diff options
Diffstat (limited to 'src/class/cdc/serial')
| -rw-r--r-- | src/class/cdc/serial/ch34x.h | 74 | ||||
| -rw-r--r-- | src/class/cdc/serial/cp210x.h | 56 | ||||
| -rw-r--r-- | src/class/cdc/serial/ftdi_sio.h | 391 | ||||
| -rw-r--r-- | src/class/cdc/serial/pl2303.h | 159 |
4 files changed, 438 insertions, 242 deletions
diff --git a/src/class/cdc/serial/ch34x.h b/src/class/cdc/serial/ch34x.h index c18066f57..0e08b0acd 100644 --- a/src/class/cdc/serial/ch34x.h +++ b/src/class/cdc/serial/ch34x.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _CH34X_H_ -#define _CH34X_H_ +#ifndef TUSB_CH34X_H +#define TUSB_CH34X_H // There is no official documentation for the CH34x (CH340, CH341) chips. Reference can be found // - https://github.com/WCHSoftGroup/ch341ser_linux @@ -34,51 +34,51 @@ // set line_coding @ enumeration #ifdef CFG_TUH_CDC_LINE_CODING_ON_ENUM -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM_CH34X CFG_TUH_CDC_LINE_CODING_ON_ENUM + #define CFG_TUH_CDC_LINE_CODING_ON_ENUM_CH34X CFG_TUH_CDC_LINE_CODING_ON_ENUM #else // this default is necessary to work properly -#define CFG_TUH_CDC_LINE_CODING_ON_ENUM_CH34X { 9600, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } + #define CFG_TUH_CDC_LINE_CODING_ON_ENUM_CH34X { 9600, CDC_LINE_CONDING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 } #endif // USB requests -#define CH34X_REQ_READ_VERSION 0x5F // dec 95 -#define CH34X_REQ_WRITE_REG 0x9A // dec 154 -#define CH34X_REQ_READ_REG 0x95 // dec 149 -#define CH34X_REQ_SERIAL_INIT 0xA1 // dec 161 -#define CH34X_REQ_MODEM_CTRL 0xA4 // dev 164 +#define CH34X_REQ_READ_VERSION 0x5F // dec 95 +#define CH34X_REQ_WRITE_REG 0x9A // dec 154 +#define CH34X_REQ_READ_REG 0x95 // dec 149 +#define CH34X_REQ_SERIAL_INIT 0xA1 // dec 161 +#define CH34X_REQ_MODEM_CTRL 0xA4 // dev 164 // registers -#define CH34X_REG_BREAK 0x05 -#define CH34X_REG_PRESCALER 0x12 -#define CH34X_REG_DIVISOR 0x13 -#define CH34X_REG_LCR 0x18 -#define CH34X_REG_LCR2 0x25 -#define CH34X_REG_MCR_MSR 0x06 -#define CH34X_REG_MCR_MSR2 0x07 -#define CH34X_NBREAK_BITS 0x01 +#define CH34X_REG_BREAK 0x05 +#define CH34X_REG_PRESCALER 0x12 +#define CH34X_REG_DIVISOR 0x13 +#define CH34X_REG_LCR 0x18 +#define CH34X_REG_LCR2 0x25 +#define CH34X_REG_MCR_MSR 0x06 +#define CH34X_REG_MCR_MSR2 0x07 +#define CH34X_NBREAK_BITS 0x01 -#define CH341_REG_0x0F 0x0F // undocumented register -#define CH341_REG_0x2C 0x2C // undocumented register -#define CH341_REG_0x27 0x27 // hardware flow control (cts/rts) +#define CH341_REG_0x0F 0x0F // undocumented register +#define CH341_REG_0x2C 0x2C // undocumented register +#define CH341_REG_0x27 0x27 // hardware flow control (cts/rts) -#define CH34X_REG16_DIVISOR_PRESCALER TU_U16(CH34X_REG_DIVISOR, CH34X_REG_PRESCALER) -#define CH32X_REG16_LCR2_LCR TU_U16(CH34X_REG_LCR2, CH34X_REG_LCR) +#define CH34X_REG16_DIVISOR_PRESCALER TU_U16(CH34X_REG_DIVISOR, CH34X_REG_PRESCALER) +#define