Merge branch 'master' into enhance-bsp

45 files changed, 1603 insertions, 328 deletions

diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h
index 18c5b0a32..a7dcabfcc 100644
--- a/hw/bsp/board_api.h
+++ b/hw/bsp/board_api.h
@@ -49,6 +49,9 @@ extern "C" {
 // Initialize on-board peripherals : led, button, uart and USB
 void board_init(void);
 
+// Init board after tinyusb is initialized
+void board_init_after_tusb(void) TU_ATTR_WEAK;
+
 // Turn LED on or off
 void board_led_write(bool state);
 
diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake
index e5571b3b5..0375b29aa 100644
--- a/hw/bsp/family_support.cmake
+++ b/hw/bsp/family_support.cmake
@@ -181,6 +181,12 @@ endfunction()
 function(family_configure_common TARGET RTOS)
   family_add_rtos(${TARGET} ${RTOS})
 
+  string(TOUPPER ${BOARD} BOARD_UPPER)
+  string(REPLACE "-" "_" BOARD_UPPER ${BOARD_UPPER})
+  target_compile_definitions(${TARGET} PUBLIC
+    BOARD_${BOARD_UPPER}
+  )
+
   # run size after build
   add_custom_command(TARGET ${TARGET} POST_BUILD
     COMMAND ${CMAKE_SIZE} $<TARGET_FILE:${TARGET}>
@@ -227,6 +233,10 @@ function(family_add_tinyusb TARGET OPT_MCU RTOS)
 
   if (DEFINED LOG)
     target_compile_definitions(${TARGET}-tinyusb_config INTERFACE CFG_TUSB_DEBUG=${LOG})
+    if (LOG STREQUAL "4")
+      # no inline for debug level 4
+      target_compile_definitions(${TARGET}-tinyusb_config INTERFACE TU_ATTR_ALWAYS_INLINE=)
+    endif ()
   endif()
 
   if (RTOS STREQUAL "freertos")
@@ -398,6 +408,18 @@ function(family_flash_nxplink TARGET)
 endfunction()
 
 
+function(family_flash_dfu_util TARGET OPTION)
+  if (NOT DEFINED DFU_UTIL)
+    set(DFU_UTIL dfu-util)
+  endif ()
+
+  add_custom_target(${TARGET}-dfu-util
+    DEPENDS ${TARGET}
+    COMMAND ${DFU_UTIL} -R -d ${DFU_UTIL_VID_PID} -a 0 -D $<TARGET_FILE_DIR:${TARGET}>/${TARGET}.bin
+    VERBATIM
+    )
+endfunction()
+
 #----------------------------------
 # Family specific
 #----------------------------------
diff --git a/hw/bsp/ra/board_cfg.h b/hw/bsp/ra/board_cfg.h
new file mode 100644
index 000000000..baed46b5f
--- /dev/null
+++ b/hw/bsp/ra/board_cfg.h
@@ -0,0 +1,45 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _BOARD_CFG_H
+#define _BOARD_CFG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8)
+  #define BOARD_HAS_USB_HIGHSPEED
+#endif
+
+// for SystemInit()
+void bsp_init(void * p_args);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/portenta_c33/board.cmake b/hw/bsp/ra/boards/portenta_c33/board.cmake
new file mode 100644
index 000000000..1837d8450
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/board.cmake
@@ -0,0 +1,25 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra6m5)
+
+set(JLINK_DEVICE R7FA6M5BH)
+set(DFU_UTIL_VID_PID 2341:0368)
+
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
+
+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+set(PORT 1)
+endif()
+
+# Host port will be the other port
+set(HOST_PORT $<NOT:${PORT}>)
+
+function(update_board TARGET)
+  target_compile_definitions(${TARGET} PUBLIC
+    BOARD_TUD_RHPORT=${PORT}
+    BOARD_TUH_RHPORT=${HOST_PORT}
+    # port 0 is fullspeed, port 1 is highspeed
+    BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    )
+endfunction()
diff --git a/hw/bsp/ra/boards/portenta_c33/board.h b/hw/bsp/ra/boards/portenta_c33/board.h
new file mode 100644
index 000000000..7841ec8b8
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/board.h
@@ -0,0 +1,68 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1                  BSP_IO_PORT_01_PIN_07 // Red LED
+#define LED_STATE_ON          1
+
+#define SW1                   BSP_IO_PORT_04_PIN_08 // D12
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW },
+    { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
+
+    // USB FS
+    { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH },
+    { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
+
+    // USB HS
+    { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS },
+    { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+    { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
+
+    // ETM Trace
+    #ifdef TRACE_ETM
+    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+     #endif
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/portenta_c33/board.mk b/hw/bsp/ra/boards/portenta_c33/board.mk
new file mode 100644
index 000000000..6a5c2ffce
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/board.mk
@@ -0,0 +1,12 @@
+CPU_CORE = cortex-m33
+MCU_VARIANT = ra6m5
+
+LD_FILE = ${BOARD_PATH}/${BOARD}.ld
+
+# Port 1 is highspeed
+PORT ?= 1
+
+JLINK_DEVICE = R7FA6M5BH
+DFU_UTIL_OPTION = -d 2341:0368 -a 0
+
+flash: flash-dfu-util
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..33d381850
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,63 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (2)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+  #define BSP_CFG_RTOS (1)
+#else
+  #define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
+#if defined(_RA_BOOT_IMAGE)
+  #define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x1000)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
+
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..bd6a901c3
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (6)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..6845183db
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA6M5BH3CFC
+#define BSP_MCU_FEATURE_SET ('B')
+#define BSP_ROM_SIZE_BYTES (2097152)
+#define BSP_RAM_SIZE_BYTES (524288)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (176)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..d5428540f
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,387 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA6M5 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 1
+  #define BSP_HOCO_HZ                 (18000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ                 (20000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+
+#define BSP_CFG_FLL_ENABLE                 (0)
+
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
+
+#if defined(_RA_TZ_SECURE)
+            #define BSP_TZ_SECURE_BUILD           (1)
+            #define BSP_TZ_NONSECURE_BUILD        (0)
+            #elif defined(_RA_TZ_NONSECURE)
+            #define BSP_TZ_SECURE_BUILD           (0)
+            #define BSP_TZ_NONSECURE_BUILD        (1)
+            #else
+#define BSP_TZ_SECURE_BUILD           (0)
+#define BSP_TZ_NONSECURE_BUILD        (0)
+#endif
+
+/* TrustZone Settings */
+#define BSP_TZ_CFG_INIT_SECURE_ONLY       (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE))
+#define BSP_TZ_CFG_SKIP_INIT              (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY)
+#define BSP_TZ_CFG_EXCEPTION_RESPONSE     (0)
+
+/* CMSIS TrustZone Settings */
+#define SCB_CSR_AIRCR_INIT                (1)
+#define SCB_AIRCR_BFHFNMINS_VAL           (0)
+#define SCB_AIRCR_SYSRESETREQS_VAL        (1)
+#define SCB_AIRCR_PRIS_VAL                (0)
+#define TZ_FPU_NS_USAGE                   (1)
+#ifndef SCB_NSACR_CP10_11_VAL
+#define SCB_NSACR_CP10_11_VAL             (3U)
+#endif
+
+#ifndef FPU_FPCCR_TS_VAL
+#define FPU_FPCCR_TS_VAL                  (1U)
+#endif
+#define FPU_FPCCR_CLRONRETS_VAL           (1)
+
+#ifndef FPU_FPCCR_CLRONRET_VAL
+#define FPU_FPCCR_CLRONRET_VAL            (1)
+#endif
+
+/* The C-Cache line size that is configured during startup. */
+#ifndef BSP_CFG_C_CACHE_LINE_SIZE
+#define BSP_CFG_C_CACHE_LINE_SIZE   (1U)
+#endif
+
+/* Type 1 Peripheral Security Attribution */
+
+/* Peripheral Security Attribution Register (PSAR) Settings */
+#ifndef BSP_TZ_CFG_PSARB
+#define BSP_TZ_CFG_PSARB (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \
+            (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \
+            0x33f4f9) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARC
+#define BSP_TZ_CFG_PSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \
+            0x7fffcef4) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARD
+#define BSP_TZ_CFG_PSARD (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \
+            0xffae07f0) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARE
+#define BSP_TZ_CFG_PSARE (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \
+            0x3f3ff8) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_MSSAR
+#define BSP_TZ_CFG_MSSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \
+            0xfffffffc) /* Unused */
+#endif
+
+/* Type 2 Peripheral Security Attribution */
+
+/* Security attribution for Cache registers. */
+#ifndef BSP_TZ_CFG_CSAR
+#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for RSTSRn registers. */
+#ifndef BSP_TZ_CFG_RSTSAR
+#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU)
+#endif
+
+/* Security attribution for registers of LVD channels. */
+#ifndef BSP_TZ_CFG_LVDSAR
+#define BSP_TZ_CFG_LVDSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \
+            0xFFFFFFFCU)
+#endif
+
+/* Security attribution for LPM registers. */
+#ifndef BSP_TZ_CFG_LPMSAR
+#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU)
+#endif
+/* Deep Standby Interrupt Factor Security Attribution Register. */
+#ifndef BSP_TZ_CFG_DPFSAR
+#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution for CGC registers. */
+#ifndef BSP_TZ_CFG_CGFSAR
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect all CGC registers from Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU)
+#endif
+#endif
+
+/* Security attribution for Battery Backup registers. */
+#ifndef BSP_TZ_CFG_BBFSAR
+#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF)
+#endif
+
+/* Security attribution for registers for IRQ channels. */
+#ifndef BSP_TZ_CFG_ICUSARA
+#define BSP_TZ_CFG_ICUSARA (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \
+            0xFFFF0000U)
+#endif
+
+/* Security attribution for NMI registers. */
+#ifndef BSP_TZ_CFG_ICUSARB
+#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */
+#endif
+
+/* Security attribution for registers for DMAC channels */
+#ifndef BSP_TZ_CFG_ICUSARC
+#define BSP_TZ_CFG_ICUSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \
+            0xFFFFFF00U)
+#endif
+
+/* Security attribution registers for SELSR0. */
+#ifndef BSP_TZ_CFG_ICUSARD
+#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN0. */
+#ifndef BSP_TZ_CFG_ICUSARE
+#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU)
+#endif
+
+/* Security attribution registers for WUPEN1. */
+#ifndef BSP_TZ_CFG_ICUSARF
+#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU)
+#endif
+
+/* Set DTCSTSAR if the Secure program uses the DTC. */
+#if RA_NOT_DEFINED == RA_NOT_DEFINED
+#define BSP_TZ_CFG_DTC_USED (0U)
+#else
+ #define BSP_TZ_CFG_DTC_USED (1U)
+#endif
+
+/* Security attribution of FLWT and FCKMHZ registers. */
+#ifndef BSP_TZ_CFG_FSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no
+ * reason for nonsecure applications to access FLWT and FCKMHZ. */
+#if BSP_CFG_CLOCKS_SECURE
+/* Protect FLWT and FCKMHZ registers from nonsecure write access. */
+#define BSP_TZ_CFG_FSAR (0xFEFEU)
+#else
+/* Allow Secure and Non-secure write access. */
+#define BSP_TZ_CFG_FSAR (0xFFFFU)
+#endif
+#endif
+
+/* Security attribution for SRAM registers. */
+#ifndef BSP_TZ_CFG_SRAMSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access
+ * SRAM0WTEN and therefore there is no reason to access PRCR2. */
+#define BSP_TZ_CFG_SRAMSAR (\
+        1 | \
+        ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \
+        4 | \
+        0xFFFFFFF8U)
+#endif
+
+/* Security attribution for Standby RAM registers. */
+#ifndef BSP_TZ_CFG_STBRAMSAR
+#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U)
+#endif
+
+/* Security attribution for the DMAC Bus Master MPU settings. */
+#ifndef BSP_TZ_CFG_MMPUSARA
+/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */
+#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC)
+#endif
+
+/* Security Attribution Register A for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARA
+#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU)
+#endif
+/* Security Attribution Register B for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARB
+#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU)
+#endif
+
+/* Enable Uninitialized Non-Secure Application Fallback. */
+#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK
+#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U)
+#endif
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+
+/* Option Function Select Register 1 Security Attribution */
+#ifndef BSP_CFG_ROM_REG_OFS1_SEL
+#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE)
+            #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U))
+#else
+#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U)
+#endif
+#endif
+
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/* Dual Mode Select Register */
+#ifndef BSP_CFG_ROM_REG_DUALSEL
+#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U))
+#endif
+
+/* Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_BPS0
+#define BSP_CFG_ROM_REG_BPS0 (~( 0U))
+#endif
+/* Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_BPS1
+#define BSP_CFG_ROM_REG_BPS1 (~( 0U))
+#endif
+/* Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_BPS2
+#define BSP_CFG_ROM_REG_BPS2 (~( 0U))
+#endif
+/* Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_BPS3
+#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU)
+#endif
+/* Permanent Block Protection Register 0 */
+#ifndef BSP_CFG_ROM_REG_PBPS0
+#define BSP_CFG_ROM_REG_PBPS0 (~( 0U))
+#endif
+/* Permanent Block Protection Register 1 */
+#ifndef BSP_CFG_ROM_REG_PBPS1
+#define BSP_CFG_ROM_REG_PBPS1 (~( 0U))
+#endif
+/* Permanent Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_PBPS2
+#define BSP_CFG_ROM_REG_PBPS2 (~( 0U))
+#endif
+/* Permanent Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_PBPS3
+#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL0
+#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0)
+#endif
+/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL1
+#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1)
+#endif
+/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL2
+#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2)
+#endif
+/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL3
+#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3)
+#endif
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..0eb5e0516
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,37 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+
+#define BSP_CFG_CLOCKS_SECURE   (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ         (24000000)                         /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY  (2)                                /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV         (BSP_CLOCKS_PLL_DIV_3)             /* PLL Div /3 */
+#define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(25U,0U))       /* PLL Mul x25.0 */
+#define BSP_CFG_PLL2_SOURCE     (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV        (BSP_CLOCKS_PLL_DIV_2)             /* PLL2 Div /2 */
+#define BSP_CFG_PLL2_MUL        (BSP_CLOCKS_PLL_MUL(20U,0U))       /* PLL2 Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL)      /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* UCLK Src: PLL2 */
+#define BSP_CFG_U60CK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* U60CK Src: PLL2 */
+#define BSP_CFG_OCTA_SOURCE     (BSP_CLOCKS_CLOCK_DISABLED)        /* OCTASPICLK Disabled */
+#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED)        /* CANFDCLK Disabled */
+#define BSP_CFG_CECCLK_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CECCLK Disabled */
+#define BSP_CFG_ICLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT     (2)                                /* EBCLK Div /2 */
+#define BSP_CFG_FCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV      (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV         (BSP_CLOCKS_USB_CLOCK_DIV_5)       /* UCLK Div /5 */
+#define BSP_CFG_U60CK_DIV       (BSP_CLOCKS_USB60_CLOCK_DIV_4)     /* U60CK Div /4 */
+#define BSP_CFG_OCTA_DIV        (BSP_CLOCKS_OCTA_CLOCK_DIV_1)      /* OCTASPICLK Div /1 */
+#define BSP_CFG_CANFDCLK_DIV    (BSP_CLOCKS_CANFD_CLOCK_DIV_1)     /* CANFDCLK Div /1 */
+#define BSP_CFG_CECCLK_DIV      (BSP_CLOCKS_CEC_CLOCK_DIV_1)       /* CECCLK Div /1 */
+
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld
new file mode 100644
index 000000000..ba15588e6
--- /dev/null
+++ b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld
@@ -0,0 +1,25 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x80000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x200000;
+DATA_FLASH_START = 0x08000000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x0100A100;
+OPTION_SETTING_LENGTH = 0x100;
+OPTION_SETTING_S_START = 0x0100A200;
+OPTION_SETTING_S_LENGTH = 0x100;
+ID_CODE_START = 0x00000000;
+ID_CODE_LENGTH = 0x0;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x4000000;
+OSPI_DEVICE_0_START = 0x68000000;
+OSPI_DEVICE_0_LENGTH = 0x8000000;
+OSPI_DEVICE_1_START = 0x70000000;
+OSPI_DEVICE_1_LENGTH = 0x10000000;
+
+/* Board has bootloader */
+FLASH_IMAGE_START = 0x10000;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h
index ba3698f3d..c132387bc 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/board.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/board.h
@@ -37,7 +37,7 @@ extern "C" {
 #define SW1                   BSP_IO_PORT_01_PIN_05
 #define BUTTON_STATE_ACTIVE   0
 
