diff options
Diffstat (limited to 'hw/bsp/ra')
80 files changed, 3544 insertions, 1443 deletions
diff --git a/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..b132e2559 --- /dev/null +++ b/hw/bsp/ra/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,168 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#pragma GCC diagnostic ignored "-Wundef" + +// extra push due to https://github.com/renesas/fsp/pull/278 +#pragma GCC diagnostic push +#endif + +#include "bsp_api.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS __NVIC_PRIO_BITS + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<<configPRIO_BITS) - 1) + +/* The highest interrupt priority that can be used by any interrupt service +routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL +INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER +PRIORITY THAN THIS! (higher priorities are lower numeric values. */ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 2 + +/* Interrupt priorities used by the kernel port layer itself. These are generic +to all Cortex-M ports, and do not rely on any particular library functions. */ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! +See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +#endif diff --git a/hw/bsp/ra/board_cfg.h b/hw/bsp/ra/board_cfg.h new file mode 100644 index 000000000..baed46b5f --- /dev/null +++ b/hw/bsp/ra/board_cfg.h @@ -0,0 +1,45 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#ifndef _BOARD_CFG_H +#define _BOARD_CFG_H + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(BSP_MCU_GROUP_RA6M5) || defined(BSP_MCU_GROUP_RA6M3) || (BSP_CFG_MCU_PART_SERIES == 8) + #define BOARD_HAS_USB_HIGHSPEED +#endif + +// for SystemInit() +void bsp_init(void * p_args); + + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/portenta_c33/board.cmake b/hw/bsp/ra/boards/portenta_c33/board.cmake new file mode 100644 index 000000000..1837d8450 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/board.cmake @@ -0,0 +1,25 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra6m5) + +set(JLINK_DEVICE R7FA6M5BH) +set(DFU_UTIL_VID_PID 2341:0368) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +# Device port default to PORT1 Highspeed +if (NOT DEFINED PORT) +set(PORT 1) +endif() + +# Host port will be the other port +set(HOST_PORT $<NOT:${PORT}>) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + BOARD_TUD_RHPORT=${PORT} + BOARD_TUH_RHPORT=${HOST_PORT} + # port 0 is fullspeed, port 1 is highspeed + BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> + BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> + ) +endfunction() diff --git a/hw/bsp/ra/boards/portenta_c33/board.h b/hw/bsp/ra/boards/portenta_c33/board.h new file mode 100644 index 000000000..7841ec8b8 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/board.h @@ -0,0 +1,68 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_01_PIN_07 // Red LED +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_04_PIN_08 // D12 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW }, + { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, + + // USB FS + { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH }, + { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, + { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, + + // USB HS + { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS }, + { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, + { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, + + // ETM Trace + #ifdef TRACE_ETM + { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + #endif +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/portenta_c33/board.mk b/hw/bsp/ra/boards/portenta_c33/board.mk new file mode 100644 index 000000000..6a5c2ffce --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/board.mk @@ -0,0 +1,12 @@ +CPU_CORE = cortex-m33 +MCU_VARIANT = ra6m5 + +LD_FILE = ${BOARD_PATH}/${BOARD}.ld + +# Port 1 is highspeed +PORT ?= 1 + +JLINK_DEVICE = R7FA6M5BH +DFU_UTIL_OPTION = -d 2341:0368 -a 0 + +flash: flash-dfu-util diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..33d381850 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,63 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (2) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) +#else + #define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x1000) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..bd6a901c3 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (6) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..6845183db --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M5BH3CFC +#define BSP_MCU_FEATURE_SET ('B') +#define BSP_ROM_SIZE_BYTES (2097152) +#define BSP_RAM_SIZE_BYTES (524288) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (176) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..d5428540f --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,387 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA6M5 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else +#define BSP_TZ_SECURE_BUILD (0) +#define BSP_TZ_NONSECURE_BUILD (0) +#endif + +/* TrustZone Settings */ +#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) +#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) +#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + +/* CMSIS TrustZone Settings */ +#define SCB_CSR_AIRCR_INIT (1) +#define SCB_AIRCR_BFHFNMINS_VAL (0) +#define SCB_AIRCR_SYSRESETREQS_VAL (1) +#define SCB_AIRCR_PRIS_VAL (0) +#define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL +#define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL +#define FPU_FPCCR_TS_VAL (1U) +#endif +#define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL +#define FPU_FPCCR_CLRONRET_VAL (1) +#endif + +/* The C-Cache line size that is configured during startup. */ +#ifndef BSP_CFG_C_CACHE_LINE_SIZE +#define BSP_CFG_C_CACHE_LINE_SIZE (1U) +#endif + +/* Type 1 Peripheral Security Attribution */ + +/* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ + 0x33f4f9) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ + 0x7fffcef4) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + 0xffae07f0) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + 0x3f3ff8) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ + 0xfffffffc) /* Unused */ +#endif + +/* Type 2 Peripheral Security Attribution */ + +/* Security attribution for Cache registers. */ +#ifndef BSP_TZ_CFG_CSAR +#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR +#define BSP_TZ_CFG_LVDSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ + 0xFFFFFFFCU) +#endif + +/* Security attribution for LPM registers. */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) +#endif +/* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) +#endif + +/* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) +#endif +#endif + +/* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) +#endif + +/* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ + 0xFFFF0000U) +#endif + +/* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ +#endif + +/* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_ICUSARC +#define BSP_TZ_CFG_ICUSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ + 0xFFFFFF00U) +#endif + +/* Security attribution registers for SELSR0. */ +#ifndef BSP_TZ_CFG_ICUSARD +#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) +#endif + +/* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED +#define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + +/* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#if BSP_CFG_CLOCKS_SECURE +/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ +#define BSP_TZ_CFG_FSAR (0xFEFEU) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_FSAR (0xFFFFU) +#endif +#endif + +/* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ +#define BSP_TZ_CFG_SRAMSAR (\ + 1 | \ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ + 4 | \ + 0xFFFFFFF8U) +#endif + +/* Security attribution for Standby RAM registers. */ +#ifndef BSP_TZ_CFG_STBRAMSAR +#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) +#endif + +/* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA +/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ +#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) +#endif + +/* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA +#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) +#endif +/* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB +#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) +#endif + +/* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK +#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + +/* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) +#else +#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) +#endif +#endif + +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL +#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) +#endif + +/* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 +#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif +/* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 +#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif +/* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 +#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) +#endif +/* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 +#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 +#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif +/* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 +#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif +/* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 +#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) +#endif +/* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 +#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 +#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif +/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 +#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif +/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 +#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) +#endif +/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 +#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..0eb5e0516 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,37 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ + +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ +#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ + +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld new file mode 100644 index 000000000..ba15588e6 --- /dev/null +++ b/hw/bsp/ra/boards/portenta_c33/portenta_c33.ld @@ -0,0 +1,25 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x80000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x200000; +DATA_FLASH_START = 0x08000000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x0100A100; +OPTION_SETTING_LENGTH = 0x100; +OPTION_SETTING_S_START = 0x0100A200; +OPTION_SETTING_S_LENGTH = 0x100; +ID_CODE_START = 0x00000000; +ID_CODE_LENGTH = 0x0; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x4000000; +OSPI_DEVICE_0_START = 0x68000000; +OSPI_DEVICE_0_LENGTH = 0x8000000; +OSPI_DEVICE_1_START = 0x70000000; +OSPI_DEVICE_1_LENGTH = 0x10000000; + +/* Board has bootloader */ +FLASH_IMAGE_START = 0x10000; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.cmake b/hw/bsp/ra/boards/ra2a1_ek/board.cmake new file mode 100644 index 000000000..4d083ca98 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/board.cmake @@ -0,0 +1,10 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m23 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra2a1) + +set(JLINK_DEVICE R7FA2A1AB) + +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC) +# target_sources(${TARGET} PRIVATE) +# target_include_directories(${BOARD_TARGET} PUBLIC) +endfunction() diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.h b/hw/bsp/ra/boards/ra2a1_ek/board.h new file mode 100644 index 000000000..c132387bc --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_01_PIN_06 +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_01_PIN_05 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, + {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, + // USB FS D+, D-, VBus + {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra2a1_ek/board.mk b/hw/bsp/ra/boards/ra2a1_ek/board.mk new file mode 100644 index 000000000..7a176418e --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/board.mk @@ -0,0 +1,7 @@ +CPU_CORE = cortex-m23 +MCU_VARIANT = ra2a1 + +# For flash-jlink target +JLINK_DEVICE = R7FA2A1AB + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..30637c17b --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,62 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (2) + #elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) + #else +#define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) + #endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x400) +#define BSP_CFG_HEAP_BYTES (0x400) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus + } + #endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..eb82f4697 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (2) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..710e85b28 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA2A1AB3CFM +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (64) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..6caef62cc --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus + extern "C" { + #endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra2a1/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" +#define BSP_MCU_GROUP_RA2A1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) + #elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) + #elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x000FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x000FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus + } + #endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..cd9d135f7 --- /dev/null +++ b/hw/bsp/ra/boards/ra2a1_ek/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,17 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_SDADC_CLOCK_SOURCE (0) /* SDADCCLK Src: HOCO */ +#define BSP_CFG_SDADCCLK_DIV (7) /* SDADCCLK Div /12 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.cmake b/hw/bsp/ra/boards/ra4m1_ek/board.cmake new file mode 100644 index 000000000..7bb48bf44 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/board.cmake @@ -0,0 +1,12 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra4m1) + +set(JLINK_DEVICE R7FA4M1AB) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CFG_EXAMPLE_VIDEO_READONLY + ) +# target_sources(${TARGET} PRIVATE) +# target_include_directories(${BOARD_TARGET} PUBLIC) +endfunction() diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.h b/hw/bsp/ra/boards/ra4m1_ek/board.h