diff options
Diffstat (limited to 'docs/info')
| -rw-r--r-- | docs/info/changelog.rst | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index b359ebb44..d11e1134a 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -2,6 +2,166 @@ Changelog ********* +0.17.0 +====== + +General +------- + +- Improved CI: build both cmake and make. Make use of CircleCI for part of build process to speed up CI +- Add CodeQL Workflow for Code Security Analysis +- Add Clang compiler support +- Add default implementation for weak callbacks functions for better Keil compatibility +- Upgrade hardware-in-the-loop (HIL) testing with more boards and examples: including dual stack example + +Controller Driver (DCD & HCD) +----------------------------- + +- Chipidea + + - Support MCXA + +- DWC2 + + - Fix tickless issue with stm32f7: disable ULPI clock during sleep when using internal phy + - Fix SOF interrupt handling + - Fix fifo level half/empty issue + - Add DWC2 Test Mode support. + - for esp32 force disconnect/connect using USB_WRAP otg pad override + +- FSDEV + + - Rewrite and Generalize driver to support non-stm32 mcu such as wch + - Simplify PMA, HW FIFO access and bit manipulation for different access scheme 1x16, 2x16 and 32 bit + - Add support for ch32 usbd e.g ch32v203 + - Add support for STM32G4 and STM32U5 microcontrollers. + - Fix h5 (32-bit) errata 2.15.1: Buffer description table update completes after CTR interrupt triggers + - ISO EP buffer allocation improvements, implement dcd_edpt_close_all() + + - Fix ch32v203 race condition and stability issue with + + - fix ch32v203 seems to unconditionally accept ZLP on EP0 OUT. + - fix v203 race condition between rx bufsize and RX_STAT which cause PMAOVR, occurs with WRITE10 + - correctly handle setup prepare at dcd_edpt0_status_complete(), which fixes the race condition with windows where we could miss setup packet (setup bit set, but count = 0) + +- MAX3421E + + - Add support for rp2040, esp32 (c3, c6, h2, etc..) + - Add hcd_deinit() for max3421 + - Retry NAK handling next frame to reduce CPU and SPI bus usage + - add cpuctl and pinctl to tuh_configure() option for max3421 + - Implement hcd abort transfer for Max3421 + - Properly Handle NAK Response in MAX3421E driver: correctly switch and skip writing to 2 FIFOs when NAK received. Otherwise, the driver may hang in certain conditions. + +- MSP430: support non-bus-powered + +- MUSB + + - Add support for Analoog devices: max32650, max32666, max32690, max3278002 + +- nRF + + - Fix dcd_edpt_open for iso endpoint + - Handle ISOOUT CRC errors + - Add compile support with old nordic sdk + - Fix a few race conditions + +- OHCI + + - Allow more than 16 devices + +- RP2040 + + - Correctly abort control transfer when new setup arrived. Due to RP2040-E2 only able to fix B2 or later + - Implement hcd abort transfer for rp2040 + - Add support for rp2350 + +- RUSB2 + + - Support ra2a1 pipe number scheme + +- WCH CH32 + + - Added support for USB OTG/FS and FSDev Driver. Update CH32V307 to allow manual select FS or HS driver. + - Fixed various bugs in CH32v307 usbhs driver: endpoint handling and data transfer management. + +Device Stack +------------ + +- Add tud_deinit() and class driver deinit() to deinitialize TinyUSB device stack. +- Add support for generic SOF callback. +- Add set address recovery time 2ms per USB spec. + +- Audio + + - Add audio_test_freertos & audio_4_channel_mic_freertos + - Improved support for Audio Class 2.0 (UAC2) with various bug fixes. + - Add feedback by fifo counting. + +- Bluetooth HCI + + - Issue ZLP on ACL IN ep when transfer is multiple of endpoint max packet size + +- CDC + + - Add tud_cdc_configure_fifo() to make RX/TX buffer persistent (not clear when disconnected) + - Add missing capability bit for CDC ACM serial break support + - Enhanced CDC class with better handling of large data transmissions. + - Add missing capability bit for CDC ACM serial break support + +- HID + + - Added missing key codes for keypad + - Added HID Lighting and Illumination functionality + - Fixed issues in the HID class for more reliable device enumeration. + - Support HID Mouse with absolute positioning + - Use separate buffer for control SET_REPORT, fix conflict with interrupt endpoint out + +- MSC: Added support for SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL + +- Net + + - Rewrite of NCM device driver to improve throughput + - removed obsolete tud_network_link_state_cb() + +- USBTMC Added notification support + +- Vendor + + - Migrate to new endpoint stream API, support non-buffered TX/RX + - Add ZLP for write() when needed + +- Video + + - Enhance UVC descriptors and example + - Video Added support for USB Video Class (UVC) with MJPEG. + - Fix multiple interfaces, add an example of 2ch video capture. + - Fix race for tud_video_n_streaming check + +Host Stack +---------- + +- Added tuh_deinit() to de-initialize TinyUSB host stack. +- Added support for new USB mass storage class APIs. +- Improved error handling and retry mechanisms for unstable devices. + +- CDC Serial + + - Add support for ch34x + - Allow to overwrite CFG_TUH_CDC_FTDI/CP210X/CH32X_VID_PID_LIST + - Enhanced stability of CDC-ACM devices during enumeration. + +- HID + + - Add tuh_hid_receive_abort() + - Add tuh_hid_get_report() + +- Hub + + - Prevent status request to invalid ep_num + - Fix double status xfer + - unroll hub removal + 0.16.0 ====== |