use lpcopen for ea4357, blinky ok

4 files changed, 82 insertions, 475 deletions

diff --git a/hw/bsp/ea4357/board_ea4357.c b/hw/bsp/ea4357/board_ea4357.c
index a7b4caa2a..da06a63c1 100644
--- a/hw/bsp/ea4357/board_ea4357.c
+++ b/hw/bsp/ea4357/board_ea4357.c
@@ -36,10 +36,12 @@
 */
 /**************************************************************************/
 
+#ifdef BOARD_EA4357
+
 #include "bsp/board.h"
-#include "tusb.h"
+#include "pca9532.h"
 
-#ifdef BOARD_EA4357
+#include "tusb.h"
 
 #define BOARD_UART_PORT           LPC_USART0
 #define BOARD_UART_PIN_PORT       0x0f
@@ -88,31 +90,77 @@ uint32_t tusb_hal_millis(void)
 /*------------------------------------------------------------------*/
 /* BOARD API
  *------------------------------------------------------------------*/
-void board_init(void)
+
+/* System configuration variables used by chip driver */
+const uint32_t ExtRateIn = 0;
+const uint32_t OscRateIn = 12000000;
+
+static const PINMUX_GRP_T pinmuxing[] =
 {
-  CGU_Init();
+  /* RMII pin group */
+  {0x1, 19, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)}, //ENET_REF_CLK
+  {0x0,  1, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC6)}, //ENET_TXEN
+  {0x1, 18, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_TXD0
+  {0x1, 20, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_TXD1
+  {0x1, 17, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_MDIO
+  {0xC,  1, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_MDC
+  {0x1, 16, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC7)}, //ENET_RX_DV
+  {0x1, 15, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC3)}, //ENET_RXD0
+  {0x0,  0, (SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, //ENET_RXD1
 
-#if CFG_TUSB_OS == OPT_OS_NONE // TODO may move to main.c
-  SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / BOARD_TICKS_HZ); // 1 msec tick timer
-#endif
+  /*  I2S  */
+  {0x3,  0,  (SCU_PINIO_FAST | SCU_MODE_FUNC2)}, //I2S0_TX_CLK
+  {0xC, 12,  (SCU_PINIO_FAST | SCU_MODE_FUNC6)}, //I2S0_TX_SDA
+  {0xC, 13,  (SCU_PINIO_FAST | SCU_MODE_FUNC6)}, //I2S0_TX_WS
+  {0x6,  0,  (SCU_PINIO_FAST | SCU_MODE_FUNC4)}, //I2S0_RX_SCK
+  {0x6,  1,  (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, //I2S0_RX_WS
+  {0x6,  2,  (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, //I2S0_RX_SDA
+};
 
-  //------------- USB -------------//
-  // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
-  scu_pinmux(0x02, 3, MD_PUP | MD_EZI, FUNC7);		// USB0 VBus Power
+/* Pin clock mux values, re-used structure, value in first index is meaningless */
+static const PINMUX_GRP_T pinclockmuxing[] =
+{
+  {0, 0,  (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)},
+  {0, 1,  (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)},
+  {0, 2,  (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)},
+  {0, 3,  (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)},
+};
 
-  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
-  scu_pinmux(0x09, 5, GPIO_PDN, FUNC4); // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
-  GPIO_SetDir(5, BIT_(18), 1);
-  #endif
+// Invoked by startup code
+void SystemInit(void)
+{
+	/* Setup system level pin muxing */
+	Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
 
-  // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required
-  // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host
+	/* Clock pins only, group field not used */
+	for (int i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++)
+	{
+		Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc);
+	}
+
+  Chip_SetupXtalClocking();
+}
+
+void board_init(void)
+{
+  SystemCoreClockUpdate();
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+  SysTick_Config( SystemCoreClock / BOARD_TICKS_HZ );
+#endif
+
+  Chip_GPIO_Init(LPC_GPIO_PORT);
 
   //------------- LED -------------//
-  I2C_Init(LPC_I2C0, 100000);
-  I2C_Cmd(LPC_I2C0, ENABLE);
+  /* Init I2C */
+  Chip_SCU_I2C0PinConfig(I2C0_STANDARD_FAST_MODE);
+  Chip_I2C_Init(I2C0);
+  Chip_I2C_SetClockRate(I2C0, 100000);
+  Chip_I2C_SetMasterEventHandler(I2C0, Chip_I2C_EventHandlerPolling);
+
   pca9532_init();
 
+#if 0
   //------------- BUTTON -------------//
   for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++)
   {
@@ -120,7 +168,6 @@ void board_init(void)
     GPIO_SetDir(buttons[i].gpio_port, BIT_(buttons[i].gpio_pin), 0);
   }
 