CH32X_REG16_LCR2_LCR TU_U16(CH34X_REG_LCR2, CH34X_REG_LCR) // modem control bits -#define CH34X_BIT_RTS ( 1 << 6 ) -#define CH34X_BIT_DTR ( 1 << 5 ) +#define CH34X_BIT_RTS (1 << 6) +#define CH34X_BIT_DTR (1 << 5) // line control bits -#define CH34X_LCR_ENABLE_RX 0x80 -#define CH34X_LCR_ENABLE_TX 0x40 -#define CH34X_LCR_MARK_SPACE 0x20 -#define CH34X_LCR_PAR_EVEN 0x10 -#define CH34X_LCR_ENABLE_PAR 0x08 -#define CH34X_LCR_PAR_MASK 0x38 // all parity bits -#define CH34X_LCR_STOP_BITS_2 0x04 -#define CH34X_LCR_CS8 0x03 -#define CH34X_LCR_CS7 0x02 -#define CH34X_LCR_CS6 0x01 -#define CH34X_LCR_CS5 0x00 -#define CH34X_LCR_CS_MASK 0x03 // all CSx bits +#define CH34X_LCR_ENABLE_RX 0x80 +#define CH34X_LCR_ENABLE_TX 0x40 +#define CH34X_LCR_MARK_SPACE 0x20 +#define CH34X_LCR_PAR_EVEN 0x10 +#define CH34X_LCR_ENABLE_PAR 0x08 +#define CH34X_LCR_PAR_MASK 0x38 // all parity bits +#define CH34X_LCR_STOP_BITS_2 0x04 +#define CH34X_LCR_CS8 0x03 +#define CH34X_LCR_CS7 0x02 +#define CH34X_LCR_CS6 0x01 +#define CH34X_LCR_CS5 0x00 +#define CH34X_LCR_CS_MASK 0x03 // all CSx bits -#endif /* _CH34X_H_ */ +#endif // TUSB_CH34X_H diff --git a/src/class/cdc/serial/cp210x.h b/src/class/cdc/serial/cp210x.h index 2c749f522..a0eff9e40 100644 --- a/src/class/cdc/serial/cp210x.h +++ b/src/class/cdc/serial/cp210x.h @@ -28,9 +28,10 @@ // Protocol details can be found at AN571: CP210x Virtual COM Port Interface // https://www.silabs.com/documents/public/application-notes/AN571.pdf -#define TU_CP210X_VID 0x10C4 +// parts are overtaken from vendors driver +// https://www.silabs.com/documents/public/software/cp210x-3.1.0.tar.gz -/* Config request codes */ +// Config request codes #define CP210X_IFC_ENABLE 0x00 #define CP210X_SET_BAUDDIV 0x01 #define CP210X_GET_BAUDDIV 0x02 @@ -59,4 +60,55 @@ #define CP210X_SET_BAUDRATE 0x1E #define CP210X_VENDOR_SPECIFIC 0xFF // GPIO, Recipient must be Device +// SILABSER_IFC_ENABLE_REQUEST_CODE +#define CP210X_UART_ENABLE 0x0001 +#define CP210X_UART_DISABLE 0x0000 + +// SILABSER_SET_BAUDDIV_REQUEST_CODE +#define CP210X_BAUD_RATE_GEN_FREQ 0x384000 + +// SILABSER_SET_LINE_CTL_REQUEST_CODE +#define CP210X_BITS_DATA_MASK 0x0f00 +#define CP210X_BITS_DATA_5 0x0500 +#define CP210X_BITS_DATA_6 0x0600 +#define CP210X_BITS_DATA_7 0x0700 +#define CP210X_BITS_DATA_8 0x0800 +#define CP210X_BITS_DATA_9 0x0900 + +#define CP210X_BITS_PARITY_MASK 0x00f0 +#define CP210X_BITS_PARITY_NONE 0x0000 +#define CP210X_BITS_PARITY_ODD 0x0010 +#define CP210X_BITS_PARITY_EVEN 0x0020 +#define CP210X_BITS_PARITY_MARK 0x0030 +#define CP210X_BITS_PARITY_SPACE 0x0040 + +#define CP210X_BITS_STOP_MASK 0x000f +#define CP210X_BITS_STOP_1 0x0000 +#define CP210X_BITS_STOP_1_5 0x0001 +#define CP210X_BITS_STOP_2 0x0002 + +// SILABSER_SET_BREAK_REQUEST_CODE +#define CP210X_BREAK_ON 0x0001 +#define CP210X_BREAK_OFF 0x0000 + +// SILABSER_SET_MHS_REQUEST_CODE +#define CP210X_MCR_DTR 0x0001 +#define CP210X_MCR_RTS 0x0002 +#define CP210X_MCR_ALL 0x0003 +#define CP210X_MSR_CTS 0x0010 +#define CP210X_MSR_DSR 0x0020 +#define CP210X_MSR_RING 0x0040 +#define CP210X_MSR_DCD 0x0080 +#define CP210X_MSR_ALL 0x00F0 + +#define CP210X_CONTROL_WRITE_DTR 0x0100UL +#define CP210X_CONTROL_WRITE_RTS 0x0200UL + +#define CP210X_LSR_BREAK 0x0001 +#define CP210X_LSR_FRAMING_ERROR 0x0002 +#define CP210X_LSR_HW_OVERRUN 0x0004 +#define CP210X_LSR_QUEUE_OVERRUN 0x0008 +#define CP210X_LSR_PARITY_ERROR 0x0010 +#define CP210X_LSR_ALL 0x001F + #endif //TUSB_CP210X_H diff --git a/src/class/cdc/serial/ftdi_sio.h b/src/class/cdc/serial/ftdi_sio.h index 0825f0719..8abf74f11 100644 --- a/src/class/cdc/serial/ftdi_sio.h +++ b/src/class/cdc/serial/ftdi_sio.h @@ -25,222 +25,207 @@ #ifndef TUSB_FTDI_SIO_H #define TUSB_FTDI_SIO_H -// VID for matching FTDI devices -#define TU_FTDI_VID 0x0403 +#include <stdint.h> // Commands -#define FTDI_SIO_RESET 0 /* Reset the port */ -#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ -#define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ -#define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ -#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem status register */ -#define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ -#define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ -#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ -#define FTDI_SIO_GET_LATENCY_TIMER 0x0a /* Get the latency timer */ -#define FTDI_SIO_SET_BITMODE 0x0b /* Set bitbang mode */ -#define FTDI_SIO_READ_PINS 0x0c /* Read immediate value of pins */ -#define FTDI_SIO_READ_EEPROM 0x90 /* Read EEPROM */ +#define FTDI_SIO_RESET 0 // Reset the port +#define FTDI_SIO_MODEM_CTRL 1 // Set the modem control register +#define FTDI_SIO_SET_FLOW_CTRL 2 // Set flow control register +#define FTDI_SIO_SET_BAUD_RATE 3 // Set baud rate +#define FTDI_SIO_SET_DATA 4 // Set the data characteristics of the port +#define FTDI_SIO_GET_MODEM_STATUS 5 // Retrieve current value of modem status register +#define FTDI_SIO_SET_EVENT_CHAR 6 // Set the event character +#define FTDI_SIO_SET_ERROR_CHAR 7 // Set the error character +#define FTDI_SIO_SET_LATENCY_TIMER 9 // Set the latency timer +#define FTDI_SIO_GET_LATENCY_TIMER 10 // Get the latency timer +#define FTDI_SIO_SET_BITMODE 11 // Set bitbang mode +#define FTDI_SIO_READ_PINS 12 // Read immediate value of pins +#define FTDI_SIO_READ_EEPROM 0x90 // Read EEPROM -/* FTDI_SIO_RESET */ -#define FTDI_SIO_RESET_SIO 0 -#define FTDI_SIO_RESET_PURGE_RX 1 -#define FTDI_SIO_RESET_PURGE_TX 2 +// Channel indices for FT2232, FT2232H and FT4232H devices +#define CHANNEL_A 1 +#define CHANNEL_B 2 +#define CHANNEL_C 3 +#define CHANNEL_D 4 -/* - * BmRequestType: 0100 0000B - * bRequest: FTDI_SIO_RESET - * wValue: Control Value - * 0 = Reset SIO - * 1 = Purge RX buffer - * 2 = Purge TX buffer - * wIndex: Port - * wLength: 0 - * Data: None - * - * The Reset SIO command has this effect: - * - * Sets flow control set to 'none' - * Event char = $0D - * Event trigger = disabled - * Purge RX buffer - * Purge TX buffer - * Clear DTR - * Clear RTS - * baud and data format not reset - * - * The Purge RX and TX buffer commands affect nothing except the buffers - * - */ +// Port Identifier Table +#define PIT_DEFAULT 0 // SIOA +#define PIT_SIOA 1 // SIOA +// The device this driver is tested with one has only one port +#define PIT_SIOB 2 // SIOB +#define PIT_PARALLEL 3 // Parallel -/* FTDI_SIO_MODEM_CTRL */ -/* - * BmRequestType: 0100 0000B - * bRequest: FTDI_SIO_MODEM_CTRL - * wValue: ControlValue (see below) - * wIndex: Port - * wLength: 0 - * Data: None - * - * NOTE: If the device is in RTS/CTS flow control, the RTS set by this - * command will be IGNORED without an error being returned - * Also - you can not set DTR and RTS with one control message - */ +// FTDI_SIO_RESET +#define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET +#define FTDI_SIO_RESET_REQUEST_TYPE 0x40 +#define FTDI_SIO_RESET_SIO 0 +#define FTDI_SIO_RESET_PURGE_RX 1 +#define FTDI_SIO_RESET_PURGE_TX 2 -#define FTDI_SIO_SET_DTR_MASK 0x1 -#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK << 8) | 1) -#define FTDI_SIO_SET_DTR_LOW ((FTDI_SIO_SET_DTR_MASK << 8) | 0) -#define FTDI_SIO_SET_RTS_MASK 0x2 -#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2) -#define FTDI_SIO_SET_RTS_LOW ((FTDI_SIO_SET_RTS_MASK << 8) | 0) +// FTDI_SIO_SET_BAUDRATE +#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_BAUDRATE_REQUEST 3 -/* - * ControlValue - * B0 DTR state - * 0 = reset - * 1 = set - * B1 RTS state - * 0 = reset - * 1 = set - * B2..7 Reserved - * B8 DTR state enable - * 0 = ignore - * 1 = use DTR state - * B9 RTS state enable - * 0 = ignore - * 1 = use RTS state - * B10..15 Reserved - */ +enum ftdi_sio_baudrate { + ftdi_sio_b300 = 0, + ftdi_sio_b600 = 1, + ftdi_sio_b1200 = 2, + ftdi_sio_b2400 = 3, + ftdi_sio_b4800 = 4, + ftdi_sio_b9600 = 5, + ftdi_sio_b19200 = 6, + ftdi_sio_b38400 = 7, + ftdi_sio_b57600 = 8, + ftdi_sio_b115200 = 9 +}; -/* FTDI_SIO_SET_FLOW_CTRL */ -#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 -#define FTDI_SIO_RTS_CTS_HS (0x1 << 8) -#define FTDI_SIO_DTR_DSR_HS (0x2 << 8) -#define FTDI_SIO_XON_XOFF_HS (0x4 << 8) +// FTDI_SIO_SET_DATA +#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA +#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) +#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) +#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) +#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) +#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) +#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) // same coding as ACM +#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) // 1.5 not supported, for future use? +#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) +#define