Merge branch 'hathach:master' into master

5 files changed, 222 insertions, 147 deletions

diff --git a/src/device/dcd.h b/src/device/dcd.h
index 8efbc90ef..00419ff05 100644
--- a/src/device/dcd.h
+++ b/src/device/dcd.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -77,6 +77,11 @@ typedef struct TU_ATTR_ALIGNED(4)
       tusb_speed_t speed;
     } bus_reset;
 
+    // SOF
+    struct {
+      uint32_t frame_count;
+    }sof;
+
     // SETUP_RECEIVED
     tusb_control_request_t setup_received;
 
@@ -105,14 +110,7 @@ typedef struct TU_ATTR_ALIGNED(4)
 void dcd_init       (uint8_t rhport);
 
 // Interrupt Handler
-#if __GNUC__ && !defined(__ARMCC_VERSION)
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wredundant-decls"
-#endif
 void dcd_int_handler(uint8_t rhport);
-#if __GNUC__ && !defined(__ARMCC_VERSION)
-#pragma GCC diagnostic pop
-#endif
 
 // Enable device interrupt
 void dcd_int_enable (uint8_t rhport);
@@ -132,6 +130,9 @@ void dcd_connect(uint8_t rhport) TU_ATTR_WEAK;
 // Disconnect by disabling internal pull-up resistor on D+/D-
 void dcd_disconnect(uint8_t rhport) TU_ATTR_WEAK;
 
+// Enable/Disable Start-of-frame interrupt. Default is disabled
+void dcd_sof_enable(uint8_t rhport, bool en);
+
 //--------------------------------------------------------------------+
 // Endpoint API
 //--------------------------------------------------------------------+
@@ -166,6 +167,12 @@ void dcd_edpt_stall           (uint8_t rhport, uint8_t ep_addr);
 // This API never calls with control endpoints, since it is auto cleared when receiving setup packet
 void dcd_edpt_clear_stall     (uint8_t rhport, uint8_t ep_addr);
 
+// Allocate packet buffer used by ISO endpoints
+// Some MCU need manual packet buffer allocation, we allocation largest size to avoid clustering
+TU_ATTR_WEAK bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size);
+
+// Configure and enable an ISO endpoint according to descriptor
+TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport,  tusb_desc_endpoint_t const * p_endpoint_desc);
 //--------------------------------------------------------------------+
 // Event API (implemented by stack)
 //--------------------------------------------------------------------+
@@ -174,16 +181,47 @@ void dcd_edpt_clear_stall     (uint8_t rhport, uint8_t ep_addr);
 extern void dcd_event_handler(dcd_event_t const * event, bool in_isr);
 
 // helper to send bus signal event
-extern void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr);
+TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr)
+{
+  dcd_event_t event = { .rhport = rhport, .event_id = eid };
+  dcd_event_handler(&event, in_isr);
+}
 
 // helper to send bus reset event
-extern void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr);
+TU_ATTR_ALWAYS_INLINE static inline  void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr)
+{
+  dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_BUS_RESET };
+  event.bus_reset.speed = speed;
+  dcd_event_handler(&event, in_isr);
+}
 
 // helper to send setup received
-extern void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr);
+TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr)
+{
+  dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SETUP_RECEIVED };
+  memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t));
+
+  dcd_event_handler(&event, in_isr);
+}
 
 // helper to send transfer complete event
-extern void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr);
+TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr)
+{
+  dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_XFER_COMPLETE };
+
+  event.xfer_complete.ep_addr = ep_addr;
+  event.xfer_complete.len     = xferred_bytes;
+  event.xfer_complete.result  = result;
+
+  dcd_event_handler(&event, in_isr);
+}
+
+static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr)
+{
+  dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SOF };
+  event.sof.frame_count = frame_count;
+  dcd_event_handler(&event, in_isr);
+}
 
 #ifdef __cplusplus
  }
diff --git a/src/device/usbd.c b/src/device/usbd.c
index 167a053e2..cee56af60 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -28,24 +28,24 @@
 
 #if CFG_TUD_ENABLED
 
+#include "device/dcd.h"
 #include "tusb.h"
 #include "common/tusb_private.h"
 
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"
-#include "device/dcd.h"
 
 //--------------------------------------------------------------------+
 // USBD Configuration
 //--------------------------------------------------------------------+
 
-// Debug level of USBD
-#define USBD_DBG   2
-
 #ifndef CFG_TUD_TASK_QUEUE_SZ
   #define CFG_TUD_TASK_QUEUE_SZ   16
 #endif
 
+// Debug level of USBD
+#define USBD_DBG   2
+
 //--------------------------------------------------------------------+
 // Device Data
 //--------------------------------------------------------------------+
@@ -69,14 +69,14 @@ typedef struct
   volatile uint8_t cfg_num; // current active configuration (0x00 is not configured)
   uint8_t speed;
 
