Merge branch 'master' into src/portable/synopsys/dwc2/fix_sof_int_handling

5 files changed, 445 insertions, 420 deletions

diff --git a/src/device/dcd.h b/src/device/dcd.h
index 3a7e6c5df..69c26bcf4 100644
--- a/src/device/dcd.h
+++ b/src/device/dcd.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -47,8 +47,7 @@
 // MACRO CONSTANT TYPEDEF PROTYPES
 //--------------------------------------------------------------------+
 
-typedef enum
-{
+typedef enum {
   DCD_EVENT_INVALID = 0,
   DCD_EVENT_BUS_RESET,
   DCD_EVENT_UNPLUGGED,
@@ -65,13 +64,11 @@ typedef enum
   DCD_EVENT_COUNT
 } dcd_eventid_t;
 
-typedef struct TU_ATTR_ALIGNED(4)
-{
+typedef struct TU_ATTR_ALIGNED(4) {
   uint8_t rhport;
   uint8_t event_id;
 
-  union
-  {
+  union {
     // BUS RESET
     struct {
       tusb_speed_t speed;
@@ -103,11 +100,27 @@ typedef struct TU_ATTR_ALIGNED(4)
 //TU_VERIFY_STATIC(sizeof(dcd_event_t) <= 12, "size is not correct");
 
 //--------------------------------------------------------------------+
+// Memory API
+//--------------------------------------------------------------------+
+
+// clean/flush data cache: write cache -> memory.
+// Required before an DMA TX transfer to make sure data is in memory
+void dcd_dcache_clean(void const* addr, uint32_t data_size) TU_ATTR_WEAK;
+
+// invalidate data cache: mark cache as invalid, next read will read from memory
+// Required BOTH before and after an DMA RX transfer
+void dcd_dcache_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK;
+
+// clean and invalidate data cache
+// Required before an DMA transfer where memory is both read/write by DMA
+void dcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_WEAK;
+
+//--------------------------------------------------------------------+
 // Controller API
 //--------------------------------------------------------------------+
 
 // Initialize controller to device mode
-void dcd_init       (uint8_t rhport);
+void dcd_init(uint8_t rhport);
 
 // Interrupt Handler
 void dcd_int_handler(uint8_t rhport);
@@ -139,7 +152,7 @@ void dcd_sof_enable(uint8_t rhport, bool en);
 
 // Invoked when a control transfer's status stage is complete.
 // May help DCD to prepare for next control transfer, this API is optional.
-void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request) TU_ATTR_WEAK;
+void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * request);
 
 // Configure endpoint's registers according to descriptor
 bool dcd_edpt_open            (uint8_t rhport, tusb_desc_endpoint_t const * desc_ep);
@@ -167,6 +180,13 @@ void dcd_edpt_stall           (uint8_t rhport, uint8_t ep_addr);
 // This API never calls with control endpoints, since it is auto cleared when receiving setup packet
 void dcd_edpt_clear_stall     (uint8_t rhport, uint8_t ep_addr);
 
+// Allocate packet buffer used by ISO endpoints
+// Some MCU need manual packet buffer allocation, we allocate the largest size to avoid clustering
+TU_ATTR_WEAK bool dcd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size);
+
+// Configure and enable an ISO endpoint according to descriptor
+TU_ATTR_WEAK bool dcd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc);
+
 //--------------------------------------------------------------------+
 // Event API (implemented by stack)
 //--------------------------------------------------------------------+
@@ -175,23 +195,20 @@ void dcd_edpt_clear_stall     (uint8_t rhport, uint8_t ep_addr);
 extern void dcd_event_handler(dcd_event_t const * event, bool in_isr);
 
 // helper to send bus signal event
-TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr)
-{
+TU_ATTR_ALWAYS_INLINE static inline void dcd_event_bus_signal (uint8_t rhport, dcd_eventid_t eid, bool in_isr) {
   dcd_event_t event = { .rhport = rhport, .event_id = eid };
   dcd_event_handler(&event, in_isr);
 }
 
 // helper to send bus reset event
-TU_ATTR_ALWAYS_INLINE static inline  void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr)
-{
+TU_ATTR_ALWAYS_INLINE static inline  void dcd_event_bus_reset (uint8_t rhport, tusb_speed_t speed, bool in_isr) {
   dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_BUS_RESET };
   event.bus_reset.speed = speed;
   dcd_event_handler(&event, in_isr);
 }
 
 // helper to send setup received
-TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr)
-{
+TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport, uint8_t const * setup, bool in_isr) {
   dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SETUP_RECEIVED };
   memcpy(&event.setup_received, setup, sizeof(tusb_control_request_t));
 
@@ -199,8 +216,7 @@ TU_ATTR_ALWAYS_INLINE static inline void dcd_event_setup_received(uint8_t rhport
 }
 
 // helper to send transfer complete event
-TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr)
-{
+TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport, uint8_t ep_addr, uint32_t xferred_bytes, uint8_t result, bool in_isr) {
   dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_XFER_COMPLETE };
 
   event.xfer_complete.ep_addr = ep_addr;
@@ -210,8 +226,7 @@ TU_ATTR_ALWAYS_INLINE static inline void dcd_event_xfer_complete (uint8_t rhport
   dcd_event_handler(&event, in_isr);
 }
 
-static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr)
-{
+TU_ATTR_ALWAYS_INLINE static inline void dcd_event_sof(uint8_t rhport, uint32_t frame_count, bool in_isr) {
   dcd_event_t event = { .rhport = rhport, .event_id = DCD_EVENT_SOF };
   event.sof.frame_count = frame_count;
   dcd_event_handler(&event, in_isr);
diff --git a/src/device/usbd.c b/src/device/usbd.c
index 384daccb8..5c94ebcc5 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -38,13 +38,18 @@
 //--------------------------------------------------------------------+
 // USBD Configuration
 //--------------------------------------------------------------------+
-
 #ifndef CFG_TUD_TASK_QUEUE_SZ
   #define CFG_TUD_TASK_QUEUE_SZ   16
 #endif
 
-// Debug level of USBD
-#define USBD_DBG   2
+//--------------------------------------------------------------------+
+// Callback weak stubs (called if application does not provide)
+//--------------------------------------------------------------------+
+TU_ATTR_WEAK void tud_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) {
+  (void)rhport;
+  (void)eventid;
+  (void)in_isr;
+}
 
 //--------------------------------------------------------------------+
 // Device Data
@@ -53,10 +58,8 @@
 // Invalid driver ID in itf2drv[] ep2drv[][] mapping
 enum { DRVID_INVALID = 0xFFu };
 
-typedef struct
-{
-  struct TU_ATTR_PACKED
-  {
+typedef struct {
+  struct TU_ATTR_PACKED {
     volatile uint8_t connected    : 1;
     volatile uint8_t addressed    : 1;
     volatile uint8_t suspended    : 1;
@@ -81,158 +84,157 @@ tu_static usbd_device_t _usbd_dev;
 //--------------------------------------------------------------------+
 // Class Driver
 //--------------------------------------------------------------------+
-#if CFG_TUSB_DEBUG >= 2
+#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL
   #define DRIVER_NAME(_name)    .name = _name,
 #else
   #define DRIVER_NAME(_name)
 #endif
 