-#if 0
   //------------- UART -------------//
   scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1);
   scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1);
@@ -134,8 +181,19 @@ void board_init(void)
   UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
 #endif
 
-  //------------- NAND Flash (K9FXX) Size = 128M, Page Size = 2K, Block Size = 128K, Number of Block = 1024 -------------//
-//  nand_init();
+#if 0
+  //------------- USB -------------//
+  // USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
+  scu_pinmux(0x02, 3, MD_PUP | MD_EZI, FUNC7);		// USB0 VBus Power
+
+  #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
+  scu_pinmux(0x09, 5, GPIO_PDN, FUNC4); // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low.
+  GPIO_SetDir(5, BIT_(18), 1);
+  #endif
+#endif
+
+  // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required
+  // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host
 }
 
 //--------------------------------------------------------------------+
@@ -157,14 +215,14 @@ void board_led_control(bool state)
 //--------------------------------------------------------------------+
 static bool button_read(uint8_t id)
 {
-  return !BIT_TEST_( GPIO_ReadValue(buttons[id].gpio_port), buttons[id].gpio_pin ); // button is active low
+//  return !BIT_TEST_( GPIO_ReadValue(buttons[id].gpio_port), buttons[id].gpio_pin ); // button is active low
 }
 
 uint32_t board_buttons(void)
 {
   uint32_t result = 0;
 
-  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? BIT_(i) : 0);
+//  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) result |= (button_read(i) ? BIT_(i) : 0);
 
   return result;
 }
diff --git a/hw/bsp/ea4357/board_ea4357.h b/hw/bsp/ea4357/board_ea4357.h
index 87282718d..80ff678b5 100644
--- a/hw/bsp/ea4357/board_ea4357.h
+++ b/hw/bsp/ea4357/board_ea4357.h
@@ -43,15 +43,7 @@
  extern "C" {
 #endif
 
-#include "LPC43xx.h"
-#include "lpc43xx_scu.h"
-#include "lpc43xx_cgu.h"
-#include "lpc43xx_gpio.h"
-#include "lpc43xx_uart.h"
-#include "lpc43xx_i2c.h"
-
-// For LEDs
-#include "oem_base_board/pca9532.h"
+#include "chip.h"
 