-const ioport_pin_cfg_t board_pin_cfg[] = {
+static const ioport_pin_cfg_t board_pin_cfg[] = {
     {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
     {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
     // USB FS D+, D-, VBus
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
index 700d9b29f..11d5795df 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -4,6 +4,7 @@
 
 #include "bsp_clock_cfg.h"
 #include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
 
 #undef RA_NOT_DEFINED
 #define BSP_CFG_RTOS (0)
@@ -11,7 +12,7 @@
 #define BSP_CFG_BOOT_IMAGE (1)
 #endif
 #define BSP_CFG_MCU_VCC_MV (3300)
-#define BSP_CFG_STACK_MAIN_BYTES (0x400)
+#define BSP_CFG_STACK_MAIN_BYTES (0x800)
 #define BSP_CFG_HEAP_BYTES (0x1000)
 #define BSP_CFG_PARAM_CHECKING_ENABLE (1)
 #define BSP_CFG_ASSERT (0)
@@ -31,13 +32,4 @@
 #define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(1)
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
 
-#define BSP_FEATURE_BSP_HAS_SCISPI_CLOCK 0
-
-#define BSP_FEATURE_TFU_SUPPORTED 0
-#define BSP_TZ_SECURE_BUILD    (0)
-#define BSP_TZ_NONSECURE_BUILD (0)
-
-// for SystemInit()
-void bsp_init(void * p_args);
-
 #endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
index 3bde2db0d..72cdb89e6 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -12,16 +12,16 @@
 #define BSP_MOCO_HZ                 (8000000)
 #define BSP_SUB_CLOCK_HZ            (32768)
 #if   BSP_CFG_HOCO_FREQUENCY == 0
-#define BSP_HOCO_HZ             (24000000)
+  #define BSP_HOCO_HZ             (24000000)
 #elif BSP_CFG_HOCO_FREQUENCY == 2
-                #define BSP_HOCO_HZ             (32000000)
-            #elif BSP_CFG_HOCO_FREQUENCY == 4
-                #define BSP_HOCO_HZ             (48000000)
-            #elif BSP_CFG_HOCO_FREQUENCY == 5
-                #define BSP_HOCO_HZ             (64000000)
-            #else
-                #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
-            #endif
+  #define BSP_HOCO_HZ             (32000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 4
+  #define BSP_HOCO_HZ             (48000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 5
+  #define BSP_HOCO_HZ             (64000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
 #define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
 #define BSP_VECTOR_TABLE_MAX_ENTRIES       (48U)
 
diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
index 930fa3547..554126523 100644
--- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
+++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -7,7 +7,7 @@
 #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
 #define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */
 #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */
-#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL_8_0) /* PLL Mul x8 */
+#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */
 #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
 #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
 #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.h b/hw/bsp/ra/boards/ra4m3_ek/board.h
index c2f150b33..9dd2545a0 100644
--- a/hw/bsp/ra/boards/ra4m3_ek/board.h
+++ b/hw/bsp/ra/boards/ra4m3_ek/board.h
@@ -37,10 +37,10 @@ extern "C" {
 #define SW1  (BSP_IO_PORT_00_PIN_05)
 #define BUTTON_STATE_ACTIVE   0
 