 // Built-in class drivers
-tu_static usbd_class_driver_t const _usbd_driver[] =
-{
-  #if CFG_TUD_CDC
-  {
-    DRIVER_NAME("CDC")
-    .init             = cdcd_init,
-    .reset            = cdcd_reset,
-    .open             = cdcd_open,
-    .control_xfer_cb  = cdcd_control_xfer_cb,
-    .xfer_cb          = cdcd_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+tu_static usbd_class_driver_t const _usbd_driver[] = {
+    #if CFG_TUD_CDC
+    {
+        DRIVER_NAME("CDC")
+        .init             = cdcd_init,
+        .reset            = cdcd_reset,
+        .open             = cdcd_open,
+        .control_xfer_cb  = cdcd_control_xfer_cb,
+        .xfer_cb          = cdcd_xfer_cb,
+        .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_MSC
-  {
-    DRIVER_NAME("MSC")
-    .init             = mscd_init,
-    .reset            = mscd_reset,
-    .open             = mscd_open,
-    .control_xfer_cb  = mscd_control_xfer_cb,
-    .xfer_cb          = mscd_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_MSC
+    {
+        DRIVER_NAME("MSC")
+        .init             = mscd_init,
+        .reset            = mscd_reset,
+        .open             = mscd_open,
+        .control_xfer_cb  = mscd_control_xfer_cb,
+        .xfer_cb          = mscd_xfer_cb,
+        .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_HID
-  {
-    DRIVER_NAME("HID")
-    .init             = hidd_init,
-    .reset            = hidd_reset,
-    .open             = hidd_open,
-    .control_xfer_cb  = hidd_control_xfer_cb,
-    .xfer_cb          = hidd_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_HID
+    {
+      DRIVER_NAME("HID")
+      .init             = hidd_init,
+      .reset            = hidd_reset,
+      .open             = hidd_open,
+      .control_xfer_cb  = hidd_control_xfer_cb,
+      .xfer_cb          = hidd_xfer_cb,
+      .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_AUDIO
-  {
-    DRIVER_NAME("AUDIO")
-    .init             = audiod_init,
-    .reset            = audiod_reset,
-    .open             = audiod_open,
-    .control_xfer_cb  = audiod_control_xfer_cb,
-    .xfer_cb          = audiod_xfer_cb,
-    .sof              = audiod_sof_isr
-  },
-  #endif
+    #if CFG_TUD_AUDIO
+    {
+      DRIVER_NAME("AUDIO")
+      .init             = audiod_init,
+      .reset            = audiod_reset,
+      .open             = audiod_open,
+      .control_xfer_cb  = audiod_control_xfer_cb,
+      .xfer_cb          = audiod_xfer_cb,
+      .sof              = audiod_sof_isr
+    },
+    #endif
 
-  #if CFG_TUD_VIDEO
-  {
-    DRIVER_NAME("VIDEO")
-    .init             = videod_init,
-    .reset            = videod_reset,
-    .open             = videod_open,
-    .control_xfer_cb  = videod_control_xfer_cb,
-    .xfer_cb          = videod_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_VIDEO
+    {
+      DRIVER_NAME("VIDEO")
+      .init             = videod_init,
+      .reset            = videod_reset,
+      .open             = videod_open,
+      .control_xfer_cb  = videod_control_xfer_cb,
+      .xfer_cb          = videod_xfer_cb,
+      .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_MIDI
-  {
-    DRIVER_NAME("MIDI")
-    .init             = midid_init,
-    .open             = midid_open,
-    .reset            = midid_reset,
-    .control_xfer_cb  = midid_control_xfer_cb,
-    .xfer_cb          = midid_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_MIDI
+    {
+      DRIVER_NAME("MIDI")
+      .init             = midid_init,
+      .open             = midid_open,
+      .reset            = midid_reset,
+      .control_xfer_cb  = midid_control_xfer_cb,
+      .xfer_cb          = midid_xfer_cb,
+      .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_VENDOR
-  {
-    DRIVER_NAME("VENDOR")
-    .init             = vendord_init,
-    .reset            = vendord_reset,
-    .open             = vendord_open,
-    .control_xfer_cb  = tud_vendor_control_xfer_cb,
-    .xfer_cb          = vendord_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_VENDOR
+    {
+      DRIVER_NAME("VENDOR")
+      .init             = vendord_init,
+      .reset            = vendord_reset,
+      .open             = vendord_open,
+      .control_xfer_cb  = tud_vendor_control_xfer_cb,
+      .xfer_cb          = vendord_xfer_cb,
+      .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_USBTMC
-  {
-    DRIVER_NAME("TMC")
-    .init             = usbtmcd_init_cb,
-    .reset            = usbtmcd_reset_cb,
-    .open             = usbtmcd_open_cb,
-    .control_xfer_cb  = usbtmcd_control_xfer_cb,
-    .xfer_cb          = usbtmcd_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_USBTMC
+    {
+      DRIVER_NAME("TMC")
+      .init             = usbtmcd_init_cb,
+      .reset            = usbtmcd_reset_cb,
+      .open             = usbtmcd_open_cb,
+      .control_xfer_cb  = usbtmcd_control_xfer_cb,
+      .xfer_cb          = usbtmcd_xfer_cb,
+      .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_DFU_RUNTIME
-  {
-    DRIVER_NAME("DFU-RUNTIME")
-    .init             = dfu_rtd_init,
-    .reset            = dfu_rtd_reset,
-    .open             = dfu_rtd_open,
-    .control_xfer_cb  = dfu_rtd_control_xfer_cb,
-    .xfer_cb          = NULL,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_DFU_RUNTIME
+    {
+      DRIVER_NAME("DFU-RUNTIME")
+      .init             = dfu_rtd_init,
+      .reset            = dfu_rtd_reset,
+      .open             = dfu_rtd_open,
+      .control_xfer_cb  = dfu_rtd_control_xfer_cb,
+      .xfer_cb          = NULL,
+      .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_DFU
-  {
-    DRIVER_NAME("DFU")
-    .init             = dfu_moded_init,
-    .reset            = dfu_moded_reset,
-    .open             = dfu_moded_open,
-    .control_xfer_cb  = dfu_moded_control_xfer_cb,
-    .xfer_cb          = NULL,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_DFU
+    {
+      DRIVER_NAME("DFU")
+      .init             = dfu_moded_init,
+      .reset            = dfu_moded_reset,
+      .open             = dfu_moded_open,
+      .control_xfer_cb  = dfu_moded_control_xfer_cb,
+      .xfer_cb          = NULL,
+      .sof              = NULL
+    },
+    #endif
 
-  #if CFG_TUD_ECM_RNDIS || CFG_TUD_NCM
-  {
-    DRIVER_NAME("NET")
-    .init             = netd_init,
-    .reset            = netd_reset,
-    .open             = netd_open,
-    .control_xfer_cb  = netd_control_xfer_cb,
-    .xfer_cb          = netd_xfer_cb,
-    .sof                  = NULL,
-  },
-  #endif
+    #if CFG_TUD_ECM_RNDIS || CFG_TUD_NCM
+    {
+      DRIVER_NAME("NET")
+      .init             = netd_init,
+      .reset            = netd_reset,
+      .open             = netd_open,
+      .control_xfer_cb  = netd_control_xfer_cb,
+      .xfer_cb          = netd_xfer_cb,
+      .sof                  = NULL,
+    },
+    #endif
 
-  #if CFG_TUD_BTH
-  {
-    DRIVER_NAME("BTH")
-    .init             = btd_init,
-    .reset            = btd_reset,
-    .open             = btd_open,
-    .control_xfer_cb  = btd_control_xfer_cb,
-    .xfer_cb          = btd_xfer_cb,
-    .sof              = NULL
-  },
-  #endif
+    #if CFG_TUD_BTH
+    {
+      DRIVER_NAME("BTH")
+      .init             = btd_init,
+      .reset            = btd_reset,
+      .open             = btd_open,
+      .control_xfer_cb  = btd_control_xfer_cb,
+      .xfer_cb          = btd_xfer_cb,
+      .sof              = NULL
+    },
+    #endif
 };
 
 enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(_usbd_driver) };
@@ -241,25 +243,21 @@ enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(_usbd_driver) };
 tu_static usbd_class_driver_t const * _app_driver = NULL;
 tu_static uint8_t _app_driver_count = 0;
 
+#define TOTAL_DRIVER_COUNT    (_app_driver_count + BUILTIN_DRIVER_COUNT)
+
 // virtually joins built-in and application drivers together.
 // Application is positioned first to allow overwriting built-in ones.
-static inline usbd_class_driver_t const * get_driver(uint8_t drvid)
-{
-  // Application drivers
-  if ( usbd_app_driver_get_cb )
-  {
-    if ( drvid < _app_driver_count ) return &_app_driver[drvid];
-    drvid -= _app_driver_count;
+TU_ATTR_ALWAYS_INLINE static inline usbd_class_driver_t const * get_driver(uint8_t drvid) {
+  usbd_class_driver_t const * driver = NULL;
+  if ( drvid < _app_driver_count ) {
+    // Application drivers
+    driver = &_app_driver[drvid];
+  } else if ( drvid < TOTAL_DRIVER_COUNT && BUILTIN_DRIVER_COUNT > 0 ){
+    driver = &_usbd_driver[drvid - _app_driver_count];
   }
-
-  // Built-in drivers
-  if (drvid < BUILTIN_DRIVER_COUNT) return &_usbd_driver[drvid];
-
-  return NULL;
+  return driver;
 }
 
