Merge pull request #2708 from BrentK-ADI/max32_port

Add port for Analog Devices MAX32 MCUs

1 files changed, 15 insertions, 4 deletions

diff --git a/src/device/usbd.c b/src/device/usbd.c
index 7089e9cf1..67faf0da7 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -1418,9 +1418,12 @@ bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr) {
  * In progress transfers on this EP may be delivered after this call.
  */
 void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) {
+#ifdef TUP_DCD_EDPT_ISO_ALLOC
+  (void) rhport; (void) ep_addr;
+  // ISO alloc/activate Should be used instead
+#else
   rhport = _usbd_rhport;
 
-  TU_ASSERT(dcd_edpt_close, /**/);
   TU_LOG_USBD("  CLOSING Endpoint: 0x%02X\r\n", ep_addr);
 
   uint8_t const epnum = tu_edpt_number(ep_addr);
@@ -1430,6 +1433,7 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr) {
   _usbd_dev.ep_status[epnum][dir].stalled = 0;
   _usbd_dev.ep_status[epnum][dir].busy = 0;
   _usbd_dev.ep_status[epnum][dir].claimed = 0;
+#endif
 
   return;
 }
@@ -1452,21 +1456,24 @@ void usbd_sof_enable(uint8_t rhport, sof_consumer_t consumer, bool en) {
 }
 
 bool usbd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size) {
+#ifdef TUP_DCD_EDPT_ISO_ALLOC
   rhport = _usbd_rhport;
 
-  TU_ASSERT(dcd_edpt_iso_alloc);
   TU_ASSERT(tu_edpt_number(ep_addr) < CFG_TUD_ENDPPOINT_MAX);
-
   return dcd_edpt_iso_alloc(rhport, ep_addr, largest_packet_size);
+#else
+  (void) rhport; (void) ep_addr; (void) largest_packet_size;
+  return false;
+#endif
 }
 
 bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const* desc_ep) {
+#ifdef TUP_DCD_EDPT_ISO_ALLOC
   rhport = _usbd_rhport;
 
   uint8_t const epnum = tu_edpt_number(desc_ep->bEndpointAddress);
   uint8_t const dir = tu_edpt_dir(desc_ep->bEndpointAddress);
 
-  TU_ASSERT(dcd_edpt_iso_activate);
   TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX);
   TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed));
 
@@ -1474,6 +1481,10 @@ bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const* desc_ep)
   _usbd_dev.ep_status[epnum][dir].busy = 0;
   _usbd_dev.ep_status[epnum][dir].claimed = 0;
   return dcd_edpt_iso_activate(rhport, desc_ep);
+#else
+  (void) rhport; (void) desc_ep;
+  return false;
+#endif
 }
 
 #endif