fix trailing space and new line

temporarily disable codespell

6 files changed, 41 insertions, 41 deletions

diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
index a7ae013dd..c8de8e0f3 100644
--- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
+++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.c
@@ -62,7 +62,7 @@ Additional information:
           WrOff == (RdOff - 1): Buffer is full
           WrOff >  RdOff:       Free space includes wrap-around
           WrOff <  RdOff:       Used space includes wrap-around
-          (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0):  
+          (WrOff == (SizeOfBuffer - 1)) && (RdOff == 0):
                                 Buffer full and wrap-around after next byte
 
 
@@ -504,7 +504,7 @@ static unsigned _GetAvailWriteSpace(SEGGER_RTT_BUFFER_UP* pRing) {
 *    Reads characters from SEGGER real-time-terminal control block
 *    which have been previously stored by the application.
 *    Do not lock against interrupts and multiple access.
-*    Used to do the same operation that J-Link does, to transfer 
+*    Used to do the same operation that J-Link does, to transfer
 *    RTT data via other channels, such as TCP/IP or UART.
 *
 *  Parameters
@@ -693,7 +693,7 @@ unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned Buffe
 *  Function description
 *    Reads characters from SEGGER real-time-terminal control block
 *    which have been previously stored by the application.
-*    Used to do the same operation that J-Link does, to transfer 
+*    Used to do the same operation that J-Link does, to transfer
 *    RTT data via other channels, such as TCP/IP or UART.
 *
 *  Parameters
@@ -708,7 +708,7 @@ unsigned SEGGER_RTT_ReadNoLock(unsigned BufferIndex, void* pData, unsigned Buffe
 *    This function must not be called when J-Link might also do RTT.
 *    This function locks against all other RTT operations. I.e. during
 *    the read operation, writing is also locked.
-*    If only one consumer reads from the up buffer, 
+*    If only one consumer reads from the up buffer,
 *    call sEGGER_RTT_ReadUpBufferNoLock() instead.
 */
 unsigned SEGGER_RTT_ReadUpBuffer(unsigned BufferIndex, void* pBuffer, unsigned BufferSize) {
@@ -766,7 +766,7 @@ unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSiz
 *  Function description
 *    Stores a specified number of characters in SEGGER RTT
 *    control block.
-*    SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application 
+*    SEGGER_RTT_WriteWithOverwriteNoLock does not lock the application
 *    and overwrites data if the data does not fit into the buffer.
 *
 *  Parameters
@@ -779,7 +779,7 @@ unsigned SEGGER_RTT_Read(unsigned BufferIndex, void* pBuffer, unsigned BufferSiz
 *    (2) For performance reasons this function does not call Init()
 *        and may only be called after RTT has been initialized.
 *        Either by calling SEGGER_RTT_Init() or calling another RTT API function first.
-*    (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link 
+*    (3) Do not use SEGGER_RTT_WriteWithOverwriteNoLock if a J-Link
 *        connection reads RTT data.
 */
 void SEGGER_RTT_WriteWithOverwriteNoLock(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) {
@@ -946,7 +946,7 @@ CopyStraight:
 *    Stores a specified number of characters in SEGGER RTT
 *    control block inside a <Down> buffer.
 *    SEGGER_RTT_WriteDownBufferNoLock does not lock the application.
-*    Used to do the same operation that J-Link does, to transfer 
+*    Used to do the same operation that J-Link does, to transfer
 *    RTT data from other channels, such as TCP/IP or UART.
 *
 *  Parameters