new file mode 100644 index 000000000..c132387bc --- /dev/null +++ b/hw/bsp/ra/boards/ra4m1_ek/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_01_PIN_06 +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_01_PIN_05 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, + {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, + // USB FS D+, D-, VBus + {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra4m1_ek/board.mk b/hw/bsp/ra/boards/ra4m1_ek/board.mk index 6a661c0b8..f257c0000 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/board.mk +++ b/hw/bsp/ra/boards/ra4m1_ek/board.mk @@ -1,17 +1,7 @@ -CFLAGS += \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_RAXXX - -FSP_MCU_DIR = hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/ra4m1 -FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m1_ek - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/ra4m1_ek.ld +CPU_CORE = cortex-m4 +MCU_VARIANT = ra4m1 # For flash-jlink target JLINK_DEVICE = R7FA4M1AB -JLINK_IF = SWD flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h index b38a79b40..11d5795df 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_cfg.h @@ -2,9 +2,9 @@ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ -#include "board.h" #include "bsp_clock_cfg.h" #include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" #undef RA_NOT_DEFINED #define BSP_CFG_RTOS (0) @@ -12,7 +12,7 @@ #define BSP_CFG_BOOT_IMAGE (1) #endif #define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x400) +#define BSP_CFG_STACK_MAIN_BYTES (0x800) #define BSP_CFG_HEAP_BYTES (0x1000) #define BSP_CFG_PARAM_CHECKING_ENABLE (1) #define BSP_CFG_ASSERT (0) diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h index 444d32e56..444d32e56 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h index d810dabb2..d810dabb2 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_device_pn_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h index 3bde2db0d..72cdb89e6 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_mcu_family_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -12,16 +12,16 @@ #define BSP_MOCO_HZ (8000000) #define BSP_SUB_CLOCK_HZ (32768) #if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (24000000) + #define BSP_HOCO_HZ (24000000) #elif BSP_CFG_HOCO_FREQUENCY == 2 - #define BSP_HOCO_HZ (32000000) - #elif BSP_CFG_HOCO_FREQUENCY == 4 - #define BSP_HOCO_HZ (48000000) - #elif BSP_CFG_HOCO_FREQUENCY == 5 - #define BSP_HOCO_HZ (64000000) - #else - #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" - #endif + #define BSP_HOCO_HZ (32000000) +#elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) +#elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif #define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) #define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h index 930fa3547..554126523 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/bsp_clock_cfg.h @@ -7,7 +7,7 @@ #define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ #define BSP_CFG_HOCO_FREQUENCY (0) /* HOCO 24MHz */ #define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL Div /2 */ -#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL_8_0) /* PLL Mul x8 */ +#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(8u,0u)) /* PLL Mul x8 */ #define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ #define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ #define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h b/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h deleted file mode 100644 index 37739c12a..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/vector_data.h +++ /dev/null @@ -1,5 +0,0 @@ -/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */ -#define TU_IRQn 0 -#define USBFS_RESUME_IRQn 1 -#define USBFS_FIFO_0_IRQn 2 -#define USBFS_FIFO_1_IRQn 3 diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c b/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c deleted file mode 100644 index ea2204837..000000000 --- a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2022, Rafael Silva - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include <stdio.h> - -#include "bsp/board.h" -#include "bsp_api.h" -#include "r_ioport.h" -#include "r_ioport_api.h" -#include "renesas.h" - -/* Key code for writing PRCR register. */ -#define BSP_PRV_PRCR_KEY (0xA500U) -#define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U) -#define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) - -#define SW1 (BSP_IO_PORT_01_PIN_05) -#define LED1 (BSP_IO_PORT_01_PIN_06) - -#define LED_STATE_ON 1 -#define BUTTON_STATE_ACTIVE 0 - -/* ISR prototypes */ -void usbfs_interrupt_handler(void); -void usbfs_resume_handler(void); -void usbfs_d0fifo_handler(void); -void usbfs_d1fifo_handler(void); - -BSP_DONT_REMOVE const - fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = { - [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */ - [1] = usbfs_resume_handler, /* USBFS RESUME (USBFS resume interrupt) */ - [2] = usbfs_d0fifo_handler, /* USBFS FIFO 0 (DMA transfer request 0) */ - [3] = usbfs_d1fifo_handler, /* USBFS FIFO 1 (DMA transfer request 1) */ -}; -const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = { - [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ - [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ - [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ - [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1) /* USBFS FIFO 1 (DMA transfer request 1) */ -}; - -const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { - { .pin = LED1, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) }, - { .pin = SW1 , .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT) }, - - { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) }, - { .pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) }, - { .pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS) }, - -}; - -const ioport_cfg_t g_bsp_pin_cfg = { - .number_of_pins = sizeof(g_bsp_pin_cfg_data) / sizeof(ioport_pin_cfg_t), - .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], -}; -ioport_instance_ctrl_t g_ioport_ctrl; -const ioport_instance_t g_ioport = {.p_api = &g_ioport_on_ioport, .p_ctrl = &g_ioport_ctrl, .p_cfg = &g_bsp_pin_cfg}; - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void usbfs_interrupt_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -void usbfs_resume_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -void usbfs_d0fifo_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -void usbfs_d1fifo_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -void board_init(void) -{ - /* Configure pins. */ - R_IOPORT_Open(&g_ioport_ctrl, &g_bsp_pin_cfg); - - /* Enable USB_BASE */ - R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK; - R_MSTP->MSTPCRB &= ~(1U << 11U); - R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK; - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - -#if CFG_TUSB_OS == OPT_OS_NONE - /* Init systick */ - SysTick_Config(SystemCoreClock / 1000); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - R_IOPORT_PinWrite(&g_ioport_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); -} - -uint32_t board_button_read(void) -{ - bsp_io_level_t lvl; - R_IOPORT_PinRead(&g_ioport_ctrl, SW1, &lvl); - return lvl == BUTTON_STATE_ACTIVE; -} - -int board_uart_read(uint8_t *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#else -#endif - -int close(int fd) -{ - (void) fd; - return -1; -} -int fstat(int fd, void *pstat) -{ - (void) fd; - (void) pstat; - return 0; -} -off_t lseek(int fd, off_t pos, int whence) -{ - (void) fd; - (void) pos; - (void) whence; - return 0; -} -int isatty(int fd) -{ - (void) fd; - return 1; -} diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.cmake b/hw/bsp/ra/boards/ra4m3_ek/board.cmake new file mode 100644 index 000000000..dfd5fc95a --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/board.cmake @@ -0,0 +1,10 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra4m3) + +set(JLINK_DEVICE R7FA4M3AF) + +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC) +# target_sources(${TARGET} PRIVATE) +# target_include_directories(${BOARD_TARGET} PUBLIC) +endfunction() diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.h b/hw/bsp/ra/boards/ra4m3_ek/board.h new file mode 100644 index 000000000..9dd2545a0 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 (BSP_IO_PORT_04_PIN_15) +#define LED_STATE_ON 1 + +#define SW1 (BSP_IO_PORT_00_PIN_05) +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, + {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, + // USB FS + {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra4m3_ek/board.mk b/hw/bsp/ra/boards/ra4m3_ek/board.mk index d668db0ea..5987269b5 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/board.mk +++ b/hw/bsp/ra/boards/ra4m3_ek/board.mk @@ -1,17 +1,7 @@ -CFLAGS += \ - -mcpu=cortex-m33 \ - -mfloat-abi=hard \ - -mfpu=fpv5-sp-d16 \ - -DCFG_TUSB_MCU=OPT_MCU_RAXXX - -FSP_MCU_DIR = hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/ra4m3 -FSP_BOARD_DIR = hw/mcu/renesas/fsp/ra/board/ra4m3_ek - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/ra4m3_ek.ld +CPU_CORE = cortex-m33 +MCU_VARIANT = ra4m3 # For flash-jlink target JLINK_DEVICE = R7FA4M3AF -JLINK_IF = SWD flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..862ec25b7 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,63 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (RA_NOT_DEFINED) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) +#define BSP_CFG_RTOS (1) +#else +#define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) +#define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x800) +#define BSP_CFG_HEAP_BYTES (0x800) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..444d32e56 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (4) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..1a0bc02e2 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M3AF3CFB +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (1048576) +#define BSP_RAM_SIZE_BYTES (131072) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (144) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..26e184a94 --- /dev/null +++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,386 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra4m3/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" +#define BSP_MCU_GROUP_RA4M3 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) + #elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) + #else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" + #endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else +#define BSP_TZ_SECURE_BUILD (0) +#define BSP_TZ_NONSECURE_BUILD (0) +#endif + +/* TrustZone Settings */ +#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) +#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) +#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + +/* CMSIS TrustZone Settings */ +#define SCB_CSR_AIRCR_INIT (1) +#define SCB_AIRCR_BFHFNMINS_VAL (0) +#define SCB_AIRCR_SYSRESETREQS_VAL (1) +#define SCB_AIRCR_PRIS_VAL (0) +#define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL +#define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL +#define FPU_FPCCR_TS_VAL (1U) +#endif +#define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL +#define FPU_FPCCR_CLRONRET_VAL (1) +#endif + +/* The C-Cache line size that is configured during startup. */ +#ifndef BSP_CFG_C_CACHE_LINE_SIZE +#define BSP_CFG_C_CACHE_LINE_SIZE (1U) +#endif + +/* Type 1 Peripheral Security Attribution */ + +/* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ + 0x33f4f9) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ + 0x7fffcef4) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ + (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + 0xffae07f0) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + 0x3f3ff8) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ + 0xfffffffc) /* Unused */ +#endif + +/* Type 2 Peripheral Security Attribution */ + +/* Security attribution for Cache registers. */ +#ifndef BSP_TZ_CFG_CSAR +#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR +#define BSP_TZ_CFG_LVDSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ + 0xFFFFFFFCU) +#endif + +/* Security attribution for LPM registers. */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) +#endif +/* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) +#endif + +/* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) +#endif +#endif + +/* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) +#endif + +/* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ + 0xFFFF0000U) +#endif + +/* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ +#endif + +/* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_ICUSARC +#define BSP_TZ_CFG_ICUSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ + 0xFFFFFF00U) +#endif + +/* Security attribution registers for SELSR0. */ +#ifndef BSP_TZ_CFG_ICUSARD +#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) +#endif + +/* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED +#define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + +/* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#if BSP_CFG_CLOCKS_SECURE +/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ +#define BSP_TZ_CFG_FSAR (0xFEFEU) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_FSAR (0xFFFFU) +#endif +#endif + +/* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ +#define BSP_TZ_CFG_SRAMSAR (\ + 1 | \ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ + 4 | \ + 0xFFFFFFF8U) +#endif + +/* Security attribution for Standby RAM registers. */ +#ifndef BSP_TZ_CFG_STBRAMSAR +#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) +#endif + +/* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA +/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ +#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) +#endif + +/* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA +#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) +#endif +/* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB +#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) +#endif + +/* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK +#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + +/* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) +#else +#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) +#endif +#endif + +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL +#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) +#endif + +/* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 +#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif +/* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 +#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif +/* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 +#define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) +#endif +/* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 +#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 +#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif +/* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 +#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif +/* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 +#define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 +#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 +#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif +/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 +#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif +/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 +#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 +#define BSP_CFG_ROM_REG_BPS_SEL3 (0xFFFFFFFFU) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h index 4f490f340..80641945d 100644 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h +++ b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_clock_cfg.h @@ -1,27 +1,25 @@ /* generated configuration header file - do not edit */ #ifndef BSP_CLOCK_CFG_H_ #define BSP_CLOCK_CFG_H_ - -#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_SECURE (0) #define BSP_CFG_CLOCKS_OVERRIDE (0) -#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ -#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ -#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ -#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ -#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL_24_0 /* PLL Mul x24.0 */ -#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ -#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */ -#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL_24_0 /* PLL2 Mul x24.0 */ -#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ -#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ -#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ -#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ -#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ -#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ -#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ -#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ -#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ -#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ -#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */ - +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL Mul x24.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL2 Div /3 */ +#define BSP_CFG_PLL2_MUL BSP_CLOCKS_PLL_MUL(24U,0U) /* PLL2 Mul x24.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_4) /* UCLK Div /4 */ #endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_mcu_family_cfg.h deleted file mode 100644 index 4ecda1c66..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_mcu_family_cfg.h +++ /dev/null @@ -1,260 +0,0 @@ -/* generated configuration header file through renesas e2 studio */ -#ifndef BSP_MCU_FAMILY_CFG_H_ -#define BSP_MCU_FAMILY_CFG_H_ - -#include "bsp_clock_cfg.h" -#include "bsp_mcu_info.h" - -#define BSP_CFG_MCU_PART_SERIES (4) -#define BSP_MCU_R7FA4M3AF3CFB -#define BSP_ROM_SIZE_BYTES (1048576) -#define BSP_RAM_SIZE_BYTES (131072) -#define BSP_DATA_FLASH_SIZE_BYTES (8192) -#define BSP_PACKAGE_LQFP -#define BSP_PACKAGE_PINS (144) - -#define BSP_MCU_GROUP_RA4M3 (1) -#define BSP_LOCO_HZ (32768) -#define BSP_MOCO_HZ (8000000) -#define BSP_SUB_CLOCK_HZ (32768) -#if BSP_CFG_HOCO_FREQUENCY == 0 -#define BSP_HOCO_HZ (16000000) -#elif BSP_CFG_HOCO_FREQUENCY == 1 -#define BSP_HOCO_HZ (18000000) -#elif BSP_CFG_HOCO_FREQUENCY == 2 -#define BSP_HOCO_HZ (20000000) -#else -#error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" -#endif - -#define BSP_CFG_FLL_ENABLE (0) - -#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) -#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) -#define BSP_MCU_VBATT_SUPPORT (1) - -#if defined(_RA_TZ_SECURE) -#define BSP_TZ_SECURE_BUILD (1) -#define BSP_TZ_NONSECURE_BUILD (0) -#elif defined(_RA_TZ_NONSECURE) -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (1) -#else -#define BSP_TZ_SECURE_BUILD (0) -#define BSP_TZ_NONSECURE_BUILD (0) -#endif - -/* TrustZone Settings */ -#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) -#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) -#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) - -/* CMSIS TrustZone Settings */ -#define SCB_CSR_AIRCR_INIT (1) -#define SCB_AIRCR_BFHFNMINS_VAL (0) -#define SCB_AIRCR_SYSRESETREQS_VAL (1) -#define SCB_AIRCR_PRIS_VAL (0) -#define TZ_FPU_NS_USAGE (1) -#define SCB_NSACR_CP10_11_VAL (3U) - -#define FPU_FPCCR_TS_VAL (1U) -#define FPU_FPCCR_CLRONRETS_VAL (1) - -#define FPU_FPCCR_CLRONRET_VAL (1) - -/* The C-Cache line size that is configured during startup. */ -#define BSP_CFG_C_CACHE_LINE_SIZE (1U) - -/* Type 1 Peripheral Security Attribution */ - -/* Peripheral Security Attribution Register (PSAR) Settings */ -#define BSP_TZ_CFG_PSARB \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ - (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | 0x33f4f9) /* Unused */ -#define BSP_TZ_CFG_PSARC \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | 0x7fffcef4) /* Unused */ -#define BSP_TZ_CFG_PSARD \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | (((1 > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ - 0xffae07f0) /* Unused */ -#define BSP_TZ_CFG_PSARE \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ - (((1 > 0) ? 0U : 1U) << 25) /* GPT6 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | (((1 > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | (((1 > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ - (((1 > 0) ? 0U : 1U) << 31) /* GPT0 */ | 0x3f3ff8) /* Unused */ -#define BSP_TZ_CFG_MSSAR \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ - 0xfffffffc) /* Unused */ - -/* Type 2 Peripheral Security Attribution */ - -/* Security attribution for Cache registers. */ -#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) - -/* Security attribution for RSTSRn registers. */ -#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) - -/* Security attribution for registers of LVD channels. */ -#define BSP_TZ_CFG_LVDSAR \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ - 0xFFFFFFFCU) - -/* Security attribution for LPM registers. */ -#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) -/* Deep Standby Interrupt Factor Security Attribution Register. */ -#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) - -/* Security attribution for CGC registers. */ -#if BSP_CFG_CLOCKS_SECURE -/* Protect all CGC registers from Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) -#endif - -/* Security attribution for Battery Backup registers. */ -#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) - -/* Security attribution for registers for IRQ channels. */ -#define BSP_TZ_CFG_ICUSARA \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | (((1 > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ - (((1 > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | 0xFFFF0000U) - -/* Security attribution for NMI registers. */ -#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ - -/* Security attribution for registers for DMAC channels */ -#define BSP_TZ_CFG_ICUSARC \ - ((((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ - (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | 0xFFFFFF00U) - -/* Security attribution registers for SELSR0. */ -#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) - -/* Security attribution registers for WUPEN0. */ -#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) - -/* Security attribution registers for WUPEN1. */ -#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) - -/* Set DTCSTSAR if the Secure program uses the DTC. */ -// #if RA_NOT_DEFINED == RA_NOT_DEFINED -#define BSP_TZ_CFG_DTC_USED (0U) -// #else -// #define BSP_TZ_CFG_DTC_USED (1U) -// #endif - -/* Security attribution of FLWT and FCKMHZ registers. */ -/* If the CGC registers are only accessible in Secure mode, than there is no - * reason for nonsecure applications to access FLWT and FCKMHZ. */ -#if BSP_CFG_CLOCKS_SECURE -/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ -#define BSP_TZ_CFG_FSAR (0xFEFEU) -#else -/* Allow Secure and Non-secure write access. */ -#define BSP_TZ_CFG_FSAR (0xFFFFU) -#endif - -/* Security attribution for SRAM registers. */ -/* If the CGC registers are only accessible in Secure mode, than there is no - * reason for Non Secure applications to access - * SRAM0WTEN and therefore there is no reason to access PRCR2. */ -#define BSP_TZ_CFG_SRAMSAR (1 | ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | 4 | 0xFFFFFFF8U) - -/* Security attribution for Standby RAM registers. */ -#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) - -/* Security attribution for the DMAC Bus Master MPU settings. */ -/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. - */ -#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) - -/* Security Attribution Register A for BUS Control registers. */ -#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) -/* Security Attribution Register B for BUS Control registers. */ -#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) - -#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) -#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) -#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) -#define OFS_SEQ4 (3 << 18) | (15 << 20) | (3 << 24) | (3 << 26) -#define OFS_SEQ5 (1 << 28) | (1 << 30) -#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) - -/* Option Function Select Register 1 Security Attribution */ -#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) -#define BSP_CFG_ROM_REG_OFS1_SEL \ - (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) -#else -#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) -#endif - -#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) - -/* Used to create IELS values for the interrupt initialization table - * g_interrupt_event_link_select. */ -#define BSP_PRV_IELS_ENUM(vector) (ELC_##vector) -/* Dual Mode Select Register */ -#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFFFU) -/* Block Protection Register 0 */ -#define BSP_CFG_ROM_REG_BPS0 (~(0U)) -/* Block Protection Register 1 */ -#define BSP_CFG_ROM_REG_BPS1 (~(0U)) -/* Block Protection Register 2 */ -#define BSP_CFG_ROM_REG_BPS2 (0xFFFFFFFFU) -/* Permanent Block Protection Register 0 */ -#define BSP_CFG_ROM_REG_PBPS0 (~(0U)) -/* Permanent Block Protection Register 1 */ -#define BSP_CFG_ROM_REG_PBPS1 (~(0U)) -/* Permanent Block Protection Register 2 */ -#define BSP_CFG_ROM_REG_PBPS2 (0xFFFFFFFFU) -/* Security Attribution for Block Protection Register 0 (If any blocks are - * marked as protected in the secure application, then mark them as secure) */ -#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) -/* Security Attribution for Block Protection Register 1 (If any blocks are - * marked as protected in the secure application, then mark them as secure) */ -#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) -/* Security Attribution for Block Protection Register 2 (If any blocks are - * marked as protected in the secure application, then mark them as secure) */ -#define BSP_CFG_ROM_REG_BPS_SEL2 (0xFFFFFFFFU) -#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) - -#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/r_ioport_cfg.h deleted file mode 100755 index cb7c07932..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/r_ioport_cfg.h +++ /dev/null @@ -1,7 +0,0 @@ -/* generated configuration header file - do not edit */ -#ifndef R_IOPORT_CFG_H_ -#define R_IOPORT_CFG_H_ - -#define IOPORT_CFG_PARAM_CHECKING_ENABLE (BSP_CFG_PARAM_CHECKING_ENABLE) - -#endif /* R_IOPORT_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/vector_data.h b/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/vector_data.h deleted file mode 100644 index 37739c12a..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/vector_data.h +++ /dev/null @@ -1,5 +0,0 @@ -/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */ -#define TU_IRQn 0 -#define USBFS_RESUME_IRQn 1 -#define USBFS_FIFO_0_IRQn 2 -#define USBFS_FIFO_1_IRQn 3 diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c b/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c deleted file mode 100644 index 327ef71d5..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2022, Rafael Silva - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include <stdio.h> - -#include "bsp/board.h" -#include "bsp_api.h" -#include "r_ioport.h" -#include "r_ioport_api.h" -#include "renesas.h" - -/* Key code for writing PRCR register. */ -#define BSP_PRV_PRCR_KEY (0xA500U) -#define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U) -#define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) - -#define SW1 (BSP_IO_PORT_00_PIN_05) -#define SW2 (BSP_IO_PORT_00_PIN_06) -#define LED1 (BSP_IO_PORT_04_PIN_15) -#define LED3 (BSP_IO_PORT_04_PIN_00) -#define LED2 (BSP_IO_PORT_04_PIN_04) - -/* ISR prototypes */ -void usbfs_interrupt_handler(void); -void usbfs_resume_handler(void); -void usbfs_d0fifo_handler(void); -void usbfs_d1fifo_handler(void); - -BSP_DONT_REMOVE const - fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) = { - [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */ - [1] = usbfs_resume_handler, /* USBFS RESUME (USBFS resume interrupt) */ - [2] = usbfs_d0fifo_handler, /* USBFS FIFO 0 (DMA transfer request 0) */ - [3] = usbfs_d1fifo_handler, /* USBFS FIFO 1 (DMA transfer request 1) */ -}; -const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = { - [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ - [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ - [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ - [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1) /* USBFS FIFO 1 (DMA transfer request 1) */ -}; - -const ioport_pin_cfg_t g_bsp_pin_cfg_data[] = { - {.pin = BSP_IO_PORT_04_PIN_07, - .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS)}, - {.pin = BSP_IO_PORT_05_PIN_00, - .