diff options
Diffstat (limited to 'examples/device_composite/src/msc_app.c')
| -rw-r--r-- | examples/device_composite/src/msc_app.c | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/examples/device_composite/src/msc_app.c b/examples/device_composite/src/msc_app.c new file mode 100644 index 000000000..52cf58f78 --- /dev/null +++ b/examples/device_composite/src/msc_app.c @@ -0,0 +1,115 @@ +/**************************************************************************/ +/*! + @file msc_app.c + @author hathach (tinyusb.org) + + @section LICENSE + + Software License Agreement (BSD License) + + Copyright (c) 2013, hathach (tinyusb.org) + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + 3. Neither the name of the copyright holders nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY + DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + This file is part of the tinyusb stack. + */ +/**************************************************************************/ + +#include "msc_app.h" + +#if CFG_TUD_MSC + +//--------------------------------------------------------------------+ +// MACRO CONSTANT TYPEDEF +//--------------------------------------------------------------------+ + +//--------------------------------------------------------------------+ +// tinyusb callbacks +//--------------------------------------------------------------------+ + +// Callback invoked when received an SCSI command not in built-in list below +// - READ_CAPACITY10, READ_FORMAT_CAPACITY, INQUIRY, MODE_SENSE6, REQUEST_SENSE +// - READ10 and WRITE10 has their own callbacks +int32_t tud_msc_scsi_cb (uint8_t lun, uint8_t const scsi_cmd[16], void* buffer, uint16_t bufsize) +{ + // read10 & write10 has their own callback and MUST not be handled here + + void const* response = NULL; + uint16_t resplen = 0; + + // most scsi handled is input + bool in_xfer = true; + + switch (scsi_cmd[0]) + { + case SCSI_CMD_TEST_UNIT_READY: + // Command that host uses to check our readiness before sending other commands + resplen = 0; + break; + + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + // Host is about to read/write etc ... better not to disconnect disk + resplen = 0; + break; + + case SCSI_CMD_START_STOP_UNIT: + // Host try to eject/safe remove/poweroff us. We could safely disconnect with disk storage, or go into lower power + /* scsi_start_stop_unit_t const * start_stop = (scsi_start_stop_unit_t const *) scsi_cmd; + // Start bit = 0 : low power mode, if load_eject = 1 : unmount disk storage as well + // Start bit = 1 : Ready mode, if load_eject = 1 : mount disk storage + start_stop->start; + start_stop->load_eject; + */ + resplen = 0; + break; + + + default: + // Set Sense = Invalid Command Operation + tud_msc_set_sense(lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); + + // negative means error -> tinyusb could stall and/or response with failed status + resplen = -1; + break; + } + + // return resplen must not larger than bufsize + if ( resplen > bufsize ) resplen = bufsize; + + if ( response && (resplen > 0) ) + { + if(in_xfer) + { + memcpy(buffer, response, resplen); + }else + { + // SCSI output + } + } + + return resplen; +} + + +#endif |