-  uint8_t itf2drv[16];                      // map interface number to driver (0xff is invalid)
+  uint8_t itf2drv[CFG_TUD_INTERFACE_MAX];   // map interface number to driver (0xff is invalid)
   uint8_t ep2drv[CFG_TUD_ENDPPOINT_MAX][2]; // map endpoint to driver ( 0xff is invalid ), can use only 4-bit each
 
   tu_edpt_state_t ep_status[CFG_TUD_ENDPPOINT_MAX][2];
 
 }usbd_device_t;
 
-static usbd_device_t _usbd_dev;
+tu_static usbd_device_t _usbd_dev;
 
 //--------------------------------------------------------------------+
 // Class Driver
@@ -88,7 +88,7 @@ static usbd_device_t _usbd_dev;
 #endif
 
 // Built-in class drivers
-static usbd_class_driver_t const _usbd_driver[] =
+tu_static usbd_class_driver_t const _usbd_driver[] =
 {
   #if CFG_TUD_CDC
   {
@@ -134,7 +134,7 @@ static usbd_class_driver_t const _usbd_driver[] =
     .open             = audiod_open,
     .control_xfer_cb  = audiod_control_xfer_cb,
     .xfer_cb          = audiod_xfer_cb,
-    .sof              = NULL
+    .sof              = audiod_sof_isr
   },
   #endif
 
@@ -218,7 +218,7 @@ static usbd_class_driver_t const _usbd_driver[] =
     .open             = netd_open,
     .control_xfer_cb  = netd_control_xfer_cb,
     .xfer_cb          = netd_xfer_cb,
-    .sof              = NULL,
+    .sof                  = NULL,
   },
   #endif
 
@@ -238,8 +238,8 @@ static usbd_class_driver_t const _usbd_driver[] =
 enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(_usbd_driver) };
 
 // Additional class drivers implemented by application
-static usbd_class_driver_t const * _app_driver = NULL;
-static uint8_t _app_driver_count = 0;
+tu_static usbd_class_driver_t const * _app_driver = NULL;
+tu_static uint8_t _app_driver_count = 0;
 
 // virtually joins built-in and application drivers together.
 // Application is positioned first to allow overwriting built-in ones.
@@ -265,17 +265,19 @@ static inline usbd_class_driver_t const * get_driver(uint8_t drvid)
 //--------------------------------------------------------------------+
 
 enum { RHPORT_INVALID = 0xFFu };
-static uint8_t _usbd_rhport = RHPORT_INVALID;
+tu_static uint8_t _usbd_rhport = RHPORT_INVALID;
 
 // Event queue
 // usbd_int_set() is used as mutex in OS NONE config
 OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t);
-static osal_queue_t _usbd_q;
+tu_static osal_queue_t _usbd_q;
 
-// Mutex for claiming endpoint, only needed when using with preempted RTOS
-#if CFG_TUSB_OS != OPT_OS_NONE
-static osal_mutex_def_t _ubsd_mutexdef;
-static osal_mutex_t _usbd_mutex;
+// Mutex for claiming endpoint
+#if OSAL_MUTEX_REQUIRED
+  tu_static osal_mutex_def_t _ubsd_mutexdef;
+  tu_static osal_mutex_t _usbd_mutex;
+#else
+  #define _usbd_mutex   NULL
 #endif
 
 
@@ -297,7 +299,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t event,
 // Debug
 //--------------------------------------------------------------------+
 #if CFG_TUSB_DEBUG >= 2
-static char const* const _usbd_event_str[DCD_EVENT_COUNT] =
+tu_static char const* const _usbd_event_str[DCD_EVENT_COUNT] =
 {
   "Invalid"        ,
   "Bus Reset"      ,
@@ -316,9 +318,9 @@ void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback)
   for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++)
   {
     usbd_class_driver_t const * driver = get_driver(i);
-    if ( driver->control_xfer_cb == callback )
+    if ( driver && driver->control_xfer_cb == callback )
     {
-      TU_LOG2("  %s control complete\r\n", driver->name);
+      TU_LOG(USBD_DBG, "  %s control complete\r\n", driver->name);
       return;
     }
   }
@@ -384,12 +386,14 @@ bool tud_init (uint8_t rhport)
   // skip if already initialized
   if ( tud_inited() ) return true;
 
-  TU_LOG2("USBD init\r\n");
-  TU_LOG2_INT(sizeof(usbd_device_t));
+  TU_LOG(USBD_DBG, "USBD init on controller %u\r\n", rhport);
+  TU_LOG_INT(USBD_DBG, sizeof(usbd_device_t));
+  TU_LOG_INT(USBD_DBG, sizeof(tu_fifo_t));
+  TU_LOG_INT(USBD_DBG, sizeof(tu_edpt_stream_t));
 
   tu_varclr(&_usbd_dev);
 
