add windows driver for cdc

add simple echo cdc serial demo
add cdc device send/receive API
refractor descriptor
refractor cdc.h
add usbd driver function
- init
- bus_reset

1 files changed, 0 insertions, 141 deletions

diff --git a/tinyusb/device/romdriver/error.h b/tinyusb/device/romdriver/error.h
deleted file mode 100644
index 4849044bb..000000000
--- a/tinyusb/device/romdriver/error.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/***********************************************************************
-* $Id:: error.h 228 2011-07-15 18:58:20Z usb06052               $
-*
-* Project: LPC chip software
-*
-* Description:
-*     This file contains unified error codes to be used across driver,
-* middleware, applications, hal and demo software. 
-*
-* Notes:
-*
-***********************************************************************
-* Software that is described herein is for illustrative purposes only
-* which provides customers with programming information regarding the
-* products. This software is supplied "AS IS" without any warranties.
-* NXP Semiconductors assumes no responsibility or liability for the
-* use of the software, conveys no license or title under any patent,
-* copyright, or mask work right to the product. NXP Semiconductors
-* reserves the right to make changes in the software without
-* notification. NXP Semiconductors also make no representation or
-* warranty that such application will be suitable for the specified
-* use without further testing or modification.
-**********************************************************************/
-#ifndef __LPC_ERROR_H__
-#define __LPC_ERROR_H__
-
-/** \file
- *  \brief Error code returned by Boot ROM drivers/library functions.
- *  \ingroup Common
- *
- *  This file contains unified error codes to be used across driver,
- *  middleware, applications, hal and demo software.
- *
- */
-
-/** Error code returned by Boot ROM drivers/library functions 
-* 
-*  Error codes are a 32-bit value with :
-*      - The 16 MSB contains the peripheral code number
-*      - The 16 LSB contains an error code number associated to that peripheral
-*   
-*/
-
-typedef enum
-{
-  /**\b 0x00000000*/ LPC_OK=0, /**< enum value returned on Success */
-  /**\b 0xFFFFFFFF*/ ERR_FAILED = -1, /**< enum value returned on general failure */
-  
-  /* ISP related errors */
-  ERR_ISP_BASE = 0x00000000,
-  /*0x00000001*/ ERR_ISP_INVALID_COMMAND = ERR_ISP_BASE + 1,
-  /*0x00000002*/ ERR_ISP_SRC_ADDR_ERROR, /* Source address not on word boundary */
-  /*0x00000003*/ ERR_ISP_DST_ADDR_ERROR, /* Destination address not on word or 256 byte boundary */
-  /*0x00000004*/ ERR_ISP_SRC_ADDR_NOT_MAPPED,
-  /*0x00000005*/ ERR_ISP_DST_ADDR_NOT_MAPPED,
-  /*0x00000006*/ ERR_ISP_COUNT_ERROR, /* Byte count is not multiple of 4 or is not a permitted value */
-  /*0x00000007*/ ERR_ISP_INVALID_SECTOR,
-  /*0x00000008*/ ERR_ISP_SECTOR_NOT_BLANK,
-  /*0x00000009*/ ERR_ISP_SECTOR_NOT_PREPARED_FOR_WRITE_OPERATION,
-  /*0x0000000A*/ ERR_ISP_COMPARE_ERROR,
-  /*0x0000000B*/ ERR_ISP_BUSY, /* Flash programming hardware interface is busy */
-  /*0x0000000C*/ ERR_ISP_PARAM_ERROR, /* Insufficient number of parameters */
-  /*0x0000000D*/ ERR_ISP_ADDR_ERROR, /* Address not on word boundary */
-  /*0x0000000E*/ ERR_ISP_ADDR_NOT_MAPPED,
-  /*0x0000000F*/ ERR_ISP_CMD_LOCKED, /* Command is locked */
-  /*0x00000010*/ ERR_ISP_INVALID_CODE, /* Unlock code is invalid */