-const ioport_pin_cfg_t board_pin_cfg[] = {
+static const ioport_pin_cfg_t board_pin_cfg[] = {
   {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
   {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
-    // USB FS D+, D-, VBus
+    // USB FS
   {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
   {.pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
   {.pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h
index a9cb8210b..862ec25b7 100644
--- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -1,21 +1,37 @@
 /* generated configuration header file - do not edit */
 #ifndef BSP_CFG_H_
 #define BSP_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
 
 #include "bsp_clock_cfg.h"
 #include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
 
-#undef RA_NOT_DEFINED
+#define RA_NOT_DEFINED 0
+#ifndef BSP_CFG_RTOS
+#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+#define BSP_CFG_RTOS (2)
+#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED)
+#define BSP_CFG_RTOS (1)
+#else
 #define BSP_CFG_RTOS (0)
+#endif
+#endif
+#ifndef BSP_CFG_RTC_USED
+#define BSP_CFG_RTC_USED (RA_NOT_DEFINED)
+#endif
+#undef RA_NOT_DEFINED
 #if defined(_RA_BOOT_IMAGE)
 #define BSP_CFG_BOOT_IMAGE (1)
 #endif
-#define BSP_CFG_MCU_VCC_MV	      (3300)
-#define BSP_CFG_STACK_MAIN_BYTES      (0x400)
-#define BSP_CFG_HEAP_BYTES	      (0x400)
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x800)
+#define BSP_CFG_HEAP_BYTES (0x800)
 #define BSP_CFG_PARAM_CHECKING_ENABLE (1)
-#define BSP_CFG_ASSERT		      (0)
-#define BSP_CFG_ERROR_LOG	      (0)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
 
 #define BSP_CFG_PFS_PROTECT ((1))
 
@@ -24,14 +40,24 @@
 
 #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
 
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED
 #define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1)
+#endif
 
-#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE	(0)
-#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE		(0)
-#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(1)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1)
+#endif
+#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+#endif
 
-// for SystemInit()
-void bsp_init(void * p_args);
-
+#ifdef __cplusplus
+}
+#endif
 #endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..444d32e56
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (4)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..1a0bc02e2
--- /dev/null
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA4M3AF3CFB
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (1048576)
+#define BSP_RAM_SIZE_BYTES (131072)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_LQFP
+#define BSP_PACKAGE_PINS (144)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
index 4ecda1c66..26e184a94 100644
--- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -1,129 +1,181 @@
-/* generated configuration header file through renesas e2 studio */
+/* generated configuration header file - do not edit */
 #ifndef BSP_MCU_FAMILY_CFG_H_
 #define BSP_MCU_FAMILY_CFG_H_
+#ifdef __cplusplus
+extern "C" {
+#endif
 
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h"
 #include "bsp_clock_cfg.h"
-#include "bsp_mcu_info.h"
-
-#define BSP_CFG_MCU_PART_SERIES (4)
-#define BSP_MCU_R7FA4M3AF3CFB
-#define BSP_ROM_SIZE_BYTES	  (1048576)
-#define BSP_RAM_SIZE_BYTES	  (131072)
-#define BSP_DATA_FLASH_SIZE_BYTES (8192)
-#define BSP_PACKAGE_LQFP
-#define BSP_PACKAGE_PINS (144)
-
 #define BSP_MCU_GROUP_RA4M3 (1)
-#define BSP_LOCO_HZ	    (32768)
-#define BSP_MOCO_HZ	    (8000000)
-#define BSP_SUB_CLOCK_HZ    (32768)
-#if BSP_CFG_HOCO_FREQUENCY == 0
-#define BSP_HOCO_HZ (16000000)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+#define BSP_HOCO_HZ                 (16000000)
 #elif BSP_CFG_HOCO_FREQUENCY == 1
-#define BSP_HOCO_HZ (18000000)
-#elif BSP_CFG_HOCO_FREQUENCY == 2
-#define BSP_HOCO_HZ (20000000)
-#else
-#error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
-#endif
+                #define BSP_HOCO_HZ                 (18000000)
+            #elif BSP_CFG_HOCO_FREQUENCY == 2
+                #define BSP_HOCO_HZ                 (20000000)
+            #else
+                #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+            #endif
 
-#define BSP_CFG_FLL_ENABLE (0)
+#define BSP_CFG_FLL_ENABLE                 (0)
 
-#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U)
-#define BSP_VECTOR_TABLE_MAX_ENTRIES	(112U)
-#define BSP_MCU_VBATT_SUPPORT		(1)
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (112U)
 
 #if defined(_RA_TZ_SECURE)
-#define BSP_TZ_SECURE_BUILD    (1)
-#define BSP_TZ_NONSECURE_BUILD (0)
-#elif defined(_RA_TZ_NONSECURE)
-#define BSP_TZ_SECURE_BUILD    (0)
-#define BSP_TZ_NONSECURE_BUILD (1)
-#else
-#define BSP_TZ_SECURE_BUILD    (0)
-#define BSP_TZ_NONSECURE_BUILD (0)
+            #define BSP_TZ_SECURE_BUILD           (1)
+            #define BSP_TZ_NONSECURE_BUILD        (0)
+            #elif defined(_RA_TZ_NONSECURE)
+            #define BSP_TZ_SECURE_BUILD           (0)
+            #define BSP_TZ_NONSECURE_BUILD        (1)
+            #else
+#define BSP_TZ_SECURE_BUILD           (0)
+#define BSP_TZ_NONSECURE_BUILD        (0)
 #endif
 
 /* TrustZone Settings */
-#define BSP_TZ_CFG_INIT_SECURE_ONLY   (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE))
-#define BSP_TZ_CFG_SKIP_INIT	      (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY)
-#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0)
+#define BSP_TZ_CFG_INIT_SECURE_ONLY       (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE))
+#define BSP_TZ_CFG_SKIP_INIT              (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY)
+#define BSP_TZ_CFG_EXCEPTION_RESPONSE     (0)
 
 /* CMSIS TrustZone Settings */
-#define SCB_CSR_AIRCR_INIT	   (1)
-#define SCB_AIRCR_BFHFNMINS_VAL	   (0)
-#define SCB_AIRCR_SYSRESETREQS_VAL (1)
-#define SCB_AIRCR_PRIS_VAL	   (0)
-#define TZ_FPU_NS_USAGE		   (1)
-#define SCB_NSACR_CP10_11_VAL	   (3U)
+#define SCB_CSR_AIRCR_INIT                (1)
+#define SCB_AIRCR_BFHFNMINS_VAL           (0)
+#define SCB_AIRCR_SYSRESETREQS_VAL        (1)
+#define SCB_AIRCR_PRIS_VAL                (0)
+#define TZ_FPU_NS_USAGE                   (1)
+#ifndef SCB_NSACR_CP10_11_VAL
+#define SCB_NSACR_CP10_11_VAL             (3U)
+#endif
 
-#define FPU_FPCCR_TS_VAL	(1U)
-#define FPU_FPCCR_CLRONRETS_VAL (1)
+#ifndef FPU_FPCCR_TS_VAL
+#define FPU_FPCCR_TS_VAL                  (1U)
+#endif
+#define FPU_FPCCR_CLRONRETS_VAL           (1)
 
-#define FPU_FPCCR_CLRONRET_VAL (1)
+#ifndef FPU_FPCCR_CLRONRET_VAL
+#define FPU_FPCCR_CLRONRET_VAL            (1)
+#endif
 
 /* The C-Cache line size that is configured during startup. */
-#define BSP_CFG_C_CACHE_LINE_SIZE (1U)
+#ifndef BSP_CFG_C_CACHE_LINE_SIZE
+#define BSP_CFG_C_CACHE_LINE_SIZE   (1U)
+#endif
 