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS)}, - {.pin = BSP_IO_PORT_05_PIN_01, - .pin_cfg = ((uint32_t) IOPORT_CFG_PERIPHERAL_PIN | (uint32_t) IOPORT_PERIPHERAL_USB_FS)}, - {.pin = LED1, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW)}, - {.pin = LED2, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW)}, - {.pin = LED3, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW)}, - {.pin = SW1, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT)}, - {.pin = SW2, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_INPUT)}}; - -const ioport_cfg_t g_bsp_pin_cfg = { - .number_of_pins = sizeof(g_bsp_pin_cfg_data) / sizeof(ioport_pin_cfg_t), - .p_pin_cfg_data = &g_bsp_pin_cfg_data[0], -}; -ioport_instance_ctrl_t g_ioport_ctrl; -const ioport_instance_t g_ioport = {.p_api = &g_ioport_on_ioport, .p_ctrl = &g_ioport_ctrl, .p_cfg = &g_bsp_pin_cfg}; - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void usbfs_interrupt_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} -void usbfs_resume_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -void usbfs_d0fifo_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -void usbfs_d1fifo_handler(void) -{ - IRQn_Type irq = R_FSP_CurrentIrqGet(); - R_BSP_IrqStatusClear(irq); - -#if CFG_TUH_ENABLED - tuh_int_handler(0); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -void board_init(void) -{ - /* Configure pins. */ - R_IOPORT_Open(&g_ioport_ctrl, &g_bsp_pin_cfg); - - /* Enable USB_BASE */ - R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_PRC1_UNLOCK; - R_MSTP->MSTPCRB &= ~(1U << 11U); - R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_LOCK; - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(TU_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - -#if CFG_TUSB_OS == OPT_OS_NONE - /* Init systick */ - SysTick_Config(SystemCoreClock / 1000); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - R_IOPORT_PinWrite(&g_ioport_ctrl, LED1, state); - R_IOPORT_PinWrite(&g_ioport_ctrl, LED2, state); - R_IOPORT_PinWrite(&g_ioport_ctrl, LED3, state); -} - -uint32_t board_button_read(void) -{ - bsp_io_level_t lvl; - R_IOPORT_PinRead(&g_ioport_ctrl, SW1, &lvl); - return lvl; -} - -int board_uart_read(uint8_t *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#else -#endif - -int close(int fd) -{ - (void) fd; - return -1; -} -int fstat(int fd, void *pstat) -{ - (void) fd; - (void) pstat; - return 0; -} -off_t lseek(int fd, off_t pos, int whence) -{ - (void) fd; - (void) pos; - (void) whence; - return 0; -} -int isatty(int fd) -{ - (void) fd; - return 1; -} diff --git a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld b/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld deleted file mode 100644 index 5bc335cb4..000000000 --- a/hw/bsp/ra/boards/ra4m3_ek/ra4m3_ek.ld +++ /dev/null @@ -1,575 +0,0 @@ -/* generated memory regions file - do not edit */ -RAM_START = 0x20000000; -RAM_LENGTH = 0x20000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x100000; -DATA_FLASH_START = 0x08000000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x0100A100; -OPTION_SETTING_LENGTH = 0x100; -OPTION_SETTING_S_START = 0x0100A200; -OPTION_SETTING_S_LENGTH = 0x100; -ID_CODE_START = 0x00000000; -ID_CODE_LENGTH = 0x0; -SDRAM_START = 0x90000000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x4000000; -OSPI_DEVICE_0_START = 0x68000000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x70000000; -OSPI_DEVICE_1_LENGTH = 0x0; - -/* - Linker File for Renesas FSP -*/ - -QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH); -OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH); -OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH); - -/* This is a non-secure project if the OPTION_SETTING region is non-zero and it does not start at the base address for - * secure option settings (meaning the secure option settings were already allocated in the secure project). */ -__TZ_NS_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) != ORIGIN(OPTION_SETTING)); - -/* This is a secure project if the option setting base address matches the option setting base address for secure - * option settings. This is also set for flat projects because the CPU runs in secure mode for flat projects. - * This is not defined for projects that do not support TrustZone. */ -__TZ_S_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) == ORIGIN(OPTION_SETTING)); - -/* If a flat (secure) project has defined RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */ -__RESERVE_NS_RAM = __TZ_S_PROJECT && DEFINED(RAM_NS_BUFFER_LENGTH); - -RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0; -RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0; -RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH; -RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH; - -/* Define memory regions. */ -MEMORY -{ - FLASH (rx) : ORIGIN = FLASH_START, LENGTH = FLASH_LENGTH - RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH - DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH - QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH - OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH - OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH - SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH - OPTION_SETTING (r): ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH - OPTION_SETTING_S (r): ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH - ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH -} - -OPTION_SETTING_START_NS = 0x0100A180; -OPTION_SETTING_START_S = 0x0100A100; - -/* Library configurations */ -GROUP(libgcc.a libc.a libm.a libnosys.a) - -/* Linker script to place sections and symbol values. Should be used together - * with other linker script that defines memory regions FLASH and RAM. - * It references following symbols, which must be defined in code: - * Reset_Handler : Entry of reset handler - * - * It defines following symbols, which code can use without definition: - * __exidx_start - * __exidx_end - * __copy_table_start__ - * __copy_table_end__ - * __zero_table_start__ - * __zero_table_end__ - * __etext - * __data_start__ - * __preinit_array_start - * __preinit_array_end - * __init_array_start - * __init_array_end - * __fini_array_start - * __fini_array_end - * __data_end__ - * __bss_start__ - * __bss_end__ - * __HeapLimit - * __StackLimit - * __StackTop - * __stack - * __Vectors_End - * __Vectors_Size - * __qspi_flash_start__ - * __qspi_flash_end__ - * __qspi_flash_code_size__ - * __qspi_region_max_size__ - * __qspi_region_start_address__ - * __qspi_region_end_address__ - * __ospi_device_0_start__ - * __ospi_device_0_end__ - * __ospi_device_0_code_size__ - * __ospi_device_0_region_max_size__ - * __ospi_device_0_region_start_address__ - * __ospi_device_0_region_end_address__ - * __ospi_device_1_start__ - * __ospi_device_1_end__ - * __ospi_device_1_code_size__ - * __ospi_device_1_region_max_size__ - * __ospi_device_1_region_start_address__ - * __ospi_device_1_region_end_address__ - */ -ENTRY(Reset_Handler) - -SECTIONS -{ - .text : - { - __tz_FLASH_S = ABSOLUTE(FLASH_START); - __ROM_Start = .; - - /* Even though the vector table is not 256 entries (1KB) long, we still allocate that much - * space because ROM registers are at address 0x400 and there is very little space - * in between. */ - KEEP(*(.fixed_vectors*)) - KEEP(*(.application_vectors*)) - __Vectors_End = .; - - /* ROM Registers start at address 0x00000400 */ - . = __ROM_Start + 0x400; - KEEP(*(.rom_registers*)) - - /* Reserving 0x100 bytes of space for ROM registers. */ - . = __ROM_Start + 0x500; - - *(.text*) - - KEEP(*(.version)) - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - *(.rodata*) - __usb_dev_descriptor_start_fs = .; - KEEP(*(.usb_device_desc_fs*)) - __usb_cfg_descriptor_start_fs = .; - KEEP(*(.usb_config_desc_fs*)) - __usb_interface_descriptor_start_fs = .; - KEEP(*(.usb_interface_desc_fs*)) - __usb_descriptor_end_fs = .; - __usb_dev_descriptor_start_hs = .; - KEEP(*(.usb_device_desc_hs*)) - __usb_cfg_descriptor_start_hs = .; - KEEP(*(.usb_config_desc_hs*)) - __usb_interface_descriptor_start_hs = .; - KEEP(*(.usb_interface_desc_hs*)) - __usb_descriptor_end_hs = .; - - KEEP(*(.eh_frame*)) - - __ROM_End = .; - } > FLASH = 0xFF - - __Vectors_Size = __Vectors_End - __Vectors; - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > FLASH - __exidx_end = .; - - /* To copy multiple ROM to RAM sections, - * uncomment .copy.table section and, - * define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */ - /* - .copy.table : - { - . = ALIGN(4); - __copy_table_start__ = .; - LONG (__etext) - LONG (__data_start__) - LONG (__data_end__ - __data_start__) - LONG (__etext2) - LONG (__data2_start__) - LONG (__data2_end__ - __data2_start__) - __copy_table_end__ = .; - } > FLASH - */ - - /* To clear multiple BSS sections, - * uncomment .zero.table section and, - * define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */ - /* - .zero.table : - { - . = ALIGN(4); - __zero_table_start__ = .; - LONG (__bss_start__) - LONG (__bss_end__ - __bss_start__) - LONG (__bss2_start__) - LONG (__bss2_end__ - __bss2_start__) - __zero_table_end__ = .; - } > FLASH - */ - - __etext = .; - - __tz_RAM_S = ORIGIN(RAM); - - /* If DTC is used, put the DTC vector table at the start of SRAM. - This avoids memory holes due to 1K alignment required by it. */ - .fsp_dtc_vector_table (NOLOAD) : - { - . = ORIGIN(RAM); - *(.fsp_dtc_vector_table) - } > RAM - - /* Initialized data section. */ - .data : - { - __data_start__ = .; - . = ALIGN(4); - - __Code_In_RAM_Start = .; - - KEEP(*(.code_in_ram*)) - __Code_In_RAM_End = .; - - *(vtable) - /* Don't use *(.data*) because it will place data meant for .data_flash in this section. */ - *(.data.*) - *(.data) - - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - KEEP(*(.jcr*)) - - . = ALIGN(4); - - /* All data end */ - __data_end__ = .; - - } > RAM AT > FLASH - - - /* TrustZone Secure Gateway Stubs Section. */ - .gnu.sgstubs : ALIGN (1024) - { - . = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024); - __tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024); - _start_sg = .; - *(.gnu.sgstubs*) - . = ALIGN(32); - _end_sg = .; - } > FLASH - - __tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(32768); - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH); - - /* QSPI_FLASH section to be downloaded via debugger */ - .qspi_flash : - { - __qspi_flash_start__ = .; - KEEP(*(.qspi_flash*)) - KEEP(*(.code_in_qspi*)) - __qspi_flash_end__ = .; - } > QSPI_FLASH - __qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__; - - /* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */ - __qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__); - .qspi_non_retentive : AT (__qspi_flash_code_addr__) - { - __qspi_non_retentive_start__ = .; - KEEP(*(.qspi_non_retentive*)) - __qspi_non_retentive_end__ = .; - } > QSPI_FLASH - __qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__; - - __qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */ - __qspi_region_start_address__ = __qspi_flash_start__; - __qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_QSPI_FLASH_N = __qspi_non_retentive_end__; - - /* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0); - - /* OSPI_DEVICE_0 section to be downloaded via debugger */ - .OSPI_DEVICE_0 : - { - __ospi_device_0_start__ = .; - KEEP(*(.ospi_device_0*)) - KEEP(*(.code_in_ospi_device_0*)) - __ospi_device_0_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__; - - /* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__) - { - __ospi_device_0_non_retentive_start__ = .; - KEEP(*(.ospi_device_0_non_retentive*)) - __ospi_device_0_non_retentive_end__ = .; - } > OSPI_DEVICE_0 - __ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__; - - __ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_0_region_start_address__ = __ospi_device_0_start__; - __ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1); - - /* OSPI_DEVICE_1 section to be downloaded via debugger */ - .OSPI_DEVICE_1 : - { - __ospi_device_1_start__ = .; - KEEP(*(.ospi_device_1*)) - KEEP(*(.code_in_ospi_device_1*)) - __ospi_device_1_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__; - - /* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */ - __ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__); - .ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__) - { - __ospi_device_1_non_retentive_start__ = .; - KEEP(*(.ospi_device_1_non_retentive*)) - __ospi_device_1_non_retentive_end__ = .; - } > OSPI_DEVICE_1 - __ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__; - - __ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */ - __ospi_device_1_region_start_address__ = __ospi_device_1_start__; - __ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__; - - /* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */ - __tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__; - - .noinit (NOLOAD): - { - . = ALIGN(4); - __noinit_start = .; - KEEP(*(.noinit*)) - . = ALIGN(8); - /* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */ - KEEP(*(.heap.*)) - __noinit_end = .; - } > RAM - - .bss : - { - . = ALIGN(4); - __bss_start__ = .; - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - } > RAM - - .heap (NOLOAD): - { - . = ALIGN(8); - __HeapBase = .; - /* Place the STD heap here. */ - KEEP(*(.heap)) - __HeapLimit = .; - } > RAM - - /* Stacks are stored in this section. */ - .stack_dummy (NOLOAD): - { - . = ALIGN(8); - __StackLimit = .; - /* Main stack */ - KEEP(*(.stack)) - __StackTop = .; - /* Thread stacks */ - KEEP(*(.stack*)) - __StackTopAll = .; - } > RAM - - PROVIDE(__stack = __StackTopAll); - - /* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used - at run time for things such as ThreadX memory pool allocations. */ - __RAM_segment_used_end__ = ALIGN(__StackTopAll , 4); - - /* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects. - * If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024); - - /* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects. - * RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not - * specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary. - * In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */ - __tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192); - - /* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects. - * The EDMAC is a non-secure bus master and can only access non-secure RAM. */ - .ns_buffer (NOLOAD): - { - /* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */ - . = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .; - - KEEP(*(.ns_buffer*)) - } > RAM - - /* Data flash. */ - .data_flash : - { - . = ORIGIN(DATA_FLASH); - __tz_DATA_FLASH_S = .; - __Data_Flash_Start = .; - KEEP(*(.data_flash*)) - __Data_Flash_End = .; - - __tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024); - } > DATA_FLASH - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_S = ORIGIN(SDRAM); - - /* SDRAM */ - .sdram (NOLOAD): - { - __SDRAM_Start = .; - KEEP(*(.sdram*)) - KEEP(*(.frame*)) - __SDRAM_End = .; - } > SDRAM - - /* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */ - __tz_SDRAM_N = __SDRAM_End; - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_S = ORIGIN(ID_CODE); - - .id_code : - { - __ID_Code_Start = .; - KEEP(*(.id_code*)) - __ID_Code_End = .; - } > ID_CODE - - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_N = __ID_Code_End; - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING); - - .option_setting : - { - __OPTION_SETTING_Start = .; - KEEP(*(.option_setting_ofs0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x10 : __OPTION_SETTING_Start; - KEEP(*(.option_setting_dualsel)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x34 : __OPTION_SETTING_Start; - KEEP(*(.option_setting_sas)) - __OPTION_SETTING_End = .; - } > OPTION_SETTING = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_N = OPTION_SETTING_START_NS; - - .option_setting_ns : - { - __OPTION_SETTING_NS_Start = .; - KEEP(*(.option_setting_ofs1)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_banksel)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps0)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps1)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_bps2)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps0)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps1)) - . = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start; - KEEP(*(.option_setting_pbps2)) - __OPTION_SETTING_NS_End = .; - } > OPTION_SETTING = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S); - - .option_setting_s : - { - __OPTION_SETTING_S_Start = .; - KEEP(*(.option_setting_ofs1_sec)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sec)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec1)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sec2)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec1)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_pbps_sec2)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_ofs1_sel)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_banksel_sel)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel0)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel1)) - . = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start; - KEEP(*(.option_setting_bps_sel2)) - __OPTION_SETTING_S_End = .; - } > OPTION_SETTING_S = 0xFF - - /* Symbol required for RA Configuration tool. */ - __tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End; -} diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.cmake b/hw/bsp/ra/boards/ra6m1_ek/board.cmake new file mode 100644 index 000000000..b2f41a354 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/board.cmake @@ -0,0 +1,10 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra6m1) + +set(JLINK_DEVICE R7FA6M1AD) + +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC) +# target_sources(${TARGET} PRIVATE) +# target_include_directories(${BOARD_TARGET} PUBLIC) +endfunction() diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.h b/hw/bsp/ra/boards/ra6m1_ek/board.h new file mode 100644 index 000000000..f73a08fc0 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/board.h @@ -0,0 +1,51 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_01_PIN_12 +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_04_PIN_15 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT }, + { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, + // USB FS + { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS }, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra6m1_ek/board.mk b/hw/bsp/ra/boards/ra6m1_ek/board.mk new file mode 100644 index 000000000..f06b693d8 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/board.mk @@ -0,0 +1,7 @@ +CPU_CORE = cortex-m4 +MCU_VARIANT = ra6m1 + +# For flash-jlink target +JLINK_DEVICE = R7FA6M1AD + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..772e5e5b1 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,68 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (2) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) +#else + #define BSP_CFG_RTOS (0) +#endif +#endif + +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif + +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) +#endif + +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x1000) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..bd6a901c3 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (6) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..40bb3a3bf --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M1AD3CFP +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (524288) +#define BSP_RAM_SIZE_BYTES (262144) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (100) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..5fedd754f --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,84 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra6m1/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA6M1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0xFFFFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0xFFFFFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0xFFFFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0xFFFFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) +#else + /* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ + #define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) + #define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..945a6010b --- /dev/null +++ b/hw/bsp/ra/boards/ra6m1_ek/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,23 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (12000000) /* XTAL 12000000Hz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_1) /* PLL Div /1 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(20U,0U) /* PLL Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* ICLK Div /2 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.cmake b/hw/bsp/ra/boards/ra6m5_ek/board.cmake new file mode 100644 index 000000000..c91d48a32 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/board.cmake @@ -0,0 +1,22 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m33 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra6m5) + +set(JLINK_DEVICE R7FA6M5BH) + +# Device port default to PORT1 Highspeed +if (NOT DEFINED PORT) +set(PORT 1) +endif() + +# Host port will be the other port +set(HOST_PORT $<NOT:${PORT}>) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + BOARD_TUD_RHPORT=${PORT} + BOARD_TUH_RHPORT=${HOST_PORT} + # port 0 is fullspeed, port 1 is highspeed + BOARD_TUD_MAX_SPEED=$<IF:${PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> + BOARD_TUH_MAX_SPEED=$<IF:${HOST_PORT},OPT_MODE_HIGH_SPEED,OPT_MODE_FULL_SPEED> + ) +endfunction() diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.h b/hw/bsp/ra/boards/ra6m5_ek/board.h new file mode 100644 index 000000000..779f71810 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/board.h @@ -0,0 +1,68 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_00_PIN_08 +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_00_PIN_05 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + { .pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT | IOPORT_CFG_PORT_OUTPUT_LOW }, + { .pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT }, + + // USB FS + { .pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH }, + { .pin = BSP_IO_PORT_05_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, + { .pin = BSP_IO_PORT_05_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS | IOPORT_CFG_DRIVE_HIGH}, + + // USB HS + { .pin = BSP_IO_PORT_07_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS }, + { .pin = BSP_IO_PORT_11_PIN_00, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, + { .pin = BSP_IO_PORT_11_PIN_01, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_HS | IOPORT_CFG_DRIVE_HIGH}, + + // ETM Trace + #ifdef TRACE_ETM + { .pin = BSP_IO_PORT_02_PIN_08, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_09, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_10, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_11, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + { .pin = BSP_IO_PORT_02_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_TRACE | IOPORT_CFG_DRIVE_HS_HIGH }, + #endif +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/ra6m5_ek/board.mk b/hw/bsp/ra/boards/ra6m5_ek/board.mk new file mode 100644 index 000000000..a5c933764 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/board.mk @@ -0,0 +1,10 @@ +CPU_CORE = cortex-m33 +MCU_VARIANT = ra6m5 + +# For flash-jlink target +JLINK_DEVICE = R7FA6M5BH + +# Port 1 is highspeed +PORT ?= 1 + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h new file mode 100644 index 000000000..33d381850 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_cfg.h @@ -0,0 +1,63 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CFG_H_ +#define BSP_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_clock_cfg.h" +#include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" + +#define RA_NOT_DEFINED 0 +#ifndef BSP_CFG_RTOS +#if (RA_NOT_DEFINED) != (2) +#define BSP_CFG_RTOS (2) +#elif (RA_NOT_DEFINED) != (RA_NOT_DEFINED) + #define BSP_CFG_RTOS (1) +#else + #define BSP_CFG_RTOS (0) +#endif +#endif +#ifndef BSP_CFG_RTC_USED +#define BSP_CFG_RTC_USED (RA_NOT_DEFINED) +#endif +#undef RA_NOT_DEFINED +#if defined(_RA_BOOT_IMAGE) + #define BSP_CFG_BOOT_IMAGE (1) +#endif +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x1000) +#define BSP_CFG_HEAP_BYTES (0x1000) +#define BSP_CFG_PARAM_CHECKING_ENABLE (1) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) + +#define BSP_CFG_PFS_PROTECT ((1)) + +#define BSP_CFG_C_RUNTIME_INIT ((1)) +#define BSP_CFG_EARLY_INIT ((0)) + +#define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_POPULATED +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#endif + +#ifndef BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE +#define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_DRIVE +#define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_POPULATED +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#endif +#ifndef BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS +#define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..bd6a901c3 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (6) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..6845183db --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA6M5BH3CFC +#define BSP_MCU_FEATURE_SET ('B') +#define BSP_ROM_SIZE_BYTES (2097152) +#define BSP_RAM_SIZE_BYTES (524288) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_LQFP +#define BSP_PACKAGE_PINS (176) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..d5428540f --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,387 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "../../../ra/fsp/src/bsp/mcu/ra6m5/bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA6M5 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 +#define BSP_HOCO_HZ (16000000) +#elif BSP_CFG_HOCO_FREQUENCY == 1 + #define BSP_HOCO_HZ (18000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (20000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif + +#define BSP_CFG_FLL_ENABLE (0) + +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (112U) + +#if defined(_RA_TZ_SECURE) + #define BSP_TZ_SECURE_BUILD (1) + #define BSP_TZ_NONSECURE_BUILD (0) + #elif defined(_RA_TZ_NONSECURE) + #define BSP_TZ_SECURE_BUILD (0) + #define BSP_TZ_NONSECURE_BUILD (1) + #else +#define BSP_TZ_SECURE_BUILD (0) +#define BSP_TZ_NONSECURE_BUILD (0) +#endif + +/* TrustZone Settings */ +#define BSP_TZ_CFG_INIT_SECURE_ONLY (BSP_CFG_CLOCKS_SECURE || (!BSP_CFG_CLOCKS_OVERRIDE)) +#define BSP_TZ_CFG_SKIP_INIT (BSP_TZ_NONSECURE_BUILD && BSP_TZ_CFG_INIT_SECURE_ONLY) +#define BSP_TZ_CFG_EXCEPTION_RESPONSE (0) + +/* CMSIS TrustZone Settings */ +#define SCB_CSR_AIRCR_INIT (1) +#define SCB_AIRCR_BFHFNMINS_VAL (0) +#define SCB_AIRCR_SYSRESETREQS_VAL (1) +#define SCB_AIRCR_PRIS_VAL (0) +#define TZ_FPU_NS_USAGE (1) +#ifndef SCB_NSACR_CP10_11_VAL +#define SCB_NSACR_CP10_11_VAL (3U) +#endif + +#ifndef FPU_FPCCR_TS_VAL +#define FPU_FPCCR_TS_VAL (1U) +#endif +#define FPU_FPCCR_CLRONRETS_VAL (1) + +#ifndef FPU_FPCCR_CLRONRET_VAL +#define FPU_FPCCR_CLRONRET_VAL (1) +#endif + +/* The C-Cache line size that is configured during startup. */ +#ifndef BSP_CFG_C_CACHE_LINE_SIZE +#define BSP_CFG_C_CACHE_LINE_SIZE (1U) +#endif + +/* Type 1 Peripheral Security Attribution */ + +/* Peripheral Security Attribution Register (PSAR) Settings */ +#ifndef BSP_TZ_CFG_PSARB +#define BSP_TZ_CFG_PSARB (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CAN1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* CAN0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* IIC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9) /* IIC0 */ | \ + (((1 > 0) ? 0U : 1U) << 11) /* USBFS */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 18) /* SPI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 19) /* SPI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* SCI9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* SCI8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* SCI7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* SCI6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* SCI5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* SCI4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* SCI3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* SCI2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* SCI1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCI0 */ | \ + 0x33f4f9) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARC +#define BSP_TZ_CFG_PSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* CAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* CRC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* CTSU */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8) /* SSIE0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* SDHI0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* DOC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* SCE9 */ | \ + 0x7fffcef4) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARD +#define BSP_TZ_CFG_PSARD (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* AGT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* AGT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* AGT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3) /* AGT0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11) /* POEG3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12) /* POEG2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13) /* POEG1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* POEG0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* ADC1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 16) /* ADC0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 20) /* DAC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* TSN */ | \ + 0xffae07f0) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_PSARE +#define BSP_TZ_CFG_PSARE (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* WDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* IWDT */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2) /* RTC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14) /* AGT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15) /* AGT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 22) /* GPT9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 23) /* GPT8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 24) /* GPT7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 25) /* GPT6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 26) /* GPT5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 27) /* GPT4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 28) /* GPT3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 29) /* GPT2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 30) /* GPT1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 31) /* GPT0 */ | \ + 0x3f3ff8) /* Unused */ +#endif +#ifndef BSP_TZ_CFG_MSSAR +#define BSP_TZ_CFG_MSSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) /* ELC */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) /* DTC_DMAC */ | \ + 0xfffffffc) /* Unused */ +#endif + +/* Type 2 Peripheral Security Attribution */ + +/* Security attribution for Cache registers. */ +#ifndef BSP_TZ_CFG_CSAR +#define BSP_TZ_CFG_CSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for RSTSRn registers. */ +#ifndef BSP_TZ_CFG_RSTSAR +#define BSP_TZ_CFG_RSTSAR (0xFFFFFFFFU) +#endif + +/* Security attribution for registers of LVD channels. */ +#ifndef BSP_TZ_CFG_LVDSAR +#define BSP_TZ_CFG_LVDSAR (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0) | /* LVD Channel 1 */ \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1) | /* LVD Channel 2 */ \ + 0xFFFFFFFCU) +#endif + +/* Security attribution for LPM registers. */ +#ifndef BSP_TZ_CFG_LPMSAR +#define BSP_TZ_CFG_LPMSAR ((RA_NOT_DEFINED > 0) ? 