diff options
| author | hathach <[email protected]> | 2018-12-03 22:58:21 +0700 |
|---|---|---|
| committer | hathach <[email protected]> | 2018-12-03 22:58:21 +0700 |
| commit | 9fec39d893083e6a2dd15eb9b08bc5978c7726e2 (patch) | |
| tree | 7232e8cb4609db42d152e7691d596ad5d887cde9 /hw | |
| parent | 29416a5c1a8020a0c819c3dd8aebcc03d729a0d7 (diff) | |
use lpcopen for lpc43x, work well
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/bsp/ea4357/board_ea4357.c | 24 |
1 files changed, 6 insertions, 18 deletions
diff --git a/hw/bsp/ea4357/board_ea4357.c b/hw/bsp/ea4357/board_ea4357.c index da06a63c1..754b68aa1 100644 --- a/hw/bsp/ea4357/board_ea4357.c +++ b/hw/bsp/ea4357/board_ea4357.c @@ -41,8 +41,6 @@ #include "bsp/board.h" #include "pca9532.h" -#include "tusb.h" - #define BOARD_UART_PORT LPC_USART0 #define BOARD_UART_PIN_PORT 0x0f #define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD @@ -97,16 +95,7 @@ const uint32_t OscRateIn = 12000000; static const PINMUX_GRP_T pinmuxing[] = { - /* RMII pin group */ - {0x1, 19, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)}, //ENET_REF_CLK - {0x0, 1, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC6)}, //ENET_TXEN - {0x1, 18, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_TXD0 - {0x1, 20, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_TXD1 - {0x1, 17, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_MDIO - {0xC, 1, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_MDC - {0x1, 16, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC7)}, //ENET_RX_DV - {0x1, 15, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_RXD0 - {0x0, 0, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, //ENET_RXD1 + // USB /* I2S */ {0x3, 0, (SCU_PINIO_FAST | SCU_MODE_FUNC2)}, //I2S0_TX_CLK @@ -181,16 +170,15 @@ void board_init(void) UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit #endif -#if 0 //------------- USB -------------// - // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357 - scu_pinmux(0x02, 3, MD_PUP | MD_EZI, FUNC7); // USB0 VBus Power + // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) + Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - scu_pinmux(0x09, 5, GPIO_PDN, FUNC4); // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. - GPIO_SetDir(5, BIT_(18), 1); + // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. + Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); #endif -#endif // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host |