-#if CFG_TUSB_OS != OPT_OS_NONE
+#if OSAL_MUTEX_REQUIRED
   // Init device mutex
   _usbd_mutex = osal_mutex_create(&_ubsd_mutexdef);
   TU_ASSERT(_usbd_mutex);
@@ -409,16 +413,17 @@ bool tud_init (uint8_t rhport)
   for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++)
   {
     usbd_class_driver_t const * driver = get_driver(i);
-    TU_LOG2("%s init\r\n", driver->name);
+    TU_ASSERT(driver);
+    TU_LOG(USBD_DBG, "%s init\r\n", driver->name);
     driver->init();
   }
 
+  _usbd_rhport = rhport;
+
   // Init device controller driver
   dcd_init(rhport);
   dcd_int_enable(rhport);
 
-  _usbd_rhport = rhport;
-
   return true;
 }
 
@@ -426,7 +431,9 @@ static void configuration_reset(uint8_t rhport)
 {
   for ( uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++ )
   {
-    get_driver(i)->reset(rhport);
+    usbd_class_driver_t const * driver = get_driver(i);
+    TU_ASSERT(driver, );
+    driver->reset(rhport);
   }
 
   tu_varclr(&_usbd_dev);
@@ -443,7 +450,7 @@ static void usbd_reset(uint8_t rhport)
 bool tud_task_event_ready(void)
 {
   // Skip if stack is not initialized
-  if ( !tusb_inited() ) return false;
+  if ( !tud_inited() ) return false;
 
   return !osal_queue_empty(_usbd_q);
 }
@@ -471,7 +478,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
   (void) in_isr; // not implemented yet
 
   // Skip if stack is not initialized
-  if ( !tusb_inited() ) return;
+  if ( !tud_inited() ) return;
 
   // Loop until there is no more events in the queue
   while (1)
@@ -480,20 +487,20 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
     if ( !osal_queue_receive(_usbd_q, &event, timeout_ms) ) return;
 
 #if CFG_TUSB_DEBUG >= 2
-    if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG2("\r\n"); // extra line for setup
-    TU_LOG2("USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED");
+    if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG(USBD_DBG, "\r\n"); // extra line for setup
+    TU_LOG(USBD_DBG, "USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED");
 #endif
 
     switch ( event.event_id )
     {
       case DCD_EVENT_BUS_RESET:
-        TU_LOG2(": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]);
+        TU_LOG(USBD_DBG, ": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]);
         usbd_reset(event.rhport);
         _usbd_dev.speed = event.bus_reset.speed;
       break;
 
       case DCD_EVENT_UNPLUGGED:
-        TU_LOG2("\r\n");
+        TU_LOG(USBD_DBG, "\r\n");
         usbd_reset(event.rhport);
 
         // invoke callback
@@ -501,8 +508,8 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
       break;
 
       case DCD_EVENT_SETUP_RECEIVED:
-        TU_LOG2_VAR(&event.setup_received);
-        TU_LOG2("\r\n");
+        TU_LOG_PTR(USBD_DBG, &event.setup_received);
+        TU_LOG(USBD_DBG, "\r\n");
 
         // Mark as connected after receiving 1st setup packet.
         // But it is easier to set it every time instead of wasting time to check then set
@@ -517,7 +524,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
         // Process control request
         if ( !process_control_request(event.rhport, &event.setup_received) )
         {
-          TU_LOG2("  Stall EP0\r\n");
+          TU_LOG(USBD_DBG, "  Stall EP0\r\n");
           // Failed -> stall both control endpoint IN and OUT
           dcd_edpt_stall(event.rhport, 0);
           dcd_edpt_stall(event.rhport, 0 | TUSB_DIR_IN_MASK);
@@ -531,7 +538,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
         uint8_t const epnum   = tu_edpt_number(ep_addr);
         uint8_t const ep_dir  = tu_edpt_dir(ep_addr);
 
-        TU_LOG2("on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len);
+        TU_LOG(USBD_DBG, "on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len);
 
         _usbd_dev.ep_status[epnum][ep_dir].busy = false;
         _usbd_dev.ep_status[epnum][ep_dir].claimed = 0;
@@ -545,7 +552,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
           usbd_class_driver_t const * driver = get_driver( _usbd_dev.ep2drv[epnum][ep_dir] );
           TU_ASSERT(driver, );
 
-          TU_LOG2("  %s xfer callback\r\n", driver->name);
+          TU_LOG(USBD_DBG, "  %s xfer callback\r\n", driver->name);
           driver->xfer_cb(event.rhport, ep_addr, (xfer_result_t)event.xfer_complete.result, event.xfer_complete.len);
         }
       }
@@ -557,39 +564,31 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
         // e.g suspend -> resume -> unplug/plug. Skip suspend/resume if not connected
         if ( _usbd_dev.connected )
         {
-          TU_LOG2(": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en);
+          TU_LOG(USBD_DBG, ": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en);
           if (tud_suspend_cb) tud_suspend_cb(_usbd_dev.remote_wakeup_en);
         }else
         {
-          TU_LOG2(" Skipped\r\n");
+          TU_LOG(USBD_DBG, " Skipped\r\n");
         }
       break;
 
