6878-69b5-4063-9007-0b8e509f7274" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="7ce8b24b-29e6-4b69-86e5-bdfd641cef44" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="ef6a8ae2-3961-4a05-a37f-d42a6a4d8a56" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="00a2a52b-0c40-4dbf-a6d0-5257cfc384e0" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="f30f7e21-6805-4236-9ab3-ff06a6013fa1" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="ea574324-8cc3-4da3-bdfc-2bdba0dfc3df" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c
new file mode 100644
index 000000000..c55e0135a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.c
@@ -0,0 +1,509 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/teensy_40/teensy40.mex b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex
new file mode 100644
index 000000000..39b3ed606
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_40/teensy40.mex
@@ -0,0 +1,1001 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1060-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="2174caba-38fe-48d5-8f89-42a23354d23b" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1062xxxxA</processor>
+      <package>MIMXRT1062DVL6A</package>
+      <board>MIMXRT1060-EVK</board>
+      <board_revision>A2</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="E1" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="B7" pin_signal="GPIO_EMC_39"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 02" pin_num="M11" pin_signal="GPIO_AD_B0_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="96c1cec6-3bd3-47a2-8301-f38e4b0dd25f" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="eb0900eb-d552-4097-9dcf-a07e592a887f" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="f67d9a64-c26d-4421-9805-a062b24146f2" type="csi" type_id="csi_3739ec1355c7b915be929f3b7e35095b" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="f2c6cd0a-751c-4424-9248-a4d98da47de7" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="01f250e2-83d7-4b7b-a98d-772d1c3bdb42" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="90a0c31d-6042-4687-af0f-0892536bc1ba" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="3"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="b31fa225-2a52-486b-9c5c-33a184a2c716" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="aa3cc953-557b-4557-b7fe-6fedc31acf98" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="8b3f852e-ee1e-45e9-abff-0ff722f1d65d" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="539d282e-5136-4289-9058-9a46b221ca45" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="6e4c02c4-0524-4905-91b5-01d2e2502186" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c6d8fd36-2bbd-44c6-a160-54e7e12d0807" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="7d3626d3-4536-4838-a35d-3b8cf5a2bd71" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="738ea8df-6176-4e52-b4c7-b88aa9c17d13" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c
new file mode 100644
index 000000000..c55e0135a
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.c
@@ -0,0 +1,509 @@
+/*
+ * How to setup clock using clock driver functions:
+ *
+ * 1. Call CLOCK_InitXXXPLL() to configure corresponding PLL clock.
+ *
+ * 2. Call CLOCK_InitXXXpfd() to configure corresponding PLL pfd clock.
+ *
+ * 3. Call CLOCK_SetMux() to configure corresponding clock source for target clock out.
+ *
+ * 4. Call CLOCK_SetDiv() to configure corresponding clock divider for target clock out.
+ *
+ * 5. Call CLOCK_SetXtalFreq() to set XTAL frequency based on board settings.
+ *
+ */
+
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!GlobalInfo
+product: Clocks v11.0
+processor: MIMXRT1062xxxxA
+package_id: MIMXRT1062DVL6A
+mcu_data: ksdk2_0
+processor_version: 13.0.2
+board: MIMXRT1060-EVK
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+#include "clock_config.h"
+#include "fsl_iomuxc.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+void BOARD_InitBootClocks(void)
+{
+    BOARD_BootClockRUN();
+}
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/* TEXT BELOW IS USED AS SETTING FOR TOOLS *************************************
+!!Configuration
+name: BOARD_BootClockRUN
+called_from_default_init: true
+outputs:
+- {id: AHB_CLK_ROOT.outFreq, value: 600 MHz}
+- {id: CAN_CLK_ROOT.outFreq, value: 40 MHz}
+- {id: CKIL_SYNC_CLK_ROOT.outFreq, value: 32.768 kHz}
+- {id: CLK_1M.outFreq, value: 1 MHz}
+- {id: CLK_24M.outFreq, value: 24 MHz}
+- {id: CSI_CLK_ROOT.outFreq, value: 12 MHz}
+- {id: ENET2_125M_CLK.outFreq, value: 1.2 MHz}
+- {id: ENET_125M_CLK.outFreq, value: 2.4 MHz}
+- {id: ENET_25M_REF_CLK.outFreq, value: 1.2 MHz}
+- {id: FLEXIO1_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXIO2_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: FLEXSPI2_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: FLEXSPI_CLK_ROOT.outFreq, value: 1440/11 MHz}
+- {id: GPT1_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: GPT2_ipg_clk_highfreq.outFreq, value: 75 MHz}
+- {id: IPG_CLK_ROOT.outFreq, value: 150 MHz}
+- {id: LCDIF_CLK_ROOT.outFreq, value: 67.5 MHz}
+- {id: LPI2C_CLK_ROOT.outFreq, value: 60 MHz}
+- {id: LPSPI_CLK_ROOT.outFreq, value: 105.6 MHz}
+- {id: LVDS1_CLK.outFreq, value: 1.2 GHz}
+- {id: MQS_MCLK.outFreq, value: 1080/17 MHz}
+- {id: PERCLK_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: PLL7_MAIN_CLK.outFreq, value: 480 MHz}
+- {id: SAI1_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK2.outFreq, value: 1080/17 MHz}
+- {id: SAI1_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI2_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI2_MCLK3.outFreq, value: 30 MHz}
+- {id: SAI3_CLK_ROOT.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK1.outFreq, value: 1080/17 MHz}
+- {id: SAI3_MCLK3.outFreq, value: 30 MHz}
+- {id: SEMC_CLK_ROOT.outFreq, value: 75 MHz}
+- {id: SPDIF0_CLK_ROOT.outFreq, value: 30 MHz}
+- {id: TRACE_CLK_ROOT.outFreq, value: 132 MHz}
+- {id: UART_CLK_ROOT.outFreq, value: 80 MHz}
+- {id: USBPHY1_CLK.outFreq, value: 480 MHz}
+- {id: USBPHY2_CLK.outFreq, value: 480 MHz}
+- {id: USDHC1_CLK_ROOT.outFreq, value: 198 MHz}
+- {id: USDHC2_CLK_ROOT.outFreq, value: 198 MHz}
+settings:
+- {id: CCM.AHB_PODF.scale, value: '1', locked: true}
+- {id: CCM.ARM_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI2_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.FLEXSPI_PODF.scale, value: '2', locked: true}
+- {id: CCM.FLEXSPI_SEL.sel, value: CCM_ANALOG.PLL3_PFD0_CLK}
+- {id: CCM.LCDIF_PODF.scale, value: '4', locked: true}
+- {id: CCM.LCDIF_PRED.scale, value: '2', locked: true}
+- {id: CCM.LPSPI_PODF.scale, value: '5', locked: true}
+- {id: CCM.PERCLK_PODF.scale, value: '2', locked: true}
+- {id: CCM.SEMC_PODF.scale, value: '8'}
+- {id: CCM.TRACE_CLK_SEL.sel, value: CCM_ANALOG.PLL2_MAIN_CLK}
+- {id: CCM.TRACE_PODF.scale, value: '4', locked: true}
+- {id: CCM_ANALOG.PLL1_BYPASS.sel, value: CCM_ANALOG.PLL1}
+- {id: CCM_ANALOG.PLL1_PREDIV.scale, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL1_VDIV.scale, value: '50', locked: true}
+- {id: CCM_ANALOG.PLL2.denom, value: '1', locked: true}
+- {id: CCM_ANALOG.PLL2.num, value: '0', locked: true}
+- {id: CCM_ANALOG.PLL2_BYPASS.sel, value: CCM_ANALOG.PLL2_OUT_CLK}
+- {id: CCM_ANALOG.PLL2_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD0}
+- {id: CCM_ANALOG.PLL2_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD1}
+- {id: CCM_ANALOG.PLL2_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD2}
+- {id: CCM_ANALOG.PLL2_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL2_PFD3}
+- {id: CCM_ANALOG.PLL3_BYPASS.sel, value: CCM_ANALOG.PLL3}
+- {id: CCM_ANALOG.PLL3_PFD0_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD0}
+- {id: CCM_ANALOG.PLL3_PFD0_DIV.scale, value: '33', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD0_MUL.scale, value: '18', locked: true}
+- {id: CCM_ANALOG.PLL3_PFD1_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD1}
+- {id: CCM_ANALOG.PLL3_PFD2_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD2}
+- {id: CCM_ANALOG.PLL3_PFD3_BYPASS.sel, value: CCM_ANALOG.PLL3_PFD3}
+- {id: CCM_ANALOG.PLL4.denom, value: '50'}
+- {id: CCM_ANALOG.PLL4.div, value: '47'}
+- {id: CCM_ANALOG.PLL5.denom, value: '1'}
+- {id: CCM_ANALOG.PLL5.div, value: '31', locked: true}
+- {id: CCM_ANALOG.PLL5.num, value: '0'}
+- {id: CCM_ANALOG.PLL5_BYPASS.sel, value: CCM_ANALOG.PLL5_POST_DIV}
+- {id: CCM_ANALOG.PLL5_POST_DIV.scale, value: '2', locked: true}
+- {id: CCM_ANALOG.PLL7_BYPASS.sel, value: CCM_ANALOG.PLL7}
+- {id: CCM_ANALOG.VIDEO_DIV.scale, value: '4', locked: true}
+- {id: CCM_ANALOG_PLL_ENET_POWERDOWN_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB1_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG, value: Enabled}
+- {id: CCM_ANALOG_PLL_USB2_POWER_CFG, value: 'Yes'}
+- {id: CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG, value: 'No'}
+sources:
+- {id: XTALOSC24M.RTC_OSC.outFreq, value: 32.768 kHz, enabled: true}
+ * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/
+
+/*******************************************************************************
+ * Variables for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 100,                       /* PLL loop divider, Fout = Fin * 50 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 1,                         /* PLL loop divider, Fout = Fin * ( 20 + loopDivider*2 + numerator / denominator ) */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 0,                         /* PLL loop divider, Fout = Fin * 20 */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN =
+    {
+        .loopDivider = 31,                        /* PLL loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .postDivider = 8,                         /* Divider after PLL */
+        .numerator = 0,                           /* 30 bit numerator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .denominator = 1,                         /* 30 bit denominator of fractional loop divider, Fout = Fin * ( loopDivider + numerator / denominator ) */
+        .src = 0,                                 /* Bypass clock source, 0 - OSC 24M, 1 - CLK1_P and CLK1_N */
+    };
+/*******************************************************************************
+ * Code for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+void BOARD_BootClockRUN(void)
+{
+    /* Init RTC OSC clock frequency. */
+    CLOCK_SetRtcXtalFreq(32768U);
+    /* Enable 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 |= XTALOSC24M_OSC_CONFIG2_ENABLE_1M_MASK;
+    /* Use free 1MHz clock output. */
+    XTALOSC24M->OSC_CONFIG2 &= ~XTALOSC24M_OSC_CONFIG2_MUX_1M_MASK;
+    /* Set XTAL 24MHz clock frequency. */
+    CLOCK_SetXtalFreq(24000000U);
+    /* Enable XTAL 24MHz clock source. */
+    CLOCK_InitExternalClk(0);
+    /* Enable internal RC. */
+    CLOCK_InitRcOsc24M();
+    /* Switch clock source to external OSC. */
+    CLOCK_SwitchOsc(kCLOCK_XtalOsc);
+    /* Set Oscillator ready counter value. */
+    CCM->CCR = (CCM->CCR & (~CCM_CCR_OSCNT_MASK)) | CCM_CCR_OSCNT(127);
+    /* Setting PeriphClk2Mux and PeriphMux to provide stable clock before PLLs are initialed */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 1); /* Set PERIPH_CLK2 MUX to OSC */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 1);     /* Set PERIPH_CLK MUX to PERIPH_CLK2 */
+    /* Setting the VDD_SOC to 1.275V. It is necessary to config AHB to 600Mhz. */
+    DCDC->REG3 = (DCDC->REG3 & (~DCDC_REG3_TRG_MASK)) | DCDC_REG3_TRG(0x13);
+    /* Waiting for DCDC_STS_DC_OK bit is asserted */
+    while (DCDC_REG0_STS_DC_OK_MASK != (DCDC_REG0_STS_DC_OK_MASK & DCDC->REG0))
+    {
+    }
+    /* Set AHB_PODF. */
+    CLOCK_SetDiv(kCLOCK_AhbDiv, 0);
+    /* Disable IPG clock gate. */
+    CLOCK_DisableClock(kCLOCK_Adc1);
+    CLOCK_DisableClock(kCLOCK_Adc2);
+    CLOCK_DisableClock(kCLOCK_Xbar1);
+    CLOCK_DisableClock(kCLOCK_Xbar2);
+    CLOCK_DisableClock(kCLOCK_Xbar3);
+    /* Set IPG_PODF. */
+    CLOCK_SetDiv(kCLOCK_IpgDiv, 3);
+    /* Set ARM_PODF. */
+    CLOCK_SetDiv(kCLOCK_ArmDiv, 1);
+    /* Set PERIPH_CLK2_PODF. */
+    CLOCK_SetDiv(kCLOCK_PeriphClk2Div, 0);
+    /* Disable PERCLK clock gate. */
+    CLOCK_DisableClock(kCLOCK_Gpt1);
+    CLOCK_DisableClock(kCLOCK_Gpt1S);
+    CLOCK_DisableClock(kCLOCK_Gpt2);
+    CLOCK_DisableClock(kCLOCK_Gpt2S);
+    CLOCK_DisableClock(kCLOCK_Pit);
+    /* Set PERCLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_PerclkDiv, 1);
+    /* Disable USDHC1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc1);
+    /* Set USDHC1_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc1Div, 1);
+    /* Set Usdhc1 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc1Mux, 0);
+    /* Disable USDHC2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Usdhc2);
+    /* Set USDHC2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Usdhc2Div, 1);
+    /* Set Usdhc2 clock source. */
+    CLOCK_SetMux(kCLOCK_Usdhc2Mux, 0);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+    /* Disable Semc clock gate. */
+    CLOCK_DisableClock(kCLOCK_Semc);
+    /* Set SEMC_PODF. */
+    CLOCK_SetDiv(kCLOCK_SemcDiv, 7);
+    /* Set Semc alt clock source. */
+    CLOCK_SetMux(kCLOCK_SemcAltMux, 0);
+    /* Set Semc clock source. */
+    CLOCK_SetMux(kCLOCK_SemcMux, 0);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Disable Flexspi clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi);
+    /* Set FLEXSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_FlexspiDiv, 1);
+    /* Set Flexspi clock source. */
+    CLOCK_SetMux(kCLOCK_FlexspiMux, 3);
+#endif
+    /* Disable Flexspi2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_FlexSpi2);
+    /* Set FLEXSPI2_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexspi2Div, 1);
+    /* Set Flexspi2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexspi2Mux, 1);
+    /* Disable CSI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Csi);
+    /* Set CSI_PODF. */
+    CLOCK_SetDiv(kCLOCK_CsiDiv, 1);
+    /* Set Csi clock source. */
+    CLOCK_SetMux(kCLOCK_CsiMux, 0);
+    /* Disable LPSPI clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpspi1);
+    CLOCK_DisableClock(kCLOCK_Lpspi2);
+    CLOCK_DisableClock(kCLOCK_Lpspi3);
+    CLOCK_DisableClock(kCLOCK_Lpspi4);
+    /* Set LPSPI_PODF. */
+    CLOCK_SetDiv(kCLOCK_LpspiDiv, 4);
+    /* Set Lpspi clock source. */
+    CLOCK_SetMux(kCLOCK_LpspiMux, 2);
+    /* Disable TRACE clock gate. */
+    CLOCK_DisableClock(kCLOCK_Trace);
+    /* Set TRACE_PODF. */
+    CLOCK_SetDiv(kCLOCK_TraceDiv, 3);
+    /* Set Trace clock source. */
+    CLOCK_SetMux(kCLOCK_TraceMux, 0);
+    /* Disable SAI1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai1);
+    /* Set SAI1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai1PreDiv, 3);
+    /* Set SAI1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai1Div, 1);
+    /* Set Sai1 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai1Mux, 0);
+    /* Disable SAI2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai2);
+    /* Set SAI2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai2PreDiv, 3);
+    /* Set SAI2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai2Div, 1);
+    /* Set Sai2 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai2Mux, 0);
+    /* Disable SAI3 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Sai3);
+    /* Set SAI3_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Sai3PreDiv, 3);
+    /* Set SAI3_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Sai3Div, 1);
+    /* Set Sai3 clock source. */
+    CLOCK_SetMux(kCLOCK_Sai3Mux, 0);
+    /* Disable Lpi2c clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpi2c1);
+    CLOCK_DisableClock(kCLOCK_Lpi2c2);
+    CLOCK_DisableClock(kCLOCK_Lpi2c3);
+    /* Set LPI2C_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Lpi2cDiv, 0);
+    /* Set Lpi2c clock source. */
+    CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
+    /* Disable CAN clock gate. */
+    CLOCK_DisableClock(kCLOCK_Can1);
+    CLOCK_DisableClock(kCLOCK_Can2);
+    CLOCK_DisableClock(kCLOCK_Can3);
+    CLOCK_DisableClock(kCLOCK_Can1S);
+    CLOCK_DisableClock(kCLOCK_Can2S);
+    CLOCK_DisableClock(kCLOCK_Can3S);
+    /* Set CAN_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_CanDiv, 1);
+    /* Set Can clock source. */
+    CLOCK_SetMux(kCLOCK_CanMux, 2);
+    /* Disable UART clock gate. */
+    CLOCK_DisableClock(kCLOCK_Lpuart1);
+    CLOCK_DisableClock(kCLOCK_Lpuart2);
+    CLOCK_DisableClock(kCLOCK_Lpuart3);
+    CLOCK_DisableClock(kCLOCK_Lpuart4);
+    CLOCK_DisableClock(kCLOCK_Lpuart5);
+    CLOCK_DisableClock(kCLOCK_Lpuart6);
+    CLOCK_DisableClock(kCLOCK_Lpuart7);
+    CLOCK_DisableClock(kCLOCK_Lpuart8);
+    /* Set UART_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_UartDiv, 0);
+    /* Set Uart clock source. */
+    CLOCK_SetMux(kCLOCK_UartMux, 0);
+    /* Disable LCDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_LcdPixel);
+    /* Set LCDIF_PRED. */
+    CLOCK_SetDiv(kCLOCK_LcdifPreDiv, 1);
+    /* Set LCDIF_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_LcdifDiv, 3);
+    /* Set Lcdif pre clock source. */
+    CLOCK_SetMux(kCLOCK_LcdifPreMux, 5);
+    /* Disable SPDIF clock gate. */
+    CLOCK_DisableClock(kCLOCK_Spdif);
+    /* Set SPDIF0_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Spdif0PreDiv, 1);
+    /* Set SPDIF0_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Spdif0Div, 7);
+    /* Set Spdif clock source. */
+    CLOCK_SetMux(kCLOCK_SpdifMux, 3);
+    /* Disable Flexio1 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio1);
+    /* Set FLEXIO1_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio1PreDiv, 1);
+    /* Set FLEXIO1_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio1Div, 7);
+    /* Set Flexio1 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio1Mux, 3);
+    /* Disable Flexio2 clock gate. */
+    CLOCK_DisableClock(kCLOCK_Flexio2);
+    /* Set FLEXIO2_CLK_PRED. */
+    CLOCK_SetDiv(kCLOCK_Flexio2PreDiv, 1);
+    /* Set FLEXIO2_CLK_PODF. */
+    CLOCK_SetDiv(kCLOCK_Flexio2Div, 7);
+    /* Set Flexio2 clock source. */
+    CLOCK_SetMux(kCLOCK_Flexio2Mux, 3);
+    /* Set Pll3 sw clock source. */
+    CLOCK_SetMux(kCLOCK_Pll3SwMux, 0);
+    /* Init ARM PLL. */
+    CLOCK_InitArmPll(&armPllConfig_BOARD_BootClockRUN);
+    /* In SDK projects, SDRAM (configured by SEMC) will be initialized in either debug script or dcd.
+     * With this macro SKIP_SYSCLK_INIT, system pll (selected to be SEMC source clock in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for SEMC, user may want to avoid changing that clock as well.*/
+#ifndef SKIP_SYSCLK_INIT
+#if defined(XIP_BOOT_HEADER_DCD_ENABLE) && (XIP_BOOT_HEADER_DCD_ENABLE == 1)
+    #warning "SKIP_SYSCLK_INIT should be defined to keep system pll (selected to be SEMC source clock in SDK projects) unchanged."
+#endif
+    /* Init System PLL. */
+    CLOCK_InitSysPll(&sysPllConfig_BOARD_BootClockRUN);
+    /* Init System pfd0. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd0, 27);
+    /* Init System pfd1. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd1, 16);
+    /* Init System pfd2. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd2, 24);
+    /* Init System pfd3. */
+    CLOCK_InitSysPfd(kCLOCK_Pfd3, 16);
+#endif
+    /* In SDK projects, external flash (configured by FLEXSPI) will be initialized by dcd.
+     * With this macro XIP_EXTERNAL_FLASH, usb1 pll (selected to be FLEXSPI clock source in SDK projects) will be left unchanged.
+     * Note: If another clock source is selected for FLEXSPI, user may want to avoid changing that clock as well.*/
+#if !(defined(XIP_EXTERNAL_FLASH) && (XIP_EXTERNAL_FLASH == 1))
+    /* Init Usb1 PLL. */
+    CLOCK_InitUsb1Pll(&usb1PllConfig_BOARD_BootClockRUN);
+    /* Init Usb1 pfd0. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd0, 33);
+    /* Init Usb1 pfd1. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd1, 16);
+    /* Init Usb1 pfd2. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd2, 17);
+    /* Init Usb1 pfd3. */
+    CLOCK_InitUsb1Pfd(kCLOCK_Pfd3, 19);
+#endif
+    /* DeInit Audio PLL. */
+    CLOCK_DeinitAudioPll();
+    /* Bypass Audio PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllAudio, 1);
+    /* Set divider for Audio PLL. */
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK;
+    CCM_ANALOG->MISC2 &= ~CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK;
+    /* Enable Audio PLL output. */
+    CCM_ANALOG->PLL_AUDIO |= CCM_ANALOG_PLL_AUDIO_ENABLE_MASK;
+    /* Init Video PLL. */
+    uint32_t pllVideo;
+    /* Disable Video PLL output before initial Video PLL. */
+    CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_ENABLE_MASK;
+    /* Bypass PLL first */
+    CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) |
+                            CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(0);
+    CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(0);
+    CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(1);
+    pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) |
+               CCM_ANALOG_PLL_VIDEO_ENABLE_MASK |CCM_ANALOG_PLL_VIDEO_DIV_SELECT(31);
+    pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1);
+    CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & (~CCM_ANALOG_MISC2_VIDEO_DIV_MASK)) | CCM_ANALOG_MISC2_VIDEO_DIV(3);
+    CCM_ANALOG->PLL_VIDEO = pllVideo;
+    while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0)
+    {
+    }
+    /* Disable bypass for Video PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllVideo, 0);
+    /* DeInit Enet PLL. */
+    CLOCK_DeinitEnetPll();
+    /* Bypass Enet PLL. */
+    CLOCK_SetPllBypass(CCM_ANALOG, kCLOCK_PllEnet, 1);
+    /* Set Enet output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_DIV_SELECT(1);
+    /* Enable Enet output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENABLE_MASK;
+    /* Set Enet2 output divider. */
+    CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_ENET_ENET2_DIV_SELECT(0);
+    /* Enable Enet2 output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET2_REF_EN_MASK;
+    /* Enable Enet25M output. */
+    CCM_ANALOG->PLL_ENET |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK;
+    /* Init Usb2 PLL. */
+    CLOCK_InitUsb2Pll(&usb2PllConfig_BOARD_BootClockRUN);
+    /* Set preperiph clock source. */
+    CLOCK_SetMux(kCLOCK_PrePeriphMux, 3);
+    /* Set periph clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphMux, 0);
+    /* Set periph clock2 clock source. */
+    CLOCK_SetMux(kCLOCK_PeriphClk2Mux, 0);
+    /* Set per clock source. */
+    CLOCK_SetMux(kCLOCK_PerclkMux, 0);
+    /* Set lvds1 clock source. */
+    CCM_ANALOG->MISC1 = (CCM_ANALOG->MISC1 & (~CCM_ANALOG_MISC1_LVDS1_CLK_SEL_MASK)) | CCM_ANALOG_MISC1_LVDS1_CLK_SEL(0);
+    /* Set clock out1 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_DIV_MASK)) | CCM_CCOSR_CLKO1_DIV(0);
+    /* Set clock out1 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO1_SEL_MASK)) | CCM_CCOSR_CLKO1_SEL(1);
+    /* Set clock out2 divider. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_DIV_MASK)) | CCM_CCOSR_CLKO2_DIV(0);
+    /* Set clock out2 source. */
+    CCM->CCOSR = (CCM->CCOSR & (~CCM_CCOSR_CLKO2_SEL_MASK)) | CCM_CCOSR_CLKO2_SEL(18);
+    /* Set clock out1 drives clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLK_OUT_SEL_MASK;
+    /* Disable clock out1. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO1_EN_MASK;
+    /* Disable clock out2. */
+    CCM->CCOSR &= ~CCM_CCOSR_CLKO2_EN_MASK;
+    /* Set SAI1 MCLK1 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk1Sel, 0);
+    /* Set SAI1 MCLK2 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk2Sel, 0);
+    /* Set SAI1 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI1MClk3Sel, 0);
+    /* Set SAI2 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI2MClk3Sel, 0);
+    /* Set SAI3 MCLK3 clock source. */
+    IOMUXC_SetSaiMClkClockSource(IOMUXC_GPR, kIOMUXC_GPR_SAI3MClk3Sel, 0);
+    /* Set MQS configuration. */
+    IOMUXC_MQSConfig(IOMUXC_GPR,kIOMUXC_MqsPwmOverSampleRate32, 0);
+    /* Set ENET Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET1_TX_CLK_DIR_MASK;
+    /* Set ENET2 Ref clock source. */
+    IOMUXC_GPR->GPR1 &= ~IOMUXC_GPR_GPR1_ENET2_TX_CLK_DIR_MASK;
+    /* Set GPT1 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT1_MASK;
+    /* Set GPT2 High frequency reference clock source. */
+    IOMUXC_GPR->GPR5 &= ~IOMUXC_GPR_GPR5_VREF_1M_CLK_GPT2_MASK;
+    /* Set SystemCoreClock variable. */
+    SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK;
+}
diff --git a/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h
new file mode 100644
index 000000000..7ce24b6f4
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/board/clock_config.h
@@ -0,0 +1,123 @@
+#ifndef _CLOCK_CONFIG_H_
+#define _CLOCK_CONFIG_H_
+
+#include "fsl_common.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+#define BOARD_XTAL0_CLK_HZ                         24000000U  /*!< Board xtal0 frequency in Hz */
+
+#define BOARD_XTAL32K_CLK_HZ                          32768U  /*!< Board xtal32k frequency in Hz */
+/*******************************************************************************
+ ************************ BOARD_InitBootClocks function ************************
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes default configuration of clocks.
+ *
+ */
+void BOARD_InitBootClocks(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*******************************************************************************
+ ********************** Configuration BOARD_BootClockRUN ***********************
+ ******************************************************************************/
+/*******************************************************************************
+ * Definitions for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#define BOARD_BOOTCLOCKRUN_CORE_CLOCK             600000000U  /*!< Core clock frequency: 600000000Hz */
+
+/* Clock outputs (values are in Hz): */
+#define BOARD_BOOTCLOCKRUN_AHB_CLK_ROOT               600000000UL
+#define BOARD_BOOTCLOCKRUN_CAN_CLK_ROOT               40000000UL
+#define BOARD_BOOTCLOCKRUN_CKIL_SYNC_CLK_ROOT         32768UL
+#define BOARD_BOOTCLOCKRUN_CLKO1_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLKO2_CLK                  0UL
+#define BOARD_BOOTCLOCKRUN_CLK_1M                     1000000UL
+#define BOARD_BOOTCLOCKRUN_CLK_24M                    24000000UL
+#define BOARD_BOOTCLOCKRUN_CSI_CLK_ROOT               12000000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_125M_CLK             1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET2_REF_CLK              0UL
+#define BOARD_BOOTCLOCKRUN_ENET2_TX_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_125M_CLK              2400000UL
+#define BOARD_BOOTCLOCKRUN_ENET_25M_REF_CLK           1200000UL
+#define BOARD_BOOTCLOCKRUN_ENET_REF_CLK               0UL
+#define BOARD_BOOTCLOCKRUN_ENET_TX_CLK                0UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO1_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXIO2_CLK_ROOT           30000000UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI2_CLK_ROOT          130909090UL
+#define BOARD_BOOTCLOCKRUN_FLEXSPI_CLK_ROOT           130909090UL
+#define BOARD_BOOTCLOCKRUN_GPT1_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_GPT2_IPG_CLK_HIGHFREQ      75000000UL
+#define BOARD_BOOTCLOCKRUN_IPG_CLK_ROOT               150000000UL
+#define BOARD_BOOTCLOCKRUN_LCDIF_CLK_ROOT             67500000UL
+#define BOARD_BOOTCLOCKRUN_LPI2C_CLK_ROOT             60000000UL
+#define BOARD_BOOTCLOCKRUN_LPSPI_CLK_ROOT             105600000UL
+#define BOARD_BOOTCLOCKRUN_LVDS1_CLK                  1200000000UL
+#define BOARD_BOOTCLOCKRUN_MQS_MCLK                   63529411UL
+#define BOARD_BOOTCLOCKRUN_PERCLK_CLK_ROOT            75000000UL
+#define BOARD_BOOTCLOCKRUN_PLL7_MAIN_CLK              480000000UL
+#define BOARD_BOOTCLOCKRUN_SAI1_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK2                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI1_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI2_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI2_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SAI3_CLK_ROOT              63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK1                 63529411UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK2                 0UL
+#define BOARD_BOOTCLOCKRUN_SAI3_MCLK3                 30000000UL
+#define BOARD_BOOTCLOCKRUN_SEMC_CLK_ROOT              75000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_CLK_ROOT            30000000UL
+#define BOARD_BOOTCLOCKRUN_SPDIF0_EXTCLK_OUT          0UL
+#define BOARD_BOOTCLOCKRUN_TRACE_CLK_ROOT             132000000UL
+#define BOARD_BOOTCLOCKRUN_UART_CLK_ROOT              80000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY1_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USBPHY2_CLK                480000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC1_CLK_ROOT            198000000UL
+#define BOARD_BOOTCLOCKRUN_USDHC2_CLK_ROOT            198000000UL
+
+/*! @brief Arm PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_arm_pll_config_t armPllConfig_BOARD_BootClockRUN;
+/*! @brief Usb1 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb1PllConfig_BOARD_BootClockRUN;
+/*! @brief Usb2 PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_usb_pll_config_t usb2PllConfig_BOARD_BootClockRUN;
+/*! @brief Sys PLL for BOARD_BootClockRUN configuration.
+ */
+extern const clock_sys_pll_config_t sysPllConfig_BOARD_BootClockRUN;
+/*! @brief Video PLL set for BOARD_BootClockRUN configuration.
+ */
+extern const clock_video_pll_config_t videoPllConfig_BOARD_BootClockRUN;
+
+/*******************************************************************************
+ * API for BOARD_BootClockRUN configuration
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*!
+ * @brief This function executes configuration of clocks.
+ *
+ */
+void BOARD_BootClockRUN(void);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+#endif /* _CLOCK_CONFIG_H_ */
diff --git a/hw/bsp/imxrt/boards/teensy_41/teensy41.mex b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex
new file mode 100644
index 000000000..39b3ed606
--- /dev/null
+++ b/hw/bsp/imxrt/boards/teensy_41/teensy41.mex
@@ -0,0 +1,1001 @@
+<?xml version="1.0" encoding= "UTF-8" ?>
+<configuration name="MIMXRT1060-EVK" xsi:schemaLocation="http://mcuxpresso.nxp.com/XSD/mex_configuration_13 http://mcuxpresso.nxp.com/XSD/mex_configuration_13.xsd" uuid="2174caba-38fe-48d5-8f89-42a23354d23b" version="13" xmlns="http://mcuxpresso.nxp.com/XSD/mex_configuration_13" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+   <common>
+      <processor>MIMXRT1062xxxxA</processor>
+      <package>MIMXRT1062DVL6A</package>
+      <board>MIMXRT1060-EVK</board>
+      <board_revision>A2</board_revision>
+      <mcu_data>ksdk2_0</mcu_data>
+      <cores selected="core0">
+         <core name="Cortex-M7F" id="core0" description="M7 core"/>
+      </cores>
+      <description></description>
+   </common>
+   <preferences>
+      <validate_boot_init_only>false</validate_boot_init_only>
+      <generate_extended_information>false</generate_extended_information>
+      <generate_code_modified_registers_only>false</generate_code_modified_registers_only>
+      <update_include_paths>true</update_include_paths>
+      <generate_registers_defines>false</generate_registers_defines>
+   </preferences>
+   <tools>
+      <pins name="Pins" version="13.1" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/pin_mux.c" update_enabled="true"/>
+            <file path="board/pin_mux.h" update_enabled="true"/>
+         </generated_project_files>
+         <pins_profile>
+            <processor_version>13.0.2</processor_version>
+            <power_domains/>
+         </pins_profile>
+         <functions_list>
+            <function name="BOARD_InitPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins/>
+            </function>
+            <function name="BOARD_InitDEBUG_UARTPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>true</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LPUART1" description="Peripheral LPUART1 is not initialized" problem_level="1" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitDEBUG_UARTPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LPUART1" signal="TX" pin_num="K14" pin_signal="GPIO_AD_B0_12">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPUART1" signal="RX" pin_num="L14" pin_signal="GPIO_AD_B0_13">
+                     <pin_features>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Down_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Disable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+               </pins>
+            </function>
+            <function name="BOARD_InitSDRAMPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="SEMC" description="Peripheral SEMC is not initialized" problem_level="1" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitSDRAMPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="SEMC" signal="ADDR, 00" pin_num="C2" pin_signal="GPIO_EMC_09"/>
+                  <pin peripheral="SEMC" signal="ADDR, 01" pin_num="G1" pin_signal="GPIO_EMC_10"/>
+                  <pin peripheral="SEMC" signal="ADDR, 02" pin_num="G3" pin_signal="GPIO_EMC_11"/>
+                  <pin peripheral="SEMC" signal="ADDR, 03" pin_num="H1" pin_signal="GPIO_EMC_12"/>
+                  <pin peripheral="SEMC" signal="ADDR, 04" pin_num="A6" pin_signal="GPIO_EMC_13"/>
+                  <pin peripheral="SEMC" signal="ADDR, 05" pin_num="B6" pin_signal="GPIO_EMC_14"/>
+                  <pin peripheral="SEMC" signal="ADDR, 06" pin_num="B1" pin_signal="GPIO_EMC_15"/>
+                  <pin peripheral="SEMC" signal="ADDR, 07" pin_num="A5" pin_signal="GPIO_EMC_16"/>
+                  <pin peripheral="SEMC" signal="ADDR, 08" pin_num="A4" pin_signal="GPIO_EMC_17"/>
+                  <pin peripheral="SEMC" signal="ADDR, 09" pin_num="B2" pin_signal="GPIO_EMC_18"/>
+                  <pin peripheral="SEMC" signal="ADDR, 10" pin_num="G2" pin_signal="GPIO_EMC_23"/>
+                  <pin peripheral="SEMC" signal="ADDR, 11" pin_num="B4" pin_signal="GPIO_EMC_19"/>
+                  <pin peripheral="SEMC" signal="ADDR, 12" pin_num="A3" pin_signal="GPIO_EMC_20"/>
+                  <pin peripheral="SEMC" signal="BA, 0" pin_num="C1" pin_signal="GPIO_EMC_21"/>
+                  <pin peripheral="SEMC" signal="BA, 1" pin_num="F1" pin_signal="GPIO_EMC_22"/>
+                  <pin peripheral="SEMC" signal="semc_cas" pin_num="D3" pin_signal="GPIO_EMC_24"/>
+                  <pin peripheral="SEMC" signal="semc_cke" pin_num="A2" pin_signal="GPIO_EMC_27"/>
+                  <pin peripheral="SEMC" signal="semc_clk" pin_num="B3" pin_signal="GPIO_EMC_26"/>
+                  <pin peripheral="SEMC" signal="DATA, 00" pin_num="E3" pin_signal="GPIO_EMC_00"/>
+                  <pin peripheral="SEMC" signal="DATA, 01" pin_num="F3" pin_signal="GPIO_EMC_01"/>
+                  <pin peripheral="SEMC" signal="DATA, 02" pin_num="F4" pin_signal="GPIO_EMC_02"/>
+                  <pin peripheral="SEMC" signal="DATA, 03" pin_num="G4" pin_signal="GPIO_EMC_03"/>
+                  <pin peripheral="SEMC" signal="DATA, 04" pin_num="F2" pin_signal="GPIO_EMC_04"/>
+                  <pin peripheral="SEMC" signal="DATA, 05" pin_num="G5" pin_signal="GPIO_EMC_05"/>
+                  <pin peripheral="SEMC" signal="DATA, 06" pin_num="H5" pin_signal="GPIO_EMC_06"/>
+                  <pin peripheral="SEMC" signal="DATA, 07" pin_num="H4" pin_signal="GPIO_EMC_07"/>
+                  <pin peripheral="SEMC" signal="DATA, 08" pin_num="C6" pin_signal="GPIO_EMC_30"/>
+                  <pin peripheral="SEMC" signal="DATA, 09" pin_num="C5" pin_signal="GPIO_EMC_31"/>
+                  <pin peripheral="SEMC" signal="DATA, 10" pin_num="D5" pin_signal="GPIO_EMC_32"/>
+                  <pin peripheral="SEMC" signal="DATA, 11" pin_num="C4" pin_signal="GPIO_EMC_33"/>
+                  <pin peripheral="SEMC" signal="DATA, 12" pin_num="D4" pin_signal="GPIO_EMC_34"/>
+                  <pin peripheral="SEMC" signal="DATA, 13" pin_num="E5" pin_signal="GPIO_EMC_35"/>
+                  <pin peripheral="SEMC" signal="DATA, 14" pin_num="C3" pin_signal="GPIO_EMC_36"/>
+                  <pin peripheral="SEMC" signal="DATA, 15" pin_num="E4" pin_signal="GPIO_EMC_37"/>
+                  <pin peripheral="SEMC" signal="DM, 0" pin_num="H3" pin_signal="GPIO_EMC_08"/>
+                  <pin peripheral="SEMC" signal="DM, 1" pin_num="D6" pin_signal="GPIO_EMC_38"/>
+                  <pin peripheral="SEMC" signal="semc_ras" pin_num="D2" pin_signal="GPIO_EMC_25"/>
+                  <pin peripheral="SEMC" signal="semc_we" pin_num="D1" pin_signal="GPIO_EMC_28"/>
+                  <pin peripheral="SEMC" signal="CS, 0" pin_num="E1" pin_signal="GPIO_EMC_29"/>
+                  <pin peripheral="SEMC" signal="semc_dqs" pin_num="B7" pin_signal="GPIO_EMC_39"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCSIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CSI" description="Peripheral CSI is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="Peripheral" resourceId="LPI2C1" description="Peripheral LPI2C1 is not initialized" problem_level="1" source="Pins:BOARD_InitCSIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCSIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CSI" signal="csi_data, 09" pin_num="H13" pin_signal="GPIO_AD_B1_08"/>
+                  <pin peripheral="CSI" signal="csi_data, 08" pin_num="M13" pin_signal="GPIO_AD_B1_09"/>
+                  <pin peripheral="CSI" signal="csi_data, 07" pin_num="L13" pin_signal="GPIO_AD_B1_10"/>
+                  <pin peripheral="CSI" signal="csi_data, 06" pin_num="J13" pin_signal="GPIO_AD_B1_11"/>
+                  <pin peripheral="CSI" signal="csi_data, 05" pin_num="H12" pin_signal="GPIO_AD_B1_12"/>
+                  <pin peripheral="CSI" signal="csi_data, 04" pin_num="H11" pin_signal="GPIO_AD_B1_13"/>
+                  <pin peripheral="CSI" signal="csi_data, 02" pin_num="J14" pin_signal="GPIO_AD_B1_15"/>
+                  <pin peripheral="CSI" signal="csi_data, 03" pin_num="G12" pin_signal="GPIO_AD_B1_14"/>
+                  <pin peripheral="CSI" signal="csi_pixclk" pin_num="L12" pin_signal="GPIO_AD_B1_04"/>
+                  <pin peripheral="CSI" signal="csi_mclk" pin_num="K12" pin_signal="GPIO_AD_B1_05"/>
+                  <pin peripheral="CSI" signal="csi_vsync" pin_num="J12" pin_signal="GPIO_AD_B1_06"/>
+                  <pin peripheral="CSI" signal="csi_hsync" pin_num="K10" pin_signal="GPIO_AD_B1_07"/>
+                  <pin peripheral="LPI2C1" signal="SCL" pin_num="J11" pin_signal="GPIO_AD_B1_00">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SCL"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LPI2C1" signal="SDA" pin_num="K11" pin_signal="GPIO_AD_B1_01">
+                     <pin_features>
+                        <pin_feature name="identifier" value="CSI_I2C_SDA"/>
+                        <pin_feature name="software_input_on" value="Disable"/>
+                        <pin_feature name="hysteresis_enable" value="Disable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_22K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Keeper"/>
+                        <pin_feature name="pull_keeper_enable" value="Enable"/>
+                        <pin_feature name="open_drain" value="Enable"/>
+                        <pin_feature name="speed" value="MHZ_100"/>
+                        <pin_feature name="drive_strength" value="R0_6"/>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 04" pin_num="F11" pin_signal="GPIO_AD_B0_04"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitLCDPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="LCDIF" description="Peripheral LCDIF is not initialized" problem_level="1" source="Pins:BOARD_InitLCDPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitLCDPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 00" pin_num="C8" pin_signal="GPIO_B0_04">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 01" pin_num="B8" pin_signal="GPIO_B0_05">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 02" pin_num="A8" pin_signal="GPIO_B0_06">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_clk" pin_num="D7" pin_signal="GPIO_B0_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 03" pin_num="A9" pin_signal="GPIO_B0_07">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 04" pin_num="B9" pin_signal="GPIO_B0_08">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 05" pin_num="C9" pin_signal="GPIO_B0_09">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 06" pin_num="D9" pin_signal="GPIO_B0_10">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 07" pin_num="A10" pin_signal="GPIO_B0_11">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 08" pin_num="C10" pin_signal="GPIO_B0_12">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 09" pin_num="D10" pin_signal="GPIO_B0_13">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 10" pin_num="E10" pin_signal="GPIO_B0_14">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 11" pin_num="E11" pin_signal="GPIO_B0_15">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 12" pin_num="A11" pin_signal="GPIO_B1_00">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 13" pin_num="B11" pin_signal="GPIO_B1_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 14" pin_num="C11" pin_signal="GPIO_B1_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_data, 15" pin_num="D11" pin_signal="GPIO_B1_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_enable" pin_num="E7" pin_signal="GPIO_B0_01">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_hsync" pin_num="E8" pin_signal="GPIO_B0_02">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="LCDIF" signal="lcdif_vsync" pin_num="D8" pin_signal="GPIO_B0_03">
+                     <pin_features>
+                        <pin_feature name="hysteresis_enable" value="Enable"/>
+                        <pin_feature name="pull_up_down_config" value="Pull_Up_100K_Ohm"/>
+                        <pin_feature name="pull_keeper_select" value="Pull"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO2" signal="gpio_io, 31" pin_num="B14" pin_signal="GPIO_B1_15">
+                     <pin_features>
+                        <pin_feature name="slew_rate" value="Slow"/>
+                     </pin_features>
+                  </pin>
+                  <pin peripheral="GPIO1" signal="gpio_io, 02" pin_num="M11" pin_signal="GPIO_AD_B0_02"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitCANPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="CAN2" description="Peripheral CAN2 is not initialized" problem_level="1" source="Pins:BOARD_InitCANPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitCANPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="CAN2" signal="TX" pin_num="H14" pin_signal="GPIO_AD_B0_14"/>
+                  <pin peripheral="CAN2" signal="RX" pin_num="L10" pin_signal="GPIO_AD_B0_15"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitENETPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="ENET" description="Peripheral ENET is not initialized" problem_level="1" source="Pins:BOARD_InitENETPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitENETPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="ENET" signal="enet_mdc" pin_num="A7" pin_signal="GPIO_EMC_40"/>
+                  <pin peripheral="ENET" signal="enet_mdio" pin_num="C7" pin_signal="GPIO_EMC_41"/>
+                  <pin peripheral="ENET" signal="enet_ref_clk" pin_num="B13" pin_signal="GPIO_B1_10"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 0" pin_num="E12" pin_signal="GPIO_B1_04"/>
+                  <pin peripheral="ENET" signal="enet_rx_data, 1" pin_num="D12" pin_signal="GPIO_B1_05"/>
+                  <pin peripheral="ENET" signal="enet_rx_en" pin_num="C12" pin_signal="GPIO_B1_06"/>
+                  <pin peripheral="ENET" signal="enet_rx_er" pin_num="C13" pin_signal="GPIO_B1_11"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 0" pin_num="B12" pin_signal="GPIO_B1_07"/>
+                  <pin peripheral="ENET" signal="enet_tx_data, 1" pin_num="A12" pin_signal="GPIO_B1_08"/>
+                  <pin peripheral="ENET" signal="enet_tx_en" pin_num="A13" pin_signal="GPIO_B1_09"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitUSDHCPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="USDHC1" description="Peripheral USDHC1 is not initialized" problem_level="1" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitUSDHCPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 3" pin_num="J2" pin_signal="GPIO_SD_B0_05"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 2" pin_num="H2" pin_signal="GPIO_SD_B0_04"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 1" pin_num="K1" pin_signal="GPIO_SD_B0_03"/>
+                  <pin peripheral="USDHC1" signal="usdhc_data, 0" pin_num="J1" pin_signal="GPIO_SD_B0_02"/>
+                  <pin peripheral="USDHC1" signal="usdhc_cmd" pin_num="J4" pin_signal="GPIO_SD_B0_00"/>
+                  <pin peripheral="USDHC1" signal="usdhc_clk" pin_num="J3" pin_signal="GPIO_SD_B0_01"/>
+                  <pin peripheral="USDHC1" signal="usdhc_vselect" pin_num="C14" pin_signal="GPIO_B1_14"/>
+               </pins>
+            </function>
+            <function name="BOARD_InitQSPIPins">
+               <description>Configures pin routing and optionally pin electrical features.</description>
+               <options>
+                  <callFromInitBoot>false</callFromInitBoot>
+                  <coreID>core0</coreID>
+                  <enableClock>true</enableClock>
+               </options>
+               <dependencies>
+                  <dependency resourceType="Peripheral" resourceId="FLEXSPI" description="Peripheral FLEXSPI is not initialized" problem_level="1" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="initialized" evaluation="equal">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Pins initialization requires the COMMON Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Pins initialization requires the IOMUXC Driver in the project." problem_level="2" source="Pins:BOARD_InitQSPIPins">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <pins>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA0" pin_num="P3" pin_signal="GPIO_SD_B1_08"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA1" pin_num="N4" pin_signal="GPIO_SD_B1_09"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA2" pin_num="P4" pin_signal="GPIO_SD_B1_10"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DATA3" pin_num="P5" pin_signal="GPIO_SD_B1_11"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SCLK" pin_num="L4" pin_signal="GPIO_SD_B1_07"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_SS0_B" pin_num="L3" pin_signal="GPIO_SD_B1_06"/>
+                  <pin peripheral="FLEXSPI" signal="FLEXSPI_A_DQS" pin_num="N3" pin_signal="GPIO_SD_B1_05"/>
+               </pins>
+            </function>
+         </functions_list>
+      </pins>
+      <clocks name="Clocks" version="11.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/clock_config.c" update_enabled="true"/>
+            <file path="board/clock_config.h" update_enabled="true"/>
+         </generated_project_files>
+         <clocks_profile>
+            <processor_version>13.0.2</processor_version>
+         </clocks_profile>
+         <clock_configurations>
+            <clock_configuration name="BOARD_BootClockRUN" id_prefix="" prefix_user_defined="false">
+               <description></description>
+               <options/>
+               <dependencies>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtali" description="&apos;RTC_XTALI&apos; (Pins tool id: XTALOSC24M.rtc_xtali, Clocks tool id: XTALOSC24M.RTC_XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.rtc_xtalo" description="&apos;RTC_XTALO&apos; (Pins tool id: XTALOSC24M.rtc_xtalo, Clocks tool id: XTALOSC24M.RTC_XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtali" description="&apos;XTALI&apos; (Pins tool id: XTALOSC24M.xtali, Clocks tool id: XTALOSC24M.XTALI) needs to have &apos;INPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>INPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to be routed" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="routed" evaluation="">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="PinSignal" resourceId="XTALOSC24M.xtalo" description="&apos;XTALO&apos; (Pins tool id: XTALOSC24M.xtalo, Clocks tool id: XTALOSC24M.XTALO) needs to have &apos;OUTPUT&apos; direction" problem_level="1" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="direction" evaluation="">
+                        <data>OUTPUT</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.common" description="Clocks initialization requires the COMMON Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+                  <dependency resourceType="SWComponent" resourceId="platform.drivers.iomuxc" description="Clocks initialization requires the IOMUXC Driver in the project." problem_level="2" source="Clocks:BOARD_BootClockRUN">
+                     <feature name="enabled" evaluation="equal" configuration="core0">
+                        <data>true</data>
+                     </feature>
+                  </dependency>
+               </dependencies>
+               <clock_sources>
+                  <clock_source id="XTALOSC24M.RTC_OSC.outFreq" value="32.768 kHz" locked="false" enabled="true"/>
+               </clock_sources>
+               <clock_outputs>
+                  <clock_output id="AHB_CLK_ROOT.outFreq" value="600 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CAN_CLK_ROOT.outFreq" value="40 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CKIL_SYNC_CLK_ROOT.outFreq" value="32.768 kHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_1M.outFreq" value="1 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CLK_24M.outFreq" value="24 MHz" locked="false" accuracy=""/>
+                  <clock_output id="CSI_CLK_ROOT.outFreq" value="12 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET2_125M_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_125M_CLK.outFreq" value="2.4 MHz" locked="false" accuracy=""/>
+                  <clock_output id="ENET_25M_REF_CLK.outFreq" value="1.2 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO1_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXIO2_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI2_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="FLEXSPI_CLK_ROOT.outFreq" value="1440/11 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT1_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="GPT2_ipg_clk_highfreq.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="IPG_CLK_ROOT.outFreq" value="150 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LCDIF_CLK_ROOT.outFreq" value="67.5 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPI2C_CLK_ROOT.outFreq" value="60 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LPSPI_CLK_ROOT.outFreq" value="105.6 MHz" locked="false" accuracy=""/>
+                  <clock_output id="LVDS1_CLK.outFreq" value="1.2 GHz" locked="false" accuracy=""/>
+                  <clock_output id="MQS_MCLK.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PERCLK_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="PLL7_MAIN_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK2.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI1_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI2_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_CLK_ROOT.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK1.outFreq" value="1080/17 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SAI3_MCLK3.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SEMC_CLK_ROOT.outFreq" value="75 MHz" locked="false" accuracy=""/>
+                  <clock_output id="SPDIF0_CLK_ROOT.outFreq" value="30 MHz" locked="false" accuracy=""/>
+                  <clock_output id="TRACE_CLK_ROOT.outFreq" value="132 MHz" locked="false" accuracy=""/>
+                  <clock_output id="UART_CLK_ROOT.outFreq" value="80 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY1_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USBPHY2_CLK.outFreq" value="480 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC1_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+                  <clock_output id="USDHC2_CLK_ROOT.outFreq" value="198 MHz" locked="false" accuracy=""/>
+               </clock_outputs>
+               <clock_settings>
+                  <setting id="CCM.AHB_PODF.scale" value="1" locked="true"/>
+                  <setting id="CCM.ARM_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI2_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.FLEXSPI_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.FLEXSPI_SEL.sel" value="CCM_ANALOG.PLL3_PFD0_CLK" locked="false"/>
+                  <setting id="CCM.LCDIF_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM.LCDIF_PRED.scale" value="2" locked="true"/>
+                  <setting id="CCM.LPSPI_PODF.scale" value="5" locked="true"/>
+                  <setting id="CCM.PERCLK_PODF.scale" value="2" locked="true"/>
+                  <setting id="CCM.SEMC_PODF.scale" value="8" locked="false"/>
+                  <setting id="CCM.TRACE_CLK_SEL.sel" value="CCM_ANALOG.PLL2_MAIN_CLK" locked="false"/>
+                  <setting id="CCM.TRACE_PODF.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_BYPASS.sel" value="CCM_ANALOG.PLL1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL1_PREDIV.scale" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL1_VDIV.scale" value="50" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.denom" value="1" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2.num" value="0" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL2_BYPASS.sel" value="CCM_ANALOG.PLL2_OUT_CLK" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL2_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL2_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_BYPASS.sel" value="CCM_ANALOG.PLL3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_DIV.scale" value="33" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD0_MUL.scale" value="18" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD1_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD2_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD2" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL3_PFD3_BYPASS.sel" value="CCM_ANALOG.PLL3_PFD3" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.denom" value="50" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL4.div" value="47" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.denom" value="1" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5.div" value="31" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL5.num" value="0" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_BYPASS.sel" value="CCM_ANALOG.PLL5_POST_DIV" locked="false"/>
+                  <setting id="CCM_ANALOG.PLL5_POST_DIV.scale" value="2" locked="true"/>
+                  <setting id="CCM_ANALOG.PLL7_BYPASS.sel" value="CCM_ANALOG.PLL7" locked="false"/>
+                  <setting id="CCM_ANALOG.VIDEO_DIV.scale" value="4" locked="true"/>
+                  <setting id="CCM_ANALOG_PLL_ENET_POWERDOWN_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB1_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_EN_USB_CLKS_OUT_CFG" value="Enabled" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_USB2_POWER_CFG" value="Yes" locked="false"/>
+                  <setting id="CCM_ANALOG_PLL_VIDEO_POWERDOWN_CFG" value="No" locked="false"/>
+               </clock_settings>
+               <called_from_default_init>true</called_from_default_init>
+            </clock_configuration>
+         </clock_configurations>
+      </clocks>
+      <dcdx name="DCDx" version="3.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <dcdx_profile>
+            <processor_version>0.0.0</processor_version>
+         </dcdx_profile>
+         <dcdx_configurations/>
+      </dcdx>
+      <periphs name="Peripherals" version="12.0" enabled="true" update_project_code="true">
+         <generated_project_files>
+            <file path="board/peripherals.c" update_enabled="true"/>
+            <file path="board/peripherals.h" update_enabled="true"/>
+         </generated_project_files>
+         <peripherals_profile>
+            <processor_version>13.0.2</processor_version>
+         </peripherals_profile>
+         <functional_groups>
+            <functional_group name="BOARD_InitPeripherals" uuid="96c1cec6-3bd3-47a2-8301-f38e4b0dd25f" called_from_default_init="true" id_prefix="" core="core0">
+               <description></description>
+               <options/>
+               <dependencies/>
+               <instances>
+                  <instance name="CAN" uuid="eb0900eb-d552-4097-9dcf-a07e592a887f" type="flexcan" type_id="flexcan_ba45456ec815807245205237e2bf425b" mode="interrupts" peripheral="CAN2" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="interruptsCfg">
+                        <setting name="messageBufferIrqs" value="0"/>
+                        <setting name="messageBufferIrqs2" value="0"/>
+                        <set name="interruptsEnable">
+                           <selected/>
+                        </set>
+                        <setting name="enable_irq" value="false"/>
+                        <struct name="interrupt_shared">
+                           <setting name="IRQn" value="CAN2_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="fsl_flexcan" quick_selection="default">
+                        <struct name="can_config">
+                           <setting name="clockSource" value="kFLEXCAN_ClkSrcOsc"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="baudRate" value="1000000"/>
+                           <setting name="maxMbNum" value="16"/>
+                           <setting name="enableLoopBack" value="false"/>
+                           <setting name="enableSelfWakeup" value="false"/>
+                           <setting name="enableIndividMask" value="false"/>
+                           <struct name="timingConfig">
+                              <setting name="propSeg" value="2"/>
+                              <setting name="phaseSeg1" value="4"/>
+                              <setting name="phaseSeg2" value="3"/>
+                              <setting name="rJumpwidth" value="2"/>
+                              <struct name="bitTime"/>
+                           </struct>
+                        </struct>
+                        <setting name="enableRxFIFO" value="false"/>
+                        <struct name="rxFIFO">
+                           <setting name="idFilterTable" value=""/>
+                           <setting name="idFilterNum" value="num0"/>
+                           <setting name="idFilterType" value="kFLEXCAN_RxFifoFilterTypeA"/>
+                           <setting name="priority" value="kFLEXCAN_RxFifoPrioLow"/>
+                        </struct>
+                        <array name="channels">
+                           <struct name="0">
+                              <setting name="mbID" value="0"/>
+                              <setting name="mbType" value="mbRx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                           <struct name="1">
+                              <setting name="mbID" value="1"/>
+                              <setting name="mbType" value="mbTx"/>
+                              <struct name="rxMb">
+                                 <setting name="id" value="0"/>
+                                 <setting name="format" value="kFLEXCAN_FrameFormatStandard"/>
+                                 <setting name="type" value="kFLEXCAN_FrameTypeData"/>
+                              </struct>
+                           </struct>
+                        </array>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI" uuid="f67d9a64-c26d-4421-9805-a062b24146f2" type="csi" type_id="csi_3739ec1355c7b915be929f3b7e35095b" mode="interrupt" peripheral="CSI" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_csi" quick_selection="QuickSelection1">
+                        <struct name="clockConfig">
+                           <setting name="clockSource" value="BusInterfaceClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <setting name="masterClockSource" value="CsiClock"/>
+                           <setting name="masterClockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        </struct>
+                        <struct name="config">
+                           <setting name="format" value="RGB565"/>
+                           <setting name="i_width" value="320"/>
+                           <setting name="i_height" value="240"/>
+                           <setting name="dataBus" value="kCSI_DataBus8Bit"/>
+                           <setting name="workMode" value="kCSI_GatedClockMode"/>
+                           <setting name="useExtVsync" value="true"/>
+                           <set name="polarityFlags">
+                              <selected/>
+                           </set>
+                           <struct name="buffers_config">
+                              <setting name="bufferName" value="defaultBuffer"/>
+                              <setting name="bufCount" value="4"/>
+                              <setting name="bufferAlign" value="64"/>
+                           </struct>
+                        </struct>
+                        <struct name="interruptsCfg">
+                           <setting name="isInterruptEnabled" value="false"/>
+                           <set name="interruptSources">
+                              <selected/>
+                           </set>
+                           <struct name="interrupt">
+                              <setting name="IRQn" value="CSI_IRQn"/>
+                              <setting name="enable_interrrupt" value="enabled"/>
+                              <setting name="enable_priority" value="false"/>
+                              <setting name="priority" value="0"/>
+                              <setting name="enable_custom_name" value="false"/>
+                           </struct>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="CSI_LPI2C" uuid="f2c6cd0a-751c-4424-9248-a4d98da47de7" type="lpi2c" type_id="lpi2c_db68d4f4f06a22e25ab51fe9bd6db4d2" mode="master" peripheral="LPI2C1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="main" quick_selection="qs_interrupt">
+                        <setting name="clockSource" value="Lpi2cClock"/>
+                        <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LPI2C1_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                     <config_set name="master" quick_selection="qs_master_transfer">
+                        <setting name="mode" value="transfer"/>
+                        <struct name="config">
+                           <setting name="enableMaster" value="true"/>
+                           <setting name="enableDoze" value="true"/>
+                           <setting name="debugEnable" value="false"/>
+                           <setting name="ignoreAck" value="false"/>
+                           <setting name="pinConfig" value="kLPI2C_2PinOpenDrain"/>
+                           <setting name="baudRate_Hz" value="100000"/>
+                           <setting name="busIdleTimeout_ns" value="0"/>
+                           <setting name="pinLowTimeout_ns" value="0"/>
+                           <setting name="sdaGlitchFilterWidth_ns" value="0"/>
+                           <setting name="sclGlitchFilterWidth_ns" value="0"/>
+                           <struct name="hostRequest">
+                              <setting name="enable" value="false"/>
+                              <setting name="source" value="kLPI2C_HostRequestExternalPin"/>
+                              <setting name="polarity" value="kLPI2C_HostRequestPinActiveHigh"/>
+                           </struct>
+                           <set name="edmaRequestSources">
+                              <selected/>
+                           </set>
+                        </struct>
+                        <struct name="transfer">
+                           <setting name="blocking" value="false"/>
+                           <setting name="enable_custom_handle" value="false"/>
+                           <struct name="callback">
+                              <setting name="name" value=""/>
+                              <setting name="userData" value=""/>
+                           </struct>
+                           <set name="flags">
+                              <selected/>
+                           </set>
+                           <setting name="slaveAddress" value="0"/>
+                           <setting name="direction" value="kLPI2C_Write"/>
+                           <setting name="subaddress" value="0"/>
+                           <setting name="subaddressSize" value="1"/>
+                           <setting name="blocking_buffer" value="false"/>
+                           <setting name="enable_custom_buffer" value="false"/>
+                           <setting name="dataSize" value="1"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="DEBUG_UART" uuid="01f250e2-83d7-4b7b-a98d-772d1c3bdb42" type="lpuart" type_id="lpuart_bf01db7d964092f3cf860852cba17f7e" mode="polling" peripheral="LPUART1" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="lpuartConfig_t">
+                        <struct name="lpuartConfig">
+                           <setting name="clockSource" value="LpuartClock"/>
+                           <setting name="lpuartSrcClkFreq" value="BOARD_BootClockRUN"/>
+                           <setting name="baudRate_Bps" value="115200"/>
+                           <setting name="parityMode" value="kLPUART_ParityDisabled"/>
+                           <setting name="dataBitsCount" value="kLPUART_EightDataBits"/>
+                           <setting name="isMsb" value="false"/>
+                           <setting name="stopBitCount" value="kLPUART_OneStopBit"/>
+                           <setting name="enableMatchAddress1" value="false"/>
+                           <setting name="matchAddress1" value="0"/>
+                           <setting name="enableMatchAddress2" value="false"/>
+                           <setting name="matchAddress2" value="0"/>
+                           <setting name="txFifoWatermark" value="0"/>
+                           <setting name="rxFifoWatermark" value="1"/>
+                           <setting name="enableRxRTS" value="false"/>
+                           <setting name="enableTxCTS" value="false"/>
+                           <setting name="txCtsSource" value="kLPUART_CtsSourcePin"/>
+                           <setting name="txCtsConfig" value="kLPUART_CtsSampleAtStart"/>
+                           <setting name="rxIdleType" value="kLPUART_IdleTypeStartBit"/>
+                           <setting name="rxIdleConfig" value="kLPUART_IdleCharacter1"/>
+                           <setting name="enableTx" value="true"/>
+                           <setting name="enableRx" value="true"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="LCD" uuid="90a0c31d-6042-4687-af0f-0892536bc1ba" type="elcdif" type_id="elcdif_1c39bcb43ed1a24bc8980672c7378576" mode="rgbMode" peripheral="LCDIF" enabled="false" comment="" custom_name_enabled="true" editing_lock="false">
+                     <config_set name="fsl_elcdif">
+                        <struct name="config">
+                           <setting name="panelWidthInt" value="480"/>
+                           <setting name="panelHeightInt" value="272"/>
+                           <setting name="hsw" value="41"/>
+                           <setting name="hfp" value="4"/>
+                           <setting name="hbp" value="8"/>
+                           <setting name="vsw" value="10"/>
+                           <setting name="vfp" value="4"/>
+                           <setting name="vbp" value="3"/>
+                           <setting name="frameRate" value="60 Hz"/>
+                           <setting name="clockSource" value="LcdIfClock"/>
+                           <setting name="clockSourceFreq" value="ClocksTool_DefaultInit"/>
+                           <struct name="polarityFlags_st">
+                              <setting name="vSyncActive" value="kELCDIF_VsyncActiveLow"/>
+                              <setting name="hSyncActive" value="kELCDIF_HsyncActiveLow"/>
+                              <setting name="dataEnableActive" value="kELCDIF_DataEnableActiveLow"/>
+                              <setting name="driveDataClkEdge" value="kELCDIF_DriveDataOnFallingClkEdge"/>
+                           </struct>
+                           <setting name="bufferName" value="defaultBuffer"/>
+                           <setting name="bufferAlign" value="64"/>
+                           <setting name="pixelFormat" value="kELCDIF_PixelFormatRGB565"/>
+                           <setting name="dataBus" value="kELCDIF_DataBus16Bit"/>
+                           <setting name="enablePxpHandShake" value="false"/>
+                           <setting name="start" value="false"/>
+                        </struct>
+                        <setting name="isInterruptEnabled" value="true"/>
+                        <set name="elcdifInterruptSources">
+                           <selected>
+                              <id>kELCDIF_CurFrameDoneInterruptEnable</id>
+                           </selected>
+                        </set>
+                        <struct name="interrupt">
+                           <setting name="IRQn" value="LCDIF_IRQn"/>
+                           <setting name="enable_interrrupt" value="enabled"/>
+                           <setting name="enable_priority" value="false"/>
+                           <setting name="priority" value="0"/>
+                           <setting name="enable_custom_name" value="false"/>
+                        </struct>
+                     </config_set>
+                  </instance>
+                  <instance name="NVIC" uuid="b31fa225-2a52-486b-9c5c-33a184a2c716" type="nvic" type_id="nvic_57b5eef3774cc60acaede6f5b8bddc67" mode="general" peripheral="NVIC" enabled="true" comment="" custom_name_enabled="false" editing_lock="false">
+                     <config_set name="nvic">
+                        <array name="interrupt_table"/>
+                        <array name="interrupts"/>
+                     </config_set>
+                  </instance>
+               </instances>
+            </functional_group>
+         </functional_groups>
+         <components>
+            <component name="system" uuid="aa3cc953-557b-4557-b7fe-6fedc31acf98" type_id="system">
+               <config_set_global name="global_system_definitions">
+                  <setting name="user_definitions" value=""/>
+                  <setting name="user_includes" value=""/>
+               </config_set_global>
+            </component>
+            <component name="msg" uuid="8b3f852e-ee1e-45e9-abff-0ff722f1d65d" type_id="msg">
+               <config_set_global name="global_messages"/>
+            </component>
+            <component name="gpio_adapter_common" uuid="539d282e-5136-4289-9058-9a46b221ca45" type_id="gpio_adapter_common_57579b9ac814fe26bf95df0a384c36b6">
+               <config_set_global name="global_gpio_adapter_common" quick_selection="default"/>
+            </component>
+            <component name="generic_uart" uuid="6e4c02c4-0524-4905-91b5-01d2e2502186" type_id="generic_uart_8cae00565451cf2346eb1b8c624e73a6">
+               <config_set_global name="global_uart"/>
+            </component>
+            <component name="generic_can" uuid="c6d8fd36-2bbd-44c6-a160-54e7e12d0807" type_id="generic_can_1bfdd78b1af214566c1f23cf6a582d80">
+               <config_set_global name="global_can"/>
+            </component>
+            <component name="uart_cmsis_common" uuid="7d3626d3-4536-4838-a35d-3b8cf5a2bd71" type_id="uart_cmsis_common_9cb8e302497aa696fdbb5a4fd622c2a8">
+               <config_set_global name="global_USART_CMSIS_common" quick_selection="default"/>
+            </component>
+            <component name="generic_enet" uuid="738ea8df-6176-4e52-b4c7-b88aa9c17d13" type_id="generic_enet_74db5c914f0ddbe47d86af40cb77a619">
+               <config_set_global name="global_enet"/>
+            </component>
+         </components>
+      </periphs>
+      <tee name="TEE" version="4.0" enabled="false" update_project_code="true">
+         <generated_project_files/>
+         <tee_profile>
+            <processor_version>0.0.0</processor_version>
+         </tee_profile>
+      </tee>
+   </tools>
+</configuration>
diff --git a/hw/bsp/mcx/mcx.jlinkscript b/hw/bsp/imxrt/debug.jlinkscript
index fd8bcffef..fd8bcffef 100644
--- a/hw/bsp/mcx/mcx.jlinkscript
+++ b/hw/bsp/imxrt/debug.jlinkscript
diff --git a/hw/bsp/imxrt/family.c b/hw/bsp/imxrt/family.c
index 735fbdb9b..bfab1d496 100644
--- a/hw/bsp/imxrt/family.c
+++ b/hw/bsp/imxrt/family.c
@@ -91,6 +91,16 @@ void board_init(void)
   BOARD_BootClockRUN();
   SystemCoreClockUpdate();
 