 /* Type 1 Peripheral Security Attribution */
 
 /* Peripheral Security Attribution Register (PSAR) Settings */
-#define BSP_TZ_CFG_PSARB                                                                                             \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ |   \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ |   \
-   (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ |             \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | 0x33f4f9) /* Unused */
-#define BSP_TZ_CFG_PSARC                                                                                             \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ |     \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ |  \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | 0x7fffcef4) /* Unused */
-#define BSP_TZ_CFG_PSARD                                                                                               \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ |     \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ |     \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ |                \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ |     \
-   0xffae07f0) /* Unused */
-#define BSP_TZ_CFG_PSARE                                                                                             \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ |    \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ |   \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \
-   (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ |              \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ |              \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ |              \
-   (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | 0x3f3ff8) /* Unused */
-#define BSP_TZ_CFG_MSSAR                                                                                              \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \
-   0xfffffffc) /* Unused */
+#ifndef BSP_TZ_CFG_PSARB
+#define BSP_TZ_CFG_PSARB (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \
+            (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \
+            0x33f4f9) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARC
+#define BSP_TZ_CFG_PSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \
+            0x7fffcef4) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARD
+#define BSP_TZ_CFG_PSARD (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \
+            (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \
+            0xffae07f0) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_PSARE
+#define BSP_TZ_CFG_PSARE (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \
+            (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \
+            (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \
+            (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \
+            (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | \
+            0x3f3ff8) /* Unused */
+#endif
+#ifndef BSP_TZ_CFG_MSSAR
+#define BSP_TZ_CFG_MSSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \
+            0xfffffffc) /* Unused */
+#endif
 
 /* Type 2 Peripheral Security Attribution */
 
 /* Security attribution for Cache registers. */
+#ifndef BSP_TZ_CFG_CSAR
 #define BSP_TZ_CFG_CSAR (0xFFFFFFFFU)
+#endif
 
 /* Security attribution for RSTSRn registers. */
+#ifndef BSP_TZ_CFG_RSTSAR
 #define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU)
+#endif
 
 /* Security attribution for registers of LVD channels. */
-#define BSP_TZ_CFG_LVDSAR                                              \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \
-   0xFFFFFFFCU)
+#ifndef BSP_TZ_CFG_LVDSAR
+#define BSP_TZ_CFG_LVDSAR (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \
+            0xFFFFFFFCU)
+#endif
 
 /* Security attribution for LPM registers. */
+#ifndef BSP_TZ_CFG_LPMSAR
 #define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU)
+#endif
 /* Deep Standby Interrupt Factor Security Attribution Register. */
+#ifndef BSP_TZ_CFG_DPFSAR
 #define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU)
+#endif
 
 /* Security attribution for CGC registers. */
+#ifndef BSP_TZ_CFG_CGFSAR
 #if BSP_CFG_CLOCKS_SECURE
 /* Protect all CGC registers from Non-secure write access. */
 #define BSP_TZ_CFG_CGFSAR (0xFFFCE402U)
@@ -131,58 +183,78 @@
 /* Allow Secure and Non-secure write access. */
 #define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU)
 #endif
+#endif
 
 /* Security attribution for Battery Backup registers. */
+#ifndef BSP_TZ_CFG_BBFSAR
 #define BSP_TZ_CFG_BBFSAR (0x00FFFFFF)
+#endif
 
 /* Security attribution for registers for IRQ channels. */
-#define BSP_TZ_CFG_ICUSARA                                                                                                    \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ |                                                       \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ |   \
-   (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ |                                                     \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ |                                                     \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | 0xFFFF0000U)
+#ifndef BSP_TZ_CFG_ICUSARA
+#define BSP_TZ_CFG_ICUSARA (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \
+            (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \
+            (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \
+            0xFFFF0000U)
+#endif
 
 /* Security attribution for NMI registers. */
+#ifndef BSP_TZ_CFG_ICUSARB
 #define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */
+#endif
 
 /* Security attribution for registers for DMAC channels */
-#define BSP_TZ_CFG_ICUSARC                                               \
-  ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \
-   (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | 0xFFFFFF00U)
+#ifndef BSP_TZ_CFG_ICUSARC
+#define BSP_TZ_CFG_ICUSARC (\
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \
+            (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \
+            0xFFFFFF00U)
+#endif
 
 /* Security attribution registers for SELSR0. */
+#ifndef BSP_TZ_CFG_ICUSARD
 #define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU)
+#endif
 
 /* Security attribution registers for WUPEN0. */
+#ifndef BSP_TZ_CFG_ICUSARE
 #define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU)
+#endif
 
 /* Security attribution registers for WUPEN1. */
+#ifndef BSP_TZ_CFG_ICUSARF
 #define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU)
+#endif
 
 /* Set DTCSTSAR if the Secure program uses the DTC. */
-// #if RA_NOT_DEFINED == RA_NOT_DEFINED
+#if RA_NOT_DEFINED == RA_NOT_DEFINED
 #define BSP_TZ_CFG_DTC_USED (0U)
-// #else
-// #define BSP_TZ_CFG_DTC_USED (1U)
-// #endif
+#else
+ #define BSP_TZ_CFG_DTC_USED (1U)
+#endif
 
 /* Security attribution of FLWT and FCKMHZ registers. */
+#ifndef BSP_TZ_CFG_FSAR
 /* If the CGC registers are only accessible in Secure mode, than there is no
  * reason for nonsecure applications to access FLWT and FCKMHZ. */
 #if BSP_CFG_CLOCKS_SECURE
@@ -192,69 +264,123 @@
 /* Allow Secure and Non-secure write access. */
 #define BSP_TZ_CFG_FSAR (0xFFFFU)
 #endif
+#endif
 
 /* Security attribution for SRAM registers. */
-/* If the CGC registers are only accessible in Secure mode, than there is no
- * reason for Non Secure applications to access
+#ifndef BSP_TZ_CFG_SRAMSAR
+/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access
  * SRAM0WTEN and therefore there is no reason to access PRCR2. */
-#define BSP_TZ_CFG_SRAMSAR (1 | ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | 4 | 0xFFFFFFF8U)
+#define BSP_TZ_CFG_SRAMSAR (\
+        1 | \
+        ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \
+        4 | \
+        0xFFFFFFF8U)
+#endif
 
 /* Security attribution for Standby RAM registers. */
+#ifndef BSP_TZ_CFG_STBRAMSAR
 #define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U)
+#endif
 
 /* Security attribution for the DMAC Bus Master MPU settings. */
-/* The DMAC Bus Master MPU settings should align with the DMAC channel settings.
- */
+#ifndef BSP_TZ_CFG_MMPUSARA
+/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */
 #define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC)
+#endif
 
 /* Security Attribution Register A for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARA
 #define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU)
+#endif
 /* Security Attribution Register B for BUS Control registers. */
+#ifndef BSP_TZ_CFG_BUSSARB
 #define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU)
+#endif
+
+/* Enable Uninitialized Non-Secure Application Fallback. */
+#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK
+#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U)
+#endif
 
-#define OFS_SEQ1	     0xA001A001 | (1 << 1) | (3 << 2)
-#define OFS_SEQ2	     (15 << 4) | (3 << 8) | (3 << 10)
-#define OFS_SEQ3	     (1 << 12) | (1 << 14) | (1 << 17)
-#define OFS_SEQ4	     (3 << 18) | (15 << 20) | (3 << 24) | (3 << 26)
-#define OFS_SEQ5	     (1 << 28) | (1 << 30)
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
 #define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
 
 /* Option Function Select Register 1 Security Attribution */
+#ifndef BSP_CFG_ROM_REG_OFS1_SEL
 #if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE)
-#define BSP_CFG_ROM_REG_OFS1_SEL \
-  (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U))
+            #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U))
 #else
 #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U)
 #endif
+#endif
 
-#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8))
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) |  (1 << 8))
+
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
 
-/* Used to create IELS values for the interrupt initialization table
- * g_interrupt_event_link_select. */
-#define BSP_PRV_IELS_ENUM(vector) (ELC_##vector)
 /* Dual Mode Select Register */
+#ifndef BSP_CFG_ROM_REG_DUALSEL
 #define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU)
+#endif
+
 /* Block Protection Register 0 */
-#define BSP_CFG_ROM_REG_BPS0 (~(0U))
+#ifndef BSP_CFG_ROM_REG_BPS0
+#define BSP_CFG_ROM_REG_BPS0 (~( 0U))
+#endif
 /* Block Protection Register 1 */
-#define BSP_CFG_ROM_REG_BPS1 (~(0U))
+#ifndef BSP_CFG_ROM_REG_BPS1
+#define BSP_CFG_ROM_REG_BPS1 (~( 0U))
+#endif
 /* Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_BPS2
 #define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU)
+#endif
+/* Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_BPS3
+#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU)
+#endif
 /* Permanent Block Protection Register 0 */
-#define BSP_CFG_ROM_REG_PBPS0 (~(0U))
+#ifndef BSP_CFG_ROM_REG_PBPS0
+#define BSP_CFG_ROM_REG_PBPS0 (~( 0U))
+#endif
 /* Permanent Block Protection Register 1 */
-#define BSP_CFG_ROM_REG_PBPS1 (~(0U))
+#ifndef BSP_CFG_ROM_REG_PBPS1
+#define BSP_CFG_ROM_REG_PBPS1 (~( 0U))
+#endif
 /* Permanent Block Protection Register 2 */
+#ifndef BSP_CFG_ROM_REG_PBPS2
 #define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU)
-/* Security Attribution for Block Protection Register 0 (If any blocks are
- * marked as protected in the secure application, then mark them as secure) */
+#endif
+/* Permanent Block Protection Register 3 */
+#ifndef BSP_CFG_ROM_REG_PBPS3
+#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL0
 #define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0)
-/* Security Attribution for Block Protection Register 1 (If any blocks are
- * marked as protected in the secure application, then mark them as secure) */
+#endif
+/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL1
 #define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1)
-/* Security Attribution for Block Protection Register 2 (If any blocks are
- * marked as protected in the secure application, then mark them as secure) */
-#define BSP_CFG_ROM_REG_BPS_SEL2    (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL2
+#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU)
+#endif
+/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */
+#ifndef BSP_CFG_ROM_REG_BPS_SEL3
+#define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU)
+#endif
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
 #define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
 
