implementing dcd_edpt_open

2 files changed, 300 insertions, 0 deletions

diff --git a/hw/bsp/samg55xplained/hpl_usart_config.h b/hw/bsp/samg55xplained/hpl_usart_config.h
new file mode 100644
index 000000000..4f2837d2e
--- /dev/null
+++ b/hw/bsp/samg55xplained/hpl_usart_config.h
@@ -0,0 +1,215 @@
+/* Auto-generated config file hpl_usart_config.h */
+#ifndef HPL_USART_CONFIG_H
+#define HPL_USART_CONFIG_H
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+#include <peripheral_clk_config.h>
+
+#ifndef CONF_USART_7_ENABLE
+#define CONF_USART_7_ENABLE 1
+#endif
+
+// <h> Basic Configuration
+
+// <o> Frame parity
+// <0x0=>Even parity
+// <0x1=>Odd parity
+// <0x2=>Parity forced to 0
+// <0x3=>Parity forced to 1
+// <0x4=>No parity
+// <i> Parity bit mode for USART frame
+// <id> usart_parity
+#ifndef CONF_USART_7_PARITY
+#define CONF_USART_7_PARITY 0x4
+#endif
+
+// <o> Character Size
+// <0x0=>5 bits
+// <0x1=>6 bits
+// <0x2=>7 bits
+// <0x3=>8 bits
+// <i> Data character size in USART frame
+// <id> usart_character_size
+#ifndef CONF_USART_7_CHSIZE
+#define CONF_USART_7_CHSIZE 0x3
+#endif
+
+// <o> Stop Bit
+// <0=>1 stop bit
+// <1=>1.5 stop bits
+// <2=>2 stop bits
+// <i> Number of stop bits in USART frame
+// <id> usart_stop_bit
+#ifndef CONF_USART_7_SBMODE
+#define CONF_USART_7_SBMODE 0
+#endif
+
+// <o> Clock Output Select
+// <0=>The USART does not drive the SCK pin
+// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK
+// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK.
+// <id> usart_clock_output_select
+#ifndef CONF_USART_7_CLKO
+#define CONF_USART_7_CLKO 0
+#endif
+
+// <o> Baud rate <1-3000000>
+// <i> USART baud rate setting
+// <id> usart_baud_rate
+#ifndef CONF_USART_7_BAUD
+#define CONF_USART_7_BAUD 9600
+#endif
+
+// </h>
+
+// <e> Advanced configuration
+// <id> usart_advanced
+#ifndef CONF_USART_7_ADVANCED_CONFIG
+#define CONF_USART_7_ADVANCED_CONFIG 0
+#endif
+
+// <o> Channel Mode
+// <0=>Normal Mode
+// <1=>Automatic Echo
+// <2=>Local Loopback
+// <3=>Remote Loopback
+// <i> Channel mode in USART frame
+// <id> usart_channel_mode
+#ifndef CONF_USART_7_CHMODE
+#define CONF_USART_7_CHMODE 0
+#endif
+
+// <q> 9 bits character enable
+// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits.
+// <id> usart_9bits_enable
+#ifndef CONF_USART_7_MODE9
+#define CONF_USART_7_MODE9 0
+#endif
+
+// <o> Variable Sync
+// <0=>User defined configuration
+// <1=>sync field is updated when a character is written into US_THR
+// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter
+// <id> variable_sync
+#ifndef CONF_USART_7_VAR_SYNC
+#define CONF_USART_7_VAR_SYNC 0
+#endif
+
+// <o> Oversampling Mode
+// <0=>16 Oversampling
+// <1=>8 Oversampling
+// <i> Oversampling Mode in UART mode
+// <id> usart__oversampling_mode
+#ifndef CONF_USART_7_OVER
+#define CONF_USART_7_OVER 0
+#endif
+
+// <o> Inhibit Non Ack
+// <0=>The NACK is generated
+// <1=>The NACK is not generated
+// <i> Inhibit Non Acknowledge
+// <id> usart__inack
+#ifndef CONF_USART_7_INACK
+#define CONF_USART_7_INACK 1
+#endif
+
+// <o> Disable Successive NACK
+// <0=>NACK is sent on the ISO line as soon as a parity error occurs
+// <1=>Many parity errors generate a NACK on the ISO line
+// <i> Disable Successive NACK
+// <id> usart_dsnack
+#ifndef CONF_USART_7_DSNACK
+#define CONF_USART_7_DSNACK 0
+#endif
+
+// <o> Inverted Data
+// <0=>Data isn't inverted, nomal mode
+// <1=>Data is inverted
+// <i> Inverted Data
+// <id> usart_invdata
+#ifndef CONF_USART_7_INVDATA
+#define CONF_USART_7_INVDATA 0
+#endif
+
+// <o> Maximum Number of Automatic Iteration <0-7>
+// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0.
