diff options
Diffstat (limited to 'examples/device/dynamic_configuration/src')
| -rw-r--r-- | examples/device/dynamic_configuration/src/tusb_config.h | 55 | ||||
| -rw-r--r-- | examples/device/dynamic_configuration/src/usb_descriptors.c | 8 |
2 files changed, 40 insertions, 23 deletions
diff --git a/examples/device/dynamic_configuration/src/tusb_config.h b/examples/device/dynamic_configuration/src/tusb_config.h index 958a446ac..2f8072f89 100644 --- a/examples/device/dynamic_configuration/src/tusb_config.h +++ b/examples/device/dynamic_configuration/src/tusb_config.h @@ -34,19 +34,38 @@ // COMMON CONFIGURATION //-------------------------------------------------------------------- -// defined by compiler flags for flexibility +// defined by board.mk #ifndef CFG_TUSB_MCU #error CFG_TUSB_MCU must be defined #endif -#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ - CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56 - #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED) +// RHPort number used for device can be defined by board.mk, default to port 0 +#ifndef BOARD_DEVICE_RHPORT_NUM + #define BOARD_DEVICE_RHPORT_NUM 0 +#endif + +// RHPort max operational speed can defined by board.mk +// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed +#ifndef BOARD_DEVICE_RHPORT_SPEED + #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \ + CFG_TUSB_MCU == OPT_MCU_NUC505 || CFG_TUSB_MCU == OPT_MCU_CXD56) + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_HIGH_SPEED + #else + #define BOARD_DEVICE_RHPORT_SPEED OPT_MODE_FULL_SPEED + #endif +#endif + +// Device mode with rhport and speed defined by board.mk +#if BOARD_DEVICE_RHPORT_NUM == 0 + #define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 + #define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) #else - #define CFG_TUSB_RHPORT0_MODE OPT_MODE_DEVICE + #error "Incorrect RHPort configuration" #endif -#define CFG_TUSB_OS OPT_OS_NONE +// This example doesn't use an RTOS +#define CFG_TUSB_OS OPT_OS_NONE // CFG_TUSB_DEBUG is defined by compiler in DEBUG build // #define CFG_TUSB_DEBUG 0 @@ -75,26 +94,22 @@ #endif //------------- CLASS -------------// -#define CFG_TUD_CDC 1 -#define CFG_TUD_MSC 1 -#define CFG_TUD_HID 0 - -#define CFG_TUD_MIDI 1 -#define CFG_TUD_VENDOR 0 +#define CFG_TUD_CDC 1 +#define CFG_TUD_MSC 1 +#define CFG_TUD_MIDI 1 +#define CFG_TUD_HID 0 +#define CFG_TUD_VENDOR 0 // CDC FIFO size of TX and RX -#define CFG_TUD_CDC_RX_BUFSIZE 64 -#define CFG_TUD_CDC_TX_BUFSIZE 64 +#define CFG_TUD_CDC_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_CDC_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MIDI FIFO size of TX and RX -#define CFG_TUD_MIDI_RX_BUFSIZE 64 -#define CFG_TUD_MIDI_TX_BUFSIZE 64 +#define CFG_TUD_MIDI_RX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) +#define CFG_TUD_MIDI_TX_BUFSIZE (TUD_OPT_HIGH_SPEED ? 512 : 64) // MSC Buffer size of Device Mass storage -#define CFG_TUD_MSC_BUFSIZE 512 - -// HID buffer size Should be sufficient to hold ID (if any) + Data -#define CFG_TUD_HID_BUFSIZE 16 +#define CFG_TUD_MSC_EP_BUFSIZE 512 #ifdef __cplusplus } diff --git a/examples/device/dynamic_configuration/src/usb_descriptors.c b/examples/device/dynamic_configuration/src/usb_descriptors.c index 63468b496..9ccb37654 100644 --- a/examples/device/dynamic_configuration/src/usb_descriptors.c +++ b/examples/device/dynamic_configuration/src/usb_descriptors.c @@ -166,7 +166,7 @@ uint8_t const desc_configuration_0[] = TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, 64), // Interface number, string index, EP Out & EP In address, EP size - TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; @@ -176,7 +176,7 @@ uint8_t const desc_configuraiton_1[] = TUD_CONFIG_DESCRIPTOR(1, ITF_1_NUM_TOTAL, 0, CONFIG_1_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100), // Interface number, string index, EP Out & EP In address, EP size - TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64), + TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64), }; @@ -218,7 +218,8 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) chr_count = 1; }else { - // Convert ASCII string into UTF-16 + // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors. + // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL; @@ -228,6 +229,7 @@ uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid) chr_count = strlen(str); if ( chr_count > 31 ) chr_count = 31; + // Convert ASCII string into UTF-16 for(uint8_t i=0; i<chr_count; i++) { _desc_str[1+i] = str[i]; |