+#ifdef __cplusplus
+}
+#endif
 #endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h
index 4f490f340..80641945d 100644
--- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h
+++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h
@@ -1,27 +1,25 @@
 /* generated configuration header file - do not edit */
 #ifndef BSP_CLOCK_CFG_H_
 #define BSP_CLOCK_CFG_H_
-
-#define BSP_CFG_CLOCKS_SECURE	(0)
+#define BSP_CFG_CLOCKS_SECURE (0)
 #define BSP_CFG_CLOCKS_OVERRIDE (0)
-#define BSP_CFG_XTAL_HZ		(24000000)			   /* XTAL 24000000Hz */
-#define BSP_CFG_HOCO_FREQUENCY	(2)				   /* HOCO 20MHz */
-#define BSP_CFG_PLL_SOURCE	(BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
-#define BSP_CFG_PLL_DIV		(BSP_CLOCKS_PLL_DIV_3)		   /* PLL Div /3 */
-#define BSP_CFG_PLL_MUL		BSP_CLOCKS_PLL_MUL_24_0		   /* PLL Mul x24.0 */
-#define BSP_CFG_PLL2_SOURCE	(BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
-#define BSP_CFG_PLL2_DIV	(BSP_CLOCKS_PLL_DIV_3)		   /* PLL2 Div /3 */
-#define BSP_CFG_PLL2_MUL	BSP_CLOCKS_PLL_MUL_24_0		   /* PLL2 Mul x24.0 */
-#define BSP_CFG_CLOCK_SOURCE	(BSP_CLOCKS_SOURCE_CLOCK_PLL)	   /* Clock Src: PLL */
-#define BSP_CFG_CLKOUT_SOURCE	(BSP_CLOCKS_CLOCK_DISABLED)	   /* CLKOUT Disabled */
-#define BSP_CFG_UCK_SOURCE	(BSP_CLOCKS_SOURCE_CLOCK_PLL2)	   /* UCLK Src: PLL2 */
-#define BSP_CFG_ICLK_DIV	(BSP_CLOCKS_SYS_CLOCK_DIV_2)	   /* ICLK Div /2 */
-#define BSP_CFG_PCLKA_DIV	(BSP_CLOCKS_SYS_CLOCK_DIV_2)	   /* PCLKA Div /2 */
-#define BSP_CFG_PCLKB_DIV	(BSP_CLOCKS_SYS_CLOCK_DIV_4)	   /* PCLKB Div /4 */
-#define BSP_CFG_PCLKC_DIV	(BSP_CLOCKS_SYS_CLOCK_DIV_4)	   /* PCLKC Div /4 */
-#define BSP_CFG_PCLKD_DIV	(BSP_CLOCKS_SYS_CLOCK_DIV_2)	   /* PCLKD Div /2 */
-#define BSP_CFG_FCLK_DIV	(BSP_CLOCKS_SYS_CLOCK_DIV_4)	   /* FCLK Div /4 */
-#define BSP_CFG_CLKOUT_DIV	(BSP_CLOCKS_SYS_CLOCK_DIV_1)	   /* CLKOUT Div /1 */
-#define BSP_CFG_UCK_DIV		(BSP_CLOCKS_USB_CLOCK_DIV_4)	   /* UCLK Div /4 */
-
+#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL Mul x24.0 */
+#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */
+#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL2 Mul x24.0 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */
 #endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h
index 0b7297fd4..f73a08fc0 100644
--- a/hw/bsp/ra/boards/ra6m1_ek/board.h
+++ b/hw/bsp/ra/boards/ra6m1_ek/board.h
@@ -37,13 +37,11 @@ extern "C" {
 #define SW1                   BSP_IO_PORT_04_PIN_15
 #define BUTTON_STATE_ACTIVE   0
 
-const ioport_pin_cfg_t board_pin_cfg[] = {
-    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
-    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
-    // USB FS D+, D-, VBus
-    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
-    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
-    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT },
+    { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
+    // USB FS
+    { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS },
 };
 
 #ifdef __cplusplus
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
index c2b23b16c..772e5e5b1 100644
--- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -8,6 +8,7 @@ extern "C" {
 
 #include "bsp_clock_cfg.h"
 #include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
 
 #define RA_NOT_DEFINED 0
 #ifndef BSP_CFG_RTOS
@@ -30,7 +31,7 @@ extern "C" {
 #endif
 
 #define BSP_CFG_MCU_VCC_MV (3300)
-#define BSP_CFG_STACK_MAIN_BYTES (0x400)
+#define BSP_CFG_STACK_MAIN_BYTES (0x1000)
 #define BSP_CFG_HEAP_BYTES (0x1000)
 #define BSP_CFG_PARAM_CHECKING_ENABLE (1)
 #define BSP_CFG_ASSERT (0)
@@ -60,16 +61,6 @@ extern "C" {
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
 #endif
 
-#define BSP_FEATURE_BSP_HAS_SCISPI_CLOCK 0
-#define BSP_FEATURE_TFU_SUPPORTED 0
-#define BSP_TZ_SECURE_BUILD    (0)
-#define BSP_TZ_NONSECURE_BUILD (0)
-
-#define BSP_CFG_USE_LOW_VOLTAGE_MODE 0
-
-// for SystemInit()
-void bsp_init(void * p_args);
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
index 1cdfae949..945a6010b 100644
--- a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
+++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h
@@ -7,7 +7,7 @@
 #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
 #define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
 #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_1) /* PLL Div /1 */
-#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL_20_0 /* PLL Mul x20.0 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL Mul x20.0 */
 #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
 #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */
 #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake
index 42a4c7417..c91d48a32 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/board.cmake
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake
@@ -3,8 +3,20 @@ set(MCU_VARIANT ra6m5)
 
 set(JLINK_DEVICE R7FA6M5BH)
 
+# Device port default to PORT1 Highspeed
+if (NOT DEFINED PORT)
+set(PORT 1)
+endif()
+
+# Host port will be the other port
+set(HOST_PORT $<NOT:${PORT}>)
+
 function(update_board TARGET)
-#  target_compile_definitions(${TARGET} PUBLIC)
-#  target_sources(${TARGET} PRIVATE)
-#  target_include_directories(${BOARD_TARGET} PUBLIC)
+  target_compile_definitions(${TARGET} PUBLIC
+    BOARD_TUD_RHPORT=${PORT}
+    BOARD_TUH_RHPORT=${HOST_PORT}
+    # port 0 is fullspeed, port 1 is highspeed
+    BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED>
+    )
 endfunction()
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h
index 87434630f..779f71810 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/board.h
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.h
@@ -37,26 +37,28 @@ extern "C" {
 #define SW1                   BSP_IO_PORT_00_PIN_05
 #define BUTTON_STATE_ACTIVE   0
 
-const ioport_pin_cfg_t board_pin_cfg[] = {
+static const ioport_pin_cfg_t board_pin_cfg[] = {
     { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW },
     { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT },
 
-    // USB FS D+, D-, VBus
+    // USB FS
     { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH },
     { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
     { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH},
 
-    // USB HS D+, D-, VBus
+    // USB HS
     { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS },
     { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
     { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH},
 
     // ETM Trace
-    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
-    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE },
+    #ifdef TRACE_ETM
+    { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+    { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH },
+     #endif
 };
 
 #ifdef __cplusplus
diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.mk b/hw/bsp/ra/boards/ra6m5_ek/board.mk
index 567908b63..a5c933764 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/board.mk
+++ b/hw/bsp/ra/boards/ra6m5_ek/board.mk
@@ -4,4 +4,7 @@ MCU_VARIANT = ra6m5
 # For flash-jlink target
 JLINK_DEVICE = R7FA6M5BH
 
+# Port 1 is highspeed
+PORT ?= 1
+
 flash: flash-jlink
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h
index e41f603ad..33d381850 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h
@@ -7,6 +7,7 @@ extern "C" {
 
 #include "bsp_clock_cfg.h"
 #include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
 
 #define RA_NOT_DEFINED 0
 #ifndef BSP_CFG_RTOS
@@ -26,7 +27,7 @@ extern "C" {
   #define BSP_CFG_BOOT_IMAGE (1)
 #endif
 #define BSP_CFG_MCU_VCC_MV (3300)
-#define BSP_CFG_STACK_MAIN_BYTES (0x400)
+#define BSP_CFG_STACK_MAIN_BYTES (0x1000)
 #define BSP_CFG_HEAP_BYTES (0x1000)
 #define BSP_CFG_PARAM_CHECKING_ENABLE (1)
 #define BSP_CFG_ASSERT (0)
@@ -56,9 +57,6 @@ extern "C" {
 #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
 #endif
 