       case DCD_EVENT_RESUME:
         if ( _usbd_dev.connected )
         {
-          TU_LOG2("\r\n");
+          TU_LOG(USBD_DBG, "\r\n");
           if (tud_resume_cb) tud_resume_cb();
         }else
         {
-          TU_LOG2(" Skipped\r\n");
-        }
-      break;
-
-      case DCD_EVENT_SOF:
-        TU_LOG2("\r\n");
-        for ( uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++ )
-        {
-          usbd_class_driver_t const * driver = get_driver(i);
-          if ( driver->sof ) driver->sof(event.rhport);
+          TU_LOG(USBD_DBG, " Skipped\r\n");
         }
       break;
 
       case USBD_EVENT_FUNC_CALL:
-        TU_LOG2("\r\n");
+        TU_LOG(USBD_DBG, "\r\n");
         if ( event.func_call.func ) event.func_call.func(event.func_call.param);
       break;
 
+      case DCD_EVENT_SOF:
       default:
         TU_BREAKPOINT();
       break;
@@ -610,7 +609,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
 static bool invoke_class_control(uint8_t rhport, usbd_class_driver_t const * driver, tusb_control_request_t const * request)
 {
   usbd_control_set_complete_callback(driver->control_xfer_cb);
-  TU_LOG2("  %s control request\r\n", driver->name);
+  TU_LOG(USBD_DBG, "  %s control request\r\n", driver->name);
   return driver->control_xfer_cb(rhport, CONTROL_STAGE_SETUP, request);
 }
 
@@ -634,8 +633,8 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
 #if CFG_TUSB_DEBUG >= 2
   if (TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && p_request->bRequest <= TUSB_REQ_SYNCH_FRAME)
   {
-    TU_LOG2("  %s", tu_str_std_request[p_request->bRequest]);
-    if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG2("\r\n");
+    TU_LOG(USBD_DBG, "  %s", tu_str_std_request[p_request->bRequest]);
+    if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG(USBD_DBG, "\r\n");
   }
 #endif
 
@@ -743,7 +742,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
           // Device status bit mask
           // - Bit 0: Self Powered
           // - Bit 1: Remote Wakeup enabled
-          uint16_t status = (_usbd_dev.self_powered ? 1 : 0) | (_usbd_dev.remote_wakeup_en ? 2 : 0);
+          uint16_t status = (uint16_t) ((_usbd_dev.self_powered ? 1u : 0u) | (_usbd_dev.remote_wakeup_en ? 2u : 0u));
           tud_control_xfer(rhport, p_request, &status, 2);
         }
         break;
@@ -875,8 +874,8 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num)
   TU_ASSERT(desc_cfg != NULL && desc_cfg->bDescriptorType == TUSB_DESC_CONFIGURATION);
 
   // Parse configuration descriptor
-  _usbd_dev.remote_wakeup_support = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP) ? 1 : 0;
-  _usbd_dev.self_powered          = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_SELF_POWERED ) ? 1 : 0;
+  _usbd_dev.remote_wakeup_support = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP) ? 1u : 0u;
+  _usbd_dev.self_powered          = (desc_cfg->bmAttributes & TUSB_DESC_CONFIG_ATT_SELF_POWERED ) ? 1u : 0u;
 
   // Parse interface descriptor
   uint8_t const * p_desc   = ((uint8_t const*) desc_cfg) + sizeof(tusb_desc_configuration_t);
@@ -903,17 +902,18 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num)
     tusb_desc_interface_t const * desc_itf = (tusb_desc_interface_t const*) p_desc;
 
     // Find driver for this interface
-    uint16_t const remaining_len = desc_end-p_desc;
+    uint16_t const remaining_len = (uint16_t) (desc_end-p_desc);
     uint8_t drv_id;
     for (drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++)
     {
       usbd_class_driver_t const *driver = get_driver(drv_id);
+      TU_ASSERT(driver);
       uint16_t const drv_len = driver->open(rhport, desc_itf, remaining_len);
 
       if ( (sizeof(tusb_desc_interface_t) <= drv_len)  && (drv_len <= remaining_len) )
       {
         // Open successfully
-        TU_LOG2("  %s opened\r\n", driver->name);
+        TU_LOG(USBD_DBG, "  %s opened\r\n", driver->name);
 
         // Some drivers use 2 or more interfaces but may not have IAD e.g MIDI (always) or
         // BTH (even CDC) with class in device descriptor (single interface)
@@ -972,7 +972,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
   {
     case TUSB_DESC_DEVICE:
     {
-      TU_LOG2(" Device\r\n");
+      TU_LOG(USBD_DBG, " Device\r\n");
 
       void* desc_device = (void*) (uintptr_t) tud_descriptor_device_cb();
 
@@ -996,7 +996,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
     case TUSB_DESC_BOS:
     {
-      TU_LOG2(" BOS\r\n");
+      TU_LOG(USBD_DBG, " BOS\r\n");
 
