diff options
Diffstat (limited to 'lib/rt-thread/tusb_config.h')
| -rw-r--r-- | lib/rt-thread/tusb_config.h | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/lib/rt-thread/tusb_config.h b/lib/rt-thread/tusb_config.h new file mode 100644 index 000000000..11dc21983 --- /dev/null +++ b/lib/rt-thread/tusb_config.h @@ -0,0 +1,218 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef _TUSB_CONFIG_H_ +#define _TUSB_CONFIG_H_ + +#ifdef __RTTHREAD__ +#include <rtconfig.h> + +#ifdef __cplusplus +extern "C" { +#endif + +//-------------------------------------------------------------------- +// COMMON CONFIGURATION +//-------------------------------------------------------------------- + +#if defined(SOC_SERIES_STM32F0) +#define CFG_TUSB_MCU OPT_MCU_STM32F0 +#elif defined(SOC_SERIES_STM32F1) +#define CFG_TUSB_MCU OPT_MCU_STM32F1 +#elif defined(SOC_SERIES_STM32F2) +#define CFG_TUSB_MCU OPT_MCU_STM32F2 +#elif defined(SOC_SERIES_STM32F3) +#define CFG_TUSB_MCU OPT_MCU_STM32F3 +#elif defined(SOC_SERIES_STM32F4) +#define CFG_TUSB_MCU OPT_MCU_STM32F4 +#elif defined(SOC_SERIES_STM32F7) +#define CFG_TUSB_MCU OPT_MCU_STM32F7 +#elif defined(SOC_SERIES_STM32H7) +#define CFG_TUSB_MCU OPT_MCU_STM32H7 +#elif defined(SOC_SERIES_STM32L0) +#define CFG_TUSB_MCU OPT_MCU_STM32L0 +#elif defined(SOC_SERIES_STM32L1) +#define CFG_TUSB_MCU OPT_MCU_STM32L1 +#elif defined(SOC_SERIES_STM32L4) +#define CFG_TUSB_MCU OPT_MCU_STM32L4 +#elif defined(SOC_NRF52840) +#define CFG_TUSB_MCU OPT_MCU_NRF5X +#elif defined(SOC_HPM6000) +#define CFG_TUSB_MCU OPT_MCU_HPM +#elif defined(SOC_RP2040) +#define CFG_TUSB_MCU OPT_MCU_RP2040 +#elif defined(SOC_FAMILY_RENESAS) +#define CFG_TUSB_MCU OPT_MCU_RAXXX +#else +#error "Not support for current MCU" +#endif + +#define CFG_TUSB_OS OPT_OS_RTTHREAD + +//-------------------------------------------------------------------- +// DEBUG CONFIGURATION +//-------------------------------------------------------------------- +#ifdef CFG_TUSB_DEBUG +#define CFG_TUSB_DEBUG_PRINTF rt_kprintf +#endif /* CFG_TUSB_DEBUG */ + +#ifndef BOARD_DEVICE_RHPORT_NUM +#define BOARD_DEVICE_RHPORT_NUM PKG_TINYUSB_RHPORT_NUM +#endif + +#ifndef BOARD_DEVICE_RHPORT_SPEED +#define BOARD_DEVICE_RHPORT_SPEED PKG_TINYUSB_DEVICE_PORT_SPEED +#endif + +#if BOARD_DEVICE_RHPORT_NUM == 0 +#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#elif BOARD_DEVICE_RHPORT_NUM == 1 +#define CFG_TUSB_RHPORT1_MODE (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED) +#else + #error "Incorrect RHPort configuration" +#endif + +/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment. + * Tinyusb use follows macros to declare transferring memory so that they can be put + * into those specific section. + * e.g + * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") )) + * - CFG_TUSB_MEM_ALIGN : __attribute__ ((aligned(4))) + */ +#ifndef CFG_TUSB_MEM_SECTION +#define CFG_TUSB_MEM_SECTION rt_section(PKG_TINYUSB_MEM_SECTION) +#endif + +#ifndef CFG_TUSB_MEM_ALIGN +#define CFG_TUSB_MEM_ALIGN rt_align(PKG_TINYUSB_MEM_ALIGN) +#endif + +//-------------------------------------------------------------------- +// DEVICE CONFIGURATION +//-------------------------------------------------------------------- +#if defined(PKG_TINYUSB_DEVICE_ENABLE) + #define CFG_TUD_ENABLED (1) +#else + #define