FTDI_SIO_SET_BREAK (0x1 << 14) -/* - * BmRequestType: 0100 0000b - * bRequest: FTDI_SIO_SET_FLOW_CTRL - * wValue: Xoff/Xon - * wIndex: Protocol/Port - hIndex is protocol / lIndex is port - * wLength: 0 - * Data: None - * - * hIndex protocol is: - * B0 Output handshaking using RTS/CTS - * 0 = disabled - * 1 = enabled - * B1 Output handshaking using DTR/DSR - * 0 = disabled - * 1 = enabled - * B2 Xon/Xoff handshaking - * 0 = disabled - * 1 = enabled - * - * A value of zero in the hIndex field disables handshaking - * - * If Xon/Xoff handshaking is specified, the hValue field should contain the - * XOFF character and the lValue field contains the XON character. - */ +// FTDI_SIO_MODEM_CTRL +#define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL -/* FTDI_SIO_SET_BAUD_RATE */ -/* - * BmRequestType: 0100 0000B - * bRequest: FTDI_SIO_SET_BAUDRATE - * wValue: BaudDivisor value - see below - * wIndex: Port - * wLength: 0 - * Data: None - * The BaudDivisor values are calculated as follows (too complicated): - */ +#define FTDI_SIO_SET_DTR_MASK 0x1UL +#define FTDI_SIO_SET_DTR_HIGH ((FTDI_SIO_SET_DTR_MASK << 8) | 1UL) +#define FTDI_SIO_SET_DTR_LOW ((FTDI_SIO_SET_DTR_MASK << 8) | 0UL) +#define FTDI_SIO_SET_RTS_MASK 0x2UL +#define FTDI_SIO_SET_RTS_HIGH ((FTDI_SIO_SET_RTS_MASK << 8) | 2UL) +#define FTDI_SIO_SET_RTS_LOW ((FTDI_SIO_SET_RTS_MASK << 8) | 0UL) -/* FTDI_SIO_SET_DATA */ -#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) -#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) -#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) -#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) -#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) -#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) -#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) -#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) -#define FTDI_SIO_SET_BREAK (0x1 << 14) +// FTDI_SIO_SET_FLOW_CTRL +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL +#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 +#define FTDI_SIO_RTS_CTS_HS (0x1 << 8) +#define FTDI_SIO_DTR_DSR_HS (0x2 << 8) +#define FTDI_SIO_XON_XOFF_HS (0x4 << 8) -/* - * BmRequestType: 0100 0000B - * bRequest: FTDI_SIO_SET_DATA - * wValue: Data characteristics (see below) - * wIndex: Port - * wLength: 0 - * Data: No - * - * Data characteristics - * - * B0..7 Number of data bits - * B8..10 Parity - * 0 = None - * 1 = Odd - * 2 = Even - * 3 = Mark - * 4 = Space - * B11..13 Stop Bits - * 0 = 1 - * 1 = 1.5 - * 2 = 2 - * B14 - * 1 = TX ON (break) - * 0 = TX OFF (normal state) - * B15 Reserved - * - */ +// FTDI_SIO_GET_LATENCY_TIMER +#define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER +#define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 -/* -* DATA FORMAT -* -* IN Endpoint -* -* The device reserves the first two bytes of data on this endpoint to contain -* the current values of the modem and