ground works for hcd max3421e

1 files changed, 302 insertions, 0 deletions

diff --git a/src/portable/analog/max3421e/hcd_max3421e.c b/src/portable/analog/max3421e/hcd_max3421e.c
new file mode 100644
index 000000000..7b9d73e4e
--- /dev/null
+++ b/src/portable/analog/max3421e/hcd_max3421e.c
@@ -0,0 +1,302 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421E) && CFG_TUH_MAX3421E
+
+#include "host/hcd.h"
+
+//--------------------------------------------------------------------+
+//
+//--------------------------------------------------------------------+
+
+// Command format is
+// Reg [7:3] | 0 [2] | Dir [1] | Ack [0]
+
+enum {
+  CMDBYTE_WRITE = 0x02,
+};
+
+enum {
+  RCVVFIFO_ADDR = 1u  << 3, // 0x08
+  SNDFIFO_ADDR  = 2u  << 3, // 0x10
+  SUDFIFO_ADDR  = 4u  << 3, // 0x20
+  RCVBC_ADDR    = 6u  << 3, // 0x30
+  SNDBC_ADDR    = 7u  << 3, // 0x38
+  USBIRQ_ADDR   = 13u << 3, // 0x68
+  USBIEN_ADDR   = 14u << 3, // 0x70
+  USBCTL_ADDR   = 15u << 3, // 0x78
+  CPUCTL_ADDR   = 16u << 3, // 0x80
+  PINCTL_ADDR   = 17u << 3, // 0x88
+  REVISION_ADDR = 18u << 3, // 0x90
+  HIRQ_ADDR     = 25u << 3, // 0xC8
+  HIEN_ADDR     = 26u << 3, // 0xD0
+  MODE_ADDR     = 27u << 3, // 0xD8
+  PERADDR_ADDR  = 28u << 3, // 0xE0
+  HCTL_ADDR     = 29u << 3, // 0xE8
+  HXFR_ADDR     = 30u << 3, // 0xF0
+  HRSL_ADDR     = 31u << 3, // 0xF8
+};
+
+enum {
+  USBIRQ_OSCOK_IRQ  = 1u << 0,
+  USBIRQ_NOVBUS_IRQ = 1u << 5,
+  USBIRQ_VBUS_IRQ   = 1u << 6,
+};
+
+enum {
+  USBCTL_PWRDOWN = 1u << 4,
+  USBCTL_CHIPRES = 1u << 5,
+};
+
+enum {
+  CPUCTL_IE        = 1u << 0,
+  CPUCTL_PULSEWID0 = 1u << 6,
+  CPUCTL_PULSEWID1 = 1u << 7,
+};
+
+enum {
+  PINCTL_GPXA     = 1u << 0,
+  PINCTL_GPXB     = 1u << 1,
+  PINCTL_POSINT   = 1u << 2,
+  PINCTL_INTLEVEL = 1u << 3,
+  PINCTL_FDUPSPI  = 1u << 4,
+};
+
+enum {
+  HIRQ_BUSEVENT_IRQ = 1u << 0,
+  HIRQ_RWU_IRQ      = 1u << 1,
+  HIRQ_RCVDAV_IRQ   = 1u << 2,
+  HIRQ_SNDBAV_IRQ   = 1u << 3,
+  HIRQ_SUSDN_IRQ    = 1u << 4,
+  HIRQ_CONDET_IRQ   = 1u << 5,
+  HIRQ_FRAME_IRQ    = 1u << 6,
+  HIRQ_HXFRDN_IRQ   = 1u << 7,
+};
+
+enum {
+  MODE_HOST      = 1u << 0,
+  MODE_LOWSPEED  = 1u << 1,
+  MODE_HUBPRE    = 1u << 2,
+  MODE_SOFKAENAB = 1u << 3,
+  MODE_SEPIRQ    = 1u << 4,
+  MODE_DELAYISO  = 1u << 5,
+  MODE_DMPULLDN  = 1u << 6,
+  MODE_DPPULLDN  = 1u << 7,
+};
+
+enum {
+  HCTL_BUSRST    = 1u << 1,
+  HCTL_FRMRST    = 1u << 2,
+  HCTL_SAMPLEBUS = 1u << 3,
+  HCTL_SIGRSM    = 1u << 4,
+  HCTL_RCVTOG0   = 1u << 5,
+  HCTL_RCVTOG1   = 1u << 6,
+  HCTL_SNDTOG0   = 1u << 7,
+  HCTL_SNDTOG1   = 1u << 8,
+};
+
+enum {
+  HXFR_EPNUM_MASK = 0x0f,
+  HXFR_SETUP      = 1u << 4,
+  HXFR_OUT_NIN    = 1u << 5,
+  HXFR_ISO        = 1u << 6,
+  HXFR_HS         = 1u << 7,
+};
+
+enum {
+  HRSL_RESULT_MASK = 0x0f,
+  HRSL_RCVTOGRD    = 1u << 4,
+  HRSL_SNDTOGRD    = 1u << 5,
+  HRSL_KSTATUS     = 1u << 6,
+  HRSL_JSTATUS     = 1u << 7,
+};
+
+// API: SPI transfer with MAX3421E, must be implemented by application
+bool tuh_max3421e_spi_xfer_api(uint8_t rhport, uint8_t const * tx_buf, size_t tx_len, uint8_t * rx_buf, size_t rx_len);
+
+// return HIRQ register since we are in full-duplex mode
+static uint8_t reg_write(uint8_t reg, uint8_t data) {
+  uint8_t tx_buf[2] = {reg | CMDBYTE_WRITE, data};
+  uint8_t rx_buf[2] = {0, 0};
+  tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2);
+  return rx_buf[0];
+}
+
+static uint8_t reg_read(uint8_t reg) {