-// for SystemInit()
-void bsp_init(void * p_args);
-
 #ifdef __cplusplus
 }
 #endif
diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
index 77ac41d0a..0eb5e0516 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
+++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h
@@ -1,35 +1,37 @@
 /* generated configuration header file - do not edit */
 #ifndef BSP_CLOCK_CFG_H_
 #define BSP_CLOCK_CFG_H_
-#define BSP_CFG_CLOCKS_SECURE (0)
+
+#define BSP_CFG_CLOCKS_SECURE   (0)
 #define BSP_CFG_CLOCKS_OVERRIDE (0)
-#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */
-#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */
-#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
-#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */
-#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL_25_0 /* PLL Mul x25.0 */
-#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
-#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */
-#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL_20_0 /* PLL2 Mul x20.0 */
-#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */
-#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */
-#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */
-#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* U60CK Disabled */
-#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */
-#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */
-#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */
-#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
-#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */
-#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */
-#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */
-#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */
-#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */
-#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */
-#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */
-#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
-#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */
-#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_1) /* U60CK Div /1 */
-#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */
-#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */
-#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */
+#define BSP_CFG_XTAL_HZ         (24000000)                         /* XTAL 24000000Hz */
+#define BSP_CFG_HOCO_FREQUENCY  (2)                                /* HOCO 20MHz */
+#define BSP_CFG_PLL_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */
+#define BSP_CFG_PLL_DIV         (BSP_CLOCKS_PLL_DIV_3)             /* PLL Div /3 */
+#define BSP_CFG_PLL_MUL         (BSP_CLOCKS_PLL_MUL(25U,0U))       /* PLL Mul x25.0 */
+#define BSP_CFG_PLL2_SOURCE     (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */
+#define BSP_CFG_PLL2_DIV        (BSP_CLOCKS_PLL_DIV_2)             /* PLL2 Div /2 */
+#define BSP_CFG_PLL2_MUL        (BSP_CLOCKS_PLL_MUL(20U,0U))       /* PLL2 Mul x20.0 */
+#define BSP_CFG_CLOCK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL)      /* Clock Src: PLL */
+#define BSP_CFG_CLKOUT_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CLKOUT Disabled */
+#define BSP_CFG_UCK_SOURCE      (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* UCLK Src: PLL2 */
+#define BSP_CFG_U60CK_SOURCE    (BSP_CLOCKS_SOURCE_CLOCK_PLL2)     /* U60CK Src: PLL2 */
+#define BSP_CFG_OCTA_SOURCE     (BSP_CLOCKS_CLOCK_DISABLED)        /* OCTASPICLK Disabled */
+#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED)        /* CANFDCLK Disabled */
+#define BSP_CFG_CECCLK_SOURCE   (BSP_CLOCKS_CLOCK_DISABLED)        /* CECCLK Disabled */
+#define BSP_CFG_ICLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKA Div /2 */
+#define BSP_CFG_PCLKB_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKB Div /4 */
+#define BSP_CFG_PCLKC_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* PCLKC Div /4 */
+#define BSP_CFG_PCLKD_DIV       (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* PCLKD Div /2 */
+#define BSP_CFG_BCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_2)       /* BCLK Div /2 */
+#define BSP_CFG_BCLK_OUTPUT     (2)                                /* EBCLK Div /2 */
+#define BSP_CFG_FCLK_DIV        (BSP_CLOCKS_SYS_CLOCK_DIV_4)       /* FCLK Div /4 */
+#define BSP_CFG_CLKOUT_DIV      (BSP_CLOCKS_SYS_CLOCK_DIV_1)       /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_DIV         (BSP_CLOCKS_USB_CLOCK_DIV_5)       /* UCLK Div /5 */
+#define BSP_CFG_U60CK_DIV       (BSP_CLOCKS_USB60_CLOCK_DIV_4)     /* U60CK Div /4 */
+#define BSP_CFG_OCTA_DIV        (BSP_CLOCKS_OCTA_CLOCK_DIV_1)      /* OCTASPICLK Div /1 */
+#define BSP_CFG_CANFDCLK_DIV    (BSP_CLOCKS_CANFD_CLOCK_DIV_1)     /* CANFDCLK Div /1 */
+#define BSP_CFG_CECCLK_DIV      (BSP_CLOCKS_CEC_CLOCK_DIV_1)       /* CECCLK Div /1 */
+
 #endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
index fa55d40b2..7b8ee9c95 100644
--- a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
+++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug
@@ -20,7 +20,9 @@ void OnProjectLoad (void) {
   Project.SetTraceSource ("Trace Pins");
   Project.SetTracePortWidth (4);
 
-  File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf");
+  //File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf");
+  //File.Open ("../../../../../../examples/dual/cmake-build-ra6m5/host_hid_to_device_cdc/host_hid_to_device_cdc.elf");
+  File.Open ("../../../../../../examples/cmake-build-ra6m5/host/cdc_msc_hid/cdc_msc_hid.elf");
 }
 /*********************************************************************
 *
@@ -29,7 +31,76 @@ void OnProjectLoad (void) {
 **********************************************************************
 */
 void BeforeTargetConnect (void) {
-  //
   // Trace pin init is done by J-Link script file as J-Link script files are IDE independent
-  //
+	Project.SetJLinkScript("../../../debug.jlinkscript");
+}
+
+/*********************************************************************
+*
+*       AfterTargetReset
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetReset (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr != 0xFFFFFFFF) {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+  } else {
+    Util.Log("Project file error: failed to get program base");
+  }
+
+  PC = Elf.GetEntryPointPC();
+
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else if (VectorTableAddr != 0xFFFFFFFF) {
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
+}
+
+/*********************************************************************
+*
+*      AfterTargetDownload
+*
+* Function description
+*   Event handler routine.
+*    - Sets the PC register to program reset value.
+*    - Sets the SP register to program reset value on Cortex-M.
+*
+**********************************************************************
+*/
+void AfterTargetDownload (void) {
+  unsigned int SP;
+  unsigned int PC;
+  unsigned int VectorTableAddr;
+
+  VectorTableAddr = Elf.GetBaseAddr();
+
+  if (VectorTableAddr != 0xFFFFFFFF) {
+    SP = Target.ReadU32(VectorTableAddr);
+    Target.SetReg("SP", SP);
+  } else {
+    Util.Log("Project file error: failed to get program base");
+  }
+
+  PC = Elf.GetEntryPointPC();
+
+  if (PC != 0xFFFFFFFF) {
+    Target.SetReg("PC", PC);
+  } else if (VectorTableAddr != 0xFFFFFFFF) {
+    PC = Target.ReadU32(VectorTableAddr + 4);
+    Target.SetReg("PC", PC);
+  }
 }
diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake
new file mode 100644
index 000000000..34780d776
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/board.cmake
@@ -0,0 +1,11 @@
+set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor")
+set(MCU_VARIANT ra4m1)
+
+set(JLINK_DEVICE R7FA4M1AB)
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld)
+
+function(update_board TARGET)
+#  target_compile_definitions(${TARGET} PUBLIC)
+#  target_sources(${TARGET} PRIVATE)
+#  target_include_directories(${BOARD_TARGET} PUBLIC)
+endfunction()
diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h
new file mode 100644
index 000000000..72abda27f
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/board.h
@@ -0,0 +1,53 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define LED1          BSP_IO_PORT_01_PIN_11 // D13
+#define LED_STATE_ON  1
+
+#define SW1                   BSP_IO_PORT_01_PIN_10 // D12
+#define BUTTON_STATE_ACTIVE   0
+
+static const ioport_pin_cfg_t board_pin_cfg[] = {
+    {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT},
+    {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT},
+    // USB FS D+, D-, VBus
+    {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+    {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS},
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk
new file mode 100644
index 000000000..b7075eec0
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/board.mk
@@ -0,0 +1,9 @@
+CPU_CORE = cortex-m4
+MCU_VARIANT = ra4m1
+
+LD_FILE = ${BOARD_PATH}/${BOARD}.ld
+
+# For flash-jlink target
+JLINK_DEVICE = R7FA4M1AB
+
+flash: flash-jlink
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h
new file mode 100644
index 000000000..c1d1022cc
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h
@@ -0,0 +1,35 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CFG_H_
+#define BSP_CFG_H_
+
+#include "bsp_clock_cfg.h"
+#include "bsp_mcu_family_cfg.h"
+#include "board_cfg.h"
+
+#undef RA_NOT_DEFINED
+#define BSP_CFG_RTOS (0)
+#if defined(_RA_BOOT_IMAGE)
+#define BSP_CFG_BOOT_IMAGE (1)
+#endif
+#define BSP_CFG_MCU_VCC_MV (3300)
+#define BSP_CFG_STACK_MAIN_BYTES (0x800)
+#define BSP_CFG_HEAP_BYTES (0x1000)
+#define BSP_CFG_PARAM_CHECKING_ENABLE (1)
+#define BSP_CFG_ASSERT (0)
+#define BSP_CFG_ERROR_LOG (0)
+
+#define BSP_CFG_PFS_PROTECT ((1))
+
+#define BSP_CFG_C_RUNTIME_INIT ((1))
+#define BSP_CFG_EARLY_INIT     ((0))
+
+#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0))
+
+#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0)
+
+#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE	(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE		(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED	(0)
+#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000
+
+#endif /* BSP_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h
new file mode 100644
index 000000000..444d32e56
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h
@@ -0,0 +1,5 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_CFG_H_
+#define BSP_MCU_DEVICE_CFG_H_
+#define BSP_CFG_MCU_PART_SERIES (4)
+#endif /* BSP_MCU_DEVICE_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
new file mode 100644
index 000000000..336918800
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h
@@ -0,0 +1,11 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_DEVICE_PN_CFG_H_
+#define BSP_MCU_R7FA4M1AB3CNE
+#define BSP_MCU_FEATURE_SET ('A')
+#define BSP_ROM_SIZE_BYTES (262144)
+#define BSP_RAM_SIZE_BYTES (32768)
+#define BSP_DATA_FLASH_SIZE_BYTES (8192)
+#define BSP_PACKAGE_QFN
+#define BSP_PACKAGE_PINS (48)
+#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h
new file mode 100644
index 000000000..fc604eb3b
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h
@@ -0,0 +1,87 @@
+/* generated configuration header file through renesas e2 studio */
+#ifndef BSP_MCU_FAMILY_CFG_H_
+#define BSP_MCU_FAMILY_CFG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "bsp_mcu_device_pn_cfg.h"
+#include "bsp_mcu_device_cfg.h"
+#include "bsp_mcu_info.h"
+#include "bsp_clock_cfg.h"
+
+#define BSP_MCU_GROUP_RA4M1 (1)
+#define BSP_LOCO_HZ                 (32768)
+#define BSP_MOCO_HZ                 (8000000)
+#define BSP_SUB_CLOCK_HZ            (32768)
+#if   BSP_CFG_HOCO_FREQUENCY == 0
+  #define BSP_HOCO_HZ             (24000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 2
+  #define BSP_HOCO_HZ             (32000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 4
+  #define BSP_HOCO_HZ             (48000000)
+#elif BSP_CFG_HOCO_FREQUENCY == 5
+  #define BSP_HOCO_HZ             (64000000)
+#else
+  #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h"
+#endif
+#define BSP_CORTEX_VECTOR_TABLE_ENTRIES    (16U)
+#define BSP_VECTOR_TABLE_MAX_ENTRIES       (48U)
+#define BSP_MCU_VBATT_SUPPORT       (1)
+
+#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2)
+#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10)
+#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17)
+#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26)
+#define OFS_SEQ5 (1 << 28) | (1 << 30)
+#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5)
+#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8))
+#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0))
+#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF)
+#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1)
+#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC)
+#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF)
+#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT
+#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9)
+#endif
+/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */
+#define BSP_PRV_IELS_ENUM(vector)    (ELC_ ## vector)
+
+/*
+ ID Code
+ Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings.
+ WARNING: This will disable debug access to the part and cannot be reversed by a debug probe.
+ */
+#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED)
+            #define BSP_CFG_ID_CODE_LONG_1 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_2 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_3 (0x00000000)
+            #define BSP_CFG_ID_CODE_LONG_4 (0x00000000)
+            #else
+/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */
+#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF)
+#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BSP_MCU_FAMILY_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h
new file mode 100644
index 000000000..63618ec4b
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h
@@ -0,0 +1,21 @@
+/* generated configuration header file - do not edit */
+#ifndef BSP_CLOCK_CFG_H_
+#define BSP_CLOCK_CFG_H_
+#define BSP_CFG_CLOCKS_SECURE (0)
+#define BSP_CFG_CLOCKS_OVERRIDE (0)
+#define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */
+#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */
+#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */
+#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */
+#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */
+#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */
+#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */
+#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */
+#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */
+#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */
+#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */
+#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */
+#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */
+#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */
+#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */
+#endif /* BSP_CLOCK_CFG_H_ */
diff --git a/hw/bsp/ra/boards/uno_r4/uno_r4.ld b/hw/bsp/ra/boards/uno_r4/uno_r4.ld
new file mode 100644
index 000000000..45f11dfb1
--- /dev/null
+++ b/hw/bsp/ra/boards/uno_r4/uno_r4.ld
@@ -0,0 +1,25 @@
+RAM_START = 0x20000000;
+RAM_LENGTH = 0x8000;
+FLASH_START = 0x00000000;
+FLASH_LENGTH = 0x40000;
+DATA_FLASH_START = 0x40100000;
+DATA_FLASH_LENGTH = 0x2000;
+OPTION_SETTING_START = 0x00000000;
+OPTION_SETTING_LENGTH = 0x0;
+OPTION_SETTING_S_START = 0x80000000;
+OPTION_SETTING_S_LENGTH = 0x0;
+ID_CODE_START = 0x01010018;
+ID_CODE_LENGTH = 0x20;
+SDRAM_START = 0x80010000;
+SDRAM_LENGTH = 0x0;
+QSPI_FLASH_START = 0x60000000;
+QSPI_FLASH_LENGTH = 0x0;
+OSPI_DEVICE_0_START = 0x80020000;
+OSPI_DEVICE_0_LENGTH = 0x0;
+OSPI_DEVICE_1_START = 0x80030000;
+OSPI_DEVICE_1_LENGTH = 0x0;
+
+/* Uno R4 has bootloader */
+FLASH_IMAGE_START = 0x4000;
+
+INCLUDE fsp.ld
diff --git a/hw/bsp/ra/debug.jlinkscript b/hw/bsp/ra/debug.jlinkscript
new file mode 100644
index 000000000..b34cfaa7f
--- /dev/null
+++ b/hw/bsp/ra/debug.jlinkscript
@@ -0,0 +1,4 @@
+int SetupTarget(void) {
+  JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x80000");
+  return 0;
+}
diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c
index 6a4e14e86..0aa58d86d 100644
--- a/hw/bsp/ra/family.c
+++ b/hw/bsp/ra/family.c
@@ -36,22 +36,19 @@
 #endif
 