 #ifdef __cplusplus
  }
diff --git a/hw/bsp/ea4357/oem_base_board/pca9532.c b/hw/bsp/ea4357/oem_base_board/pca9532.c
deleted file mode 100644
index 7b526f670..000000000
--- a/hw/bsp/ea4357/oem_base_board/pca9532.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-
-/*
- * NOTE: I2C must have been initialized before calling any functions in this
- * file.
- */
-
-/******************************************************************************
- * Includes
- *****************************************************************************/
-#include "bsp/board.h"
-
-#ifdef BOARD_EA4357
-
-#include "lpc43xx_i2c.h"
-#include "lpc43xx_cgu.h"
-#include "lpc_types.h"
-#include "pca9532.h"
-
-/******************************************************************************
- * Defines and typedefs
- *****************************************************************************/
-
-#define I2C_PORT (LPC_I2C0)
-
-#define LS_MODE_ON     0x01
-#define LS_MODE_BLINK0 0x02
-#define LS_MODE_BLINK1 0x03
-
-/******************************************************************************
- * External global variables
- *****************************************************************************/
-
-
-/******************************************************************************
- * Local variables
- *****************************************************************************/
-
-static uint16_t blink0Shadow = 0;
-static uint16_t blink1Shadow = 0;
-static uint16_t ledStateShadow = 0;
-
-/******************************************************************************
- * Local Functions
- *****************************************************************************/
-
-static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len)
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = buf;
-	i2cData.tx_length = len;
-	i2cData.rx_data = NULL;
-	i2cData.rx_length = 0;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len)
-{
-  I2C_M_SETUP_Type i2cData;
-
-	i2cData.sl_addr7bit = addr;
-	i2cData.tx_data = NULL;
-	i2cData.tx_length = 0;
-	i2cData.rx_data = buf;
-	i2cData.rx_length = len;
-	i2cData.retransmissions_max = 3;
-
-  return I2C_MasterTransferData(I2C_PORT, &i2cData, I2C_TRANSFER_POLLING);
-}
-
-static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode)
-{
-#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 )
-
-    int i = 0;
-
-    for (i = 0; i < 4; i++) {
-
-        ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0)
-                | (IS_LED_SET(0x0002, states)*mode << 2)
-                | (IS_LED_SET(0x0004, states)*mode << 4)
-                | (IS_LED_SET(0x0008, states)*mode << 6) );
-
-        states >>= 4;
-    }
-}
-
-static void setLeds(void)
-{
-    uint8_t buf[5];
-    uint8_t ls[4] = {0,0,0,0};
-    uint16_t states = ledStateShadow;
-
-    /* LEDs in On/Off state */
-    setLsStates(states, ls, LS_MODE_ON);
-
-    /* set the LEDs that should blink */
-    setLsStates(blink0Shadow, ls, LS_MODE_BLINK0);
-    setLsStates(blink1Shadow, ls, LS_MODE_BLINK1);
-
-
-    buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC;
-    buf[1] = ls[0];
-    buf[2] = ls[1];
-    buf[3] = ls[2];
-    buf[4] = ls[3];
-    I2CWrite(PCA9532_I2C_ADDR, buf, 5);
-}
-
-/******************************************************************************
- * Public Functions
- *****************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *    Initialize the PCA9532 Device
- *
- *****************************************************************************/
-void pca9532_init (void)
-{
-    /* nothing to initialize */
-}
-
-/******************************************************************************
- *
- * Description:
- *    Get the LED states
- *
- * Params:
- *    [in]  shadow  - TRUE if the states should be retrieved from the shadow
- *                    variables. The shadow variable are updated when any
- *                    of setLeds, setBlink0Leds and/or setBlink1Leds are
- *                    called.
- *
- *                    FALSE if the state should be retrieved from the PCA9532
- *                    device. A blinkin LED may be reported as on or off
- *                    depending on the state when calling the function.
- *
- * Returns:
- *      A mask where a 1 indicates that a LED is on (or blinking).
- *
- *****************************************************************************/
-uint16_t pca9532_getLedState (uint32_t shadow)
-{
-    uint8_t buf[2];
-    uint16_t ret = 0;
-
-    if (shadow) {
-        /* a blink LED is reported as on*/
-        ret = (ledStateShadow | blink0Shadow | blink1Shadow);
-    }
-    else {
-
-        /*
-         * A blinking LED may be reported as on or off depending on
-         * its state when reading the Input register.
-         */
-
-        buf[0] = PCA9532_INPUT0;
-        I2CWrite(PCA9532_I2C_ADDR, buf, 1);
-
-        I2CRead(PCA9532_I2C_ADDR, buf, 1);
-        ret = buf[0];
-
-
-        buf[0] = PCA9532_INPUT1;
-        I2CWrite(PCA9532_I2C_ADDR, buf, 1);
-
-        I2CRead(PCA9532_I2C_ADDR, buf, 1);
-        ret |= (buf[0] << 8);
-
-
-        /* invert since LEDs are active low */
-        ret = ((~ret) & 0xFFFF);
-    }
-
-    return (ret & ~PCA9532_NOT_USED);
-}
-
-
-/******************************************************************************
- *
- * Description:
- *    Set LED states (on or off).
- *
- * Params:
- *    [in]  ledOnMask  - The LEDs that should be turned on. This mask has
- *                       priority over ledOffMask
- *    [in]  ledOffMask - The LEDs that should be turned off.
- *
- *****************************************************************************/
-void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask)
-{
-    /* turn off leds */
-    ledStateShadow &= (~(ledOffMask) & 0xffff);
-
-    /* ledOnMask has priority over ledOffMask */
-    ledStateShadow |= ledOnMask;
-
-    /* turn off blinking */
-    blink0Shadow &= (~(ledOffMask) & 0xffff);
-    blink1Shadow &= (~(ledOffMask) & 0xffff);
-
