1 files changed, 45 insertions, 0 deletions
diff --git a/examples/host/device_info/README.md b/examples/host/device_info/README.md
new file mode 100644
index 000000000..79c359548
--- /dev/null
+++ b/examples/host/device_info/README.md
@@ -0,0 +1,45 @@
+# Host: Device Info
+
+A USB host example that enumerates any attached device and prints its descriptor information over the debug UART. No class drivers are enabled — only the hub driver, so it works with any kind of device.
+
+## What it does
+
+- On mount of any device, fetches and prints the full device descriptor: VID/PID, USB version, device class/subclass/protocol, max packet size, bcdDevice, and number of configurations.
+- Reads and prints the manufacturer, product, and serial-number string descriptors (UTF-16 to UTF-8), falling back to a placeholder serial when none is present.
+- Blinks the board LED, with a faster pattern while no device is mounted.
+- Builds on either the bare main loop or a FreeRTOS task, depending on `CFG_TUSB_OS`.
+
+## Requirements
+
+The board must support USB host mode (provide VBUS to the connected device); some boards need an external USB-A port / host adapter.
+
+## Configuration
+
+Notable `tusb_config.h` settings:
+
+```c
+#define CFG_TUH_ENABLED             1
+#define CFG_TUH_HUB                 1
+#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+```
+
+## Building
+
+CMake:
+
+```bash
+mkdir build && cd build
+cmake -DBOARD=raspberry_pi_pico ..
+cmake --build .
+```
+
+Make:
+
+```bash
+make BOARD=raspberry_pi_pico all
+```
+
+## How to use
+
+Plug any USB device into the board's USB host port. The debug UART prints the device's `ID vvvv:pppp`, serial number, and the decoded device descriptor (a hub lets you attach several devices, each printed in turn). Unplugging the device prints a removal message.