move class files

1 files changed, 0 insertions, 137 deletions

diff --git a/tinyusb/class/msc_device.h b/tinyusb/class/msc_device.h
deleted file mode 100644
index c8cc29db8..000000000
--- a/tinyusb/class/msc_device.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/**************************************************************************/

-/*!

-    @file     msc_device.h

-    @author   hathach (tinyusb.org)

-

-    @section LICENSE

-

-    Software License Agreement (BSD License)

-

-    Copyright (c) 2013, hathach (tinyusb.org)

-    All rights reserved.

-

-    Redistribution and use in source and binary forms, with or without

-    modification, are permitted provided that the following conditions are met:

-    1. Redistributions of source code must retain the above copyright

-    notice, this list of conditions and the following disclaimer.

-    2. Redistributions in binary form must reproduce the above copyright

-    notice, this list of conditions and the following disclaimer in the

-    documentation and/or other materials provided with the distribution.

-    3. Neither the name of the copyright holders nor the

-    names of its contributors may be used to endorse or promote products

-    derived from this software without specific prior written permission.

-

-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY

-    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

-    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY

-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

-    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

-    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

-    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

-    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

-

-    This file is part of the tinyusb stack.

-*/

-/**************************************************************************/

-

-#ifndef _TUSB_MSC_DEVICE_H_

-#define _TUSB_MSC_DEVICE_H_

-

-#include "common/common.h"

-#include "device/usbd.h"

-#include "msc.h"

-

-#ifdef __cplusplus

- extern "C" {

-#endif

-

-/** \addtogroup ClassDriver_MSC

- *  @{

- * \defgroup MSC_Device Device

- *  @{ */

-

-//--------------------------------------------------------------------+

-// APPLICATION API

-//--------------------------------------------------------------------+

-

-//--------------------------------------------------------------------+

-// APPLICATION CALLBACK API

-//--------------------------------------------------------------------+

-

-/** \brief 			Callback that is invoked when tinyusb stack received \ref SCSI_CMD_READ_10 command from host

- * \param[in]		coreid	    USB Controller ID

- * \param[in]		lun         Targeted Logical Unit

- * \param[out]	pp_buffer   Pointer to buffer which application need to update with the response data's address.

- *                          Must be accessible by USB controller (see \ref TUSB_CFG_ATTR_USBRAM)

- * \param[in]		lba         Starting Logical Block Address to be read

- * \param[in]		block_count Number of requested block

- * \retval      non-zero    Actual number of block that application processed, must be less than or equal to \a \b block_count.

- * \retval      zero        Indicate error in retrieving data from application. Tinyusb device stack will \b STALL the corresponding

- *                          endpoint and return failed status in command status wrapper phase.

- * \note        Host can request dozens of Kbytes in one command e.g \a \b block_count = 128, it is insufficient to require

- *              application to have that much of buffer. Instead, application can return the number of blocks it can processed,

- *              the stack after transferred that amount of data will continue to invoke this callback with adjusted \a \b lba and \a \b block_count.

- *              \n\n Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

- *              the same task (to save resource), any delay in this callback will cause delay in reponse on other classes.

- */

-uint16_t tud_msc_read10_cb (uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count);

-

-/** \brief 			Callback that is invoked when tinyusb stack received \ref SCSI_CMD_WRITE_10 command from host

- * \param[in]		coreid	    USB Controller ID

- * \param[in]		lun         Targeted Logical Unit

- * \param[out]	pp_buffer   Pointer to buffer which application need to update with the address to hold data from host

- *                          Must be accessible by USB controller (see \ref TUSB_CFG_ATTR_USBRAM)

- * \param[in]		lba         Starting Logical Block Address to be write

- * \param[in]		block_count Number of requested block

- * \retval      non-zero    Actual number of block that application can receive and must be less than or equal to \a \b block_count.

- * \retval      zero        Indicate error in retrieving data from application. Tinyusb device stack will \b STALL the corresponding

- *                          endpoint and return failed status in command status wrapper phase.

- * \note        Host can request dozens of Kbytes in one command e.g \a \b block_count = 128, it is insufficient to require

- *              application to have that much of buffer. Instead, application can return the number of blocks it can processed,

- *              the stack after transferred that amount of data will continue to invoke this callback with adjusted \a \b lba and \a \b block_count.

- *              \n\n Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

- *              the same task (to save resource), any delay in this callback will cause delay in reponse on other classes.

- */

-uint16_t tud_msc_write10_cb(uint8_t coreid, uint8_t lun, void** pp_buffer, uint32_t lba, uint16_t block_count);

-

-// p_length [in,out] allocated/maximum length, application update with actual length

-/** \brief 			Callback that is invoked when tinyusb stack received an SCSI command other than \ref SCSI_CMD_WRITE_10 and

- *              \ref SCSI_CMD_READ_10 command from host

- * \param[in]		coreid	    USB Controller ID

- * \param[in]		lun         Targeted Logical Unit

- * \param[in]		scsi_cmd    SCSI command contents, application should examine this command block to know which command host requested

- * \param[out]	pp_buffer   Pointer to buffer which application need to update with the address to transfer data with host.

- *                          The buffer address can be anywhere since the stack will copy its contents to a internal USB-accessible buffer.

- * \param[in]		p_length    length

- * \retval      non-zero    Actual number of block that application can receive and must be less than or equal to \a \b block_count.

- * \retval      zero        Indicate error in retrieving data from application. Tinyusb device stack will \b STALL the corresponding

- *                          endpoint and return failed status in command status wrapper phase.

- * \note        Although this callback is called by tinyusb device task (non-isr context), however as all the classes share

- *              the same task (to save resource), any delay in this callback will cause delay in reponse on other classes.

- */

-msc_csw_status_t tud_msc_scsi_cb (uint8_t coreid, uint8_t lun, uint8_t scsi_cmd[16], void const ** pp_buffer, uint16_t* p_length);

-

-/** @} */

-/** @} */

-

-//--------------------------------------------------------------------+

-// USBD-CLASS DRIVER API

-//--------------------------------------------------------------------+

-#ifdef _TINY_USB_SOURCE_FILE_

-

-void mscd_init(void);

-tusb_error_t mscd_open(uint8_t coreid, tusb_descriptor_interface_t const * p_interface_desc, uint16_t *p_length);

-tusb_error_t mscd_control_request_subtask(uint8_t coreid, tusb_control_request_t const * p_request);

-tusb_error_t mscd_xfer_cb(endpoint_handle_t edpt_hdl, tusb_event_t event, uint32_t xferred_bytes);

-void mscd_close(uint8_t coreid);

-

-#endif

-

-#ifdef __cplusplus

- }

-#endif

-

-#endif /* _TUSB_MSC_DEVICE_H_ */

-