move class files

1 files changed, 0 insertions, 132 deletions

diff --git a/tinyusb/class/cdc_device.h b/tinyusb/class/cdc_device.h
deleted file mode 100644
index 1f738aa7f..000000000
--- a/tinyusb/class/cdc_device.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/**************************************************************************/

-/*!

-    @file     cdc_device.h

-    @author   hathach (tinyusb.org)

-

-    @section LICENSE

-

-    Software License Agreement (BSD License)

-

-    Copyright (c) 2013, hathach (tinyusb.org)

-    All rights reserved.

-

-    Redistribution and use in source and binary forms, with or without

-    modification, are permitted provided that the following conditions are met:

-    1. Redistributions of source code must retain the above copyright

-    notice, this list of conditions and the following disclaimer.

-    2. Redistributions in binary form must reproduce the above copyright

-    notice, this list of conditions and the following disclaimer in the

-    documentation and/or other materials provided with the distribution.

-    3. Neither the name of the copyright holders nor the

-    names of its contributors may be used to endorse or promote products

-    derived from this software without specific prior written permission.

-

-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY

-    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY

-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

-    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-

-    This file is part of the tinyusb stack.

-*/

-/**************************************************************************/

-

-#ifndef _TUSB_CDC_DEVICE_H_

-#define _TUSB_CDC_DEVICE_H_

-

-#include "common/common.h"

-#include "device/usbd.h"

-#include "cdc.h"

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/** \addtogroup CDC_Serial Serial

- *  @{

- *  \defgroup   CDC_Serial_Device Device

- *  @{ */

-

-//--------------------------------------------------------------------+

-// APPLICATION API

-//--------------------------------------------------------------------+

-/** \brief      Check if the interface is currently busy or not

- * \param[in]   coreid USB Controller ID

- * \retval      true if the interface is busy meaning the stack is still transferring/waiting data from/to host

- * \retval      false if the interface is not busy meaning the stack successfully transferred data from/to host

- * \note        This function is primarily used for polling/waiting result after \ref tusbd_hid_keyboard_send.

- */

-bool tud_cdc_busy(uint8_t coreid, cdc_pipeid_t pipeid)  ATTR_PURE ATTR_WARN_UNUSED_RESULT;

-

-/** \brief        Submit USB transfer

- * \param[in]		  coreid USB Controller ID

- * \param[in]     p_data  buffer containing data from application. Must be accessible by USB controller (see \ref TUSB_CFG_ATTR_USBRAM)

- * \param[in]     length number of bytes in \a p_data.

- * \param[in]     is_notify indicates whether the hardware completion (data transferred through USB bus) will be notified

- *                to Application (via \ref tusbd_cdc_xfer_cb)

- * \returns       \ref tusb_error_t type to indicate success or error condition.

- * \retval        TUSB_ERROR_NONE on success

- * \retval        TUSB_ERROR_INTERFACE_IS_BUSY if the interface is busy transferring previous data.

- * \retval        TUSB_ERROR_DEVICE_NOT_READY if device is not yet configured (by SET CONFIGURED request)

- * \retval        TUSB_ERROR_INVALID_PARA if input parameters are not correct

- * \note          This function is non-blocking and returns immediately. Data will be transferred when USB Host work with this interface.

- *                The result of usb transfer will be reported by the interface's callback function if \a is_notify is true

- */

-tusb_error_t tud_cdc_send(uint8_t coreid, void * p_data, uint32_t length, bool is_notify);

-

-/** \brief        Submit USB transfer

- * \param[in]		  coreid USB Controller ID

- * \param[in]     p_buffer  application's buffer to receive data. Must be accessible by USB controller (see \ref TUSB_CFG_ATTR_USBRAM)

- * \param[in]     length number of bytes in \a p_buffer.

- * \param[in]     is_notify indicates whether the hardware completion (data transferred through USB bus) will be notified

- *                to Application (via \ref tusbd_cdc_xfer_cb)

- * \returns       \ref tusb_error_t type to indicate success or error condition.

- * \retval        TUSB_ERROR_NONE on success

- * \retval        TUSB_ERROR_INTERFACE_IS_BUSY if the interface is busy transferring previous data.

- * \retval        TUSB_ERROR_DEVICE_NOT_READY if device is not yet configured (by SET CONFIGURED request)

- * \retval        TUSB_ERROR_INVALID_PARA if input parameters are not correct

- * \note          This function is non-blocking and returns immediately. Data will be transferred when USB Host work with this interface.

- *                The result of usb transfer will be reported by the interface's callback function if \a is_notify is true

- */

-tusb_error_t tud_cdc_receive(uint8_t coreid, void * p_buffer, uint32_t length, bool is_notify);

-

-//--------------------------------------------------------------------+

-// APPLICATION CALLBACK API

-//--------------------------------------------------------------------+

-/** \brief      Callback function that is invoked when an completion (error or success) of an USB transfer previously submitted

- *              by application (e.g \ref tusbd_cdc_send or \ref tusbd_cdc_send) with \a is_notify set to true.

- * \param[in]		coreid	USB Controller ID

- * \param[in]   event an value from \ref tusb_event_t

- * \param[in]   pipe_id indicates which pipe of this interface the event occured.

- * \param[in]   xferred_bytes is actual number of bytes transferred via USB bus. This value in general can be different to

- *              the one that previously submitted by application.

- */

-void tud_cdc_xfer_cb(uint8_t coreid, tusb_event_t event, cdc_pipeid_t pipe_id, uint32_t xferred_bytes);

-//void tud_cdc_line_coding_changed_cb(uint8_t coreid, cdc_line_coding_t* p_line_coding);

-

-//--------------------------------------------------------------------+

-// USBD-CLASS DRIVER API

-//--------------------------------------------------------------------+

-#ifdef _TINY_USB_SOURCE_FILE_

-

-void cdcd_init(void);

-tusb_error_t cdcd_open(uint8_t coreid, tusb_descriptor_interface_t const * p_interface_desc, uint16_t *p_length);

-tusb_error_t cdcd_control_request_subtask(uint8_t coreid, tusb_control_request_t const * p_request);

-tusb_error_t cdcd_xfer_cb(endpoint_handle_t edpt_hdl, tusb_event_t event, uint32_t xferred_bytes);

-void cdcd_close(uint8_t coreid);

-

-#endif

-

-#ifdef __cplusplus

- }

-#endif

-

-#endif /* _TUSB_CDC_DEVICE_H_ */

-

-/** @} */

-/** @} */