 #include "bsp_api.h"
+#include "r_ioport.h"
+#include "r_ioport_api.h"
+#include "renesas.h"
 
 #ifdef __GNUC__
 #pragma GCC diagnostic pop
 #endif
 
-#include "r_ioport.h"
-#include "r_ioport_api.h"
-#include "renesas.h"
-
 #include "bsp/board_api.h"
 #include "board.h"
 
 /* Key code for writing PRCR register. */
-#define BSP_PRV_PRCR_KEY	       (0xA500U)
-#define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U)
-#define BSP_PRV_PRCR_LOCK	       ((BSP_PRV_PRCR_KEY) | 0x0U)
+#define BSP_PRV_PRCR_KEY         (0xA500U)
 
 static const ioport_cfg_t family_pin_cfg = {
     .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t),
@@ -63,43 +60,58 @@ static ioport_instance_ctrl_t port_ctrl;
 // Vector Data
 //--------------------------------------------------------------------+
 
-BSP_DONT_REMOVE const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = {
+BSP_DONT_REMOVE BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS)
+const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] = {
     [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */
     [1] = usbfs_resume_handler,    /* USBFS RESUME (USBFS resume interrupt) */
     [2] = usbfs_d0fifo_handler,    /* USBFS FIFO 0 (DMA transfer request 0) */
     [3] = usbfs_d1fifo_handler,    /* USBFS FIFO 1 (DMA transfer request 1) */
+
+#ifdef BOARD_HAS_USB_HIGHSPEED
+    [4] = usbhs_interrupt_handler, /* USBHS INT (USBHS interrupt) */
+    [5] = usbhs_d0fifo_handler,    /* USBHS FIFO 0 (DMA transfer request 0) */
+    [6] = usbhs_d1fifo_handler,    /* USBHS FIFO 1 (DMA transfer request 1) */
+#endif
 };
+
 const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = {
-    [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT),    /* USBFS INT (USBFS interrupt) */
-    [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */
-    [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */
-    [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1)  /* USBFS FIFO 1 (DMA transfer request 1) */
+    [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT),            /* USBFS INT (USBFS interrupt) */
+    [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME),         /* USBFS RESUME (USBFS resume interrupt) */
+    [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0),         /* USBFS FIFO 0 (DMA transfer request 0) */
+    [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1),         /* USBFS FIFO 1 (DMA transfer request 1) */
+
+#ifdef BOARD_HAS_USB_HIGHSPEED
+    [4] = BSP_PRV_IELS_ENUM(EVENT_USBHS_USB_INT_RESUME), /* USBHS USB INT RESUME (USBHS interrupt) */
+    [5] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_0),         /* USBHS FIFO 0 (DMA transfer request 0) */
+    [6] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_1),         /* USBHS FIFO 1 (DMA transfer request 1) */
+#endif
 };
 
 //--------------------------------------------------------------------+
 // Board porting API
 //--------------------------------------------------------------------+
 
-void board_init(void)
-{
+void board_init(void) {
+  // Enable global interrupts in CPSR register since board with bootloader such as Arduino Uno R4
+  // can transfer CPU control with CPSR.I bit set to 0 (disable IRQ)
+  __enable_irq();
+
   /* Configure pins. */
   R_IOPORT_Open(&port_ctrl, &family_pin_cfg);
 
 #ifdef TRACE_ETM
-  // Enable trace clock with div 1 (100 Mhz)
-  R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk;
-#endif
+  // TRCKCR is protected by PRCR bit0 register
+  R_SYSTEM->PRCR = (uint16_t) (BSP_PRV_PRCR_KEY | 0x01);
 
-  board_led_write(false);
+  // Enable trace clock (max 100Mhz). Since PLL/CPU is 200Mhz, clock div = 2
+  R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk | 0x01;
 
-  /* Enable USB_BASE */
-  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK;
-  R_MSTP->MSTPCRB &= ~(1U << 11U);
-  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK;
+  R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_KEY;
+#endif
 
