clean up device msc API

1 files changed, 6 insertions, 9 deletions

diff --git a/src/class/msc/msc_device.h b/src/class/msc/msc_device.h
index fbfe7ef14..60144cc55 100644
--- a/src/class/msc/msc_device.h
+++ b/src/class/msc/msc_device.h
@@ -102,7 +102,6 @@ bool tud_msc_ready(void);
 // APPLICATION CALLBACK API (WEAK is optional)

 //--------------------------------------------------------------------+

 /** \brief Callback invoked when received \ref SCSI_CMD_READ_10 command

- * \param[in]		\rhport     Root hub port

  * \param[in]		lun         Targeted Logical Unit

  *                          Must be accessible by USB controller (see \ref CFG_TUSB_ATTR_USBRAM)

  * \param[in]		lba         Starting Logical Block Address to be read

@@ -126,10 +125,9 @@ bool tud_msc_ready(void);
  *              \n\n Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

  *              the same task (to save resource), any delay in this callback will cause delay in response on other classes.

  */

-int32_t tud_msc_read10_cb (uint8_t rhport, uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize);

+int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize);

 

 /** \brief 			Callback invoked when received \ref SCSI_CMD_WRITE_10 command

- * \param[in]		rhport	    Root hub port

  * \param[in]		lun         Targeted Logical Unit

  *                          Must be accessible by USB controller (see \ref CFG_TUSB_ATTR_USBRAM)

  * \param[in]		lba         Starting Logical Block Address to be write

@@ -152,11 +150,10 @@ int32_t tud_msc_read10_cb (uint8_t rhport, uint8_t lun, uint32_t lba, uint32_t o
  *              \n\n Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

  *              the same task (to save resource), any delay in this callback will cause delay in response on other classes.

  */

-int32_t tud_msc_write10_cb (uint8_t rhport, uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize);

+int32_t tud_msc_write10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize);

 

 

 /** \brief 			Callback invoked when received an SCSI command other than \ref SCSI_CMD_WRITE_10 and \ref SCSI_CMD_READ_10

- * \param[in]		rhport	    Root hub port

  * \param[in]		lun         Targeted Logical Unit

  * \param[in]		scsi_cmd    SCSI command contents, application should examine this command block to know which command host requested

  * \param[out]  buffer      Buffer for SCSI Data Stage.

@@ -168,12 +165,12 @@ int32_t tud_msc_write10_cb (uint8_t rhport, uint8_t lun, uint32_t lba, uint32_t
  *                          endpoint and return failed status in command status wrapper phase.

  * \retval      otherwise   Actual bytes processed, must not be more than \a \b bufsize. Can be zero for no-data command.

  */

-int32_t tud_msc_scsi_cb (uint8_t rhport, uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize);

+int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize);

 

 /*------------- Optional callbacks : Could be used by application to free up resources -------------*/

-ATTR_WEAK void tud_msc_read10_complete_cb(uint8_t rhport, uint8_t lun);

-ATTR_WEAK void tud_msc_write10_complete_cb(uint8_t rhport, uint8_t lun);

-ATTR_WEAK void tud_msc_scsi_complete_cb(uint8_t rhport, uint8_t lun, uint8_t const scsi_cmd[16]);

+ATTR_WEAK void tud_msc_read10_complete_cb(uint8_t lun);

+ATTR_WEAK void tud_msc_write10_complete_cb(uint8_t lun);

+ATTR_WEAK void tud_msc_scsi_complete_cb(uint8_t lun, uint8_t const scsi_cmd[16]);

 

 /** @} */

 /** @} */