Merge branch 'master' into cr1901-msp430f5529

2 files changed, 353 insertions, 15 deletions

diff --git a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
index 160eefb24..5b2bd83e9 100644
--- a/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
+++ b/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c
@@ -28,9 +28,11 @@
 
 /* Since 2012 starting with LPC11uxx, NXP start to use common USB Device Controller with code name LPC IP3511
  * for almost their new MCUs. Currently supported and tested families are
- * - LPC11Uxx
- * - LPC13xx
- * - LPC51Uxx
+ * - LPC11U68, LPC11U37
+ * - LPC1347
+ * - LPC51U68
+ * - LPC54114
+ * - LPC55s69
  *
  * For similar controller of other families, this file may require some minimal changes to work with.
  * Previous MCUs such as LPC17xx, LPC40xx, LPC18xx, LPC43xx have their own driver implementation.
@@ -38,20 +40,23 @@
 
 #if TUSB_OPT_DEVICE_ENABLED && ( CFG_TUSB_MCU == OPT_MCU_LPC11UXX || \
                                  CFG_TUSB_MCU == OPT_MCU_LPC13XX  || \
+                                 CFG_TUSB_MCU == OPT_MCU_LPC15XX  || \
                                  CFG_TUSB_MCU == OPT_MCU_LPC51UXX || \
                                  CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \
                                  CFG_TUSB_MCU == OPT_MCU_LPC55XX)
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX || CFG_TUSB_MCU == OPT_MCU_LPC13XX
-  // LPC11Uxx and LPC13xx use lpcopen
+#if CFG_TUSB_MCU == OPT_MCU_LPC11UXX || CFG_TUSB_MCU == OPT_MCU_LPC13XX || CFG_TUSB_MCU == OPT_MCU_LPC15XX
+  // LPC 11Uxx, 13xx, 15xx use lpcopen
   #include "chip.h"
   #define DCD_REGS        LPC_USB
   #define DCD_IRQHandler  USB_IRQHandler
+
 #elif CFG_TUSB_MCU == OPT_MCU_LPC51UXX || CFG_TUSB_MCU == OPT_MCU_LPC54XXX || \
       CFG_TUSB_MCU == OPT_MCU_LPC55XX // TODO 55xx has dual usb controllers
   #include "fsl_device_registers.h"
   #define DCD_REGS        USB0
   #define DCD_IRQHandler  USB0_IRQHandler
+
 #endif
 
 #include "device/dcd.h"
@@ -61,6 +66,9 @@
 //--------------------------------------------------------------------+
 
 // Number of endpoints
+// - 11 13 15 51 54 has 5x2 endpoints
+// - 18/43 usb0 & 55s usb1 (HS) has 6x2 endpoints
+// - 18/43 usb1 & 55s usb0 (FS) has 4x2 endpoints
 #define EP_COUNT 10
 
 // only SRAM1 & USB RAM can be used for transfer.
@@ -166,7 +174,7 @@ void dcd_init(uint8_t rhport)
   DCD_REGS->INTSTAT      = DCD_REGS->INTSTAT; // clear all pending interrupt
   DCD_REGS->INTEN        = INT_DEVICE_STATUS_MASK;
   DCD_REGS->DEVCMDSTAT  |= CMDSTAT_DEVICE_ENABLE_MASK | CMDSTAT_DEVICE_CONNECT_MASK |
-                          CMDSTAT_RESET_CHANGE_MASK | CMDSTAT_CONNECT_CHANGE_MASK | CMDSTAT_SUSPEND_CHANGE_MASK;
+                           CMDSTAT_RESET_CHANGE_MASK | CMDSTAT_CONNECT_CHANGE_MASK | CMDSTAT_SUSPEND_CHANGE_MASK;
 
   NVIC_ClearPendingIRQ(USB0_IRQn);
 }
@@ -270,7 +278,7 @@ bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t to
 
   prepare_ep_xfer(ep_id, get_buf_offset(buffer), total_bytes);
 