       // requested by host if USB > 2.0 ( i.e 2.1 or 3.x )
       if (!tud_descriptor_bos_cb) return false;
@@ -1018,12 +1018,12 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
       if ( desc_type == TUSB_DESC_CONFIGURATION )
       {
-        TU_LOG2(" Configuration[%u]\r\n", desc_index);
+        TU_LOG(USBD_DBG, " Configuration[%u]\r\n", desc_index);
         desc_config = (uintptr_t) tud_descriptor_configuration_cb(desc_index);
       }else
       {
         // Host only request this after getting Device Qualifier descriptor
-        TU_LOG2(" Other Speed Configuration\r\n");
+        TU_LOG(USBD_DBG, " Other Speed Configuration\r\n");
         TU_VERIFY( tud_descriptor_other_speed_configuration_cb );
         desc_config = (uintptr_t) tud_descriptor_other_speed_configuration_cb(desc_index);
       }
@@ -1039,7 +1039,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
     case TUSB_DESC_STRING:
     {
-      TU_LOG2(" String[%u]\r\n", desc_index);
+      TU_LOG(USBD_DBG, " String[%u]\r\n", desc_index);
 
       // String Descriptor always uses the desc set from user
       uint8_t const* desc_str = (uint8_t const*) tud_descriptor_string_cb(desc_index, tu_le16toh(p_request->wIndex));
@@ -1052,7 +1052,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
     case TUSB_DESC_DEVICE_QUALIFIER:
     {
-      TU_LOG2(" Device Qualifier\r\n");
+      TU_LOG(USBD_DBG, " Device Qualifier\r\n");
 
       TU_VERIFY( tud_descriptor_device_qualifier_cb );
 
@@ -1071,7 +1071,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 //--------------------------------------------------------------------+
 // DCD Event Handler
 //--------------------------------------------------------------------+
-void dcd_event_handler(dcd_event_t const * event, bool in_isr)
+TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const * event, bool in_isr)
 {
   switch (event->event_id)
   {
@@ -1105,14 +1105,27 @@ void dcd_event_handler(dcd_event_t const * event, bool in_isr)
     break;
 
     case DCD_EVENT_SOF:
+      // SOF driver handler in ISR context
+      for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++)
+      {
+        usbd_class_driver_t const * driver = get_driver(i);
+        if (driver && driver->sof)
+        {
+          driver->sof(event->rhport, event->sof.frame_count);
+        }
+      }
+
       // Some MCUs after running dcd_remote_wakeup() does not have way to detect the end of remote wakeup
       // which last 1-15 ms. DCD can use SOF as a clear indicator that bus is back to operational
       if ( _usbd_dev.suspended )
       {
         _usbd_dev.suspended = 0;
+
         dcd_event_t const event_resume = { .rhport = event->rhport, .event_id = DCD_EVENT_RESUME };
         osal_queue_send(_usbd_q, &event_resume, in_isr);
       }
+
+      // skip osal queue for SOF in usbd task
     break;
 
     default:
@@ -1121,38 +1134,6 @@ void dcd_event_handler(dcd_event_t const * event, bool in_isr)
   }
 }
 
-void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr)
-{
-  dcd_event_t event = { .rhport = rhport, .event_id = eid };
-  dcd_event_handler(&event, in_isr);
-}
-
-void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr)
-{
-  dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_BUS_RESET };
-  event.bus_reset.speed = speed;
-  dcd_event_handler(&event, in_isr);
-}
-
-void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr)
-{
-  dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SETUP_RECEIVED };
-  memcpy(&event.setup_received, setup, 8);
-
-  dcd_event_handler(&event, in_isr);
-}
-
-void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr)
-{
-  dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_XFER_COMPLETE };
-
-  event.xfer_complete.ep_addr = ep_addr;
-  event.xfer_complete.len     = xferred_bytes;
-  event.xfer_complete.result  = result;
-
-  dcd_event_handler(&event, in_isr);
-}
-
 //--------------------------------------------------------------------+
 // USBD API For Class Driver
 //--------------------------------------------------------------------+
@@ -1213,6 +1194,8 @@ void usbd_defer_func(osal_task_func_t func, void* param, bool in_isr)
 
 bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep)
 {
+  rhport = _usbd_rhport;
+
   TU_ASSERT(tu_edpt_number(desc_ep->bEndpointAddress) < CFG_TUD_ENDPPOINT_MAX);
   TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed));
 
@@ -1230,11 +1213,7 @@ bool usbd_edpt_claim(uint8_t rhport, uint8_t ep_addr)
   uint8_t const dir         = tu_edpt_dir(ep_addr);
   tu_edpt_state_t* ep_state = &_usbd_dev.ep_status[epnum][dir];
 