+// <id> usart_max_iteration
+#ifndef CONF_USART_7_MAX_ITERATION
+#define CONF_USART_7_MAX_ITERATION 0
+#endif
+
+// <q> Receive Line Filter enable
+// <i> whether the USART filters the receive line using a three-sample filter
+// <id> usart_receive_filter_enable
+#ifndef CONF_USART_7_FILTER
+#define CONF_USART_7_FILTER 0
+#endif
+
+// <q> Manchester Encoder/Decoder Enable
+// <i> whether the USART Manchester Encoder/Decoder
+// <id> usart_manchester_filter_enable
+#ifndef CONF_USART_7_MAN
+#define CONF_USART_7_MAN 0
+#endif
+
+// <o> Manchester Synchronization Mode
+// <0=>The Manchester start bit is a 0 to 1 transition
+// <1=>The Manchester start bit is a 1 to 0 transition
+// <i> Manchester Synchronization Mode
+// <id> usart_manchester_synchronization_mode
+#ifndef CONF_USART_7_MODSYNC
+#define CONF_USART_7_MODSYNC 0
+#endif
+
+// <o> Start Frame Delimiter Selector
+// <0=>Start frame delimiter is COMMAND or DATA SYNC
+// <1=>Start frame delimiter is one bit
+// <i> Start Frame Delimiter Selector
+// <id> usart_start_frame_delimiter
+#ifndef CONF_USART_7_ONEBIT
+#define CONF_USART_7_ONEBIT 0
+#endif
+
+// <o> Fractional Part <0-7>
+// <i> Fractional part of the baud rate if baud rate generator is in fractional mode
+// <id> usart_arch_fractional
+#ifndef CONF_USART_7_FRACTIONAL
+#define CONF_USART_7_FRACTIONAL 0x0
+#endif
+
+// <o> Data Order
+// <0=>LSB is transmitted first
+// <1=>MSB is transmitted first
+// <i> Data order of the data bits in the frame
+// <id> usart_arch_msbf
+#ifndef CONF_USART_7_MSBF
+#define CONF_USART_7_MSBF 0
+#endif
+
+// </e>
+
+#define CONF_USART_7_MODE 0x0
+
+// Calculate BAUD register value in UART mode
+#if CONF_FLEXCOM7_CK_SRC < 3
+#ifndef CONF_USART_7_BAUD_CD
+#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER))
+#endif
+#ifndef CONF_USART_7_BAUD_FP
+#define CONF_USART_7_BAUD_FP                                                                                           \
+	((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD)
+#endif
+#elif CONF_FLEXCOM7_CK_SRC == 3
+// No division is active. The value written in US_BRGR has no effect.
+#ifndef CONF_USART_7_BAUD_CD
+#define CONF_USART_7_BAUD_CD 1
+#endif
+#ifndef CONF_USART_7_BAUD_FP
+#define CONF_USART_7_BAUD_FP 1
+#endif
+#endif
+
+// <<< end of configuration section >>>
+
+#endif // HPL_USART_CONFIG_H
diff --git a/hw/bsp/samg55xplained/peripheral_clk_config.h b/hw/bsp/samg55xplained/peripheral_clk_config.h
new file mode 100644
index 000000000..6d390f388
--- /dev/null
+++ b/hw/bsp/samg55xplained/peripheral_clk_config.h
@@ -0,0 +1,85 @@
+/* Auto-generated config file peripheral_clk_config.h */
+#ifndef PERIPHERAL_CLK_CONFIG_H
+#define PERIPHERAL_CLK_CONFIG_H
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+/**
+ * \def CONF_HCLK_FREQUENCY
+ * \brief HCLK's Clock frequency
+ */
+#ifndef CONF_HCLK_FREQUENCY
+#define CONF_HCLK_FREQUENCY 8000000
+#endif
+
+/**
+ * \def CONF_FCLK_FREQUENCY
+ * \brief FCLK's Clock frequency
+ */
+#ifndef CONF_FCLK_FREQUENCY
+#define CONF_FCLK_FREQUENCY 8000000
+#endif
+
+/**
+ * \def CONF_CPU_FREQUENCY
+ * \brief CPU's Clock frequency
+ */
+#ifndef CONF_CPU_FREQUENCY
+#define CONF_CPU_FREQUENCY 8000000
+#endif
+
+/**
+ * \def CONF_SLCK_FREQUENCY
+ * \brief Slow Clock frequency
+ */
+#define CONF_SLCK_FREQUENCY 32768
+
+/**
+ * \def CONF_MCK_FREQUENCY
+ * \brief Master Clock frequency
+ */
+#define CONF_MCK_FREQUENCY 8000000
+
+// <o> USB Clock Source
+// <0=> USB Clock Controller (USB_48M)
+// <id> usb_clock_source
+// <i> Select the clock source for USB.
+#ifndef CONF_UDP_SRC
+#define CONF_UDP_SRC 0
+#endif
+
+/**
+ * \def CONF_UDP_FREQUENCY
+ * \brief UDP's Clock frequency
+ */
+#ifndef CONF_UDP_FREQUENCY
+#define CONF_UDP_FREQUENCY 48005120
+#endif
+
+// <h> FLEXCOM Clock Settings
+// <o> FLEXCOM Clock source
+// <0=> Master Clock (MCK)
+// <1=> MCK / 8
+// <2=> Programmable Clock Controller 6 (PMC_PCK6)
+// <2=> Programmable Clock Controller 7 (PMC_PCK7)
+// <3=> External Clock
+// <i> This defines the clock source for the FLEXCOM, PCK6 is used for FLEXCOM0/1/2/3 and PCK7 is used for FLEXCOM4/5/6/7
+// <id> flexcom_clock_source
+#ifndef CONF_FLEXCOM7_CK_SRC
+#define CONF_FLEXCOM7_CK_SRC 0
+#endif
+
+// <o> FLEXCOM External Clock Input on SCK <1-4294967295>
+// <i> Inputs the external clock frequency on SCK
+// <id> flexcom_clock_freq
+#ifndef CONF_FLEXCOM7_SCK_FREQ
+#define CONF_FLEXCOM7_SCK_FREQ 10000000
+#endif
+
+#ifndef CONF_FLEXCOM7_FREQUENCY
+#define CONF_FLEXCOM7_FREQUENCY 8000000
+#endif
+
+// <<< end of configuration section >>>
+
+#endif // PERIPHERAL_CLK_CONFIG_H