line status registers. In the absence of -* data, the device generates a message consisting of these two status bytes - * every 40 ms - * - * Byte 0: Modem Status -* -* Offset Description -* B0 Reserved - must be 1 -* B1 Reserved - must be 0 -* B2 Reserved - must be 0 -* B3 Reserved - must be 0 -* B4 Clear to Send (CTS) -* B5 Data Set Ready (DSR) -* B6 Ring Indicator (RI) -* B7 Receive Line Signal Detect (RLSD) -* -* Byte 1: Line Status -* -* Offset Description -* B0 Data Ready (DR) -* B1 Overrun Error (OE) -* B2 Parity Error (PE) -* B3 Framing Error (FE) -* B4 Break Interrupt (BI) -* B5 Transmitter Holding Register (THRE) -* B6 Transmitter Empty (TEMT) -* B7 Error in RCVR FIFO -* -*/ -#define FTDI_RS0_CTS (1 << 4) -#define FTDI_RS0_DSR (1 << 5) -#define FTDI_RS0_RI (1 << 6) -#define FTDI_RS0_RLSD (1 << 7) +// FTDI_SIO_SET_LATENCY_TIMER +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 + +// FTDI_SIO_SET_EVENT_CHAR +#define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR +#define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 + +// FTDI_SIO_GET_MODEM_STATUS +#define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 +#define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS +#define FTDI_SIO_CTS_MASK 0x10 +#define FTDI_SIO_DSR_MASK 0x20 +#define FTDI_SIO_RI_MASK 0x40 +#define FTDI_SIO_RLSD_MASK 0x80 + +// FTDI_SIO_SET_BITMODE +#define FTDI_SIO_SET_BITMODE_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_BITMODE_REQUEST FTDI_SIO_SET_BITMODE + +// Possible bitmodes for FTDI_SIO_SET_BITMODE_REQUEST +#define FTDI_SIO_BITMODE_RESET 0x00 +#define FTDI_SIO_BITMODE_CBUS 0x20 + +// FTDI_SIO_READ_PINS +#define FTDI_SIO_READ_PINS_REQUEST_TYPE 0xc0 +#define FTDI_SIO_READ_PINS_REQUEST FTDI_SIO_READ_PINS + +// FTDI_SIO_READ_EEPROM +#define FTDI_SIO_READ_EEPROM_REQUEST_TYPE 0xc0 +#define FTDI_SIO_READ_EEPROM_REQUEST FTDI_SIO_READ_EEPROM + +#define FTDI_FTX_CBUS_MUX_GPIO 0x8 +#define FTDI_FT232R_CBUS_MUX_GPIO 0xa + +#define FTDI_RS0_CTS (1 << 4) +#define FTDI_RS0_DSR (1 << 5) +#define FTDI_RS0_RI (1 << 6) +#define FTDI_RS0_RLSD (1 << 7) + +#define FTDI_RS_DR 1 +#define FTDI_RS_OE (1 << 1) +#define FTDI_RS_PE (1 << 2) +#define FTDI_RS_FE (1 << 3) +#define FTDI_RS_BI (1 << 4) +#define FTDI_RS_THRE (1 << 5) +#define FTDI_RS_TEMT (1 << 6) +#define FTDI_RS_FIFO (1 << 7) + +// chip types and names +typedef enum ftdi_chip_type { + FTDI_SIO = 0, +// FTDI_FT232A, + FTDI_FT232B, + FTDI_FT2232C, + FTDI_FT232R, + FTDI_FT232H, + FTDI_FT2232H, + FTDI_FT4232H, + FTDI_FT4232HA, + FTDI_FT232HP, + FTDI_FT233HP, + FTDI_FT2232HP, + FTDI_FT2233HP, + FTDI_FT4232HP, + FTDI_FT4233HP, + FTDI_FTX, + FTDI_UNKNOWN +} ftdi_chip_type_t; + +#define FTDI_CHIP_NAMES \ + [FTDI_SIO] = "SIO", /* the serial part of FT8U100AX */ \ +/* [FTDI_FT232A] = "FT232A", */ \ + [FTDI_FT232B] = "FT232B", \ + [FTDI_FT2232C] = "FT2232C/D", \ + [FTDI_FT232R] = "FT232R", \ + [FTDI_FT232H] = "FT232H", \ + [FTDI_FT2232H] = "FTDI_FT2232H", \ + [FTDI_FT4232H] = "FT4232H", \ + [FTDI_FT4232HA] = "FT4232HA", \ + [FTDI_FT232HP] = "FT232HP", \ + [FTDI_FT233HP] = "FT233HP", \ + [FTDI_FT2232HP] = "FT2232HP", \ + [FTDI_FT2233HP] = "FT2233HP", \ + [FTDI_FT4232HP] = "FT4232HP", \ + [FTDI_FT4233HP] = "FT4233HP", \ + [FTDI_FTX] = "FT-X", \ + [FTDI_UNKNOWN] = "UNKNOWN" + +// private interface data +typedef struct ftdi_private { + ftdi_chip_type_t chip_type; + uint8_t channel; // channel index, or 0 for legacy types +} ftdi_private_t; + +#define FTDI_OK true +#define FTDI_FAIL false +#define FTDI_NOT_POSSIBLE -1 +#define FTDI_REQUESTED -2 -#define FTDI_RS_DR 1 -#define FTDI_RS_OE (1<<1) -#define FTDI_RS_PE (1<<2) -#define FTDI_RS_FE (1<<3) -#define FTDI_RS_BI (1<<4) -#define FTDI_RS_THRE (1<<5) -#define FTDI_RS_TEMT (1<<6) -#define FTDI_RS_FIFO (1<<7) +// division and round function overtaken from math.h +#define DIV_ROUND_CLOSEST(x, divisor)( \ +{ \ + typeof(x) __x = x; \ + typeof(divisor) __d = divisor; \ + (((typeof(x))-1) > 0 || \ + ((typeof(divisor))-1) > 0 || \ + (((__x) > 0) == ((__d) > 0))) ? \ + (((__x) + ((__d) / 2)) / (__d)) : \ + (((__x) - ((__d) / 2)) / (__d)); \ +} \ +) #endif //TUSB_FTDI_SIO_H diff --git a/src/class/cdc/serial/pl2303.h b/src/class/cdc/serial/pl2303.h new file mode 100644 index 000000000..63910c7bb --- /dev/null +++ b/src/class/cdc/serial/pl2303.h @@ -0,0 +1,159 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Heiko Kuester + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef TUSB_PL2303_H +#define TUSB_PL2303_H + +#include <stdbool.h> +#include <stdint.h> + +// There is no official documentation for the PL2303 chips. +// Reference can be found +// - https://github.com/torvalds/linux/blob/master/drivers/usb/serial/pl2303.h and +// https://github.com/torvalds/linux/blob/master/drivers/usb/serial/pl2303.c +// - https://github.com/freebsd/freebsd-src/blob/main/sys/dev/usb/serial/uplcom.c + +// quirks +#define PL2303_QUIRK_UART_STATE_IDX0 1 +#define PL2303_QUIRK_LEGACY 2 +#define PL2303_QUIRK_ENDPOINT_HACK 4 + +// requests and bits +#define PL2303_SET_LINE_REQUEST_TYPE 0x21 // class request host to device interface +#define PL2303_SET_LINE_REQUEST 0x20 // dec 32 + +#define PL2303_SET_CONTROL_REQUEST_TYPE 0x21 // class request host to device interface +#define PL2303_SET_CONTROL_REQUEST 0x22 // dec 34 +#define PL2303_CONTROL_DTR 0x01 // dec 1 +#define PL2303_CONTROL_RTS 0x02 // dec 2 + +#define PL2303_BREAK_REQUEST_TYPE 0x21 // class request host to device interface +#define PL2303_BREAK_REQUEST 0x23 // dec 35 +#define PL2303_BREAK_ON 0xffff +#define PL2303_BREAK_OFF 0x0000 + +#define PL2303_GET_LINE_REQUEST_TYPE 0xa1 // class request device to host interface +#define PL2303_GET_LINE_REQUEST 0x21 // dec 33 + +#define PL2303_VENDOR_WRITE_REQUEST_TYPE 0x40 // vendor request host to device interface +#define PL2303_VENDOR_WRITE_REQUEST 