-#if TUSB_OPT_MUTEX
   return tu_edpt_claim(ep_state, _usbd_mutex);
-#else
-  return tu_edpt_claim(ep_state, NULL);
-#endif
 }
 
 bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr)
@@ -1245,22 +1224,20 @@ bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr)
   uint8_t const dir         = tu_edpt_dir(ep_addr);
   tu_edpt_state_t* ep_state = &_usbd_dev.ep_status[epnum][dir];
 
-#if TUSB_OPT_MUTEX
   return tu_edpt_release(ep_state, _usbd_mutex);
-#else
-  return tu_edpt_release(ep_state, NULL);
-#endif
 }
 
 bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)
 {
+  rhport = _usbd_rhport;
+
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
   // TODO skip ready() check for now since enumeration also use this API
   // TU_VERIFY(tud_ready());
 
-  TU_LOG2("  Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes);
+  TU_LOG(USBD_DBG, "  Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes);
 
   // Attempt to transfer on a busy endpoint, sound like an race condition !
   TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0);
@@ -1277,7 +1254,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
     // DCD error, mark endpoint as ready to allow next transfer
     _usbd_dev.ep_status[epnum][dir].busy = false;
     _usbd_dev.ep_status[epnum][dir].claimed = 0;
-    TU_LOG2("FAILED\r\n");
+    TU_LOG(USBD_DBG, "FAILED\r\n");
     TU_BREAKPOINT();
     return false;
   }
@@ -1289,10 +1266,12 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
 // into the USB buffer!
 bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes)
 {
+  rhport = _usbd_rhport;
+
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
-  TU_LOG2("  Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes);
+  TU_LOG(USBD_DBG, "  Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes);
 
   // Attempt to transfer on a busy endpoint, sound like an race condition !
   TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0);
@@ -1303,14 +1282,14 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16
 
   if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes))
   {
-    TU_LOG2("OK\r\n");
+    TU_LOG(USBD_DBG, "OK\r\n");
     return true;
   }else
   {
     // DCD error, mark endpoint as ready to allow next transfer
     _usbd_dev.ep_status[epnum][dir].busy = false;
     _usbd_dev.ep_status[epnum][dir].claimed = 0;
-    TU_LOG2("failed\r\n");
+    TU_LOG(USBD_DBG, "failed\r\n");
     TU_BREAKPOINT();
     return false;
   }
@@ -1328,6 +1307,7 @@ bool usbd_edpt_busy(uint8_t rhport, uint8_t ep_addr)
 
 void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
 {
+  rhport = _usbd_rhport;
 
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
@@ -1344,6 +1324,8 @@ void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
 
 void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
 {
+  rhport = _usbd_rhport;
+
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
@@ -1375,8 +1357,10 @@ bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr)
  */
 void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr)
 {
+  rhport = _usbd_rhport;
+
   TU_ASSERT(dcd_edpt_close, /**/);
-  TU_LOG2("  CLOSING Endpoint: 0x%02X\r\n", ep_addr);
+  TU_LOG(USBD_DBG, "  CLOSING Endpoint: 0x%02X\r\n", ep_addr);
 
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
@@ -1389,4 +1373,40 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr)
   return;
 }
 
+void usbd_sof_enable(uint8_t rhport, bool en)
+{
+  rhport = _usbd_rhport;
+
+  // TODO: Check needed if all drivers including the user sof_cb does not need an active SOF ISR any more.
+  // Only if all drivers switched off SOF calls the SOF interrupt may be disabled
+  dcd_sof_enable(rhport, en);
+}
+
+bool usbd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size)
+{
+  rhport = _usbd_rhport;
+
+  TU_ASSERT(dcd_edpt_iso_alloc);
+  TU_ASSERT(tu_edpt_number(ep_addr) < CFG_TUD_ENDPPOINT_MAX);
+
+  return dcd_edpt_iso_alloc(rhport, ep_addr, largest_packet_size);
+}
+
+bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep)
+{
+  rhport = _usbd_rhport;
+
+  uint8_t const epnum = tu_edpt_number(desc_ep->bEndpointAddress);
+  uint8_t const dir   = tu_edpt_dir(desc_ep->bEndpointAddress);
+
+  TU_ASSERT(dcd_edpt_iso_activate);
+  TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX);
+  TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed));
+
+  _usbd_dev.ep_status[epnum][dir].stalled = false;
+  _usbd_dev.ep_status[epnum][dir].busy = false;
+  _usbd_dev.ep_status[epnum][dir].claimed = false;
+  return dcd_edpt_iso_activate(rhport, desc_ep);
+}
+
 #endif
diff --git a/src/device/usbd.h b/src/device/usbd.h
index 583962611..255e5a844 100644
--- a/src/device/usbd.h
+++ b/src/device/usbd.h
@@ -55,11 +55,14 @@ void tud_task (void)
   tud_task_ext(UINT32_MAX, false);
 }
 
-// Check if there is pending events need proccessing by tud_task()
+// Check if there is pending events need processing by tud_task()
 bool tud_task_event_ready(void);
 