-#define TOTAL_DRIVER_COUNT    (_app_driver_count + BUILTIN_DRIVER_COUNT)
-
 //--------------------------------------------------------------------+
 // DCD Event
 //--------------------------------------------------------------------+
@@ -280,6 +278,11 @@ tu_static osal_queue_t _usbd_q;
   #define _usbd_mutex   NULL
 #endif
 
+TU_ATTR_ALWAYS_INLINE static inline bool queue_event(dcd_event_t const * event, bool in_isr) {
+  bool ret = osal_queue_send(_usbd_q, event, in_isr);
+  tud_event_hook_cb(event->rhport, event->event_id, in_isr);
+  return ret;
+}
 
 //--------------------------------------------------------------------+
 // Prototypes
@@ -298,29 +301,25 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t event,
 //--------------------------------------------------------------------+
 // Debug
 //--------------------------------------------------------------------+
-#if CFG_TUSB_DEBUG >= 2
-tu_static char const* const _usbd_event_str[DCD_EVENT_COUNT] =
-{
-  "Invalid"        ,
-  "Bus Reset"      ,
-  "Unplugged"      ,
-  "SOF"            ,
-  "Suspend"        ,
-  "Resume"         ,
-  "Setup Received" ,
-  "Xfer Complete"  ,
-  "Func Call"
+#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL
+tu_static char const* const _usbd_event_str[DCD_EVENT_COUNT] = {
+    "Invalid",
+    "Bus Reset",
+    "Unplugged",
+    "SOF",
+    "Suspend",
+    "Resume",
+    "Setup Received",
+    "Xfer Complete",
+    "Func Call"
 };
 
 // for usbd_control to print the name of control complete driver
-void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback)
-{
-  for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++)
-  {
-    usbd_class_driver_t const * driver = get_driver(i);
-    if ( driver && driver->control_xfer_cb == callback )
-    {
-      TU_LOG(USBD_DBG, "  %s control complete\r\n", driver->name);
+void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback) {
+  for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) {
+    usbd_class_driver_t const* driver = get_driver(i);
+    if (driver && driver->control_xfer_cb == callback) {
+      TU_LOG_USBD("  %s control complete\r\n", driver->name);
       return;
     }
   }
@@ -331,43 +330,36 @@ void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback)
 //--------------------------------------------------------------------+
 // Application API
 //--------------------------------------------------------------------+
-tusb_speed_t tud_speed_get(void)
-{
+tusb_speed_t tud_speed_get(void) {
   return (tusb_speed_t) _usbd_dev.speed;
 }
 
-bool tud_connected(void)
-{
+bool tud_connected(void) {
   return _usbd_dev.connected;
 }
 
-bool tud_mounted(void)
-{
+bool tud_mounted(void) {
   return _usbd_dev.cfg_num ? true : false;
 }
 
-bool tud_suspended(void)
-{
+bool tud_suspended(void) {
   return _usbd_dev.suspended;
 }
 
-bool tud_remote_wakeup(void)
-{
+bool tud_remote_wakeup(void) {
   // only wake up host if this feature is supported and enabled and we are suspended
-  TU_VERIFY (_usbd_dev.suspended && _usbd_dev.remote_wakeup_support && _usbd_dev.remote_wakeup_en );
+  TU_VERIFY (_usbd_dev.suspended && _usbd_dev.remote_wakeup_support && _usbd_dev.remote_wakeup_en);
   dcd_remote_wakeup(_usbd_rhport);
   return true;
 }
 
-bool tud_disconnect(void)
-{
+bool tud_disconnect(void) {
   TU_VERIFY(dcd_disconnect);
   dcd_disconnect(_usbd_rhport);
   return true;
 }
 
-bool tud_connect(void)
-{
+bool tud_connect(void) {
   TU_VERIFY(dcd_connect);
   dcd_connect(_usbd_rhport);
   return true;
@@ -376,8 +368,7 @@ bool tud_connect(void)
 //--------------------------------------------------------------------+
 // USBD Task
 //--------------------------------------------------------------------+
-bool tud_inited(void)
-{
+bool tud_inited(void) {
   return _usbd_rhport != RHPORT_INVALID;
 }
 
@@ -386,10 +377,10 @@ bool tud_init (uint8_t rhport)
   // skip if already initialized
   if ( tud_inited() ) return true;
 
-  TU_LOG(USBD_DBG, "USBD init on controller %u\r\n", rhport);
-  TU_LOG_INT(USBD_DBG, sizeof(usbd_device_t));
-  TU_LOG_INT(USBD_DBG, sizeof(tu_fifo_t));
-  TU_LOG_INT(USBD_DBG, sizeof(tu_edpt_stream_t));
+  TU_LOG_USBD("USBD init on controller %u\r\n", rhport);
+  TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(usbd_device_t));
+  TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_fifo_t));
+  TU_LOG_INT(CFG_TUD_LOG_LEVEL, sizeof(tu_edpt_stream_t));
 
   tu_varclr(&_usbd_dev);
 
@@ -414,7 +405,7 @@ bool tud_init (uint8_t rhport)
   {
     usbd_class_driver_t const * driver = get_driver(i);
     TU_ASSERT(driver);
-    TU_LOG(USBD_DBG, "%s init\r\n", driver->name);
+    TU_LOG_USBD("%s init\r\n", driver->name);
     driver->init();
   }
 
@@ -450,7 +441,7 @@ static void usbd_reset(uint8_t rhport)
 bool tud_task_event_ready(void)
 {
   // Skip if stack is not initialized
-  if ( !tusb_inited() ) return false;
+  if ( !tud_inited() ) return false;
 
   return !osal_queue_empty(_usbd_q);
 }
@@ -478,7 +469,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
   (void) in_isr; // not implemented yet
 
   // Skip if stack is not initialized
-  if ( !tusb_inited() ) return;
+  if ( !tud_inited() ) return;
 
   // Loop until there is no more events in the queue
   while (1)
@@ -486,21 +477,21 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
     dcd_event_t event;
     if ( !osal_queue_receive(_usbd_q, &event, timeout_ms) ) return;
 
-#if CFG_TUSB_DEBUG >= 2
-    if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG(USBD_DBG, "\r\n"); // extra line for setup
-    TU_LOG(USBD_DBG, "USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED");
+#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL
+    if (event.event_id == DCD_EVENT_SETUP_RECEIVED) TU_LOG_USBD("\r\n"); // extra line for setup
+    TU_LOG_USBD("USBD %s ", event.event_id < DCD_EVENT_COUNT ? _usbd_event_str[event.event_id] : "CORRUPTED");
 #endif
 
     switch ( event.event_id )
     {
       case DCD_EVENT_BUS_RESET:
-        TU_LOG(USBD_DBG, ": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]);
+        TU_LOG_USBD(": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]);
         usbd_reset(event.rhport);
         _usbd_dev.speed = event.bus_reset.speed;
       break;
 
       case DCD_EVENT_UNPLUGGED:
-        TU_LOG(USBD_DBG, "\r\n");
+        TU_LOG_USBD("\r\n");
         usbd_reset(event.rhport);
 
         // invoke callback
@@ -508,23 +499,23 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
       break;
 
       case DCD_EVENT_SETUP_RECEIVED:
-        TU_LOG_PTR(USBD_DBG, &event.setup_received);
-        TU_LOG(USBD_DBG, "\r\n");
+        TU_LOG_BUF(CFG_TUD_LOG_LEVEL, &event.setup_received, 8);
+        TU_LOG_USBD("\r\n");
 
         // Mark as connected after receiving 1st setup packet.
         // But it is easier to set it every time instead of wasting time to check then set
         _usbd_dev.connected = 1;
 