-	return true;
+  return true;
 }
 
 //--------------------------------------------------------------------+
@@ -329,7 +337,7 @@ static void process_xfer_isr(uint32_t int_status)
 
 void DCD_IRQHandler(void)
 {
-  uint32_t const dev_cmd_stat = DCD_REGS->DEVCMDSTAT;
+  uint32_t const cmd_stat = DCD_REGS->DEVCMDSTAT;
 
   uint32_t int_status = DCD_REGS->INTSTAT & DCD_REGS->INTEN;
   DCD_REGS->INTSTAT = int_status; // Acknowledge handled interrupt
@@ -340,16 +348,16 @@ void DCD_IRQHandler(void)
   if ( int_status & INT_DEVICE_STATUS_MASK )
   {
     DCD_REGS->DEVCMDSTAT |= CMDSTAT_RESET_CHANGE_MASK | CMDSTAT_CONNECT_CHANGE_MASK | CMDSTAT_SUSPEND_CHANGE_MASK;
-    if ( dev_cmd_stat & CMDSTAT_RESET_CHANGE_MASK) // bus reset
+    if ( cmd_stat & CMDSTAT_RESET_CHANGE_MASK) // bus reset
     {
       bus_reset();
       dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
     }
 
-    if (dev_cmd_stat & CMDSTAT_CONNECT_CHANGE_MASK)
+    if (cmd_stat & CMDSTAT_CONNECT_CHANGE_MASK)
     {
       // device disconnect
-      if (dev_cmd_stat & CMDSTAT_DEVICE_ADDR_MASK)
+      if (cmd_stat & CMDSTAT_DEVICE_ADDR_MASK)
       {
         // debouncing as this can be set when device is powering
         dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, true);
@@ -357,12 +365,12 @@ void DCD_IRQHandler(void)
     }
 
     // TODO support suspend & resume
-    if (dev_cmd_stat & CMDSTAT_SUSPEND_CHANGE_MASK)
+    if (cmd_stat & CMDSTAT_SUSPEND_CHANGE_MASK)
     {
-      if (dev_cmd_stat & CMDSTAT_DEVICE_SUSPEND_MASK)
+      if (cmd_stat & CMDSTAT_DEVICE_SUSPEND_MASK)
       { // suspend signal, bus idle for more than 3ms
         // Note: Host may delay more than 3 ms before and/or after bus reset before doing enumeration.
-        if (dev_cmd_stat & CMDSTAT_DEVICE_ADDR_MASK)
+        if (cmd_stat & CMDSTAT_DEVICE_ADDR_MASK)
         {
           dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true);
         }
@@ -376,7 +384,7 @@ void DCD_IRQHandler(void)
   }
 