@@ -1116,7 +1116,7 @@ unsigned SEGGER_RTT_WriteNoLock(unsigned BufferIndex, const void* pBuffer, unsig
 *    This function must not be called when J-Link might also do RTT.
 *    This function locks against all other RTT operations. I.e. during
 *    the write operation, writing from the application is also locked.
-*    If only one consumer writes to the down buffer, 
+*    If only one consumer writes to the down buffer,
 *    call SEGGER_RTT_WriteDownBufferNoLock() instead.
 */
 unsigned SEGGER_RTT_WriteDownBuffer(unsigned BufferIndex, const void* pBuffer, unsigned NumBytes) {
diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h
index 3c04df55f..07eb4f39e 100644
--- a/lib/SEGGER_RTT/RTT/SEGGER_RTT.h
+++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT.h
@@ -44,7 +44,7 @@
 ---------------------------END-OF-HEADER------------------------------
 File    : SEGGER_RTT.h
 Purpose : Implementation of SEGGER real-time transfer which allows
-          real-time communication on targets which support debugger 
+          real-time communication on targets which support debugger
           memory accesses while the CPU is running.
 Revision: $Rev: 17697 $
 ----------------------------------------------------------------------
diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S b/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S
index 78cde4d75..aec372eec 100644
--- a/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S
+++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT_ASM_ARMv7M.S
@@ -36,9 +36,9 @@ Additional information:
   #define _THUMB_CODE          .code 16
   #define _WORD                .word
   #define _SECTION(Sect, Type, AlignExp) .section Sect ##, "ax"
-  #define _ALIGN(Exp)          .align Exp 
+  #define _ALIGN(Exp)          .align Exp
   #define _PLACE_LITS          .ltorg
-  #define _DATA_SECT_START 
+  #define _DATA_SECT_START
   #define _C_STARTUP           _start
   #define _STACK_END           __stack_end__
   #define _RAMFUNC
@@ -58,7 +58,7 @@ Additional information:
   #define _THUMB_CODE          THUMB
   #define _WORD                DCD
   #define _SECTION(Sect, Type, AlignExp) SECTION Sect ## : ## Type ## :REORDER:NOROOT ## (AlignExp)
-  #define _ALIGN(Exp)          alignrom Exp 
+  #define _ALIGN(Exp)          alignrom Exp
   #define _PLACE_LITS
   #define _DATA_SECT_START     DATA
   #define _C_STARTUP           __iar_program_start
diff --git a/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h b/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h
index 5e79d7e67..fda5a5f51 100644
--- a/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h
+++ b/lib/SEGGER_RTT/RTT/SEGGER_RTT_Conf.h
@@ -91,12 +91,12 @@ Revision: $Rev: 18601 $
 *
 *       RTT memcpy configuration
 *
-*       memcpy() is good for large amounts of data, 
+*       memcpy() is good for large amounts of data,
 *       but the overhead is big for small amounts, which are usually stored via RTT.
 *       With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead.
 *
 *       SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions.
-*       This is may be required with memory access restrictions, 
+*       This is may be required with memory access restrictions,
 *       such as on Cortex-A devices with MMU.
 */
 #ifndef   SEGGER_RTT_MEMCPY_USE_BYTELOOP
@@ -105,7 +105,7 @@ Revision: $Rev: 18601 $
 //
 // Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets
 //
-//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__))  
+//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__))
 //  #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes)      SEGGER_memcpy((pDest), (pSrc), (NumBytes))
 //#endif
 