-// Interrupt handler, name alias to DCD
+#ifndef _TUSB_DCD_H_
 extern void dcd_int_handler(uint8_t rhport);
+#endif
+
+// Interrupt handler, name alias to DCD
 #define tud_int_handler   dcd_int_handler
 
 // Get current bus speed
@@ -290,7 +293,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* MIDI Streaming (MS) Interface */\
   9, TUSB_DESC_INTERFACE, (uint8_t)((_itfnum) + 1), 0, 2, TUSB_CLASS_AUDIO, AUDIO_SUBCLASS_MIDI_STREAMING, AUDIO_FUNC_PROTOCOL_CODE_UNDEF, 0,\
   /* MS Header */\
-  7, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_HEADER, U16_TO_U8S_LE(0x0100), U16_TO_U8S_LE(7 + (_numcables) * TUD_MIDI_DESC_JACK_LEN)
+  7, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_HEADER, U16_TO_U8S_LE(0x0100), U16_TO_U8S_LE(7 + (_numcables) * TUD_MIDI_DESC_JACK_LEN + 2 * TUD_MIDI_DESC_EP_LEN(_numcables))
 
 #define TUD_MIDI_JACKID_IN_EMB(_cablenum) \
   (uint8_t)(((_cablenum) - 1) * 4 + 1)
@@ -305,15 +308,17 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   (uint8_t)(((_cablenum) - 1) * 4 + 4)
 
 #define TUD_MIDI_DESC_JACK_LEN (6 + 6 + 9 + 9)
-#define TUD_MIDI_DESC_JACK(_cablenum) \
+#define TUD_MIDI_DESC_JACK_DESC(_cablenum, _stridx) \
   /* MS In Jack (Embedded) */\
-  6, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_IN_JACK, MIDI_JACK_EMBEDDED, TUD_MIDI_JACKID_IN_EMB(_cablenum), 0,\
+  6, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_IN_JACK, MIDI_JACK_EMBEDDED, TUD_MIDI_JACKID_IN_EMB(_cablenum), _stridx,\
   /* MS In Jack (External) */\
-  6, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_IN_JACK, MIDI_JACK_EXTERNAL, TUD_MIDI_JACKID_IN_EXT(_cablenum), 0,\
+  6, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_IN_JACK, MIDI_JACK_EXTERNAL, TUD_MIDI_JACKID_IN_EXT(_cablenum), _stridx,\
   /* MS Out Jack (Embedded), connected to In Jack External */\
-  9, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_OUT_JACK, MIDI_JACK_EMBEDDED, TUD_MIDI_JACKID_OUT_EMB(_cablenum), 1, TUD_MIDI_JACKID_IN_EXT(_cablenum), 1, 0,\
+  9, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_OUT_JACK, MIDI_JACK_EMBEDDED, TUD_MIDI_JACKID_OUT_EMB(_cablenum), 1, TUD_MIDI_JACKID_IN_EXT(_cablenum), 1, _stridx,\
   /* MS Out Jack (External), connected to In Jack Embedded */\
-  9, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_OUT_JACK, MIDI_JACK_EXTERNAL, TUD_MIDI_JACKID_OUT_EXT(_cablenum), 1, TUD_MIDI_JACKID_IN_EMB(_cablenum), 1, 0
+  9, TUSB_DESC_CS_INTERFACE, MIDI_CS_INTERFACE_OUT_JACK, MIDI_JACK_EXTERNAL, TUD_MIDI_JACKID_OUT_EXT(_cablenum), 1, TUD_MIDI_JACKID_IN_EMB(_cablenum), 1, _stridx
+
+#define TUD_MIDI_DESC_JACK(_cablenum) TUD_MIDI_DESC_JACK_DESC(_cablenum, 0)
 
 #define TUD_MIDI_DESC_EP_LEN(_numcables) (9 + 4 + (_numcables))
 #define TUD_MIDI_DESC_EP(_epout, _epsize, _numcables) \
@@ -330,7 +335,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 // - 1 Embedded Jack out connected to 1 External Jack In
 #define TUD_MIDI_DESCRIPTOR(_itfnum, _stridx, _epout, _epin, _epsize) \
   TUD_MIDI_DESC_HEAD(_itfnum, _stridx, 1),\
-  TUD_MIDI_DESC_JACK(1),\
+  TUD_MIDI_DESC_JACK_DESC(1, 0),\
   TUD_MIDI_DESC_EP(_epout, _epsize, 1),\
   TUD_MIDI_JACKID_IN_EMB(1),\
   TUD_MIDI_DESC_EP(_epin, _epsize, 1),\
@@ -415,7 +420,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */
 #define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN 7
 #define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(_ep, _interval) \
-  TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_NO_SYNC | TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(4), _interval
+  TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_NO_SYNC | TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(4), _interval
 