+#ifdef TRACE_ETM
+  // RT1011 ETM pins
+//  IOMUXC_SetPinMux(IOMUXC_GPIO_11_ARM_TRACE3, 0U);
+//  IOMUXC_SetPinMux(IOMUXC_GPIO_12_ARM_TRACE2, 0U);
+//  IOMUXC_SetPinMux(IOMUXC_GPIO_13_ARM_TRACE1, 0U);
+//  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_00_ARM_TRACE0, 0U);
+//  IOMUXC_SetPinMux(IOMUXC_GPIO_AD_02_ARM_TRACE_CLK, 0U);
+//  CLOCK_EnableClock(kCLOCK_Trace);
+#endif
+
   // Enable IOCON clock
   CLOCK_EnableClock(kCLOCK_Iomuxc);
 
@@ -234,21 +244,18 @@ int board_uart_read(uint8_t* buf, int len)
   return count;
 }
 
-int board_uart_write(void const * buf, int len)
-{
+int board_uart_write(void const * buf, int len) {
   LPUART_WriteBlocking(UART_PORT, (uint8_t const*)buf, len);
   return len;
 }
 
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
-{
+void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void)
-{
+uint32_t board_millis(void) {
   return system_ticks;
 }
 #endif
diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake
index 4a9842cf9..96ed4b030 100644
--- a/hw/bsp/imxrt/family.cmake
+++ b/hw/bsp/imxrt/family.cmake
@@ -16,77 +16,77 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS MIMXRT1XXX CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
-
 
 #------------------------------------
 # BOARD_TARGET
 #------------------------------------
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
-  if (NOT TARGET ${BOARD_TARGET})
-    add_library(${BOARD_TARGET} STATIC
-      ${SDK_DIR}/drivers/common/fsl_common.c
-      ${SDK_DIR}/drivers/igpio/fsl_gpio.c
-      ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/project_template/clock_config.c
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
-      )
-    target_compile_definitions(${BOARD_TARGET} PUBLIC
-      __ARMVFP__=0
-      __ARMFPV5__=0
-      XIP_EXTERNAL_FLASH=1
-      XIP_BOOT_HEADER_ENABLE=1
-      )
-    target_include_directories(${BOARD_TARGET} PUBLIC
-      ${CMSIS_DIR}/CMSIS/Core/Include
-      ${SDK_DIR}/devices/${MCU_VARIANT}
-      ${SDK_DIR}/devices/${MCU_VARIANT}/project_template
-      ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
-      ${SDK_DIR}/drivers/common
-      ${SDK_DIR}/drivers/igpio
-      ${SDK_DIR}/drivers/lpuart
-      )
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
 
-    update_board(${BOARD_TARGET})
+  add_library(${BOARD_TARGET} STATIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board/clock_config.c
+    #${SDK_DIR}/drivers/adc_12b1msps_sar/fsl_adc.c
+    ${SDK_DIR}/drivers/common/fsl_common.c
+    ${SDK_DIR}/drivers/igpio/fsl_gpio.c
+    ${SDK_DIR}/drivers/lpspi/fsl_lpspi.c
+    ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/xip/fsl_flexspi_nor_boot.c
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    __ARMVFP__=0
+    __ARMFPV5__=0
+    XIP_EXTERNAL_FLASH=1
+    XIP_BOOT_HEADER_ENABLE=1
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/board
+    ${CMSIS_DIR}/CMSIS/Core/Include
+    ${SDK_DIR}/devices/${MCU_VARIANT}
+    ${SDK_DIR}/devices/${MCU_VARIANT}/drivers
+    #${SDK_DIR}/drivers/adc_12b1msps_sar
+    ${SDK_DIR}/drivers/common
+    ${SDK_DIR}/drivers/igpio
+    ${SDK_DIR}/drivers/lpspi
+    ${SDK_DIR}/drivers/lpuart
+    )
 
-    # LD_FILE and STARTUP_FILE can be defined in board.cmake
-    if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
-      set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld)
-      #set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld)
-    endif ()
+  update_board(${BOARD_TARGET})
 
-    if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID})
-      set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S)
-      #set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S)
-    endif ()
+  # LD_FILE and STARTUP_FILE can be defined in board.cmake
+  if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
+    set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld)
+    #set(LD_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_VARIANT}xxxxx_flexspi_nor.ld)
+  endif ()
 
-    target_sources(${BOARD_TARGET} PUBLIC
-      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
-      )
+  if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID})
+    set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S)
+    #set(STARTUP_FILE_IAR ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S)
+  endif ()
+
+  target_sources(${BOARD_TARGET} PUBLIC
+    ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+    )
 
-    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
-      target_link_options(${BOARD_TARGET} PUBLIC
-        "LINKER:--script=${LD_FILE_GNU}"
-        # nanolib
-        --specs=nosys.specs
-        --specs=nano.specs
-        # force linker to look for these symbols
-        -Wl,-uimage_vector_table
-        -Wl,-ug_boot_data
-        )
-    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
-      target_link_options(${BOARD_TARGET} PUBLIC
-        "LINKER:--config=${LD_FILE_IAR}"
-        )
-    endif ()
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      # nanolib
+      --specs=nosys.specs
+      --specs=nano.specs
+      # force linker to look for these symbols
+      -Wl,-uimage_vector_table
+      -Wl,-ug_boot_data
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
   endif ()
 endfunction()
 
@@ -94,8 +94,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -115,8 +115,8 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX)
-  target_sources(${TARGET}-tinyusb PUBLIC
+  family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX ${RTOS})
+  target_sources(${TARGET}-tinyusb PRIVATE
     ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c
     ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c
     ${TOP}/src/portable/ehci/ehci.c
@@ -130,16 +130,3 @@ function(family_configure_example TARGET)
   family_flash_jlink(${TARGET})
   #family_flash_nxplink(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/imxrt/family.mk b/hw/bsp/imxrt/family.mk
index d0bb5be17..9eb541473 100644
--- a/hw/bsp/imxrt/family.mk
+++ b/hw/bsp/imxrt/family.mk
@@ -5,7 +5,6 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
 include $(TOP)/$(BOARD_PATH)/board.mk
 
 CPU_CORE ?= cortex-m7
-include $(TOP)/tools/make/cpu/$(CPU_CORE).mk
 
 CFLAGS += \
   -D__ARMVFP__=0 \
@@ -17,6 +16,7 @@ CFLAGS += \
 ifdef BOARD_TUD_RHPORT
 CFLAGS += -DBOARD_TUD_RHPORT=$(BOARD_TUD_RHPORT)
 endif
+
 ifdef BOARD_TUH_RHPORT
 CFLAGS += -DBOARD_TUH_RHPORT=$(BOARD_TUH_RHPORT)
 endif
diff --git a/hw/bsp/kinetis_k32l/boards/frdm_k32l2a4s/board.h b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h
index b1f38c997..b1f38c997 100644
--- a/hw/bsp/kinetis_k32l/boards/frdm_k32l2a4s/board.h
+++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h
diff --git a/hw/bsp/kinetis_k32l/boards/frdm_k32l2a4s/board.mk b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk
index d96ab58b8..f69700139 100644
--- a/hw/bsp/kinetis_k32l/boards/frdm_k32l2a4s/board.mk
+++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.mk
@@ -1,8 +1,6 @@
 MCU = K32L2A41A
 
-CFLAGS += \
-  -mcpu=cortex-m0plus \
-  -DCPU_K32L2A41VLH1A \
+CFLAGS += -DCPU_K32L2A41VLH1A
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls -Wno-error=cast-qual
@@ -13,9 +11,6 @@ LD_FILE = $(MCU_DIR)/gcc/K32L2A41xxxxA_flash.ld
 SRC_C += \
 	$(MCU_DIR)/project_template/clock_config.c \
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
-
 # For flash-jlink target
 JLINK_DEVICE = K32L2A41xxxxA
 
diff --git a/hw/bsp/kinetis_k32l/boards/frdm_k32l2a4s/frdm_k32l2a4s.c b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/frdm_k32l2a4s.c
index 80830163b..80830163b 100644
--- a/hw/bsp/kinetis_k32l/boards/frdm_k32l2a4s/frdm_k32l2a4s.c
+++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/frdm_k32l2a4s.c
diff --git a/hw/bsp/kinetis_k32l/boards/frdm_k32l2b/board.h b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h
index 8d21fdcd4..8d21fdcd4 100644
--- a/hw/bsp/kinetis_k32l/boards/frdm_k32l2b/board.h
+++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h
diff --git a/hw/bsp/kinetis_k32l/boards/frdm_k32l2b/board.mk b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.mk
index 5f8ecbfe4..82456b721 100644
--- a/hw/bsp/kinetis_k32l/boards/frdm_k32l2b/board.mk
+++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.mk
@@ -1,8 +1,6 @@
 MCU = K32L2B31A
 
-CFLAGS += \
-  -mcpu=cortex-m0plus \
-  -DCPU_K32L2B31VLH0A \
+CFLAGS += -DCPU_K32L2B31VLH0A
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls
@@ -13,9 +11,6 @@ LD_FILE = $(MCU_DIR)/gcc/K32L2B31xxxxA_flash.ld
 SRC_C += \
 	$(MCU_DIR)/project_template/clock_config.c \
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
-
 # For flash-jlink target
 JLINK_DEVICE = K32L2B31xxxxA
 
diff --git a/hw/bsp/kinetis_k32l/boards/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c
index 1566b4e2e..1566b4e2e 100644
--- a/hw/bsp/kinetis_k32l/boards/frdm_k32l2b/frdm_k32l2b.c
+++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c
diff --git a/hw/bsp/kinetis_k32l/boards/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kinetis_k32l2/boards/kuiic/K32L2B31xxxxA_flash.ld
index f478a99c7..f478a99c7 100644
--- a/hw/bsp/kinetis_k32l/boards/kuiic/K32L2B31xxxxA_flash.ld
+++ b/hw/bsp/kinetis_k32l2/boards/kuiic/K32L2B31xxxxA_flash.ld
diff --git a/hw/bsp/kinetis_k32l/boards/kuiic/board.h b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h
index 1e2d4f18b..1e2d4f18b 100644
--- a/hw/bsp/kinetis_k32l/boards/kuiic/board.h
+++ b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h
diff --git a/hw/bsp/kinetis_k32l/boards/kuiic/board.mk b/hw/bsp/kinetis_k32l2/boards/kuiic/board.mk
index 29a12e982..fc5bdeec8 100644
--- a/hw/bsp/kinetis_k32l/boards/kuiic/board.mk
+++ b/hw/bsp/kinetis_k32l2/boards/kuiic/board.mk
@@ -1,11 +1,6 @@
 MCU = K32L2B31A
 
-# This board uses TinyUF2 for updates
-UF2_FAMILY_ID = 0x7f83e793
-
-CFLAGS += \
-  -mcpu=cortex-m0plus \
-  -DCPU_K32L2B31VLH0A \
+CFLAGS += -DCPU_K32L2B31VLH0A
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls
@@ -13,9 +8,6 @@ CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls
 # All source paths should be relative to the top level.
 LD_FILE = $(BOARD_PATH)/K32L2B31xxxxA_flash.ld
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
-
 # For flash-jlink target
 JLINK_DEVICE = K32L2B31xxxxA
 
diff --git a/hw/bsp/kinetis_k32l/boards/kuiic/kuiic.c b/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c
index f9002a6d3..f9002a6d3 100644
--- a/hw/bsp/kinetis_k32l/boards/kuiic/kuiic.c
+++ b/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c
diff --git a/hw/bsp/kinetis_k32l/family.mk b/hw/bsp/kinetis_k32l2/family.mk
index 41f22e250..357485762 100644
--- a/hw/bsp/kinetis_k32l/family.mk
+++ b/hw/bsp/kinetis_k32l2/family.mk
@@ -1,13 +1,13 @@
+UF2_FAMILY_ID = 0x7f83e793
 SDK_DIR = hw/mcu/nxp/mcux-sdk
 DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
-
 MCU_DIR = $(SDK_DIR)/devices/$(MCU)
+
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
-  -mthumb \
-  -mabi=aapcs \
-	-DCFG_TUSB_MCU=OPT_MCU_KINETIS_K32
+	-DCFG_TUSB_MCU=OPT_MCU_KINETIS_K32L
 
 SRC_C += \
 	src/portable/nxp/khci/dcd_khci.c \
diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake
index 5d4165185..793ef1783 100644
--- a/hw/bsp/kinetis_kl/family.cmake
+++ b/hw/bsp/kinetis_kl/family.cmake
@@ -16,13 +16,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS KINETIS_KL CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
-
 
 #------------------------------------
 # BOARD_TARGET
@@ -78,8 +71,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -99,7 +92,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL)
+  family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c
     ${TOP}/src/portable/nxp/khci/hcd_khci.c
@@ -113,16 +106,3 @@ function(family_configure_example TARGET)
   family_flash_jlink(${TARGET})
   #family_flash_nxplink(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/kinetis_kl/family.mk b/hw/bsp/kinetis_kl/family.mk
index 2bed6b486..edb2f3366 100644
--- a/hw/bsp/kinetis_kl/family.mk
+++ b/hw/bsp/kinetis_kl/family.mk
@@ -3,11 +3,9 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
 
 MCU_DIR = $(SDK_DIR)/devices/$(MCU)
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
   -DCFG_TUSB_MCU=OPT_MCU_KINETIS_KL \
 
 LDFLAGS += \
@@ -34,6 +32,3 @@ INC += \
 	$(TOP)/$(SDK_DIR)/drivers/port \
 	$(TOP)/$(SDK_DIR)/drivers/smc \
 	$(TOP)/$(SDK_DIR)/drivers/uart \
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
diff --git a/hw/bsp/lpc11/family.mk b/hw/bsp/lpc11/family.mk
index eb427c09d..dee85da90 100644
--- a/hw/bsp/lpc11/family.mk
+++ b/hw/bsp/lpc11/family.mk
@@ -2,12 +2,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
 
 MCU_DIR = hw/mcu/nxp/lpcopen/lpc$(MCU)/lpc_chip_$(MCU)
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
   -nostdlib \
   -D__USE_LPCOPEN \
   -DCFG_TUSB_MCU=OPT_MCU_LPC11UXX \
@@ -36,8 +34,5 @@ endif
 INC += \
 	$(TOP)/$(MCU_DIR)/inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
-
 # For flash-jlink target
 JLINK_DEVICE = LPC11U68
diff --git a/hw/bsp/lpc13/family.mk b/hw/bsp/lpc13/family.mk
index 28f98e4ca..10cf4969d 100644
--- a/hw/bsp/lpc13/family.mk
+++ b/hw/bsp/lpc13/family.mk
@@ -2,12 +2,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
 
 MCU_DIR = hw/mcu/nxp/lpcopen/lpc13xx/lpc_chip_13xx
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m3
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m3 \
   -nostdlib \
   -DCORE_M3 \
   -D__USE_LPCOPEN \
@@ -34,6 +32,3 @@ SRC_C += \
 
 INC += \
 	$(TOP)/$(MCU_DIR)/inc
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3
diff --git a/hw/bsp/lpc15/family.mk b/hw/bsp/lpc15/family.mk
index 0ad1220d6..9f489832f 100644
--- a/hw/bsp/lpc15/family.mk
+++ b/hw/bsp/lpc15/family.mk
@@ -1,12 +1,10 @@
 DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m3
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m3 \
   -nostdlib \
   -DCORE_M3 \
   -D__USE_LPCOPEN \
@@ -34,6 +32,3 @@ SRC_C += \
 INC += \
 	$(TOP)/$(BOARD_PATH) \
 	$(TOP)/$(MCU_DIR)/inc
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3
diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk
index af01b55a8..abf6abe13 100644
--- a/hw/bsp/lpc17/family.mk
+++ b/hw/bsp/lpc17/family.mk
@@ -2,12 +2,10 @@ DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
 
 MCU_DIR = hw/mcu/nxp/lpcopen/lpc175x_6x/lpc_chip_175x_6x
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m3
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m3 \
   -nostdlib \
   -DCORE_M3 \
   -D__USE_LPCOPEN \
@@ -35,6 +33,3 @@ SRC_C += \
 
 INC += \
 	$(TOP)/$(MCU_DIR)/inc
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3
diff --git a/hw/bsp/lpc18/boards/mcb1800/board.h b/hw/bsp/lpc18/boards/mcb1800/board.h
index 6111da975..93b3cd112 100644
--- a/hw/bsp/lpc18/boards/mcb1800/board.h
+++ b/hw/bsp/lpc18/boards/mcb1800/board.h
@@ -41,10 +41,17 @@
 
 #define UART_DEV      LPC_USART3
 
-static inline void board_lpc18_pinmux(void)
-{
-  const PINMUX_GRP_T pinmuxing[] =
-  {
+static inline void board_lpc18_pinmux(void) {
+  const PINMUX_GRP_T pinmuxing[] = {
+    // ETM Trace
+    #ifdef TRACE_ETM
+    { 0xF, 4, SCU_MODE_FUNC2 | SCU_MODE_HIGHSPEEDSLEW_EN },
+    { 0xF, 5, SCU_MODE_FUNC3 | SCU_MODE_HIGHSPEEDSLEW_EN },
+    { 0xF, 6, SCU_MODE_FUNC3 | SCU_MODE_HIGHSPEEDSLEW_EN },
+    { 0xF, 7, SCU_MODE_FUNC3 | SCU_MODE_HIGHSPEEDSLEW_EN },
+    { 0xF, 8, SCU_MODE_FUNC3 | SCU_MODE_HIGHSPEEDSLEW_EN },
+    #endif
+
     // LEDs
     { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) },
     { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) },
@@ -64,7 +71,6 @@ static inline void board_lpc18_pinmux(void)
 