@@ -204,7 +204,7 @@ Revision: $Rev: 18601 $
                                                  :                             \
                                                  :                             \
                                                 );
-                               
+
   #define SEGGER_RTT_UNLOCK()    __asm volatile ("csrr  a1, mstatus  \n\t"     \
                                                  "or    %0, %0, a1   \n\t"     \
                                                  "csrs  mstatus, %0  \n\t"     \
@@ -345,8 +345,8 @@ Revision: $Rev: 18601 $
   #define SEGGER_RTT_LOCK()   {                                                                     \
                                 unsigned long LockState;                                            \
                                 LockState = get_psw() & 0x010000;                                   \
-                                clrpsw_i();                           
-                                    
+                                clrpsw_i();
+
   #define SEGGER_RTT_UNLOCK()   set_psw(get_psw() | LockState);                                     \
                               }
 #endif
diff --git a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c
index da4a4b5f5..6bf670a02 100644
--- a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c
+++ b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_GCC.c
@@ -44,7 +44,7 @@
 ---------------------------END-OF-HEADER------------------------------
 File    : SEGGER_RTT_Syscalls_GCC.c
 Purpose : Low-level functions for using printf() via RTT in GCC.
-          To use RTT for printf output, include this file in your 
+          To use RTT for printf output, include this file in your
           application.
 Revision: $Rev: 17697 $
 ----------------------------------------------------------------------
@@ -62,7 +62,7 @@ Revision: $Rev: 17697 $
 **********************************************************************
 */
 //
-// If necessary define the _reent struct 
+// If necessary define the _reent struct
 // to match the one passed by the used standard library.
 //
 struct _reent;
diff --git a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c
index f7f5aed48..ba9772d3e 100644
--- a/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c
+++ b/lib/SEGGER_RTT/Syscalls/SEGGER_RTT_Syscalls_KEIL.c
@@ -110,7 +110,7 @@ const char __stderr_name[] = "STDERR";
 *
 *  Parameters:
 *    c    - character to output
-*  
+*
 */
 void _ttywrch(int c) {
   fputc(c, stdout); // stdout
@@ -127,9 +127,9 @@ void _ttywrch(int c) {
 *  Parameters:
 *    sName        - sName of the device/file to open
 *    OpenMode    - This parameter is currently ignored
-*  
+*
 *  Return value:
-*    != 0     - Handle to the object to open, otherwise 
+*    != 0     - Handle to the object to open, otherwise
 *    == 0     -"device" is not handled by this module
 *
 */
@@ -153,7 +153,7 @@ FILEHANDLE _sys_open(const char * sName, int OpenMode) {
 *
 *  Parameters:
 *    hFile    - Handle to a file opened via _sys_open
-*  
+*
 *  Return value:
 *    0     - device/file closed
 *
@@ -176,7 +176,7 @@ int _sys_close(FILEHANDLE hFile) {
 *    pBuffer  - Pointer to the data that shall be written
 *    NumBytes      - Number of bytes to write
 *    Mode     - The Mode that shall be used
-*  
+*
 *  Return value:
 *    Number of bytes *not* written to the file/device
 *
@@ -205,7 +205,7 @@ int _sys_write(FILEHANDLE hFile, const unsigned char * pBuffer, unsigned NumByte
 *    pBuffer  - Pointer to buffer to store the read data
 *    NumBytes      - Number of bytes to read
 *    Mode     - The Mode that shall be used
-*  
+*
 *  Return value:
 *    Number of bytes read from the file/device
 *
@@ -223,12 +223,12 @@ int _sys_read(FILEHANDLE hFile, unsigned char * pBuffer, unsigned NumBytes, int
 *       _sys_istty
 *
 *  Function description:
-*    This function shall return whether the opened file 
+*    This function shall return whether the opened file
 *    is a console device or not.
 *
 *  Parameters:
 *    hFile    - Handle to a file opened via _sys_open
-*  
+*
 *  Return value:
 *    1       - Device is     a console
 *    0       - Device is not a console
@@ -250,10 +250,10 @@ int _sys_istty(FILEHANDLE hFile) {
 *
 *  Parameters:
 *    hFile  - Handle to a file opened via _sys_open
-*    Pos    - 
-*  
+*    Pos    -
+*
 *  Return value:
-*    int       - 
+*    int       -
 *
 */
 int _sys_seek(FILEHANDLE hFile, long Pos) {
@@ -267,13 +267,13 @@ int _sys_seek(FILEHANDLE hFile, long Pos) {
 *       _sys_ensure
 *
 *  Function description:
-*    
+*
 *
 *  Parameters:
 *    hFile    - Handle to a file opened via _sys_open
-*  
+*
 *  Return value:
-*    int       - 
+*    int       -
 *
 */
 int _sys_ensure(FILEHANDLE hFile) {
@@ -290,7 +290,7 @@ int _sys_ensure(FILEHANDLE hFile) {
 *
 *  Parameters:
 *    hFile    - Handle to a file opened via _sys_open
-*  
+*
 *  Return value:
 *    Length of the file
 *
@@ -305,17 +305,17 @@ long _sys_flen(FILEHANDLE hFile) {
 *       _sys_tmpnam
 *
 *  Function description:
-*    This function converts the file number fileno for a temporary 
+*    This function converts the file number fileno for a temporary
 *    file to a unique filename, for example, tmp0001.
 *
 *  Parameters:
 *    pBuffer    - Pointer to a buffer to store the name
 *    FileNum    - file number to convert
 *    MaxLen     - Size of the buffer
-*  
+*
 *  Return value:
 *     1 - Error
-*     0 - Success  
+*     0 - Success
 *
 */
 int _sys_tmpnam(char * pBuffer, int FileNum, unsigned MaxLen) {
@@ -335,7 +335,7 @@ int _sys_tmpnam(char * pBuffer, int FileNum, unsigned MaxLen) {
 *  Parameters:
 *    cmd    - Pointer to the command string
 *    len    - Length of the string
-*  
+*
 *  Return value:
 *    == NULL - Command was not successfully executed
 *    == sCmd - Command was passed successfully
@@ -355,7 +355,7 @@ char * _sys_command_string(char * cmd, int len) {
 *
 *  Parameters:
 *    ReturnCode    - Return code from the main function
-*  
+*
 *
 */
 void _sys_exit(int ReturnCode) {
@@ -373,7 +373,7 @@ void _sys_exit(int ReturnCode) {
 *
 *  Parameters:
 *    ch    - Character to output
-*  
+*
 *
 */
 int stdout_putchar(int ch) {