rename TUSB_OPT_DEVICE_ENABLED to CFG_TUD_ENABLED

TUSB_OPT_DEVICE_ENABLED still usable for backward compatible

14 files changed, 18 insertions, 18 deletions

diff --git a/hw/bsp/board.h b/hw/bsp/board.h
index 782e0939c..b4e0cb298 100644
--- a/hw/bsp/board.h
+++ b/hw/bsp/board.h
@@ -120,7 +120,7 @@ static inline void board_delay(uint32_t ms)
   uint32_t start_ms = board_millis();
   while (board_millis() - start_ms < ms)
   {
-    #if TUSB_OPT_DEVICE_ENABLED
+    #if CFG_TUD_ENABLED
     // take chance to run usb background
     tud_task();
     #endif
diff --git a/hw/bsp/brtmm90x/family.c b/hw/bsp/brtmm90x/family.c
index 803a62a95..6b3c1f56c 100644
--- a/hw/bsp/brtmm90x/family.c
+++ b/hw/bsp/brtmm90x/family.c
@@ -30,7 +30,7 @@
 #include <registers/ft900_registers.h>
 #include <ft900.h>
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 int8_t board_ft90x_vbus(void); // Board specific implementation of VBUS detection for USB device.
 extern void ft90x_usbd_pm_ISR(uint16_t pmcfg); // Interrupt handler for USB device power management
 #endif
@@ -152,14 +152,14 @@ void board_pm_ISR(void)
               MASK_SYS_PMCFG_HOST_RESUME_DEV)
     )
     {
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
         ft90x_usbd_pm_ISR(pmcfg);
 #endif
     }
 #endif
 }
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 int8_t board_ft90x_vbus(void)
 {
 	return gpio_read(USBD_VBUS_DTC_PIN);
diff --git a/hw/bsp/d5035_01/d5035_01.c b/hw/bsp/d5035_01/d5035_01.c
index 5685ff16f..f356851f7 100644
--- a/hw/bsp/d5035_01/d5035_01.c
+++ b/hw/bsp/d5035_01/d5035_01.c
@@ -270,7 +270,7 @@ void board_init(void)
 #endif
 
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 #if CFG_TUSB_DEBUG >= 2
 	uart_send_str(BOARD_NAME " USB device enabled\n");
 #endif
diff --git a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c
index 95fe70d01..a4d996810 100644
--- a/hw/bsp/da14695_dk_usb/da14695_dk_usb.c
+++ b/hw/bsp/da14695_dk_usb/da14695_dk_usb.c
@@ -73,7 +73,7 @@ void board_init(void)
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   // This board is USB powered there is no need to monitor
   // VBUS line.  Notify driver that VBUS is present.
   tusb_vbus_changed(true);
diff --git a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c
index 0441c000c..13113fb95 100644
--- a/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c
+++ b/hw/bsp/da1469x_dk_pro/da1469x-dk-pro.c
@@ -36,7 +36,7 @@ void USB_IRQHandler(void)
   tud_int_handler(0);
 }
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 // DA146xx driver function that must be called whenever VBUS changes
 extern void tusb_vbus_changed(bool present);
 
@@ -85,7 +85,7 @@ void board_init(void)
   // 1ms tick timer
   SysTick_Config(SystemCoreClock / 1000);
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   // Setup interrupt for both connect and disconnect
   CRG_TOP->VBUS_IRQ_MASK_REG = CRG_TOP_VBUS_IRQ_MASK_REG_VBUS_IRQ_EN_FALL_Msk |
                                CRG_TOP_VBUS_IRQ_MASK_REG_VBUS_IRQ_EN_RISE_Msk;
diff --git a/hw/bsp/frdm_kl25z/frdm_kl25z.c b/hw/bsp/frdm_kl25z/frdm_kl25z.c
index 2930ed56e..5f2a5b23d 100644
--- a/hw/bsp/frdm_kl25z/frdm_kl25z.c
+++ b/hw/bsp/frdm_kl25z/frdm_kl25z.c
@@ -42,7 +42,7 @@ void USB0_IRQHandler(void)
 #if TUSB_OPT_HOST_ENABLED
   tuh_int_handler(0);
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }
diff --git a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c
index 101cc8a4c..e62544390 100644
--- a/hw/bsp/lpcxpresso1769/lpcxpresso1769.c
+++ b/hw/bsp/lpcxpresso1769/lpcxpresso1769.c
@@ -156,7 +156,7 @@ void board_init(void)
 //    0x1B // Host + Device + OTG + AHB
   };
 