     // USB0
     { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 },		                // P6_3 USB0_PWR_EN, USB0 VBus function
-
     { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 },			              // P9_5 USB1_VBUS_EN, USB1 VBus function
     { 0x2, 5, SCU_MODE_INACT  | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION
   };
@@ -72,8 +78,7 @@ static inline void board_lpc18_pinmux(void)
   Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
 
   /* Pin clock mux values, re-used structure, value in first index is meaningless */
-  const PINMUX_GRP_T pinclockmuxing[] =
-  {
+  const PINMUX_GRP_T pinclockmuxing[] = {
     { 0, 0,  (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)},
     { 0, 1,  (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)},
     { 0, 2,  (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)},
@@ -81,8 +86,7 @@ static inline void board_lpc18_pinmux(void)
   };
 
   /* Clock pins only, group field not used */
-  for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++)
-  {
+  for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) {
     Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc);
   }
 }
diff --git a/hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug b/hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug
new file mode 100644
index 000000000..6e298c62d
--- /dev/null
+++ b/hw/bsp/lpc18/boards/mcb1800/ozone/lpc1857.jdebug
@@ -0,0 +1,36 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  Project.AddSvdFile ("Cortex-M3.svd");
+  Project.AddSvdFile ("./LPC18xx.svd");
+
+  Project.SetDevice ("LPC1857");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("50 MHz");
+
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-mcb1800/cdc_msc.elf");
+}
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+  //
+  // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
+  //
+  // Project.SetJLinkScript("./NXP_LPC1857JET256_TraceExample.pex");
+}
diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c
index 57f9d55da..2fd69c84b 100644
--- a/hw/bsp/lpc18/family.c
+++ b/hw/bsp/lpc18/family.c
@@ -69,7 +69,6 @@ void USB1_IRQHandler(void)
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
 
-
 /* System configuration variables used by chip driver */
 const uint32_t OscRateIn = 12000000;
 const uint32_t ExtRateIn = 0;
@@ -84,7 +83,15 @@ void SystemInit(void)
 #endif
 
   board_lpc18_pinmux();
-  Chip_SetupXtalClocking();
+
+  #ifdef TRACE_ETM
+  // Trace clock is limited to 60MHz, limit CPU clock to 120MHz
+  Chip_SetupCoreClock(CLKIN_CRYSTAL, 120000000UL, true);
+  #else
+  // CPU clock max to 180 Mhz
+  Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true);
+  #endif
+
 }
 
 void board_init(void)
diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake
index 4e6e2b56d..74a794bde 100644
--- a/hw/bsp/lpc18/family.cmake
+++ b/hw/bsp/lpc18/family.cmake
@@ -15,13 +15,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS LPC18XX CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
-
 
 #------------------------------------
 # BOARD_TARGET
@@ -70,8 +63,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -91,7 +84,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX)
+  family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c
     ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c
@@ -106,16 +99,3 @@ function(family_configure_example TARGET)
   family_flash_jlink(${TARGET})
   #family_flash_nxplink(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk
index fbe6ad834..9d0f85c20 100644
--- a/hw/bsp/lpc18/family.mk
+++ b/hw/bsp/lpc18/family.mk
@@ -1,12 +1,10 @@
 DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m3
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m3 \
   -nostdlib \
   -DCORE_M3 \
   -D__USE_LPCOPEN \
@@ -32,6 +30,3 @@ INC += \
 	$(TOP)/$(BOARD_PATH) \
 	$(TOP)/$(MCU_DIR)/inc \
 	$(TOP)/$(MCU_DIR)/inc/config_18xx
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3
diff --git a/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..96611ca1c
--- /dev/null
+++ b/hw/bsp/lpc40/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "chip.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       5
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.cmake b/hw/bsp/lpc40/boards/ea4088_quickstart/board.cmake
new file mode 100644
index 000000000..7f281d5f6
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.cmake
@@ -0,0 +1,9 @@
+set(JLINK_DEVICE LPC4088)
+set(PYOCD_TARGET LPC4088)
+set(NXPLINK_DEVICE LPC4088:LPC4088)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/lpc4088.ld)
+
+function(update_board TARGET)
+  # nothing to do
+endfunction()
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.h b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h
new file mode 100644
index 000000000..d5489c154
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.h
@@ -0,0 +1,74 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef EA4088QS__BOARD_H
+#define EA4088QS__BOARD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED_PORT      2
+#define LED_PIN       19
+
+#define BUTTON_PORT   2
+#define BUTTON_PIN    10
+#define BUTTON_ACTIV_STATE 0
+
+/* System oscillator rate and RTC oscillator rate */
+const uint32_t OscRateIn = 12000000;
+const uint32_t RTCOscRateIn = 32768;
+
+/* Pin muxing configuration */
+static const PINMUX_GRP_T pinmuxing[] = {
+    // LED
+    { 2, 19, (IOCON_FUNC0 | IOCON_MODE_INACT) },
+
+    // Button
+    { 2, 10, (IOCON_FUNC0 | IOCON_MODE_INACT | IOCON_MODE_PULLUP) },
+
+    // USB1 as Host
+    { 0, 29, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // D+1
+    { 0, 30, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // D-1
+    { 1, 18, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // UP LED1
+    { 1, 19, (IOCON_FUNC2 | IOCON_MODE_INACT) }, // PPWR1
+//  {2, 14, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // VBUS1
+//  {2, 15, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // OVRCR1
+
+    // USB2 as Device
+    { 0, 31, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // D+2
+    { 0, 13, (IOCON_FUNC1 | IOCON_MODE_INACT) }, // UP LED
+    { 0, 14, (IOCON_FUNC3 | IOCON_MODE_INACT) }, // CONNECT2
+
+    /* VBUS is not connected on this board, so leave the pin at default setting. */
+    /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/board.mk b/hw/bsp/lpc40/boards/ea4088_quickstart/board.mk
new file mode 100644
index 000000000..d0bb4fe8c
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/board.mk
@@ -0,0 +1,8 @@
+
+LD_FILE = $(BOARD_PATH)/lpc4088.ld
+
+# For flash-jlink target
+JLINK_DEVICE = LPC4088
+
+# flash using jlink
+flash: flash-jlink
diff --git a/hw/bsp/ea4088qs/lpc4088.ld b/hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld
index 5897707f6..5897707f6 100644
--- a/hw/bsp/ea4088qs/lpc4088.ld
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/lpc4088.ld
diff --git a/hw/bsp/lpc40/boards/ea4088_quickstart/ozone/ea4088_quickstart.jdebug b/hw/bsp/lpc40/boards/ea4088_quickstart/ozone/ea4088_quickstart.jdebug
new file mode 100644
index 000000000..6aaf1076d
--- /dev/null
+++ b/hw/bsp/lpc40/boards/ea4088_quickstart/ozone/ea4088_quickstart.jdebug
@@ -0,0 +1,238 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  Edit.SysVar (VAR_POWER_SAMPLING_SPEED, FREQ_100_KHZ);
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M4F.svd");
+  Project.AddSvdFile ("../../../../../../../cmsis-svd/data/NXP/LPC408x_7x_v0.7.svd");
+
+  Project.SetDevice ("LPC4088");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("50 MHz");
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  // User settings
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ea4088-quickstart/cdc_msc.elf");
+}
+
+/*********************************************************************
+*
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging a RAM program on a Cortex-M target device
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  Exec.Reset();
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//
+//    Util.Log("Resetting Program.");
+//
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}
diff --git a/hw/bsp/ea4088qs/ea4088qs.c b/hw/bsp/lpc40/family.c
index ace72fef0..829df4ac7 100644
--- a/hw/bsp/ea4088qs/ea4088qs.c
+++ b/hw/bsp/lpc40/family.c
@@ -25,89 +25,60 @@
  */
 
 #include "chip.h"
-#include "../board.h"
+#include "bsp/board.h"
+#include "board.h"
 
 //--------------------------------------------------------------------+
 // USB Interrupt Handler
 //--------------------------------------------------------------------+
-void USB_IRQHandler(void)
-{
+void USB_IRQHandler(void) {
   #if CFG_TUD_ENABLED
-    tud_int_handler(0);
+  tud_int_handler(0);
   #endif
 
   #if CFG_TUH_ENABLED
-    tuh_int_handler(0);
+  tuh_int_handler(0);
   #endif
 }
 
 //--------------------------------------------------------------------+
 // MACRO TYPEDEF CONSTANT ENUM DECLARATION
 //--------------------------------------------------------------------+
-#define LED_PORT      2
-#define LED_PIN       19
-
-#define BUTTON_PORT   2
-#define BUTTON_PIN    10
-
-/* System oscillator rate and RTC oscillator rate */
-const uint32_t OscRateIn = 12000000;
-const uint32_t RTCOscRateIn = 32768;
-
-/* Pin muxing configuration */
-static const PINMUX_GRP_T pinmuxing[] =
-{
-  // LED
-  {2, 19, (IOCON_FUNC0 | IOCON_MODE_INACT)},
-
-  // Button
-  {2, 10, (IOCON_FUNC0 | IOCON_MODE_INACT | IOCON_MODE_PULLUP)},
-};
-
-static const PINMUX_GRP_T pin_usb_mux[] =
-{
-  // USB1 as Host
-  {0, 29, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+1
-  {0, 30, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D-1
-  {1, 18, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED1
-  {1, 19, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // PPWR1
-//  {2, 14, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // VBUS1
-//  {2, 15, (IOCON_FUNC2 | IOCON_MODE_INACT)}, // OVRCR1
-
-  // USB2 as Device
-  {0, 31, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // D+2
-  {0, 13, (IOCON_FUNC1 | IOCON_MODE_INACT)}, // UP LED
-  {0, 14, (IOCON_FUNC3 | IOCON_MODE_INACT)}, // CONNECT2
-
-  /* VBUS is not connected on this board, so leave the pin at default setting. */
-  /*Chip_IOCON_PinMux(LPC_IOCON, 1, 30, IOCON_MODE_INACT, IOCON_FUNC2);*/ /* USB VBUS */
-};
 
 // Invoked by startup code
-void SystemInit(void)
-{
+void SystemInit(void) {
 #ifdef __USE_LPCOPEN
-	extern void (* const g_pfnVectors[])(void);
+  extern void (*const g_pfnVectors[])(void);
   unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08;
-	*pSCB_VTOR = (unsigned int) g_pfnVectors;
+  *pSCB_VTOR = (unsigned int) g_pfnVectors;
 
-#if __FPU_USED == 1
-	fpuInit();
-#endif
+  #if __FPU_USED == 1
+  fpuInit();
+  #endif
 #endif // __USE_LPCOPEN
 
   Chip_IOCON_Init(LPC_IOCON);
   Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
 
-	/* CPU clock source starts with IRC */
-	/* Enable PBOOST for CPU clock over 100MHz */
-	Chip_SYSCTL_EnableBoost();
+#ifdef TRACE_ETM
+  const PINMUX_GRP_T trace_pinmux[] = {
+      {2, 2, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 3, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 4, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 5, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+      {2, 6, IOCON_FUNC5 | IOCON_FASTSLEW_EN },
+  };
+  Chip_IOCON_SetPinMuxing(LPC_IOCON, trace_pinmux, sizeof(trace_pinmux) / sizeof(PINMUX_GRP_T));
+#endif
+
+  /* CPU clock source starts with IRC */
+  /* Enable PBOOST for CPU clock over 100MHz */
+  Chip_SYSCTL_EnableBoost();
 
   Chip_SetupXtalClocking();
 }
 
-void board_init(void)
-{
+void board_init(void) {
   SystemCoreClockUpdate();
 
 #if CFG_TUSB_OS == OPT_OS_NONE
@@ -129,15 +100,14 @@ void board_init(void)
   // UART
 
   //------------- USB -------------//
-  Chip_IOCON_SetPinMuxing(LPC_IOCON, pin_usb_mux, sizeof(pin_usb_mux) / sizeof(PINMUX_GRP_T));
 
   // Port1 as Host, Port2: Device
   Chip_USB_Init();
 
   enum {
     USBCLK_DEVCIE = 0x12, // AHB + Device
-    USBCLK_HOST = 0x19 ,  // AHB + OTG + Host
-    USBCLK_ALL  = 0x1B    // Host + Device + OTG + AHB
+    USBCLK_HOST = 0x19,  // AHB + OTG + Host
+    USBCLK_ALL = 0x1B    // Host + Device + OTG + AHB
   };
 
   LPC_USB->OTGClkCtrl = USBCLK_ALL;
@@ -151,40 +121,37 @@ void board_init(void)
 // Board porting API
 //--------------------------------------------------------------------+
 
-void board_led_write(bool state)
-{
+void board_led_write(bool state) {
   Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state);
 }
 
-uint32_t board_button_read(void)
-{
-  // active low
-  return Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN) ? 0 : 1;
+uint32_t board_button_read(void) {
+  return BUTTON_ACTIV_STATE == Chip_GPIO_GetPinState(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
 }
 
-int board_uart_read(uint8_t* buf, int len)
-{
+int board_uart_read(uint8_t *buf, int len) {
   //return UART_ReceiveByte(BOARD_UART_PORT);
-  (void) buf; (void) len;
+  (void) buf;
+  (void) len;
   return 0;
 }
 
-int board_uart_write(void const * buf, int len)
-{
+int board_uart_write(void const *buf, int len) {
   //UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
-  (void) buf; (void) len;
+  (void) buf;
+  (void) len;
   return 0;
 }
 
 #if CFG_TUSB_OS == OPT_OS_NONE
 volatile uint32_t system_ticks = 0;
-void SysTick_Handler (void)
-{
+
+void SysTick_Handler(void) {
   system_ticks++;
 }
 
-uint32_t board_millis(void)
-{
+uint32_t board_millis(void) {
   return system_ticks;
 }
+
 #endif
diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake
new file mode 100644
index 000000000..56eb37a2f
--- /dev/null
+++ b/hw/bsp/lpc40/family.cmake
@@ -0,0 +1,102 @@
+include_guard()
+
+set(SDK_DIR ${TOP}/hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS LPC18XX CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (TARGET ${BOARD_TARGET})
+    return()
+  endif ()
+
+  add_library(${BOARD_TARGET} STATIC
+    ${SDK_DIR}/../gcc/cr_startup_lpc40xx.c
+    ${SDK_DIR}/src/chip_17xx_40xx.c
+    ${SDK_DIR}/src/clock_17xx_40xx.c
+    ${SDK_DIR}/src/fpu_init.c
+    ${SDK_DIR}/src/gpio_17xx_40xx.c
+    ${SDK_DIR}/src/iocon_17xx_40xx.c
+    ${SDK_DIR}/src/sysctl_17xx_40xx.c
+    ${SDK_DIR}/src/sysinit_17xx_40xx.c
+    ${SDK_DIR}/src/uart_17xx_40xx.c
+    )
+  target_compile_options(${BOARD_TARGET} PUBLIC
+    -nostdlib
+    )
+  target_compile_definitions(${BOARD_TARGET} PUBLIC
+    __USE_LPCOPEN
+    CORE_M4
+    CFG_TUSB_MEM_SECTION=__attribute__\(\(section\(\".data.$RAM2\"\)\)\)
+    )
+  target_include_directories(${BOARD_TARGET} PUBLIC
+    ${SDK_DIR}/inc
+    )
+
+  update_board(${BOARD_TARGET})
+
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--script=${LD_FILE_GNU}"
+      # nanolib
+      --specs=nosys.specs
+      --specs=nano.specs
+      )
+  elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+    target_link_options(${BOARD_TARGET} PUBLIC
+      "LINKER:--config=${LD_FILE_IAR}"
+      )
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c
+    ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c
+    ${TOP}/src/portable/ohci/ohci.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_jlink(${TARGET})
+  #family_flash_nxplink(${TARGET})
+endfunction()
diff --git a/hw/bsp/ea4088qs/board.mk b/hw/bsp/lpc40/family.mk
index e1e14b717..c11325890 100644
--- a/hw/bsp/ea4088qs/board.mk
+++ b/hw/bsp/lpc40/family.mk
@@ -1,47 +1,33 @@
 DEPS_SUBMODULES += hw/mcu/nxp/lpcopen
 
+MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx
+include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
+
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib \
   -DCORE_M4 \
   -D__USE_LPCOPEN \
-  -DCFG_TUD_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
-  -DCFG_TUH_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
+  -DCFG_TUSB_MEM_SECTION='__attribute__((section(".data.$$RAM2")))' \
   -DCFG_TUSB_MCU=OPT_MCU_LPC40XX
 
 # mcu driver cause following warnings
 CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=cast-qual
 
-MCU_DIR = hw/mcu/nxp/lpcopen/lpc40xx/lpc_chip_40xx
-
 # All source paths should be relative to the top level.
-LD_FILE = hw/bsp/$(BOARD)/lpc4088.ld
-
 SRC_C += \
 	src/portable/nxp/lpc17_40/dcd_lpc17_40.c \
 	$(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \
 	$(MCU_DIR)/src/chip_17xx_40xx.c \
 	$(MCU_DIR)/src/clock_17xx_40xx.c \
+	$(MCU_DIR)/src/fpu_init.c \
 	$(MCU_DIR)/src/gpio_17xx_40xx.c \
 	$(MCU_DIR)/src/iocon_17xx_40xx.c \
 	$(MCU_DIR)/src/sysctl_17xx_40xx.c \
 	$(MCU_DIR)/src/sysinit_17xx_40xx.c \
 	$(MCU_DIR)/src/uart_17xx_40xx.c \
-	$(MCU_DIR)/src/fpu_init.c
 
 INC += \
-	$(TOP)/$(MCU_DIR)/inc
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
-
-# For flash-jlink target
-JLINK_DEVICE = LPC4088
-
-# flash using jlink
-flash: flash-jlink
+	$(TOP)/$(MCU_DIR)/inc \
+	$(TOP)/$(BOARD_PATH)
diff --git a/hw/bsp/lpc51/family.mk b/hw/bsp/lpc51/family.mk
index bfca2f6b1..df5a9958e 100644
--- a/hw/bsp/lpc51/family.mk
+++ b/hw/bsp/lpc51/family.mk
@@ -3,12 +3,10 @@ DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
 
 MCU_DIR = $(SDK_DIR)/devices/$(MCU)
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
   -DCFG_TUSB_MCU=OPT_MCU_LPC51UXX \
   -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
 
@@ -40,6 +38,3 @@ INC += \
 SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S
 
 LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower.a
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
diff --git a/hw/bsp/lpc54/family.mk b/hw/bsp/lpc54/family.mk
index f52b9b5eb..7d8bb86cd 100644
--- a/hw/bsp/lpc54/family.mk
+++ b/hw/bsp/lpc54/family.mk
@@ -2,14 +2,10 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk
 DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -DCFG_TUSB_MCU=OPT_MCU_LPC54XXX \
   -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))'
 
@@ -49,6 +45,3 @@ INC += \
 	$(TOP)/$(SDK_DIR)/drivers/lpc_gpio
 
 SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake
index 9f6b1f63d..dfd08a732 100644
--- a/hw/bsp/lpc55/family.cmake
+++ b/hw/bsp/lpc55/family.cmake
@@ -87,8 +87,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -103,6 +103,12 @@ function(family_configure_example TARGET)
     ${TOP}/lib/sct_neopixel/sct_neopixel.c
     )
 
+  # https://github.com/gsteiert/sct_neopixel/pull/1
+  if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    set_source_files_properties(${TOP}/lib/sct_neopixel/sct_neopixel.c PROPERTIES
+      COMPILE_FLAGS "-Wno-unused-parameter")
+  endif ()
+
   target_include_directories(${TARGET} PUBLIC
     # family, hw, board
     ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
@@ -111,7 +117,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX)
+  family_add_tinyusb(${TARGET} OPT_MCU_LPC55XX ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
     )
@@ -125,16 +131,3 @@ function(family_configure_example TARGET)
   #family_flash_nxplink(${TARGET})
   #family_flash_pyocd(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/lpc55/family.mk b/hw/bsp/lpc55/family.mk
index f9dabcfa3..a87fa5acf 100644
--- a/hw/bsp/lpc55/family.mk
+++ b/hw/bsp/lpc55/family.mk
@@ -3,17 +3,13 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk
 DEPS_SUBMODULES += lib/CMSIS_5 lib/sct_neopixel $(SDK_DIR)
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m33
 
 # Default to Highspeed PORT1
 PORT ?= 1
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m33 \
-  -mfloat-abi=hard \
-  -mfpu=fpv5-sp-d16 \
   -DCFG_TUSB_MCU=OPT_MCU_LPC55XX \
   -DCFG_TUSB_MEM_ALIGN='__attribute__((aligned(64)))' \
   -DBOARD_TUD_RHPORT=$(PORT)
@@ -63,6 +59,3 @@ INC += \
 SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_CORE).S
 
 LIBS += $(TOP)/$(MCU_DIR)/gcc/libpower_hardabi.a
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure
diff --git a/hw/bsp/mcx/debug.jlinkscript b/hw/bsp/mcx/debug.jlinkscript
new file mode 100644
index 000000000..fd8bcffef
--- /dev/null
+++ b/hw/bsp/mcx/debug.jlinkscript
@@ -0,0 +1,5 @@
+int SetupTarget(void) {
+  JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x40000");
+
+  return 0;
+}
diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake
index 83f44222b..b3a4a846e 100644
--- a/hw/bsp/mcx/family.cmake
+++ b/hw/bsp/mcx/family.cmake
@@ -16,13 +16,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS MCXN9 CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
-
 
 #------------------------------------
 # BOARD_TARGET
@@ -79,8 +72,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -100,7 +93,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_MCXN9)
+  family_add_tinyusb(${TARGET} OPT_MCU_MCXN9 ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS
     ${TOP}/src/portable/chipidea/$<IF:${PORT},ci_hs/dcd_ci_hs.c,ci_fs/dcd_ci_fs.c>
@@ -115,16 +108,3 @@ function(family_configure_example TARGET)
   #family_flash_nxplink(${TARGET})
   #family_flash_pyocd(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk
index 2722c2038..e384aa8eb 100644
--- a/hw/bsp/mcx/family.mk
+++ b/hw/bsp/mcx/family.mk
@@ -4,9 +4,7 @@ SDK_DIR = hw/mcu/nxp/mcux-sdk
 DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5
 
 include $(TOP)/$(BOARD_PATH)/board.mk
-
 CPU_CORE ?= cortex-m33
-include $(TOP)/tools/make/cpu/$(CPU_CORE).mk
 
 # Default to Highspeed PORT1
 PORT ?= 1
diff --git a/hw/bsp/mm32/family.mk b/hw/bsp/mm32/family.mk
index 81af0d166..d5b6e315a 100644
--- a/hw/bsp/mm32/family.mk
+++ b/hw/bsp/mm32/family.mk
@@ -3,13 +3,10 @@ SDK_DIR = hw/mcu/mindmotion/mm32sdk
 DEPS_SUBMODULES += lib/CMSIS_5 $(SDK_DIR)
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m3
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m3 \
-  -mfloat-abi=soft \
   -nostdlib -nostartfiles \
   -DCFG_TUSB_MCU=OPT_MCU_MM32F327X
 
@@ -29,8 +26,5 @@ INC += \
 	$(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/Include \
 	$(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3
-
 # flash target using on-board
 flash: flash-jlink
diff --git a/hw/bsp/msp432e4/family.mk b/hw/bsp/msp432e4/family.mk
index 2383bc604..b5ade6a52 100644
--- a/hw/bsp/msp432e4/family.mk
+++ b/hw/bsp/msp432e4/family.mk
@@ -1,13 +1,11 @@
 DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/ti
 
+#include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
+
 CFLAGS += \
 	-flto \
-	-mthumb \
 	-mslow-flash-data \
-	-mabi=aapcs \
-	-mcpu=cortex-m4 \
-	-mfloat-abi=hard \
-	-mfpu=fpv4-sp-d16 \
 	-D__MSP432E401Y__ \
 	-DCFG_TUSB_MCU=OPT_MCU_MSP432E4
 
@@ -33,9 +31,6 @@ INC += \
 
 SRC_S += $(MCU_DIR)/Source/startup_msp432e411y_gcc.S
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
-
 # For flash-jlink target
 JLINK_DEVICE = MSP432E401Y
 JLINK_IF     = SWD
diff --git a/hw/bsp/nrf/boards/pca10056/board.h b/hw/bsp/nrf/boards/pca10056/board.h
index 50d3067b3..f4368f830 100644
--- a/hw/bsp/nrf/boards/pca10056/board.h
+++ b/hw/bsp/nrf/boards/pca10056/board.h
@@ -36,7 +36,7 @@
 #define LED_STATE_ON          0
 
 // Button
-#define BUTTON_PIN            11
+#define BUTTON_PIN            25 // button 4
 #define BUTTON_STATE_ACTIVE   0
 
 // UART
diff --git a/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug b/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug
new file mode 100644
index 000000000..fa7ab9e23
--- /dev/null
+++ b/hw/bsp/nrf/boards/pca10056/ozone/nrf52840.jdebug
@@ -0,0 +1,238 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  // Dialog-generated settings
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M4F.svd");
+  Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd");
+
+  Project.SetDevice ("nRF52840_xxAA");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("8 MHz");
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  // User settings
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-pca10056/cdc_msc.elf");
+}
+
+/*********************************************************************
+*
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging a RAM program on a Cortex-M target device
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  Exec.Reset();
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//
+//    Util.Log("Resetting Program.");
+//
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}
diff --git a/hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug b/hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug
new file mode 100644
index 000000000..4ad0376a4
--- /dev/null
+++ b/hw/bsp/nrf/boards/pca10095/ozone/nrf5340.jdebug
@@ -0,0 +1,335 @@
+/*********************************************************************
+*                 (c) SEGGER Microcontroller GmbH                    *
+*                      The Embedded Experts                          *
+*                         www.segger.com                             *
+**********************************************************************
+
+File          :
+Created       : 30 Jun 2021 13:37
+Ozone Version : V3.24a
+*/
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  // Dialog-generated settings
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M33F.svd");
+  Project.AddSvdFile ("./nrf5340_application.svd");
+  Project.SetDevice ("nRF5340_xxAA_APP");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("16 MHz");
+
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  // User settings
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-pca10095/cdc_msc.elf");
+}
+
+/*********************************************************************
+*
+*       OnStartupComplete
+*
+* Function description
+*   Called when program execution has reached/passed
+*   the startup completion point. Optional.
+*
+**********************************************************************
+*/
+//void OnStartupComplete (void) {
+//}
+
+/*********************************************************************
+*
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging an application in RAM on a Cortex-M target device.
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//  //
+//  // Set up initial stack pointer
+//  //
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//  }
+//  //
+//  // Set up entry point PC
+//  //
+//  PC = Elf.GetEntryPointPC();
+//
+//  if (PC != 0xFFFFFFFF) {
+//    Target.SetReg("PC", PC);
+//  } else if (VectorTableAddr != 0xFFFFFFFF) {
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  } else {
+//    Util.Error("Project file error: failed to set entry point PC", 1);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*   The default implementation initializes SP and PC to reset values.
+**
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  _SetupTarget();
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*   The default implementation initializes SP and PC to reset values.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  _SetupTarget();
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetResume
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetResume (void) {
+//}
+
+/*********************************************************************
+*
+*       OnSnapshotLoad
+*
+* Function description
+*   Called upon loading a snapshot. Optional.
+*
+* Additional information
+*   This function is used to restore the target state in cases
+*   where values cannot simply be written to the target.
+*   Typical use: GPIO clock needs to be enabled, before
+*   GPIO is configured.
+*
+**********************************************************************
+*/
+//void OnSnapshotLoad (void) {
+//}
+
+/*********************************************************************
+*
+*       OnSnapshotSave
+*
+* Function description
+*   Called upon saving a snapshot. Optional.
+*
+* Additional information
+*   This function is usually used to save values of the target
+*   state which can either not be trivially read,
+*   or need to be restored in a specific way or order.
+*   Typically use: Memory Mapped Registers,
+*   such as PLL and GPIO configuration.
+*
+**********************************************************************
+*/
+//void OnSnapshotSave (void) {
+//}
+
+/*********************************************************************
+*
+*       OnError
+*
+* Function description
+*   Called when an error occurred. Optional.
+*
+**********************************************************************
+*/
+//void OnError (void) {
+//}
+
+/*********************************************************************
+*
+*       _SetupTarget
+*
+* Function description
+*   Setup the target.
+*   Called by AfterTargetReset() and AfterTargetDownload().
+*
+*   Auto-generated function. May be overridden by Ozone.
+*
+**********************************************************************
+*/
+void _SetupTarget(void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+  //
+  // Set up initial stack pointer
+  //
+  SP = Target.ReadU32(VectorTableAddr);
+  if (SP != 0xFFFFFFFF) {
+    Target.SetReg("SP", SP);
+  }
+  //
+  // Set up entry point PC
+  //
+  PC = Elf.GetEntryPointPC();
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else {
+    Util.Error("Project script error: failed to set up entry point PC", 1);
+  }
+}
diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake
index 88670b50b..2b13249f4 100644
--- a/hw/bsp/nrf/family.cmake
+++ b/hw/bsp/nrf/family.cmake
@@ -23,12 +23,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS NRF5X CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
 
 #------------------------------------
 # BOARD_TARGET
@@ -46,6 +40,12 @@ function(add_board_target BOARD_TARGET)
     target_compile_definitions(${BOARD_TARGET} PUBLIC
       CONFIG_GPIO_AS_PINRESET
       )
+
+    if (TRACE_ETM STREQUAL "1")
+      # ENABLE_TRACE will cause system_nrf5x.c to set up ETM trace
+      target_compile_definitions(${BOARD_TARGET} PUBLIC ENABLE_TRACE)
+    endif ()
+
     target_include_directories(${BOARD_TARGET} PUBLIC
       ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
       ${NRFX_DIR}
@@ -91,8 +91,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -112,30 +112,15 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_NRF5X)
+  family_add_tinyusb(${TARGET} OPT_MCU_NRF5X ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/nordic/nrf5x/dcd_nrf5x.c
     )
   target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
 
-
-
   # Link dependencies
   target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
 
   # Flashing
   family_flash_jlink(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/nrf/family.mk b/hw/bsp/nrf/family.mk
index 6d067e1c2..cdcfe39bd 100644
--- a/hw/bsp/nrf/family.mk
+++ b/hw/bsp/nrf/family.mk
@@ -5,7 +5,6 @@ include $(TOP)/$(BOARD_PATH)/board.mk
 
 # nRF52 is cortex-m4, nRF53 is cortex-m33
 CPU_CORE ?= cortex-m4
-include $(TOP)/tools/make/cpu/$(CPU_CORE).mk
 
 CFLAGS += \
   -flto \
diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..8c39a2fb8
--- /dev/null
+++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,180 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wundef"
+
+// extra push due to https://github.com/renesas/fsp/pull/278
+#pragma GCC diagnostic push
+#endif
+
+#include "bsp_api.h"
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       __NVIC_PRIO_BITS
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.cmake b/hw/bsp/ra/boards/ra4m1_ek/board.cmake
new file mode 100644
index 000000000..4188d3188
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra4m1)
+
+set(JLINK_DEVICE R7FA4M1AB)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h
new file mode 100644
index 000000000..ba3698f3d
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m1_ek/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_06
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_01_PIN_05
+#define BUTTON_STATE_ACTIVE   0
+
+const ioport_pin_cfg_t board_pin_cfg[] = {
+    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.mk b/hw/bsp/ra/boards/ra4m1_ek/board.mk
index 6a661c0b8..f257c0000 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/board.mk
+++ b/hw/bsp/ra/boards/ra4m1_ek/board.mk
@@ -1,17 +1,7 @@
-CFLAGS += \
-	-mcpu=cortex-m4 \
-	-mfloat-abi=hard \
-	-mfpu=fpv4-sp-d16 \
-	-DCFG_TUSB_MCU=OPT_MCU_RAXXX
-
-FSP_MCU_DIR = hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/ra4m1
-FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m1_ek
-
-# All source paths should be relative to the top level.
-LD_FILE = $(BOARD_PATH)/ra4m1_ek.ld
+CPU_CORE = cortex-m4
+MCU_VARIANT = ra4m1
 
 # For flash-jlink target
 JLINK_DEVICE = R7FA4M1AB
-JLINK_IF     = SWD
 
 flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
index b38a79b40..700d9b29f 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -2,7 +2,6 @@
 #ifndef BSP_CFG_H_
 #define BSP_CFG_H_
 
-#include "board.h"
 #include "bsp_clock_cfg.h"
 #include "bsp_mcu_family_cfg.h"
 
@@ -32,4 +31,13 @@
 #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(1)
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
 
+#define BSP_FEATURE_BSP_HAS_SCISPI_CLOCK 0
+
+#define BSP_FEATURE_TFU_SUPPORTED 0
+#define BSP_TZ_SECURE_BUILD    (0)
+#define BSP_TZ_NONSECURE_BUILD (0)
+
+// for SystemInit()
+void bsp_init(void * p_args);
+
 #endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
index 444d32e56..444d32e56 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
index d810dabb2..d810dabb2 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
index 3bde2db0d..3bde2db0d 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h
deleted file mode 100644
index 37739c12a..000000000
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */
-#define TU_IRQn 0
-#define USBFS_RESUME_IRQn 1
-#define USBFS_FIFO_0_IRQn 2
-#define USBFS_FIFO_1_IRQn 3
diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.cmake b/hw/bsp/ra/boards/ra4m3_ek/board.cmake
new file mode 100644
index 000000000..dfd5fc95a
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra4m3)
+
+set(JLINK_DEVICE R7FA4M3AF)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.h b/hw/bsp/ra/boards/ra4m3_ek/board.h
new file mode 100644
index 000000000..c2f150b33
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1 (BSP_IO_PORT_04_PIN_15)
+#define LED_STATE_ON          1
+
+#define SW1  (BSP_IO_PORT_00_PIN_05)
+#define BUTTON_STATE_ACTIVE   0
+
+const ioport_pin_cfg_t board_pin_cfg[] = {
+  {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+  {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+  {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+  {.pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+  {.pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.mk b/hw/bsp/ra/boards/ra4m3_ek/board.mk
index d668db0ea..5987269b5 100644
--- a/hw/bsp/ra/boards/ra4m3_ek/board.mk
+++ b/hw/bsp/ra/boards/ra4m3_ek/board.mk
@@ -1,17 +1,7 @@
-CFLAGS += \
-	-mcpu=cortex-m33 \
-	-mfloat-abi=hard \
-	-mfpu=fpv5-sp-d16 \
-	-DCFG_TUSB_MCU=OPT_MCU_RAXXX
-
-FSP_MCU_DIR = hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/ra4m3
-FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m3_ek
-
-# All source paths should be relative to the top level.
-LD_FILE = $(BOARD_PATH)/ra4m3_ek.ld
+CPU_CORE = cortex-m33
+MCU_VARIANT = ra4m3
 
 # For flash-jlink target
 JLINK_DEVICE = R7FA4M3AF
-JLINK_IF     = SWD
 
 flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h
index a84d81e8d..a9cb8210b 100755..100644
--- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -2,7 +2,6 @@
 #ifndef BSP_CFG_H_
 #define BSP_CFG_H_
 
-#include "board.h"
 #include "bsp_clock_cfg.h"
 #include "bsp_mcu_family_cfg.h"
 
@@ -32,4 +31,7 @@
 #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(1)
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
 