         // mark both in & out control as free
-        _usbd_dev.ep_status[0][TUSB_DIR_OUT].busy = false;
+        _usbd_dev.ep_status[0][TUSB_DIR_OUT].busy = 0;
         _usbd_dev.ep_status[0][TUSB_DIR_OUT].claimed = 0;
-        _usbd_dev.ep_status[0][TUSB_DIR_IN ].busy = false;
+        _usbd_dev.ep_status[0][TUSB_DIR_IN ].busy = 0;
         _usbd_dev.ep_status[0][TUSB_DIR_IN ].claimed = 0;
 
         // Process control request
         if ( !process_control_request(event.rhport, &event.setup_received) )
         {
-          TU_LOG(USBD_DBG, "  Stall EP0\r\n");
+          TU_LOG_USBD("  Stall EP0\r\n");
           // Failed -> stall both control endpoint IN and OUT
           dcd_edpt_stall(event.rhport, 0);
           dcd_edpt_stall(event.rhport, 0 | TUSB_DIR_IN_MASK);
@@ -538,22 +529,23 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
         uint8_t const epnum   = tu_edpt_number(ep_addr);
         uint8_t const ep_dir  = tu_edpt_dir(ep_addr);
 
-        TU_LOG(USBD_DBG, "on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len);
+        TU_LOG_USBD("on EP %02X with %u bytes\r\n", ep_addr, (unsigned int) event.xfer_complete.len);
 
-        _usbd_dev.ep_status[epnum][ep_dir].busy = false;
+        _usbd_dev.ep_status[epnum][ep_dir].busy = 0;
         _usbd_dev.ep_status[epnum][ep_dir].claimed = 0;
 
         if ( 0 == epnum )
         {
-          usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t)event.xfer_complete.result, event.xfer_complete.len);
+          usbd_control_xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete
+          .len);
         }
         else
         {
           usbd_class_driver_t const * driver = get_driver( _usbd_dev.ep2drv[epnum][ep_dir] );
           TU_ASSERT(driver, );
 
-          TU_LOG(USBD_DBG, "  %s xfer callback\r\n", driver->name);
-          driver->xfer_cb(event.rhport, ep_addr, (xfer_result_t)event.xfer_complete.result, event.xfer_complete.len);
+          TU_LOG_USBD("  %s xfer callback\r\n", driver->name);
+          driver->xfer_cb(event.rhport, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len);
         }
       }
       break;
@@ -564,27 +556,27 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
         // e.g suspend -> resume -> unplug/plug. Skip suspend/resume if not connected
         if ( _usbd_dev.connected )
         {
-          TU_LOG(USBD_DBG, ": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en);
+          TU_LOG_USBD(": Remote Wakeup = %u\r\n", _usbd_dev.remote_wakeup_en);
           if (tud_suspend_cb) tud_suspend_cb(_usbd_dev.remote_wakeup_en);
         }else
         {
-          TU_LOG(USBD_DBG, " Skipped\r\n");
+          TU_LOG_USBD(" Skipped\r\n");
         }
       break;
 
       case DCD_EVENT_RESUME:
         if ( _usbd_dev.connected )
         {
-          TU_LOG(USBD_DBG, "\r\n");
+          TU_LOG_USBD("\r\n");
           if (tud_resume_cb) tud_resume_cb();
         }else
         {
-          TU_LOG(USBD_DBG, " Skipped\r\n");
+          TU_LOG_USBD(" Skipped\r\n");
         }
       break;
 
       case USBD_EVENT_FUNC_CALL:
-        TU_LOG(USBD_DBG, "\r\n");
+        TU_LOG_USBD("\r\n");
         if ( event.func_call.func ) event.func_call.func(event.func_call.param);
       break;
 
@@ -609,7 +601,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr)
 static bool invoke_class_control(uint8_t rhport, usbd_class_driver_t const * driver, tusb_control_request_t const * request)
 {
   usbd_control_set_complete_callback(driver->control_xfer_cb);
-  TU_LOG(USBD_DBG, "  %s control request\r\n", driver->name);
+  TU_LOG_USBD("  %s control request\r\n", driver->name);
   return driver->control_xfer_cb(rhport, CONTROL_STAGE_SETUP, request);
 }
 
@@ -630,11 +622,11 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
     return tud_vendor_control_xfer_cb(rhport, CONTROL_STAGE_SETUP, p_request);
   }
 
-#if CFG_TUSB_DEBUG >= 2
+#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL
   if (TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && p_request->bRequest <= TUSB_REQ_SYNCH_FRAME)
   {
-    TU_LOG(USBD_DBG, "  %s", tu_str_std_request[p_request->bRequest]);
-    if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG(USBD_DBG, "\r\n");
+    TU_LOG_USBD("  %s", tu_str_std_request[p_request->bRequest]);
+    if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG_USBD("\r\n");
   }
 #endif
 
@@ -690,7 +682,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
             if ( _usbd_dev.cfg_num )
             {
               // already configured: need to clear all endpoints and driver first
-              TU_LOG(USBD_DBG, "  Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num);
+              TU_LOG_USBD("  Clear current Configuration (%u) before switching\r\n", _usbd_dev.cfg_num);
 
               // close all non-control endpoints, cancel all pending transfers if any
               dcd_edpt_close_all(rhport);
@@ -702,8 +694,18 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
               _usbd_dev.speed = speed; // restore speed
             }
 
-            // switch to new configuration if not zero
-            if ( cfg_num ) TU_ASSERT( process_set_config(rhport, cfg_num) );
+            // Handle the new configuration and execute the corresponding callback
+            if ( cfg_num )
+            {
+              // switch to new configuration if not zero
+              TU_ASSERT( process_set_config(rhport, cfg_num) );
+
+              if ( tud_mount_cb ) tud_mount_cb();
+            }
+            else
+            {
+              if ( tud_umount_cb ) tud_umount_cb();
+            }
           }
 
           _usbd_dev.cfg_num = cfg_num;
@@ -719,7 +721,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
           // Only support remote wakeup for device feature
           TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue);
 
-          TU_LOG(USBD_DBG, "    Enable Remote Wakeup\r\n");
+          TU_LOG_USBD("    Enable Remote Wakeup\r\n");
 
           // Host may enable remote wake up before suspending especially HID device
           _usbd_dev.remote_wakeup_en = true;
@@ -730,7 +732,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
           // Only support remote wakeup for device feature
           TU_VERIFY(TUSB_REQ_FEATURE_REMOTE_WAKEUP == p_request->wValue);
 
-          TU_LOG(USBD_DBG, "    Disable Remote Wakeup\r\n");
+          TU_LOG_USBD("    Disable Remote Wakeup\r\n");
 
           // Host may disable remote wake up after resuming
           _usbd_dev.remote_wakeup_en = false;
@@ -913,7 +915,7 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num)
       if ( (sizeof(tusb_desc_interface_t) <= drv_len)  && (drv_len <= remaining_len) )
       {
         // Open successfully
-        TU_LOG(USBD_DBG, "  %s opened\r\n", driver->name);
+        TU_LOG_USBD("  %s opened\r\n", driver->name);
 
         // Some drivers use 2 or more interfaces but may not have IAD e.g MIDI (always) or
         // BTH (even CDC) with class in device descriptor (single interface)
@@ -956,9 +958,6 @@ static bool process_set_config(uint8_t rhport, uint8_t cfg_num)
     TU_ASSERT(drv_id < TOTAL_DRIVER_COUNT);
   }
 
-  // invoke callback
-  if (tud_mount_cb) tud_mount_cb();
-
   return true;
 }
 
@@ -972,7 +971,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
   {
     case TUSB_DESC_DEVICE:
     {
-      TU_LOG(USBD_DBG, " Device\r\n");
+      TU_LOG_USBD(" Device\r\n");
 
       void* desc_device = (void*) (uintptr_t) tud_descriptor_device_cb();
 
@@ -996,7 +995,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
     case TUSB_DESC_BOS:
     {
-      TU_LOG(USBD_DBG, " BOS\r\n");
+      TU_LOG_USBD(" BOS\r\n");
 