 // AUDIO simple descriptor (UAC2) for 1 microphone input
 // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source
@@ -462,7 +467,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -511,7 +516,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -559,7 +564,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\
   /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\
@@ -599,7 +604,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 /* optional interrupt endpoint */ \
 // _int_pollingInterval : for LS/FS, expressed in frames (1ms each). 16 may be a good number?
 #define TUD_USBTMC_INT_DESCRIPTOR(_ep_interrupt, _ep_interrupt_size, _int_pollingInterval ) \
-  7, TUSB_DESC_ENDPOINT, _ep_interrupt, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_interrupt_size), 0x16
+  7, TUSB_DESC_ENDPOINT, _ep_interrupt, TUSB_XFER_INTERRUPT, U16_TO_U8S_LE(_ep_interrupt_size), _int_pollingInterval
 
 #define TUD_USBTMC_INT_DESCRIPTOR_LEN (7u)
 
@@ -644,7 +649,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 #define TUD_DFU_DESC_LEN(_alt_count)    (9 + (_alt_count) * 9)
 
 // Interface number, Alternate count, starting string index, attributes, detach timeout, transfer size
-// Note: Alternate count must be numberic or macro, string index is increased by one for each Alt interface
+// Note: Alternate count must be numeric or macro, string index is increased by one for each Alt interface
 #define TUD_DFU_DESCRIPTOR(_itfnum, _alt_count, _stridx, _attr, _timeout, _xfer_size) \
   TU_XSTRCAT(_TUD_DFU_ALT_,_alt_count)(_itfnum, 0, _stridx), \
   /* Function */ \
diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c
index 4f4108090..ea8eef285 100644
--- a/src/device/usbd_control.c
+++ b/src/device/usbd_control.c
@@ -28,9 +28,9 @@
 
 #if CFG_TUD_ENABLED
 
+#include "dcd.h"
 #include "tusb.h"
 #include "device/usbd_pvt.h"
-#include "dcd.h"
 
 #if CFG_TUSB_DEBUG >= 2
 extern void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback);
@@ -53,10 +53,10 @@ typedef struct
   usbd_control_xfer_cb_t complete_cb;
 } usbd_control_xfer_t;
 
-static usbd_control_xfer_t _ctrl_xfer;
+tu_static usbd_control_xfer_t _ctrl_xfer;
 
 CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN
-static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE];
+tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE];
 
 //--------------------------------------------------------------------+
 // Application API
@@ -93,7 +93,9 @@ static bool _data_stage_xact(uint8_t rhport)
   if ( _ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN )
   {
     ep_addr = EDPT_CTRL_IN;
-    if ( xact_len ) memcpy(_usbd_ctrl_buf, _ctrl_xfer.buffer, xact_len);
+    if ( xact_len ) {
+      TU_VERIFY(0 == tu_memcpy_s(_usbd_ctrl_buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len));
+    }
   }
 
   return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _usbd_ctrl_buf : NULL, xact_len);
@@ -189,7 +191,7 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result
     TU_LOG_MEM(2, _usbd_ctrl_buf, xferred_bytes, 2);
   }
 
-  _ctrl_xfer.total_xferred += xferred_bytes;
+  _ctrl_xfer.total_xferred += (uint16_t) xferred_bytes;
   _ctrl_xfer.buffer += xferred_bytes;
 
   // Data Stage is complete when all request's length are transferred or
diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h
index 29753451e..8393d3469 100644
--- a/src/device/usbd_pvt.h
+++ b/src/device/usbd_pvt.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -48,7 +48,7 @@ typedef struct
   uint16_t (* open             ) (uint8_t rhport, tusb_desc_interface_t const * desc_intf, uint16_t max_len);
   bool     (* control_xfer_cb  ) (uint8_t rhport, uint8_t stage, tusb_control_request_t const * request);
   bool     (* xfer_cb          ) (uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes);
-  void     (* sof              ) (uint8_t rhport); /* optional */
+  void     (* sof              ) (uint8_t rhport, uint32_t frame_count); // optional
 } usbd_class_driver_t;
 
 // Invoked when initializing device stack to get additional class drivers.
@@ -62,6 +62,7 @@ void usbd_int_set(bool enabled);
 
 //--------------------------------------------------------------------+
 // USBD Endpoint API
+// Note: rhport should be 0 since device stack only support 1 rhport for now
 //--------------------------------------------------------------------+
 
 // Open an endpoint
@@ -95,6 +96,12 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr);
 // Check if endpoint is stalled
 bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr);
 
+// Allocate packet buffer used by ISO endpoints
+bool usbd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size);
+
+// Configure and enable an ISO endpoint according to descriptor
+bool usbd_edpt_iso_activate(uint8_t rhport,  tusb_desc_endpoint_t const * p_endpoint_desc);
+
 // Check if endpoint is ready (not busy and not stalled)
 TU_ATTR_ALWAYS_INLINE static inline
 bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr)
@@ -102,6 +109,9 @@ bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr)
   return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr);
 }
 
+// Enable SOF interrupt
+void usbd_sof_enable(uint8_t rhport, bool en);
+
 /*------------------------------------------------------------------*/
 /* Helper
  *------------------------------------------------------------------*/