rename coreid to port

1 files changed, 9 insertions, 9 deletions

diff --git a/tinyusb/class/msc/msc_device.h b/tinyusb/class/msc/msc_device.h
index c8cc29db8..0fde78a47 100644
--- a/tinyusb/class/msc/msc_device.h
+++ b/tinyusb/class/msc/msc_device.h
@@ -61,7 +61,7 @@
 //--------------------------------------------------------------------+

 

 /** \brief 			Callback that is invoked when tinyusb stack received \ref SCSI_CMD_READ_10 command from host

- * \param[in]		coreid	    USB Controller ID

+ * \param[in]		port	    USB Controller ID

  * \param[in]		lun         Targeted Logical Unit

  * \param[out]	pp_buffer   Pointer to buffer which application need to update with the response data's address.

  *                          Must be accessible by USB controller (see \ref TUSB_CFG_ATTR_USBRAM)

@@ -76,10 +76,10 @@
  *              \n\n Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

  *              the same task (to save resource), any delay in this callback will cause delay in reponse on other classes.

  */

-uint16_t tud_msc_read10_cb (uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count);

+uint16_t tud_msc_read10_cb (uint8_t port, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count);

 

 /** \brief 			Callback that is invoked when tinyusb stack received \ref SCSI_CMD_WRITE_10 command from host

- * \param[in]		coreid	    USB Controller ID

+ * \param[in]		port	    USB Controller ID

  * \param[in]		lun         Targeted Logical Unit

  * \param[out]	pp_buffer   Pointer to buffer which application need to update with the address to hold data from host

  *                          Must be accessible by USB controller (see \ref TUSB_CFG_ATTR_USBRAM)

@@ -94,12 +94,12 @@ uint16_t tud_msc_read10_cb (uint8_t coreid, uint8_t lun, void** pp_buffer, uint3
  *              \n\n Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

  *              the same task (to save resource), any delay in this callback will cause delay in reponse on other classes.

  */

-uint16_t tud_msc_write10_cb(uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count);

+uint16_t tud_msc_write10_cb(uint8_t port, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count);

 

 // p_length [in,out] allocated/maximum length, application update with actual length

 /** \brief 			Callback that is invoked when tinyusb stack received an SCSI command other than \ref SCSI_CMD_WRITE_10 and

  *              \ref SCSI_CMD_READ_10 command from host

- * \param[in]		coreid	    USB Controller ID

+ * \param[in]		port	    USB Controller ID

  * \param[in]		lun         Targeted Logical Unit

  * \param[in]		scsi_cmd    SCSI command contents, application should examine this command block to know which command host requested

  * \param[out]	pp_buffer   Pointer to buffer which application need to update with the address to transfer data with host.

@@ -111,7 +111,7 @@ uint16_t tud_msc_write10_cb(uint8_t coreid, uint8_t lun, void** pp_buffer, uint3
  * \note        Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

  *              the same task (to save resource), any delay in this callback will cause delay in reponse on other classes.

  */

-msc_csw_status_t tud_msc_scsi_cb (uint8_t coreid, uint8_t lun, uint8_t scsi_cmd[16], void const ** pp_buffer, uint16_t* p_length);

+msc_csw_status_t tud_msc_scsi_cb (uint8_t port, uint8_t lun, uint8_t scsi_cmd[16], void const ** pp_buffer, uint16_t* p_length);

 

 /** @} */

 /** @} */

@@ -122,10 +122,10 @@ msc_csw_status_t tud_msc_scsi_cb (uint8_t coreid, uint8_t lun, uint8_t scsi_cmd[
 #ifdef _TINY_USB_SOURCE_FILE_

 

 void mscd_init(void);

-tusb_error_t mscd_open(uint8_t coreid, tusb_descriptor_interface_t const * p_interface_desc, uint16_t *p_length);

-tusb_error_t mscd_control_request_subtask(uint8_t coreid, tusb_control_request_t const * p_request);

+tusb_error_t mscd_open(uint8_t port, tusb_descriptor_interface_t const * p_interface_desc, uint16_t *p_length);

+tusb_error_t mscd_control_request_subtask(uint8_t port, tusb_control_request_t const * p_request);

 tusb_error_t mscd_xfer_cb(endpoint_handle_t edpt_hdl, tusb_event_t event, uint32_t xferred_bytes);

-void mscd_close(uint8_t coreid);

+void mscd_close(uint8_t port);

 

 #endif