+// for SystemInit()
+void bsp_init(void * p_args);
+
 #endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
index 4ecda1c66..4ecda1c66 100644
--- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_mcu_family_cfg.h
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/r_ioport_cfg.h
deleted file mode 100755
index cb7c07932..000000000
--- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/r_ioport_cfg.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* generated configuration header file - do not edit */
-#ifndef R_IOPORT_CFG_H_
-#define R_IOPORT_CFG_H_
-
-#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE)
-
-#endif /* R_IOPORT_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/vector_data.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/vector_data.h
deleted file mode 100644
index 37739c12a..000000000
--- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/vector_data.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */
-#define TU_IRQn 0
-#define USBFS_RESUME_IRQn 1
-#define USBFS_FIFO_0_IRQn 2
-#define USBFS_FIFO_1_IRQn 3
diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c b/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c
deleted file mode 100644
index 327ef71d5..000000000
--- a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2022, Rafael Silva
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include <stdio.h>
-
-#include "bsp/board.h"
-#include "bsp_api.h"
-#include "r_ioport.h"
-#include "r_ioport_api.h"
-#include "renesas.h"
-
-/* Key code for writing PRCR register. */
-#define BSP_PRV_PRCR_KEY	 (0xA500U)
-#define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U)
-#define BSP_PRV_PRCR_LOCK	 ((BSP_PRV_PRCR_KEY) | 0x0U)
-
-#define SW1  (BSP_IO_PORT_00_PIN_05)
-#define SW2  (BSP_IO_PORT_00_PIN_06)
-#define LED1 (BSP_IO_PORT_04_PIN_15)
-#define LED3 (BSP_IO_PORT_04_PIN_00)
-#define LED2 (BSP_IO_PORT_04_PIN_04)
-
-/* ISR prototypes */
-void usbfs_interrupt_handler(void);
-void usbfs_resume_handler(void);
-void usbfs_d0fifo_handler(void);
-void usbfs_d1fifo_handler(void);
-
-BSP_DONT_REMOVE const
-  fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = {
-    [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */
-    [1] = usbfs_resume_handler,    /* USBFS RESUME (USBFS resume interrupt) */
-    [2] = usbfs_d0fifo_handler,    /* USBFS FIFO 0 (DMA transfer request 0) */
-    [3] = usbfs_d1fifo_handler,    /* USBFS FIFO 1 (DMA transfer request 1) */
-};
-const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = {
-  [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT),    /* USBFS INT (USBFS interrupt) */
-  [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */
-  [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */
-  [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1)  /* USBFS FIFO 1 (DMA transfer request 1) */
-};
-
-const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = {
-  {.pin = BSP_IO_PORT_04_PIN_07,
-   .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS)},
-  {.pin = BSP_IO_PORT_05_PIN_00,
-   .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS)},
-  {.pin = BSP_IO_PORT_05_PIN_01,
-   .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS)},
-  {.pin = LED1, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW)},
-  {.pin = LED2, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW)},
-  {.pin = LED3, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW)},
-  {.pin = SW1, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT)},
-  {.pin = SW2, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT)}};
-
-const ioport_cfg_t g_bsp_pin_cfg = {
-  .number_of_pins = sizeof(g_bsp_pin_cfg_data) / sizeof(ioport_pin_cfg_t),
-  .p_pin_cfg_data = &g_bsp_pin_cfg_data[0],
-};
-ioport_instance_ctrl_t g_ioport_ctrl;
-const ioport_instance_t g_ioport = {.p_api = &g_ioport_on_ioport, .p_ctrl = &g_ioport_ctrl, .p_cfg = &g_bsp_pin_cfg};
-
-//--------------------------------------------------------------------+
-// Forward USB interrupt events to TinyUSB IRQ Handler
-//--------------------------------------------------------------------+
-void usbfs_interrupt_handler(void)
-{
-  IRQn_Type irq = R_FSP_CurrentIrqGet();
-  R_BSP_IrqStatusClear(irq);
-
-#if CFG_TUH_ENABLED
-  tuh_int_handler(0);
-#endif
-
-#if CFG_TUD_ENABLED
-  tud_int_handler(0);
-#endif
-}
-void usbfs_resume_handler(void)
-{
-  IRQn_Type irq = R_FSP_CurrentIrqGet();
-  R_BSP_IrqStatusClear(irq);
-
-#if CFG_TUH_ENABLED
-  tuh_int_handler(0);
-#endif
-
-#if CFG_TUD_ENABLED
-  tud_int_handler(0);
-#endif
-}
-
-void usbfs_d0fifo_handler(void)
-{
-  IRQn_Type irq = R_FSP_CurrentIrqGet();
-  R_BSP_IrqStatusClear(irq);
-
-#if CFG_TUH_ENABLED
-  tuh_int_handler(0);
-#endif
-
-#if CFG_TUD_ENABLED
-  tud_int_handler(0);
-#endif
-}
-
-void usbfs_d1fifo_handler(void)
-{
-  IRQn_Type irq = R_FSP_CurrentIrqGet();
-  R_BSP_IrqStatusClear(irq);
-
-#if CFG_TUH_ENABLED
-  tuh_int_handler(0);
-#endif
-
-#if CFG_TUD_ENABLED
-  tud_int_handler(0);
-#endif
-}
-
-void board_init(void)
-{
-  /* Configure pins. */
-  R_IOPORT_Open(&g_ioport_ctrl, &g_bsp_pin_cfg);
-
-  /* Enable USB_BASE */
-  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK;
-  R_MSTP->MSTPCRB &= ~(1U << 11U);
-  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK;
-
-#if CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-  NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-  NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-  NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-#endif
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-  /* Init systick */
-  SysTick_Config(SystemCoreClock / 1000);
-#endif
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  R_IOPORT_PinWrite(&g_ioport_ctrl, LED1, state);
-  R_IOPORT_PinWrite(&g_ioport_ctrl, LED2, state);
-  R_IOPORT_PinWrite(&g_ioport_ctrl, LED3, state);
-}
-
-uint32_t board_button_read(void)
-{
-  bsp_io_level_t lvl;
-  R_IOPORT_PinRead(&g_ioport_ctrl, SW1, &lvl);
-  return lvl;
-}
-
-int board_uart_read(uint8_t *buf, int len)
-{
-  (void) buf;
-  (void) len;
-  return 0;
-}
-
-int board_uart_write(void const *buf, int len)
-{
-  (void) buf;
-  (void) len;
-  return 0;
-}
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#else
-#endif
-
-int close(int fd)
-{
-  (void) fd;
-  return -1;
-}
-int fstat(int fd, void *pstat)
-{
-  (void) fd;
-  (void) pstat;
-  return 0;
-}
-off_t lseek(int fd, off_t pos, int whence)
-{
-  (void) fd;
-  (void) pos;
-  (void) whence;
-  return 0;
-}
-int isatty(int fd)
-{
-  (void) fd;
-  return 1;
-}
diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld b/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld
deleted file mode 100644
index 5bc335cb4..000000000
--- a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld
+++ /dev/null
@@ -1,575 +0,0 @@
-/* generated memory regions file - do not edit */
-RAM_START = 0x20000000;
-RAM_LENGTH = 0x20000;
-FLASH_START = 0x00000000;
-FLASH_LENGTH = 0x100000;
-DATA_FLASH_START = 0x08000000;
-DATA_FLASH_LENGTH = 0x2000;
-OPTION_SETTING_START = 0x0100A100;
-OPTION_SETTING_LENGTH = 0x100;
-OPTION_SETTING_S_START = 0x0100A200;
-OPTION_SETTING_S_LENGTH = 0x100;
-ID_CODE_START = 0x00000000;
-ID_CODE_LENGTH = 0x0;
-SDRAM_START = 0x90000000;
-SDRAM_LENGTH = 0x0;
-QSPI_FLASH_START = 0x60000000;
-QSPI_FLASH_LENGTH = 0x4000000;
-OSPI_DEVICE_0_START = 0x68000000;
-OSPI_DEVICE_0_LENGTH = 0x0;
-OSPI_DEVICE_1_START = 0x70000000;
-OSPI_DEVICE_1_LENGTH = 0x0;
-
-/*
-    Linker File for Renesas FSP
-*/
-
-QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH);
-OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH);
-OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH);
-
-/* This is a non-secure project if the OPTION_SETTING region is non-zero and it does not start at the base address for
- * secure option settings (meaning the secure option settings were already allocated in the secure project). */
-__TZ_NS_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) != ORIGIN(OPTION_SETTING));
-
-/* This is a secure project if the option setting base address matches the option setting base address for secure
- * option settings. This is also set for flat projects because the CPU runs in secure mode for flat projects.
- * This is not defined for projects that do not support TrustZone. */
-__TZ_S_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) == ORIGIN(OPTION_SETTING));
-
-/* If a flat (secure) project has defined RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */
-__RESERVE_NS_RAM = __TZ_S_PROJECT && DEFINED(RAM_NS_BUFFER_LENGTH);
-
-RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0;
-RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0;
-RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH;
-RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH;
-
-/* Define memory regions. */
-MEMORY
-{
-  FLASH (rx)      : ORIGIN = FLASH_START, LENGTH = FLASH_LENGTH
-  RAM (rwx)       : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
-  DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH
-  QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH
-  OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
-  OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
-  SDRAM (rwx)     : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH
-  OPTION_SETTING (r): ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH
-  OPTION_SETTING_S (r): ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH
-  ID_CODE (rx)    : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH
-}
-
-OPTION_SETTING_START_NS = 0x0100A180;
-OPTION_SETTING_START_S = 0x0100A100;
-
-/* Library configurations */
-GROUP(libgcc.a libc.a libm.a libnosys.a)
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- *   Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- *   __exidx_start
- *   __exidx_end
- *   __copy_table_start__
- *   __copy_table_end__
- *   __zero_table_start__
- *   __zero_table_end__
- *   __etext
- *   __data_start__
- *   __preinit_array_start
- *   __preinit_array_end
- *   __init_array_start
- *   __init_array_end
- *   __fini_array_start
- *   __fini_array_end
- *   __data_end__
- *   __bss_start__
- *   __bss_end__
- *   __HeapLimit
- *   __StackLimit
- *   __StackTop
- *   __stack
- *   __Vectors_End
- *   __Vectors_Size
- *   __qspi_flash_start__
- *   __qspi_flash_end__
- *   __qspi_flash_code_size__
- *   __qspi_region_max_size__
- *   __qspi_region_start_address__
- *   __qspi_region_end_address__
- *   __ospi_device_0_start__
- *   __ospi_device_0_end__
- *   __ospi_device_0_code_size__
- *   __ospi_device_0_region_max_size__
- *   __ospi_device_0_region_start_address__
- *   __ospi_device_0_region_end_address__
- *   __ospi_device_1_start__
- *   __ospi_device_1_end__
- *   __ospi_device_1_code_size__
- *   __ospi_device_1_region_max_size__
- *   __ospi_device_1_region_start_address__
- *   __ospi_device_1_region_end_address__
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
-    .text :
-    {
-        __tz_FLASH_S = ABSOLUTE(FLASH_START);
-        __ROM_Start = .;
-
-        /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much
-         * space because ROM registers are at address 0x400 and there is very little space
-         * in between. */
-        KEEP(*(.fixed_vectors*))
-        KEEP(*(.application_vectors*))
-        __Vectors_End = .;
-
-        /* ROM Registers start at address 0x00000400 */
-        . = __ROM_Start + 0x400;
-        KEEP(*(.rom_registers*))
-
-        /* Reserving 0x100 bytes of space for ROM registers. */
-        . = __ROM_Start + 0x500;
-
-        *(.text*)
-
-        KEEP(*(.version))
-        KEEP(*(.init))
-        KEEP(*(.fini))
-
-        /* .ctors */
-        *crtbegin.o(.ctors)
-        *crtbegin?.o(.ctors)
-        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
-        *(SORT(.ctors.*))
-        *(.ctors)
-
-        /* .dtors */
-        *crtbegin.o(.dtors)
-        *crtbegin?.o(.dtors)
-        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
-        *(SORT(.dtors.*))
-        *(.dtors)
-
-        *(.rodata*)
-        __usb_dev_descriptor_start_fs = .;
-        KEEP(*(.usb_device_desc_fs*))
-        __usb_cfg_descriptor_start_fs = .;
-        KEEP(*(.usb_config_desc_fs*))
-        __usb_interface_descriptor_start_fs = .;
-        KEEP(*(.usb_interface_desc_fs*))
-        __usb_descriptor_end_fs = .;
-        __usb_dev_descriptor_start_hs = .;
-        KEEP(*(.usb_device_desc_hs*))
-        __usb_cfg_descriptor_start_hs = .;
-        KEEP(*(.usb_config_desc_hs*))
-        __usb_interface_descriptor_start_hs = .;
-        KEEP(*(.usb_interface_desc_hs*))
-        __usb_descriptor_end_hs = .;
-
-        KEEP(*(.eh_frame*))
-
-        __ROM_End = .;
-    } > FLASH = 0xFF
-
-    __Vectors_Size = __Vectors_End - __Vectors;
-
-    .ARM.extab :
-    {
-        *(.ARM.extab* .gnu.linkonce.armextab.*)
-    } > FLASH
-
-    __exidx_start = .;
-    .ARM.exidx :
-    {
-        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
-    } > FLASH
-    __exidx_end = .;
-
-    /* To copy multiple ROM to RAM sections,
-     * uncomment .copy.table section and,
-     * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
-    /*
-    .copy.table :
-    {
-        . = ALIGN(4);
-        __copy_table_start__ = .;
-        LONG (__etext)
-        LONG (__data_start__)
-        LONG (__data_end__ - __data_start__)
-        LONG (__etext2)
-        LONG (__data2_start__)
-        LONG (__data2_end__ - __data2_start__)
-        __copy_table_end__ = .;
-    } > FLASH
-    */
-
-    /* To clear multiple BSS sections,
-     * uncomment .zero.table section and,
-     * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
-    /*
-    .zero.table :
-    {
-        . = ALIGN(4);
-        __zero_table_start__ = .;
-        LONG (__bss_start__)
-        LONG (__bss_end__ - __bss_start__)
-        LONG (__bss2_start__)
-        LONG (__bss2_end__ - __bss2_start__)
-        __zero_table_end__ = .;
-    } > FLASH
-    */
-
-    __etext = .;
-
-    __tz_RAM_S = ORIGIN(RAM);
-
-    /* If DTC is used, put the DTC vector table at the start of SRAM.
-       This avoids memory holes due to 1K alignment required by it. */
-    .fsp_dtc_vector_table (NOLOAD) :
-    {
-        . = ORIGIN(RAM);
-        *(.fsp_dtc_vector_table)
-    } > RAM
-
-    /* Initialized data section. */
-    .data :
-    {
-        __data_start__ = .;
-        . = ALIGN(4);
-
-        __Code_In_RAM_Start = .;
-
-        KEEP(*(.code_in_ram*))
-        __Code_In_RAM_End = .;
-
-        *(vtable)
-        /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */
-        *(.data.*)
-        *(.data)
-
-        . = ALIGN(4);
-        /* preinit data */
-        PROVIDE_HIDDEN (__preinit_array_start = .);
-        KEEP(*(.preinit_array))
-        PROVIDE_HIDDEN (__preinit_array_end = .);
-
-        . = ALIGN(4);
-        /* init data */
-        PROVIDE_HIDDEN (__init_array_start = .);
-        KEEP(*(SORT(.init_array.*)))
-        KEEP(*(.init_array))
-        PROVIDE_HIDDEN (__init_array_end = .);
-
-
-        . = ALIGN(4);
-        /* finit data */
-        PROVIDE_HIDDEN (__fini_array_start = .);
-        KEEP(*(SORT(.fini_array.*)))
-        KEEP(*(.fini_array))
-        PROVIDE_HIDDEN (__fini_array_end = .);
-
-        KEEP(*(.jcr*))
-
-        . = ALIGN(4);
-
-        /* All data end */
-        __data_end__ = .;
-
-    } > RAM AT > FLASH
-
-
-    /* TrustZone Secure Gateway Stubs Section. */
-    .gnu.sgstubs : ALIGN (1024)
-    {
-        . = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024);
-        __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024);
-        _start_sg = .;
-        *(.gnu.sgstubs*)
-        . = ALIGN(32);
-        _end_sg = .;
-    } > FLASH
-
-    __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(32768);
-
-    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
-    __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH);
-
-    /* QSPI_FLASH section to be downloaded via debugger */
-    .qspi_flash :
-    {
-        __qspi_flash_start__ = .;
-        KEEP(*(.qspi_flash*))
-        KEEP(*(.code_in_qspi*))
-        __qspi_flash_end__ = .;
-    } > QSPI_FLASH
-    __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__;
-
-    /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */
-    __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__);
-    .qspi_non_retentive : AT (__qspi_flash_code_addr__)
-    {
-        __qspi_non_retentive_start__ = .;
-        KEEP(*(.qspi_non_retentive*))
-        __qspi_non_retentive_end__ = .;
-    } > QSPI_FLASH
-    __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__;
-
-    __qspi_region_max_size__ = 0x4000000;   /* Must be the same as defined in MEMORY above */
-    __qspi_region_start_address__ = __qspi_flash_start__;
-    __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__;
-
-    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
-    __tz_QSPI_FLASH_N = __qspi_non_retentive_end__;
-
-    /* Note: There are no secure/non-secure boundaries for QSPI.  These symbols are provided for the RA configuration tool. */
-    __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0);
-
-    /* OSPI_DEVICE_0 section to be downloaded via debugger */
-    .OSPI_DEVICE_0 :
-    {
-        __ospi_device_0_start__ = .;
-        KEEP(*(.ospi_device_0*))
-        KEEP(*(.code_in_ospi_device_0*))
-        __ospi_device_0_end__ = .;
-    } > OSPI_DEVICE_0
-    __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__;
-
-    /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
-    __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__);
-    .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__)
-    {
-        __ospi_device_0_non_retentive_start__ = .;
-        KEEP(*(.ospi_device_0_non_retentive*))
-        __ospi_device_0_non_retentive_end__ = .;
-    } > OSPI_DEVICE_0
-    __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__;
-
-    __ospi_device_0_region_max_size__ = 0x8000000;   /* Must be the same as defined in MEMORY above */
-    __ospi_device_0_region_start_address__ = __ospi_device_0_start__;
-    __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__;
-
-    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
-    __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__;
-
-    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
-    __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1);
-
-    /* OSPI_DEVICE_1 section to be downloaded via debugger */
-    .OSPI_DEVICE_1 :
-    {
-        __ospi_device_1_start__ = .;
-        KEEP(*(.ospi_device_1*))
-        KEEP(*(.code_in_ospi_device_1*))
-        __ospi_device_1_end__ = .;
-    } > OSPI_DEVICE_1
-    __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__;
-
-    /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
-    __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__);
-    .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__)
-    {
-        __ospi_device_1_non_retentive_start__ = .;
-        KEEP(*(.ospi_device_1_non_retentive*))
-        __ospi_device_1_non_retentive_end__ = .;
-    } > OSPI_DEVICE_1
-    __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__;
-
-    __ospi_device_1_region_max_size__ = 0x10000000;   /* Must be the same as defined in MEMORY above */
-    __ospi_device_1_region_start_address__ = __ospi_device_1_start__;
-    __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__;
-
-    /* Note: There are no secure/non-secure boundaries for OSPI.  These symbols are provided for the RA configuration tool. */
-    __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__;
-
-    .noinit (NOLOAD):
-    {
-        . = ALIGN(4);
-        __noinit_start = .;
-        KEEP(*(.noinit*))
-        . = ALIGN(8);
-        /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */
-        KEEP(*(.heap.*))
-        __noinit_end = .;
-    } > RAM
-
-    .bss :
-    {
-        . = ALIGN(4);
-        __bss_start__ = .;
-        *(.bss*)
-        *(COMMON)
-        . = ALIGN(4);
-        __bss_end__ = .;
-    } > RAM
-
-    .heap (NOLOAD):
-    {
-        . = ALIGN(8);
-        __HeapBase = .;
-        /* Place the STD heap here. */
-        KEEP(*(.heap))
-        __HeapLimit = .;
-    } > RAM
-
-    /* Stacks are stored in this section. */
-    .stack_dummy (NOLOAD):
-    {
-        . = ALIGN(8);
-        __StackLimit = .;
-        /* Main stack */
-        KEEP(*(.stack))
-        __StackTop = .;
-        /* Thread stacks */
-        KEEP(*(.stack*))
-        __StackTopAll = .;
-    } > RAM
-
-    PROVIDE(__stack = __StackTopAll);
-
-    /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used
-       at run time for things such as ThreadX memory pool allocations. */
-    __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4);
-
-    /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects.
-     * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary.
-     * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
-    __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024);
-
-    /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects.
-     * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not
-     * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary.
-     * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
-    __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192);
-
-    /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects.
-     * The EDMAC is a non-secure bus master and can only access non-secure RAM. */
-    .ns_buffer (NOLOAD):
-    {
-        /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */
-        . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .;
-
-        KEEP(*(.ns_buffer*))
-    } > RAM
-
-    /* Data flash. */
-    .data_flash :
-    {
-        . = ORIGIN(DATA_FLASH);
-        __tz_DATA_FLASH_S = .;
-        __Data_Flash_Start = .;
-        KEEP(*(.data_flash*))
-        __Data_Flash_End = .;
-
-        __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024);
-    } > DATA_FLASH
-
-    /* Note: There are no secure/non-secure boundaries for SDRAM.  These symbols are provided for the RA configuration tool. */
-    __tz_SDRAM_S = ORIGIN(SDRAM);
-
-    /* SDRAM */
-    .sdram (NOLOAD):
-    {
-        __SDRAM_Start = .;
-        KEEP(*(.sdram*))
-        KEEP(*(.frame*))
-        __SDRAM_End = .;
-    } > SDRAM
-
-    /* Note: There are no secure/non-secure boundaries for SDRAM.  These symbols are provided for the RA configuration tool. */
-    __tz_SDRAM_N = __SDRAM_End;
-
-    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool. */
-    __tz_ID_CODE_S = ORIGIN(ID_CODE);
-
-    .id_code :
-    {
-        __ID_Code_Start = .;
-        KEEP(*(.id_code*))
-        __ID_Code_End = .;
-    } > ID_CODE
-
-    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool. */
-    __tz_ID_CODE_N = __ID_Code_End;
-
-    /* Symbol required for RA Configuration tool. */
-    __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING);
-
-    .option_setting :
-    {
-        __OPTION_SETTING_Start = .;
-        KEEP(*(.option_setting_ofs0))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x10 : __OPTION_SETTING_Start;
-        KEEP(*(.option_setting_dualsel))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x34 : __OPTION_SETTING_Start;
-        KEEP(*(.option_setting_sas))
-        __OPTION_SETTING_End = .;
-    } > OPTION_SETTING = 0xFF
-
-    /* Symbol required for RA Configuration tool. */
-    __tz_OPTION_SETTING_N = OPTION_SETTING_START_NS;
-
-    .option_setting_ns :
-    {
-        __OPTION_SETTING_NS_Start = .;
-        KEEP(*(.option_setting_ofs1))
-        . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start;
-        KEEP(*(.option_setting_banksel))
-        . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start;
-        KEEP(*(.option_setting_bps0))
-        . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start;
-        KEEP(*(.option_setting_bps1))
-        . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start;
-        KEEP(*(.option_setting_bps2))
-        . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start;
-        KEEP(*(.option_setting_pbps0))
-        . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start;
-        KEEP(*(.option_setting_pbps1))
-        . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start;
-        KEEP(*(.option_setting_pbps2))
-        __OPTION_SETTING_NS_End = .;
-    } > OPTION_SETTING = 0xFF
-
-    /* Symbol required for RA Configuration tool. */
-    __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S);
-
-    .option_setting_s :
-    {
-        __OPTION_SETTING_S_Start = .;
-        KEEP(*(.option_setting_ofs1_sec))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_banksel_sec))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_bps_sec0))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_bps_sec1))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_bps_sec2))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_pbps_sec0))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_pbps_sec1))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_pbps_sec2))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_ofs1_sel))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_banksel_sel))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_bps_sel0))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_bps_sel1))
-        . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start;
-        KEEP(*(.option_setting_bps_sel2))
-        __OPTION_SETTING_S_End = .;
-    } > OPTION_SETTING_S = 0xFF
-
-    /* Symbol required for RA Configuration tool. */
-    __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End;
-}
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.cmake b/hw/bsp/ra/boards/ra6m1_ek/board.cmake
new file mode 100644
index 000000000..b2f41a354
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra6m1)
+
+set(JLINK_DEVICE R7FA6M1AD)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h
new file mode 100644
index 000000000..0b7297fd4
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_12
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_04_PIN_15
+#define BUTTON_STATE_ACTIVE   0
+
+const ioport_pin_cfg_t board_pin_cfg[] = {
+    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.mk b/hw/bsp/ra/boards/ra6m1_ek/board.mk
new file mode 100644
index 000000000..f06b693d8
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.mk
@@ -0,0 +1,7 @@
+CPU_CORE = cortex-m4
+MCU_VARIANT = ra6m1
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA6M1AD
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..c2b23b16c
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,77 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (2)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+  #define BSP_CFG_RTOS (1)
+#else
+  #define BSP_CFG_RTOS (0)
+#endif
+#endif
+
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+  #define BSP_CFG_BOOT_IMAGE (1)
+#endif
+
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x400)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#define BSP_FEATURE_BSP_HAS_SCISPI_CLOCK 0
+#define BSP_FEATURE_TFU_SUPPORTED 0
+#define BSP_TZ_SECURE_BUILD    (0)
+#define BSP_TZ_NONSECURE_BUILD (0)
+
+#define BSP_CFG_USE_LOW_VOLTAGE_MODE 0
+
+// for SystemInit()
+void bsp_init(void * p_args);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..bd6a901c3
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (6)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..40bb3a3bf
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA6M1AD3CFP
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (524288)
+#define BSP_RAM_SIZE_BYTES (262144)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (100)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..5fedd754f
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,84 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA6M1 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 1
+  #define BSP_HOCO_HZ                 (18000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ                 (20000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+
+#define BSP_CFG_FLL_ENABLE                 (0)
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF)
+#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/*
+ ID Code
+ Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings.
+ WARNING: This will disable debug access to the part and cannot be reversed by a debug probe.
+ */
+#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED)
+  #define BSP_CFG_ID_CODE_LONG_1 (0x00000000)
+  #define BSP_CFG_ID_CODE_LONG_2 (0x00000000)
+  #define BSP_CFG_ID_CODE_LONG_3 (0x00000000)
+  #define BSP_CFG_ID_CODE_LONG_4 (0x00000000)
+#else
+  /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */
+  #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF)
+  #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF)
+  #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF)
+  #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..1cdfae949
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,23 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_1) /* PLL Div /1 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL_20_0 /* PLL Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */
+#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake
new file mode 100644
index 000000000..42a4c7417
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake
@@ -0,0 +1,10 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra6m5)
+
+set(JLINK_DEVICE R7FA6M5BH)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h
new file mode 100644
index 000000000..87434630f
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.h
@@ -0,0 +1,66 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1                  BSP_IO_PORT_00_PIN_08
+#define LED_STATE_ON          1
+
+#define SW1                   BSP_IO_PORT_00_PIN_05
+#define BUTTON_STATE_ACTIVE   0
+
+const ioport_pin_cfg_t board_pin_cfg[] = {
+    { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW },
+    { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
+
+    // USB FS D+, D-, VBus
+    { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH },
+    { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+
+    // USB HS D+, D-, VBus
+    { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS },
+    { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+
+    // ETM Trace
+    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
+    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
+    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
+    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
+    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.mk b/hw/bsp/ra/boards/ra6m5_ek/board.mk
new file mode 100644
index 000000000..567908b63
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.mk
@@ -0,0 +1,7 @@
+CPU_CORE = cortex-m33
+MCU_VARIANT = ra6m5
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA6M5BH
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..e41f603ad
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,65 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (2)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+  #define BSP_CFG_RTOS (1)
+#else
+  #define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+  #define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x400)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+// for SystemInit()
+void bsp_init(void * p_args);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..bd6a901c3
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (6)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..6845183db
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA6M5BH3CFC
+#define BSP_MCU_FEATURE_SET ('B')
+#define BSP_ROM_SIZE_BYTES (2097152)
+#define BSP_RAM_SIZE_BYTES (524288)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (176)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..d5428540f
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,387 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA6M5 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 1
+  #define BSP_HOCO_HZ                 (18000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ                 (20000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+
+#define BSP_CFG_FLL_ENABLE                 (0)
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
+
+#if defined(_RA_TZ_SECURE)
+            #define BSP_TZ_SECURE_BUILD           (1)
+            #define BSP_TZ_NONSECURE_BUILD        (0)
+            #elif defined(_RA_TZ_NONSECURE)
+            #define BSP_TZ_SECURE_BUILD           (0)
+            #define BSP_TZ_NONSECURE_BUILD        (1)
+            #else
+#define BSP_TZ_SECURE_BUILD           (0)
+#define BSP_TZ_NONSECURE_BUILD        (0)
+#endif
+
+/* TrustZone Settings */
+#define BSP_TZ_CFG_INIT_SECURE_ONLY       (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE))
+#define BSP_TZ_CFG_SKIP_INIT              (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY)
+#define BSP_TZ_CFG_EXCEPTION_RESPONSE     (0)
+
+/* CMSIS TrustZone Settings */
+#define SCB_CSR_AIRCR_INIT                (1)
+#define SCB_AIRCR_BFHFNMINS_VAL           (0)
+#define SCB_AIRCR_SYSRESETREQS_VAL        (1)
+#define SCB_AIRCR_PRIS_VAL                (0)
+#define TZ_FPU_NS_USAGE                   (1)
+#ifndef SCB_NSACR_CP10_11_VAL
+#define SCB_NSACR_CP10_11_VAL             (3U)
+#endif
+
+#ifndef FPU_FPCCR_TS_VAL
+#define FPU_FPCCR_TS_VAL                  (1U)
+#endif
+#define FPU_FPCCR_CLRONRETS_VAL           (1)
+
+#ifndef FPU_FPCCR_CLRONRET_VAL
+#define FPU_FPCCR_CLRONRET_VAL            (1)
+#endif
+
+/* The C-Cache line size that is configured during startup. */
+#ifndef BSP_CFG_C_CACHE_LINE_SIZE
+#define BSP_CFG_C_CACHE_LINE_SIZE   (1U)
+#endif
+
+/* Type 1 Peripheral Security Attribution */
+
+/* Peripheral Security Attribution Register (PSAR) Settings */
+#ifndef BSP_TZ_CFG_PSARB
+#define BSP_TZ_CFG_PSARB (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \
+            (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \
+            0x33f4f9) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARC
+#define BSP_TZ_CFG_PSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \
+            0x7fffcef4) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARD
+#define BSP_TZ_CFG_PSARD (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \
+            0xffae07f0) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARE
+#define BSP_TZ_CFG_PSARE (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \
+            0x3f3ff8) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_MSSAR
+#define BSP_TZ_CFG_MSSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \
+            0xfffffffc) /* Unused */
+#endif
+
+/* Type 2 Peripheral Security Attribution */
+
+/* Security attribution for Cache registers. */
+#ifndef BSP_TZ_CFG_CSAR
+#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for RSTSRn registers. */
+#ifndef BSP_TZ_CFG_RSTSAR
+#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for registers of LVD channels. */
+#ifndef BSP_TZ_CFG_LVDSAR
+#define BSP_TZ_CFG_LVDSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \
+            0xFFFFFFFCU)
+#endif
+
+/* Security attribution for LPM registers. */
+#ifndef BSP_TZ_CFG_LPMSAR
+#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU)
+#endif
+/* Deep Standby Interrupt Factor Security Attribution Register. */
+#ifndef BSP_TZ_CFG_DPFSAR
+#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution for CGC registers. */
+#ifndef BSP_TZ_CFG_CGFSAR
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect all CGC registers from Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU)
+#endif
+#endif
+
+/* Security attribution for Battery Backup registers. */
+#ifndef BSP_TZ_CFG_BBFSAR
+#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF)
+#endif
+
+/* Security attribution for registers for IRQ channels. */
+#ifndef BSP_TZ_CFG_ICUSARA
+#define BSP_TZ_CFG_ICUSARA (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \
+            0xFFFF0000U)
+#endif
+
+/* Security attribution for NMI registers. */
+#ifndef BSP_TZ_CFG_ICUSARB
+#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */
+#endif
+
+/* Security attribution for registers for DMAC channels */
+#ifndef BSP_TZ_CFG_ICUSARC
+#define BSP_TZ_CFG_ICUSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \
+            0xFFFFFF00U)
+#endif
+
+/* Security attribution registers for SELSR0. */
+#ifndef BSP_TZ_CFG_ICUSARD
+#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN0. */
+#ifndef BSP_TZ_CFG_ICUSARE
+#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN1. */
+#ifndef BSP_TZ_CFG_ICUSARF
+#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU)
+#endif
+
+/* Set DTCSTSAR if the Secure program uses the DTC. */
+#if RA_NOT_DEFINED == RA_NOT_DEFINED
+#define BSP_TZ_CFG_DTC_USED (0U)
+#else
+ #define BSP_TZ_CFG_DTC_USED (1U)
+#endif
+
+/* Security attribution of FLWT and FCKMHZ registers. */
+#ifndef BSP_TZ_CFG_FSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no
+ * reason for nonsecure applications to access FLWT and FCKMHZ. */
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect FLWT and FCKMHZ registers from nonsecure write access. */
+#define BSP_TZ_CFG_FSAR (0xFEFEU)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_FSAR (0xFFFFU)
+#endif
+#endif
+
+/* Security attribution for SRAM registers. */
+#ifndef BSP_TZ_CFG_SRAMSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access
+ * SRAM0WTEN and therefore there is no reason to access PRCR2. */
+#define BSP_TZ_CFG_SRAMSAR (\
+        1 | \
+        ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \
+        4 | \
+        0xFFFFFFF8U)
+#endif
+
+/* Security attribution for Standby RAM registers. */
+#ifndef BSP_TZ_CFG_STBRAMSAR
+#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U)
+#endif
+
+/* Security attribution for the DMAC Bus Master MPU settings. */
+#ifndef BSP_TZ_CFG_MMPUSARA
+/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */
+#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC)
+#endif
+
+/* Security Attribution Register A for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARA
+#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU)
+#endif
+/* Security Attribution Register B for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARB
+#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU)
+#endif
+
+/* Enable Uninitialized Non-Secure Application Fallback. */
+#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK
+#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U)
+#endif
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+
+/* Option Function Select Register 1 Security Attribution */
+#ifndef BSP_CFG_ROM_REG_OFS1_SEL
+#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE)
+            #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U))
+#else
+#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U)
+#endif
+#endif
+
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/* Dual Mode Select Register */
+#ifndef BSP_CFG_ROM_REG_DUALSEL
+#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U))
+#endif
+
+/* Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_BPS0
+#define BSP_CFG_ROM_REG_BPS0 (~( 0U))
+#endif
+/* Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_BPS1
+#define BSP_CFG_ROM_REG_BPS1 (~( 0U))
+#endif
+/* Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_BPS2
+#define BSP_CFG_ROM_REG_BPS2 (~( 0U))
+#endif
+/* Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_BPS3
+#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU)
+#endif
+/* Permanent Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_PBPS0
+#define BSP_CFG_ROM_REG_PBPS0 (~( 0U))
+#endif
+/* Permanent Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_PBPS1
+#define BSP_CFG_ROM_REG_PBPS1 (~( 0U))
+#endif
+/* Permanent Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_PBPS2
+#define BSP_CFG_ROM_REG_PBPS2 (~( 0U))
+#endif
+/* Permanent Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_PBPS3
+#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL0
+#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0)
+#endif
+/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL1
+#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1)
+#endif
+/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL2
+#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2)
+#endif
+/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL3
+#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3)
+#endif
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..77ac41d0a
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,35 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL_25_0 /* PLL Mul x25.0 */
+#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */
+#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL_20_0 /* PLL2 Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */
+#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* U60CK Disabled */
+#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */
+#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */
+#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */
+#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_1) /* U60CK Div /1 */
+#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */
+#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */
+#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
new file mode 100644
index 000000000..fa55d40b2
--- /dev/null
+++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
@@ -0,0 +1,35 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  Project.AddSvdFile ("Cortex-M33.svd");
+  Project.AddSvdFile ("./R7FA6M5BH.svd");
+
+  Project.SetDevice ("R7FA6M5BH");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("50 MHz");
+
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf");
+}
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+**********************************************************************
+*/
+void BeforeTargetConnect (void) {
+  //
+  // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
+  //
+}
diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c b/hw/bsp/ra/family.c
index ea2204837..00b87f335 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c
+++ b/hw/bsp/ra/family.c
@@ -26,59 +26,123 @@
 
 #include <stdio.h>
 
-#include "bsp/board.h"
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wundef"
+
+// extra push due to https://github.com/renesas/fsp/pull/278
+#pragma GCC diagnostic push
+#endif
+
 #include "bsp_api.h"
+
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
 #include "r_ioport.h"
 #include "r_ioport_api.h"
 #include "renesas.h"
 
+#include "bsp/board.h"
+#include "board.h"
+
 /* Key code for writing PRCR register. */
-#define BSP_PRV_PRCR_KEY	 (0xA500U)
+#define BSP_PRV_PRCR_KEY	       (0xA500U)
 #define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U)
-#define BSP_PRV_PRCR_LOCK	 ((BSP_PRV_PRCR_KEY) | 0x0U)
-
-#define SW1  (BSP_IO_PORT_01_PIN_05)
-#define LED1 (BSP_IO_PORT_01_PIN_06)
+#define BSP_PRV_PRCR_LOCK	       ((BSP_PRV_PRCR_KEY) | 0x0U)
 
-#define LED_STATE_ON          1
-#define BUTTON_STATE_ACTIVE   0
+static const ioport_cfg_t family_pin_cfg = {
+    .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t),
+    .p_pin_cfg_data = board_pin_cfg,
+};
+static ioport_instance_ctrl_t port_ctrl;
 
-/* ISR prototypes */
-void usbfs_interrupt_handler(void);
-void usbfs_resume_handler(void);
-void usbfs_d0fifo_handler(void);
-void usbfs_d1fifo_handler(void);
+//--------------------------------------------------------------------+
+// Vector Data
+//--------------------------------------------------------------------+
 
-BSP_DONT_REMOVE const
-  fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = {
+BSP_DONT_REMOVE const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = {
     [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */
     [1] = usbfs_resume_handler,    /* USBFS RESUME (USBFS resume interrupt) */
     [2] = usbfs_d0fifo_handler,    /* USBFS FIFO 0 (DMA transfer request 0) */
     [3] = usbfs_d1fifo_handler,    /* USBFS FIFO 1 (DMA transfer request 1) */
 };
 const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = {
-  [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT),    /* USBFS INT (USBFS interrupt) */
-  [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */
-  [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */
-  [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1)  /* USBFS FIFO 1 (DMA transfer request 1) */
+    [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT),    /* USBFS INT (USBFS interrupt) */
+    [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */
+    [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */
+    [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1)  /* USBFS FIFO 1 (DMA transfer request 1) */
 };
 
-const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = {
-  { .pin = LED1, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) },
-  { .pin = SW1 , .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) },
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_init(void)
+{
+  /* Configure pins. */
+  R_IOPORT_Open(&port_ctrl, &family_pin_cfg);
 
-  { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) },
-  { .pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) },
-  { .pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) },
+#ifdef TRACE_ETM
+  // Enable trace clock with div 1 (100 Mhz)
+  R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk;
+#endif
 
-};
+  board_led_write(false);
 
-const ioport_cfg_t g_bsp_pin_cfg = {
-  .number_of_pins = sizeof(g_bsp_pin_cfg_data) / sizeof(ioport_pin_cfg_t),
-  .p_pin_cfg_data = &g_bsp_pin_cfg_data[0],
-};
-ioport_instance_ctrl_t g_ioport_ctrl;
-const ioport_instance_t g_ioport = {.p_api = &g_ioport_on_ioport, .p_ctrl = &g_ioport_ctrl, .p_cfg = &g_bsp_pin_cfg};
+  /* Enable USB_BASE */
+  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK;
+  R_MSTP->MSTPCRB &= ~(1U << 11U);
+  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK;
+
+#if CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+#endif
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+  SysTick_Config(SystemCoreClock / 1000);
+#endif
+}
+
+void board_led_write(bool state) {
+  R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON);
+}
+
+uint32_t board_button_read(void) {
+  bsp_io_level_t lvl;
+  R_IOPORT_PinRead(&port_ctrl, SW1, &lvl);
+  return lvl == BUTTON_STATE_ACTIVE;
+}
+
+int board_uart_read(uint8_t *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+int board_uart_write(void const *buf, int len) {
+  (void) buf;
+  (void) len;
+  return 0;
+}
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+
+void SysTick_Handler(void) {
+  system_ticks++;
+}
+
+uint32_t board_millis(void) {
+  return system_ticks;
+}
+#endif
 
 //--------------------------------------------------------------------+
 // Forward USB interrupt events to TinyUSB IRQ Handler
@@ -139,94 +203,29 @@ void usbfs_d1fifo_handler(void)
 #endif
 }
 
-void board_init(void)
-{
-  /* Configure pins. */
-  R_IOPORT_Open(&g_ioport_ctrl, &g_bsp_pin_cfg);
-
-  /* Enable USB_BASE */
-  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK;
-  R_MSTP->MSTPCRB &= ~(1U << 11U);
-  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK;
-
-#if CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-  NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-  NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-  NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
-#endif
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-  /* Init systick */
-  SysTick_Config(SystemCoreClock / 1000);
-#endif
-}
-
 //--------------------------------------------------------------------+
-// Board porting API
+// stdlib
 //--------------------------------------------------------------------+
 
-void board_led_write(bool state)
-{
-  R_IOPORT_PinWrite(&g_ioport_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON);
-}
-
-uint32_t board_button_read(void)
-{
-  bsp_io_level_t lvl;
-  R_IOPORT_PinRead(&g_ioport_ctrl, SW1, &lvl);
-  return lvl == BUTTON_STATE_ACTIVE;
-}
-
-int board_uart_read(uint8_t *buf, int len)
-{
-  (void) buf;
-  (void) len;
-  return 0;
-}
-
-int board_uart_write(void const *buf, int len)
-{
-  (void) buf;
-  (void) len;
-  return 0;
-}
-
-#if CFG_TUSB_OS == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler(void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#else
-#endif
-
-int close(int fd)
-{
+int close(int fd) {
   (void) fd;
   return -1;
 }
-int fstat(int fd, void *pstat)
-{
+
+int fstat(int fd, void *pstat) {
   (void) fd;
   (void) pstat;
   return 0;
 }
-off_t lseek(int fd, off_t pos, int whence)
-{
+
+off_t lseek(int fd, off_t pos, int whence) {
   (void) fd;
   (void) pos;
   (void) whence;
   return 0;
 }
-int isatty(int fd)
-{
+
+int isatty(int fd) {
   (void) fd;
   return 1;
 }
diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake
new file mode 100644
index 000000000..f93880dff
--- /dev/null
+++ b/hw/bsp/ra/family.cmake
@@ -0,0 +1,131 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(CMSIS_DIR ${TOP}/lib/CMSIS_5)
+set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+#set(FREERTOS_PORT A_CUSTOM_PORT CACHE INTERNAL "")
+
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS RA CACHE INTERNAL "")
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    add_library(${BOARD_TARGET} STATIC
+      ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/startup.c
+      ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/system.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_clocks.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_common.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_delay.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_group_irq.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_guard.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_io.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_irq.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_register_protection.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c
+      ${FSP_RA}/src/bsp/mcu/all/bsp_security.c
+      ${FSP_RA}/src/r_ioport/r_ioport.c
+      )
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      _RA_TZ_NONSECURE
+      )
+
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      -ffreestanding
+      )
+
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg/bsp
+      ${CMSIS_DIR}/CMSIS/Core/Include
+      ${FSP_RA}/inc
+      ${FSP_RA}/inc/api
+      ${FSP_RA}/inc/instances
+      ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Include
+      ${FSP_RA}/src/bsp/mcu/all
+      ${FSP_RA}/src/bsp/mcu/${MCU_VARIANT}
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID})
+      set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld)
+    endif ()
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        # linker file
+        "LINKER:--script=${LD_FILE_GNU}"
+        -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc
+        -nostartfiles
+        # nanolib
+        --specs=nano.specs
+        --specs=nosys.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    )
+
+#  # RA has custom freertos port
+#  if (NOT TARGET freertos_kernel_port)
+#    add_library(freertos_kernel_port STATIC)
+#    target_sources(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port/port.c)
+#    target_include_directories(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port)
+#
+#    target_link_libraries(freertos_kernel_port PUBLIC freertos_kernel)
+#  endif ()
+
+    # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_RAXXX ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c
+    ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_jlink(${TARGET})
+endfunction()
diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk
index d48272e61..03125aac5 100644
--- a/hw/bsp/ra/family.mk
+++ b/hw/bsp/ra/family.mk
@@ -1,55 +1,54 @@
 DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5
 
-# Cross Compiler for RA
-CROSS_COMPILE = arm-none-eabi-
-
+FSP_RA = hw/mcu/renesas/fsp/ra/fsp
 include $(TOP)/$(BOARD_PATH)/board.mk
 
 CFLAGS += \
+  -DCFG_TUSB_MCU=OPT_MCU_RAXXX \
 	-Wno-error=undef \
 	-Wno-error=strict-prototypes \
 	-Wno-error=cast-align \
 	-Wno-error=cast-qual \
 	-Wno-error=unused-but-set-variable \
 	-Wno-error=unused-variable \
-	-mthumb \
 	-nostdlib \
 	-nostartfiles \
-	-ffunction-sections \
-	-fdata-sections \
 	-ffreestanding
 
 SRC_C += \
 	src/portable/renesas/rusb2/dcd_rusb2.c \
 	src/portable/renesas/rusb2/hcd_rusb2.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/cmsis/Device/RENESAS/Source/startup.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/cmsis/Device/RENESAS/Source/system.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_clocks.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_common.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_delay.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_group_irq.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_guard.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_io.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_irq.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_register_protection.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_rom_registers.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_sbrk.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_security.c \
-	hw/mcu/renesas/fsp/ra/fsp/src/r_ioport/r_ioport.c \
-	$(FSP_BOARD_DIR)/board_init.c \
-	$(FSP_BOARD_DIR)/board_leds.c
+	$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \
+	$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_common.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_delay.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_group_irq.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_guard.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_io.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_irq.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_register_protection.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_rom_registers.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_sbrk.c \
+	$(FSP_RA)/src/bsp/mcu/all/bsp_security.c \
+	$(FSP_RA)/src/r_ioport/r_ioport.c \
 
 INC += \
 	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
-	$(TOP)/hw/mcu/renesas/fsp/ra/fsp/src/bsp/cmsis/Device/RENESAS/Include \
 	$(TOP)/$(BOARD_PATH) \
 	$(TOP)/$(BOARD_PATH)/fsp_cfg \
-	$(TOP)/hw/mcu/renesas/fsp/ra/fsp/inc \
-	$(TOP)/hw/mcu/renesas/fsp/ra/fsp/inc/api \
-	$(TOP)/hw/mcu/renesas/fsp/ra/fsp/inc/instances \
-	$(TOP)/$(FSP_MCU_DIR) \
-	$(TOP)/$(FSP_BOARD_DIR)
+	$(TOP)/$(BOARD_PATH)/fsp_cfg/bsp \
+	$(TOP)/$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Include \
+	$(TOP)/$(FSP_RA)/inc \
+	$(TOP)/$(FSP_RA)/inc/api \
+	$(TOP)/$(FSP_RA)/inc/instances \
+	$(TOP)/$(FSP_RA)/src/bsp/mcu/$(MCU_VARIANT) \
+
+ifndef LD_FILE
+LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld
+LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc
+endif
 
 # For freeRTOS port source
 # hack to use the port provided by renesas
-FREERTOS_PORTABLE_SRC = hw/mcu/renesas/fsp/ra/fsp/src/rm_freertos_port
+FREERTOS_PORTABLE_SRC = $(FSP_RA)/src/rm_freertos_port
diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld b/hw/bsp/ra/linker/gcc/fsp.ld
index 8ddaa0a97..453d46f24 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld
+++ b/hw/bsp/ra/linker/gcc/fsp.ld
@@ -1,29 +1,3 @@
-/* generated memory regions file - do not edit */
-RAM_START = 0x20000000;
-RAM_LENGTH = 0x8000;
-FLASH_START = 0x00000000;
-FLASH_LENGTH = 0x40000;
-DATA_FLASH_START = 0x40100000;
-DATA_FLASH_LENGTH = 0x2000;
-OPTION_SETTING_START = 0x00000000;
-OPTION_SETTING_LENGTH = 0x0;
-OPTION_SETTING_S_START = 0x80000000;
-OPTION_SETTING_S_LENGTH = 0x0;
-ID_CODE_START = 0x01010018;
-ID_CODE_LENGTH = 0x20;
-SDRAM_START = 0x80010000;
-SDRAM_LENGTH = 0x0;
-QSPI_FLASH_START = 0x60000000;
-QSPI_FLASH_LENGTH = 0x0;
-OSPI_DEVICE_0_START = 0x80020000;
-OSPI_DEVICE_0_LENGTH = 0x0;
-OSPI_DEVICE_1_START = 0x80030000;
-OSPI_DEVICE_1_LENGTH = 0x0;
-
-/*
-                  Linker File for Renesas FSP
-*/
-
 /* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/
 /*
  XIP_SECONDARY_SLOT_IMAGE = 1;
@@ -553,6 +527,7 @@ SECTIONS
     {
         . = ALIGN(8);
         __HeapBase = .;
+        PROVIDE(end = .);
         /* Place the STD heap here. */
         KEEP(*(.heap))
         __HeapLimit = .;
@@ -628,6 +603,11 @@ SECTIONS
     /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool. */
     __tz_ID_CODE_S = ORIGIN(ID_CODE);
 
+    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool.
+     *       Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE
+     *       memory region between TrustZone projects. */
+    __tz_ID_CODE_N = __tz_ID_CODE_S;
+
     .id_code :
     {
         __ID_Code_Start = .;
@@ -635,8 +615,6 @@ SECTIONS
         __ID_Code_End = .;
     } > ID_CODE
 
-    /* Note: There are no secure/non-secure boundaries for ID_CODE.  These symbols are provided for the RA configuration tool. */
-    __tz_ID_CODE_N = __ID_Code_End;
 