CFG_TUD_ENABLED (0) +#endif + +#ifndef CFG_TUD_ENDPOINT0_SIZE +#define CFG_TUD_ENDPOINT0_SIZE PKG_TINYUSB_EDPT0_SIZE +#endif + +// CDC FIFO size of TX and RX +#define CFG_TUD_CDC_RX_BUFSIZE PKG_TINYUSB_DEVICE_CDC_RX_BUFSIZE +#define CFG_TUD_CDC_TX_BUFSIZE PKG_TINYUSB_DEVICE_CDC_TX_BUFSIZE + +#define CFG_TUD_MSC_EP_BUFSIZE PKG_TINYUSB_DEVICE_MSC_EP_BUFSIZE + +#define CFG_TUD_HID_EP_BUFSIZE PKG_TINYUSB_DEVICE_HID_EP_BUFSIZE + +#ifndef PKG_TINYUSB_DEVICE_CDC_STRING +#define PKG_TINYUSB_DEVICE_CDC_STRING "" +#endif + +#ifndef PKG_TINYUSB_DEVICE_MSC_STRING +#define PKG_TINYUSB_DEVICE_MSC_STRING "" +#endif + +#ifndef PKG_TINYUSB_DEVICE_HID_STRING +#define PKG_TINYUSB_DEVICE_HID_STRING "" +#endif + +//-------------------------------------------------------------------- +// HOST CONFIGURATION +//-------------------------------------------------------------------- +#if defined(PKG_TINYUSB_HOST_ENABLE) + #define CFG_TUH_ENABLED (1) +#else + #define CFG_TUH_ENABLED (0) +#endif + +#if (PKG_TINYUSB_HOST_PORT == 0) && defined(PKG_TINYUSB_HOST_ENABLE) +#undef CFG_TUSB_RHPORT0_MODE +#define CFG_TUSB_RHPORT0_MODE (OPT_MODE_HOST | PKG_TINYUSB_HOST_PORT_SPEED) +#endif + +#if (PKG_TINYUSB_HOST_PORT == 1) && defined(PKG_TINYUSB_HOST_ENABLE) +#undef CFG_TUSB_RHPORT1_MODE +#define CFG_TUSB_RHPORT1_MODE (OPT_MODE_HOST | PKG_TINYUSB_HOST_PORT_SPEED) +#endif + +#define BOARD_TUH_RHPORT PKG_TINYUSB_HOST_PORT // FULL SPEED +#define BOARD_TUH_MAX_SPEED PKG_TINYUSB_HOST_PORT_SPEED +// Default is max speed that hardware controller could support with on-chip PHY +#define CFG_TUH_MAX_SPEED BOARD_TUH_MAX_SPEED + +//------------------------- Board Specific -------------------------- + +// RHPort number used for host can be defined by board.mk, default to port 0 +#ifndef BOARD_TUH_RHPORT +#define BOARD_TUH_RHPORT 0 +#endif + +// RHPort max operational speed can defined by board.mk +#ifndef BOARD_TUH_MAX_SPEED +#define BOARD_TUH_MAX_SPEED OPT_MODE_DEFAULT_SPEED +#endif + +// Size of buffer to hold descriptors and other data used for enumeration +#define CFG_TUH_ENUMERATION_BUFSIZE 256 + +#define CFG_TUH_HUB 2 // number of supported hubs +#define CFG_TUH_CDC 0 // CDC ACM +#define CFG_TUH_CDC_FTDI 0 // FTDI Serial. FTDI is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CP210X 0 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_CDC_CH34X 0 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API +#define CFG_TUH_HID 0 // typical keyboard + mouse device can have 3-4 HID interfaces +#define CFG_TUH_MSC 0 +//#define CFG_TUH_VENDOR 3 + +// max device support (excluding hub device): 1 hub typically has 4 ports +#define CFG_TUH_DEVICE_MAX (3*CFG_TUH_HUB + 1) + +//------------- HID -------------// +#define CFG_TUH_HID_EPIN_BUFSIZE 64 +#define CFG_TUH_HID_EPOUT_BUFSIZE 64 + +//------------- CDC -------------// + +// Set Line Control state on enumeration/mounted: +// DTR ( bit 0), RTS (bit 1) +#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM 0x03 + +// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t +// bit rate = 115200, 1 stop bit, no parity, 8 bit data width +#define CFG_TUH_CDC_LINE_CODING_ON_ENUM { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } + + + +#ifdef __cplusplus +} +#endif +#endif /*__RTTHREAD__*/ + +#endif /* _TUSB_CONFIG_H_ */ |