-  /*0x00000011*/ ERR_ISP_INVALID_BAUD_RATE,
-  /*0x00000012*/ ERR_ISP_INVALID_STOP_BIT,
-  /*0x00000013*/ ERR_ISP_CODE_READ_PROTECTION_ENABLED,
-
-  /* ROM API related errors */
-  ERR_API_BASE = 0x00010000,
-  /**\b 0x00010001*/ ERR_API_INVALID_PARAMS = ERR_API_BASE + 1, /**< Invalid parameters*/
-  /**\b 0x00010002*/ ERR_API_INVALID_PARAM1, /**< PARAM1 is invalid */
-  /**\b 0x00010003*/ ERR_API_INVALID_PARAM2, /**< PARAM2 is invalid */
-  /**\b 0x00010004*/ ERR_API_INVALID_PARAM3, /**< PARAM3 is invalid */
-  /**\b 0x00010005*/ ERR_API_MOD_INIT, /**< API is called before module init */
-
-  /* SPIFI API related errors */
-  ERR_SPIFI_BASE = 0x00020000,
-  /*0x00020001*/ ERR_SPIFI_DEVICE_ERROR =ERR_SPIFI_BASE+1,  
-  /*0x00020002*/ ERR_SPIFI_INTERNAL_ERROR,		    
-  /*0x00020003*/ ERR_SPIFI_TIMEOUT,			    
-  /*0x00020004*/ ERR_SPIFI_OPERAND_ERROR,		    
-  /*0x00020005*/ ERR_SPIFI_STATUS_PROBLEM,		    
-  /*0x00020006*/ ERR_SPIFI_UNKNOWN_EXT, 		    
-  /*0x00020007*/ ERR_SPIFI_UNKNOWN_ID,  		    
-  /*0x00020008*/ ERR_SPIFI_UNKNOWN_TYPE,		    
-  /*0x00020009*/ ERR_SPIFI_UNKNOWN_MFG, 		    
-
-  /* Security API related errors */
-  ERR_SEC_BASE = 0x00030000,
-  /*0x00030001*/	ERR_SEC_AES_WRONG_CMD=ERR_SEC_BASE+1,
-  /*0x00030002*/	ERR_SEC_AES_NOT_SUPPORTED,
-  /*0x00030003*/	ERR_SEC_AES_KEY_ALREADY_PROGRAMMED,
-  
-
-  /* USB device stack related errors */
-  ERR_USBD_BASE = 0x00040000,
-  /**\b 0x00040001*/ ERR_USBD_INVALID_REQ = ERR_USBD_BASE + 1, /**< invalid request */
-  /**\b 0x00040002*/ ERR_USBD_UNHANDLED, /**< Callback did not process the event */
-  /**\b 0x00040003*/ ERR_USBD_STALL,     /**< Stall the endpoint on which the call back is called */
-  /**\b 0x00040004*/ ERR_USBD_SEND_ZLP,  /**< Send ZLP packet on the endpoint on which the call back is called */
-  /**\b 0x00040005*/ ERR_USBD_SEND_DATA, /**< Send data packet on the endpoint on which the call back is called */
-  /**\b 0x00040006*/ ERR_USBD_BAD_DESC,  /**< Bad descriptor*/
-  /**\b 0x00040007*/ ERR_USBD_BAD_CFG_DESC,/**< Bad config descriptor*/
-  /**\b 0x00040009*/ ERR_USBD_BAD_INTF_DESC,/**< Bad interface descriptor*/
-  /**\b 0x0004000a*/ ERR_USBD_BAD_EP_DESC,/**< Bad endpoint descriptor*/
-  /**\b 0x0004000b*/ ERR_USBD_BAD_MEM_BUF, /**< Bad alignment of buffer passed. */
-  /**\b 0x0004000c*/ ERR_USBD_TOO_MANY_CLASS_HDLR, /**< Too many class handlers. */
-
-  /* CGU  related errors */
-  ERR_CGU_BASE = 0x00050000,
-  /*0x00050001*/ ERR_CGU_NOT_IMPL=ERR_CGU_BASE+1,
-  /*0x00050002*/ ERR_CGU_INVALID_PARAM,
-  /*0x00050003*/ ERR_CGU_INVALID_SLICE,
-  /*0x00050004*/ ERR_CGU_OUTPUT_GEN,
-  /*0x00050005*/ ERR_CGU_DIV_SRC,
-  /*0x00050006*/ ERR_CGU_DIV_VAL,
-  /*0x00050007*/ ERR_CGU_SRC, 
-
-  /*  I2C related errors   */
-  ERR_I2C_BASE = 0x00060000,
-/*0x00060001*/	 ERR_I2C_NAK=ERR_I2C_BASE+1,
-/*0x00060002*/	 ERR_I2C_BUFFER_OVERFLOW,    
-/*0x00060003*/	 ERR_I2C_BYTE_COUNT_ERR,     
-/*0x00060004*/	 ERR_I2C_LOSS_OF_ARBRITRATION,    
-/*0x00060005*/	 ERR_I2C_SLAVE_NOT_ADDRESSED,     
-/*0x00060006*/	 ERR_I2C_LOSS_OF_ARBRITRATION_NAK_BIT,   
-/*0x00060007*/	 ERR_I2C_GENERAL_FAILURE,         
-/*0x00060008*/	 ERR_I2C_REGS_SET_TO_DEFAULT
-
-} ErrorCode_t;
-
-
-#ifndef offsetof
-#define offsetof(s,m)   (int)&(((s *)0)->m)
-#endif
-#define COMPILE_TIME_ASSERT(pred)    switch(0){case 0:case pred:;}
-
-#endif /* __LPC_ERROR_H__ */