       // requested by host if USB > 2.0 ( i.e 2.1 or 3.x )
       if (!tud_descriptor_bos_cb) return false;
@@ -1018,12 +1017,12 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
       if ( desc_type == TUSB_DESC_CONFIGURATION )
       {
-        TU_LOG(USBD_DBG, " Configuration[%u]\r\n", desc_index);
+        TU_LOG_USBD(" Configuration[%u]\r\n", desc_index);
         desc_config = (uintptr_t) tud_descriptor_configuration_cb(desc_index);
       }else
       {
         // Host only request this after getting Device Qualifier descriptor
-        TU_LOG(USBD_DBG, " Other Speed Configuration\r\n");
+        TU_LOG_USBD(" Other Speed Configuration\r\n");
         TU_VERIFY( tud_descriptor_other_speed_configuration_cb );
         desc_config = (uintptr_t) tud_descriptor_other_speed_configuration_cb(desc_index);
       }
@@ -1039,7 +1038,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
     case TUSB_DESC_STRING:
     {
-      TU_LOG(USBD_DBG, " String[%u]\r\n", desc_index);
+      TU_LOG_USBD(" String[%u]\r\n", desc_index);
 
       // String Descriptor always uses the desc set from user
       uint8_t const* desc_str = (uint8_t const*) tud_descriptor_string_cb(desc_index, tu_le16toh(p_request->wIndex));
@@ -1052,7 +1051,7 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 
     case TUSB_DESC_DEVICE_QUALIFIER:
     {
-      TU_LOG(USBD_DBG, " Device Qualifier\r\n");
+      TU_LOG_USBD(" Device Qualifier\r\n");
 
       TU_VERIFY( tud_descriptor_device_qualifier_cb );
 
@@ -1071,66 +1070,64 @@ static bool process_get_descriptor(uint8_t rhport, tusb_control_request_t const
 //--------------------------------------------------------------------+
 // DCD Event Handler
 //--------------------------------------------------------------------+
-TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const * event, bool in_isr)
-{
-  switch (event->event_id)
-  {
+TU_ATTR_FAST_FUNC void dcd_event_handler(dcd_event_t const* event, bool in_isr) {
+  bool send = false;
+  switch (event->event_id) {
     case DCD_EVENT_UNPLUGGED:
-      _usbd_dev.connected  = 0;
-      _usbd_dev.addressed  = 0;
-      _usbd_dev.cfg_num    = 0;
-      _usbd_dev.suspended  = 0;
-      osal_queue_send(_usbd_q, event, in_isr);
-    break;
+      _usbd_dev.connected = 0;
+      _usbd_dev.addressed = 0;
+      _usbd_dev.cfg_num = 0;
+      _usbd_dev.suspended = 0;
+      send = true;
+      break;
 
     case DCD_EVENT_SUSPEND:
       // NOTE: When plugging/unplugging device, the D+/D- state are unstable and
       // can accidentally meet the SUSPEND condition ( Bus Idle for 3ms ).
       // In addition, some MCUs such as SAMD or boards that haven no VBUS detection cannot distinguish
       // suspended vs disconnected. We will skip handling SUSPEND/RESUME event if not currently connected
-      if ( _usbd_dev.connected )
-      {
+      if (_usbd_dev.connected) {
         _usbd_dev.suspended = 1;
-        osal_queue_send(_usbd_q, event, in_isr);
+        send = true;
       }
-    break;
+      break;
 
     case DCD_EVENT_RESUME:
       // skip event if not connected (especially required for SAMD)
-      if ( _usbd_dev.connected )
-      {
+      if (_usbd_dev.connected) {
         _usbd_dev.suspended = 0;
-        osal_queue_send(_usbd_q, event, in_isr);
+        send = true;
       }
-    break;
+      break;
 
     case DCD_EVENT_SOF:
-      // SOF driver handler in ISR context
-      for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++)
-      {
-        usbd_class_driver_t const * driver = get_driver(i);
-        if (driver && driver->sof)
-        {
-          driver->sof(event->rhport, event->sof.frame_count);
-        }
-      }
-
       // Some MCUs after running dcd_remote_wakeup() does not have way to detect the end of remote wakeup
       // which last 1-15 ms. DCD can use SOF as a clear indicator that bus is back to operational
-      if ( _usbd_dev.suspended )
-      {
+      if (_usbd_dev.suspended) {
         _usbd_dev.suspended = 0;
 
-        dcd_event_t const event_resume = { .rhport = event->rhport, .event_id = DCD_EVENT_RESUME };
-        osal_queue_send(_usbd_q, &event_resume, in_isr);
+        dcd_event_t const event_resume = {.rhport = event->rhport, .event_id = DCD_EVENT_RESUME};
+        queue_event(&event_resume, in_isr);
+      }
+
+      // SOF driver handler in ISR context
+      for (uint8_t i = 0; i < TOTAL_DRIVER_COUNT; i++) {
+        usbd_class_driver_t const* driver = get_driver(i);
+        if (driver && driver->sof) {
+          driver->sof(event->rhport, event->sof.frame_count);
+        }
       }
 
       // skip osal queue for SOF in usbd task
-    break;
+      break;
 
     default:
-      osal_queue_send(_usbd_q, event, in_isr);
-    break;
+      send = true;
+      break;
+  }
+
+  if (send) {
+    queue_event(event, in_isr);
   }
 }
 
@@ -1174,18 +1171,15 @@ bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count
 }
 
 // Helper to defer an isr function
-void usbd_defer_func(osal_task_func_t func, void* param, bool in_isr)
-{
-  dcd_event_t event =
-  {
+void usbd_defer_func(osal_task_func_t func, void* param, bool in_isr) {
+  dcd_event_t event = {
       .rhport   = 0,
       .event_id = USBD_EVENT_FUNC_CALL,
   };
-
   event.func_call.func  = func;
   event.func_call.param = param;
 
-  dcd_event_handler(&event, in_isr);
+  queue_event(&event, in_isr);
 }
 
 //--------------------------------------------------------------------+
@@ -1237,14 +1231,14 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
   // TODO skip ready() check for now since enumeration also use this API
   // TU_VERIFY(tud_ready());
 
-  TU_LOG(USBD_DBG, "  Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes);
+  TU_LOG_USBD("  Queue EP %02X with %u bytes ...\r\n", ep_addr, total_bytes);
 
   // Attempt to transfer on a busy endpoint, sound like an race condition !
   TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0);
 
   // Set busy first since the actual transfer can be complete before dcd_edpt_xfer()
   // could return and USBD task can preempt and clear the busy
-  _usbd_dev.ep_status[epnum][dir].busy = true;
+  _usbd_dev.ep_status[epnum][dir].busy = 1;
 
   if ( dcd_edpt_xfer(rhport, ep_addr, buffer, total_bytes) )
   {
@@ -1252,9 +1246,9 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t
   }else
   {
     // DCD error, mark endpoint as ready to allow next transfer
-    _usbd_dev.ep_status[epnum][dir].busy = false;
+    _usbd_dev.ep_status[epnum][dir].busy = 0;
     _usbd_dev.ep_status[epnum][dir].claimed = 0;
-    TU_LOG(USBD_DBG, "FAILED\r\n");
+    TU_LOG_USBD("FAILED\r\n");
     TU_BREAKPOINT();
     return false;
   }
@@ -1271,25 +1265,25 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
-  TU_LOG(USBD_DBG, "  Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes);
+  TU_LOG_USBD("  Queue ISO EP %02X with %u bytes ... ", ep_addr, total_bytes);
 
   // Attempt to transfer on a busy endpoint, sound like an race condition !
   TU_ASSERT(_usbd_dev.ep_status[epnum][dir].busy == 0);
 
