diff options
Diffstat (limited to 'docs/info')
| -rw-r--r-- | docs/info/changelog.rst | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/docs/info/changelog.rst b/docs/info/changelog.rst index bd6712b93..67bb6af65 100644 --- a/docs/info/changelog.rst +++ b/docs/info/changelog.rst @@ -2,6 +2,64 @@ Changelog ********* +0.14.0 +====== + +- Improve compiler support for CCRX and IAR +- Add timeout to osal_queue_receive() +- Add tud_task_ext(timeout, in_isr) as generic version of tud_task(). Same as tuh_task_ext(), tuh_task() +- Enable more warnings -Wnull-dereference -Wuninitialized -Wunused -Wredundant-decls -Wconversion +- Add new examples + - host/bare_api to demonstrate generic (app-level) enumeration and endpoint transfer + - dual/host_hid_to_device_cdc to run both device and host stack concurrently, get HID report from host and print out to device CDC. This example only work with multiple-controller MCUs and rp2040 with the help of pio-usb as added controller. + +Controller Driver (DCD & HCD) +----------------------------- + +- Enhance rhports management to better support dual roles + - CFG_TUD_ENABLED/CFG_TUH_ENABLED, CFG_TUD_MAX_SPEED/CFG_TUH_MAX_SPEED can be used to replace CFG_TUSB_RHPORT0_MODE/CFG_TUSB_RHPORT1_MODE + - tud_init(rphort), tuh_init(rhport) can be used to init stack on specified roothub port (controller) instead of tusb_init(void) +- Add dcd/hcd port specific defines TUP_ (stand for tinyusb port-specific) +- [dwc2] + - Update to support stm32 h72x, h73x with only 1 otg controller + - Fix overwrite with grstctl when disable endpoint +- [EHCI] Fix an issue with EHCI driver +- [msp430] Fix for possible bug in msp430-elf-gcc 9.3.0 +- [nrf5x] Fix DMA access race condition using atomic function +- [pic32] Fix PIC32 santiy +- [rp2040] + - Add PICO-PIO-USB as controller (device/host) support for rp2040 + - Use shared IRQ handlers, so user can also hook the USB IRQ + - Fix resumed signal not reported to device stack +- [stm32fsdev] Add support for stm32wb55 + +Device Stack +------------ + +- [Audio] Add support for feedback endpoint computation + - New API tud_audio_feedback_params_cb(), tud_audio_feedback_interval_isr(). + - Supported computation method are: frequency with fixed/float or power of 2. Feedback with fifo count is not yet supported. + - Fix nitfs (should be 3) in TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR + - Fix typo in audiod_rx_done_cb() +- [DFU] Fix coexistence with other interfaces BTH, RNDIS +- [MSC] Fix inquiry response additional length field +- [Venndor] Improve write performance + +Host Stack +---------- + +- Add new API tuh_configure(rhport, cfg_id, cfg_param) for dynamnic port specific behavior configuration +- [HID] Open OUT endpoint if available +- [Hub] hub clear port and device interrupts +- [USBH] Major improvement + - Rework usbh control transfer with complete callback. New API tuh_control_xfer() though still only carry 1 usbh (no queueing) at a time. + - Add generic endpoint transfer with tuh_edpt_open(), tuh_edpt_xfer(). Require `CFG_TUH_API_EDPT_XFER=1` + - Support app-level enumeration with new APIs + - tuh_descriptor_get(), tuh_descriptor_get_device(), tuh_descriptor_get_configuration(), tuh_descriptor_get_hid_report() + - tuh_descriptor_get_string(), tuh_descriptor_get_manufacturer_string(), tuh_descriptor_get_product_string(), tuh_descriptor_get_serial_string() + - Also add _sync() as sync/blocking version for above APIs + + 0.13.0 ====== |