1 files changed, 0 insertions, 159 deletions
diff --git a/hw/bsp/same70_qmtech/same70_qmtech.c b/hw/bsp/same70_qmtech/same70_qmtech.c
deleted file mode 100644
index e5f0da198..000000000
--- a/hw/bsp/same70_qmtech/same70_qmtech.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2019, hathach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- */
-
-#include "sam.h"
-#include "bsp/board_api.h"
-
-#include "peripheral_clk_config.h"
-#include "hpl/usart/hpl_usart_base.h"
-#include "hpl/pmc/hpl_pmc.h"
-#include "hal/include/hal_init.h"
-#include "hal/include/hal_usart_async.h"
-#include "hal/include/hal_gpio.h"
-
-
-// You can get the board here:
-// https://www.aliexpress.com/item/1005003173783268.html
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-
-#define LED_PIN               GPIO(GPIO_PORTA, 15)
-
-#define BUTTON_PIN            GPIO(GPIO_PORTA, 21)
-#define BUTTON_STATE_ACTIVE   0
-
-#define UART_TX_PIN           GPIO(GPIO_PORTB, 1)
-#define UART_RX_PIN           GPIO(GPIO_PORTB, 0)
-
-static struct usart_async_descriptor edbg_com;
-static uint8_t edbg_com_buffer[64];
-static volatile bool uart_busy = false;
-
-static void tx_cb_EDBG_COM(const struct usart_async_descriptor *const io_descr)
-{
-  (void) io_descr;
-  uart_busy = false;
-}
-
-//------------- IMPLEMENTATION -------------//
-void board_init(void)
-{
-  init_mcu();
-
-  /* Disable Watchdog */
-  hri_wdt_set_MR_WDDIS_bit(WDT);
-
-  // LED
-  _pmc_enable_periph_clock(ID_PIOB);
-  gpio_set_pin_level(LED_PIN, false);
-  gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
-  gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF);
-
-  // Button
-  _pmc_enable_periph_clock(ID_PIOA);
-  gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
-  gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP);
-  gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF);
-
-  // Uart via EDBG Com
-  _pmc_enable_periph_clock(ID_USART1);
-  gpio_set_pin_function(UART_RX_PIN, MUX_PA21A_USART1_RXD1);
-  gpio_set_pin_function(UART_TX_PIN, MUX_PB4D_USART1_TXD1);
-
-  usart_async_init(&edbg_com, USART1, edbg_com_buffer, sizeof(edbg_com_buffer), _usart_get_usart_async());
-  usart_async_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE);
-  usart_async_register_callback(&edbg_com, USART_ASYNC_TXC_CB, tx_cb_EDBG_COM);
-  usart_async_enable(&edbg_com);
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-  // 1ms tick timer (samd SystemCoreClock may not correct)
-  SysTick_Config(CONF_CPU_FREQUENCY / 1000);
-#endif
-
-  // Enable USB clock
-  _pmc_enable_periph_clock(ID_USBHS);
-
-}
-
-//--------------------------------------------------------------------+
-// USB Interrupt Handler
-//--------------------------------------------------------------------+
-void USBHS_Handler(void)
-{
-  tud_int_handler(0);
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  gpio_set_pin_level(LED_PIN, state);
-}
-
-uint32_t board_button_read(void)
-{
-  return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN);
-}
-
-int board_uart_read(uint8_t* buf, int len)
-{
-  (void) buf; (void) len;
-  return 0;
-}
-
-int board_uart_write(void const * buf, int len)
-{
-  // while until previous transfer is complete
-  while(uart_busy) {}
-  uart_busy = true;
-
-  io_write(&edbg_com.io, buf, len);
-  return len;
-}
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-
-void SysTick_Handler (void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#endif
-
-// Required by __libc_init_array in startup code if we are compiling using
-// -nostdlib/-nostartfiles.
-void _init(void)
-{
-
-}