0xFFFFFCEAU : 0xFFFFFFFFU) +#endif +/* Deep Standby Interrupt Factor Security Attribution Register. */ +#ifndef BSP_TZ_CFG_DPFSAR +#define BSP_TZ_CFG_DPFSAR ((RA_NOT_DEFINED > 0) ? 0xF2E00000U : 0xFFFFFFFFU) +#endif + +/* Security attribution for CGC registers. */ +#ifndef BSP_TZ_CFG_CGFSAR +#if BSP_CFG_CLOCKS_SECURE +/* Protect all CGC registers from Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFCE402U) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_CGFSAR (0xFFFFFFFFU) +#endif +#endif + +/* Security attribution for Battery Backup registers. */ +#ifndef BSP_TZ_CFG_BBFSAR +#define BSP_TZ_CFG_BBFSAR (0x00FFFFFF) +#endif + +/* Security attribution for registers for IRQ channels. */ +#ifndef BSP_TZ_CFG_ICUSARA +#define BSP_TZ_CFG_ICUSARA (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* External IRQ0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* External IRQ1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* External IRQ2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* External IRQ3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* External IRQ4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* External IRQ5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* External IRQ6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* External IRQ7 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 8U) /* External IRQ8 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 9U) /* External IRQ9 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 10U) /* External IRQ10 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 11U) /* External IRQ11 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 12U) /* External IRQ12 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 13U) /* External IRQ13 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 14U) /* External IRQ14 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 15U) /* External IRQ15 */ | \ + 0xFFFF0000U) +#endif + +/* Security attribution for NMI registers. */ +#ifndef BSP_TZ_CFG_ICUSARB +#define BSP_TZ_CFG_ICUSARB (0 | 0xFFFFFFFEU) /* Should match AIRCR.BFHFNMINS. */ +#endif + +/* Security attribution for registers for DMAC channels */ +#ifndef BSP_TZ_CFG_ICUSARC +#define BSP_TZ_CFG_ICUSARC (\ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 0U) /* DMAC Channel 0 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 1U) /* DMAC Channel 1 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 2U) /* DMAC Channel 2 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 3U) /* DMAC Channel 3 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 4U) /* DMAC Channel 4 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 5U) /* DMAC Channel 5 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 6U) /* DMAC Channel 6 */ | \ + (((RA_NOT_DEFINED > 0) ? 0U : 1U) << 7U) /* DMAC Channel 7 */ | \ + 0xFFFFFF00U) +#endif + +/* Security attribution registers for SELSR0. */ +#ifndef BSP_TZ_CFG_ICUSARD +#define BSP_TZ_CFG_ICUSARD ((RA_NOT_DEFINED > 0) ? 0xFFFFFFFEU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN0. */ +#ifndef BSP_TZ_CFG_ICUSARE +#define BSP_TZ_CFG_ICUSARE ((RA_NOT_DEFINED > 0) ? 0x04F2FFFFU : 0xFFFFFFFFU) +#endif + +/* Security attribution registers for WUPEN1. */ +#ifndef BSP_TZ_CFG_ICUSARF +#define BSP_TZ_CFG_ICUSARF ((RA_NOT_DEFINED > 0) ? 0xFFFFFFF8U : 0xFFFFFFFFU) +#endif + +/* Set DTCSTSAR if the Secure program uses the DTC. */ +#if RA_NOT_DEFINED == RA_NOT_DEFINED +#define BSP_TZ_CFG_DTC_USED (0U) +#else + #define BSP_TZ_CFG_DTC_USED (1U) +#endif + +/* Security attribution of FLWT and FCKMHZ registers. */ +#ifndef BSP_TZ_CFG_FSAR +/* If the CGC registers are only accessible in Secure mode, than there is no + * reason for nonsecure applications to access FLWT and FCKMHZ. */ +#if BSP_CFG_CLOCKS_SECURE +/* Protect FLWT and FCKMHZ registers from nonsecure write access. */ +#define BSP_TZ_CFG_FSAR (0xFEFEU) +#else +/* Allow Secure and Non-secure write access. */ +#define BSP_TZ_CFG_FSAR (0xFFFFU) +#endif +#endif + +/* Security attribution for SRAM registers. */ +#ifndef BSP_TZ_CFG_SRAMSAR +/* If the CGC registers are only accessible in Secure mode, than there is no reason for Non Secure applications to access + * SRAM0WTEN and therefore there is no reason to access PRCR2. */ +#define BSP_TZ_CFG_SRAMSAR (\ + 1 | \ + ((BSP_CFG_CLOCKS_SECURE == 0) ? (1U << 1U) : 0U) | \ + 4 | \ + 0xFFFFFFF8U) +#endif + +/* Security attribution for Standby RAM registers. */ +#ifndef BSP_TZ_CFG_STBRAMSAR +#define BSP_TZ_CFG_STBRAMSAR (0 | 0xFFFFFFF0U) +#endif + +/* Security attribution for the DMAC Bus Master MPU settings. */ +#ifndef BSP_TZ_CFG_MMPUSARA +/* The DMAC Bus Master MPU settings should align with the DMAC channel settings. */ +#define BSP_TZ_CFG_MMPUSARA (BSP_TZ_CFG_ICUSARC) +#endif + +/* Security Attribution Register A for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARA +#define BSP_TZ_CFG_BUSSARA (0xFFFFFFFFU) +#endif +/* Security Attribution Register B for BUS Control registers. */ +#ifndef BSP_TZ_CFG_BUSSARB +#define BSP_TZ_CFG_BUSSARB (0xFFFFFFFFU) +#endif + +/* Enable Uninitialized Non-Secure Application Fallback. */ +#ifndef BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK +#define BSP_TZ_CFG_NON_SECURE_APPLICATION_FALLBACK (1U) +#endif + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) + +/* Option Function Select Register 1 Security Attribution */ +#ifndef BSP_CFG_ROM_REG_OFS1_SEL +#if defined(_RA_TZ_SECURE) || defined(_RA_TZ_NONSECURE) + #define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U | ((BSP_CFG_CLOCKS_SECURE == 0) ? 0x700U : 0U) | ((RA_NOT_DEFINED > 0) ? 0U : 0x7U)) +#else +#define BSP_CFG_ROM_REG_OFS1_SEL (0xFFFFF8F8U) +#endif +#endif + +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEF8 | (1 << 2) | (3) | (1 << 8)) + +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* Dual Mode Select Register */ +#ifndef BSP_CFG_ROM_REG_DUALSEL +#define BSP_CFG_ROM_REG_DUALSEL (0xFFFFFFF8U | (0x7U)) +#endif + +/* Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_BPS0 +#define BSP_CFG_ROM_REG_BPS0 (~( 0U)) +#endif +/* Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_BPS1 +#define BSP_CFG_ROM_REG_BPS1 (~( 0U)) +#endif +/* Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_BPS2 +#define BSP_CFG_ROM_REG_BPS2 (~( 0U)) +#endif +/* Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_BPS3 +#define BSP_CFG_ROM_REG_BPS3 (0xFFFFFFFFU) +#endif +/* Permanent Block Protection Register 0 */ +#ifndef BSP_CFG_ROM_REG_PBPS0 +#define BSP_CFG_ROM_REG_PBPS0 (~( 0U)) +#endif +/* Permanent Block Protection Register 1 */ +#ifndef BSP_CFG_ROM_REG_PBPS1 +#define BSP_CFG_ROM_REG_PBPS1 (~( 0U)) +#endif +/* Permanent Block Protection Register 2 */ +#ifndef BSP_CFG_ROM_REG_PBPS2 +#define BSP_CFG_ROM_REG_PBPS2 (~( 0U)) +#endif +/* Permanent Block Protection Register 3 */ +#ifndef BSP_CFG_ROM_REG_PBPS3 +#define BSP_CFG_ROM_REG_PBPS3 (0xFFFFFFFFU) +#endif +/* Security Attribution for Block Protection Register 0 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL0 +#define BSP_CFG_ROM_REG_BPS_SEL0 (BSP_CFG_ROM_REG_BPS0 & BSP_CFG_ROM_REG_PBPS0) +#endif +/* Security Attribution for Block Protection Register 1 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL1 +#define BSP_CFG_ROM_REG_BPS_SEL1 (BSP_CFG_ROM_REG_BPS1 & BSP_CFG_ROM_REG_PBPS1) +#endif +/* Security Attribution for Block Protection Register 2 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL2 +#define BSP_CFG_ROM_REG_BPS_SEL2 (BSP_CFG_ROM_REG_BPS2 & BSP_CFG_ROM_REG_PBPS2) +#endif +/* Security Attribution for Block Protection Register 3 (If any blocks are marked as protected in the secure application, then mark them as secure) */ +#ifndef BSP_CFG_ROM_REG_BPS_SEL3 +#define BSP_CFG_ROM_REG_BPS_SEL3 (BSP_CFG_ROM_REG_BPS3 & BSP_CFG_ROM_REG_PBPS3) +#endif +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif + +#ifdef __cplusplus +} +#endif +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..0eb5e0516 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,37 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ + +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (24000000) /* XTAL 24000000Hz */ +#define BSP_CFG_HOCO_FREQUENCY (2) /* HOCO 20MHz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL Src: XTAL */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_3) /* PLL Div /3 */ +#define BSP_CFG_PLL_MUL (BSP_CLOCKS_PLL_MUL(25U,0U)) /* PLL Mul x25.0 */ +#define BSP_CFG_PLL2_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_MAIN_OSC) /* PLL2 Src: XTAL */ +#define BSP_CFG_PLL2_DIV (BSP_CLOCKS_PLL_DIV_2) /* PLL2 Div /2 */ +#define BSP_CFG_PLL2_MUL (BSP_CLOCKS_PLL_MUL(20U,0U)) /* PLL2 Mul x20.0 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL) /* Clock Src: PLL */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Disabled */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* UCLK Src: PLL2 */ +#define BSP_CFG_U60CK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_PLL2) /* U60CK Src: PLL2 */ +#define BSP_CFG_OCTA_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* OCTASPICLK Disabled */ +#define BSP_CFG_CANFDCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CANFDCLK Disabled */ +#define BSP_CFG_CECCLK_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CECCLK Disabled */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKA Div /2 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKB Div /4 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* PCLKC Div /4 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKD Div /2 */ +#define BSP_CFG_BCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* BCLK Div /2 */ +#define BSP_CFG_BCLK_OUTPUT (2) /* EBCLK Div /2 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_4) /* FCLK Div /4 */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_DIV (BSP_CLOCKS_USB_CLOCK_DIV_5) /* UCLK Div /5 */ +#define BSP_CFG_U60CK_DIV (BSP_CLOCKS_USB60_CLOCK_DIV_4) /* U60CK Div /4 */ +#define BSP_CFG_OCTA_DIV (BSP_CLOCKS_OCTA_CLOCK_DIV_1) /* OCTASPICLK Div /1 */ +#define BSP_CFG_CANFDCLK_DIV (BSP_CLOCKS_CANFD_CLOCK_DIV_1) /* CANFDCLK Div /1 */ +#define BSP_CFG_CECCLK_DIV (BSP_CLOCKS_CEC_CLOCK_DIV_1) /* CECCLK Div /1 */ + +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug new file mode 100644 index 000000000..7b8ee9c95 --- /dev/null +++ b/hw/bsp/ra/boards/ra6m5_ek/ozone/ra6m5.jdebug @@ -0,0 +1,106 @@ + +/********************************************************************* +* +* OnProjectLoad +* +* Function description +* Project load routine. Required. +* +********************************************************************** +*/ +void OnProjectLoad (void) { + Project.AddSvdFile ("Cortex-M33.svd"); + Project.AddSvdFile ("./R7FA6M5BH.svd"); + + Project.SetDevice ("R7FA6M5BH"); + Project.SetHostIF ("USB", ""); + Project.SetTargetIF ("SWD"); + Project.SetTIFSpeed ("50 MHz"); + + Project.SetTraceSource ("Trace Pins"); + Project.SetTracePortWidth (4); + + //File.Open ("../../../../../../examples/device/cdc_msc/cmake-build-ra6m5/cdc_msc.elf"); + //File.Open ("../../../../../../examples/dual/cmake-build-ra6m5/host_hid_to_device_cdc/host_hid_to_device_cdc.elf"); + File.Open ("../../../../../../examples/cmake-build-ra6m5/host/cdc_msc_hid/cdc_msc_hid.elf"); +} +/********************************************************************* +* +* BeforeTargetConnect +* +********************************************************************** +*/ +void BeforeTargetConnect (void) { + // Trace pin init is done by J-Link script file as J-Link script files are IDE independent + Project.SetJLinkScript("../../../debug.jlinkscript"); +} + +/********************************************************************* +* +* AfterTargetReset +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetReset (void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + + if (VectorTableAddr != 0xFFFFFFFF) { + SP = Target.ReadU32(VectorTableAddr); + Target.SetReg("SP", SP); + } else { + Util.Log("Project file error: failed to get program base"); + } + + PC = Elf.GetEntryPointPC(); + + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else if (VectorTableAddr != 0xFFFFFFFF) { + PC = Target.ReadU32(VectorTableAddr + 4); + Target.SetReg("PC", PC); + } +} + +/********************************************************************* +* +* AfterTargetDownload +* +* Function description +* Event handler routine. +* - Sets the PC register to program reset value. +* - Sets the SP register to program reset value on Cortex-M. +* +********************************************************************** +*/ +void AfterTargetDownload (void) { + unsigned int SP; + unsigned int PC; + unsigned int VectorTableAddr; + + VectorTableAddr = Elf.GetBaseAddr(); + + if (VectorTableAddr != 0xFFFFFFFF) { + SP = Target.ReadU32(VectorTableAddr); + Target.SetReg("SP", SP); + } else { + Util.Log("Project file error: failed to get program base"); + } + + PC = Elf.GetEntryPointPC(); + + if (PC != 0xFFFFFFFF) { + Target.SetReg("PC", PC); + } else if (VectorTableAddr != 0xFFFFFFFF) { + PC = Target.ReadU32(VectorTableAddr + 4); + Target.SetReg("PC", PC); + } +} diff --git a/hw/bsp/ra/boards/uno_r4/board.cmake b/hw/bsp/ra/boards/uno_r4/board.cmake new file mode 100644 index 000000000..9d59bc4f7 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/board.cmake @@ -0,0 +1,13 @@ +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(MCU_VARIANT ra4m1) + +set(JLINK_DEVICE R7FA4M1AB) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + CFG_EXAMPLE_VIDEO_READONLY + ) +# target_sources(${TARGET} PRIVATE) +# target_include_directories(${BOARD_TARGET} PUBLIC) +endfunction() diff --git a/hw/bsp/ra/boards/uno_r4/board.h b/hw/bsp/ra/boards/uno_r4/board.h new file mode 100644 index 000000000..72abda27f --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/board.h @@ -0,0 +1,53 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED1 BSP_IO_PORT_01_PIN_11 // D13 +#define LED_STATE_ON 1 + +#define SW1 BSP_IO_PORT_01_PIN_10 // D12 +#define BUTTON_STATE_ACTIVE 0 + +static const ioport_pin_cfg_t board_pin_cfg[] = { + {.pin = LED1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_OUTPUT}, + {.pin = SW1, .pin_cfg = IOPORT_CFG_PORT_DIRECTION_INPUT}, + // USB FS D+, D-, VBus + {.pin = BSP_IO_PORT_04_PIN_07, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_14, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, + {.pin = BSP_IO_PORT_09_PIN_15, .pin_cfg = IOPORT_CFG_PERIPHERAL_PIN | IOPORT_PERIPHERAL_USB_FS}, +}; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/hw/bsp/ra/boards/uno_r4/board.mk b/hw/bsp/ra/boards/uno_r4/board.mk new file mode 100644 index 000000000..b7075eec0 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/board.mk @@ -0,0 +1,9 @@ +CPU_CORE = cortex-m4 +MCU_VARIANT = ra4m1 + +LD_FILE = ${BOARD_PATH}/${BOARD}.ld + +# For flash-jlink target +JLINK_DEVICE = R7FA4M1AB + +flash: flash-jlink diff --git a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h index a84d81e8d..c1d1022cc 100755..100644 --- a/hw/bsp/ra/boards/ra4m3_ek/fsp_cfg/bsp_cfg.h +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_cfg.h @@ -2,21 +2,21 @@ #ifndef BSP_CFG_H_ #define BSP_CFG_H_ -#include "board.h" #include "bsp_clock_cfg.h" #include "bsp_mcu_family_cfg.h" +#include "board_cfg.h" #undef RA_NOT_DEFINED #define BSP_CFG_RTOS (0) #if defined(_RA_BOOT_IMAGE) #define BSP_CFG_BOOT_IMAGE (1) #endif -#define BSP_CFG_MCU_VCC_MV (3300) -#define BSP_CFG_STACK_MAIN_BYTES (0x400) -#define BSP_CFG_HEAP_BYTES (0x400) +#define BSP_CFG_MCU_VCC_MV (3300) +#define BSP_CFG_STACK_MAIN_BYTES (0x800) +#define BSP_CFG_HEAP_BYTES (0x1000) #define BSP_CFG_PARAM_CHECKING_ENABLE (1) -#define BSP_CFG_ASSERT (0) -#define BSP_CFG_ERROR_LOG (0) +#define BSP_CFG_ASSERT (0) +#define BSP_CFG_ERROR_LOG (0) #define BSP_CFG_PFS_PROTECT ((1)) @@ -25,11 +25,11 @@ #define BSP_CFG_STARTUP_CLOCK_REG_NOT_RESET ((0)) -#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (1) +#define BSP_CLOCK_CFG_MAIN_OSC_POPULATED (0) #define BSP_CLOCK_CFG_MAIN_OSC_CLOCK_SOURCE (0) #define BSP_CLOCK_CFG_SUBCLOCK_DRIVE (0) -#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (1) +#define BSP_CLOCK_CFG_SUBCLOCK_POPULATED (0) #define BSP_CLOCK_CFG_SUBCLOCK_STABILIZATION_MS 1000 #endif /* BSP_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h new file mode 100644 index 000000000..444d32e56 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_cfg.h @@ -0,0 +1,5 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_CFG_H_ +#define BSP_MCU_DEVICE_CFG_H_ +#define BSP_CFG_MCU_PART_SERIES (4) +#endif /* BSP_MCU_DEVICE_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h new file mode 100644 index 000000000..336918800 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_device_pn_cfg.h @@ -0,0 +1,11 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_DEVICE_PN_CFG_H_ +#define BSP_MCU_R7FA4M1AB3CNE +#define BSP_MCU_FEATURE_SET ('A') +#define BSP_ROM_SIZE_BYTES (262144) +#define BSP_RAM_SIZE_BYTES (32768) +#define BSP_DATA_FLASH_SIZE_BYTES (8192) +#define BSP_PACKAGE_QFN +#define BSP_PACKAGE_PINS (48) +#endif /* BSP_MCU_DEVICE_PN_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h new file mode 100644 index 000000000..fc604eb3b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp/bsp_mcu_family_cfg.h @@ -0,0 +1,87 @@ +/* generated configuration header file through renesas e2 studio */ +#ifndef BSP_MCU_FAMILY_CFG_H_ +#define BSP_MCU_FAMILY_CFG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "bsp_mcu_device_pn_cfg.h" +#include "bsp_mcu_device_cfg.h" +#include "bsp_mcu_info.h" +#include "bsp_clock_cfg.h" + +#define BSP_MCU_GROUP_RA4M1 (1) +#define BSP_LOCO_HZ (32768) +#define BSP_MOCO_HZ (8000000) +#define BSP_SUB_CLOCK_HZ (32768) +#if BSP_CFG_HOCO_FREQUENCY == 0 + #define BSP_HOCO_HZ (24000000) +#elif BSP_CFG_HOCO_FREQUENCY == 2 + #define BSP_HOCO_HZ (32000000) +#elif BSP_CFG_HOCO_FREQUENCY == 4 + #define BSP_HOCO_HZ (48000000) +#elif BSP_CFG_HOCO_FREQUENCY == 5 + #define BSP_HOCO_HZ (64000000) +#else + #error "Invalid HOCO frequency chosen (BSP_CFG_HOCO_FREQUENCY) in bsp_clock_cfg.h" +#endif +#define BSP_CORTEX_VECTOR_TABLE_ENTRIES (16U) +#define BSP_VECTOR_TABLE_MAX_ENTRIES (48U) +#define BSP_MCU_VBATT_SUPPORT (1) + +#define OFS_SEQ1 0xA001A001 | (1 << 1) | (3 << 2) +#define OFS_SEQ2 (15 << 4) | (3 << 8) | (3 << 10) +#define OFS_SEQ3 (1 << 12) | (1 << 14) | (1 << 17) +#define OFS_SEQ4 (3 << 18) |(15 << 20) | (3 << 24) | (3 << 26) +#define OFS_SEQ5 (1 << 28) | (1 << 30) +#define BSP_CFG_ROM_REG_OFS0 (OFS_SEQ1 | OFS_SEQ2 | OFS_SEQ3 | OFS_SEQ4 | OFS_SEQ5) +#define BSP_CFG_ROM_REG_OFS1 (0xFFFFFEC3 | (1 << 2) | (3 << 3) | (0 << 8)) +#define BSP_CFG_USE_LOW_VOLTAGE_MODE ((0)) +#define BSP_CFG_ROM_REG_MPU_PC0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_PC1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_PC1_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_PC1_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION0_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION0_START (0x00FFFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION0_END (0x00FFFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION1_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION1_START (0x200FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION1_END (0x200FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION2_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION2_START (0x407FFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION2_END (0x407FFFFF) +#define BSP_CFG_ROM_REG_MPU_REGION3_ENABLE (1) +#define BSP_CFG_ROM_REG_MPU_REGION3_START (0x400DFFFC) +#define BSP_CFG_ROM_REG_MPU_REGION3_END (0x400DFFFF) +#ifndef BSP_CLOCK_CFG_MAIN_OSC_WAIT +#define BSP_CLOCK_CFG_MAIN_OSC_WAIT (9) +#endif +/* Used to create IELS values for the interrupt initialization table g_interrupt_event_link_select. */ +#define BSP_PRV_IELS_ENUM(vector) (ELC_ ## vector) + +/* + ID Code + Note: To permanently lock and disable the debug interface define the BSP_ID_CODE_PERMANENTLY_LOCKED in the compiler settings. + WARNING: This will disable debug access to the part and cannot be reversed by a debug probe. + */ +#if defined(BSP_ID_CODE_PERMANENTLY_LOCKED) + #define BSP_CFG_ID_CODE_LONG_1 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_2 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_3 (0x00000000) + #define BSP_CFG_ID_CODE_LONG_4 (0x00000000) + #else +/* ID CODE: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF */ +#define BSP_CFG_ID_CODE_LONG_1 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_2 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_3 (0xFFFFFFFF) +#define BSP_CFG_ID_CODE_LONG_4 (0xffFFFFFF) +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* BSP_MCU_FAMILY_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h new file mode 100644 index 000000000..63618ec4b --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/fsp_cfg/bsp_clock_cfg.h @@ -0,0 +1,21 @@ +/* generated configuration header file - do not edit */ +#ifndef BSP_CLOCK_CFG_H_ +#define BSP_CLOCK_CFG_H_ +#define BSP_CFG_CLOCKS_SECURE (0) +#define BSP_CFG_CLOCKS_OVERRIDE (0) +#define BSP_CFG_XTAL_HZ (0) /* XTAL 0Hz */ +#define BSP_CFG_PLL_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* PLL Src: XTAL */ +#define BSP_CFG_HOCO_FREQUENCY (4) /* HOCO 48MHz */ +#define BSP_CFG_PLL_DIV (BSP_CLOCKS_PLL_DIV_4) /* PLL Div /4 */ +#define BSP_CFG_PLL_MUL BSP_CLOCKS_PLL_MUL(12, 0) /* PLL Mul x12 */ +#define BSP_CFG_CLOCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* Clock Src: HOCO */ +#define BSP_CFG_ICLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* ICLK Div /1 */ +#define BSP_CFG_PCLKA_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKA Div /1 */ +#define BSP_CFG_PCLKB_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* PCLKB Div /2 */ +#define BSP_CFG_PCLKC_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKC Div /1 */ +#define BSP_CFG_PCLKD_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* PCLKD Div /1 */ +#define BSP_CFG_FCLK_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_2) /* FCLK Div /2 */ +#define BSP_CFG_CLKOUT_SOURCE (BSP_CLOCKS_CLOCK_DISABLED) /* CLKOUT Src: SUBCLK */ +#define BSP_CFG_CLKOUT_DIV (BSP_CLOCKS_SYS_CLOCK_DIV_1) /* CLKOUT Div /1 */ +#define BSP_CFG_UCK_SOURCE (BSP_CLOCKS_SOURCE_CLOCK_HOCO) /* UCLK Src: HOCO */ +#endif /* BSP_CLOCK_CFG_H_ */ diff --git a/hw/bsp/ra/boards/uno_r4/uno_r4.ld b/hw/bsp/ra/boards/uno_r4/uno_r4.ld new file mode 100644 index 000000000..45f11dfb1 --- /dev/null +++ b/hw/bsp/ra/boards/uno_r4/uno_r4.ld @@ -0,0 +1,25 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x8000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x40000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x01010018; +ID_CODE_LENGTH = 0x20; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x0; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +/* Uno R4 has bootloader */ +FLASH_IMAGE_START = 0x4000; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/debug.jlinkscript b/hw/bsp/ra/debug.jlinkscript new file mode 100644 index 000000000..b34cfaa7f --- /dev/null +++ b/hw/bsp/ra/debug.jlinkscript @@ -0,0 +1,4 @@ +int SetupTarget(void) { + JLINK_ExecCommand("SetRTTSearchRanges 0x20000000 0x80000"); + return 0; +} diff --git a/hw/bsp/ra/family.c b/hw/bsp/ra/family.c new file mode 100644 index 000000000..16332be17 --- /dev/null +++ b/hw/bsp/ra/family.c @@ -0,0 +1,282 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022, Rafael Silva + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include <stdio.h> + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" +#pragma GCC diagnostic ignored "-Wundef" + +// extra push due to https://github.com/renesas/fsp/pull/278 +#pragma GCC diagnostic push +#endif + +#include "bsp_api.h" +#include "r_ioport.h" +#include "r_ioport_api.h" +#include "renesas.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + +/* Key code for writing PRCR register. */ +#define BSP_PRV_PRCR_KEY (0xA500U) + +static const ioport_cfg_t family_pin_cfg = { + .number_of_pins = sizeof(board_pin_cfg) / sizeof(ioport_pin_cfg_t), + .p_pin_cfg_data = board_pin_cfg, +}; +static ioport_instance_ctrl_t port_ctrl; + +//--------------------------------------------------------------------+ +// Vector Data +//--------------------------------------------------------------------+ + +BSP_DONT_REMOVE BSP_PLACE_IN_SECTION(BSP_SECTION_APPLICATION_VECTORS) +const fsp_vector_t g_vector_table[BSP_ICU_VECTOR_MAX_ENTRIES] = { + [0] = usbfs_interrupt_handler, /* USBFS INT (USBFS interrupt) */ + [1] = usbfs_resume_handler, /* USBFS RESUME (USBFS resume interrupt) */ + [2] = usbfs_d0fifo_handler, /* USBFS FIFO 0 (DMA transfer request 0) */ + [3] = usbfs_d1fifo_handler, /* USBFS FIFO 1 (DMA transfer request 1) */ + +#ifdef BOARD_HAS_USB_HIGHSPEED + [4] = usbhs_interrupt_handler, /* USBHS INT (USBHS interrupt) */ + [5] = usbhs_d0fifo_handler, /* USBHS FIFO 0 (DMA transfer request 0) */ + [6] = usbhs_d1fifo_handler, /* USBHS FIFO 1 (DMA transfer request 1) */ +#endif +}; + +const bsp_interrupt_event_t g_interrupt_event_link_select[BSP_ICU_VECTOR_MAX_ENTRIES] = { + [0] = BSP_PRV_IELS_ENUM(EVENT_USBFS_INT), /* USBFS INT (USBFS interrupt) */ + [1] = BSP_PRV_IELS_ENUM(EVENT_USBFS_RESUME), /* USBFS RESUME (USBFS resume interrupt) */ + +#ifndef BSP_MCU_GROUP_RA2A1 + [2] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_0), /* USBFS FIFO 0 (DMA transfer request 0) */ + [3] = BSP_PRV_IELS_ENUM(EVENT_USBFS_FIFO_1), /* USBFS FIFO 1 (DMA transfer request 1) */ +#endif + +#ifdef BOARD_HAS_USB_HIGHSPEED + [4] = BSP_PRV_IELS_ENUM(EVENT_USBHS_USB_INT_RESUME), /* USBHS USB INT RESUME (USBHS interrupt) */ + [5] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_0), /* USBHS FIFO 0 (DMA transfer request 0) */ + [6] = BSP_PRV_IELS_ENUM(EVENT_USBHS_FIFO_1), /* USBHS FIFO 1 (DMA transfer request 1) */ +#endif +}; + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_init(void) { + // Enable global interrupts in CPSR register since board with bootloader such as Arduino Uno R4 + // can transfer CPU control with CPSR.I bit set to 0 (disable IRQ) + __enable_irq(); + + /* Configure pins. */ + R_IOPORT_Open(&port_ctrl, &family_pin_cfg); + +#ifdef TRACE_ETM + // TRCKCR is protected by PRCR bit0 register + R_SYSTEM->PRCR = (uint16_t) (BSP_PRV_PRCR_KEY | 0x01); + + // Enable trace clock (max 100Mhz). Since PLL/CPU is 200Mhz, clock div = 2 + R_SYSTEM->TRCKCR = R_SYSTEM_TRCKCR_TRCKEN_Msk | 0x01; + + R_SYSTEM->PRCR = (uint16_t) BSP_PRV_PRCR_KEY; +#endif + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USBFS_INT_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_RESUME_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_FIFO_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); + NVIC_SetPriority(USBFS_FIFO_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + +#if CFG_TUSB_OS == OPT_OS_NONE + SysTick_Config(SystemCoreClock / 1000); +#endif + + board_led_write(false); +} + +void board_init_after_tusb(void) { + // For board that use USB LDO regulator +#if defined(BOARD_UNO_R4) + R_USB_FS0->USBMC |= R_USB_FS0_USBMC_VDCEN_Msk; +#endif +} + +void board_led_write(bool state) { + R_IOPORT_PinWrite(&port_ctrl, LED1, state ? LED_STATE_ON : !LED_STATE_ON); +} + +uint32_t board_button_read(void) { + bsp_io_level_t lvl = !BUTTON_STATE_ACTIVE; + R_IOPORT_PinRead(&port_ctrl, SW1, &lvl); + return lvl == BUTTON_STATE_ACTIVE; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const *buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +#if CFG_TUD_ENABLED && defined(BOARD_TUD_RHPORT) + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#if CFG_TUH_ENABLED && defined(BOARD_TUH_RHPORT) + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + +//------------- USB0 