0x01 // dec 1 +#define PL2303_VENDOR_WRITE_NREQUEST 0x80 // dec 128 + +#define PL2303_VENDOR_READ_REQUEST_TYPE 0xc0 // vendor request device to host interface +#define PL2303_VENDOR_READ_REQUEST 0x01 // dec 1 +#define PL2303_VENDOR_READ_NREQUEST 0x81 // dec 129 + +#define PL2303_UART_STATE_INDEX 8 +#define PL2303_UART_STATE_MSR_MASK 0x8b +#define PL2303_UART_STATE_TRANSIENT_MASK 0x74 +#define PL2303_UART_DCD 0x01 +#define PL2303_UART_DSR 0x02 +#define PL2303_UART_BREAK_ERROR 0x04 +#define PL2303_UART_RING 0x08 +#define PL2303_UART_FRAME_ERROR 0x10 +#define PL2303_UART_PARITY_ERROR 0x20 +#define PL2303_UART_OVERRUN_ERROR 0x40 +#define PL2303_UART_CTS 0x80 + +#define PL2303_FLOWCTRL_MASK 0xf0 + +#define PL2303_CLEAR_HALT_REQUEST_TYPE 0x02 // standard request host to device endpoint + +// registers via vendor read/write requests +#define PL2303_READ_TYPE_HX_STATUS 0x8080 + +#define PL2303_HXN_RESET_REG 0x07 +#define PL2303_HXN_RESET_UPSTREAM_PIPE 0x02 +#define PL2303_HXN_RESET_DOWNSTREAM_PIPE 0x01 + +#define PL2303_HXN_FLOWCTRL_REG 0x0a +#define PL2303_HXN_FLOWCTRL_MASK 0x1c +#define PL2303_HXN_FLOWCTRL_NONE 0x1c +#define PL2303_HXN_FLOWCTRL_RTS_CTS 0x18 +#define PL2303_HXN_FLOWCTRL_XON_XOFF 0x0c + +// type data +typedef enum pl2303_type { + PL2303_TYPE_H = 0, // 0 + PL2303_TYPE_HX, // 1 + PL2303_TYPE_TA, // 2 + PL2303_TYPE_TB, // 3 + PL2303_TYPE_HXD, // 4 + PL2303_TYPE_HXN, // 5 + PL2303_TYPE_COUNT, + PL2303_TYPE_NEED_SUPPORTS_HX_STATUS, + PL2303_TYPE_UNKNOWN, +} pl2303_type_t; + +typedef struct pl2303_type_data { + uint32_t max_baud_rate; + uint8_t quirks; + uint8_t no_autoxonxoff : 1; + uint8_t no_divisors : 1; + uint8_t alt_divisors : 1; +} pl2303_type_data_t; + +#define PL2303_TYPE_DATA \ + [PL2303_TYPE_H] = { \ + .max_baud_rate = 1228800, .quirks = PL2303_QUIRK_LEGACY, \ + .no_autoxonxoff = 1, .no_divisors = 0, .alt_divisors = 0 \ + }, \ + [PL2303_TYPE_HX] = { \ + .max_baud_rate = 6000000, .quirks = 0, \ + .no_autoxonxoff = 0, .no_divisors = 0, .alt_divisors = 0 \ + }, \ + [PL2303_TYPE_TA] = { \ + .max_baud_rate = 6000000, .quirks = 0, \ + .no_autoxonxoff = 0, .no_divisors = 0, .alt_divisors = 1 \ + }, \ + [PL2303_TYPE_TB] = { \ + .max_baud_rate = 12000000, .quirks = 0, \ + .no_autoxonxoff = 0, .no_divisors = 0, .alt_divisors = 1 \ + }, \ + [PL2303_TYPE_HXD] = { \ + .max_baud_rate = 12000000, .quirks = 0, \ + .no_autoxonxoff = 0, .no_divisors = 0, .alt_divisors = 0 \ + }, \ + [PL2303_TYPE_HXN] = { \ + .max_baud_rate = 12000000, .quirks = 0, \ + .no_autoxonxoff = 0, .no_divisors = 1, .alt_divisors = 0 \ + } + +typedef struct TU_ATTR_PACKED { + pl2303_type_t type; + uint8_t quirks; + bool supports_hx_status; +} pl2303_private_t; + +// buffer sizes for line coding data +#define PL2303_LINE_CODING_BUFSIZE 7 +#define PL2303_LINE_CODING_BAUDRATE_BUFSIZE 4 + +// bulk endpoints +#define PL2303_OUT_EP 0x02 +#define PL2303_IN_EP 0x83 + +#endif // TUSB_PL2303_H |