   // Set busy first since the actual transfer can be complete before dcd_edpt_xfer() could return
   // and usbd task can preempt and clear the busy
-  _usbd_dev.ep_status[epnum][dir].busy = true;
+  _usbd_dev.ep_status[epnum][dir].busy = 1;
 
   if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes))
   {
-    TU_LOG(USBD_DBG, "OK\r\n");
+    TU_LOG_USBD("OK\r\n");
     return true;
   }else
   {
     // DCD error, mark endpoint as ready to allow next transfer
-    _usbd_dev.ep_status[epnum][dir].busy = false;
+    _usbd_dev.ep_status[epnum][dir].busy = 0;
     _usbd_dev.ep_status[epnum][dir].claimed = 0;
-    TU_LOG(USBD_DBG, "failed\r\n");
+    TU_LOG_USBD("failed\r\n");
     TU_BREAKPOINT();
     return false;
   }
@@ -1315,10 +1309,10 @@ void usbd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
   // only stalled if currently cleared
   if ( !_usbd_dev.ep_status[epnum][dir].stalled )
   {
-    TU_LOG(USBD_DBG, "    Stall EP %02X\r\n", ep_addr);
+    TU_LOG_USBD("    Stall EP %02X\r\n", ep_addr);
     dcd_edpt_stall(rhport, ep_addr);
-    _usbd_dev.ep_status[epnum][dir].stalled = true;
-    _usbd_dev.ep_status[epnum][dir].busy = true;
+    _usbd_dev.ep_status[epnum][dir].stalled = 1;
+    _usbd_dev.ep_status[epnum][dir].busy = 1;
   }
 }
 
@@ -1332,10 +1326,10 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
   // only clear if currently stalled
   if ( _usbd_dev.ep_status[epnum][dir].stalled )
   {
-    TU_LOG(USBD_DBG, "    Clear Stall EP %02X\r\n", ep_addr);
+    TU_LOG_USBD("    Clear Stall EP %02X\r\n", ep_addr);
     dcd_edpt_clear_stall(rhport, ep_addr);
-    _usbd_dev.ep_status[epnum][dir].stalled = false;
-    _usbd_dev.ep_status[epnum][dir].busy = false;
+    _usbd_dev.ep_status[epnum][dir].stalled = 0;
+    _usbd_dev.ep_status[epnum][dir].busy = 0;
   }
 }
 
@@ -1360,15 +1354,15 @@ void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr)
   rhport = _usbd_rhport;
 
   TU_ASSERT(dcd_edpt_close, /**/);
-  TU_LOG(USBD_DBG, "  CLOSING Endpoint: 0x%02X\r\n", ep_addr);
+  TU_LOG_USBD("  CLOSING Endpoint: 0x%02X\r\n", ep_addr);
 
   uint8_t const epnum = tu_edpt_number(ep_addr);
   uint8_t const dir   = tu_edpt_dir(ep_addr);
 
   dcd_edpt_close(rhport, ep_addr);
-  _usbd_dev.ep_status[epnum][dir].stalled = false;
-  _usbd_dev.ep_status[epnum][dir].busy = false;
-  _usbd_dev.ep_status[epnum][dir].claimed = false;
+  _usbd_dev.ep_status[epnum][dir].stalled = 0;
+  _usbd_dev.ep_status[epnum][dir].busy = 0;
+  _usbd_dev.ep_status[epnum][dir].claimed = 0;
 
   return;
 }
@@ -1382,4 +1376,31 @@ void usbd_sof_enable(uint8_t rhport, bool en)
   dcd_sof_enable(rhport, en);
 }
 
+bool usbd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size)
+{
+  rhport = _usbd_rhport;
+
+  TU_ASSERT(dcd_edpt_iso_alloc);
+  TU_ASSERT(tu_edpt_number(ep_addr) < CFG_TUD_ENDPPOINT_MAX);
+
+  return dcd_edpt_iso_alloc(rhport, ep_addr, largest_packet_size);
+}
+
+bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep)
+{
+  rhport = _usbd_rhport;
+
+  uint8_t const epnum = tu_edpt_number(desc_ep->bEndpointAddress);
+  uint8_t const dir   = tu_edpt_dir(desc_ep->bEndpointAddress);
+
+  TU_ASSERT(dcd_edpt_iso_activate);
+  TU_ASSERT(epnum < CFG_TUD_ENDPPOINT_MAX);
+  TU_ASSERT(tu_edpt_validate(desc_ep, (tusb_speed_t) _usbd_dev.speed));
+
+  _usbd_dev.ep_status[epnum][dir].stalled = 0;
+  _usbd_dev.ep_status[epnum][dir].busy = 0;
+  _usbd_dev.ep_status[epnum][dir].claimed = 0;
+  return dcd_edpt_iso_activate(rhport, desc_ep);
+}
+
 #endif
diff --git a/src/device/usbd.h b/src/device/usbd.h
index ad19d1045..3ab6c813f 100644
--- a/src/device/usbd.h
+++ b/src/device/usbd.h
@@ -50,8 +50,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr);
 
 // Task function should be called in main/rtos loop
 TU_ATTR_ALWAYS_INLINE static inline
-void tud_task (void)
-{
+void tud_task (void) {
   tud_task_ext(UINT32_MAX, false);
 }
 
@@ -80,8 +79,7 @@ bool tud_suspended(void);
 
 // Check if device is ready to transfer
 TU_ATTR_ALWAYS_INLINE static inline
-bool tud_ready(void)
-{
+bool tud_ready(void) {
   return tud_mounted() && !tud_suspended();
 }
 
@@ -148,6 +146,9 @@ TU_ATTR_WEAK void tud_suspend_cb(bool remote_wakeup_en);
 // Invoked when usb bus is resumed
 TU_ATTR_WEAK void tud_resume_cb(void);
 
+// Invoked when there is a new usb event, which need to be processed by tud_task()/tud_task_ext()
+void tud_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr);
+
 // Invoked when received control request with VENDOR TYPE
 TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb_control_request_t const * request);
 
@@ -347,8 +348,8 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 
 /* Standard Interface Association Descriptor (IAD) */
 #define TUD_AUDIO_DESC_IAD_LEN 8
-#define TUD_AUDIO_DESC_IAD(_firstitfs, _nitfs, _stridx) \
-  TUD_AUDIO_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitfs, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx
+#define TUD_AUDIO_DESC_IAD(_firstitf, _nitfs, _stridx) \
+  TUD_AUDIO_DESC_IAD_LEN, TUSB_DESC_INTERFACE_ASSOCIATION, _firstitf, _nitfs, TUSB_CLASS_AUDIO, AUDIO_FUNCTION_SUBCLASS_UNDEFINED, AUDIO_FUNC_PROTOCOL_CODE_V2, _stridx
 
 /* Standard AC Interface Descriptor(4.7.1) */
 #define TUD_AUDIO_DESC_STD_AC_LEN 9
@@ -420,7 +421,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */
 #define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN 7
 #define TUD_AUDIO_DESC_STD_AS_ISO_FB_EP(_ep, _interval) \
-  TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_NO_SYNC | TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(4), _interval
+  TUD_AUDIO_DESC_STD_AS_ISO_FB_EP_LEN, TUSB_DESC_ENDPOINT, _ep, (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_NO_SYNC | TUSB_ISO_EP_ATT_EXPLICIT_FB), U16_TO_U8S_LE(4), _interval
 
 // AUDIO simple descriptor (UAC2) for 1 microphone input
 // - 1 Input Terminal, 1 Feature Unit (Mute and Volume Control), 1 Output Terminal, 1 Clock Source
@@ -443,7 +444,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 
 #define TUD_AUDIO_MIC_ONE_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \
   /* Standard Interface Association Descriptor (IAD) */\
-  TUD_AUDIO_DESC_IAD(/*_firstitfs*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\
+  TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\
   /* Standard AC Interface Descriptor(4.7.1) */\
   TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\
   /* Class-Specific AC Interface Header Descriptor(4.7.2) */\
@@ -467,7 +468,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -492,7 +493,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 
 #define TUD_AUDIO_MIC_FOUR_CH_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epin, _epsize) \
   /* Standard Interface Association Descriptor (IAD) */\
-  TUD_AUDIO_DESC_IAD(/*_firstitfs*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\
+  TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\
   /* Standard AC Interface Descriptor(4.7.1) */\
   TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\
   /* Class-Specific AC Interface Header Descriptor(4.7.2) */\
@@ -516,7 +517,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epin, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000)
 