-    setLeds();
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set the blink period for PWM0. Valid values are 0 - 255 where 0
- *    means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz.
- *
- * Params:
- *    [in]  period  - the period for pwm0
- *
- *****************************************************************************/
-void pca9532_setBlink0Period(uint8_t period)
-{
-    uint8_t buf[2];
-
-    buf[0] = PCA9532_PSC0;
-    buf[1] = period;
-    I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED
- *    is on 25% of the period.
- *
- * Params:
- *    [in]  duty  - duty cycle
- *
- *****************************************************************************/
-void pca9532_setBlink0Duty(uint8_t duty)
-{
-    uint8_t buf[2];
-    uint32_t tmp = duty;
-    if (tmp > 100) {
-        tmp = 100;
-    }
-
-    tmp = (256 * tmp)/100;
-
-    buf[0] = PCA9532_PWM0;
-    buf[1] = tmp;
-    I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set the LEDs that should blink with rate and duty cycle from PWM0.
- *    Blinking is turned off with pca9532_setLeds.
- *
- * Params:
- *    [in]  ledMask  - LEDs that should blink.
- *
- *****************************************************************************/
-void pca9532_setBlink0Leds(uint16_t ledMask)
-{
-    blink0Shadow |= ledMask;
-    setLeds();
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set the blink period for PWM1. Valid values are 0 - 255 where 0
- *    means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz.
- *
- * Params:
- *    [in]  period  - The period for PWM1
- *
- *****************************************************************************/
-void pca9532_setBlink1Period(uint8_t period)
-{
-    uint8_t buf[2];
-
-    buf[0] = PCA9532_PSC1;
-    buf[1] = period;
-    I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED
- *    is on 25% of the period.
- *
- * Params:
- *    [in]  duty  - duty cycle.
- *
- *****************************************************************************/
-void pca9532_setBlink1Duty(uint8_t duty)
-{
-    uint8_t buf[2];
-
-    uint32_t tmp = duty;
-    if (tmp > 100) {
-        tmp = 100;
-    }
-
-    tmp = (256 * tmp)/100;
-
-    buf[0] = PCA9532_PWM1;
-    buf[1] = tmp;
-    I2CWrite(PCA9532_I2C_ADDR, buf, 2);
-}
-
-/******************************************************************************
- *
- * Description:
- *    Set the LEDs that should blink with rate and duty cycle from PWM1.
- *    Blinking is turned off with pca9532_setLeds.
- *
- * Params:
- *    [in]  ledMask  - LEDs that should blink.
- *
- *****************************************************************************/
-void pca9532_setBlink1Leds(uint16_t ledMask)
-{
-    blink1Shadow |= ledMask;
-    setLeds();
-}
-
-#endif
diff --git a/hw/bsp/ea4357/oem_base_board/pca9532.h b/hw/bsp/ea4357/oem_base_board/pca9532.h
deleted file mode 100644
index 885075326..000000000
--- a/hw/bsp/ea4357/oem_base_board/pca9532.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*****************************************************************************
- *
- *   Copyright(C) 2011, Embedded Artists AB
- *   All rights reserved.
- *
- ******************************************************************************
- * Software that is described herein is for illustrative purposes only
- * which provides customers with programming information regarding the
- * products. This software is supplied "AS IS" without any warranties.
- * Embedded Artists AB assumes no responsibility or liability for the
- * use of the software, conveys no license or title under any patent,
- * copyright, or mask work right to the product. Embedded Artists AB
- * reserves the right to make changes in the software without
- * notification. Embedded Artists AB also make no representation or
- * warranty that such application will be suitable for the specified
- * use without further testing or modification.
- *****************************************************************************/
-#ifndef __PCA9532C_H
-#define __PCA9532C_H
-
-
-#define PCA9532_I2C_ADDR    (0x60)
-
-#define PCA9532_INPUT0 0x00
-#define PCA9532_INPUT1 0x01
-#define PCA9532_PSC0   0x02
-#define PCA9532_PWM0   0x03
-#define PCA9532_PSC1   0x04
-#define PCA9532_PWM1   0x05
-#define PCA9532_LS0    0x06
-#define PCA9532_LS1    0x07
-#define PCA9532_LS2    0x08
-#define PCA9532_LS3    0x09
-
-#define PCA9532_AUTO_INC 0x10
-
-
-/*
- * The Keys on the base board are mapped to LED0 -> LED3 on
- * the PCA9532.
- */
-
-#define KEY1 0x0001
-#define KEY2 0x0002
-#define KEY3 0x0004
-#define KEY4 0x0008
-
-#define KEY_MASK 0x000F
-
-/*
- * MMC Card Detect and MMC Write Protect are mapped to LED4
- * and LED5 on the PCA9532. Please note that WP is active low.
- */
-
-#define MMC_CD 0x0010
-#define MMC_WP 0x0020
-
-#define MMC_MASK  0x30
-
-/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */
-#define PCA9532_NOT_USED 0xC0
-
-/*
- * Below are the LED constants to use when enabling/disabling a LED.
- * The LED names are the names printed on the base board and not
- * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532,
- * base_LED2 -> LED9, and so on.
- */
-
-#define LED1 0x0100
-#define LED2 0x0200
-#define LED3 0x0400
-#define LED4 0x0800
-#define LED5 0x1000
-#define LED6 0x2000
-#define LED7 0x4000
-#define LED8 0x8000
-
-#define LED_MASK 0xFF00
-
-void pca9532_init (void);
-uint16_t pca9532_getLedState (uint32_t shadow);
-void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask);
-void pca9532_setBlink0Period(uint8_t period);
-void pca9532_setBlink0Duty(uint8_t duty);
-void pca9532_setBlink0Leds(uint16_t ledMask);
-void pca9532_setBlink1Period(uint8_t period);
-void pca9532_setBlink1Duty(uint8_t duty);
-void pca9532_setBlink1Leds(uint16_t ledMask);
-
-#endif /* end __PCA9532C_H */
-/****************************************************************************
-**                            End Of File
-*****************************************************************************/