   // Setup Receive
-  if ( tu_bit_test(int_status, 0) && (dev_cmd_stat & CMDSTAT_SETUP_RECEIVED_MASK) )
+  if ( tu_bit_test(int_status, 0) && (cmd_stat & CMDSTAT_SETUP_RECEIVED_MASK) )
   {
     // Follow UM flowchart to clear Active & Stall on both Control IN/OUT endpoints
     _dcd.ep[0][0].active = _dcd.ep[1][0].active = 0;
diff --git a/src/portable/sony/cxd56/dcd_cxd56.c b/src/portable/sony/cxd56/dcd_cxd56.c
new file mode 100644
index 000000000..638b2f979
--- /dev/null
+++ b/src/portable/sony/cxd56/dcd_cxd56.c
@@ -0,0 +1,330 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright 2019 Sony Semiconductor Solutions Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if TUSB_OPT_DEVICE_ENABLED && CFG_TUSB_MCU == OPT_MCU_CXD56
+
+#include <errno.h>
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/arch.h>
+
+#include "device/dcd.h"
+
+#define CXD56_EPNUM (7)
+
+struct usbdcd_driver_s
+{
+  struct usbdevclass_driver_s usbdevclass_driver;
+  FAR struct usbdev_ep_s *ep[CXD56_EPNUM];
+  FAR struct usbdev_req_s *req[CXD56_EPNUM];
+};
+
+static struct usbdcd_driver_s usbdcd_driver;
+static struct usbdev_s *usbdev;
+
+static int dcd_bind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev);
+static void dcd_unbind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev);
+static int dcd_setup(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev,
+                     FAR const struct usb_ctrlreq_s *ctrl, FAR uint8_t *dataout, size_t outlen);
+static void dcd_disconnect(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev);
+static void dcd_suspend(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev);
+static void dcd_resume(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev);
+
+static const struct usbdevclass_driverops_s g_driverops =
+{
+  dcd_bind,       /* bind */
+  dcd_unbind,     /* unbind */
+  dcd_setup,      /* setup */
+  dcd_disconnect, /* disconnect */
+  dcd_suspend,    /* suspend */
+  dcd_resume,     /* resume */
+};
+
+static void usbdcd_ep0incomplete(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req)
+{
+  (void) ep;
+
+  uint8_t ep_addr = (uint32_t)req->priv;
+
+  if (req->result || req->xfrd != req->len)
+  {
+    if (req->len)
+    {
+      dcd_event_xfer_complete(0, ep_addr, req->xfrd, XFER_RESULT_SUCCESS, true);
+    }
+  }
+  else
+  {
+    if (req->xfrd)
+    {
+      dcd_event_xfer_complete(0, ep_addr, req->xfrd, XFER_RESULT_SUCCESS, true);
+    }
+  }
+}
+
+static int dcd_bind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev)
+{
+  (void) driver;
+
+  usbdev = dev;
+  usbdcd_driver.ep[0] = dev->ep0;
+
+  usbdcd_driver.req[0] = EP_ALLOCREQ(usbdcd_driver.ep[0]);
+  if (usbdcd_driver.req[0] != NULL)
+  {
+    usbdcd_driver.req[0]->len = 64;
+    usbdcd_driver.req[0]->buf = EP_ALLOCBUFFER(usbdcd_driver.ep[0], 64);
+    if (!usbdcd_driver.req[0]->buf)
+    {
+      EP_FREEREQ(usbdcd_driver.ep[0], usbdcd_driver.req[0]);
+      usbdcd_driver.req[0] = NULL;
+    }
+  }
+
+  usbdcd_driver.req[0]->callback = usbdcd_ep0incomplete;
+
+  DEV_CONNECT(dev);
+  return 0;
+}
+
+static void dcd_unbind(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev)
+{
+  (void) driver;
+  (void) dev;
+}
+
+static int dcd_setup(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev,
+                     FAR const struct usb_ctrlreq_s *ctrl, FAR uint8_t *dataout, size_t outlen)
+{
+  (void) driver;
+  (void) dev;
+  (void) dataout;
+  (void) outlen;
+
+  dcd_event_setup_received(0, (uint8_t *)ctrl, true);
+
+  return 0;
+}
+
+static void dcd_disconnect(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev)
+{
+  (void) driver;
+
+  dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+  DEV_CONNECT(dev);
+}
+
+static void dcd_suspend(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev)
+{
+  (void) driver;
+  (void) dev;
+
+  dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true);
+}
+