-  uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
+  uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
 
   LPC_USB->OTGClkCtrl = clk_en;
   while ( (LPC_USB->OTGClkSt & clk_en) != clk_en );
diff --git a/hw/bsp/mbed1768/mbed1768.c b/hw/bsp/mbed1768/mbed1768.c
index 5495ed166..85dffde77 100644
--- a/hw/bsp/mbed1768/mbed1768.c
+++ b/hw/bsp/mbed1768/mbed1768.c
@@ -130,7 +130,7 @@ void board_init(void)
 //    0x1B // Host + Device + OTG + AHB
   };
 
-  uint32_t const clk_en = TUSB_OPT_DEVICE_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
+  uint32_t const clk_en = CFG_TUD_ENABLED ? USBCLK_DEVCIE : USBCLK_HOST;
 
   LPC_USB->OTGClkCtrl = clk_en;
   while ( (LPC_USB->OTGClkSt & clk_en) != clk_en );
diff --git a/hw/bsp/msp432e4/family.c b/hw/bsp/msp432e4/family.c
index 262dc1d30..d553b362e 100644
--- a/hw/bsp/msp432e4/family.c
+++ b/hw/bsp/msp432e4/family.c
@@ -36,7 +36,7 @@ void USB0_IRQHandler(void)
 #if TUSB_OPT_HOST_ENABLED
   tuh_int_handler(0);
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }
@@ -148,7 +148,7 @@ void board_init(void)
   USB0->GPCS = USB_GPCS_DEVMOD_OTG;
   USB0->EPC  = USB_EPC_EPENDE | USB_EPC_EPEN_HIGH;
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   USB0->GPCS = USB_GPCS_DEVMOD_DEVVBUS;
 #endif
 }
diff --git a/hw/bsp/nrf/family.c b/hw/bsp/nrf/family.c
index ed742daaf..a07332d4c 100644
--- a/hw/bsp/nrf/family.c
+++ b/hw/bsp/nrf/family.c
@@ -100,7 +100,7 @@ void board_init(void)
   nrfx_uarte_init(&_uart_id, &uart_cfg, NULL); //uart_handler);
 
   //------------- USB -------------//
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice
   // 2 is highest for application
   NVIC_SetPriority(USBD_IRQn, 2);
diff --git a/hw/bsp/rp2040/family.c b/hw/bsp/rp2040/family.c
index 10ead2776..6d0f7ed38 100644
--- a/hw/bsp/rp2040/family.c
+++ b/hw/bsp/rp2040/family.c
@@ -138,7 +138,7 @@ void board_init(void)
 #endif
 
   // todo probably set up device mode?
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 
 #endif
 
diff --git a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c
index d658ee5dd..56bf575b2 100644
--- a/hw/bsp/rx/boards/rx65n_target/rx65n_target.c
+++ b/hw/bsp/rx/boards/rx65n_target/rx65n_target.c
@@ -179,7 +179,7 @@ void INT_Excep_USB0_USBI0(void)
 #if TUSB_OPT_HOST_ENABLED
   tuh_int_handler(0);
 #endif
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }
diff --git a/hw/bsp/same54xplainedpro/same54xplainedpro.c b/hw/bsp/same54xplainedpro/same54xplainedpro.c
index 4c38fc6eb..ba1eec38b 100644
--- a/hw/bsp/same54xplainedpro/same54xplainedpro.c
+++ b/hw/bsp/same54xplainedpro/same54xplainedpro.c
@@ -223,7 +223,7 @@ void board_init(void)
 #endif
 
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
 #if CFG_TUSB_DEBUG >= 2
 	uart_send_str(BOARD_NAME " USB device enabled\n");
 #endif
diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c
index 449781ce1..1e19e7f43 100644
--- a/hw/bsp/tm4c123/family.c
+++ b/hw/bsp/tm4c123/family.c
@@ -11,7 +11,7 @@ void USB0_Handler(void)
   tuh_int_handler(0);
 #endif
 
-#if TUSB_OPT_DEVICE_ENABLED
+#if CFG_TUD_ENABLED
   tud_int_handler(0);
 #endif
 }