     /* Symbol required for RA Configuration tool. */
     __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS);
diff --git a/hw/bsp/ra/linker/gcc/ra4m1.ld b/hw/bsp/ra/linker/gcc/ra4m1.ld
new file mode 100644
index 000000000..218acbb2a
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra4m1.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x8000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x40000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x01010018;
+ID_CODE_LENGTH = 0x20;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x0;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/linker/gcc/ra4m3.ld b/hw/bsp/ra/linker/gcc/ra4m3.ld
new file mode 100644
index 000000000..7b3a63fbe
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra4m3.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x20000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x100000;
+DATA_FLASH_START = 0x08000000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x0100A100;
+OPTION_SETTING_LENGTH = 0x100;
+OPTION_SETTING_S_START = 0x0100A200;
+OPTION_SETTING_S_LENGTH = 0x100;
+ID_CODE_START = 0x00000000;
+ID_CODE_LENGTH = 0x0;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/linker/gcc/ra6m1.ld b/hw/bsp/ra/linker/gcc/ra6m1.ld
new file mode 100644
index 000000000..91d27f74c
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra6m1.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x1FFE0000;
+RAM_LENGTH = 0x40000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x80000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x0100A150;
+ID_CODE_LENGTH = 0x10;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/linker/gcc/ra6m5.ld b/hw/bsp/ra/linker/gcc/ra6m5.ld
new file mode 100644
index 000000000..af747fd9b
--- /dev/null
+++ b/hw/bsp/ra/linker/gcc/ra6m5.ld
@@ -0,0 +1,22 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x80000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x200000;
+DATA_FLASH_START = 0x08000000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x0100A100;
+OPTION_SETTING_LENGTH = 0x100;
+OPTION_SETTING_S_START = 0x0100A200;
+OPTION_SETTING_S_LENGTH = 0x100;
+ID_CODE_START = 0x00000000;
+ID_CODE_LENGTH = 0x0;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x68000000;
+OSPI_DEVICE_0_LENGTH = 0x8000000;
+OSPI_DEVICE_1_START = 0x70000000;
+OSPI_DEVICE_1_LENGTH = 0x10000000;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/r_ioport_cfg.h
index cb7c07932..cb7c07932 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h
+++ b/hw/bsp/ra/r_ioport_cfg.h
diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h
new file mode 100644
index 000000000..400743d17
--- /dev/null
+++ b/hw/bsp/ra/vector_data.h
@@ -0,0 +1,29 @@
+/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */
+#ifndef VECTOR_DATA_H
+#define VECTOR_DATA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef VECTOR_DATA_IRQ_COUNT
+  #define VECTOR_DATA_IRQ_COUNT 4
+#endif
+
+/* ISR prototypes */
+void usbfs_interrupt_handler(void);
+void usbfs_resume_handler(void);
+void usbfs_d0fifo_handler(void);
+void usbfs_d1fifo_handler(void);
+
+/* Vector table allocations */
+#define TU_IRQn 0
+#define USBFS_RESUME_IRQn 1
+#define USBFS_FIFO_0_IRQn 2
+#define USBFS_FIFO_1_IRQn 3
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/rp2040/board.h b/hw/bsp/rp2040/board.h
index ccad00c4a..063c9580e 100644
--- a/hw/bsp/rp2040/board.h
+++ b/hw/bsp/rp2040/board.h
@@ -49,22 +49,24 @@
 #define UART_RX_PIN           PICO_DEFAULT_UART_RX_PIN
 #endif
 
+//--------------------------------------------------------------------+
 // PIO_USB
+// default to pin on Adafruit Feather rp2040 USB Host or Tester if defined
+//--------------------------------------------------------------------+
 
-// #define USE_ADAFRUIT_RP2040_TESTER
-#ifdef USE_ADAFRUIT_RP2040_TESTER
-#define PICO_DEFAULT_PIO_USB_DP_PIN       20
-#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN   22
+// #define USE_ADAFRUIT_FEATHER_RP2040_USBHOST
+#ifdef USE_ADAFRUIT_FEATHER_RP2040_USBHOST
+#define PICO_DEFAULT_PIO_USB_DP_PIN       16
+#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN   18
 #endif
 
-// following default to pin on Adafruit Feather rp2040 USB Host
 #ifndef PICO_DEFAULT_PIO_USB_DP_PIN
-#define PICO_DEFAULT_PIO_USB_DP_PIN       16
+#define PICO_DEFAULT_PIO_USB_DP_PIN       20
 #endif
 
 // VBUS enable pin and its active state
 #ifndef PICO_DEFAULT_PIO_USB_VBUSEN_PIN
-#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN   18
+#define PICO_DEFAULT_PIO_USB_VBUSEN_PIN   22
 #endif
 
 // VBUS enable state
diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c
index 3aa989c0e..40e3f11cd 100644
--- a/hw/bsp/rp2040/family.c
+++ b/hw/bsp/rp2040/family.c
@@ -93,12 +93,12 @@ bool __no_inline_not_in_flash_func(get_bootsel_button)(void) {
 
 static void stdio_rtt_write (const char *buf, int length)
 {
-  SEGGER_RTT_Write(0, buf, length);
+  SEGGER_RTT_Write(0, buf, (unsigned) length);
 }
 
 static int stdio_rtt_read (char *buf, int len)
 {
-  return SEGGER_RTT_Read(0, buf, len);
+  return (int) SEGGER_RTT_Read(0, buf, (unsigned) len);
 }
 
 static stdio_driver_t stdio_rtt =
@@ -149,7 +149,7 @@ void board_init(void)
 #endif
 
 #ifdef UART_DEV
-  bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_TX_PIN, GPIO_FUNC_UART));
+  bi_decl(bi_2pins_with_func(UART_TX_PIN, UART_RX_PIN, GPIO_FUNC_UART));
   uart_inst = uart_get_instance(UART_DEV);
   stdio_uart_init_full(uart_inst, CFG_BOARD_UART_BAUDRATE, UART_TX_PIN, UART_RX_PIN);
 #endif
diff --git a/hw/bsp/rp2040/family.cmake b/hw/bsp/rp2040/family.cmake
index 28637e3ee..17900dd7a 100644
--- a/hw/bsp/rp2040/family.cmake
+++ b/hw/bsp/rp2040/family.cmake
@@ -1,337 +1,358 @@
 cmake_minimum_required(VERSION 3.13)
-if (NOT TARGET _rp2040_family_inclusion_marker)
-	add_library(_rp2040_family_inclusion_marker INTERFACE)
+include_guard()
 
-	if (NOT BOARD)
-		message("BOARD not specified, defaulting to pico_sdk")
-		set(BOARD pico_sdk)
-	endif()
-
-	# add the SDK in case we are standalone tinyusb example (noop if already present)
-	include(${CMAKE_CURRENT_LIST_DIR}/pico_sdk_import.cmake)
-
-	# include basic family CMake functionality
-	set(FAMILY_MCUS RP2040)
+if (NOT BOARD)
+	message("BOARD not specified, defaulting to pico_sdk")
+	set(BOARD pico_sdk)
+endif()
 
-	include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+# add the SDK in case we are standalone tinyusb example (noop if already present)
+include(${CMAKE_CURRENT_LIST_DIR}/pico_sdk_import.cmake)
 
-	# TOP is absolute path to root directory of TinyUSB git repo
-	#set(TOP "${CMAKE_CURRENT_LIST_DIR}/../../..")
-	#get_filename_component(TOP "${TOP}" REALPATH)
+# include basic family CMake functionality
+set(FAMILY_MCUS RP2040)
+set(JLINK_DEVICE rp2040_m0_0)
 
-	if (NOT PICO_TINYUSB_PATH)
-		set(PICO_TINYUSB_PATH ${TOP})
-	endif()
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
 
-	if (NOT TINYUSB_OPT_OS)
-		set(TINYUSB_OPT_OS OPT_OS_PICO)
-	endif()
+if (NOT PICO_TINYUSB_PATH)
+	set(PICO_TINYUSB_PATH ${TOP})
+endif()
 
-	#------------------------------------
-	# Base config for both device and host; wrapped by SDK's tinyusb_common
-	#------------------------------------
-	add_library(tinyusb_common_base INTERFACE)
+if (NOT TINYUSB_OPT_OS)
+	set(TINYUSB_OPT_OS OPT_OS_PICO)
+endif()
 
-	target_sources(tinyusb_common_base INTERFACE
-			${TOP}/src/tusb.c
-			${TOP}/src/common/tusb_fifo.c
-			)
+#------------------------------------
+# Base config for both device and host; wrapped by SDK's tinyusb_common
+#------------------------------------
+add_library(tinyusb_common_base INTERFACE)
 
-	target_include_directories(tinyusb_common_base INTERFACE
-			${TOP}/src
-			${TOP}/src/common
-			${TOP}/hw
-			)
+target_sources(tinyusb_common_base INTERFACE
+		${TOP}/src/tusb.c
+		${TOP}/src/common/tusb_fifo.c
+		)
 
-	target_link_libraries(tinyusb_common_base INTERFACE
-			hardware_structs
-			hardware_irq
-			hardware_resets
-			pico_sync
-			)
+target_include_directories(tinyusb_common_base INTERFACE
+		${TOP}/src
+		)
 
+if(DEFINED LOG)
+	set(TINYUSB_DEBUG_LEVEL ${LOG})
+elseif (CMAKE_BUILD_TYPE STREQUAL "Debug")
+	message("Compiling TinyUSB with CFG_TUSB_DEBUG=1")
+	set(TINYUSB_DEBUG_LEVEL 1)
+else ()
 	set(TINYUSB_DEBUG_LEVEL 0)
-	if (CMAKE_BUILD_TYPE STREQUAL "Debug")
-		message("Compiling TinyUSB with CFG_TUSB_DEBUG=1")
-		set(TINYUSB_DEBUG_LEVEL 1)
-	endif()
+endif()
+
+target_compile_definitions(tinyusb_common_base INTERFACE
+		CFG_TUSB_MCU=OPT_MCU_RP2040
+		CFG_TUSB_OS=${TINYUSB_OPT_OS}
+		CFG_TUSB_DEBUG=${TINYUSB_DEBUG_LEVEL}
+)
 
-	target_compile_definitions(tinyusb_common_base INTERFACE
-			CFG_TUSB_MCU=OPT_MCU_RP2040
-			CFG_TUSB_OS=${TINYUSB_OPT_OS}
-			#CFG_TUSB_DEBUG=${TINYUSB_DEBUG_LEVEL}
+target_link_libraries(tinyusb_common_base INTERFACE
+	hardware_structs
+	hardware_irq
+	hardware_resets
+	pico_sync
 	)
 
-	#------------------------------------
-	# Base config for device mode; wrapped by SDK's tinyusb_device
-	#------------------------------------
-	add_library(tinyusb_device_base INTERFACE)
-	target_sources(tinyusb_device_base INTERFACE
-			${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c
-			${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c
-			${TOP}/src/device/usbd.c
-			${TOP}/src/device/usbd_control.c
-			${TOP}/src/class/audio/audio_device.c
-			${TOP}/src/class/cdc/cdc_device.c
-			${TOP}/src/class/dfu/dfu_device.c
-			${TOP}/src/class/dfu/dfu_rt_device.c
-			${TOP}/src/class/hid/hid_device.c
-			${TOP}/src/class/midi/midi_device.c
-			${TOP}/src/class/msc/msc_device.c
-			${TOP}/src/class/net/ecm_rndis_device.c
-			${TOP}/src/class/net/ncm_device.c
-			${TOP}/src/class/usbtmc/usbtmc_device.c
-			${TOP}/src/class/vendor/vendor_device.c
-			${TOP}/src/class/video/video_device.c
-			)
+#------------------------------------
+# Base config for device mode; wrapped by SDK's tinyusb_device
+#------------------------------------
+add_library(tinyusb_device_base INTERFACE)
+target_sources(tinyusb_device_base INTERFACE
+		${TOP}/src/portable/raspberrypi/rp2040/dcd_rp2040.c
+		${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c
+		${TOP}/src/device/usbd.c
+		${TOP}/src/device/usbd_control.c
+		${TOP}/src/class/audio/audio_device.c
+		${TOP}/src/class/cdc/cdc_device.c
+		${TOP}/src/class/dfu/dfu_device.c
+		${TOP}/src/class/dfu/dfu_rt_device.c
+		${TOP}/src/class/hid/hid_device.c
+		${TOP}/src/class/midi/midi_device.c
+		${TOP}/src/class/msc/msc_device.c
+		${TOP}/src/class/net/ecm_rndis_device.c
+		${TOP}/src/class/net/ncm_device.c
+		${TOP}/src/class/usbtmc/usbtmc_device.c
+		${TOP}/src/class/vendor/vendor_device.c
+		${TOP}/src/class/video/video_device.c
+		)
+
+#------------------------------------
+# Base config for host mode; wrapped by SDK's tinyusb_host
+#------------------------------------
+add_library(tinyusb_host_base INTERFACE)
+target_sources(tinyusb_host_base INTERFACE
+		${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c
+		${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c
+		${TOP}/src/host/usbh.c
+		${TOP}/src/host/hub.c
+		${TOP}/src/class/cdc/cdc_host.c
+		${TOP}/src/class/hid/hid_host.c
+		${TOP}/src/class/msc/msc_host.c
+		${TOP}/src/class/vendor/vendor_host.c
+		)
 
-	#------------------------------------
-	# Base config for host mode; wrapped by SDK's tinyusb_host
-	#------------------------------------
-	add_library(tinyusb_host_base INTERFACE)
-	target_sources(tinyusb_host_base INTERFACE
-			${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c
-			${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c
-			${TOP}/src/host/usbh.c
-			${TOP}/src/host/hub.c
-			${TOP}/src/class/cdc/cdc_host.c
-			${TOP}/src/class/hid/hid_host.c
-			${TOP}/src/class/msc/msc_host.c
-			${TOP}/src/class/vendor/vendor_host.c
-			)
+# Sometimes have to do host specific actions in mostly common functions
+target_compile_definitions(tinyusb_host_base INTERFACE
+		RP2040_USB_HOST_MODE=1
+)
 
-	# Sometimes have to do host specific actions in mostly common functions
-	target_compile_definitions(tinyusb_host_base INTERFACE
-			RP2040_USB_HOST_MODE=1
+#------------------------------------
+# BSP & Additions
+#------------------------------------
+add_library(tinyusb_bsp INTERFACE)
+target_sources(tinyusb_bsp INTERFACE
+	${TOP}/hw/bsp/rp2040/family.c
+	)
+target_include_directories(tinyusb_bsp INTERFACE
+	${TOP}/hw
 	)
 
-	#------------------------------------
-	# BSP & Additions
-	#------------------------------------
-	add_library(tinyusb_bsp INTERFACE)
-	target_sources(tinyusb_bsp INTERFACE
-			${TOP}/hw/bsp/rp2040/family.c
-			)
-	#	target_include_directories(tinyusb_bsp INTERFACE
-	#			${TOP}/hw/bsp/rp2040)
+# tinyusb_additions will hold our extra settings for examples
+add_library(tinyusb_additions INTERFACE)
 
-	# tinyusb_additions will hold our extra settings for examples
-	add_library(tinyusb_additions INTERFACE)
+target_compile_definitions(tinyusb_additions INTERFACE
+	PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
+	PICO_RP2040_USB_DEVICE_UFRAME_FIX=1
+)
 
+if(LOGGER STREQUAL "RTT" OR LOGGER STREQUAL "rtt")
 	target_compile_definitions(tinyusb_additions INTERFACE
-		PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
-		PICO_RP2040_USB_DEVICE_UFRAME_FIX=1
+			LOGGER_RTT
+			SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL
 	)
 
-	if(DEFINED LOG)
-		target_compile_definitions(tinyusb_additions INTERFACE CFG_TUSB_DEBUG=${LOG})
+	target_sources(tinyusb_additions INTERFACE
+			${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
+	)
+
+	set_source_files_properties(${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
+		PROPERTIES
+		COMPILE_FLAGS "-Wno-cast-qual -Wno-cast-align -Wno-sign-conversion")
+
+	target_include_directories(tinyusb_additions INTERFACE
+			${TOP}/lib/SEGGER_RTT/RTT
+	)
+endif()
+
+#------------------------------------
+# Functions
+#------------------------------------
+
+function(family_configure_target TARGET RTOS)
+	if (RTOS STREQUAL noos OR RTOS STREQUAL "")
+		set(RTOS_SUFFIX "")
+	else()
+		set(RTOS_SUFFIX _${RTOS})
 	endif()
+	# export RTOS_SUFFIX to parent scope
+	set(RTOS_SUFFIX ${RTOS_SUFFIX} PARENT_SCOPE)
 
-	if(LOGGER STREQUAL "rtt")
-		target_compile_definitions(tinyusb_additions INTERFACE
-				LOGGER_RTT
-				SEGGER_RTT_MODE_DEFAULT=SEGGER_RTT_MODE_BLOCK_IF_FIFO_FULL
-		)
+	pico_add_extra_outputs(${TARGET})
+	pico_enable_stdio_uart(${TARGET} 1)
+	target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board${RTOS_SUFFIX} tinyusb_additions)
 
-		target_sources(tinyusb_additions INTERFACE
-				${TOP}/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
-		)
+	family_flash_jlink(${TARGET})
+endfunction()
 
-		target_include_directories(tinyusb_additions INTERFACE
-				${TOP}/lib/SEGGER_RTT/RTT
-		)
+
+function(rp2040_family_configure_example_warnings TARGET)
+	if (NOT PICO_TINYUSB_NO_EXAMPLE_WARNINGS)
+		family_add_default_example_warnings(${TARGET})
+	endif()
+	if(CMAKE_C_COMPILER_ID STREQUAL "Clang")
+		target_compile_options(${TARGET} PRIVATE -Wno-unreachable-code)
 	endif()
+	suppress_tinyusb_warnings()
+endfunction()
 
-	#------------------------------------
-	# Functions
-	#------------------------------------
 
-	function(family_configure_target TARGET)
-		pico_add_extra_outputs(${TARGET})
-		pico_enable_stdio_uart(${TARGET} 1)
-		target_link_libraries(${TARGET} PUBLIC pico_stdlib pico_bootsel_via_double_reset tinyusb_board tinyusb_additions)
-	endfunction()
+function(family_configure_device_example TARGET RTOS)
+	family_configure_target(${TARGET} ${RTOS})
+	target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device${RTOS_SUFFIX})
+	rp2040_family_configure_example_warnings(${TARGET})
+endfunction()
 
-	function(rp2040_family_configure_example_warnings TARGET)
-		if (NOT PICO_TINYUSB_NO_EXAMPLE_WARNINGS)
-			family_add_default_example_warnings(${TARGET})
-		endif()
-		if(CMAKE_C_COMPILER_ID STREQUAL "Clang")
-			target_compile_options(${TARGET} PRIVATE -Wno-unreachable-code)
-		endif()
-		suppress_tinyusb_warnings()
-	endfunction()
 
-	function(family_configure_device_example TARGET)
-		family_configure_target(${TARGET})
-		target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device)
-		rp2040_family_configure_example_warnings(${TARGET})
-	endfunction()
+function(family_add_pico_pio_usb TARGET)
+	target_link_libraries(${TARGET} PUBLIC tinyusb_pico_pio_usb)
+endfunction()
 
-	function(family_add_pico_pio_usb TARGET)
-		target_link_libraries(${TARGET} PUBLIC tinyusb_pico_pio_usb)
-	endfunction()
+# since Pico-PIO_USB compiler support may lag, and change from version to version, add a function that pico-sdk/pico-examples
+# can check (if present) in case the user has updated their TinyUSB
+function(is_compiler_supported_by_pico_pio_usb OUTVAR)
+	if ((NOT CMAKE_C_COMPILER_ID STREQUAL "GNU"))
+		SET(${OUTVAR} 0 PARENT_SCOPE)
+	else()
+		set(${OUTVAR} 1 PARENT_SCOPE)
+	endif()
+endfunction()
 
-	function(family_configure_host_example TARGET)
-		family_configure_target(${TARGET})
-		target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host)
-		rp2040_family_configure_example_warnings(${TARGET})
+function(family_configure_host_example TARGET RTOS)
+	family_configure_target(${TARGET} ${RTOS})
+	target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_host${RTOS_SUFFIX})
+	rp2040_family_configure_example_warnings(${TARGET})
 
-		# For rp2040 enable pico-pio-usb
-		if (TARGET tinyusb_pico_pio_usb)
-			# code does not compile with non GCC, or GCC 11.3+
-			if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 11.3)
-				family_add_pico_pio_usb(${PROJECT})
-			endif()
+	# For rp2040 enable pico-pio-usb
+	if (TARGET tinyusb_pico_pio_usb)
+		# Pico-PIO-USB does not compile with all pico-sdk supported compilers, so check before enabling it
+		is_compiler_supported_by_pico_pio_usb(PICO_PIO_USB_COMPILER_SUPPORTED)
+		if (PICO_PIO_USB_COMPILER_SUPPORTED)
+			family_add_pico_pio_usb(${PROJECT})
 		endif()
-	endfunction()
+	endif()
+endfunction()
 
-	function(family_configure_dual_usb_example TARGET)
-		family_configure_target(${TARGET})
-		# require tinyusb_pico_pio_usb
-		target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_host tinyusb_pico_pio_usb )
-		rp2040_family_configure_example_warnings(${TARGET})
-	endfunction()
 
-	function(check_and_add_pico_pio_usb_support)
-		# check for pico_generate_pio_header (as depending on environment we may be called before SDK is
-		# initialized in which case it isn't available yet), and only do the initialization once
-		if (COMMAND pico_generate_pio_header AND NOT TARGET tinyusb_pico_pio_usb)
-			#------------------------------------
-			# PIO USB for both host and device
-			#------------------------------------
+function(family_configure_dual_usb_example TARGET RTOS)
+	family_configure_target(${TARGET} ${RTOS})
+	# require tinyusb_pico_pio_usb
+	target_link_libraries(${TARGET} PUBLIC pico_stdlib tinyusb_device tinyusb_host tinyusb_pico_pio_usb )
+	rp2040_family_configure_example_warnings(${TARGET})
+endfunction()
 
-			if (NOT DEFINED PICO_PIO_USB_PATH)
-				set(PICO_PIO_USB_PATH "${TOP}/hw/mcu/raspberry_pi/Pico-PIO-USB")
-			endif()
 
-			if (EXISTS ${PICO_PIO_USB_PATH}/src/pio_usb.c)
-				add_library(tinyusb_pico_pio_usb INTERFACE)
-				target_sources(tinyusb_device_base INTERFACE
-						${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c
-						)
-				target_sources(tinyusb_host_base INTERFACE
-						${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c
-						)
+function(check_and_add_pico_pio_usb_support)
+	# check for pico_generate_pio_header (as depending on environment we may be called before SDK is
+	# initialized in which case it isn't available yet), and only do the initialization once
+	if (COMMAND pico_generate_pio_header AND NOT TARGET tinyusb_pico_pio_usb)
+		#------------------------------------
+		# PIO USB for both host and device
+		#------------------------------------
 
-				target_sources(tinyusb_pico_pio_usb INTERFACE
-						${PICO_PIO_USB_PATH}/src/pio_usb.c
-						${PICO_PIO_USB_PATH}/src/pio_usb_host.c
-						${PICO_PIO_USB_PATH}/src/pio_usb_device.c
-						${PICO_PIO_USB_PATH}/src/usb_crc.c
-						)
+		if (NOT DEFINED PICO_PIO_USB_PATH)
+			set(PICO_PIO_USB_PATH "${TOP}/hw/mcu/raspberry_pi/Pico-PIO-USB")
+		endif()
 
-				target_include_directories(tinyusb_pico_pio_usb INTERFACE
-						${PICO_PIO_USB_PATH}/src
-						)
+		if (EXISTS ${PICO_PIO_USB_PATH}/src/pio_usb.c)
+			add_library(tinyusb_pico_pio_usb INTERFACE)
+			target_sources(tinyusb_device_base INTERFACE
+					${TOP}/src/portable/raspberrypi/pio_usb/dcd_pio_usb.c
+					)
+			target_sources(tinyusb_host_base INTERFACE
+					${TOP}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c
+					)
 
-				target_link_libraries(tinyusb_pico_pio_usb INTERFACE
-						hardware_dma
-						hardware_pio
-						pico_multicore
-						)
+			target_sources(tinyusb_pico_pio_usb INTERFACE
+					${PICO_PIO_USB_PATH}/src/pio_usb.c
+					${PICO_PIO_USB_PATH}/src/pio_usb_host.c
+					${PICO_PIO_USB_PATH}/src/pio_usb_device.c
+					${PICO_PIO_USB_PATH}/src/usb_crc.c
+					)
 
-				target_compile_definitions(tinyusb_pico_pio_usb INTERFACE
-						PIO_USB_USE_TINYUSB
-						)
+			target_include_directories(tinyusb_pico_pio_usb INTERFACE
+					${PICO_PIO_USB_PATH}/src
+					)
+
+			target_link_libraries(tinyusb_pico_pio_usb INTERFACE
+					hardware_dma
+					hardware_pio
+					pico_multicore
+					)
 
-				pico_generate_pio_header(tinyusb_pico_pio_usb ${PICO_PIO_USB_PATH}/src/usb_tx.pio)
-				pico_generate_pio_header(tinyusb_pico_pio_usb ${PICO_PIO_USB_PATH}/src/usb_rx.pio)
-			endif()
+			target_compile_definitions(tinyusb_pico_pio_usb INTERFACE
+					PIO_USB_USE_TINYUSB
+					)
+
+			pico_generate_pio_header(tinyusb_pico_pio_usb ${PICO_PIO_USB_PATH}/src/usb_tx.pio)
+			pico_generate_pio_header(tinyusb_pico_pio_usb ${PICO_PIO_USB_PATH}/src/usb_rx.pio)
 		endif()
-	endfunction()
+	endif()
+endfunction()
 
-	# Try to add Pico-PIO_USB support now for the case where this file is included directly
-	# after Pico SDK initialization, but without using the family_ functions (as is the case
-	# when included by the SDK itself)
-	check_and_add_pico_pio_usb_support()
+# Try to add Pico-PIO_USB support now for the case where this file is included directly
+# after Pico SDK initialization, but without using the family_ functions (as is the case
+# when included by the SDK itself)
+check_and_add_pico_pio_usb_support()
 
-	function(family_initialize_project PROJECT DIR)
-		# call the original version of this function from family_common.cmake
-		_family_initialize_project(${PROJECT} ${DIR})
-		enable_language(C CXX ASM)
-		pico_sdk_init()
 
-		# now re-check for adding Pico-PIO_USB support now SDK is definitely available
-		check_and_add_pico_pio_usb_support()
-	endfunction()
+function(family_initialize_project PROJECT DIR)
+	# call the original version of this function from family_common.cmake
+	_family_initialize_project(${PROJECT} ${DIR})
+	enable_language(C CXX ASM)
+	pico_sdk_init()
 
-	# This method must be called from the project scope to suppress known warnings in TinyUSB source files
-	function(suppress_tinyusb_warnings)
-		# some of these are pretty silly warnings only occurring in some older GCC versions 9 or prior
-		if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
-			if (CMAKE_C_COMPILER_VERSION VERSION_LESS 10.0)
-				set(CONVERSION_WARNING_FILES
-					${PICO_TINYUSB_PATH}/src/tusb.c
-					${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c
-					${PICO_TINYUSB_PATH}/src/device/usbd.c
-					${PICO_TINYUSB_PATH}/src/device/usbd_control.c
-					${PICO_TINYUSB_PATH}/src/host/usbh.c
-					${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c
-					${PICO_TINYUSB_PATH}/src/class/cdc/cdc_host.c
-					${PICO_TINYUSB_PATH}/src/class/hid/hid_device.c
-					${PICO_TINYUSB_PATH}/src/class/hid/hid_host.c
-					${PICO_TINYUSB_PATH}/src/class/audio/audio_device.c
-					${PICO_TINYUSB_PATH}/src/class/dfu/dfu_device.c
-					${PICO_TINYUSB_PATH}/src/class/dfu/dfu_rt_device.c
-					${PICO_TINYUSB_PATH}/src/class/midi/midi_device.c
-					${PICO_TINYUSB_PATH}/src/class/usbtmc/usbtmc_device.c
-					${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/hcd_rp2040.c
-					)
-				foreach(SOURCE_FILE IN LISTS CONVERSION_WARNING_FILES)
-					set_source_files_properties(
-							${SOURCE_FILE}
-							PROPERTIES
-							COMPILE_FLAGS "-Wno-conversion")
-				endforeach()
-			endif()
-			if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 11.0)
+	# now re-check for adding Pico-PIO_USB support now SDK is definitely available
+	check_and_add_pico_pio_usb_support()
+endfunction()
+
+
+# This method must be called from the project scope to suppress known warnings in TinyUSB source files
+function(suppress_tinyusb_warnings)
+	# some of these are pretty silly warnings only occurring in some older GCC versions 9 or prior
+	if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+		if (CMAKE_C_COMPILER_VERSION VERSION_LESS 10.0)
+			set(CONVERSION_WARNING_FILES
+				${PICO_TINYUSB_PATH}/src/tusb.c
+				${PICO_TINYUSB_PATH}/src/common/tusb_fifo.c
+				${PICO_TINYUSB_PATH}/src/device/usbd.c
+				${PICO_TINYUSB_PATH}/src/device/usbd_control.c
+				${PICO_TINYUSB_PATH}/src/host/usbh.c
+				${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c
+				${PICO_TINYUSB_PATH}/src/class/cdc/cdc_host.c
+				${PICO_TINYUSB_PATH}/src/class/hid/hid_device.c
+				${PICO_TINYUSB_PATH}/src/class/hid/hid_host.c
+				${PICO_TINYUSB_PATH}/src/class/audio/audio_device.c
+				${PICO_TINYUSB_PATH}/src/class/dfu/dfu_device.c
+				${PICO_TINYUSB_PATH}/src/class/dfu/dfu_rt_device.c
+				${PICO_TINYUSB_PATH}/src/class/midi/midi_device.c
+				${PICO_TINYUSB_PATH}/src/class/usbtmc/usbtmc_device.c
+				${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/hcd_rp2040.c
+				)
+			foreach(SOURCE_FILE IN LISTS CONVERSION_WARNING_FILES)
 				set_source_files_properties(
-						${PICO_TINYUSB_PATH}/lib/fatfs/source/ff.c
-						COMPILE_FLAGS "-Wno-stringop-overflow -Wno-array-bounds")
-			endif()
+						${SOURCE_FILE}
+						PROPERTIES
+						COMPILE_FLAGS "-Wno-conversion")
+			endforeach()
+		endif()
+		if (CMAKE_C_COMPILER_ID STREQUAL "GNU" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL 11.0)
 			set_source_files_properties(
 					${PICO_TINYUSB_PATH}/lib/fatfs/source/ff.c
-					PROPERTIES
-					COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual")
+					COMPILE_FLAGS "-Wno-stringop-overflow -Wno-array-bounds")
+		endif()
+		set_source_files_properties(
+				${PICO_TINYUSB_PATH}/lib/fatfs/source/ff.c
+				PROPERTIES
+				COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual")
 
-			set_source_files_properties(
-					${PICO_TINYUSB_PATH}/lib/lwip/src/core/tcp_in.c
-					${PICO_TINYUSB_PATH}/lib/lwip/src/core/tcp_out.c
-					PROPERTIES
-					COMPILE_FLAGS "-Wno-conversion")
+		set_source_files_properties(
+				${PICO_TINYUSB_PATH}/lib/lwip/src/core/tcp_in.c
+				${PICO_TINYUSB_PATH}/lib/lwip/src/core/tcp_out.c
+				PROPERTIES
+				COMPILE_FLAGS "-Wno-conversion")
 
-			set_source_files_properties(
-					${PICO_TINYUSB_PATH}/lib/networking/dnserver.c
-					${PICO_TINYUSB_PATH}/lib/networking/dhserver.c
-					${PICO_TINYUSB_PATH}/lib/networking/rndis_reports.c
-					PROPERTIES
-					COMPILE_FLAGS "-Wno-conversion -Wno-sign-conversion")
+		set_source_files_properties(
+				${PICO_TINYUSB_PATH}/lib/networking/dnserver.c
+				${PICO_TINYUSB_PATH}/lib/networking/dhserver.c
+				${PICO_TINYUSB_PATH}/lib/networking/rndis_reports.c
+				PROPERTIES
+				COMPILE_FLAGS "-Wno-conversion -Wno-sign-conversion")
 
-			if (TARGET tinyusb_pico_pio_usb)
-				set_source_files_properties(
-						${PICO_TINYUSB_PATH}/hw/mcu/raspberry_pi/Pico-PIO-USB/src/pio_usb_device.c
-						${PICO_TINYUSB_PATH}/hw/mcu/raspberry_pi/Pico-PIO-USB/src/pio_usb.c
-						${PICO_TINYUSB_PATH}/hw/mcu/raspberry_pi/Pico-PIO-USB/src/pio_usb_host.c
-						${PICO_TINYUSB_PATH}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c
-						PROPERTIES
-						COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual -Wno-attributes")
-			endif()
-		elseif(CMAKE_C_COMPILER_ID STREQUAL "Clang")
-			set_source_files_properties(
-					${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c
-					COMPILE_FLAGS "-Wno-unreachable-code")
-			set_source_files_properties(
-					${PICO_TINYUSB_PATH}/src/class/cdc/cdc_host.c
-					COMPILE_FLAGS "-Wno-unreachable-code-fallthrough")
+		if (TARGET tinyusb_pico_pio_usb)
 			set_source_files_properties(
-					${PICO_TINYUSB_PATH}/lib/fatfs/source/ff.c
+					${PICO_TINYUSB_PATH}/hw/mcu/raspberry_pi/Pico-PIO-USB/src/pio_usb_device.c
+					${PICO_TINYUSB_PATH}/hw/mcu/raspberry_pi/Pico-PIO-USB/src/pio_usb.c
+					${PICO_TINYUSB_PATH}/hw/mcu/raspberry_pi/Pico-PIO-USB/src/pio_usb_host.c
+					${PICO_TINYUSB_PATH}/src/portable/raspberrypi/pio_usb/hcd_pio_usb.c
 					PROPERTIES
-					COMPILE_FLAGS "-Wno-cast-qual")
+					COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual -Wno-attributes")
 		endif()
-	endfunction()
-
-	# rp2040 does not support freeRTOS example yet
-	function(family_add_freertos TARGET)
-	endfunction()
-endif()
+	elseif(CMAKE_C_COMPILER_ID STREQUAL "Clang")
+		set_source_files_properties(
+				${PICO_TINYUSB_PATH}/src/class/cdc/cdc_device.c
+				COMPILE_FLAGS "-Wno-unreachable-code")
+		set_source_files_properties(
+				${PICO_TINYUSB_PATH}/src/class/cdc/cdc_host.c
+				COMPILE_FLAGS "-Wno-unreachable-code-fallthrough")
+		set_source_files_properties(
+				${PICO_TINYUSB_PATH}/lib/fatfs/source/ff.c
+				PROPERTIES
+				COMPILE_FLAGS "-Wno-cast-qual")
+	endif()
+endfunction()
diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk
index a2a5268aa..43a60a122 100644
--- a/hw/bsp/samd11/family.mk
+++ b/hw/bsp/samd11/family.mk
@@ -1,11 +1,10 @@
 DEPS_SUBMODULES += hw/mcu/microchip
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
   -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
   -nostdlib -nostartfiles \
   -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \
   -DOSC32K_OVERWRITE_CALIBRATION=0 \
@@ -40,6 +39,3 @@ INC += \
 	$(TOP)/hw/mcu/microchip/samd11/hri \
 	$(TOP)/hw/mcu/microchip/samd11/CMSIS/Include \
 	$(TOP)/hw/mcu/microchip/samd11/CMSIS/Core/Include
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
diff --git a/hw/bsp/samd21/family.mk b/hw/bsp/samd21/family.mk
index 30eccacb2..49a1a781a 100644
--- a/hw/bsp/samd21/family.mk
+++ b/hw/bsp/samd21/family.mk
@@ -2,12 +2,10 @@ UF2_FAMILY_ID = 0x68ed2b88
 DEPS_SUBMODULES += hw/mcu/microchip
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
   -nostdlib -nostartfiles \
   -DCONF_DFLL_OVERWRITE_CALIBRATION=0 \
   -DCFG_TUSB_MCU=OPT_MCU_SAMD21
@@ -39,9 +37,6 @@ INC += \
 	$(TOP)/hw/mcu/microchip/samd21/hri \
 	$(TOP)/hw/mcu/microchip/samd21/CMSIS/Include
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
-
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/
 # Add it to your PATH or change BOSSAC variable to match your installation
diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk
index 657e33438..9a6c67e1a 100644
--- a/hw/bsp/samd51/family.mk
+++ b/hw/bsp/samd51/family.mk
@@ -2,14 +2,10 @@ UF2_FAMILY_ID = 0x55114460
 DEPS_SUBMODULES += hw/mcu/microchip
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles \
   -DCFG_TUSB_MCU=OPT_MCU_SAMD51
 
@@ -37,9 +33,6 @@ INC += \
 	$(TOP)/hw/mcu/microchip/samd51/hri \
 	$(TOP)/hw/mcu/microchip/samd51/CMSIS/Include
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
-
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/
 # Add it to your PATH or change BOSSAC variable to match your installation
diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk
index df1af4a9d..691863f11 100644
--- a/hw/bsp/same5x/family.mk
+++ b/hw/bsp/same5x/family.mk
@@ -2,14 +2,11 @@ DEPS_SUBMODULES += hw/mcu/microchip
 
 SDK_DIR = hw/mcu/microchip/$(MCU)
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 CFLAGS += \
   -mthumb \
-  -mabi=aapcs \
   -mlong-calls \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles \
   -DCFG_TUSB_MCU=OPT_MCU_SAME5X
 
@@ -32,9 +29,6 @@ INC += \
 	$(TOP)/$(SDK_DIR)/hri \
 	$(TOP)/$(SDK_DIR)/CMSIS/Include
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
-
 # flash using edbg from https://github.com/ataradov/edbg
 flash-edbg: $(BUILD)/$(PROJECT).bin
 	edbg --verbose -t $(MCU) -pv -f $<
diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk
index 62e5f8f4a..0acb0ed14 100644
--- a/hw/bsp/saml2x/family.mk
+++ b/hw/bsp/saml2x/family.mk
@@ -1,14 +1,11 @@
 UF2_FAMILY_ID = 0x68ed2b88
 DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/microchip
+MCU_DIR = hw/mcu/microchip/$(SAML_VARIANT)
 
 include $(TOP)/$(BOARD_PATH)/board.mk
-
-MCU_DIR = hw/mcu/microchip/$(SAML_VARIANT)
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
   -nostdlib -nostartfiles \
   -DCONF_OSC32K_CALIB_ENABLE=0 \
   -DCFG_TUSB_MCU=OPT_MCU_SAML22
@@ -41,9 +38,6 @@ INC += \
 	$(TOP)/$(MCU_DIR)/hri \
 	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
-
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/
 # Add it to your PATH or change BOSSAC variable to match your installation
diff --git a/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..fc2f9fc67
--- /dev/null
+++ b/hw/bsp/stm32f0/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32f0xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       2
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.cmake b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.cmake
new file mode 100644
index 000000000..61fec0d30
--- /dev/null
+++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.cmake
@@ -0,0 +1,11 @@
+set(MCU_VARIANT stm32f070xb)
+set(JLINK_DEVICE stm32f070rb)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/stm32F070rbtx_flash.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F070xB
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk
index 1cc443352..63f6a31c2 100644
--- a/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk
+++ b/hw/bsp/stm32f0/boards/stm32f070rbnucleo/board.mk
@@ -1,12 +1,9 @@
-CFLAGS += -DSTM32F070xB -DCFG_EXAMPLE_VIDEO_READONLY
+MCU_VARIANT = stm32f070xb
 
-# GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f070xb.s
-GCC_LD_FILE = $(BOARD_PATH)/stm32F070rbtx_flash.ld
+CFLAGS += -DSTM32F070xB -DCFG_EXAMPLE_VIDEO_READONLY
 
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f070xb.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f070xb_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/stm32F070rbtx_flash.ld
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f070rb
diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.cmake b/hw/bsp/stm32f0/boards/stm32f072disco/board.cmake
new file mode 100644
index 000000000..287593f43
--- /dev/null
+++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.cmake
@@ -0,0 +1,11 @@
+set(MCU_VARIANT stm32f072xb)
+set(JLINK_DEVICE stm32f072rb)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F072RBTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F072xB
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/stm32f0/boards/stm32f072disco/board.mk b/hw/bsp/stm32f0/boards/stm32f072disco/board.mk
index 4216ba186..57c658629 100644
--- a/hw/bsp/stm32f0/boards/stm32f072disco/board.mk
+++ b/hw/bsp/stm32f0/boards/stm32f072disco/board.mk
@@ -1,10 +1,9 @@
-CFLAGS += -DSTM32F072xB -DCFG_EXAMPLE_VIDEO_READONLY
+MCU_VARIANT = stm32f072xb
 
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F072RBTx_FLASH.ld
+CFLAGS += -DSTM32F072xB -DCFG_EXAMPLE_VIDEO_READONLY
 
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f072xb.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f072xb_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F072RBTx_FLASH.ld
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f072rb
diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.cmake b/hw/bsp/stm32f0/boards/stm32f072eval/board.cmake
new file mode 100644
index 000000000..42d778cb5
--- /dev/null
+++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.cmake
@@ -0,0 +1,12 @@
+set(MCU_VARIANT stm32f072xb)
+set(JLINK_DEVICE stm32f072vb)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F072VBTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F072xB
+    LSI_VALUE=40000
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/stm32f0/boards/stm32f072eval/board.mk b/hw/bsp/stm32f0/boards/stm32f072eval/board.mk
index bb9cba22a..bab889524 100644
--- a/hw/bsp/stm32f0/boards/stm32f072eval/board.mk
+++ b/hw/bsp/stm32f0/boards/stm32f072eval/board.mk
@@ -1,10 +1,9 @@
-CFLAGS += -DSTM32F072xB -DLSI_VALUE=40000 -DCFG_EXAMPLE_VIDEO_READONLY
+MCU_VARIANT = stm32f072xb
 
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f072xb.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F072VBTx_FLASH.ld
+CFLAGS += -DSTM32F072xB -DLSI_VALUE=40000 -DCFG_EXAMPLE_VIDEO_READONLY
 
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f072xb.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f072xb_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F072VBTx_FLASH.ld
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f072vb
diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake
new file mode 100644
index 000000000..e0fc705f8
--- /dev/null
+++ b/hw/bsp/stm32f0/family.cmake
@@ -0,0 +1,113 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY f0)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m0 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32F0 CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      )
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      CFG_EXAMPLE_MSC_READONLY
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs
+        --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32F0 ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  #family_flash_jlink(${TARGET})
+endfunction()
diff --git a/hw/bsp/stm32f0/family.mk b/hw/bsp/stm32f0/family.mk
index 08e349a81..129a3b73a 100644
--- a/hw/bsp/stm32f0/family.mk
+++ b/hw/bsp/stm32f0/family.mk
@@ -6,6 +6,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0
 
 # --------------
 # Compiler Flags
@@ -15,20 +16,12 @@ CFLAGS += \
   -DCFG_TUSB_MCU=OPT_MCU_STM32F0
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0 \
-  -mfloat-abi=soft \
   -nostdlib -nostartfiles \
 
 # suppress warning caused by vendor mcu driver
-GCC_CFLAGS += -Wno-error=unused-parameter -Wno-error=cast-align
-
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m0
-IAR_ASFLAGS += --cpu cortex-m0
+CFLAGS_GCC += -Wno-error=unused-parameter -Wno-error=cast-align
 
 # ------------------------
 # All source paths should be relative to the top level.
@@ -52,5 +45,9 @@ INC += \
   $(TOP)/$(ST_CMSIS)/Include \
   $(TOP)/$(ST_HAL_DRIVER)/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
+# Startup
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s
+
+# Linker
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf
diff --git a/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..5a6b2300b
--- /dev/null
+++ b/hw/bsp/stm32f1/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32f1xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       4
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.cmake b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.cmake
new file mode 100644
index 000000000..87b8458a2
--- /dev/null
+++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.cmake
@@ -0,0 +1,13 @@
+set(MCU_VARIANT stm32f103xb)
+set(JLINK_DEVICE stm32f103c8)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F103X8_FLASH.ld)
+set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/stm32f103x8_flash.icf)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F103xB
+    HSE_VALUE=8000000U
+    CFG_EXAMPLE_VIDEO_READONLY
+    )
+endfunction()
diff --git a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk
index 159b3ecb6..6c5f34501 100644
--- a/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk
+++ b/hw/bsp/stm32f1/boards/stm32f103_bluepill/board.mk
@@ -1,12 +1,10 @@
-CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U -DCFG_EXAMPLE_VIDEO_READONLY
+MCU_VARIANT = stm32f103xb
 
-# GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F103X8_FLASH.ld
+CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U -DCFG_EXAMPLE_VIDEO_READONLY
 
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f103xb.s
-IAR_LD_FILE = $(BOARD_PATH)/stm32f103x8_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F103X8_FLASH.ld
+LD_FILE_IAR = $(BOARD_PATH)/stm32f103x8_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f103c8
diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.cmake b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.cmake
new file mode 100644
index 000000000..67a96c4d1
--- /dev/null
+++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.cmake
@@ -0,0 +1,12 @@
+set(MCU_VARIANT stm32f103xb)
+set(JLINK_DEVICE stm32f103rc)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F103XC_FLASH.ld)
+set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/stm32f103xc_flash.icf)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F103xB
+    HSE_VALUE=8000000U
+    )
+endfunction()
diff --git a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk
index efea75be7..7e95c1fe1 100644
--- a/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk
+++ b/hw/bsp/stm32f1/boards/stm32f103_mini_2/board.mk
@@ -1,12 +1,10 @@
-CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U
+MCU_VARIANT = stm32f103xb
 
-# GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F103XC_FLASH.ld
+CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U
 
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f103xb.s
-IAR_LD_FILE = $(BOARD_PATH)/stm32f103xc_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F103XC_FLASH.ld
+LD_FILE_IAR = $(BOARD_PATH)/stm32f103xc_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f103rc
diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake
new file mode 100644
index 000000000..53af35862
--- /dev/null
+++ b/hw/bsp/stm32f1/family.cmake
@@ -0,0 +1,110 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY f1)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32F1 CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      )
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs
+        --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32F1 ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  #family_flash_jlink(${TARGET})
+endfunction()
diff --git a/hw/bsp/stm32f1/family.mk b/hw/bsp/stm32f1/family.mk
index cd1d587f1..c9321c3cb 100644
--- a/hw/bsp/stm32f1/family.mk
+++ b/hw/bsp/stm32f1/family.mk
@@ -5,6 +5,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m3
 
 # --------------
 # Compiler Flags
@@ -13,18 +14,10 @@ CFLAGS += \
   -DCFG_TUSB_MCU=OPT_MCU_STM32F1
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m3 \
-  -mfloat-abi=soft \
   -nostdlib -nostartfiles \
 
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m3
-IAR_ASFLAGS += --cpu cortex-m3
-
 # ------------------------
 # All source paths should be relative to the top level.
 # ------------------------
@@ -43,11 +36,9 @@ INC += \
   $(TOP)/$(ST_CMSIS)/Include \
   $(TOP)/$(ST_HAL_DRIVER)/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3
-
-# For flash-jlink target
-JLINK_DEVICE = stm32f103c8
+# Startup
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s
 
 # flash target ROM bootloader
 flash-dfu-util: $(BUILD)/$(PROJECT).bin
diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c
index 48203b787..020f21cb1 100644
--- a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c
+++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c
@@ -203,7 +203,7 @@ uint32_t board_millis(void)
 
 void HardFault_Handler (void)
 {
-  asm("bkpt");
+  __asm("BKPT #0\n");
 }
 
 // Required by __libc_init_array in startup code if we are compiling using
diff --git a/hw/bsp/stm32f2/family.mk b/hw/bsp/stm32f2/family.mk
index 7ca378548..ce50b16ad 100644
--- a/hw/bsp/stm32f2/family.mk
+++ b/hw/bsp/stm32f2/family.mk
@@ -9,18 +9,17 @@ DEPS_SUBMODULES += \
 	$(ST_HAL_DRIVER)
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m3
 
 CFLAGS += \
+	-DCFG_TUSB_MCU=OPT_MCU_STM32F2
+
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m3 \
-  -mfloat-abi=soft \
   -nostdlib -nostartfiles \
-  -DCFG_TUSB_MCU=OPT_MCU_STM32F2
 
 # mcu driver cause following warnings
-CFLAGS += -Wno-error=sign-compare
+CFLAGS_GCC += -Wno-error=sign-compare
 
 SRC_C += \
   src/portable/synopsys/dwc2/dcd_dwc2.c \
@@ -36,6 +35,3 @@ INC += \
   $(TOP)/$(ST_CMSIS)/Include \
   $(TOP)/$(ST_HAL_DRIVER)/Inc \
   $(TOP)/$(BOARD_PATH)
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM3
diff --git a/hw/bsp/stm32f3/family.mk b/hw/bsp/stm32f3/family.mk
index f3b21d530..a740e9012 100644
--- a/hw/bsp/stm32f3/family.mk
+++ b/hw/bsp/stm32f3/family.mk
@@ -9,14 +9,10 @@ DEPS_SUBMODULES += \
 	$(ST_HAL_DRIVER)
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles \
   -DCFG_TUSB_MCU=OPT_MCU_STM32F3
 
@@ -37,6 +33,3 @@ INC += \
   $(TOP)/$(ST_CMSIS)/Include \
   $(TOP)/$(ST_HAL_DRIVER)/Inc \
   $(TOP)/$(BOARD_PATH)
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk b/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk
index 1962dd9d8..cfd1d8b3b 100644
--- a/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk
+++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F405xx
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f405xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f405xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f405xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f405xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f405rg
diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.mk b/hw/bsp/stm32f4/boards/pyboardv11/board.mk
index 0a9100e1e..4c52e004a 100644
--- a/hw/bsp/stm32f4/boards/pyboardv11/board.mk
+++ b/hw/bsp/stm32f4/boards/pyboardv11/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F405xx
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f405xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F405RGTx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f405xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f405xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f405xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f405xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f405rg
diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk
index 11f9b81aa..3285bd232 100644
--- a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F401xC
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f401xc.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F401VCTx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f401xc.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F401VCTx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f401xc.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f401xc_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f401xc.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f401xc_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f401cc
diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.mk b/hw/bsp/stm32f4/boards/stm32f407disco/board.mk
index a184804d3..4de656b0c 100644
--- a/hw/bsp/stm32f4/boards/stm32f407disco/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F407xx
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f407xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F407VGTx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f407xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F407VGTx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f407xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f407xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f407xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f407xx_flash.icf
 
 
 # For flash-jlink target
diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk
index ac15eaa5d..7af7ca47c 100644
--- a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F411xE
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F411CEUx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F411CEUx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f411xe.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f411xe_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f411xe.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f411xe_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f411ce
diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.mk b/hw/bsp/stm32f4/boards/stm32f411disco/board.mk
index c5736050c..09fa50bd3 100644
--- a/hw/bsp/stm32f4/boards/stm32f411disco/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F411xE
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F411VETx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F411VETx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f411xe.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f411xe_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f411xe.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f411xe_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f411ve
diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.mk b/hw/bsp/stm32f4/boards/stm32f412disco/board.mk
index 7dc3699e0..f767ac6c4 100644
--- a/hw/bsp/stm32f4/boards/stm32f412disco/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F412Zx
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f412zx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F412ZGTx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f412zx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F412ZGTx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f412zx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f412zx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f412zx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f412zx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f412zg
diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.mk b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.mk
index 7dc3699e0..f767ac6c4 100644
--- a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F412Zx
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f412zx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F412ZGTx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f412zx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F412ZGTx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f412zx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f412zx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f412zx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f412zx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f412zg
diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk
index e1f337a7e..2ab32b7f3 100644
--- a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk
+++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.mk
@@ -1,12 +1,12 @@
 CFLAGS += -DSTM32F439xx
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f439xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F439ZITX_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f439xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32F439ZITX_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f439xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f439xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f439xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f439xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f439zi
diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk
index 394c4a72f..38592ecb0 100644
--- a/hw/bsp/stm32f4/family.mk
+++ b/hw/bsp/stm32f4/family.mk
@@ -6,6 +6,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 # --------------
 # Compiler Flags
@@ -14,21 +15,12 @@ CFLAGS += \
   -DCFG_TUSB_MCU=OPT_MCU_STM32F4
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles
 
 # suppress warning caused by vendor mcu driver
-GCC_CFLAGS += -Wno-error=cast-align
-
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m4 --fpu VFPv4
-IAR_ASFLAGS += --cpu cortex-m4 --fpu VFPv4
+CFLAGS_GCC += -Wno-error=cast-align
 
 # -----------------
 # Sources & Include
@@ -51,8 +43,5 @@ INC += \
 	$(TOP)/$(ST_CMSIS)/Include \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
-
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..815e567dd
--- /dev/null
+++ b/hw/bsp/stm32f7/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32f7xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       4
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake b/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake
new file mode 100644
index 000000000..378e736d4
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f723xx)
+set(JLINK_DEVICE stm32f723xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F723xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk b/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk
index e1d352cc9..94dce5e84 100644
--- a/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk
+++ b/hw/bsp/stm32f7/boards/stlinkv3mini/board.mk
@@ -1,3 +1,5 @@
+MCU_VARIANT = stm32f723xx
+
 # Only OTG-HS has a connector on this board
 PORT ?= 1
 SPEED ?= high
@@ -6,13 +8,8 @@ CFLAGS += \
   -DSTM32F723xx \
   -DHSE_VALUE=25000000 \
 
-# GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f723xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32F723xE_FLASH.ld
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f723xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f723xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F723xE_FLASH.ld
 
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake
new file mode 100644
index 000000000..dd3c35b00
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f723xx)
+set(JLINK_DEVICE stm32f723ie)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F723xE_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F723xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk
index 6ddb727c7..43e8eafe1 100644
--- a/hw/bsp/stm32f7/boards/stm32f723disco/board.mk
+++ b/hw/bsp/stm32f7/boards/stm32f723disco/board.mk
@@ -1,3 +1,5 @@
+MCU_VARIANT = stm32f723xx
+
 PORT ?= 1
 SPEED ?= high
 
@@ -5,13 +7,8 @@ CFLAGS += \
   -DSTM32F723xx \
   -DHSE_VALUE=25000000 \
 
-# GCC
-GCC_LD_FILE = $(BOARD_PATH)/STM32F723xE_FLASH.ld
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f723xx.s
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f723xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f723xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F723xE_FLASH.ld
 
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h
deleted file mode 100644
index 581f0e46a..000000000
--- a/hw/bsp/stm32f7/boards/stm32f723disco/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake
new file mode 100644
index 000000000..e44c164b8
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f746xx)
+set(JLINK_DEVICE stm32f746xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F746ZGTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F746xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/board.mk b/hw/bsp/stm32f7/boards/stm32f746disco/board.mk
index ba31baa16..61c0aaa7d 100644
--- a/hw/bsp/stm32f7/boards/stm32f746disco/board.mk
+++ b/hw/bsp/stm32f7/boards/stm32f746disco/board.mk
@@ -1,3 +1,5 @@
+MCU_VARIANT = stm32f746xx
+
 PORT ?= 1
 SPEED ?= high
 
@@ -5,13 +7,8 @@ CFLAGS += \
   -DSTM32F746xx \
   -DHSE_VALUE=25000000
 
-# GCC
-GCC_LD_FILE = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f746xx.s
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f746xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f746xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld
 
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h
deleted file mode 100644
index 03dec8f0d..000000000
--- a/hw/bsp/stm32f7/boards/stm32f746disco/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake
new file mode 100644
index 000000000..dd4d4a753
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.cmake
@@ -0,0 +1,13 @@
+set(MCU_VARIANT stm32f746xx)
+set(JLINK_DEVICE stm32f746xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F746ZGTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F746xx
+    HSE_VALUE=8000000
+    BOARD_TUD_RHPORT=0
+    BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk
index e4d31040e..3683c79a5 100644
--- a/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk
+++ b/hw/bsp/stm32f7/boards/stm32f746nucleo/board.mk
@@ -1,3 +1,5 @@
+MCU_VARIANT = stm32f746xx
+
 PORT ?= 0
 SPEED ?= full
 
@@ -5,13 +7,8 @@ CFLAGS += \
   -DSTM32F746xx \
   -DHSE_VALUE=8000000
 
-# GCC
-GCC_LD_FILE = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f746xx.s
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f746xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f746xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F746ZGTx_FLASH.ld
 
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h
deleted file mode 100644
index 03dec8f0d..000000000
--- a/hw/bsp/stm32f7/boards/stm32f746nucleo/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake
new file mode 100644
index 000000000..679a6ce87
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.cmake
@@ -0,0 +1,13 @@
+set(MCU_VARIANT stm32f767xx)
+set(JLINK_DEVICE stm32f767zi)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F767ZITx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F767xx
+    HSE_VALUE=8000000
+    BOARD_TUD_RHPORT=0
+    BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk
index be5862612..059ad166a 100644
--- a/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk
+++ b/hw/bsp/stm32f7/boards/stm32f767nucleo/board.mk
@@ -1,3 +1,5 @@
+MCU_VARIANT = stm32f767xx
+
 PORT ?= 0
 SPEED ?= full
 
@@ -5,13 +7,8 @@ CFLAGS += \
   -DSTM32F767xx \
 	-DHSE_VALUE=8000000 \
 
-# GCC
-GCC_LD_FILE = $(BOARD_PATH)/STM32F767ZITx_FLASH.ld
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f767xx.s
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f767xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f767xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F767ZITx_FLASH.ld
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f767zi
diff --git a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h
deleted file mode 100644
index 03dec8f0d..000000000
--- a/hw/bsp/stm32f7/boards/stm32f767nucleo/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake b/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake
new file mode 100644
index 000000000..62a157c58
--- /dev/null
+++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.cmake
@@ -0,0 +1,14 @@
+set(MCU_VARIANT stm32f769xx)
+set(JLINK_DEVICE stm32f769xx)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F769ZITx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32F769xx
+    HSE_VALUE=25000000
+    # default to PORT 1 High Speed
+    BOARD_TUD_RHPORT=1
+    BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+    )
+endfunction()
diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/board.mk b/hw/bsp/stm32f7/boards/stm32f769disco/board.mk
index 18f59e8b2..a45af8cc0 100644
--- a/hw/bsp/stm32f7/boards/stm32f769disco/board.mk
+++ b/hw/bsp/stm32f7/boards/stm32f769disco/board.mk
@@ -1,3 +1,5 @@
+MCU_VARIANT = stm32f769xx
+
 # Only OTG-HS has a connector on this board
 PORT ?= 1
 SPEED ?= high
@@ -6,13 +8,8 @@ CFLAGS += \
   -DSTM32F769xx \
   -DHSE_VALUE=25000000 \
 
-# GCC
-GCC_LD_FILE = $(BOARD_PATH)/STM32F769ZITx_FLASH.ld
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f769xx.s
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32f769xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32f769xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32F769ZITx_FLASH.ld
 
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h
deleted file mode 100644
index 581f0e46a..000000000
--- a/hw/bsp/stm32f7/boards/stm32f769disco/stm32f7xx_hal_conf.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f7xx_hal_conf.h
-  * @author  MCD Application Team
-  * @brief   HAL configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
-  * All rights reserved.</center></h2>
-  *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F7xx_HAL_CONF_H
-#define __STM32F7xx_HAL_CONF_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* ########################## Module Selection ############################## */
-/**
-  * @brief This is the list of modules to be used in the HAL driver
-  */
-#define HAL_MODULE_ENABLED
-/* #define HAL_ADC_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED */
-/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
-/* #define HAL_CEC_MODULE_ENABLED   */
-/* #define HAL_CRC_MODULE_ENABLED   */
-/* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_DAC_MODULE_ENABLED   */
-/* #define HAL_DCMI_MODULE_ENABLED  */
-#define HAL_DMA_MODULE_ENABLED
-/* #define HAL_DMA2D_MODULE_ENABLED  */
-/* #define HAL_ETH_MODULE_ENABLED  */
-#define HAL_FLASH_MODULE_ENABLED
-/* #define HAL_NAND_MODULE_ENABLED */
-/* #define HAL_NOR_MODULE_ENABLED */
-/* #define HAL_SRAM_MODULE_ENABLED */
-/* #define HAL_SDRAM_MODULE_ENABLED */
-/* #define HAL_HASH_MODULE_ENABLED   */
-#define HAL_GPIO_MODULE_ENABLED
-/* #define HAL_I2C_MODULE_ENABLED */
-/* #define HAL_I2S_MODULE_ENABLED    */
-/* #define HAL_IWDG_MODULE_ENABLED  */
-/* #define HAL_LPTIM_MODULE_ENABLED */
-/* #define HAL_LTDC_MODULE_ENABLED  */
-#define HAL_PWR_MODULE_ENABLED
-/* #define HAL_QSPI_MODULE_ENABLED    */
-#define HAL_RCC_MODULE_ENABLED
-/* #define HAL_RNG_MODULE_ENABLED    */
-/* #define HAL_RTC_MODULE_ENABLED */
-/* #define HAL_SAI_MODULE_ENABLED    */
-/* #define HAL_SD_MODULE_ENABLED   */
-/* #define HAL_SPDIFRX_MODULE_ENABLED */
-/* #define HAL_SPI_MODULE_ENABLED    */
-/* #define HAL_TIM_MODULE_ENABLED    */
-#define HAL_UART_MODULE_ENABLED
-/* #define HAL_USART_MODULE_ENABLED  */
-/* #define HAL_IRDA_MODULE_ENABLED  */
-/* #define HAL_SMARTCARD_MODULE_ENABLED  */
-/* #define HAL_WWDG_MODULE_ENABLED   */
-#define HAL_CORTEX_MODULE_ENABLED
-/* #define HAL_PCD_MODULE_ENABLED */
-/* #define HAL_HCD_MODULE_ENABLED */
-/* #define HAL_DFSDM_MODULE_ENABLED */
-/* #define HAL_DSI_MODULE_ENABLED */
-/* #define HAL_JPEG_MODULE_ENABLED */
-/* #define HAL_MDIOS_MODULE_ENABLED */
-
-
-/* ########################## HSE/HSI Values adaptation ##################### */
-/**
-  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSE is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)25000000U) /*!< Value of the External oscillator in Hz */
-#endif /* HSE_VALUE */
-
-#if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
-#endif /* HSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief Internal High Speed oscillator (HSI) value.
-  *        This value is used by the RCC HAL module to compute the system frequency
-  *        (when HSI is used as system clock source, directly or through the PLL).
-  */
-#if !defined  (HSI_VALUE)
-  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* HSI_VALUE */
-
-/**
-  * @brief Internal Low Speed oscillator (LSI) value.
-  */
-#if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
-#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
-                                             The real value may vary depending on the variations
-                                             in voltage and temperature.  */
-/**
-  * @brief External Low Speed oscillator (LSE) value.
-  */
-#if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
-#endif /* LSE_VALUE */
-
-#if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
-#endif /* LSE_STARTUP_TIMEOUT */
-
-/**
-  * @brief External clock source for I2S peripheral
-  *        This value is used by the I2S HAL module to compute the I2S clock source
-  *        frequency, this source is inserted directly through I2S_CKIN pad.
-  */
-#if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the Internal oscillator in Hz*/
-#endif /* EXTERNAL_CLOCK_VALUE */
-
-/* Tip: To avoid modifying this file each time you need to use different HSE,
-   ===  you can define the HSE value in your toolchain compiler preprocessor. */
-
-/* ########################### System Configuration ######################### */
-/**
-  * @brief This is the HAL system configuration section
-  */
-#define  VDD_VALUE                    ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0x0FU) /*!< tick interrupt priority */
-#define  USE_RTOS                     0U
-#define  PREFETCH_ENABLE              1U
-#define  ART_ACCLERATOR_ENABLE        1U /* To enable instruction cache and prefetch */
-
-#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
-#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
-#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
-#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
-#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
-#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
-#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
-#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
-#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
-#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
-#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
-#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
-#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
-#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
-#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
-#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
-#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
-#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
-#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
-#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
-#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
-#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
-#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
-#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
-#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
-#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
-#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
-#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
-#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
-#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
-#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
-#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
-#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
-#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
-#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
-#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
-#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
-#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
-
-/* ########################## Assert Selection ############################## */
-/**
-  * @brief Uncomment the line below to expanse the "assert_param" macro in the
-  *        HAL drivers code
-  */
-/* #define USE_FULL_ASSERT    1 */
-
-/* ################## Ethernet peripheral configuration for NUCLEO 144 board ##################### */
-
-/* Section 1 : Ethernet peripheral configuration */
-
-/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
-#define MAC_ADDR0   2U
-#define MAC_ADDR1   0U
-#define MAC_ADDR2   0U
-#define MAC_ADDR3   0U
-#define MAC_ADDR4   0U
-#define MAC_ADDR5   0U
-
-/* Definition of the Ethernet driver buffers size and count */
-#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
-#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)5)       /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)5)       /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
-
-/* Section 2: PHY configuration section */
-/* LAN8742A PHY Address*/
-#define LAN8742A_PHY_ADDRESS            0x00
-/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x00000FFF)
-/* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
-
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
-
-/* Section 3: Common PHY Registers */
-
-#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
-#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
-
-#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
-#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
-#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
-#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
-#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
-#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
-#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
-#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
-#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
-#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
-
-#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
-#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
-#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
-
-/* Section 4: Extended PHY Registers */
-
-#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
-
-#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
-#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
-
-
-#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
-#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
-
-/* ################## SPI peripheral configuration ########################## */
-
-/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
-* Activated: CRC code is present inside driver
-* Deactivated: CRC code cleaned from driver
-*/
-
-#define USE_SPI_CRC                     1U
-
-/* Includes ------------------------------------------------------------------*/
-/**
-  * @brief Include module's header file
-  */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-  #include "stm32f7xx_hal_rcc.h"
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-  #include "stm32f7xx_hal_gpio.h"
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma.h"
-#endif /* HAL_DMA_MODULE_ENABLED */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-  #include "stm32f7xx_hal_cortex.h"
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-  #include "stm32f7xx_hal_adc.h"
-#endif /* HAL_ADC_MODULE_ENABLED */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-  #include "stm32f7xx_hal_can.h"
-#endif /* HAL_CAN_MODULE_ENABLED */
-
-#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
-  #include "stm32f7xx_hal_can_legacy.h"
-#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
-
-#ifdef HAL_CEC_MODULE_ENABLED
-  #include "stm32f7xx_hal_cec.h"
-#endif /* HAL_CEC_MODULE_ENABLED */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-  #include "stm32f7xx_hal_crc.h"
-#endif /* HAL_CRC_MODULE_ENABLED */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-  #include "stm32f7xx_hal_cryp.h"
-#endif /* HAL_CRYP_MODULE_ENABLED */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-  #include "stm32f7xx_hal_dma2d.h"
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-  #include "stm32f7xx_hal_dac.h"
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-  #include "stm32f7xx_hal_dcmi.h"
-#endif /* HAL_DCMI_MODULE_ENABLED */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-  #include "stm32f7xx_hal_eth.h"
-#endif /* HAL_ETH_MODULE_ENABLED */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-  #include "stm32f7xx_hal_flash.h"
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-#ifdef HAL_SRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sram.h"
-#endif /* HAL_SRAM_MODULE_ENABLED */
-
-#ifdef HAL_NOR_MODULE_ENABLED
-  #include "stm32f7xx_hal_nor.h"
-#endif /* HAL_NOR_MODULE_ENABLED */
-
-#ifdef HAL_NAND_MODULE_ENABLED
-  #include "stm32f7xx_hal_nand.h"
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-#ifdef HAL_SDRAM_MODULE_ENABLED
-  #include "stm32f7xx_hal_sdram.h"
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-
-#ifdef HAL_HASH_MODULE_ENABLED
- #include "stm32f7xx_hal_hash.h"
-#endif /* HAL_HASH_MODULE_ENABLED */
-
-#ifdef HAL_I2C_MODULE_ENABLED
- #include "stm32f7xx_hal_i2c.h"
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-#ifdef HAL_I2S_MODULE_ENABLED
- #include "stm32f7xx_hal_i2s.h"
-#endif /* HAL_I2S_MODULE_ENABLED */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_iwdg.h"
-#endif /* HAL_IWDG_MODULE_ENABLED */
-
-#ifdef HAL_LPTIM_MODULE_ENABLED
- #include "stm32f7xx_hal_lptim.h"
-#endif /* HAL_LPTIM_MODULE_ENABLED */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
- #include "stm32f7xx_hal_ltdc.h"
-#endif /* HAL_LTDC_MODULE_ENABLED */
-
-#ifdef HAL_PWR_MODULE_ENABLED
- #include "stm32f7xx_hal_pwr.h"
-#endif /* HAL_PWR_MODULE_ENABLED */
-
-#ifdef HAL_QSPI_MODULE_ENABLED
- #include "stm32f7xx_hal_qspi.h"
-#endif /* HAL_QSPI_MODULE_ENABLED */
-
-#ifdef HAL_RNG_MODULE_ENABLED
- #include "stm32f7xx_hal_rng.h"
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-#ifdef HAL_RTC_MODULE_ENABLED
- #include "stm32f7xx_hal_rtc.h"
-#endif /* HAL_RTC_MODULE_ENABLED */
-
-#ifdef HAL_SAI_MODULE_ENABLED
- #include "stm32f7xx_hal_sai.h"
-#endif /* HAL_SAI_MODULE_ENABLED */
-
-#ifdef HAL_SD_MODULE_ENABLED
- #include "stm32f7xx_hal_sd.h"
-#endif /* HAL_SD_MODULE_ENABLED */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
- #include "stm32f7xx_hal_spdifrx.h"
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-
-#ifdef HAL_SPI_MODULE_ENABLED
- #include "stm32f7xx_hal_spi.h"
-#endif /* HAL_SPI_MODULE_ENABLED */
-
-#ifdef HAL_TIM_MODULE_ENABLED
- #include "stm32f7xx_hal_tim.h"
-#endif /* HAL_TIM_MODULE_ENABLED */
-
-#ifdef HAL_UART_MODULE_ENABLED
- #include "stm32f7xx_hal_uart.h"
-#endif /* HAL_UART_MODULE_ENABLED */
-
-#ifdef HAL_USART_MODULE_ENABLED
- #include "stm32f7xx_hal_usart.h"
-#endif /* HAL_USART_MODULE_ENABLED */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
- #include "stm32f7xx_hal_irda.h"
-#endif /* HAL_IRDA_MODULE_ENABLED */
-
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
- #include "stm32f7xx_hal_smartcard.h"
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
- #include "stm32f7xx_hal_wwdg.h"
-#endif /* HAL_WWDG_MODULE_ENABLED */
-
-#ifdef HAL_PCD_MODULE_ENABLED
- #include "stm32f7xx_hal_pcd.h"
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-#ifdef HAL_HCD_MODULE_ENABLED
- #include "stm32f7xx_hal_hcd.h"
-#endif /* HAL_HCD_MODULE_ENABLED */
-
-#ifdef HAL_DFSDM_MODULE_ENABLED
- #include "stm32f7xx_hal_dfsdm.h"
-#endif /* HAL_DFSDM_MODULE_ENABLED */
-
-#ifdef HAL_DSI_MODULE_ENABLED
- #include "stm32f7xx_hal_dsi.h"
-#endif /* HAL_DSI_MODULE_ENABLED */
-
-#ifdef HAL_JPEG_MODULE_ENABLED
- #include "stm32f7xx_hal_jpeg.h"
-#endif /* HAL_JPEG_MODULE_ENABLED */
-
-#ifdef HAL_MDIOS_MODULE_ENABLED
- #include "stm32f7xx_hal_mdios.h"
-#endif /* HAL_MDIOS_MODULE_ENABLED */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *         which reports the name of the source file and the source
-  *         line number of the call that failed.
-  *         If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0U)
-#endif /* USE_FULL_ASSERT */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F7xx_HAL_CONF_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c
index 88cba2c7d..ce7e9d1bc 100644
--- a/hw/bsp/stm32f7/family.c
+++ b/hw/bsp/stm32f7/family.c
@@ -143,9 +143,19 @@ void board_init(void)
   GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
   HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
+// Suppress warning caused by mcu driver
+#ifdef __GNUC__
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wshadow"
+#endif
+
   /* Enable USB FS Clocks */
   __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
 
+#ifdef __GNUC__
+#pragma GCC diagnostic pop
+#endif
+
 #if OTG_FS_VBUS_SENSE
   /* Configure VBUS Pin */
   GPIO_InitStruct.Pin = GPIO_PIN_9;
diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake
new file mode 100644
index 000000000..48dd9c7ca
--- /dev/null
+++ b/hw/bsp/stm32f7/family.cmake
@@ -0,0 +1,115 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY f7)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m7 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32F7 CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      )
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs
+        --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32F7 ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()
diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk
index b44381586..7f37a7e40 100644
--- a/hw/bsp/stm32f7/family.mk
+++ b/hw/bsp/stm32f7/family.mk
@@ -6,6 +6,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m7
 
 # --------------
 # Compiler Flags
@@ -27,21 +28,12 @@ else
 endif
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m7 \
-  -mfloat-abi=hard \
-  -mfpu=fpv5-d16 \
   -nostdlib -nostartfiles
 
 # mcu driver cause following warnings
-GCC_CFLAGS += -Wno-error=shadow -Wno-error=cast-align
-
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m7 --fpu VFPv5_D16
-IAR_ASFLAGS += --cpu cortex-m7 --fpu VFPv5_D16
+CFLAGS_GCC += -Wno-error=cast-align
 
 # -----------------
 # Sources & Include
@@ -65,5 +57,9 @@ INC += \
 	$(TOP)/$(ST_CMSIS)/Include \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1
+# Startup
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s
+
+# Linker
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf
diff --git a/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h b/hw/bsp/stm32f7/stm32f7xx_hal_conf.h
index 581f0e46a..581f0e46a 100644
--- a/hw/bsp/stm32f7/boards/stlinkv3mini/stm32f7xx_hal_conf.h
+++ b/hw/bsp/stm32f7/stm32f7xx_hal_conf.h
diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake
index 1ebf8a700..8874b0526 100644
--- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake
+++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.cmake
@@ -1,15 +1,10 @@
-#set(MCU_VARIANT MIMXRT1011)
-set(JLINK_DEVICE STM32G0B1RE)
+set(MCU_VARIANT stm32g0b1xx)
+set(JLINK_DEVICE stm32g0b1re)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G0B1RETx_FLASH.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/stm32g0b1xx_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_stm32g0b1xx.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_stm32g0b1xx.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
     STM32G0B1xx
-    #HSE_VALUE=8000000U
     )
 endfunction()
diff --git a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.mk b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.mk
index 50f282b09..6a6078d5f 100644
--- a/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.mk
+++ b/hw/bsp/stm32g0/boards/stm32g0b1nucleo/board.mk
@@ -2,12 +2,12 @@ CFLAGS += \
 	-DSTM32G0B1xx
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32g0b1xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32G0B1RETx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32g0b1xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32G0B1RETx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32g0b1xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32g0b1xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32g0b1xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32g0b1xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32g0b1re
diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake
index 1381eaa5f..cf52a6324 100644
--- a/hw/bsp/stm32g0/family.cmake
+++ b/hw/bsp/stm32g0/family.cmake
@@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS STM32G0 CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
-
 
 #------------------------------------
 # BOARD_TARGET
@@ -34,16 +27,23 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c
       ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
       )
     target_include_directories(${BOARD_TARGET} PUBLIC
@@ -79,8 +79,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -100,7 +100,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_STM32G0)
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32G0 ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
     ${TOP}/src/portable/st/typec/typec_stm32.c
@@ -114,16 +114,3 @@ function(family_configure_example TARGET)
   family_flash_stlink(${TARGET})
   #family_flash_jlink(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/stm32g0/family.mk b/hw/bsp/stm32g0/family.mk
index 76f59fc34..6b199f21a 100644
--- a/hw/bsp/stm32g0/family.mk
+++ b/hw/bsp/stm32g0/family.mk
@@ -5,6 +5,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 # --------------
 # Compiler Flags
@@ -13,20 +14,12 @@ CFLAGS += \
   -DCFG_TUSB_MCU=OPT_MCU_STM32G0
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
-  -mfloat-abi=soft \
   -nostdlib -nostartfiles
 
 # suppress warning caused by vendor mcu driver
-GCC_CFLAGS += -Wno-error=cast-align
-
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m0
-IAR_ASFLAGS += --cpu cortex-m0
+CFLAGS_GCC += -Wno-error=cast-align
 
 # -----------------
 # Sources & Include
@@ -37,12 +30,14 @@ SRC_C += \
 	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c
 
 INC += \
 	$(TOP)/$(BOARD_PATH) \
@@ -50,8 +45,5 @@ INC += \
 	$(TOP)/$(ST_CMSIS)/Include \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
-
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake
index 9b72672ea..7a276b20d 100644
--- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake
+++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32g474xx)
 set(JLINK_DEVICE stm32g474re)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.mk b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.mk
index 75cd9d8f5..6266b3ccc 100644
--- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.mk
+++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/board.mk
@@ -1,13 +1,10 @@
+MCU_VARIANT = stm32g474xx
+
 CFLAGS += \
 	-DSTM32G474xx \
 
-# GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32g474xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32G474RETx_FLASH.ld
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32g474xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32g474xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32G474RETx_FLASH.ld
 
 # For flash-jlink target
 JLINK_DEVICE = stm32g474re
diff --git a/hw/bsp/stm32g4/boards/b_g474e_dpow1/cubemx/board.ioc b/hw/bsp/stm32g4/boards/b_g474e_dpow1/cubemx/b_g474e_dpow1.ioc
index 6ce126f84..c15011896 100644
--- a/hw/bsp/stm32g4/boards/b_g474e_dpow1/cubemx/board.ioc
+++ b/hw/bsp/stm32g4/boards/b_g474e_dpow1/cubemx/b_g474e_dpow1.ioc
@@ -111,13 +111,13 @@ ProjectManager.MainLocation=Src
 ProjectManager.NoMain=false
 ProjectManager.PreviousToolchain=
 ProjectManager.ProjectBuild=false
-ProjectManager.ProjectFileName=board.ioc
-ProjectManager.ProjectName=board
+ProjectManager.ProjectFileName=b_g474e_dpow1.ioc
+ProjectManager.ProjectName=b_g474e_dpow1
 ProjectManager.ProjectStructure=
 ProjectManager.RegisterCallBack=
 ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=Makefile
-ProjectManager.ToolChainLocation=
+ProjectManager.ToolChainLocation=Src
 ProjectManager.UnderRoot=false
 ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_USART3_UART_Init-USART3-false-HAL-true,5-MX_UCPD1_Init-UCPD1-false-LL-true
 RCC.ADC12Freq_Value=150000000
diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake
index 88cd616b3..11c76863f 100644
--- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake
+++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32g474xx)
 set(JLINK_DEVICE stm32g474re)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32G474RETx_FLASH.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk
index 2f6ec0ed6..dc46af1d1 100644
--- a/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk
+++ b/hw/bsp/stm32g4/boards/stm32g474nucleo/board.mk
@@ -1,14 +1,11 @@
+MCU_VARIANT = stm32g474xx
+
 CFLAGS += \
 	-DSTM32G474xx \
 	-DHSE_VALUE=24000000
 
-# GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32g474xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32G474RETx_FLASH.ld
-
-# IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32g474xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32g474xx_flash.icf
+# Linker
+LD_FILE_GCC = $(BOARD_PATH)/STM32G474RETx_FLASH.ld
 
 # For flash-jlink target
 JLINK_DEVICE = stm32g474re
diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake
index 45525c744..675a96c74 100644
--- a/hw/bsp/stm32g4/family.cmake
+++ b/hw/bsp/stm32g4/family.cmake
@@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS STM32G4 CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
-
 
 #------------------------------------
 # BOARD_TARGET
@@ -34,6 +27,11 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
@@ -79,8 +77,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -100,7 +98,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_STM32G4)
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32G4 ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
     ${TOP}/src/portable/st/typec/typec_stm32.c
@@ -114,16 +112,3 @@ function(family_configure_example TARGET)
   family_flash_stlink(${TARGET})
   family_flash_jlink(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/stm32g4/family.mk b/hw/bsp/stm32g4/family.mk
index a4b644245..2efe91449 100644
--- a/hw/bsp/stm32g4/family.mk
+++ b/hw/bsp/stm32g4/family.mk
@@ -6,6 +6,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 # --------------
 # Compiler Flags
@@ -14,21 +15,12 @@ CFLAGS += \
   -DCFG_TUSB_MCU=OPT_MCU_STM32G4
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles \
 
 # suppress warning caused by vendor mcu driver
-GCC_CFLAGS += -Wno-error=cast-align
-
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m4 --fpu VFPv4
-IAR_ASFLAGS += --cpu cortex-m4 --fpu VFPv4
+CFLAGS_GCC += -Wno-error=cast-align
 
 # -----------------
 # Sources & Include
@@ -53,8 +45,12 @@ INC += \
 	$(TOP)/$(ST_CMSIS)/Include \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
+# Startup
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_$(MCU_VARIANT).s
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_$(MCU_VARIANT).s
+
+# Linker
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/$(MCU_VARIANT)_flash.icf
 
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.cmake b/hw/bsp/stm32h7/boards/daisyseed/board.cmake
index 9fac51128..4811c97e8 100644
--- a/hw/bsp/stm32h7/boards/daisyseed/board.cmake
+++ b/hw/bsp/stm32h7/boards/daisyseed/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h750xx)
 set(JLINK_DEVICE stm32h750ibk6_m7)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/stm32h750ibkx_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/daisyseed/board.mk b/hw/bsp/stm32h7/boards/daisyseed/board.mk
index d53782496..da2eb4433 100644
--- a/hw/bsp/stm32h7/boards/daisyseed/board.mk
+++ b/hw/bsp/stm32h7/boards/daisyseed/board.mk
@@ -4,12 +4,12 @@ CFLAGS += -DSTM32H750xx -DCORE_CM7 -DHSE_VALUE=16000000
 PORT ?= 0
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s
-GCC_LD_FILE = $(BOARD_PATH)/stm32h750ibkx_flash.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h750xx.s
+LD_FILE_GCC = $(BOARD_PATH)/stm32h750ibkx_flash.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h750xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h750xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h750ibk6_m7
diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake
index ac1acd346..b7d133dfa 100644
--- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h723xx)
 set(JLINK_DEVICE stm32h723zg)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk
index 9cf241df8..57a316f41 100644
--- a/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk
+++ b/hw/bsp/stm32h7/boards/stm32h723nucleo/board.mk
@@ -4,12 +4,12 @@ CFLAGS += -DSTM32H723xx -DHSE_VALUE=8000000
 PORT ?= 0
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h723xx.s
-GCC_LD_FILE =  $(FAMILY_PATH)/linker/stm32h723xx_flash.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h723xx.s
+LD_FILE_GCC =  $(FAMILY_PATH)/linker/stm32h723xx_flash.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h723xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h723xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h723xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h723xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h723zg
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake
index 2cd2a4bac..a28aa87bd 100644
--- a/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h743xx)
 set(JLINK_DEVICE stm32h743xi)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h
index 666bec9a1..c46b525ca 100644
--- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h
@@ -61,8 +61,7 @@
 //--------------------------------------------------------------------+
 // RCC Clock
 //--------------------------------------------------------------------+
-static inline void board_stm32h7_clock_init(void)
-{
+static inline void board_stm32h7_clock_init(void) {
   RCC_ClkInitTypeDef RCC_ClkInitStruct = { 0 };
   RCC_OscInitTypeDef RCC_OscInitStruct = { 0 };
   RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = { 0 };
@@ -75,7 +74,7 @@ static inline void board_stm32h7_clock_init(void)
      regarding system frequency refer to product datasheet.  */
   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
 
-  while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {}
+  while ( (PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY ) {}
 
   /* Enable HSE Oscillator and activate PLL with HSE as source */
   RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
@@ -85,47 +84,49 @@ static inline void board_stm32h7_clock_init(void)
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
   RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
 
-  /* PLL1 for System Clock */
+  // PLL1 for System Clock (400Mhz)
+  // From H743 eval manual ETM can only work at 50 MHz clock by default because ETM signals
+  // are shared with other peripherals. Trace CLK = PLL1R.
   RCC_OscInitStruct.PLL.PLLM = 5;
   RCC_OscInitStruct.PLL.PLLN = 160;
-  RCC_OscInitStruct.PLL.PLLFRACN = 0;
   RCC_OscInitStruct.PLL.PLLP = 2;
-  RCC_OscInitStruct.PLL.PLLR = 2;
   RCC_OscInitStruct.PLL.PLLQ = 4;
-
+  RCC_OscInitStruct.PLL.PLLR = 6; // Trace clock is 400/6 = 66.67 MHz (larger than 50 MHz but work well)
   RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM;
+  RCC_OscInitStruct.PLL.PLLFRACN = 0;
   RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
   HAL_RCC_OscConfig(&RCC_OscInitStruct);
 
+
+  /* Select PLL as system clock source and configure bus clocks dividers */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 |
+                                RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_D3PCLK1;
+
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
+  RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
+
   /* PLL3 for USB Clock */
   PeriphClkInitStruct.PLL3.PLL3M = 25;
   PeriphClkInitStruct.PLL3.PLL3N = 336;
   PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
   PeriphClkInitStruct.PLL3.PLL3P = 2;
-  PeriphClkInitStruct.PLL3.PLL3R = 2;
   PeriphClkInitStruct.PLL3.PLL3Q = 7;
+  PeriphClkInitStruct.PLL3.PLL3R = 2;
 
   PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
   PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3;
   HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
 
-  /* Select PLL as system clock source and configure  bus clocks dividers */
-  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \
-  RCC_CLOCKTYPE_PCLK2  | RCC_CLOCKTYPE_D3PCLK1);
-
-  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
-  RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
-  RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
-  RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
-  RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
-  RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1;
-  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
-
   /*activate CSI clock mondatory for I/O Compensation Cell*/
-  __HAL_RCC_CSI_ENABLE() ;
+  __HAL_RCC_CSI_ENABLE();
 
   /* Enable SYSCFG clock mondatory for I/O Compensation Cell */
-  __HAL_RCC_SYSCFG_CLK_ENABLE() ;
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
 