+static void dcd_resume(FAR struct usbdevclass_driver_s *driver, FAR struct usbdev_s *dev)
+{
+  (void) driver;
+  (void) dev;
+
+  dcd_event_bus_signal(0, DCD_EVENT_RESUME, true);
+}
+
+void dcd_init(uint8_t rhport)
+{
+  (void) rhport;
+
+  usbdcd_driver.usbdevclass_driver.speed = USB_SPEED_HIGH;
+  usbdcd_driver.usbdevclass_driver.ops = &g_driverops;
+
+  usbdev_register(&usbdcd_driver.usbdevclass_driver);
+}
+
+// Enable device interrupt
+void dcd_int_enable(uint8_t rhport)
+{
+  (void) rhport;
+
+  up_enable_irq(CXD56_IRQ_USB_INT);
+}
+
+// Disable device interrupt
+void dcd_int_disable(uint8_t rhport)
+{
+  (void) rhport;
+
+  up_disable_irq(CXD56_IRQ_USB_INT);
+}
+
+// Receive Set Address request, mcu port must also include status IN response
+void dcd_set_address(uint8_t rhport, uint8_t dev_addr)
+{
+  (void) rhport;
+  (void) dev_addr;
+}
+
+// Receive Set Config request
+void dcd_set_config(uint8_t rhport, uint8_t config_num)
+{
+  (void) rhport;
+  (void) config_num;
+}
+
+void dcd_remote_wakeup(uint8_t rhport)
+{
+  (void) rhport;
+  
+  DEV_WAKEUP(usbdev);
+}
+
+//--------------------------------------------------------------------+
+// Endpoint API
+//--------------------------------------------------------------------+
+
+bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *p_endpoint_desc)
+{
+  (void) rhport;
+
+  uint8_t epnum = tu_edpt_number(p_endpoint_desc->bEndpointAddress);
+  uint8_t const dir = tu_edpt_dir(p_endpoint_desc->bEndpointAddress);
+  uint8_t xfrtype = 0;
+  struct usb_epdesc_s epdesc;
+
+  if (epnum >= CXD56_EPNUM)
+  {
+    return false;
+  }
+
+  switch (p_endpoint_desc->bmAttributes.xfer)
+  {
+  case 1:
+    xfrtype = USB_EP_ATTR_XFER_ISOC;
+    break;
+  case 2:
+    xfrtype = USB_EP_ATTR_XFER_BULK;
+    break;
+  case 3:
+    xfrtype = USB_EP_ATTR_XFER_INT;
+    break;
+  }
+
+  usbdcd_driver.ep[epnum] = DEV_ALLOCEP(usbdev, epnum, dir == TUSB_DIR_IN, xfrtype);
+  if (usbdcd_driver.ep[epnum] == NULL)
+  {
+    return false;
+  }
+
+  usbdcd_driver.req[epnum] = NULL;
+  usbdcd_driver.req[epnum] = EP_ALLOCREQ(usbdcd_driver.ep[epnum]);
+  if (usbdcd_driver.req[epnum] != NULL)
+  {
+    usbdcd_driver.req[epnum]->len = p_endpoint_desc->wMaxPacketSize.size;
+  }
+  else
+  {
+    return false;
+  }
+
+  usbdcd_driver.req[epnum]->callback = usbdcd_ep0incomplete;
+
+  epdesc.len = p_endpoint_desc->bLength;
+  epdesc.type = p_endpoint_desc->bDescriptorType;
+  epdesc.addr = p_endpoint_desc->bEndpointAddress;
+  epdesc.attr = xfrtype;
+  epdesc.mxpacketsize[0] = LSBYTE(p_endpoint_desc->wMaxPacketSize.size);
+  epdesc.mxpacketsize[1] = MSBYTE(p_endpoint_desc->wMaxPacketSize.size);
+  epdesc.interval = p_endpoint_desc->bInterval;
+
+  if (EP_CONFIGURE(usbdcd_driver.ep[epnum], &epdesc, false) < 0)
+  {
+    return false;
+  }
+
+  return true;
+}
+
+bool dcd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t *buffer, uint16_t total_bytes)
+{
+  (void) rhport;
+
+  uint8_t epnum = tu_edpt_number(ep_addr);
+
+  if (epnum >= CXD56_EPNUM)
+  {
+    return false;
+  }
+
+  usbdcd_driver.req[epnum]->len = total_bytes;
+  usbdcd_driver.req[epnum]->priv = (void *)((uint32_t)ep_addr);
+  usbdcd_driver.req[epnum]->flags = 0;
+
+  if (total_bytes)
+  {
+    usbdcd_driver.req[epnum]->buf = buffer;
+  }
+  else
+  {
+    return true;
+  }
+
+  if (EP_SUBMIT(usbdcd_driver.ep[epnum], usbdcd_driver.req[epnum]) < 0)
+  {
+    return false;
+  }
+
+  return true;
+}
+
+void dcd_edpt_stall(uint8_t rhport, uint8_t ep_addr)
+{
+  (void) rhport;
+
+  uint8_t epnum = tu_edpt_number(ep_addr);
+
+  if (epnum >= CXD56_EPNUM)
+  {
+    return;
+  }
+
+  EP_STALL(usbdcd_driver.ep[epnum]);
+}
+
+void dcd_edpt_clear_stall(uint8_t rhport, uint8_t ep_addr)
+{
+  (void) rhport;
+  
+  uint8_t epnum = tu_edpt_number(ep_addr);
+
+  if (epnum >= CXD56_EPNUM)
+  {
+    return;
+  }
+
+  EP_RESUME(usbdcd_driver.ep[epnum]);
+}
+
+#endif