revert name to dcd_int_handler due to function prototype warning

1 files changed, 10 insertions, 10 deletions

diff --git a/src/portable/espressif/esp32s2/dcd_esp32s2.c b/src/portable/espressif/esp32s2/dcd_esp32s2.c
index d34e1c123..328ec2fb9 100644
--- a/src/portable/espressif/esp32s2/dcd_esp32s2.c
+++ b/src/portable/espressif/esp32s2/dcd_esp32s2.c
@@ -123,7 +123,7 @@ static void bus_reset(void)
 
 static void enum_done_processing(void)
 {
-  ESP_EARLY_LOGV(TAG, "dcd_irq_handler - Speed enumeration done! Sending DCD_EVENT_BUS_RESET then");
+  ESP_EARLY_LOGV(TAG, "dcd_int_handler - Speed enumeration done! Sending DCD_EVENT_BUS_RESET then");
   // On current silicon on the Full Speed core, speed is fixed to Full Speed.
   // However, keep for debugging and in case Low Speed is ever supported.
   uint32_t enum_spd = (USB0.dsts >> USB_ENUMSPD_S) & (USB_ENUMSPD_V);
@@ -648,28 +648,28 @@ static void handle_epin_ints(void)
 }
 
 
-void dcd_irq_handler(uint32_t rhport)
+static void dcd_int_handler(void* arg)
 {
-  (void) rhport;
+  (void) arg;
 
   const uint32_t int_status = USB0.gintsts;
   //const uint32_t int_msk = USB0.gintmsk;
 
   if (int_status & USB_DISCONNINT_M) {
-    ESP_EARLY_LOGV(TAG, "dcd_irq_handler - disconnected");
+    ESP_EARLY_LOGV(TAG, "dcd_int_handler - disconnected");
     USB0.gintsts = USB_DISCONNINT_M;
     dcd_event_bus_signal(0, DCD_EVENT_UNPLUGGED, true);
   }
 
   if (int_status & USB_USBRST_M) {
     // start of reset
-    ESP_EARLY_LOGV(TAG, "dcd_irq_handler - reset");
+    ESP_EARLY_LOGV(TAG, "dcd_int_handler - reset");
     USB0.gintsts = USB_USBRST_M;
     bus_reset();
   }
 
   if (int_status & USB_RESETDET_M) {
-    ESP_EARLY_LOGV(TAG, "dcd_irq_handler - reset while suspend");
+    ESP_EARLY_LOGV(TAG, "dcd_int_handler - reset while suspend");
     USB0.gintsts = USB_RESETDET_M;
     bus_reset();
   }
@@ -691,7 +691,7 @@ void dcd_irq_handler(uint32_t rhport)
 #endif
 
   if (int_status & USB_RXFLVI_M) {
-    ESP_EARLY_LOGV(TAG, "dcd_irq_handler - rx!");
+    ESP_EARLY_LOGV(TAG, "dcd_int_handler - rx!");
     USB0.gintsts = USB_RXFLVI_M;
 
     // disable RXFLVI interrupt until we read data from FIFO
@@ -705,13 +705,13 @@ void dcd_irq_handler(uint32_t rhport)
 
   // OUT endpoint interrupt handling.
   if (int_status & USB_OEPINT_M) {
-    ESP_EARLY_LOGV(TAG, "dcd_irq_handler - OUT endpoint!");
+    ESP_EARLY_LOGV(TAG, "dcd_int_handler - OUT endpoint!");
     handle_epout_ints();
   }
 
   // IN endpoint interrupt handling.
   if (int_status & USB_IEPINT_M) {
-    ESP_EARLY_LOGV(TAG, "dcd_irq_handler - IN endpoint!");
+    ESP_EARLY_LOGV(TAG, "dcd_int_handler - IN endpoint!");
     handle_epin_ints();
   }
 
@@ -736,7 +736,7 @@ void dcd_irq_handler(uint32_t rhport)
 void dcd_int_enable (uint8_t rhport)
 {
   (void) rhport;
-  esp_intr_alloc(ETS_USB_INTR_SOURCE, ESP_INTR_FLAG_LOWMED, (intr_handler_t) dcd_irq_handler, NULL, &usb_ih);
+  esp_intr_alloc(ETS_USB_INTR_SOURCE, ESP_INTR_FLAG_LOWMED, (intr_handler_t) dcd_int_handler, NULL, &usb_ih);
 }
 
 void dcd_int_disable (uint8_t rhport)