   /* Enables the I/O Compensation Cell */
   HAL_EnableCompensationCell();
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.mk b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk
index 558e943b4..36882a0e5 100644
--- a/hw/bsp/stm32h7/boards/stm32h743eval/board.mk
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk
@@ -5,12 +5,12 @@ PORT ?= 1
 SPEED ?= high
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s
-GCC_LD_FILE = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s
+LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h743xi
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc
new file mode 100644
index 000000000..01458a0a9
--- /dev/null
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/cubemx/stm32h743eval.ioc
@@ -0,0 +1,1127 @@
+#MicroXplorer Configuration settings - do not modify
+CAD.formats=[]
+CAD.pinconfig=Project naming
+CAD.provider=
+File.Version=6
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=false
+Mcu.CPN=STM32H743XIH6
+Mcu.Family=STM32H7
+Mcu.IP0=CORTEX_M7
+Mcu.IP1=DEBUG
+Mcu.IP2=NVIC
+Mcu.IP3=RCC
+Mcu.IP4=SYS
+Mcu.IP5=USB_OTG_FS
+Mcu.IP6=USB_OTG_HS
+Mcu.IPNb=7
+Mcu.Name=STM32H743XIHx
+Mcu.Package=TFBGA240
+Mcu.Pin0=PI6
+Mcu.Pin1=PI5
+Mcu.Pin10=PA15 (JTDI)
+Mcu.Pin100=PC1
+Mcu.Pin101=PC2
+Mcu.Pin102=PC3
+Mcu.Pin103=PJ9
+Mcu.Pin104=PH2
+Mcu.Pin105=PA2
+Mcu.Pin106=PA1
+Mcu.Pin107=PJ0
+Mcu.Pin108=PE10
+Mcu.Pin109=PJ8
+Mcu.Pin11=PI1
+Mcu.Pin110=PJ7
+Mcu.Pin111=PJ6
+Mcu.Pin112=PH3
+Mcu.Pin113=PH4
+Mcu.Pin114=PH5
+Mcu.Pin115=PI15
+Mcu.Pin116=PJ1
+Mcu.Pin117=PF13
+Mcu.Pin118=PF14
+Mcu.Pin119=PE9
+Mcu.Pin12=PI0
+Mcu.Pin120=PE11
+Mcu.Pin121=PB10
+Mcu.Pin122=PB11
+Mcu.Pin123=PH10
+Mcu.Pin124=PH11
+Mcu.Pin125=PD15
+Mcu.Pin126=PD14
+Mcu.Pin127=PA6
+Mcu.Pin128=PA7
+Mcu.Pin129=PB2
+Mcu.Pin13=PI7
+Mcu.Pin130=PF12
+Mcu.Pin131=PF15
+Mcu.Pin132=PE12
+Mcu.Pin133=PE15
+Mcu.Pin134=PJ5
+Mcu.Pin135=PH9
+Mcu.Pin136=PH12
+Mcu.Pin137=PD11
+Mcu.Pin138=PD12
+Mcu.Pin139=PD13
+Mcu.Pin14=PE1
+Mcu.Pin140=PA0_C
+Mcu.Pin141=PA5
+Mcu.Pin142=PC4
+Mcu.Pin143=PB1
+Mcu.Pin144=PJ2
+Mcu.Pin145=PF11
+Mcu.Pin146=PG0
+Mcu.Pin147=PE8
+Mcu.Pin148=PE13
+Mcu.Pin149=PH6
+Mcu.Pin15=PB6
+Mcu.Pin150=PH8
+Mcu.Pin151=PB12
+Mcu.Pin152=PB15
+Mcu.Pin153=PD10
+Mcu.Pin154=PD9
+Mcu.Pin155=PA3
+Mcu.Pin156=PA4
+Mcu.Pin157=PC5
+Mcu.Pin158=PB0
+Mcu.Pin159=PJ3
+Mcu.Pin16=PB4 (NJTRST)
+Mcu.Pin160=PJ4
+Mcu.Pin161=PG1
+Mcu.Pin162=PE7
+Mcu.Pin163=PE14
+Mcu.Pin164=PH7
+Mcu.Pin165=PB13
+Mcu.Pin166=PB14
+Mcu.Pin167=PD8
+Mcu.Pin168=VP_SYS_VS_Systick
+Mcu.Pin17=PK4
+Mcu.Pin18=PG11
+Mcu.Pin19=PJ15
+Mcu.Pin2=PI4
+Mcu.Pin20=PD6
+Mcu.Pin21=PD3
+Mcu.Pin22=PC11
+Mcu.Pin23=PA14 (JTCK/SWCLK)
+Mcu.Pin24=PI2
+Mcu.Pin25=PH15
+Mcu.Pin26=PH14
+Mcu.Pin27=PC15-OSC32_OUT (OSC32_OUT)
+Mcu.Pin28=PC14-OSC32_IN (OSC32_IN)
+Mcu.Pin29=PE2
+Mcu.Pin3=PB5
+Mcu.Pin30=PE0
+Mcu.Pin31=PB7
+Mcu.Pin32=PB3 (JTDO/TRACESWO)
+Mcu.Pin33=PK6
+Mcu.Pin34=PK3
+Mcu.Pin35=PG12
+Mcu.Pin36=PD7
+Mcu.Pin37=PC12
+Mcu.Pin38=PI3
+Mcu.Pin39=PA13 (JTMS/SWDIO)
+Mcu.Pin4=PK5
+Mcu.Pin40=PE5
+Mcu.Pin41=PE4
+Mcu.Pin42=PE3
+Mcu.Pin43=PB9
+Mcu.Pin44=PB8
+Mcu.Pin45=PG15
+Mcu.Pin46=PK7
+Mcu.Pin47=PG14
+Mcu.Pin48=PG13
+Mcu.Pin49=PJ14
+Mcu.Pin5=PG10
+Mcu.Pin50=PJ12
+Mcu.Pin51=PD2
+Mcu.Pin52=PD0
+Mcu.Pin53=PA10
+Mcu.Pin54=PA9
+Mcu.Pin55=PH13
+Mcu.Pin56=PI9
+Mcu.Pin57=PC13
+Mcu.Pin58=PI8
+Mcu.Pin59=PE6
+Mcu.Pin6=PG9
+Mcu.Pin60=PJ13
+Mcu.Pin61=PD1
+Mcu.Pin62=PC8
+Mcu.Pin63=PC9
+Mcu.Pin64=PA8
+Mcu.Pin65=PA12
+Mcu.Pin66=PA11
+Mcu.Pin67=PI10
+Mcu.Pin68=PI11
+Mcu.Pin69=PC7
+Mcu.Pin7=PD5
+Mcu.Pin70=PC6
+Mcu.Pin71=PG8
+Mcu.Pin72=PG7
+Mcu.Pin73=PF2
+Mcu.Pin74=PF1
+Mcu.Pin75=PF0
+Mcu.Pin76=PG5
+Mcu.Pin77=PG6
+Mcu.Pin78=PI12
+Mcu.Pin79=PI13
+Mcu.Pin8=PD4
+Mcu.Pin80=PI14
+Mcu.Pin81=PF3
+Mcu.Pin82=PG4
+Mcu.Pin83=PG3
+Mcu.Pin84=PG2
+Mcu.Pin85=PK2
+Mcu.Pin86=PH1-OSC_OUT (PH1)
+Mcu.Pin87=PH0-OSC_IN (PH0)
+Mcu.Pin88=PF5
+Mcu.Pin89=PF4
+Mcu.Pin9=PC10
+Mcu.Pin90=PK0
+Mcu.Pin91=PK1
+Mcu.Pin92=PF6
+Mcu.Pin93=PF7
+Mcu.Pin94=PF8
+Mcu.Pin95=PJ11
+Mcu.Pin96=PC0
+Mcu.Pin97=PF10
+Mcu.Pin98=PF9
+Mcu.Pin99=PJ10
+Mcu.PinsNb=169
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32H743XIHx
+MxCube.Version=6.8.1
+MxDb.Version=DB.6.0.81
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true\:false\:false
+PA0_C.GPIOParameters=GPIO_Label
+PA0_C.GPIO_Label=Potentiometer
+PA0_C.Locked=true
+PA0_C.Signal=ADCx_INN1
+PA1.GPIOParameters=GPIO_Label
+PA1.GPIO_Label=RMII_REF_CLK [LAN8742A_REFCLK0]
+PA1.Locked=true
+PA1.Signal=ETH_REF_CLK
+PA10.GPIOParameters=GPIO_Label
+PA10.GPIO_Label=USB_FS1_ID
+PA10.Locked=true
+PA10.Signal=USB_OTG_FS_ID
+PA11.GPIOParameters=GPIO_Label
+PA11.GPIO_Label=USB_FS1_DM
+PA11.Locked=true
+PA11.Mode=Device_Only
+PA11.Signal=USB_OTG_FS_DM
+PA12.GPIOParameters=GPIO_Label
+PA12.GPIO_Label=USB_FS1_DP
+PA12.Locked=true
+PA12.Mode=Device_Only
+PA12.Signal=USB_OTG_FS_DP
+PA13\ (JTMS/SWDIO).Locked=true
+PA13\ (JTMS/SWDIO).Mode=Trace_Synchro_4bits_SW
+PA13\ (JTMS/SWDIO).Signal=DEBUG_JTMS-SWDIO
+PA14\ (JTCK/SWCLK).Locked=true
+PA14\ (JTCK/SWCLK).Mode=Trace_Synchro_4bits_SW
+PA14\ (JTCK/SWCLK).Signal=DEBUG_JTCK-SWCLK
+PA15\ (JTDI).GPIOParameters=GPIO_Label
+PA15\ (JTDI).GPIO_Label=TDI
+PA15\ (JTDI).Locked=true
+PA15\ (JTDI).Signal=DEBUG_JTDI
+PA2.GPIOParameters=GPIO_Label
+PA2.GPIO_Label=ETH_MDIO [LAN8742A_MDIO]
+PA2.Locked=true
+PA2.Signal=ETH_MDIO
+PA3.GPIOParameters=GPIO_Label
+PA3.GPIO_Label=ULPI_D0 [USB3320C_D0]
+PA3.Locked=true
+PA3.Mode=Device_HS
+PA3.Signal=USB_OTG_HS_ULPI_D0
+PA4.GPIOParameters=GPIO_Label
+PA4.GPIO_Label=LED3_RGB [LD3_Red]
+PA4.Locked=true
+PA4.Signal=GPIO_Output
+PA5.GPIOParameters=GPIO_Label
+PA5.GPIO_Label=ULPI_CK  [USB3320C_CLKOUT]
+PA5.Locked=true
+PA5.Mode=Device_HS
+PA5.Signal=USB_OTG_HS_ULPI_CK
+PA6.GPIOParameters=GPIO_Label
+PA6.GPIO_Label=LCD_BL_CTRL
+PA6.Locked=true
+PA6.Signal=GPIO_Output
+PA7.GPIOParameters=GPIO_Label
+PA7.GPIO_Label=RMII_CRS_DV [LAN8742A_CRS_DV]
+PA7.Locked=true
+PA7.Signal=ETH_CRS_DV
+PA8.GPIOParameters=GPIO_Label
+PA8.GPIO_Label=MCO
+PA8.Locked=true
+PA8.Signal=RCC_MCO_1
+PA9.GPIOParameters=GPIO_Label
+PA9.GPIO_Label=VBUS_FS1
+PA9.Locked=true
+PA9.Signal=USB_OTG_FS_VBUS
+PB0.GPIOParameters=GPIO_Label
+PB0.GPIO_Label=ULPI_D1 [USB3320C_D1]
+PB0.Locked=true
+PB0.Mode=Device_HS
+PB0.Signal=USB_OTG_HS_ULPI_D1
+PB1.GPIOParameters=GPIO_Label
+PB1.GPIO_Label=ULPI_D2 [USB3320C_D2]
+PB1.Locked=true
+PB1.Mode=Device_HS
+PB1.Signal=USB_OTG_HS_ULPI_D2
+PB10.GPIOParameters=GPIO_Label
+PB10.GPIO_Label=ULPI_D3 [USB3320C_D3]
+PB10.Locked=true
+PB10.Mode=Device_HS
+PB10.Signal=USB_OTG_HS_ULPI_D3
+PB11.GPIOParameters=GPIO_Label
+PB11.GPIO_Label=ULPI_D4 [USB3320C_D4]
+PB11.Locked=true
+PB11.Mode=Device_HS
+PB11.Signal=USB_OTG_HS_ULPI_D4
+PB12.GPIOParameters=GPIO_Label
+PB12.GPIO_Label=ULPI_D5 [USB3320C_D5]
+PB12.Locked=true
+PB12.Mode=Device_HS
+PB12.Signal=USB_OTG_HS_ULPI_D5
+PB13.GPIOParameters=GPIO_Label
+PB13.GPIO_Label=ULPI_D6 [USB3320C_D6]
+PB13.Locked=true
+PB13.Mode=Device_HS
+PB13.Signal=USB_OTG_HS_ULPI_D6
+PB14.GPIOParameters=GPIO_Label
+PB14.GPIO_Label=RS232_TX [ST3241EBPR_T2IN]
+PB14.Locked=true
+PB14.Signal=USART1_TX
+PB15.GPIOParameters=GPIO_Label
+PB15.GPIO_Label=RS_232RX [ST3241EBPR_R3OUT]
+PB15.Locked=true
+PB15.Signal=USART1_RX
+PB2.GPIOParameters=GPIO_Label
+PB2.GPIO_Label=QSPI_CLK [MT25TL01GHBA8ESF_CLK_1]
+PB2.Locked=true
+PB2.Signal=QUADSPI_CLK
+PB3\ (JTDO/TRACESWO).Locked=true
+PB3\ (JTDO/TRACESWO).Signal=DEBUG_JTDO-SWO
+PB4\ (NJTRST).GPIOParameters=GPIO_Label
+PB4\ (NJTRST).GPIO_Label=TRST
+PB4\ (NJTRST).Locked=true
+PB4\ (NJTRST).Signal=DEBUG_JTRST
+PB5.GPIOParameters=GPIO_Label
+PB5.GPIO_Label=ULPI_D7 [USB3320C_D7]
+PB5.Locked=true
+PB5.Mode=Device_HS
+PB5.Signal=USB_OTG_HS_ULPI_D7
+PB6.GPIOParameters=GPIO_Label
+PB6.GPIO_Label=I2C1_SCL [STM32L152CCT6_I2C_SCL]
+PB6.Locked=true
+PB6.Signal=I2C1_SCL
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=I2C1_SDA [STM32L152CCT6_I2C_SDA]
+PB7.Locked=true
+PB7.Signal=I2C1_SDA
+PB8.GPIOParameters=GPIO_Label
+PB8.GPIO_Label=SDIO1_CKIN
+PB8.Locked=true
+PB8.Signal=SDMMC1_CKIN
+PB9.GPIOParameters=GPIO_Label
+PB9.GPIO_Label=SDIO1_CDIR
+PB9.Locked=true
+PB9.Signal=SDMMC1_CDIR
+PC0.GPIOParameters=GPIO_Label
+PC0.GPIO_Label=ULPI_STP [USB3320C_STP]
+PC0.Locked=true
+PC0.Mode=Device_HS
+PC0.Signal=USB_OTG_HS_ULPI_STP
+PC1.GPIOParameters=GPIO_Label
+PC1.GPIO_Label=RMII_MDC [LAN8742A_MDC]
+PC1.Locked=true
+PC1.Signal=ETH_MDC
+PC10.GPIOParameters=GPIO_Label
+PC10.GPIO_Label=SDIO1_D2
+PC10.Locked=true
+PC10.Signal=SDMMC1_D2
+PC11.GPIOParameters=GPIO_Label
+PC11.GPIO_Label=SDIO1_D3
+PC11.Locked=true
+PC11.Signal=SDMMC1_D3
+PC12.GPIOParameters=GPIO_Label
+PC12.GPIO_Label=SDIO1_CLK
+PC12.Locked=true
+PC12.Signal=SDMMC1_CK
+PC13.GPIOParameters=GPIO_Label
+PC13.GPIO_Label=TAMPER_KEY [B1]
+PC13.Locked=true
+PC13.Signal=RTC_TAMP1
+PC14-OSC32_IN\ (OSC32_IN).Locked=true
+PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN
+PC15-OSC32_OUT\ (OSC32_OUT).Locked=true
+PC15-OSC32_OUT\ (OSC32_OUT).Signal=RCC_OSC32_OUT
+PC2.GPIOParameters=GPIO_Label
+PC2.GPIO_Label=DFSDM_CLK
+PC2.Locked=true
+PC2.Signal=S_CKOUTDFSDM1
+PC3.GPIOParameters=GPIO_Label
+PC3.GPIO_Label=DFSM_DAT1
+PC3.Locked=true
+PC3.Signal=S_DATAIN1DFSDM1
+PC4.GPIOParameters=GPIO_Label
+PC4.GPIO_Label=RMII_RXD0 [LAN8742A_RXD0]
+PC4.Locked=true
+PC4.Signal=ETH_RXD0
+PC5.GPIOParameters=GPIO_Label
+PC5.GPIO_Label=RMII_RXD1 [LAN8742A_RXD1]
+PC5.Locked=true
+PC5.Signal=ETH_RXD1
+PC6.GPIOParameters=GPIO_Label
+PC6.GPIO_Label=SDIO1_D0DIR
+PC6.Locked=true
+PC6.Signal=SDMMC1_D0DIR
+PC7.Locked=true
+PC7.Signal=DEBUG_TRGIO
+PC8.GPIOParameters=GPIO_Label
+PC8.GPIO_Label=SDIO1_D0
+PC8.Locked=true
+PC8.Signal=SDMMC1_D0
+PC9.GPIOParameters=GPIO_Label
+PC9.GPIO_Label=SDIO1_D1
+PC9.Locked=true
+PC9.Signal=SDMMC1_D1
+PD0.GPIOParameters=GPIO_Label
+PD0.GPIO_Label=D2 [IS42S32800G_DQ2]
+PD0.Locked=true
+PD0.Signal=FMC_D2_DA2
+PD1.GPIOParameters=GPIO_Label
+PD1.GPIO_Label=D3 [IS42S32800G_DQ3]
+PD1.Locked=true
+PD1.Signal=FMC_D3_DA3
+PD10.GPIOParameters=GPIO_Label
+PD10.GPIO_Label=D15 [IS42S32800G_DQ15]
+PD10.Locked=true
+PD10.Signal=FMC_D15_DA15
+PD11.GPIOParameters=GPIO_Label
+PD11.GPIO_Label=A16 [PC28F128M29EWLA_A16]
+PD11.Locked=true
+PD11.Signal=FMC_A16_CLE
+PD12.GPIOParameters=GPIO_Label
+PD12.GPIO_Label=A17 [PC28F128M29EWLA_A17]
+PD12.Locked=true
+PD12.Signal=FMC_A17_ALE
+PD13.GPIOParameters=GPIO_Label
+PD13.GPIO_Label=A18 [PC28F128M29EWLA_A18]
+PD13.Locked=true
+PD13.Signal=FMC_A18
+PD14.GPIOParameters=GPIO_Label
+PD14.GPIO_Label=D0 [IS42S32800G_DQ0]
+PD14.Locked=true
+PD14.Signal=FMC_D0_DA0
+PD15.GPIOParameters=GPIO_Label
+PD15.GPIO_Label=D1 [IS42S32800G_DQ1]
+PD15.Locked=true
+PD15.Signal=FMC_D1_DA1
+PD2.GPIOParameters=GPIO_Label
+PD2.GPIO_Label=SDIO1_CMD
+PD2.Locked=true
+PD2.Signal=SDMMC1_CMD
+PD3.GPIOParameters=GPIO_Label
+PD3.GPIO_Label=FDCAN1_STBY [MCP2562FD_STBY]
+PD3.Locked=true
+PD3.Signal=GPIO_Output
+PD4.GPIOParameters=GPIO_Label
+PD4.GPIO_Label=FMC_NOE [IS61WV102416BLL_OE]
+PD4.Locked=true
+PD4.Signal=FMC_NOE
+PD5.GPIOParameters=GPIO_Label
+PD5.GPIO_Label=FMC_NWE [IS61WV102416BLL_WE]
+PD5.Locked=true
+PD5.Signal=FMC_NWE
+PD6.GPIOParameters=GPIO_Label
+PD6.GPIO_Label=FMC_NWAIT [PC28F128M29EWLA_RB]
+PD6.Locked=true
+PD6.Signal=FMC_NWAIT
+PD7.GPIOParameters=GPIO_Label
+PD7.GPIO_Label=FMC_NE1 [PC28F128M29EWLA_E]
+PD7.Locked=true
+PD7.Signal=FMC_NE1
+PD8.GPIOParameters=GPIO_Label
+PD8.GPIO_Label=D13 [IS42S32800G_DQ13]
+PD8.Locked=true
+PD8.Signal=FMC_D13_DA13
+PD9.GPIOParameters=GPIO_Label
+PD9.GPIO_Label=D14 [IS42S32800G_DQ14]
+PD9.Locked=true
+PD9.Signal=FMC_D14_DA14
+PE0.GPIOParameters=GPIO_Label
+PE0.GPIO_Label=FMC_NBL0 [IS42S32800G_DQM0]
+PE0.Locked=true
+PE0.Signal=FMC_NBL0
+PE1.GPIOParameters=GPIO_Label
+PE1.GPIO_Label=FMC_NBL1 [IS42S32800G_DQM1]
+PE1.Locked=true
+PE1.Signal=FMC_NBL1
+PE10.GPIOParameters=GPIO_Label
+PE10.GPIO_Label=D7 [IS42S32800G_DQ7]
+PE10.Locked=true
+PE10.Signal=FMC_D7_DA7
+PE11.GPIOParameters=GPIO_Label
+PE11.GPIO_Label=D8 [IS42S32800G_DQ8]
+PE11.Locked=true
+PE11.Signal=FMC_D8_DA8
+PE12.GPIOParameters=GPIO_Label
+PE12.GPIO_Label=D9 [IS42S32800G_DQ9]
+PE12.Locked=true
+PE12.Signal=FMC_D9_DA9
+PE13.GPIOParameters=GPIO_Label
+PE13.GPIO_Label=D10 [IS42S32800G_DQ10]
+PE13.Locked=true
+PE13.Signal=FMC_D10_DA10
+PE14.GPIOParameters=GPIO_Label
+PE14.GPIO_Label=D11 [IS42S32800G_DQ11]
+PE14.Locked=true
+PE14.Signal=FMC_D11_DA11
+PE15.GPIOParameters=GPIO_Label
+PE15.GPIO_Label=D12 [IS42S32800G_DQ12]
+PE15.Locked=true
+PE15.Signal=FMC_D12_DA12
+PE2.Locked=true
+PE2.Mode=Trace_Synchro_4bits_SW
+PE2.Signal=DEBUG_TRACECLK
+PE3.Locked=true
+PE3.Mode=Trace_Synchro_4bits_SW
+PE3.Signal=DEBUG_TRACED0
+PE4.Locked=true
+PE4.Mode=Trace_Synchro_4bits_SW
+PE4.Signal=DEBUG_TRACED1
+PE5.Locked=true
+PE5.Mode=Trace_Synchro_4bits_SW
+PE5.Signal=DEBUG_TRACED2
+PE6.Locked=true
+PE6.Mode=Trace_Synchro_4bits_SW
+PE6.Signal=DEBUG_TRACED3
+PE7.GPIOParameters=GPIO_Label
+PE7.GPIO_Label=D4 [IS42S32800G_DQ4]
+PE7.Locked=true
+PE7.Signal=FMC_D4_DA4
+PE8.GPIOParameters=GPIO_Label
+PE8.GPIO_Label=D5 [IS42S32800G_DQ5]
+PE8.Locked=true
+PE8.Signal=FMC_D5_DA5
+PE9.GPIOParameters=GPIO_Label
+PE9.GPIO_Label=D6 [IS42S32800G_DQ6]
+PE9.Locked=true
+PE9.Signal=FMC_D6_DA6
+PF0.GPIOParameters=GPIO_Label
+PF0.GPIO_Label=A0 [PC28F128M29EWLA_A0]
+PF0.Locked=true
+PF0.Signal=FMC_A0
+PF1.GPIOParameters=GPIO_Label
+PF1.GPIO_Label=A1 [PC28F128M29EWLA_A1]
+PF1.Locked=true
+PF1.Signal=FMC_A1
+PF10.GPIOParameters=GPIO_Label
+PF10.GPIO_Label=LED1_RGB [LD1_Green]
+PF10.Locked=true
+PF10.Signal=GPIO_Output
+PF11.GPIOParameters=GPIO_Label
+PF11.GPIO_Label=SNDRAS [IS42S32800G_RAS]
+PF11.Locked=true
+PF11.Signal=FMC_SDNRAS
+PF12.GPIOParameters=GPIO_Label
+PF12.GPIO_Label=A6 [PC28F128M29EWLA_A6]
+PF12.Locked=true
+PF12.Signal=FMC_A6
+PF13.GPIOParameters=GPIO_Label
+PF13.GPIO_Label=A7 [PC28F128M29EWLA_A7]
+PF13.Locked=true
+PF13.Signal=FMC_A7
+PF14.GPIOParameters=GPIO_Label
+PF14.GPIO_Label=A8 [PC28F128M29EWLA_A8]
+PF14.Locked=true
+PF14.Signal=FMC_A8
+PF15.GPIOParameters=GPIO_Label
+PF15.GPIO_Label=A9 [PC28F128M29EWLA_A9]
+PF15.Locked=true
+PF15.Signal=FMC_A9
+PF2.GPIOParameters=GPIO_Label
+PF2.GPIO_Label=A2 [PC28F128M29EWLA_A2]
+PF2.Locked=true
+PF2.Signal=FMC_A2
+PF3.GPIOParameters=GPIO_Label
+PF3.GPIO_Label=A3 [PC28F128M29EWLA_A3]
+PF3.Locked=true
+PF3.Signal=FMC_A3
+PF4.GPIOParameters=GPIO_Label
+PF4.GPIO_Label=A4 [PC28F128M29EWLA_A4]
+PF4.Locked=true
+PF4.Signal=FMC_A4
+PF5.GPIOParameters=GPIO_Label
+PF5.GPIO_Label=A5 [PC28F128M29EWLA_A5]
+PF5.Locked=true
+PF5.Signal=FMC_A5
+PF6.GPIOParameters=GPIO_Label
+PF6.GPIO_Label=QSPI_BK1_IO3 [MT25TL01GHBA8ESF_DQ3]
+PF6.Locked=true
+PF6.Signal=QUADSPI_BK1_IO3
+PF7.GPIOParameters=GPIO_Label
+PF7.GPIO_Label=QSPI_BK1_IO2 [MT25TL01GHBA8ESF_DQ2]
+PF7.Locked=true
+PF7.Signal=QUADSPI_BK1_IO2
+PF8.GPIOParameters=GPIO_Label
+PF8.GPIO_Label=QSPI_BK1_IO0 [MT25TL01GHBA8ESF_DQ0]
+PF8.Locked=true
+PF8.Signal=QUADSPI_BK1_IO0
+PF9.GPIOParameters=GPIO_Label
+PF9.GPIO_Label=QSPI_BK1_IO1 [MT25TL01GHBA8ESF_DQ1]
+PF9.Locked=true
+PF9.Signal=QUADSPI_BK1_IO1
+PG0.GPIOParameters=GPIO_Label
+PG0.GPIO_Label=A10 [PC28F128M29EWLA_A10]
+PG0.Locked=true
+PG0.Signal=FMC_A10
+PG1.GPIOParameters=GPIO_Label
+PG1.GPIO_Label=A11 [PC28F128M29EWLA_A11]
+PG1.Locked=true
+PG1.Signal=FMC_A11
+PG10.GPIOParameters=GPIO_Label
+PG10.GPIO_Label=FMC_NE3 [IS61WV102416BLL_CE]
+PG10.Locked=true
+PG10.Signal=FMC_NE3
+PG11.GPIOParameters=GPIO_Label
+PG11.GPIO_Label=RMII_TX_EN [LAN8742A_TXEN]
+PG11.Locked=true
+PG11.Signal=ETH_TX_EN
+PG12.GPIOParameters=GPIO_Label
+PG12.GPIO_Label=RMII_TXD1 [LAN8742A_TXD1]
+PG12.Locked=true
+PG12.Signal=ETH_TXD1
+PG13.GPIOParameters=GPIO_Label
+PG13.GPIO_Label=RMII_TXD0 [LAN8742A_TXD0]
+PG13.Locked=true
+PG13.Signal=ETH_TXD0
+PG14.GPIOParameters=GPIO_Label
+PG14.GPIO_Label=QSPI_BK2_IO3 [MT25TL01GHBA8ESF_DQ7]
+PG14.Locked=true
+PG14.Signal=QUADSPI_BK2_IO3
+PG15.GPIOParameters=GPIO_Label
+PG15.GPIO_Label=SDNCAS [IS42S32800G_CAS]
+PG15.Locked=true
+PG15.Signal=FMC_SDNCAS
+PG2.GPIOParameters=GPIO_Label
+PG2.GPIO_Label=A12 [PC28F128M29EWLA_A12]
+PG2.Locked=true
+PG2.Signal=FMC_A12
+PG3.GPIOParameters=GPIO_Label
+PG3.GPIO_Label=A13 [PC28F128M29EWLA_A13]
+PG3.Locked=true
+PG3.Signal=FMC_A13
+PG4.Locked=true
+PG4.Signal=FMC_A14_BA0
+PG5.Locked=true
+PG5.Signal=FMC_A15_BA1
+PG6.GPIOParameters=GPIO_Label
+PG6.GPIO_Label=QSPI_BK1_NCS [MT25TL01GHBA8ESF_CS]
+PG6.Locked=true
+PG6.Signal=QUADSPI_BK1_NCS
+PG7.GPIOParameters=GPIO_Label
+PG7.GPIO_Label=SAI1_MCLKA [WM8994ECS_MCLK1]
+PG7.Locked=true
+PG7.Signal=SAI1_MCLK_A
+PG8.GPIOParameters=GPIO_Label
+PG8.GPIO_Label=SDCLK [IS42S32800G_CLK]
+PG8.Locked=true
+PG8.Signal=FMC_SDCLK
+PG9.GPIOParameters=GPIO_Label
+PG9.GPIO_Label=QSPI_BK2_IO2 [MT25TL01GHBA8ESF_DQ6]
+PG9.Locked=true
+PG9.Signal=QUADSPI_BK2_IO2
+PH0-OSC_IN\ (PH0).Locked=true
+PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
+PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
+PH1-OSC_OUT\ (PH1).Locked=true
+PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
+PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
+PH10.GPIOParameters=GPIO_Label
+PH10.GPIO_Label=D18 [IS42S32800G_DQ18]
+PH10.Locked=true
+PH10.Signal=FMC_D18
+PH11.GPIOParameters=GPIO_Label
+PH11.GPIO_Label=D19 [IS42S32800G_DQ19]
+PH11.Locked=true
+PH11.Signal=FMC_D19
+PH12.GPIOParameters=GPIO_Label
+PH12.GPIO_Label=D20 [IS42S32800G_DQ20]
+PH12.Locked=true
+PH12.Signal=FMC_D20
+PH13.GPIOParameters=GPIO_Label
+PH13.GPIO_Label=D21 [IS42S32800G_DQ21]
+PH13.Locked=true
+PH13.Signal=FMC_D21
+PH14.GPIOParameters=GPIO_Label
+PH14.GPIO_Label=D22 [IS42S32800G_DQ22]
+PH14.Locked=true
+PH14.Signal=FMC_D22
+PH15.GPIOParameters=GPIO_Label
+PH15.GPIO_Label=D23 [IS42S32800G_DQ23]
+PH15.Locked=true
+PH15.Signal=FMC_D23
+PH2.GPIOParameters=GPIO_Label
+PH2.GPIO_Label=QSPI_BK2_IO0 [MT25TL01GHBA8ESF_DQ4]
+PH2.Locked=true
+PH2.Signal=QUADSPI_BK2_IO0
+PH3.GPIOParameters=GPIO_Label
+PH3.GPIO_Label=QSPI_BK2_IO1 [MT25TL01GHBA8ESF_DQ5]
+PH3.Locked=true
+PH3.Signal=QUADSPI_BK2_IO1
+PH4.GPIOParameters=GPIO_Label
+PH4.GPIO_Label=ULPI_NXT [USB3320C_NXT]
+PH4.Locked=true
+PH4.Mode=Device_HS
+PH4.Signal=USB_OTG_HS_ULPI_NXT
+PH5.GPIOParameters=GPIO_Label
+PH5.GPIO_Label=SDNWE [IS42S32800G_WE]
+PH5.Locked=true
+PH5.Signal=FMC_SDNWE
+PH6.GPIOParameters=GPIO_Label
+PH6.GPIO_Label=SDNE1 [IS42S32800G_CS]
+PH6.Locked=true
+PH6.Signal=FMC_SDNE1
+PH7.GPIOParameters=GPIO_Label
+PH7.GPIO_Label=SDCKE1 [IS42S32800G_CKE]
+PH7.Locked=true
+PH7.Signal=FMC_SDCKE1
+PH8.GPIOParameters=GPIO_Label
+PH8.GPIO_Label=D16 [IS42S32800G_DQ16]
+PH8.Locked=true
+PH8.Signal=FMC_D16
+PH9.GPIOParameters=GPIO_Label
+PH9.GPIO_Label=D17 [IS42S32800G_DQ17]
+PH9.Locked=true
+PH9.Signal=FMC_D17
+PI0.GPIOParameters=GPIO_Label
+PI0.GPIO_Label=D24 [IS42S32800G_DQ24]
+PI0.Locked=true
+PI0.Signal=FMC_D24
+PI1.GPIOParameters=GPIO_Label
+PI1.GPIO_Label=D25 [IS42S32800G_DQ25]
+PI1.Locked=true
+PI1.Signal=FMC_D25
+PI10.GPIOParameters=GPIO_Label
+PI10.GPIO_Label=D31 [IS42S32800G_DQ31]
+PI10.Locked=true
+PI10.Signal=FMC_D31
+PI11.GPIOParameters=GPIO_Label
+PI11.GPIO_Label=ULPI_DIR [USB3320C_DIR]
+PI11.Locked=true
+PI11.Mode=Device_HS
+PI11.Signal=USB_OTG_HS_ULPI_DIR
+PI12.GPIOParameters=GPIO_Label
+PI12.GPIO_Label=LCD_HSYNC
+PI12.Locked=true
+PI12.Signal=LTDC_HSYNC
+PI13.GPIOParameters=GPIO_Label
+PI13.GPIO_Label=LCD_VSYNC
+PI13.Locked=true
+PI13.Signal=LTDC_VSYNC
+PI14.GPIOParameters=GPIO_Label
+PI14.GPIO_Label=LCD_CLK
+PI14.Locked=true
+PI14.Signal=LTDC_CLK
+PI15.GPIOParameters=GPIO_Label
+PI15.GPIO_Label=LCD_R0
+PI15.Locked=true
+PI15.Signal=LTDC_R0
+PI2.GPIOParameters=GPIO_Label
+PI2.GPIO_Label=D26 [IS42S32800G_DQ26]
+PI2.Locked=true
+PI2.Signal=FMC_D26
+PI3.GPIOParameters=GPIO_Label
+PI3.GPIO_Label=D27 [IS42S32800G_DQ27
+PI3.Locked=true
+PI3.Signal=FMC_D27
+PI4.GPIOParameters=GPIO_Label
+PI4.GPIO_Label=FMC_NBL2 [IS42S32800G_DQM2]
+PI4.Locked=true
+PI4.Signal=FMC_NBL2
+PI5.GPIOParameters=GPIO_Label
+PI5.GPIO_Label=FMC_NBL3 [IS42S32800G_DQM3]
+PI5.Locked=true
+PI5.Signal=FMC_NBL3
+PI6.GPIOParameters=GPIO_Label
+PI6.GPIO_Label=D28 [IS42S32800G_DQ28]
+PI6.Locked=true
+PI6.Signal=FMC_D28
+PI7.GPIOParameters=GPIO_Label
+PI7.GPIO_Label=D29 [IS42S32800G_DQ29]
+PI7.Locked=true
+PI7.Signal=FMC_D29
+PI8.GPIOParameters=GPIO_Label
+PI8.GPIO_Label=MFX_IRQOUT [MFX_V3_IRQOUT]
+PI8.Locked=true
+PI8.Signal=GPXTI8
+PI9.GPIOParameters=GPIO_Label
+PI9.GPIO_Label=D30 [IS42S32800G_DQ30]
+PI9.Locked=true
+PI9.Signal=FMC_D30
+PJ0.GPIOParameters=GPIO_Label
+PJ0.GPIO_Label=LCD_R1
+PJ0.Locked=true
+PJ0.Signal=LTDC_R1
+PJ1.GPIOParameters=GPIO_Label
+PJ1.GPIO_Label=LCD_R2
+PJ1.Locked=true
+PJ1.Signal=LTDC_R2
+PJ10.GPIOParameters=GPIO_Label
+PJ10.GPIO_Label=LCd_G3
+PJ10.Locked=true
+PJ10.Signal=LTDC_G3
+PJ11.GPIOParameters=GPIO_Label
+PJ11.GPIO_Label=LCD_G4
+PJ11.Locked=true
+PJ11.Signal=LTDC_G4
+PJ12.Locked=true
+PJ12.Signal=DEBUG_TRGOUT
+PJ13.GPIOParameters=GPIO_Label
+PJ13.GPIO_Label=LCD_B1
+PJ13.Locked=true
+PJ13.Signal=LTDC_B1
+PJ14.GPIOParameters=GPIO_Label
+PJ14.GPIO_Label=LCD_B2
+PJ14.Locked=true
+PJ14.Signal=LTDC_B2
+PJ15.GPIOParameters=GPIO_Label
+PJ15.GPIO_Label=LCD_B3
+PJ15.Locked=true
+PJ15.Signal=LTDC_B3
+PJ2.GPIOParameters=GPIO_Label
+PJ2.GPIO_Label=LCD_R3
+PJ2.Locked=true
+PJ2.Signal=LTDC_R3
+PJ3.GPIOParameters=GPIO_Label
+PJ3.GPIO_Label=LCD_R4
+PJ3.Locked=true
+PJ3.Signal=LTDC_R4
+PJ4.GPIOParameters=GPIO_Label
+PJ4.GPIO_Label=LCD_R5
+PJ4.Locked=true
+PJ4.Signal=LTDC_R5
+PJ5.GPIOParameters=GPIO_Label
+PJ5.GPIO_Label=LCD_R6
+PJ5.Locked=true
+PJ5.Signal=LTDC_R6
+PJ6.GPIOParameters=GPIO_Label
+PJ6.GPIO_Label=LCD_R7
+PJ6.Locked=true
+PJ6.Signal=LTDC_R7
+PJ7.Locked=true
+PJ7.Signal=DEBUG_TRGIN
+PJ8.GPIOParameters=GPIO_Label
+PJ8.GPIO_Label=LCD_G1
+PJ8.Locked=true
+PJ8.Signal=LTDC_G1
+PJ9.GPIOParameters=GPIO_Label
+PJ9.GPIO_Label=LCD_G2
+PJ9.Locked=true
+PJ9.Signal=LTDC_G2
+PK0.GPIOParameters=GPIO_Label
+PK0.GPIO_Label=LCD_G5
+PK0.Locked=true
+PK0.Signal=LTDC_G5
+PK1.GPIOParameters=GPIO_Label
+PK1.GPIO_Label=LCD_G6
+PK1.Locked=true
+PK1.Signal=LTDC_G6
+PK2.GPIOParameters=GPIO_Label
+PK2.GPIO_Label=LCD_G7
+PK2.Locked=true
+PK2.Signal=LTDC_G7
+PK3.GPIOParameters=GPIO_Label
+PK3.GPIO_Label=LCD_B4
+PK3.Locked=true
+PK3.Signal=LTDC_B4
+PK4.GPIOParameters=GPIO_Label
+PK4.GPIO_Label=LCD_B5
+PK4.Locked=true
+PK4.Signal=LTDC_B5
+PK5.GPIOParameters=GPIO_Label
+PK5.GPIO_Label=LCD_B6
+PK5.Locked=true
+PK5.Signal=LTDC_B6
+PK6.GPIOParameters=GPIO_Label
+PK6.GPIO_Label=LCD_B7
+PK6.Locked=true
+PK6.Signal=LTDC_B7
+PK7.GPIOParameters=GPIO_Label
+PK7.GPIO_Label=LCD_DE
+PK7.Locked=true
+PK7.Signal=LTDC_DE
+PinOutPanel.CurrentBGAView=Top
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=false
+ProjectManager.CustomerFirmwarePackage=
+ProjectManager.DefaultFWLocation=true
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32H743XIHx
+ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.0
+ProjectManager.FreePins=false
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=2
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=stm32h743eval.ioc
+ProjectManager.ProjectName=stm32h743eval
+ProjectManager.ProjectStructure=
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=Makefile
+ProjectManager.ToolChainLocation=Src/
+ProjectManager.UnderRoot=false
+ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true,4-MX_USB_OTG_HS_PCD_Init-USB_OTG_HS-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true
+RCC.ADCFreq_Value=50390625
+RCC.AHB12Freq_Value=200000000
+RCC.AHB4Freq_Value=200000000
+RCC.APB1Freq_Value=100000000
+RCC.APB2Freq_Value=100000000
+RCC.APB3Freq_Value=100000000
+RCC.APB4Freq_Value=100000000
+RCC.AXIClockFreq_Value=200000000
+RCC.CECFreq_Value=32000
+RCC.CKPERFreq_Value=64000000
+RCC.CortexFreq_Value=400000000
+RCC.CpuClockFreq_Value=400000000
+RCC.D1CPREFreq_Value=400000000
+RCC.D1PPRE=RCC_APB3_DIV2
+RCC.D2PPRE1=RCC_APB1_DIV2
+RCC.D2PPRE2=RCC_APB2_DIV2
+RCC.D3PPRE=RCC_APB4_DIV2
+RCC.DFSDMACLkFreq_Value=200000000
+RCC.DFSDMFreq_Value=100000000
+RCC.DIVM1=5
+RCC.DIVM3=25
+RCC.DIVN1=160
+RCC.DIVN3=336
+RCC.DIVP1Freq_Value=400000000
+RCC.DIVP2Freq_Value=50390625
+RCC.DIVP3Freq_Value=168000000
+RCC.DIVQ1=4
+RCC.DIVQ1Freq_Value=200000000
+RCC.DIVQ2Freq_Value=50390625
+RCC.DIVQ3=7
+RCC.DIVQ3Freq_Value=48000000
+RCC.DIVR1=6
+RCC.DIVR1Freq_Value=133333333.33333333
+RCC.DIVR2Freq_Value=50390625
+RCC.DIVR3Freq_Value=168000000
+RCC.EnbaleCSS=true
+RCC.FDCANFreq_Value=200000000
+RCC.FMCFreq_Value=200000000
+RCC.FamilyName=M
+RCC.HCLK3ClockFreq_Value=200000000
+RCC.HCLKFreq_Value=200000000
+RCC.HPRE=RCC_HCLK_DIV2
+RCC.HPREFreq_Value=64000000
+RCC.HRTIMFreq_Value=200000000
+RCC.HSICalibrationValue=32
+RCC.I2C123Freq_Value=100000000
+RCC.I2C4Freq_Value=100000000
+RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D1PPRE,D2PPRE1,D2PPRE2,D3PPRE,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM3,DIVN1,DIVN3,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3,DIVQ3Freq_Value,DIVR1,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,EnbaleCSS,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HPREFreq_Value,HRTIMFreq_Value,HSICalibrationValue,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL3FRACN,PLLFRACN,PLLSourceVirtual,PWR_Regulator_Voltage_Scale,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBCLockSelection,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
+RCC.LPTIM1Freq_Value=100000000
+RCC.LPTIM2Freq_Value=100000000
+RCC.LPTIM345Freq_Value=100000000
+RCC.LPUART1Freq_Value=100000000
+RCC.LTDCFreq_Value=168000000
+RCC.MCO1PinFreq_Value=64000000
+RCC.MCO2PinFreq_Value=400000000
+RCC.PLL2FRACN=0
+RCC.PLL3FRACN=0
+RCC.PLLFRACN=0
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
+RCC.PWR_Regulator_Voltage_Scale=PWR_REGULATOR_VOLTAGE_SCALE1
+RCC.QSPIFreq_Value=200000000
+RCC.RNGFreq_Value=48000000
+RCC.RTCFreq_Value=32000
+RCC.SAI1Freq_Value=200000000
+RCC.SAI23Freq_Value=200000000
+RCC.SAI4AFreq_Value=200000000
+RCC.SAI4BFreq_Value=200000000
+RCC.SDMMCFreq_Value=200000000
+RCC.SPDIFRXFreq_Value=200000000
+RCC.SPI123Freq_Value=200000000
+RCC.SPI45Freq_Value=100000000
+RCC.SPI6Freq_Value=100000000
+RCC.SWPMI1Freq_Value=100000000
+RCC.SYSCLKFreq_VALUE=400000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.Tim1OutputFreq_Value=200000000
+RCC.Tim2OutputFreq_Value=200000000
+RCC.TraceFreq_Value=133333333.33333333
+RCC.USART16Freq_Value=100000000
+RCC.USART234578Freq_Value=100000000
+RCC.USBCLockSelection=RCC_USBCLKSOURCE_PLL3
+RCC.USBFreq_Value=48000000
+RCC.VCO1OutputFreq_Value=800000000
+RCC.VCO2OutputFreq_Value=100781250
+RCC.VCO3OutputFreq_Value=336000000
+RCC.VCOInput1Freq_Value=5000000
+RCC.VCOInput2Freq_Value=781250
+RCC.VCOInput3Freq_Value=1000000
+SH.ADCx_INN1.0=ADC1_INN1
+SH.ADCx_INN1.ConfNb=1
+SH.FMC_A0.0=FMC_A0
+SH.FMC_A0.ConfNb=1
+SH.FMC_A1.0=FMC_A1
+SH.FMC_A1.ConfNb=1
+SH.FMC_A10.0=FMC_A10
+SH.FMC_A10.ConfNb=1
+SH.FMC_A11.0=FMC_A11
+SH.FMC_A11.ConfNb=1
+SH.FMC_A12.0=FMC_A12
+SH.FMC_A12.ConfNb=1
+SH.FMC_A13.0=FMC_A13
+SH.FMC_A13.ConfNb=1
+SH.FMC_A14_BA0.0=FMC_BA0
+SH.FMC_A14_BA0.1=FMC_A14
+SH.FMC_A14_BA0.ConfNb=2
+SH.FMC_A15_BA1.0=FMC_BA1
+SH.FMC_A15_BA1.1=FMC_A15
+SH.FMC_A15_BA1.ConfNb=2
+SH.FMC_A16_CLE.0=FMC_A16
+SH.FMC_A16_CLE.ConfNb=1
+SH.FMC_A17_ALE.0=FMC_A17
+SH.FMC_A17_ALE.ConfNb=1
+SH.FMC_A18.0=FMC_A18
+SH.FMC_A18.ConfNb=1
+SH.FMC_A2.0=FMC_A2
+SH.FMC_A2.ConfNb=1
+SH.FMC_A3.0=FMC_A3
+SH.FMC_A3.ConfNb=1
+SH.FMC_A4.0=FMC_A4
+SH.FMC_A4.ConfNb=1
+SH.FMC_A5.0=FMC_A5
+SH.FMC_A5.ConfNb=1
+SH.FMC_A6.0=FMC_A6
+SH.FMC_A6.ConfNb=1
+SH.FMC_A7.0=FMC_A7
+SH.FMC_A7.ConfNb=1
+SH.FMC_A8.0=FMC_A8
+SH.FMC_A8.ConfNb=1
+SH.FMC_A9.0=FMC_A9
+SH.FMC_A9.ConfNb=1
+SH.FMC_D0_DA0.0=FMC_D0
+SH.FMC_D0_DA0.ConfNb=1
+SH.FMC_D10_DA10.0=FMC_D10
+SH.FMC_D10_DA10.ConfNb=1
+SH.FMC_D11_DA11.0=FMC_D11
+SH.FMC_D11_DA11.ConfNb=1
+SH.FMC_D12_DA12.0=FMC_D12
+SH.FMC_D12_DA12.ConfNb=1
+SH.FMC_D13_DA13.0=FMC_D13
+SH.FMC_D13_DA13.ConfNb=1
+SH.FMC_D14_DA14.0=FMC_D14
+SH.FMC_D14_DA14.ConfNb=1
+SH.FMC_D15_DA15.0=FMC_D15
+SH.FMC_D15_DA15.ConfNb=1
+SH.FMC_D16.0=FMC_D16
+SH.FMC_D16.ConfNb=1
+SH.FMC_D17.0=FMC_D17
+SH.FMC_D17.ConfNb=1
+SH.FMC_D18.0=FMC_D18
+SH.FMC_D18.ConfNb=1
+SH.FMC_D19.0=FMC_D19
+SH.FMC_D19.ConfNb=1
+SH.FMC_D1_DA1.0=FMC_D1
+SH.FMC_D1_DA1.ConfNb=1
+SH.FMC_D20.0=FMC_D20
+SH.FMC_D20.ConfNb=1
+SH.FMC_D21.0=FMC_D21
+SH.FMC_D21.ConfNb=1
+SH.FMC_D22.0=FMC_D22
+SH.FMC_D22.ConfNb=1
+SH.FMC_D23.0=FMC_D23
+SH.FMC_D23.ConfNb=1
+SH.FMC_D24.0=FMC_D24
+SH.FMC_D24.ConfNb=1
+SH.FMC_D25.0=FMC_D25
+SH.FMC_D25.ConfNb=1
+SH.FMC_D26.0=FMC_D26
+SH.FMC_D26.ConfNb=1
+SH.FMC_D27.0=FMC_D27
+SH.FMC_D27.ConfNb=1
+SH.FMC_D28.0=FMC_D28
+SH.FMC_D28.ConfNb=1
+SH.FMC_D29.0=FMC_D29
+SH.FMC_D29.ConfNb=1
+SH.FMC_D2_DA2.0=FMC_D2
+SH.FMC_D2_DA2.ConfNb=1
+SH.FMC_D30.0=FMC_D30
+SH.FMC_D30.ConfNb=1
+SH.FMC_D31.0=FMC_D31
+SH.FMC_D31.ConfNb=1
+SH.FMC_D3_DA3.0=FMC_D3
+SH.FMC_D3_DA3.ConfNb=1
+SH.FMC_D4_DA4.0=FMC_D4
+SH.FMC_D4_DA4.ConfNb=1
+SH.FMC_D5_DA5.0=FMC_D5
+SH.FMC_D5_DA5.ConfNb=1
+SH.FMC_D6_DA6.0=FMC_D6
+SH.FMC_D6_DA6.ConfNb=1
+SH.FMC_D7_DA7.0=FMC_D7
+SH.FMC_D7_DA7.ConfNb=1
+SH.FMC_D8_DA8.0=FMC_D8
+SH.FMC_D8_DA8.ConfNb=1
+SH.FMC_D9_DA9.0=FMC_D9
+SH.FMC_D9_DA9.ConfNb=1
+SH.FMC_NBL0.0=FMC_NBL0
+SH.FMC_NBL0.ConfNb=1
+SH.FMC_NBL1.0=FMC_NBL1
+SH.FMC_NBL1.ConfNb=1
+SH.FMC_NBL2.0=FMC_NBL2
+SH.FMC_NBL2.ConfNb=1
+SH.FMC_NBL3.0=FMC_NBL3
+SH.FMC_NBL3.ConfNb=1
+SH.FMC_NOE.0=FMC_NOE
+SH.FMC_NOE.ConfNb=1
+SH.FMC_NWAIT.0=FMC_NWAIT
+SH.FMC_NWAIT.ConfNb=1
+SH.FMC_NWE.0=FMC_NWE
+SH.FMC_NWE.ConfNb=1
+SH.FMC_SDCLK.0=FMC_SDCLK
+SH.FMC_SDCLK.ConfNb=1
+SH.FMC_SDNCAS.0=FMC_SDNCAS
+SH.FMC_SDNCAS.ConfNb=1
+SH.FMC_SDNRAS.0=FMC_SDNRAS
+SH.FMC_SDNRAS.ConfNb=1
+SH.FMC_SDNWE.0=FMC_SDNWE
+SH.FMC_SDNWE.ConfNb=1
+SH.GPXTI8.0=GPIO_EXTI8
+SH.GPXTI8.ConfNb=1
+SH.S_CKOUTDFSDM1.0=DFSDM1_CKOUT
+SH.S_CKOUTDFSDM1.ConfNb=1
+SH.S_DATAIN1DFSDM1.0=DFSDM1_DATIN1
+SH.S_DATAIN1DFSDM1.ConfNb=1
+USB_OTG_FS.IPParameters=VirtualMode
+USB_OTG_FS.VirtualMode=Device_Only
+USB_OTG_HS.IPParameters=VirtualMode-Device_HS
+USB_OTG_HS.VirtualMode-Device_HS=Device_HS
+VP_SYS_VS_Systick.Mode=SysTick
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+board=STM32H743I-EVAL2
+boardIOC=true
diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug b/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug
new file mode 100644
index 000000000..0ab078319
--- /dev/null
+++ b/hw/bsp/stm32h7/boards/stm32h743eval/ozone/stm32h743.jdebug
@@ -0,0 +1,245 @@
+
+/*********************************************************************
+*
+*       OnProjectLoad
+*
+* Function description
+*   Project load routine. Required.
+*
+**********************************************************************
+*/
+void OnProjectLoad (void) {
+  Project.AddSvdFile ("$(InstallDir)/Config/CPU/Cortex-M7F.svd");
+  Project.AddSvdFile ("$(InstallDir)/Config/Peripherals/ARMv7M.svd");
+  Project.AddSvdFile ("./STM32H743.svd");
+
+  Project.SetDevice ("STM32H743XI");
+  Project.SetHostIF ("USB", "");
+  Project.SetTargetIF ("SWD");
+  Project.SetTIFSpeed ("50 MHz");
+
+  Project.SetTraceSource ("Trace Pins");
+  Project.SetTracePortWidth (4);
+  // timing delay for trace pins in pico seconds, default is 2 nano seconds
+  Project.SetTraceTiming (100, 100, 100, 100);
+
+  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-stm32h743eval/cdc_msc.elf");
+}
+
+/*********************************************************************
+*0
+*      TargetReset
+*
+* Function description
+*   Replaces the default target device reset routine. Optional.
+*
+* Notes
+*   This example demonstrates the usage when
+*   debugging a RAM program on a Cortex-M target device
+*
+**********************************************************************
+*/
+//void TargetReset (void) {
+//
+//  unsigned int SP;
+//  unsigned int PC;
+//  unsigned int VectorTableAddr;
+//
+//  Exec.Reset();
+//
+//  VectorTableAddr = Elf.GetBaseAddr();
+//
+//  if (VectorTableAddr != 0xFFFFFFFF) {
+//
+//    Util.Log("Resetting Program.");
+//
+//    SP = Target.ReadU32(VectorTableAddr);
+//    Target.SetReg("SP", SP);
+//
+//    PC = Target.ReadU32(VectorTableAddr + 4);
+//    Target.SetReg("PC", PC);
+//  }
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetReset
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetReset (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       DebugStart
+*
+* Function description
+*   Replaces the default debug session startup routine. Optional.
+*
+**********************************************************************
+*/
+//void DebugStart (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetConnect
+*
+* Function description
+*   Replaces the default target IF connection routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+
+void BeforeTargetConnect (void) {
+  //
+  // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
+  //
+  //Project.SetJLinkScript("./ST_STM32H743_Traceconfig.pex");
+}
+
+/*********************************************************************
+*
+*       AfterTargetConnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetConnect (void) {
+//}
+
+/*********************************************************************
+*
+*       TargetDownload
+*
+* Function description
+*   Replaces the default program download routine. Optional.
+*
+**********************************************************************
+*/
+//void TargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*       BeforeTargetDownload
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDownload (void) {
+//}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+  Util.Log("___");
+  if (VectorTableAddr == 0xFFFFFFFF) {
+    Util.Log("Project file error: failed to get program base");
+  } else {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*       BeforeTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void BeforeTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetDisconnect
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetDisconnect (void) {
+//}
+
+/*********************************************************************
+*
+*       AfterTargetHalt
+*
+* Function description
+*   Event handler routine. Optional.
+*
+**********************************************************************
+*/
+//void AfterTargetHalt (void) {
+//}
diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake
index 9d5f09be4..f1532a95f 100644
--- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h743xx)
 set(JLINK_DEVICE stm32h743xi)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk
index 0bff0940e..f641b77aa 100644
--- a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk
+++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk
@@ -4,12 +4,12 @@ CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000
 PORT ?= 0
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s
-GCC_LD_FILE = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s
+LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h743zi
diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake
index 46744df49..f1313d54e 100644
--- a/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake
+++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.cmake
@@ -4,9 +4,6 @@ set(JLINK_DEVICE stm32h745xi_m7)
 set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_CM7.ld)
 set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_CM7.icf)
 