@@ -540,7 +541,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 
 #define TUD_AUDIO_SPEAKER_MONO_FB_DESCRIPTOR(_itfnum, _stridx, _nBytesPerSample, _nBitsUsedPerSample, _epout, _epsize, _epfb) \
   /* Standard Interface Association Descriptor (IAD) */\
-  TUD_AUDIO_DESC_IAD(/*_firstitfs*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\
+  TUD_AUDIO_DESC_IAD(/*_firstitf*/ _itfnum, /*_nitfs*/ 0x02, /*_stridx*/ 0x00),\
   /* Standard AC Interface Descriptor(4.7.1) */\
   TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ _itfnum, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\
   /* Class-Specific AC Interface Header Descriptor(4.7.2) */\
@@ -564,7 +565,7 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
   /* Type I Format Type Descriptor(2.3.1.6 - Audio Formats) */\
   TUD_AUDIO_DESC_TYPE_I_FORMAT(_nBytesPerSample, _nBitsUsedPerSample),\
   /* Standard AS Isochronous Audio Data Endpoint Descriptor(4.10.1.1) */\
-  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ TUD_OPT_HIGH_SPEED ? 0x04 : 0x01),\
+  TUD_AUDIO_DESC_STD_AS_ISO_EP(/*_ep*/ _epout, /*_attr*/ (uint8_t) (TUSB_XFER_ISOCHRONOUS | TUSB_ISO_EP_ATT_ASYNCHRONOUS | TUSB_ISO_EP_ATT_DATA), /*_maxEPsize*/ _epsize, /*_interval*/ 0x01),\
   /* Class-Specific AS Isochronous Audio Data Endpoint Descriptor(4.10.1.2) */\
   TUD_AUDIO_DESC_CS_AS_ISO_EP(/*_attr*/ AUDIO_CS_AS_ISO_DATA_EP_ATT_NON_MAX_PACKETS_OK, /*_ctrl*/ AUDIO_CTRL_NONE, /*_lockdelayunit*/ AUDIO_CS_AS_ISO_DATA_EP_LOCK_DELAY_UNIT_UNDEFINED, /*_lockdelay*/ 0x0000),\
   /* Standard AS Isochronous Feedback Endpoint Descriptor(4.10.2.1) */\
@@ -773,10 +774,6 @@ TU_ATTR_WEAK bool tud_vendor_control_xfer_cb(uint8_t rhport, uint8_t stage, tusb
 #define TUD_BT_PROTOCOL_PRIMARY_CONTROLLER  0x01
 #define TUD_BT_PROTOCOL_AMP_CONTROLLER      0x02
 
-#ifndef CFG_TUD_BTH_ISO_ALT_COUNT
-#define CFG_TUD_BTH_ISO_ALT_COUNT 0
-#endif
-
 // Length of template descriptor: 38 bytes + number of ISO alternatives * 23
 #define TUD_BTH_DESC_LEN (8 + 9 + 7 + 7 + 7 + (CFG_TUD_BTH_ISO_ALT_COUNT) * (9 + 7 + 7))
 
diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c
index ea8eef285..35cce1f7e 100644
--- a/src/device/usbd_control.c
+++ b/src/device/usbd_control.c
@@ -32,30 +32,38 @@
 #include "tusb.h"
 #include "device/usbd_pvt.h"
 
-#if CFG_TUSB_DEBUG >= 2
+//--------------------------------------------------------------------+
+// Callback weak stubs (called if application does not provide)
+//--------------------------------------------------------------------+
+TU_ATTR_WEAK void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const* request) {
+  (void) rhport;
+  (void) request;
+}
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF
+//--------------------------------------------------------------------+
+
+#if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL
 extern void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback);
 #endif
 
-enum
-{
+enum {
   EDPT_CTRL_OUT = 0x00,
-  EDPT_CTRL_IN  = 0x80
+  EDPT_CTRL_IN = 0x80
 };
 
-typedef struct
-{
+typedef struct {
   tusb_control_request_t request;
-
   uint8_t* buffer;
   uint16_t data_len;
   uint16_t total_xferred;
-
   usbd_control_xfer_cb_t complete_cb;
 } usbd_control_xfer_t;
 
 tu_static usbd_control_xfer_t _ctrl_xfer;
 
-CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN
+CFG_TUD_MEM_SECTION CFG_TUSB_MEM_ALIGN
 tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE];
 
 //--------------------------------------------------------------------+
@@ -63,20 +71,18 @@ tu_static uint8_t _usbd_ctrl_buf[CFG_TUD_ENDPOINT0_SIZE];
 //--------------------------------------------------------------------+
 
 // Queue ZLP status transaction
-static inline bool _status_stage_xact(uint8_t rhport, tusb_control_request_t const * request)
-{
+static inline bool _status_stage_xact(uint8_t rhport, tusb_control_request_t const* request) {
   // Opposite to endpoint in Data Phase
   uint8_t const ep_addr = request->bmRequestType_bit.direction ? EDPT_CTRL_OUT : EDPT_CTRL_IN;
   return usbd_edpt_xfer(rhport, ep_addr, NULL, 0);
 }
 
 // Status phase
-bool tud_control_status(uint8_t rhport, tusb_control_request_t const * request)
-{
-  _ctrl_xfer.request       = (*request);
-  _ctrl_xfer.buffer        = NULL;
+bool tud_control_status(uint8_t rhport, tusb_control_request_t const* request) {
+  _ctrl_xfer.request = (*request);
+  _ctrl_xfer.buffer = NULL;
   _ctrl_xfer.total_xferred = 0;
-  _ctrl_xfer.data_len      = 0;
+  _ctrl_xfer.data_len = 0;
 
   return _status_stage_xact(rhport, request);
 }
@@ -84,16 +90,15 @@ bool tud_control_status(uint8_t rhport, tusb_control_request_t const * request)
 // Queue a transaction in Data Stage
 // Each transaction has up to Endpoint0's max packet size.
 // This function can also transfer an zero-length packet
-static bool _data_stage_xact(uint8_t rhport)
-{
-  uint16_t const xact_len = tu_min16(_ctrl_xfer.data_len - _ctrl_xfer.total_xferred, CFG_TUD_ENDPOINT0_SIZE);
+static bool _data_stage_xact(uint8_t rhport) {
+  uint16_t const xact_len = tu_min16(_ctrl_xfer.data_len - _ctrl_xfer.total_xferred,
+                                     CFG_TUD_ENDPOINT0_SIZE);
 
   uint8_t ep_addr = EDPT_CTRL_OUT;
 
-  if ( _ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN )
-  {
+  if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_IN) {
     ep_addr = EDPT_CTRL_IN;
-    if ( xact_len ) {
+    if (xact_len) {
       TU_VERIFY(0 == tu_memcpy_s(_usbd_ctrl_buf, CFG_TUD_ENDPOINT0_SIZE, _ctrl_xfer.buffer, xact_len));
     }
   }
@@ -103,29 +108,24 @@ static bool _data_stage_xact(uint8_t rhport)
 
 // Transmit data to/from the control endpoint.
 // If the request's wLength is zero, a status packet is sent instead.
-bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const * request, void* buffer, uint16_t len)
-{
-  _ctrl_xfer.request       = (*request);
-  _ctrl_xfer.buffer        = (uint8_t*) buffer;
+bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const* request, void* buffer, uint16_t len) {
+  _ctrl_xfer.request = (*request);
+  _ctrl_xfer.buffer = (uint8_t*) buffer;
   _ctrl_xfer.total_xferred = 0U;
-  _ctrl_xfer.data_len      = tu_min16(len, request->wLength);
+  _ctrl_xfer.data_len = tu_min16(len, request->wLength);
 
-  if (request->wLength > 0U)
-  {
-    if(_ctrl_xfer.data_len > 0U)
-    {
+  if (request->wLength > 0U) {
+    if (_ctrl_xfer.data_len > 0U) {
       TU_ASSERT(buffer);
     }
 
 //    TU_LOG2("  Control total data length is %u bytes\r\n", _ctrl_xfer.data_len);
 
