diff options
Diffstat (limited to 'examples')
| -rw-r--r-- | examples/host/audio_host/README.md | 15 | ||||
| -rw-r--r-- | examples/host/audio_host/src/audio_app.c | 24 |
2 files changed, 20 insertions, 19 deletions
diff --git a/examples/host/audio_host/README.md b/examples/host/audio_host/README.md index 326b469e8..e7140bf67 100644 --- a/examples/host/audio_host/README.md +++ b/examples/host/audio_host/README.md @@ -68,7 +68,7 @@ make BOARD=<your_board> flash 2. Connect a USB Audio device (UAC 1.0 or 2.0) to the USB host port 3. Open a serial terminal to view output 4. The example will: - - Print each stream's Feature Unit ID, master mute/volume capabilities, cached volume range, and supported configurations when mounted + - Print each stream's master mute/volume capabilities, cached volume range, and supported configurations when mounted - Look for an S16_LE capture configuration at a preferred sample rate (48 kHz first, 44.1 kHz fallback; stereo preferred, mono accepted) and configure it - Echo captured audio to an S16_LE playback configuration at the same sample rate (same channel count preferred, converted otherwise) - Read/unmute the microphone and speaker Feature Units and set supported master volumes near -6 dB @@ -81,25 +81,25 @@ make BOARD=<your_board> flash TinyUSB Host USB Audio Example Connect a USB Audio Device (UAC 1.0 or 2.0) to test Audio device mounted: idx=0 addr=1 - capture stream 1 Feature Unit ID: 5, configurations: 2 + capture stream 1, configurations: 2 master mute supported master volume range: min=-23040 max=1536 res=256 (1/256 dB) [0] format=1 rate=44100 channels=2 [1] format=1 rate=48000 channels=2 - playback stream 0 Feature Unit ID: 2, configurations: 2 + playback stream 0, configurations: 2 master mute supported master volume range: min=-23040 max=1536 res=256 (1/256 dB) [0] format=1 rate=44100 channels=2 [1] format=1 rate=48000 channels=2 Configuring 48 kHz S16_LE capture (2 channels) Microphone configured - Microphone Feature Unit 5 master mute: off - Microphone Feature Unit 5 master volume: 0 (1/256 dB) + Microphone master mute: off + Microphone master volume: 0 (1/256 dB) Microphone master volume set: -1536 (1/256 dB) Configuring 48 kHz S16_LE playback (2 channels) Speaker configured - Speaker Feature Unit 2 master mute: off - Speaker Feature Unit 2 master volume: 0 (1/256 dB) + Speaker master mute: off + Speaker master volume: 0 (1/256 dB) Speaker master volume set: -1536 (1/256 dB) ``` @@ -115,6 +115,7 @@ Edit `src/tusb_config.h` to modify: ## Notes +- `tuh_audio_descriptor_cb()` exposes the validated Audio Control descriptor block during enumeration. Applications that need raw entity controls must copy the required entity IDs or descriptor fields before the callback returns, then use `tuh_audio_control_xfer()` after the device mounts. - While a stream is running, the driver keeps one isochronous transfer in flight and re-submits on completion, so transfers follow the endpoint's `bInterval`. `tuh_audio_capture_cb()` / `tuh_audio_playback_cb()` report each completed transfer; `tuh_audio_err_cb()` reports failures. The example restarts the failed stream automatically 100 ms after the error callback. - Capture and playback streams running concurrently in the same Audio Control instance must use the same sample rate. - `tuh_audio_read()` / `tuh_audio_write()` are non-blocking FIFO operations: they return the number of whole frames actually queued/read (0 when the FIFO is empty/full or the stream is not running), and `tuh_audio_read_available()` / `tuh_audio_write_available()` report the FIFO occupancy in frames. `tuh_audio_write()` only queues data; the playback transfer-completion chain sends it, or sends silence when the FIFO does not contain a complete polling interval without consuming the partial data. diff --git a/examples/host/audio_host/src/audio_app.c b/examples/host/audio_host/src/audio_app.c index 4623dff5a..8852ca58c 100644 --- a/examples/host/audio_host/src/audio_app.c +++ b/examples/host/audio_host/src/audio_app.c @@ -360,11 +360,9 @@ void tuh_audio_err_cb(uint8_t idx, uint8_t stream_idx, uint16_t xferred_bytes) { // Print all supported stream configurations static void print_stream_configs(uint8_t idx, uint8_t stream_idx) { - const tuh_audio_direction_t dir = tuh_audio_stream_direction(idx, stream_idx); - const char *dir_name = (dir == TUH_AUDIO_STREAM_CAPTURE) ? "capture" : "playback"; - const uint8_t feature_unit_id = tuh_audio_get_feature_unit_id(idx, stream_idx); - printf(" %s stream %u Feature Unit ID: %u, configurations: %u\r\n", dir_name, stream_idx, feature_unit_id, - tuh_audio_config_count(idx, stream_idx)); + const tuh_audio_direction_t dir = tuh_audio_stream_direction(idx, stream_idx); + const char *dir_name = (dir == TUH_AUDIO_STREAM_CAPTURE) ? "capture" : "playback"; + printf(" %s stream %u, configurations: %u\r\n", dir_name, stream_idx, tuh_audio_config_count(idx, stream_idx)); tuh_audio_volume_range_t range; if (tuh_audio_mute_supported(idx, stream_idx)) { printf(" master mute supported\r\n"); @@ -383,17 +381,14 @@ static void print_stream_configs(uint8_t idx, uint8_t stream_idx) { } static void configure_stream_controls(uint8_t idx, uint8_t stream_idx, const char *stream_name) { - const uint8_t feature_unit_id = tuh_audio_get_feature_unit_id(idx, stream_idx); - if (feature_unit_id == 0) { - printf(" %s stream has no master mute/volume Feature Unit\r\n", stream_name); - return; - } + bool has_control = false; if (tuh_audio_mute_supported(idx, stream_idx)) { + has_control = true; bool mute; tusb_xfer_result_t result = tuh_audio_mute_get_sync(idx, stream_idx, &mute); if (result == XFER_RESULT_SUCCESS) { - printf(" %s Feature Unit %u master mute: %s\r\n", stream_name, feature_unit_id, mute ? "on" : "off"); + printf(" %s master mute: %s\r\n", stream_name, mute ? "on" : "off"); result = tuh_audio_mute_set_sync(idx, stream_idx, false); } if (result != XFER_RESULT_SUCCESS) { @@ -403,10 +398,11 @@ static void configure_stream_controls(uint8_t idx, uint8_t stream_idx, const cha tuh_audio_volume_range_t range; if (tuh_audio_volume_range_get(idx, stream_idx, &range)) { + has_control = true; int16_t volume; tusb_xfer_result_t result = tuh_audio_volume_get_sync(idx, stream_idx, &volume); if (result == XFER_RESULT_SUCCESS) { - printf(" %s Feature Unit %u master volume: %d (1/256 dB)\r\n", stream_name, feature_unit_id, volume); + printf(" %s master volume: %d (1/256 dB)\r\n", stream_name, volume); int32_t target = FEATURE_UNIT_VOLUME_DB; target = TU_MAX(target, range.min); target = TU_MIN(target, range.max); @@ -421,6 +417,10 @@ static void configure_stream_controls(uint8_t idx, uint8_t stream_idx, const cha printf(" Accessing %s master volume failed: result=%u\r\n", stream_name, result); } } + + if (!has_control) { + printf(" %s stream has no master mute/volume control\r\n", stream_name); + } } // Invoked when device with Audio interface is un-mounted |