 #if CFG_TUSB_OS == OPT_OS_FREERTOS
   // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
+  NVIC_SetPriority(USBFS_INT_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
   NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
   NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
   NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
@@ -108,6 +120,15 @@ void board_init(void)
 #if CFG_TUSB_OS == OPT_OS_NONE
   SysTick_Config(SystemCoreClock / 1000);
 #endif
+
+  board_led_write(false);
+}
+
+void board_init_after_tusb(void) {
+  // For board that use USB LDO regulator
+#if defined(BOARD_UNO_R4)
+  R_USB_FS0->USBMC |= R_USB_FS0_USBMC_VDCEN_Msk;
+#endif
 }
 
 void board_led_write(bool state) {
@@ -115,7 +136,7 @@ void board_led_write(bool state) {
 }
 
 uint32_t board_button_read(void) {
-  bsp_io_level_t lvl;
+  bsp_io_level_t lvl = !BUTTON_STATE_ACTIVE;
   R_IOPORT_PinRead(&port_ctrl, SW1, &lvl);
   return lvl == BUTTON_STATE_ACTIVE;
 }
@@ -142,66 +163,93 @@ void SysTick_Handler(void) {
 uint32_t board_millis(void) {
   return system_ticks;
 }
+
 #endif
 
 //--------------------------------------------------------------------+
 // Forward USB interrupt events to TinyUSB IRQ Handler
 //--------------------------------------------------------------------+
-void usbfs_interrupt_handler(void)
-{
+
+#if CFG_TUD_ENABLED && defined(BOARD_TUD_RHPORT)
+  #define PORT_SUPPORT_DEVICE(_n)  (BOARD_TUD_RHPORT == _n)
+#else
+  #define PORT_SUPPORT_DEVICE(_n)  0
+#endif
+
+#if CFG_TUH_ENABLED && defined(BOARD_TUH_RHPORT)
+  #define PORT_SUPPORT_HOST(_n)    (BOARD_TUH_RHPORT == _n)
+#else
+  #define PORT_SUPPORT_HOST(_n)    0
+#endif
+
+//------------- USB0 FullSpeed -------------//
+void usbfs_interrupt_handler(void) {
   IRQn_Type irq = R_FSP_CurrentIrqGet();
   R_BSP_IrqStatusClear(irq);
 
-#if CFG_TUH_ENABLED
+  #if PORT_SUPPORT_HOST(0)
   tuh_int_handler(0);
-#endif
+  #endif
 
-#if CFG_TUD_ENABLED
+  #if PORT_SUPPORT_DEVICE(0)
   tud_int_handler(0);
-#endif
+  #endif
 }
 
-void usbfs_resume_handler(void)
-{
+void usbfs_resume_handler(void) {
   IRQn_Type irq = R_FSP_CurrentIrqGet();
   R_BSP_IrqStatusClear(irq);
 
-#if CFG_TUH_ENABLED
+  #if PORT_SUPPORT_HOST(0)
   tuh_int_handler(0);
-#endif
+  #endif
 
-#if CFG_TUD_ENABLED
+  #if PORT_SUPPORT_DEVICE(0)
   tud_int_handler(0);
-#endif
+  #endif
 }
 
-void usbfs_d0fifo_handler(void)
-{
+void usbfs_d0fifo_handler(void) {
   IRQn_Type irq = R_FSP_CurrentIrqGet();
   R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
 
-#if CFG_TUH_ENABLED
-  tuh_int_handler(0);
-#endif
+void usbfs_d1fifo_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
 
-#if CFG_TUD_ENABLED
-  tud_int_handler(0);
-#endif
+//------------- USB1 HighSpeed -------------//
+#ifdef BOARD_HAS_USB_HIGHSPEED
+
+void usbhs_interrupt_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+
+  #if PORT_SUPPORT_HOST(1)
+  tuh_int_handler(1);
+  #endif
+
+  #if PORT_SUPPORT_DEVICE(1)
+  tud_int_handler(1);
+  #endif
 }
 
-void usbfs_d1fifo_handler(void)
-{
+void usbhs_d0fifo_handler(void) {
   IRQn_Type irq = R_FSP_CurrentIrqGet();
   R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
 
-#if CFG_TUH_ENABLED
-  tuh_int_handler(0);
-#endif
+void usbhs_d1fifo_handler(void) {
+  IRQn_Type irq = R_FSP_CurrentIrqGet();
+  R_BSP_IrqStatusClear(irq);
+  // TODO not used yet
+}
 
-#if CFG_TUD_ENABLED
-  tud_int_handler(0);
 #endif
-}
 
 //--------------------------------------------------------------------+
 // stdlib
diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake
index f93880dff..11bc7c668 100644
--- a/hw/bsp/ra/family.cmake
+++ b/hw/bsp/ra/family.cmake
@@ -13,7 +13,7 @@ include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake)
 
 set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake)
 
-set(FAMILY_MCUS RA CACHE INTERNAL "")
+set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "")
 
 #------------------------------------
 # BOARD_TARGET
@@ -37,14 +37,10 @@ function(add_board_target BOARD_TARGET)
       ${FSP_RA}/src/bsp/mcu/all/bsp_security.c
       ${FSP_RA}/src/r_ioport/r_ioport.c
       )
-    target_compile_definitions(${BOARD_TARGET} PUBLIC
-      _RA_TZ_NONSECURE
-      )
 
     target_compile_options(${BOARD_TARGET} PUBLIC
       -ffreestanding
       )
-
     target_include_directories(${BOARD_TARGET} PUBLIC
       ${CMAKE_CURRENT_FUNCTION_LIST_DIR}
       ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}
@@ -120,6 +116,7 @@ function(family_configure_example TARGET RTOS)
   target_sources(${TARGET}-tinyusb PUBLIC
     ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c
     ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c
+    ${TOP}/src/portable/renesas/rusb2/rusb2_common.c
     )
   target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD})
 
@@ -128,4 +125,9 @@ function(family_configure_example TARGET RTOS)
 
   # Flashing
   family_flash_jlink(${TARGET})
+
+  if (DEFINED DFU_UTIL_VID_PID)
+    family_add_bin_hex(${TARGET})
+    family_flash_dfu_util(${TARGET} ${DFU_UTIL_VID_PID})
+  endif ()
 endfunction()
diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk
index 03125aac5..9afb38e06 100644
--- a/hw/bsp/ra/family.mk
+++ b/hw/bsp/ra/family.mk
@@ -3,8 +3,16 @@ DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5
 FSP_RA = hw/mcu/renesas/fsp/ra/fsp
 include $(TOP)/$(BOARD_PATH)/board.mk
 
+# Don't include options setting in .bin file since it create unnecessary large file due to padding
+OBJCOPY_BIN_OPTION = --only-section .text --only-section .data --only-section .rodata --only-section .bss
+
+# Default to port 0 fullspeed, board with port 1 highspeed should override this in board.mk
+PORT ?= 0
+
 CFLAGS += \
+  -flto \
   -DCFG_TUSB_MCU=OPT_MCU_RAXXX \
+  -DBOARD_TUD_RHPORT=$(PORT) \
 	-Wno-error=undef \
 	-Wno-error=strict-prototypes \
 	-Wno-error=cast-align \
@@ -15,9 +23,18 @@ CFLAGS += \
 	-nostartfiles \
 	-ffreestanding
 
+ifeq ($(PORT), 1)
+  CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
+  $(info "Using PORT 1 HighSpeed")
+else
+  CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
+  $(info "Using PORT 0 FullSpeed")
+endif
+
 SRC_C += \
 	src/portable/renesas/rusb2/dcd_rusb2.c \
 	src/portable/renesas/rusb2/hcd_rusb2.c \
+	src/portable/renesas/rusb2/rusb2_common.c \
 	$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \
 	$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \
 	$(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \
@@ -42,13 +59,15 @@ INC += \
 	$(TOP)/$(FSP_RA)/inc \
 	$(TOP)/$(FSP_RA)/inc/api \
 	$(TOP)/$(FSP_RA)/inc/instances \
+  $(TOP)/$(FSP_RA)/src/bsp/mcu/all \
 	$(TOP)/$(FSP_RA)/src/bsp/mcu/$(MCU_VARIANT) \
 
 ifndef LD_FILE
 LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld
-LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc
 endif
 
+LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc
+
 # For freeRTOS port source
 # hack to use the port provided by renesas
 FREERTOS_PORTABLE_SRC = $(FSP_RA)/src/rm_freertos_port
diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h
index 400743d17..ca667faa3 100644
--- a/hw/bsp/ra/vector_data.h
+++ b/hw/bsp/ra/vector_data.h
@@ -6,22 +6,29 @@
 extern "C" {
 #endif
 
-#ifndef VECTOR_DATA_IRQ_COUNT
-  #define VECTOR_DATA_IRQ_COUNT 4
-#endif
-
 /* ISR prototypes */
 void usbfs_interrupt_handler(void);
 void usbfs_resume_handler(void);
 void usbfs_d0fifo_handler(void);
 void usbfs_d1fifo_handler(void);
 
+#ifdef BOARD_HAS_USB_HIGHSPEED
+void usbhs_interrupt_handler(void);
+void usbhs_d0fifo_handler(void);
+void usbhs_d1fifo_handler(void);
+#endif
+
 /* Vector table allocations */
-#define TU_IRQn 0
+#define USBFS_INT_IRQn    0
 #define USBFS_RESUME_IRQn 1
 #define USBFS_FIFO_0_IRQn 2
 #define USBFS_FIFO_1_IRQn 3
 
+#define USBHS_USB_INT_RESUME_IRQn  4 /* USBHS USB INT RESUME (USBHS interrupt) */
+#define USBHS_FIFO_0_IRQn          5 /* USBHS FIFO 0 (DMA transfer request 0) */
+#define USBHS_FIFO_1_IRQn          6 /* USBHS FIFO 1 (DMA transfer request 1) */
+
+
 #ifdef __cplusplus
 }
 #endif