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
-
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
     STM32H745xx
diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk
index 86347ade7..9c3615f05 100644
--- a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk
+++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk
@@ -7,12 +7,12 @@ CFLAGS += -DSTM32H745xx -DCORE_CM7 -DHSE_VALUE=25000000
 PORT ?= 0
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s
-GCC_LD_FILE = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h745xx_flash_CM7.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s
+LD_FILE_GCC = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h745xx_flash_CM7.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h745xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h745xx_flash_CM7.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h745xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h745xx_flash_CM7.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h745xi_m7
diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake
index 033d3a9f2..83c8d4833 100644
--- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake
+++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.cmake
@@ -2,10 +2,6 @@ set(MCU_VARIANT stm32h743xx)
 set(JLINK_DEVICE stm32h743xi)
 
 set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/${MCU_VARIANT}_flash.ld)
-set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
-
-set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
-set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
 
 function(update_board TARGET)
   target_compile_definitions(${TARGET} PUBLIC
diff --git a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk
index 9997faff9..cea4bfacb 100644
--- a/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk
+++ b/hw/bsp/stm32h7/boards/waveshare_openh743i/board.mk
@@ -10,12 +10,12 @@ SRC_C += \
   $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_tim_ex.c
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s
-GCC_LD_FILE = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s
+LD_FILE_GCC = $(FAMILY_PATH)/linker/stm32h743xx_flash.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32h743xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32h743xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h743ii
diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c
index 35b2cd55b..eb4ac841e 100644
--- a/hw/bsp/stm32h7/family.c
+++ b/hw/bsp/stm32h7/family.c
@@ -56,6 +56,30 @@ void OTG_HS_IRQHandler(void)
 
 UART_HandleTypeDef UartHandle;
 
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
+
+#ifdef TRACE_ETM
+void trace_etm_init(void) {
+  // H7 trace pin is PE2 to PE6
+  // __HAL_RCC_GPIOE_CLK_ENABLE();
+
+  GPIO_InitTypeDef  gpio_init;
+  gpio_init.Pin       = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6;
+  gpio_init.Mode      = GPIO_MODE_AF_PP;
+  gpio_init.Pull      = GPIO_PULLUP;
+  gpio_init.Speed     = GPIO_SPEED_FREQ_VERY_HIGH;
+  gpio_init.Alternate = GPIO_AF0_TRACE;
+  HAL_GPIO_Init(GPIOE, &gpio_init);
+
+  // Enable trace clk, also in D1 and D3 domain
+  DBGMCU->CR |= DBGMCU_CR_DBG_TRACECKEN | DBGMCU_CR_DBG_CKD1EN | DBGMCU_CR_DBG_CKD3EN;
+}
+#else
+  #define trace_etm_init()
+#endif
+
 void board_init(void)
 {
   board_stm32h7_clock_init();
@@ -74,6 +98,8 @@ void board_init(void)
 #endif
   __HAL_RCC_GPIOJ_CLK_ENABLE();
 
+  trace_etm_init();
+
   // Enable UART Clock
   UART_CLK_EN();
 
diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake
index f04a768a5..c08857a50 100644
--- a/hw/bsp/stm32h7/family.cmake
+++ b/hw/bsp/stm32h7/family.cmake
@@ -20,13 +20,6 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
 set(FAMILY_MCUS STM32H7 CACHE INTERNAL "")
 
-# enable LTO if supported
-include(CheckIPOSupported)
-check_ipo_supported(RESULT IPO_SUPPORTED)
-if (IPO_SUPPORTED)
-  set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif ()
-
 
 #------------------------------------
 # BOARD_TARGET
@@ -34,6 +27,14 @@ endif ()
 # only need to be built ONCE for all examples
 function(add_board_target BOARD_TARGET)
   if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+
+    if(NOT DEFINED LD_FILE_IAR)
+      set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+    endif()
+
     add_library(${BOARD_TARGET} STATIC
       ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
       ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
@@ -81,8 +82,8 @@ endfunction()
 #------------------------------------
 # Functions
 #------------------------------------
-function(family_configure_example TARGET)
-  family_configure_common(${TARGET})
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
 
   # Board target
   add_board_target(board_${BOARD})
@@ -102,7 +103,7 @@ function(family_configure_example TARGET)
     )
 
   # Add TinyUSB target and port source
-  family_add_tinyusb(${TARGET} OPT_MCU_STM32H7)
+  family_add_tinyusb(${TARGET} OPT_MCU_STM32H7 ${RTOS})
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
     )
@@ -115,16 +116,3 @@ function(family_configure_example TARGET)
   family_flash_stlink(${TARGET})
   family_flash_jlink(${TARGET})
 endfunction()
-
-
-function(family_configure_device_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_host_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
-
-function(family_configure_dual_usb_example TARGET)
-  family_configure_example(${TARGET})
-endfunction()
diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk
index c11240207..a1ff26d0b 100644
--- a/hw/bsp/stm32h7/family.mk
+++ b/hw/bsp/stm32h7/family.mk
@@ -6,6 +6,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m7
 
 # --------------
 # Compiler Flags
@@ -27,21 +28,12 @@ else
 endif
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m7 \
-  -mfloat-abi=hard \
-  -mfpu=fpv5-d16 \
   -nostdlib -nostartfiles
 
 # suppress warning caused by vendor mcu driver
-GCC_CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=unused-parameter
-
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m7 --fpu VFPv5_D16
-IAR_ASFLAGS += --cpu cortex-m7 --fpu VFPv5_D16
+CFLAGS_GCC += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=unused-parameter
 
 # -----------------
 # Sources & Include
@@ -66,6 +58,3 @@ INC += \
 	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
 	$(TOP)/$(ST_CMSIS)/Include \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM7/r0p1
diff --git a/hw/bsp/stm32l0/family.mk b/hw/bsp/stm32l0/family.mk
index f069ae8f0..43f567b50 100644
--- a/hw/bsp/stm32l0/family.mk
+++ b/hw/bsp/stm32l0/family.mk
@@ -8,13 +8,10 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m0plus
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m0plus \
-  -mfloat-abi=soft \
   -nostdlib -nostartfiles \
   -DCFG_EXAMPLE_MSC_READONLY \
   -DCFG_EXAMPLE_VIDEO_READONLY \
@@ -42,6 +39,3 @@ INC += \
   $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
   $(TOP)/$(ST_CMSIS)/Include \
   $(TOP)/$(ST_HAL_DRIVER)/Inc
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM0
diff --git a/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h
new file mode 100644
index 000000000..e6a735ddd
--- /dev/null
+++ b/hw/bsp/stm32l4/FreeRTOSConfig/FreeRTOSConfig.h
@@ -0,0 +1,165 @@
+/*
+ * FreeRTOS Kernel V10.0.0
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software. If you wish to use our Amazon
+ * FreeRTOS name, please do so in a fair use way that does not cause confusion.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+// skip if included from IAR assembler
+#ifndef __IASMARM__
+  #include "stm32l4xx.h"
+#endif
+
+/* Cortex M23/M33 port configuration. */
+#define configENABLE_MPU                        0
+#define configENABLE_FPU                        1
+#define configENABLE_TRUSTZONE                  0
+#define configMINIMAL_SECURE_STACK_SIZE         (1024)
+
+#define configUSE_PREEMPTION                    1
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
+#define configCPU_CLOCK_HZ                      SystemCoreClock
+#define configTICK_RATE_HZ                      ( 1000 )
+#define configMAX_PRIORITIES                    ( 5 )
+#define configMINIMAL_STACK_SIZE                ( 128 )
+#define configTOTAL_HEAP_SIZE                   ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 )
+#define configMAX_TASK_NAME_LEN                 16
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configQUEUE_REGISTRY_SIZE               2
+#define configUSE_QUEUE_SETS                    0
+#define configUSE_TIME_SLICING                  0
+#define configUSE_NEWLIB_REENTRANT              0
+#define configENABLE_BACKWARD_COMPATIBILITY     1
+#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP   0
+
+#define configSUPPORT_STATIC_ALLOCATION         0
+#define configSUPPORT_DYNAMIC_ALLOCATION        1
+
+/* Hook function related definitions. */
+#define configUSE_IDLE_HOOK                    0
+#define configUSE_TICK_HOOK                    0
+#define configUSE_MALLOC_FAILED_HOOK           0 // cause nested extern warning
+#define configCHECK_FOR_STACK_OVERFLOW         2
+
+/* Run time and task stats gathering related definitions. */
+#define configGENERATE_RUN_TIME_STATS          0
+#define configRECORD_STACK_HIGH_ADDRESS        1
+#define configUSE_TRACE_FACILITY               1 // legacy trace
+#define configUSE_STATS_FORMATTING_FUNCTIONS   0
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                  0
+#define configMAX_CO_ROUTINE_PRIORITIES        2
+
+/* Software timer related definitions. */
+#define configUSE_TIMERS                       1
+#define configTIMER_TASK_PRIORITY              (configMAX_PRIORITIES-2)
+#define configTIMER_QUEUE_LENGTH               32
+#define configTIMER_TASK_STACK_DEPTH           configMINIMAL_STACK_SIZE
+
+/* Optional functions - most linkers will remove unused functions anyway. */
+#define INCLUDE_vTaskPrioritySet               0
+#define INCLUDE_uxTaskPriorityGet              0
+#define INCLUDE_vTaskDelete                    0
+#define INCLUDE_vTaskSuspend                   1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY
+#define INCLUDE_xResumeFromISR                 0
+#define INCLUDE_vTaskDelayUntil                1
+#define INCLUDE_vTaskDelay                     1
+#define INCLUDE_xTaskGetSchedulerState         0
+#define INCLUDE_xTaskGetCurrentTaskHandle      1
+#define INCLUDE_uxTaskGetStackHighWaterMark    0
+#define INCLUDE_xTaskGetIdleTaskHandle         0
+#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
+#define INCLUDE_pcTaskGetTaskName              0
+#define INCLUDE_eTaskGetState                  0
+#define INCLUDE_xEventGroupSetBitFromISR       0
+#define INCLUDE_xTimerPendFunctionCall         0
+
+/* Define to trap errors during development. */
+// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7
+#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__)
+  #define configASSERT(_exp) \
+    do {\
+      if ( !(_exp) ) { \
+        volatile uint32_t* ARM_CM_DHCSR =  ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \
+        if ( (*ARM_CM_DHCSR) & 1UL ) {  /* Only halt mcu if debugger is attached */ \
+          taskDISABLE_INTERRUPTS(); \
+           __asm("BKPT #0\n"); \
+        }\
+      }\
+    } while(0)
+#else
+  #define configASSERT( x )
+#endif
+
+/* FreeRTOS hooks to NVIC vectors */
+#define xPortPendSVHandler    PendSV_Handler
+#define xPortSysTickHandler   SysTick_Handler
+#define vPortSVCHandler       SVC_Handler
+
+//--------------------------------------------------------------------+
+// Interrupt nesting behavior configuration.
+//--------------------------------------------------------------------+
+
+// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header
+#define configPRIO_BITS       4
+
+/* The lowest interrupt priority that can be used in a call to a "set priority" function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY			  ((1<<configPRIO_BITS) - 1)
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY	2
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY 		          ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY 	        ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+#endif
diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.cmake
new file mode 100644
index 000000000..e979a7378
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.cmake
@@ -0,0 +1,10 @@
+set(MCU_VARIANT stm32l412xx)
+set(JLINK_DEVICE stm32l412kb)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L412KBUx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L412xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.mk b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.mk
index 854397fc8..87b333500 100644
--- a/hw/bsp/stm32l4/boards/stm32l412nucleo/board.mk
+++ b/hw/bsp/stm32l4/boards/stm32l412nucleo/board.mk
@@ -2,12 +2,12 @@ CFLAGS += \
   -DSTM32L412xx \
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l412xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32L412KBUx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l412xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32L412KBUx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l412xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l412xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l412xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l412xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32l412kb
diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.cmake b/hw/bsp/stm32l4/boards/stm32l476disco/board.cmake
new file mode 100644
index 000000000..4ade0a5c9
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.cmake
@@ -0,0 +1,10 @@
+set(MCU_VARIANT stm32l476xx)
+set(JLINK_DEVICE stm32l476vg)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L476VGTx_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L476xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/boards/stm32l476disco/board.mk b/hw/bsp/stm32l4/boards/stm32l476disco/board.mk
index 125f1f106..3ba9ab444 100644
--- a/hw/bsp/stm32l4/boards/stm32l476disco/board.mk
+++ b/hw/bsp/stm32l4/boards/stm32l476disco/board.mk
@@ -2,12 +2,12 @@ CFLAGS += \
   -DSTM32L476xx \
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l476xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32L476VGTx_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l476xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32L476VGTx_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l476xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l476xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l476xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l476xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32l476vg
diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.cmake
new file mode 100644
index 000000000..ead241e32
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.cmake
@@ -0,0 +1,10 @@
+set(MCU_VARIANT stm32l4p5xx)
+set(JLINK_DEVICE stm32l4p5zg)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L4P5ZGTX_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L4P5xx
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.mk b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.mk
index 11edcd9a8..84f831878 100644
--- a/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.mk
+++ b/hw/bsp/stm32l4/boards/stm32l4p5nucleo/board.mk
@@ -2,12 +2,12 @@ CFLAGS += \
   -DSTM32L4P5xx \
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l4p5xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32L4P5ZGTX_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l4p5xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32L4P5ZGTX_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l4p5xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l4p5xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l4p5xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l4p5xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32l4p5zg
diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.cmake b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.cmake
new file mode 100644
index 000000000..d4bbe6a94
--- /dev/null
+++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.cmake
@@ -0,0 +1,11 @@
+set(MCU_VARIANT stm32l4r5xx)
+set(JLINK_DEVICE stm32l4r5zi)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32L4RXxI_FLASH.ld)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    STM32L4R5xx
+    HSE_VALUE=8000000
+    )
+endfunction()
diff --git a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.mk b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.mk
index 6dca88a8b..ad5bfba38 100644
--- a/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.mk
+++ b/hw/bsp/stm32l4/boards/stm32l4r5nucleo/board.mk
@@ -3,12 +3,12 @@ CFLAGS += \
   -DSTM32L4R5xx \
 
 # GCC
-GCC_SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l4r5xx.s
-GCC_LD_FILE = $(BOARD_PATH)/STM32L4RXxI_FLASH.ld
+SRC_S_GCC += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32l4r5xx.s
+LD_FILE_GCC = $(BOARD_PATH)/STM32L4RXxI_FLASH.ld
 
 # IAR
-IAR_SRC_S += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l4r5xx.s
-IAR_LD_FILE = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l4r5xx_flash.icf
+SRC_S_IAR += $(ST_CMSIS)/Source/Templates/iar/startup_stm32l4r5xx.s
+LD_FILE_IAR = $(ST_CMSIS)/Source/Templates/iar/linker/stm32l4r5xx_flash.icf
 
 # For flash-jlink target
 JLINK_DEVICE = stm32l4r5zi
diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake
new file mode 100644
index 000000000..87f87004b
--- /dev/null
+++ b/hw/bsp/stm32l4/family.cmake
@@ -0,0 +1,116 @@
+include_guard()
+
+if (NOT BOARD)
+  message(FATAL_ERROR "BOARD not specified")
+endif ()
+
+set(ST_FAMILY l4)
+set(ST_PREFIX stm32${ST_FAMILY}xx)
+
+set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver)
+set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY})
+set(CMSIS_5 ${TOP}/lib/CMSIS_5)
+
+# include board specific
+include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
+
+# toolchain set up
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
+
+set(FAMILY_MCUS STM32L4 CACHE INTERNAL "")
+
+
+#------------------------------------
+# BOARD_TARGET
+#------------------------------------
+# only need to be built ONCE for all examples
+function(add_board_target BOARD_TARGET)
+  if (NOT TARGET ${BOARD_TARGET})
+    # Startup & Linker script
+    set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s)
+    set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s)
+    set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf)
+
+    add_library(${BOARD_TARGET} STATIC
+      ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c
+      ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c
+      ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}}
+      )
+    target_include_directories(${BOARD_TARGET} PUBLIC
+      ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+      ${CMSIS_5}/CMSIS/Core/Include
+      ${ST_CMSIS}/Include
+      ${ST_HAL_DRIVER}/Inc
+      )
+    target_compile_options(${BOARD_TARGET} PUBLIC
+      )
+    target_compile_definitions(${BOARD_TARGET} PUBLIC
+      )
+
+    update_board(${BOARD_TARGET})
+
+    if (CMAKE_C_COMPILER_ID STREQUAL "GNU")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--script=${LD_FILE_GNU}"
+        -nostartfiles
+        # nanolib
+        --specs=nosys.specs
+        --specs=nano.specs
+        )
+    elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR")
+      target_link_options(${BOARD_TARGET} PUBLIC
+        "LINKER:--config=${LD_FILE_IAR}"
+        )
+    endif ()
+  endif ()
+endfunction()
+
+
+#------------------------------------
+# Functions
+#------------------------------------
+function(family_configure_example TARGET RTOS)
+  family_configure_common(${TARGET} ${RTOS})
+
+  # Board target
+  add_board_target(board_${BOARD})
+
+  #---------- Port Specific ----------
+  # These files are built for each example since it depends on example's tusb_config.h
+  target_sources(${TARGET} PUBLIC
+    # BSP
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c
+    )
+  target_include_directories(${TARGET} PUBLIC
+    # family, hw, board
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../
+    ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
+    )
+
+  # Add TinyUSB target and port source
+  family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS} ${RTOS})
+  target_sources(${TARGET}-tinyusb PUBLIC
+    ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c
+    ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c
+    )
+  target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
+
+  # Link dependencies
+  target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb)
+
+  # Flashing
+  family_flash_stlink(${TARGET})
+  family_flash_jlink(${TARGET})
+endfunction()
diff --git a/hw/bsp/stm32l4/family.mk b/hw/bsp/stm32l4/family.mk
index 0e84d1af0..c16040887 100644
--- a/hw/bsp/stm32l4/family.mk
+++ b/hw/bsp/stm32l4/family.mk
@@ -5,6 +5,7 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 # --------------
 # Compiler Flags
@@ -13,21 +14,12 @@ CFLAGS += \
   -DCFG_TUSB_MCU=OPT_MCU_STM32L4
 
 # GCC Flags
-GCC_CFLAGS += \
+CFLAGS_GCC += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles
 
 # suppress warning caused by vendor mcu driver
-GCC_CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align
-
-# IAR Flags
-IAR_CFLAGS += --cpu cortex-m4 --fpu VFPv4
-IAR_ASFLAGS += --cpu cortex-m4 --fpu VFPv4
+CFLAGS_GCC += -Wno-error=maybe-uninitialized -Wno-error=cast-align
 
 # -----------------
 # Sources & Include
@@ -40,11 +32,11 @@ SRC_C += \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_dma.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
-	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
 	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart_ex.c
 
@@ -54,8 +46,5 @@ INC += \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc \
 	$(TOP)/$(BOARD_PATH)
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
-
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32u5/family.mk b/hw/bsp/stm32u5/family.mk
index e1c496dee..9174fe96a 100644
--- a/hw/bsp/stm32u5/family.mk
+++ b/hw/bsp/stm32u5/family.mk
@@ -5,21 +5,16 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m33
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m33 \
-  -mfloat-abi=hard \
-  -mfpu=fpv5-sp-d16 \
   -nostdlib -nostartfiles \
   -DCFG_TUSB_MCU=OPT_MCU_STM32U5
 
 # suppress warning caused by vendor mcu driver
 CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align -Wno-error=undef -Wno-error=unused-parameter
 
-#src/portable/st/synopsys/dcd_synopsys.c
 SRC_C += \
 	src/portable/synopsys/dwc2/dcd_dwc2.c \
 	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
@@ -38,8 +33,5 @@ INC += \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc \
 	$(TOP)/$(BOARD_PATH)
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM33_NTZ/non_secure
-
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk
index 97210889c..bc3afcaff 100644
--- a/hw/bsp/stm32wb/family.mk
+++ b/hw/bsp/stm32wb/family.mk
@@ -6,14 +6,10 @@ ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
 ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles \
   -DCFG_TUSB_MCU=OPT_MCU_STM32WB
 
@@ -37,8 +33,5 @@ INC += \
 	$(TOP)/$(ST_CMSIS)/Include \
 	$(TOP)/$(ST_HAL_DRIVER)/Inc
 
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
-
 # flash target using on-board stlink
 flash: flash-stlink
diff --git a/hw/bsp/tm4c123/family.mk b/hw/bsp/tm4c123/family.mk
index 021b47fd3..608c530bb 100644
--- a/hw/bsp/tm4c123/family.mk
+++ b/hw/bsp/tm4c123/family.mk
@@ -1,14 +1,10 @@
 DEPS_SUBMODULES += hw/mcu/ti
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -DCFG_TUSB_MCU=OPT_MCU_TM4C123 \
   -uvectors \
   -DTM4C123GH6PM
@@ -31,6 +27,3 @@ SRC_C += \
 	src/portable/mentor/musb/hcd_musb.c \
 	$(MCU_DIR)/Source/system_TM4C123.c \
 	$(MCU_DIR)/Source/GCC/tm4c123_startup.c
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
diff --git a/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk b/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk
index 371adff91..2b8f7bc57 100644
--- a/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk
+++ b/hw/bsp/xmc4000/boards/xmc4500_relax/board.mk
@@ -3,7 +3,7 @@ CFLAGS += \
   -DXMC4500_F100x1024 \
 
 # mcu driver cause following warnings
-CFLAGS += -Wno-error=stringop-overread
+CFLAGS += -Wno-stringop-overread
 
 LD_FILE = $(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Source/TOOLCHAIN_GCC_ARM/XMC4500x1024.ld
 
diff --git a/hw/bsp/xmc4000/boards/xmc4700_relax/board.h b/hw/bsp/xmc4000/boards/xmc4700_relax/board.h
new file mode 100644
index 000000000..aa12fde3b
--- /dev/null
+++ b/hw/bsp/xmc4000/boards/xmc4700_relax/board.h
@@ -0,0 +1,81 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define LED_PIN               P5_9
+#define LED_STATE_ON          1
+
+#define BUTTON_PIN            P15_13
+#define BUTTON_STATE_ACTIVE   0
+
+#define UART_DEV              XMC_UART0_CH0
+#define UART_TX_PIN           P1_5
+#define UART_TX_PIN_AF        P1_5_AF_U0C0_DOUT0
+#define UART_RX_PIN           P1_4
+#define UART_RX_INPUT         USIC0_C0_DX0_P1_4
+
+static inline void board_clock_init(void)
+{
+  /* Clock configuration */
+  /* fPLL = 144MHz */
+  /* fSYS = 144MHz */
+  /* fUSB = 48MHz */
+  const XMC_SCU_CLOCK_CONFIG_t clock_config =
+  {
+    .syspll_config.p_div  = 2,
+    .syspll_config.n_div  = 48,
+    .syspll_config.k_div  = 1,
+    .syspll_config.mode   = XMC_SCU_CLOCK_SYSPLL_MODE_NORMAL,
+    .syspll_config.clksrc = XMC_SCU_CLOCK_SYSPLLCLKSRC_OSCHP,
+    .enable_oschp         = true,
+    .calibration_mode     = XMC_SCU_CLOCK_FOFI_CALIBRATION_MODE_FACTORY,
+    .fsys_clksrc          = XMC_SCU_CLOCK_SYSCLKSRC_PLL,
+    .fsys_clkdiv          = 2,
+    .fcpu_clkdiv          = 1,
+    .fccu_clkdiv          = 1,
+    .fperipheral_clkdiv   = 1
+  };
+
+  /* Setup settings for USB clock */
+  XMC_SCU_CLOCK_Init(&clock_config);
+
+  XMC_SCU_CLOCK_SetUsbClockDivider(6);
+  XMC_SCU_CLOCK_SetUsbClockSource(XMC_SCU_CLOCK_USBCLKSRC_SYSPLL);
+  XMC_SCU_CLOCK_EnableClock(XMC_SCU_CLOCK_USB);
+}
+
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */
diff --git a/hw/bsp/xmc4000/boards/xmc4700_relax/board.mk b/hw/bsp/xmc4000/boards/xmc4700_relax/board.mk
new file mode 100644
index 000000000..28fadf8f4
--- /dev/null
+++ b/hw/bsp/xmc4000/boards/xmc4700_relax/board.mk
@@ -0,0 +1,12 @@
+MCU_VARIANT = XMC4700
+CFLAGS += \
+  -DXMC4700_F144x2048 \
+
+# mcu driver cause following warnings
+CFLAGS += -Wno-stringop-overread
+
+LD_FILE = $(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Source/TOOLCHAIN_GCC_ARM/XMC4700x2048.ld
+
+JLINK_DEVICE = XMC4700-2048
+
+flash: flash-jlink
diff --git a/hw/bsp/xmc4000/family.c b/hw/bsp/xmc4000/family.c
index bf6684736..146bef373 100644
--- a/hw/bsp/xmc4000/family.c
+++ b/hw/bsp/xmc4000/family.c
@@ -26,6 +26,7 @@
 
 #include "xmc_gpio.h"
 #include "xmc_scu.h"
+#include "xmc_uart.h"
 
 #include "bsp/board.h"
 #include "board.h"
@@ -45,17 +46,31 @@ void board_init(void)
   SystemCoreClockUpdate();
 
   // LED
-  XMC_GPIO_CONFIG_t led_cfg;
+  XMC_GPIO_CONFIG_t led_cfg = {0};
   led_cfg.mode = XMC_GPIO_MODE_OUTPUT_PUSH_PULL;
   led_cfg.output_level = XMC_GPIO_OUTPUT_LEVEL_HIGH;
   led_cfg.output_strength = XMC_GPIO_OUTPUT_STRENGTH_MEDIUM;
   XMC_GPIO_Init(LED_PIN, &led_cfg);
 
   // Button
-  XMC_GPIO_CONFIG_t button_cfg;
+  XMC_GPIO_CONFIG_t button_cfg = {0};
   button_cfg.mode = XMC_GPIO_MODE_INPUT_TRISTATE;
   XMC_GPIO_Init(BUTTON_PIN, &button_cfg);
 
+#ifdef UART_DEV
+  XMC_UART_CH_CONFIG_t uart_cfg = {0};
+  uart_cfg.baudrate = CFG_BOARD_UART_BAUDRATE;
+  uart_cfg.data_bits = 8;
+  uart_cfg.stop_bits = 1;
+  XMC_UART_CH_Init(UART_DEV, &uart_cfg);
+
+  XMC_GPIO_SetMode(UART_RX_PIN, XMC_GPIO_MODE_INPUT_PULL_UP);
+  XMC_UART_CH_SetInputSource(UART_DEV, XMC_UART_CH_INPUT_RXD, UART_RX_INPUT);
+
+  XMC_UART_CH_Start(UART_DEV);
+  XMC_GPIO_SetMode(UART_TX_PIN, (XMC_GPIO_MODE_t)(XMC_GPIO_MODE_OUTPUT_PUSH_PULL | UART_TX_PIN_AF));
+#endif
+
 #if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
@@ -69,6 +84,9 @@ void board_init(void)
 #endif
 
   // USB Power Enable
+#if(UC_SERIES != XMC45)
+  XMC_SCU_CLOCK_UngatePeripheralClock(XMC_SCU_PERIPHERAL_CLOCK_USB0);
+#endif
   XMC_SCU_RESET_DeassertPeripheralReset(XMC_SCU_PERIPHERAL_RESET_USB0);
   XMC_SCU_POWER_EnableUsb();
 }
@@ -93,7 +111,7 @@ int board_uart_read(uint8_t* buf, int len)
 {
 #ifdef UART_DEV
   for(int i=0;i<len;i++) {
-    buf[i] = uart_getc(uart_inst);
+    buf[i] = XMC_UART_CH_GetReceivedData(UART_DEV);
   }
   return len;
 #else
@@ -107,7 +125,7 @@ int board_uart_write(void const * buf, int len)
 #ifdef UART_DEV
   char const* bufch = (char const*) buf;
   for(int i=0;i<len;i++) {
-    uart_putc(uart_inst, bufch[i]);
+    XMC_UART_CH_Transmit(UART_DEV, bufch[i]);
   }
   return len;
 #else
diff --git a/hw/bsp/xmc4000/family.mk b/hw/bsp/xmc4000/family.mk
index 1094f3b72..6c460c93b 100644
--- a/hw/bsp/xmc4000/family.mk
+++ b/hw/bsp/xmc4000/family.mk
@@ -4,14 +4,10 @@ MCU_DIR = hw/mcu/infineon/mtb-xmclib-cat3
 DEPS_SUBMODULES += $(MCU_DIR)
 
 include $(TOP)/$(BOARD_PATH)/board.mk
+CPU_CORE ?= cortex-m4
 
 CFLAGS += \
   -flto \
-  -mthumb \
-  -mabi=aapcs \
-  -mcpu=cortex-m4 \
-  -mfloat-abi=hard \
-  -mfpu=fpv4-sp-d16 \
   -nostdlib -nostartfiles \
   -DCFG_TUSB_MCU=OPT_MCU_XMC4000
 
@@ -24,9 +20,11 @@ SRC_C += \
 	src/portable/synopsys/dwc2/dcd_dwc2.c \
 	$(MCU_DIR)/Newlib/syscalls.c \
 	$(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Source/system_$(MCU_VARIANT).c \
+	$(MCU_DIR)/XMCLib/src/xmc_gpio.c \
 	$(MCU_DIR)/XMCLib/src/xmc4_gpio.c \
-	$(MCU_DIR)/XMCLib/src/xmc4_scu.c
-
+	$(MCU_DIR)/XMCLib/src/xmc4_scu.c \
+	$(MCU_DIR)/XMCLib/src/xmc_usic.c \
+	$(MCU_DIR)/XMCLib/src/xmc_uart.c
 
 SRC_S += $(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Source/TOOLCHAIN_GCC_ARM/startup_$(MCU_VARIANT).S
 
@@ -35,6 +33,3 @@ INC += \
 	$(TOP)/$(MCU_DIR)/CMSIS/Core/Include \
 	$(TOP)/$(MCU_DIR)/CMSIS/Infineon/COMPONENT_$(MCU_VARIANT)/Include \
 	$(TOP)/$(MCU_DIR)/XMCLib/inc
-
-# For freeRTOS port source
-FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F
author	hathach <[email protected]>	2023-08-03 12:15:07 +0700
committer	hathach <[email protected]>	2023-08-03 12:15:07 +0700
commit	6844055dd10f35701e267dc734add839c172e8f1 (patch)
tree	95d442749ab023309cd249e0ba56d2c15452a854 /hw
parent	3d685fe7f2f383b10a2ed86d33d4b97781843f0d (diff)
parent	5cf94234d20cf74e1d6bb952ce1680b25f2568b3 (diff)