FullSpeed -------------// +void usbfs_interrupt_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0, true); + #endif + + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); + #endif +} + +void usbfs_resume_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0, true); + #endif + + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); + #endif +} + +void usbfs_d0fifo_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + // TODO not used yet +} + +void usbfs_d1fifo_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + // TODO not used yet +} + +//------------- USB1 HighSpeed -------------// +#ifdef BOARD_HAS_USB_HIGHSPEED + +void usbhs_interrupt_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1, true); + #endif + + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); + #endif +} + +void usbhs_d0fifo_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + // TODO not used yet +} + +void usbhs_d1fifo_handler(void) { + IRQn_Type irq = R_FSP_CurrentIrqGet(); + R_BSP_IrqStatusClear(irq); + // TODO not used yet +} + +#endif + +//--------------------------------------------------------------------+ +// stdlib +//--------------------------------------------------------------------+ + +int close(int fd) { + (void) fd; + return -1; +} + +int fstat(int fd, void *pstat) { + (void) fd; + (void) pstat; + return 0; +} + +off_t lseek(int fd, off_t pos, int whence) { + (void) fd; + (void) pos; + (void) whence; + return 0; +} + +int isatty(int fd) { + (void) fd; + return 1; +} diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake new file mode 100644 index 000000000..426e1ca8f --- /dev/null +++ b/hw/bsp/ra/family.cmake @@ -0,0 +1,133 @@ +include_guard() + +if (NOT BOARD) + message(FATAL_ERROR "BOARD not specified") +endif () + +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) +set(FSP_RA ${TOP}/hw/mcu/renesas/fsp/ra/fsp) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +#set(FREERTOS_PORT A_CUSTOM_PORT CACHE INTERNAL "") + +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS RAXXX ${MCU_VARIANT} CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + add_library(${BOARD_TARGET} STATIC + ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/startup.c + ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Source/system.c + ${FSP_RA}/src/bsp/mcu/all/bsp_clocks.c + ${FSP_RA}/src/bsp/mcu/all/bsp_common.c + ${FSP_RA}/src/bsp/mcu/all/bsp_delay.c + ${FSP_RA}/src/bsp/mcu/all/bsp_group_irq.c + ${FSP_RA}/src/bsp/mcu/all/bsp_guard.c + ${FSP_RA}/src/bsp/mcu/all/bsp_io.c + ${FSP_RA}/src/bsp/mcu/all/bsp_irq.c + ${FSP_RA}/src/bsp/mcu/all/bsp_register_protection.c + ${FSP_RA}/src/bsp/mcu/all/bsp_rom_registers.c + ${FSP_RA}/src/bsp/mcu/all/bsp_sbrk.c + ${FSP_RA}/src/bsp/mcu/all/bsp_security.c + ${FSP_RA}/src/r_ioport/r_ioport.c + ) + + target_compile_options(${BOARD_TARGET} PUBLIC + -ffreestanding + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD}/fsp_cfg/bsp + ${CMSIS_DIR}/CMSIS/Core/Include + ${FSP_RA}/inc + ${FSP_RA}/inc/api + ${FSP_RA}/inc/instances + ${FSP_RA}/src/bsp/cmsis/Device/RENESAS/Include + ${FSP_RA}/src/bsp/mcu/all + ${FSP_RA}/src/bsp/mcu/${MCU_VARIANT} + ) + + update_board(${BOARD_TARGET}) + + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc/${MCU_VARIANT}.ld) + endif () + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${LD_FILE_GNU}" + -L${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/gcc + -nostartfiles + # nanolib + --specs=nano.specs + --specs=nosys.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ) + +# # RA has custom freertos port +# if (NOT TARGET freertos_kernel_port) +# add_library(freertos_kernel_port STATIC) +# target_sources(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port/port.c) +# target_include_directories(freertos_kernel_port PUBLIC ${FSP_RA}/src/rm_freertos_port) +# +# target_link_libraries(freertos_kernel_port PUBLIC freertos_kernel) +# endif () + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_RAXXX ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c + ${TOP}/src/portable/renesas/rusb2/rusb2_common.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) + + if (DEFINED DFU_UTIL_VID_PID) + family_add_bin_hex(${TARGET}) + family_flash_dfu_util(${TARGET} ${DFU_UTIL_VID_PID}) + endif () +endfunction() diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index d48272e61..4447e8499 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -1,55 +1,75 @@ DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5 -# Cross Compiler for RA -CROSS_COMPILE = arm-none-eabi- - +FSP_RA = hw/mcu/renesas/fsp/ra/fsp include $(TOP)/$(BOARD_PATH)/board.mk +# Don't include options setting in .bin file since it create unnecessary large file due to padding +OBJCOPY_BIN_OPTION = --only-section .text --only-section .data --only-section .rodata --only-section .bss + +# Default to port 0 fullspeed, board with port 1 highspeed should override this in board.mk +PORT ?= 0 + CFLAGS += \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_RAXXX \ + -DBOARD_TUD_RHPORT=$(PORT) \ -Wno-error=undef \ -Wno-error=strict-prototypes \ -Wno-error=cast-align \ -Wno-error=cast-qual \ -Wno-error=unused-but-set-variable \ -Wno-error=unused-variable \ - -mthumb \ -nostdlib \ -nostartfiles \ - -ffunction-sections \ - -fdata-sections \ -ffreestanding +ifeq ($(PORT), 1) + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + $(info "Using PORT 1 HighSpeed") +else + CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + $(info "Using PORT 0 FullSpeed") +endif + +LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs + SRC_C += \ src/portable/renesas/rusb2/dcd_rusb2.c \ src/portable/renesas/rusb2/hcd_rusb2.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/cmsis/Device/RENESAS/Source/startup.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/cmsis/Device/RENESAS/Source/system.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_clocks.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_common.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_delay.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_group_irq.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_guard.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_io.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_irq.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_register_protection.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_rom_registers.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_sbrk.c \ - hw/mcu/renesas/fsp/ra/fsp/src/bsp/mcu/all/bsp_security.c \ - hw/mcu/renesas/fsp/ra/fsp/src/r_ioport/r_ioport.c \ - $(FSP_BOARD_DIR)/board_init.c \ - $(FSP_BOARD_DIR)/board_leds.c + src/portable/renesas/rusb2/rusb2_common.c \ + $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/startup.c \ + $(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Source/system.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_clocks.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_common.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_delay.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_group_irq.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_guard.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_io.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_irq.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_register_protection.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_rom_registers.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_sbrk.c \ + $(FSP_RA)/src/bsp/mcu/all/bsp_security.c \ + $(FSP_RA)/src/r_ioport/r_ioport.c \ INC += \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/hw/mcu/renesas/fsp/ra/fsp/src/bsp/cmsis/Device/RENESAS/Include \ $(TOP)/$(BOARD_PATH) \ $(TOP)/$(BOARD_PATH)/fsp_cfg \ - $(TOP)/hw/mcu/renesas/fsp/ra/fsp/inc \ - $(TOP)/hw/mcu/renesas/fsp/ra/fsp/inc/api \ - $(TOP)/hw/mcu/renesas/fsp/ra/fsp/inc/instances \ - $(TOP)/$(FSP_MCU_DIR) \ - $(TOP)/$(FSP_BOARD_DIR) + $(TOP)/$(BOARD_PATH)/fsp_cfg/bsp \ + $(TOP)/$(FSP_RA)/src/bsp/cmsis/Device/RENESAS/Include \ + $(TOP)/$(FSP_RA)/inc \ + $(TOP)/$(FSP_RA)/inc/api \ + $(TOP)/$(FSP_RA)/inc/instances \ + $(TOP)/$(FSP_RA)/src/bsp/mcu/all \ + $(TOP)/$(FSP_RA)/src/bsp/mcu/$(MCU_VARIANT) \ + +ifndef LD_FILE +LD_FILE = $(FAMILY_PATH)/linker/gcc/$(MCU_VARIANT).ld +endif + +LDFLAGS += -L$(TOP)/$(FAMILY_PATH)/linker/gcc # For freeRTOS port source # hack to use the port provided by renesas -FREERTOS_PORTABLE_SRC = hw/mcu/renesas/fsp/ra/fsp/src/rm_freertos_port +FREERTOS_PORTABLE_SRC = $(FSP_RA)/src/rm_freertos_port diff --git a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld b/hw/bsp/ra/linker/gcc/fsp.ld index 8ddaa0a97..453d46f24 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/ra4m1_ek.ld +++ b/hw/bsp/ra/linker/gcc/fsp.ld @@ -1,29 +1,3 @@ -/* generated memory regions file - do not edit */ -RAM_START = 0x20000000; -RAM_LENGTH = 0x8000; -FLASH_START = 0x00000000; -FLASH_LENGTH = 0x40000; -DATA_FLASH_START = 0x40100000; -DATA_FLASH_LENGTH = 0x2000; -OPTION_SETTING_START = 0x00000000; -OPTION_SETTING_LENGTH = 0x0; -OPTION_SETTING_S_START = 0x80000000; -OPTION_SETTING_S_LENGTH = 0x0; -ID_CODE_START = 0x01010018; -ID_CODE_LENGTH = 0x20; -SDRAM_START = 0x80010000; -SDRAM_LENGTH = 0x0; -QSPI_FLASH_START = 0x60000000; -QSPI_FLASH_LENGTH = 0x0; -OSPI_DEVICE_0_START = 0x80020000; -OSPI_DEVICE_0_LENGTH = 0x0; -OSPI_DEVICE_1_START = 0x80030000; -OSPI_DEVICE_1_LENGTH = 0x0; - -/* - Linker File for Renesas FSP -*/ - /* Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.*/ /* XIP_SECONDARY_SLOT_IMAGE = 1; @@ -553,6 +527,7 @@ SECTIONS { . = ALIGN(8); __HeapBase = .; + PROVIDE(end = .); /* Place the STD heap here. */ KEEP(*(.heap)) __HeapLimit = .; @@ -628,6 +603,11 @@ SECTIONS /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ __tz_ID_CODE_S = ORIGIN(ID_CODE); + /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. + * Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE + * memory region between TrustZone projects. */ + __tz_ID_CODE_N = __tz_ID_CODE_S; + .id_code : { __ID_Code_Start = .; @@ -635,8 +615,6 @@ SECTIONS __ID_Code_End = .; } > ID_CODE - /* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */ - __tz_ID_CODE_N = __ID_Code_End; /* Symbol required for RA Configuration tool. */ __tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING_OFS); diff --git a/hw/bsp/ra/linker/gcc/ra2a1.ld b/hw/bsp/ra/linker/gcc/ra2a1.ld new file mode 100644 index 000000000..218acbb2a --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra2a1.ld @@ -0,0 +1,22 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x8000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x40000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x01010018; +ID_CODE_LENGTH = 0x20; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x0; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra4m1.ld b/hw/bsp/ra/linker/gcc/ra4m1.ld new file mode 100644 index 000000000..218acbb2a --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra4m1.ld @@ -0,0 +1,22 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x8000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x40000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x01010018; +ID_CODE_LENGTH = 0x20; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x0; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra4m3.ld b/hw/bsp/ra/linker/gcc/ra4m3.ld new file mode 100644 index 000000000..7b3a63fbe --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra4m3.ld @@ -0,0 +1,22 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x20000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x100000; +DATA_FLASH_START = 0x08000000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x0100A100; +OPTION_SETTING_LENGTH = 0x100; +OPTION_SETTING_S_START = 0x0100A200; +OPTION_SETTING_S_LENGTH = 0x100; +ID_CODE_START = 0x00000000; +ID_CODE_LENGTH = 0x0; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x4000000; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra6m1.ld b/hw/bsp/ra/linker/gcc/ra6m1.ld new file mode 100644 index 000000000..91d27f74c --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra6m1.ld @@ -0,0 +1,22 @@ +RAM_START = 0x1FFE0000; +RAM_LENGTH = 0x40000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x80000; +DATA_FLASH_START = 0x40100000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x00000000; +OPTION_SETTING_LENGTH = 0x0; +OPTION_SETTING_S_START = 0x80000000; +OPTION_SETTING_S_LENGTH = 0x0; +ID_CODE_START = 0x0100A150; +ID_CODE_LENGTH = 0x10; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x4000000; +OSPI_DEVICE_0_START = 0x80020000; +OSPI_DEVICE_0_LENGTH = 0x0; +OSPI_DEVICE_1_START = 0x80030000; +OSPI_DEVICE_1_LENGTH = 0x0; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/linker/gcc/ra6m5.ld b/hw/bsp/ra/linker/gcc/ra6m5.ld new file mode 100644 index 000000000..af747fd9b --- /dev/null +++ b/hw/bsp/ra/linker/gcc/ra6m5.ld @@ -0,0 +1,22 @@ +RAM_START = 0x20000000; +RAM_LENGTH = 0x80000; +FLASH_START = 0x00000000; +FLASH_LENGTH = 0x200000; +DATA_FLASH_START = 0x08000000; +DATA_FLASH_LENGTH = 0x2000; +OPTION_SETTING_START = 0x0100A100; +OPTION_SETTING_LENGTH = 0x100; +OPTION_SETTING_S_START = 0x0100A200; +OPTION_SETTING_S_LENGTH = 0x100; +ID_CODE_START = 0x00000000; +ID_CODE_LENGTH = 0x0; +SDRAM_START = 0x80010000; +SDRAM_LENGTH = 0x0; +QSPI_FLASH_START = 0x60000000; +QSPI_FLASH_LENGTH = 0x4000000; +OSPI_DEVICE_0_START = 0x68000000; +OSPI_DEVICE_0_LENGTH = 0x8000000; +OSPI_DEVICE_1_START = 0x70000000; +OSPI_DEVICE_1_LENGTH = 0x10000000; + +INCLUDE fsp.ld diff --git a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h b/hw/bsp/ra/r_ioport_cfg.h index cb7c07932..cb7c07932 100644 --- a/hw/bsp/ra/boards/ra4m1_ek/fsp_cfg/r_ioport_cfg.h +++ b/hw/bsp/ra/r_ioport_cfg.h diff --git a/hw/bsp/ra/vector_data.h b/hw/bsp/ra/vector_data.h new file mode 100644 index 000000000..ca667faa3 --- /dev/null +++ b/hw/bsp/ra/vector_data.h @@ -0,0 +1,36 @@ +/* vector numbers are configurable/dynamic, hence this, it will be used inside the port */ +#ifndef VECTOR_DATA_H +#define VECTOR_DATA_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* ISR prototypes */ +void usbfs_interrupt_handler(void); +void usbfs_resume_handler(void); +void usbfs_d0fifo_handler(void); +void usbfs_d1fifo_handler(void); + +#ifdef BOARD_HAS_USB_HIGHSPEED +void usbhs_interrupt_handler(void); +void usbhs_d0fifo_handler(void); +void usbhs_d1fifo_handler(void); +#endif + +/* Vector table allocations */ +#define USBFS_INT_IRQn 0 +#define USBFS_RESUME_IRQn 1 +#define USBFS_FIFO_0_IRQn 2 +#define USBFS_FIFO_1_IRQn 3 + +#define USBHS_USB_INT_RESUME_IRQn 4 /* USBHS USB INT RESUME (USBHS interrupt) */ +#define USBHS_FIFO_0_IRQn 5 /* USBHS FIFO 0 (DMA transfer request 0) */ +#define USBHS_FIFO_1_IRQn 6 /* USBHS FIFO 1 (DMA transfer request 1) */ + + +#ifdef __cplusplus +} +#endif + +#endif |