IAR line ending warning

1 files changed, 69 insertions, 69 deletions

diff --git a/tinyusb/hal/hal_lpc11uxx.c b/tinyusb/hal/hal_lpc11uxx.c
index d1ee35e2c..8a8232904 100644
--- a/tinyusb/hal/hal_lpc11uxx.c
+++ b/tinyusb/hal/hal_lpc11uxx.c
@@ -1,69 +1,69 @@
-/**************************************************************************/
-/*!
-    @file     hal_lpc11uxx.c
-    @author   hathach (tinyusb.org)
-
-    @section LICENSE
-
-    Software License Agreement (BSD License)
-
-    Copyright (c) 2013, hathach (tinyusb.org)
-    All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions are met:
-    1. Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-    2. Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in the
-    documentation and/or other materials provided with the distribution.
-    3. Neither the name of the copyright holders nor the
-    names of its contributors may be used to endorse or promote products
-    derived from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
-    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-    INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-    INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
-    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-    This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-#include "common/common.h"
-#include "hal.h"
-
-#if TUSB_CFG_MCU == MCU_LPC11UXX
-
-tusb_error_t hal_init(void)
-{
-	// TODO remove magic number
-  /* Enable AHB clock to the USB block and USB RAM. */
-  LPC_SYSCON->SYSAHBCLKCTRL |= ((0x1<<14) | (0x1<<27));
-  LPC_SYSCON->PDRUNCFG &= ~( BIT_(8) | BIT_(10) ); // enable USB PLL & USB transceiver
-
-  /* Pull-down is needed, or internally, VBUS will be floating. This is to
-  address the wrong status in VBUSDebouncing bit in CmdStatus register.  */
-  // set PIO0_3 as USB_VBUS
-  LPC_IOCON->PIO0_3   &= ~0x1F;
-  LPC_IOCON->PIO0_3   |= (0x01<<0)  | (1 << 3);            /* Secondary function VBUS */
-
-  // set PIO0_6 as usb connect
-  LPC_IOCON->PIO0_6   &= ~0x07;
-  LPC_IOCON->PIO0_6   |= (0x01<<0);            /* Secondary function SoftConn */
-
-  return TUSB_ERROR_NONE;
-}
-
-void USB_IRQHandler(void)
-{
-  tusb_isr(0);
-}
-
-#endif
+/**************************************************************************/

+/*!

+    @file     hal_lpc11uxx.c

+    @author   hathach (tinyusb.org)

+

+    @section LICENSE

+

+    Software License Agreement (BSD License)

+

+    Copyright (c) 2013, hathach (tinyusb.org)

+    All rights reserved.

+

+    Redistribution and use in source and binary forms, with or without

+    modification, are permitted provided that the following conditions are met:

+    1. Redistributions of source code must retain the above copyright

+    notice, this list of conditions and the following disclaimer.

+    2. Redistributions in binary form must reproduce the above copyright

+    notice, this list of conditions and the following disclaimer in the

+    documentation and/or other materials provided with the distribution.

+    3. Neither the name of the copyright holders nor the

+    names of its contributors may be used to endorse or promote products

+    derived from this software without specific prior written permission.

+

+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY

+    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

+    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

+    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY

+    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

+    INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

+    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND

+    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

+    INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS

+    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+

+    This file is part of the tinyusb stack.

+*/

+/**************************************************************************/

+

+#include "common/common.h"

+#include "hal.h"

+

+#if TUSB_CFG_MCU == MCU_LPC11UXX

+

+tusb_error_t hal_init(void)

+{

+	// TODO remove magic number

+  /* Enable AHB clock to the USB block and USB RAM. */

+  LPC_SYSCON->SYSAHBCLKCTRL |= ((0x1<<14) | (0x1<<27));

+  LPC_SYSCON->PDRUNCFG &= ~( BIT_(8) | BIT_(10) ); // enable USB PLL & USB transceiver

+

+  /* Pull-down is needed, or internally, VBUS will be floating. This is to

+  address the wrong status in VBUSDebouncing bit in CmdStatus register.  */

+  // set PIO0_3 as USB_VBUS

+  LPC_IOCON->PIO0_3   &= ~0x1F;

+  LPC_IOCON->PIO0_3   |= (0x01<<0)  | (1 << 3);            /* Secondary function VBUS */

+

+  // set PIO0_6 as usb connect

+  LPC_IOCON->PIO0_6   &= ~0x07;

+  LPC_IOCON->PIO0_6   |= (0x01<<0);            /* Secondary function SoftConn */

+

+  return TUSB_ERROR_NONE;

+}

+

+void USB_IRQHandler(void)

+{

+  tusb_isr(0);

+}

+

+#endif