     // Data stage
-    TU_ASSERT( _data_stage_xact(rhport) );
-  }
-  else
-  {
+    TU_ASSERT(_data_stage_xact(rhport));
+  } else {
     // Status stage
-    TU_ASSERT( _status_stage_xact(rhport, request) );
+    TU_ASSERT(_status_stage_xact(rhport, request));
   }
 
   return true;
@@ -134,49 +134,42 @@ bool tud_control_xfer(uint8_t rhport, tusb_control_request_t const * request, vo
 //--------------------------------------------------------------------+
 // USBD API
 //--------------------------------------------------------------------+
-
 void usbd_control_reset(void);
-void usbd_control_set_request(tusb_control_request_t const *request);
-void usbd_control_set_complete_callback( usbd_control_xfer_cb_t fp );
-bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes);
+void usbd_control_set_request(tusb_control_request_t const* request);
+void usbd_control_set_complete_callback(usbd_control_xfer_cb_t fp);
+bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes);
 
-void usbd_control_reset(void)
-{
+void usbd_control_reset(void) {
   tu_varclr(&_ctrl_xfer);
 }
 
 // Set complete callback
-void usbd_control_set_complete_callback( usbd_control_xfer_cb_t fp )
-{
+void usbd_control_set_complete_callback(usbd_control_xfer_cb_t fp) {
   _ctrl_xfer.complete_cb = fp;
 }
 
 // for dcd_set_address where DCD is responsible for status response
-void usbd_control_set_request(tusb_control_request_t const *request)
-{
-  _ctrl_xfer.request       = (*request);
-  _ctrl_xfer.buffer        = NULL;
+void usbd_control_set_request(tusb_control_request_t const* request) {
+  _ctrl_xfer.request = (*request);
+  _ctrl_xfer.buffer = NULL;
   _ctrl_xfer.total_xferred = 0;
-  _ctrl_xfer.data_len      = 0;
+  _ctrl_xfer.data_len = 0;
 }
 
 // callback when a transaction complete on
 // - DATA stage of control endpoint or
 // - Status stage
-bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes)
-{
+bool usbd_control_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) {
   (void) result;
 
   // Endpoint Address is opposite to direction bit, this is Status Stage complete event
-  if ( tu_edpt_dir(ep_addr) != _ctrl_xfer.request.bmRequestType_bit.direction )
-  {
+  if (tu_edpt_dir(ep_addr) != _ctrl_xfer.request.bmRequestType_bit.direction) {
     TU_ASSERT(0 == xferred_bytes);
 
     // invoke optional dcd hook if available
-    if (dcd_edpt0_status_complete) dcd_edpt0_status_complete(rhport, &_ctrl_xfer.request);
+    dcd_edpt0_status_complete(rhport, &_ctrl_xfer.request);
 
-    if (_ctrl_xfer.complete_cb)
-    {
+    if (_ctrl_xfer.complete_cb) {
       // TODO refactor with usbd_driver_print_control_complete_name
       _ctrl_xfer.complete_cb(rhport, CONTROL_STAGE_ACK, &_ctrl_xfer.request);
     }
@@ -184,11 +177,10 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result
     return true;
   }
 
-  if ( _ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_OUT )
-  {
+  if (_ctrl_xfer.request.bmRequestType_bit.direction == TUSB_DIR_OUT) {
     TU_VERIFY(_ctrl_xfer.buffer);
     memcpy(_ctrl_xfer.buffer, _usbd_ctrl_buf, xferred_bytes);
-    TU_LOG_MEM(2, _usbd_ctrl_buf, xferred_bytes, 2);
+    TU_LOG_MEM(CFG_TUD_LOG_LEVEL, _usbd_ctrl_buf, xferred_bytes, 2);
   }
 
   _ctrl_xfer.total_xferred += (uint16_t) xferred_bytes;
@@ -196,37 +188,32 @@ bool usbd_control_xfer_cb (uint8_t rhport, uint8_t ep_addr, xfer_result_t result
 
   // Data Stage is complete when all request's length are transferred or
   // a short packet is sent including zero-length packet.
-  if ( (_ctrl_xfer.request.wLength == _ctrl_xfer.total_xferred) || (xferred_bytes < CFG_TUD_ENDPOINT0_SIZE) )
-  {
+  if ((_ctrl_xfer.request.wLength == _ctrl_xfer.total_xferred) ||
+      (xferred_bytes < CFG_TUD_ENDPOINT0_SIZE)) {
     // DATA stage is complete
     bool is_ok = true;
 
     // invoke complete callback if set
     // callback can still stall control in status phase e.g out data does not make sense
-    if ( _ctrl_xfer.complete_cb )
-    {
-      #if CFG_TUSB_DEBUG >= 2
+    if (_ctrl_xfer.complete_cb) {
+      #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL
       usbd_driver_print_control_complete_name(_ctrl_xfer.complete_cb);
       #endif
 
       is_ok = _ctrl_xfer.complete_cb(rhport, CONTROL_STAGE_DATA, &_ctrl_xfer.request);
     }
 
-    if ( is_ok )
-    {
+    if (is_ok) {
       // Send status
-      TU_ASSERT( _status_stage_xact(rhport, &_ctrl_xfer.request) );
-    }else
-    {
+      TU_ASSERT(_status_stage_xact(rhport, &_ctrl_xfer.request));
+    } else {
       // Stall both IN and OUT control endpoint
       dcd_edpt_stall(rhport, EDPT_CTRL_OUT);
       dcd_edpt_stall(rhport, EDPT_CTRL_IN);
     }
-  }
-  else
-  {
+  } else {
     // More data to transfer
-    TU_ASSERT( _data_stage_xact(rhport) );
+    TU_ASSERT(_data_stage_xact(rhport));
   }
 
   return true;
diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h
index 6fad46db3..9039bc9d6 100644
--- a/src/device/usbd_pvt.h
+++ b/src/device/usbd_pvt.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2019 Ha Thach (tinyusb.org)
@@ -23,8 +23,8 @@
  *
  * This file is part of the TinyUSB stack.
  */
-#ifndef USBD_PVT_H_
-#define USBD_PVT_H_
+#ifndef _TUSB_USBD_PVT_H_
+#define _TUSB_USBD_PVT_H_
 
 #include "osal/osal.h"
 #include "common/tusb_fifo.h"
@@ -33,13 +33,14 @@
  extern "C" {
 #endif
 
+#define TU_LOG_USBD(...)   TU_LOG(CFG_TUD_LOG_LEVEL, __VA_ARGS__)
+
 //--------------------------------------------------------------------+
 // Class Driver API
 //--------------------------------------------------------------------+
 
-typedef struct
-{
-  #if CFG_TUSB_DEBUG >= 2
+typedef struct {
+  #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL
   char const* name;
   #endif
 
@@ -52,7 +53,7 @@ typedef struct
 } usbd_class_driver_t;
 
 // Invoked when initializing device stack to get additional class drivers.
-// Can optionally implemented by application to extend/overwrite class driver support.
+// Can be implemented by application to extend/overwrite class driver support.
 // Note: The drivers array must be accessible at all time when stack is active
 usbd_class_driver_t const* usbd_app_driver_get_cb(uint8_t* driver_count) TU_ATTR_WEAK;
 
@@ -96,10 +97,15 @@ void usbd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr);
 // Check if endpoint is stalled
 bool usbd_edpt_stalled(uint8_t rhport, uint8_t ep_addr);
 
+// Allocate packet buffer used by ISO endpoints
+bool usbd_edpt_iso_alloc(uint8_t rhport, uint8_t ep_addr, uint16_t largest_packet_size);
+
+// Configure and enable an ISO endpoint according to descriptor
+bool usbd_edpt_iso_activate(uint8_t rhport,  tusb_desc_endpoint_t const * p_endpoint_desc);
+
 // Check if endpoint is ready (not busy and not stalled)
 TU_ATTR_ALWAYS_INLINE static inline
-bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr)
-{
+bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) {
   return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr);
 }
 
@@ -111,11 +117,10 @@ void usbd_sof_enable(uint8_t rhport, bool en);
  *------------------------------------------------------------------*/
 
 bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in);
-void usbd_defer_func( osal_task_func_t func, void* param, bool in_isr );
-
+void usbd_defer_func(osal_task_func_t func, void *param, bool in_isr);
 
 #ifdef __cplusplus
  }
 #endif
 
-#endif /* USBD_PVT_H_ */
+#endif