rename endpoint_handle_t to edpt_hdl_t

1 files changed, 8 insertions, 8 deletions

diff --git a/tinyusb/device/dcd.h b/tinyusb/device/dcd.h
index 344ec4f3c..b786a92a1 100644
--- a/tinyusb/device/dcd.h
+++ b/tinyusb/device/dcd.h
@@ -62,9 +62,9 @@ typedef enum
 typedef struct {

   uint8_t port;

   uint8_t index; // must be zero to indicate control

-} endpoint_handle_t;

+} edpt_hdl_t;

 

-static inline bool edpt_equal(endpoint_handle_t x, endpoint_handle_t y)

+static inline bool edpt_equal(edpt_hdl_t x, edpt_hdl_t y)

 {

   return (x.port == y.port) && (x.index == y.index);

 }

@@ -79,22 +79,22 @@ void hal_dcd_set_config  (uint8_t port, uint8_t config_num);
 /*------------- Event function -------------*/

 void hal_dcd_bus_event(uint8_t port, usbd_bus_event_type_t bus_event);

 void hal_dcd_setup_received(uint8_t port, uint8_t const* p_request);

-void usbd_xfer_isr(endpoint_handle_t edpt_hdl, tusb_event_t event, uint32_t xferred_bytes);

+void usbd_xfer_isr(edpt_hdl_t edpt_hdl, tusb_event_t event, uint32_t xferred_bytes);

 

 //------------- PIPE API -------------//

 bool hal_dcd_control_xfer(uint8_t port, tusb_direction_t dir, uint8_t * p_buffer, uint16_t length, bool int_on_complete);

 void hal_dcd_control_stall(uint8_t port);

 

-bool hal_dcd_pipe_open(uint8_t port, tusb_descriptor_endpoint_t const * p_endpoint_desc, endpoint_handle_t* eh);

+bool hal_dcd_pipe_open(uint8_t port, tusb_descriptor_endpoint_t const * p_endpoint_desc, edpt_hdl_t* eh);

 

 

-tusb_error_t dcd_pipe_queue_xfer(endpoint_handle_t edpt_hdl, uint8_t * buffer, uint16_t total_bytes); // only queue, not transferring yet

-tusb_error_t hal_dcd_pipe_xfer(endpoint_handle_t edpt_hdl, uint8_t * buffer, uint16_t total_bytes, bool int_on_complete);

+tusb_error_t dcd_pipe_queue_xfer(edpt_hdl_t edpt_hdl, uint8_t * buffer, uint16_t total_bytes); // only queue, not transferring yet

+tusb_error_t hal_dcd_pipe_xfer(edpt_hdl_t edpt_hdl, uint8_t * buffer, uint16_t total_bytes, bool int_on_complete);

 

-bool dcd_pipe_is_busy(endpoint_handle_t edpt_hdl);

+bool dcd_pipe_is_busy(edpt_hdl_t edpt_hdl);

 

 // TODO port + endpoint address are part of endpoint handle, not endpoint handle, data toggle also need to be reset

-void hal_dcd_pipe_stall(endpoint_handle_t edpt_hdl);

+void hal_dcd_pipe_stall(edpt_hdl_t edpt_hdl);

 void hal_dcd_pipe_clear_stall(uint8_t port, uint8_t edpt_addr);

 

 #ifdef __cplusplus