diff options
Diffstat (limited to 'examples/device/hid_composite')
| -rw-r--r-- | examples/device/hid_composite/CMakeLists.txt | 15 | ||||
| -rw-r--r-- | examples/device/hid_composite/Makefile | 8 | ||||
| -rw-r--r-- | examples/device/hid_composite/skip.txt | 1 | ||||
| -rw-r--r-- | examples/device/hid_composite/src/main.c | 242 | ||||
| -rw-r--r-- | examples/device/hid_composite/src/tusb_config.h | 6 | ||||
| -rw-r--r-- | examples/device/hid_composite/src/usb_descriptors.c | 14 |
6 files changed, 122 insertions, 164 deletions
diff --git a/examples/device/hid_composite/CMakeLists.txt b/examples/device/hid_composite/CMakeLists.txt index 3da8ee3df..f1ddbd125 100644 --- a/examples/device/hid_composite/CMakeLists.txt +++ b/examples/device/hid_composite/CMakeLists.txt @@ -2,31 +2,28 @@ cmake_minimum_required(VERSION 3.20) include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake) -# gets PROJECT name for the example (e.g. <BOARD>-<DIR_NAME>) -family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR}) - -project(${PROJECT} C CXX ASM) +project(hid_composite C CXX ASM) # Checks this example is valid for the family and initializes the project -family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR}) +family_initialize_project(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}) # Espressif has its own cmake build system if(FAMILY STREQUAL "espressif") return() endif() -add_executable(${PROJECT}) +add_executable(${PROJECT_NAME}) # Example source -target_sources(${PROJECT} PUBLIC +target_sources(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c ${CMAKE_CURRENT_SOURCE_DIR}/src/usb_descriptors.c ) # Example include -target_include_directories(${PROJECT} PUBLIC +target_include_directories(${PROJECT_NAME} PUBLIC ${CMAKE_CURRENT_SOURCE_DIR}/src ) # Configure compilation flags and libraries for the example without RTOS. # See the corresponding function in hw/bsp/FAMILY/family.cmake for details. -family_configure_device_example(${PROJECT} noos) +family_configure_device_example(${PROJECT_NAME} noos) diff --git a/examples/device/hid_composite/Makefile b/examples/device/hid_composite/Makefile index 1b4d398cf..1a4b428dc 100644 --- a/examples/device/hid_composite/Makefile +++ b/examples/device/hid_composite/Makefile @@ -1,11 +1,11 @@ -include ../../build_system/make/make.mk +include ../../../hw/bsp/family_support.mk INC += \ src \ - $(TOP)/hw \ + # Example source EXAMPLE_SOURCE += $(wildcard src/*.c) -SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE)) +SRC_C += $(addprefix $(EXAMPLE_PATH)/, $(EXAMPLE_SOURCE)) -include ../../build_system/make/rules.mk +include ../../../hw/bsp/family_rules.mk diff --git a/examples/device/hid_composite/skip.txt b/examples/device/hid_composite/skip.txt new file mode 100644 index 000000000..2c6c2a64c --- /dev/null +++ b/examples/device/hid_composite/skip.txt @@ -0,0 +1 @@ +family:espressif diff --git a/examples/device/hid_composite/src/main.c b/examples/device/hid_composite/src/main.c index fa02a1abe..7c9d5af8d 100644 --- a/examples/device/hid_composite/src/main.c +++ b/examples/device/hid_composite/src/main.c @@ -23,8 +23,8 @@ * */ -#include <stdlib.h> #include <stdio.h> +#include <stdlib.h> #include <string.h> #include "bsp/board_api.h" @@ -41,10 +41,10 @@ * - 1000 ms : device mounted * - 2500 ms : device is suspended */ -enum { +enum { BLINK_NOT_MOUNTED = 250, - BLINK_MOUNTED = 1000, - BLINK_SUSPENDED = 2500, + BLINK_MOUNTED = 1000, + BLINK_SUSPENDED = 2500, }; static uint32_t blink_interval_ms = BLINK_NOT_MOUNTED; @@ -53,24 +53,18 @@ void led_blinking_task(void); void hid_task(void); /*------------- MAIN -------------*/ -int main(void) -{ +int main(void) { board_init(); // init device stack on configured roothub port - tusb_rhport_init_t dev_init = { - .role = TUSB_ROLE_DEVICE, - .speed = TUSB_SPEED_AUTO - }; + tusb_rhport_init_t dev_init = {.role = TUSB_ROLE_DEVICE, .speed = TUSB_SPEED_AUTO}; tusb_init(BOARD_TUD_RHPORT, &dev_init); board_init_after_tusb(); - while (1) - { + while (1) { tud_task(); // tinyusb device task led_blinking_task(); - hid_task(); } } @@ -80,29 +74,25 @@ int main(void) //--------------------------------------------------------------------+ // Invoked when device is mounted -void tud_mount_cb(void) -{ +void tud_mount_cb(void) { blink_interval_ms = BLINK_MOUNTED; } // Invoked when device is unmounted -void tud_umount_cb(void) -{ +void tud_umount_cb(void) { blink_interval_ms = BLINK_NOT_MOUNTED; } // Invoked when usb bus is suspended // remote_wakeup_en : if host allow us to perform remote wakeup // Within 7ms, device must draw an average of current less than 2.5 mA from bus -void tud_suspend_cb(bool remote_wakeup_en) -{ - (void) remote_wakeup_en; +void tud_suspend_cb(bool remote_wakeup_en) { + (void)remote_wakeup_en; blink_interval_ms = BLINK_SUSPENDED; } // Invoked when usb bus is resumed -void tud_resume_cb(void) -{ +void tud_resume_cb(void) { blink_interval_ms = tud_mounted() ? BLINK_MOUNTED : BLINK_NOT_MOUNTED; } @@ -110,157 +100,128 @@ void tud_resume_cb(void) // USB HID //--------------------------------------------------------------------+ -static void send_hid_report(uint8_t report_id, uint32_t btn) -{ +static void send_hid_report(uint8_t report_id, uint32_t btn) { // skip if hid is not ready yet - if ( !tud_hid_ready() ) return; + if (!tud_hid_ready()) { + return; + } - switch(report_id) - { - case REPORT_ID_KEYBOARD: - { + switch (report_id) { + case REPORT_ID_KEYBOARD: { // use to avoid send multiple consecutive zero report for keyboard static bool has_keyboard_key = false; - if ( btn ) - { - uint8_t keycode[6] = { 0 }; - keycode[0] = HID_KEY_A; + if (btn != 0u) { + uint8_t keycode[6] = {0}; + keycode[0] = HID_KEY_A; tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, keycode); has_keyboard_key = true; - }else - { + } else { // send empty key report if previously has key pressed - if (has_keyboard_key) tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + if (has_keyboard_key) { + tud_hid_keyboard_report(REPORT_ID_KEYBOARD, 0, NULL); + } has_keyboard_key = false; } + break; } - break; - case REPORT_ID_MOUSE: - { + case REPORT_ID_MOUSE: { int8_t const delta = 5; // no button, right + down, no scroll, no pan tud_hid_mouse_report(REPORT_ID_MOUSE, 0x00, delta, delta, 0, 0); + break; } - break; - case REPORT_ID_CONSUMER_CONTROL: - { + case REPORT_ID_CONSUMER_CONTROL: { // use to avoid send multiple consecutive zero report static bool has_consumer_key = false; - if ( btn ) - { + if (btn != 0u) { // volume down uint16_t volume_down = HID_USAGE_CONSUMER_VOLUME_DECREMENT; tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &volume_down, 2); has_consumer_key = true; - }else - { + } else { // send empty key report (release key) if previously has key pressed uint16_t empty_key = 0; - if (has_consumer_key) tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + if (has_consumer_key) { + tud_hid_report(REPORT_ID_CONSUMER_CONTROL, &empty_key, 2); + } has_consumer_key = false; } + break; } - break; - case REPORT_ID_GAMEPAD: - { + case REPORT_ID_GAMEPAD: { // use to avoid send multiple consecutive zero report for keyboard static bool has_gamepad_key = false; - hid_gamepad_report_t report = - { - .x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, - .hat = 0, .buttons = 0 - }; + hid_gamepad_report_t report = {.x = 0, .y = 0, .z = 0, .rz = 0, .rx = 0, .ry = 0, .hat = 0, .buttons = 0}; - if ( btn ) - { - report.hat = GAMEPAD_HAT_UP; + if (btn != 0u) { + report.hat = GAMEPAD_HAT_UP; report.buttons = GAMEPAD_BUTTON_A; tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); has_gamepad_key = true; - }else - { - report.hat = GAMEPAD_HAT_CENTERED; + } else { + report.hat = GAMEPAD_HAT_CENTERED; report.buttons = 0; - if (has_gamepad_key) tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + if (has_gamepad_key) { + tud_hid_report(REPORT_ID_GAMEPAD, &report, sizeof(report)); + } has_gamepad_key = false; } + break; } - break; - default: break; - } -} - -/* use