diff options
Diffstat (limited to 'boards/board.h')
| -rw-r--r-- | boards/board.h | 174 |
1 files changed, 0 insertions, 174 deletions
diff --git a/boards/board.h b/boards/board.h deleted file mode 100644 index da2e03dd6..000000000 --- a/boards/board.h +++ /dev/null @@ -1,174 +0,0 @@ -/**************************************************************************/
-/*!
- @file board.h
- @author hathach (tinyusb.org)
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2013, hathach (tinyusb.org)
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is part of the tinyusb stack.
-*/
-/**************************************************************************/
-
-/** \ingroup group_demo
- * \defgroup group_board Boards Abstraction Layer
- * @{ */
-
-#ifndef _TUSB_BOARD_H_
-#define _TUSB_BOARD_H_
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include "ansi_escape.h"
-#include "tusb.h"
-
-//--------------------------------------------------------------------+
-// BOARD DEFINE
-//--------------------------------------------------------------------+
-/** \defgroup group_supported_board Supported Boards
- * @{ */
-#define BOARD_LPCXPRESSO11U14 1114 ///< LPCXpresso 11u14, some APIs requires the base board
-#define BOARD_LPCXPRESSO11U68 1168 ///< LPC11U37 from microbuilder http://www.microbuilder.eu/Blog/13-03-14/LPC1xxx_1GHZ_Wireless_Board_Preview.aspx
-#define BOARD_LPCXPRESSO1347 1347 ///< LPCXpresso 1347, some APIs requires the base board
-#define BOARD_LPCXPRESSO1769 1769 ///< LPCXpresso 1769, some APIs requires the base board
-
-#define BOARD_NGX4330 4330 ///< NGX 4330 Xplorer
-#define BOARD_EA4357 4357 ///< Embedded Artists LPC4357 developer kit
-#define BOARD_MCB4300 4300 ///< Keil MCB4300
-#define BOARD_HITEX4350 4350 ///< Hitex 4350
-
-#define BOARD_LPC4357USB 4304 ///< microbuilder.eu
-
-#define BOARD_LPCLINK2 4370 ///< LPClink2 uses as LPC4370 development board
-/** @} */
-
-//--------------------------------------------------------------------+
-// PRINTF TARGET DEFINE
-//--------------------------------------------------------------------+
-/** \defgroup group_printf Printf Retarget
- * \brief Retarget the standard stdio printf/getchar to other IOs
- * @{ */
-#define PRINTF_TARGET_SEMIHOST 1 ///< Using the semihost support from toolchain, requires no hardware but is the slowest
-#define PRINTF_TARGET_UART 2 ///< Using UART as stdio, this is the default for most of the board
-#define PRINTF_TARGET_SWO 3 ///< Using non-instructive serial wire output (SWO), is the best option since it does not slow down MCU but requires supported from debugger and IDE
-#define PRINTF_TARGET_NONE 4 ///< Using none at all.
-/** @} */
-
-#define PRINTF(...) printf(__VA_ARGS__)
-
-//--------------------------------------------------------------------+
-// BOARD INCLUDE
-//--------------------------------------------------------------------+
-#if BOARD == BOARD_LPCXPRESSO11U14
- #include "lpcxpresso/board_lpcxpresso11u14.h"
-#elif BOARD == BOARD_LPCXPRESSO11U68
- #include "lpcxpresso/board_lpcxpresso11u68.h"
-#elif BOARD == BOARD_LPCXPRESSO1347
- #include "lpcxpresso/board_lpcxpresso1347.h"
-#elif BOARD == BOARD_LPCXPRESSO1769
- #include "lpcxpresso/board_lpcxpresso1769.h"
-#elif BOARD == BOARD_NGX4330
- #include "ngx/board_ngx4330.h"
-#elif BOARD == BOARD_EA4357
- #include "embedded_artists/ea4357/board_ea4357.h"
-#elif BOARD == BOARD_MCB4300
- #include "keil/board_mcb4300.h"
-#elif BOARD == BOARD_HITEX4350
- #include "hitex/board_hitex4350.h"
-#elif BOARD == BOARD_LPC4357USB
- #include "microbuilder/board_lpc4357usb.h"
-#elif BOARD == BOARD_LPCLINK2
- #include "lpcxpresso/board_lpclink2.h"
-#else
- #error BOARD is not defined or supported yet
-#endif
-
-//--------------------------------------------------------------------+
-// Common Configuration
-//--------------------------------------------------------------------+
-#define CFG_UART_BAUDRATE 115200 ///< Baudrate for UART
-
-//--------------------------------------------------------------------+
-// Board Common API
-//--------------------------------------------------------------------+
-/** \defgroup group_board_api Board API
- * \brief All the board must support these APIs.
- * @{ */
-
-/// Initialize all required peripherals on board including uart, led, buttons etc ...
-void board_init(void);
-
-/** \brief Turns on and off leds on the board
- * \param[in] on_mask Bitmask for LED's numbers is turning ON
- * \param[out] off_mask Bitmask for LED's numbers is turning OFF
- * \note the \a on_mask is more priority then \a off_mask, if an led's number is present on both.
- * It will be turned ON.
- */
-void board_leds(uint32_t on_mask, uint32_t off_mask);
-
-/** \brief Get the current state of the buttons on the board
- * \return Bitmask where a '1' means active (pressed), a '0' means inactive.
- */
-uint32_t board_buttons(void);
-
-/** \brief Get a character input from UART
- * \return ASCII code of the input character or zero if none.
- */
-uint8_t board_uart_getchar(void);
-
-/** \brief Send a character to UART
- * \param[in] c the character to be sent
- */
-void board_uart_putchar(uint8_t c);
-
-/** @} */
-
-//------------- Board Application -------------//
-void led_blinking_task(void* param);
-
-/// Initialize the LED blinking task application. The initial blinking rate is 1 Hert (1 per second)
-void led_blinking_init(void);
-
-/** \brief Change the blinking rate.
- * \param[in] ms The interval between on and off.
- */
-void led_blinking_set_interval(uint32_t ms);
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_BOARD_H_ */
-
-/** @} */
|