better support for hid device set/get protocol

add caplock detection for hid_composite

2 files changed, 61 insertions, 6 deletions

diff --git a/hw/bsp/board.c b/hw/bsp/board.c
index 383a02ef4..c21c9e976 100644
--- a/hw/bsp/board.c
+++ b/hw/bsp/board.c
@@ -25,6 +25,60 @@
 
 #include "board.h"
 
+#if 0
+#define LED_PHASE_MAX   8
+
+static struct
+{
+  uint32_t phase[LED_PHASE_MAX];
+  uint8_t phase_count;
+
+  bool led_state;
+  uint8_t current_phase;
+  uint32_t current_ms;
+}led_pattern;
+
+void board_led_pattern(uint32_t const phase_ms[], uint8_t count)
+{
+  memcpy(led_pattern.phase, phase_ms, 4*count);
+  led_pattern.phase_count = count;
+
+  // reset with 1st phase is on
+  led_pattern.current_ms = board_millis();
+  led_pattern.current_phase = 0;
+  led_pattern.led_state = true;
+  board_led_on();
+}
+
+void board_led_task(void)
+{
+  if ( led_pattern.phase_count == 0 ) return;
+
+  uint32_t const duration = led_pattern.phase[led_pattern.current_phase];
+
+  // return if not enough time
+  if (board_millis() - led_pattern.current_ms < duration) return;
+
+  led_pattern.led_state = !led_pattern.led_state;
+  board_led_write(led_pattern.led_state);
+
+  led_pattern.current_ms += duration;
+  led_pattern.current_phase++;
+
+  if (led_pattern.current_phase == led_pattern.phase_count)
+  {
+    led_pattern.current_phase = 0;
+    led_pattern.led_state = true;
+    board_led_on();
+  }
+}
+
+#endif
+
+//--------------------------------------------------------------------+
+// newlib read()/write() retarget
+//--------------------------------------------------------------------+
+
 #if defined(__MSP430__)
   #define sys_write   write
   #define sys_read    read
@@ -33,10 +87,6 @@
   #define sys_read    _read
 #endif
 
-//--------------------------------------------------------------------+
-// newlib read()/write() retarget
-//--------------------------------------------------------------------+
-
 #if defined(LOGGER_RTT)
 // Logging with RTT
 
diff --git a/hw/bsp/board.h b/hw/bsp/board.h
index 7b77def50..782e0939c 100644
--- a/hw/bsp/board.h
+++ b/hw/bsp/board.h
@@ -54,6 +54,10 @@ void board_init(void);
 // Turn LED on or off
 void board_led_write(bool state);
 
+// Control led pattern using phase duration in ms.
+// For each phase, LED is toggle then repeated, board_led_task() is required to be called
+//void board_led_pattern(uint32_t const phase_ms[], uint8_t count);
+
 // Get the current state of button
 // a '1' means active (pressed), a '0' means inactive.
 uint32_t board_button_read(void);
@@ -81,11 +85,12 @@ int board_uart_write(void const * buf, int len);
   }
 
 #elif CFG_TUSB_OS == OPT_OS_PICO
-#include "pico/time.h"
-static inline uint32_t board_millis(void)
+  #include "pico/time.h"
+  static inline uint32_t board_millis(void)
   {
     return to_ms_since_boot(get_absolute_time());
   }
+
 #elif CFG_TUSB_OS == OPT_OS_RTTHREAD
   static inline uint32_t board_millis(void)
   {