this to send stylus touch signal through USB. */ -static void send_stylus_touch(uint16_t x, uint16_t y, bool state) -{ - // skip if hid is not ready yet - if ( !tud_hid_ready() ) return; - - static bool has_stylus_pen = false; - hid_stylus_report_t report = - { - .attr = 0, - .x = 0, - .y = 0 - }; + case REPORT_ID_STYLUS_PEN: { + static bool touch_state = false; + hid_stylus_report_t report = {.attr = 0, .x = 0, .y = 0}; - report.x = x; - report.y = y; - - if (state) - { - report.attr = STYLUS_ATTR_TIP_SWITCH | STYLUS_ATTR_IN_RANGE; - tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + if (btn != 0u) { + report.attr = STYLUS_ATTR_TIP_SWITCH | STYLUS_ATTR_IN_RANGE; + report.x = 100; + report.y = 100; + tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + touch_state = true; + } else { + report.attr = 0; + if (touch_state) { + tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); + } + touch_state = false; + } + break; + } - has_stylus_pen = true; - }else - { - report.attr = 0; - if (has_stylus_pen) tud_hid_report(REPORT_ID_STYLUS_PEN, &report, sizeof(report)); - has_stylus_pen = false; + default: break; // unknown report id } - } // Every 10ms, we will sent 1 report for each HID profile (keyboard, mouse etc ..) // tud_hid_report_complete_cb() is used to send the next report after previous one is complete -void hid_task(void) -{ +void hid_task(void) { // Poll every 10ms - const uint32_t interval_ms = 10; - static uint32_t start_ms = 0; - static uint32_t touch_ms = 0; - static bool touch_state = false; + const uint32_t interval_ms = 10; + static uint32_t start_ms = 0; - if (board_millis() - touch_ms < 100) { - touch_ms = board_millis(); - send_stylus_touch(0, 0, touch_state = !touch_state); - return; + if (tusb_time_millis_api() - start_ms < interval_ms) { + return; // not enough time } - - if ( board_millis() - start_ms < interval_ms) return; // not enough time start_ms += interval_ms; uint32_t const btn = board_button_read(); // Remote wakeup - if ( tud_suspended() && btn ) - { + if (tud_suspended() && btn != 0u) { // Wake up host if we are in suspend mode // and REMOTE_WAKEUP feature is enabled by host tud_remote_wakeup(); - }else - { + } else { // Send the 1st of report chain, the rest will be sent by tud_hid_report_complete_cb() send_hid_report(REPORT_ID_KEYBOARD, btn); } @@ -269,15 +230,13 @@ void hid_task(void) // Invoked when sent REPORT successfully to host // Application can use this to send the next report // Note: For composite reports, report[0] is report ID -void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_t len) -{ - (void) instance; - (void) len; +void tud_hid_report_complete_cb(uint8_t instance, uint8_t const *report, uint16_t len) { + (void)instance; + (void)len; uint8_t next_report_id = report[0] + 1u; - if (next_report_id < REPORT_ID_COUNT) - { + if (next_report_id < REPORT_ID_COUNT) { send_hid_report(next_report_id, board_button_read()); } } @@ -285,41 +244,39 @@ void tud_hid_report_complete_cb(uint8_t instance, uint8_t const* report, uint16_ // Invoked when received GET_REPORT control request // Application must fill buffer report's content and return its length. // Return zero will cause the stack to STALL request -uint16_t tud_hid_get_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t* buffer, uint16_t reqlen) -{ +uint16_t tud_hid_get_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t *buffer, uint16_t reqlen) { // TODO not Implemented - (void) instance; - (void) report_id; - (void) report_type; - (void) buffer; - (void) reqlen; + (void)instance; + (void)report_id; + (void)report_type; + (void)buffer; + (void)reqlen; return 0; } // Invoked when received SET_REPORT control request or // received data on OUT endpoint ( Report ID = 0, Type = 0 ) -void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const* buffer, uint16_t bufsize) -{ - (void) instance; +void tud_hid_set_report_cb( + uint8_t instance, uint8_t report_id, hid_report_type_t report_type, uint8_t const *buffer, uint16_t bufsize) { + (void)instance; - if (report_type == HID_REPORT_TYPE_OUTPUT) - { + if (report_type == HID_REPORT_TYPE_OUTPUT) { // Set keyboard LED e.g Capslock, Numlock etc... - if (report_id == REPORT_ID_KEYBOARD) - { + if (report_id == REPORT_ID_KEYBOARD) { // bufsize should be (at least) 1 - if ( bufsize < 1 ) return; + if (bufsize < 1) { + return; + } uint8_t const kbd_leds = buffer[0]; - if (kbd_leds & KEYBOARD_LED_CAPSLOCK) - { + if ((kbd_leds & KEYBOARD_LED_CAPSLOCK) != 0u) { // Capslock On: disable blink, turn led on blink_interval_ms = 0; board_led_write(true); - }else - { + } else { // Caplocks Off: back to normal blink board_led_write(false); blink_interval_ms = BLINK_MOUNTED; @@ -331,16 +288,19 @@ void tud_hid_set_report_cb(uint8_t instance, uint8_t report_id, hid_report_type_ //--------------------------------------------------------------------+ // BLINKING TASK //--------------------------------------------------------------------+ -void led_blinking_task(void) -{ - static uint32_t start_ms = 0; - static bool led_state = false; +void led_blinking_task(void) { + static uint32_t start_ms = 0; + static bool led_state = false; // blink is disabled - if (!blink_interval_ms) return; + if (0u == blink_interval_ms) { + return; + } // Blink every interval ms - if ( board_millis() - start_ms < blink_interval_ms) return; // not enough time + if (tusb_time_millis_api() - start_ms < blink_interval_ms) { + return; // not enough time + } start_ms += blink_interval_ms; board_led_write(led_state); diff --git a/examples/device/hid_composite/src/tusb_config.h b/examples/device/hid_composite/src/tusb_config.h index 6bd32c427..895745ed2 100644 --- a/examples/device/hid_composite/src/tusb_config.h +++ b/examples/device/hid_composite/src/tusb_config.h @@ -23,8 +23,8 @@ * */ -#ifndef _TUSB_CONFIG_H_ -#define _TUSB_CONFIG_H_ +#ifndef TUSB_CONFIG_H_ +#define TUSB_CONFIG_H_ #ifdef __cplusplus extern "C" { @@ -104,4 +104,4 @@ } #endif -#endif /* _TUSB_CONFIG_H_ */ +#endif /* TUSB_CONFIG_H_ */ diff --git a/examples/device/hid_composite/src/usb_descriptors.c b/examples/device/hid_composite/src/usb_descriptors.c index ce7fbd13f..46e4b63f9 100644 --- a/examples/device/hid_composite/src/usb_descriptors.c +++ b/examples/device/hid_composite/src/usb_descriptors.c @@ -33,9 +33,9 @@ * Auto ProductID layout's Bitmap: * [MSB] HID | MSC | CDC [LSB] */ -#define _PID_MAP(itf, n) ( (CFG_TUD_##itf) << (n) ) -#define USB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \ - _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) ) +#define PID_MAP(itf, n) ((CFG_TUD_##itf) ? (1 << (n)) : 0) +#define USB_PID (0x4000 | PID_MAP(CDC, 0) | PID_MAP(MSC, 1) | PID_MAP(HID, 2) | \ + PID_MAP(MIDI, 3) | PID_MAP(VENDOR, 4) ) #define USB_VID 0xCafe #define USB_BCD 0x0200 @@ -43,7 +43,7 @@ //--------------------------------------------------------------------+ // Device Descriptors //--------------------------------------------------------------------+ -tusb_desc_device_t const desc_device = +static tusb_desc_device_t const desc_device = { .bLength = sizeof(tusb_desc_device_t), .bDescriptorType = TUSB_DESC_DEVICE, @@ -120,10 +120,10 @@ uint8_t const desc_configuration[] = // Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration // other speed configuration -uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; +static uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN]; // device qualifier is mostly similar to device descriptor since we don't change configuration based on speed -tusb_desc_device_qualifier_t const desc_device_qualifier = +static tusb_desc_device_qualifier_t const desc_device_qualifier = { .bLength = sizeof(tusb_desc_device_qualifier_t), .bDescriptorType = TUSB_DESC_DEVICE_QUALIFIER, @@ -188,7 +188,7 @@ enum { }; // array of pointer to string descriptors -char const *string_desc_arr[] = +static char const *string_desc_arr[] = { (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409) "TinyUSB", // 1: Manufacturer |