+  uint8_t tx_buf[2] = {reg, 0};
+  uint8_t rx_buf[2] = {0, 0};
+  return tuh_max3421e_spi_xfer_api(0, tx_buf, 2, rx_buf, 2) ? rx_buf[1] : 0;
+}
+
+
+//--------------------------------------------------------------------+
+// Controller API
+//--------------------------------------------------------------------+
+
+// optional hcd configuration, called by tuh_configure()
+bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) {
+  (void) rhport;
+  (void) cfg_id;
+  (void) cfg_param;
+
+  return false;
+}
+
+// Initialize controller to host mode
+bool hcd_init(uint8_t rhport) {
+  (void) rhport;
+
+  // full duplex, interrupt level (should be configurable)
+  reg_write(PINCTL_ADDR, PINCTL_FDUPSPI | PINCTL_INTLEVEL);
+
+  // reset
+  reg_write(USBCTL_ADDR, USBCTL_CHIPRES);
+  reg_write(USBCTL_ADDR, 0);
+  while( !(reg_read(USBIRQ_ADDR) & USBIRQ_OSCOK_IRQ) ) {
+    // wait for oscillator to stabilize
+  }
+
+  // Mode: Host and DP/DM pull down
+  reg_write(MODE_ADDR, MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST);
+
+  // Connection detection
+  reg_write(HIEN_ADDR, HIRQ_CONDET_IRQ /*| HIRQ_FRAME_IRQ */);
+
+  return false;
+}
+
+// Interrupt Handler
+void hcd_int_handler(uint8_t rhport) {
+  (void) rhport;
+}
+
+// Enable USB interrupt
+void hcd_int_enable (uint8_t rhport) {
+  (void) rhport;
+}
+
+// Disable USB interrupt
+void hcd_int_disable(uint8_t rhport) {
+  (void) rhport;
+}
+
+// Get frame number (1ms)
+uint32_t hcd_frame_number(uint8_t rhport) {
+  (void) rhport;
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Port API
+//--------------------------------------------------------------------+
+
+// Get the current connect status of roothub port
+bool hcd_port_connect_status(uint8_t rhport) {
+  (void) rhport;
+
+  return false;
+}
+
+// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete.
+// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence.
+void hcd_port_reset(uint8_t rhport) {
+  (void) rhport;
+}
+
+// Complete bus reset sequence, may be required by some controllers
+void hcd_port_reset_end(uint8_t rhport) {
+  (void) rhport;
+}
+
+// Get port link speed
+tusb_speed_t hcd_port_speed_get(uint8_t rhport) {
+  (void) rhport;
+
+  return TUSB_SPEED_FULL;
+}
+
+// HCD closes all opened endpoints belong to this device
+void hcd_device_close(uint8_t rhport, uint8_t dev_addr) {
+  (void) rhport;
+  (void) dev_addr;
+}
+
+//--------------------------------------------------------------------+
+// Endpoints API
+//--------------------------------------------------------------------+
+
+// Open an endpoint
+bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_desc;
+
+  return false;
+}
+
+// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked
+bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_addr;
+  (void) buffer;
+  (void) buflen;
+
+  return false;
+}
+
+// Abort a queued transfer. Note: it can only abort transfer that has not been started
+// Return true if a queued transfer is aborted, false if there is no transfer to abort
+bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_addr;
+
+  return false;
+}
+
+// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked
+bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) setup_packet;
+
+  return false;
+}
+
+// clear stall, data toggle is also reset to DATA0
+bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_addr;
+
+  return false;
+}
+
+#endif