1 files changed, 147 insertions, 0 deletions
diff --git a/lib/rt-thread/tusb_config.h b/lib/rt-thread/tusb_config.h
new file mode 100644
index 000000000..8b145f3f7
--- /dev/null
+++ b/lib/rt-thread/tusb_config.h
@@ -0,0 +1,147 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __RTTHREAD__
+#include <rtconfig.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+#if   defined(SOC_SERIES_STM32F0)
+#define CFG_TUSB_MCU    OPT_MCU_STM32F0
+#elif defined(SOC_SERIES_STM32F1)
+#define CFG_TUSB_MCU    OPT_MCU_STM32F1
+#elif defined(SOC_SERIES_STM32F2)
+#define CFG_TUSB_MCU    OPT_MCU_STM32F2
+#elif defined(SOC_SERIES_STM32F3)
+#define CFG_TUSB_MCU    OPT_MCU_STM32F3
+#elif defined(SOC_SERIES_STM32F4)
+#define CFG_TUSB_MCU    OPT_MCU_STM32F4
+#elif defined(SOC_SERIES_STM32F7)
+#define CFG_TUSB_MCU    OPT_MCU_STM32F7
+#elif defined(SOC_SERIES_STM32H7)
+#define CFG_TUSB_MCU    OPT_MCU_STM32H7
+#elif defined(SOC_SERIES_STM32L0)
+#define CFG_TUSB_MCU    OPT_MCU_STM32L0
+#elif defined(SOC_SERIES_STM32L1)
+#define CFG_TUSB_MCU    OPT_MCU_STM32L1
+#elif defined(SOC_SERIES_STM32L4)
+#define CFG_TUSB_MCU    OPT_MCU_STM32L4
+#elif defined(SOC_NRF52840)
+#define CFG_TUSB_MCU    OPT_MCU_NRF5X
+#elif defined(SOC_HPM6000)
+#define CFG_TUSB_MCU    OPT_MCU_HPM
+#elif defined(SOC_RP2040)
+#define CFG_TUSB_MCU    OPT_MCU_RP2040
+#elif defined(SOC_FAMILY_RENESAS)
+#define CFG_TUSB_MCU    OPT_MCU_RAXXX
+#else
+#error "Not support for current MCU"
+#endif
+
+#define CFG_TUSB_OS OPT_OS_RTTHREAD
+
+//--------------------------------------------------------------------
+// DEBUG CONFIGURATION
+//--------------------------------------------------------------------
+#ifdef CFG_TUSB_DEBUG
+#define CFG_TUSB_DEBUG_PRINTF rt_kprintf
+#endif /* CFG_TUSB_DEBUG */
+
+#ifndef BOARD_DEVICE_RHPORT_NUM
+#define BOARD_DEVICE_RHPORT_NUM     PKG_TINYUSB_RHPORT_NUM
+#endif
+
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+#define BOARD_DEVICE_RHPORT_SPEED   PKG_TINYUSB_DEVICE_PORT_SPEED
+#endif
+
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+#define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+#define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#else
+  #error "Incorrect RHPort configuration"
+#endif
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION        rt_section(PKG_TINYUSB_MEM_SECTION)
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          rt_align(PKG_TINYUSB_MEM_ALIGN)
+#endif
+
+//--------------------------------------------------------------------
+// DEVICE CONFIGURATION
+//--------------------------------------------------------------------
+
+#ifndef CFG_TUD_ENDPOINT0_SIZE
+#define CFG_TUD_ENDPOINT0_SIZE        PKG_TINYUSB_EDPT0_SIZE
+#endif
+
+// CDC FIFO size of TX and RX
+#define CFG_TUD_CDC_RX_BUFSIZE        PKG_TINYUSB_DEVICE_CDC_RX_BUFSIZE
+#define CFG_TUD_CDC_TX_BUFSIZE        PKG_TINYUSB_DEVICE_CDC_TX_BUFSIZE
+
+#define CFG_TUD_MSC_EP_BUFSIZE        PKG_TINYUSB_DEVICE_MSC_EP_BUFSIZE
+
+#define CFG_TUD_HID_EP_BUFSIZE        PKG_TINYUSB_DEVICE_HID_EP_BUFSIZE
+
+#ifndef PKG_TINYUSB_DEVICE_CDC_STRING
+#define PKG_TINYUSB_DEVICE_CDC_STRING ""
+#endif
+
+#ifndef PKG_TINYUSB_DEVICE_MSC_STRING
+#define PKG_TINYUSB_DEVICE_MSC_STRING ""
+#endif
+
+#ifndef PKG_TINYUSB_DEVICE_HID_STRING
+#define PKG_TINYUSB_DEVICE_HID_STRING ""
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+#endif /*__RTTHREAD__*/
+
+#endif /* _TUSB_CONFIG_H_ */