diff options
Diffstat (limited to 'src/class/msc/msc_host.h')
| -rw-r--r-- | src/class/msc/msc_host.h | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h index 9fda566d8..09d777066 100644 --- a/src/class/msc/msc_host.h +++ b/src/class/msc/msc_host.h @@ -73,10 +73,12 @@ uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun); // Perform a full SCSI command (cbw, data, csw) in non-blocking manner. // Complete callback is invoked when SCSI op is complete. // return true if success, false if there is already pending operation. +// NOTE: buffer must be accessible by USB/DMA controller, aligned correctly and multiple of cache line if enabled bool tuh_msc_scsi_command(uint8_t daddr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); // Perform SCSI Inquiry command // Complete callback is invoked when SCSI op is complete. +// NOTE: response must be accessible by USB/DMA controller, aligned correctly and multiple of cache line if enabled bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); // Perform SCSI Test Unit Ready command @@ -85,14 +87,17 @@ bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_ // Perform SCSI Request Sense 10 command // Complete callback is invoked when SCSI op is complete. +// NOTE: response must be accessible by USB/DMA controller, aligned correctly and multiple of cache line if enabled bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); // Perform SCSI Read 10 command. Read n blocks starting from LBA to buffer // Complete callback is invoked when SCSI op is complete. +// NOTE: buffer must be accessible by USB/DMA controller, aligned correctly and multiple of cache line if enabled bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); // Perform SCSI Write 10 command. Write n blocks starting from LBA to device // Complete callback is invoked when SCSI op is complete. +// NOTE: buffer must be accessible by USB/DMA controller, aligned correctly and multiple of cache line if enabled bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); // Perform SCSI Read Capacity 10 command @@ -116,7 +121,7 @@ TU_ATTR_WEAK void tuh_msc_umount_cb(uint8_t dev_addr); bool msch_init (void); bool msch_deinit (void); bool msch_open (uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *desc_itf, uint16_t max_len); -bool msch_set_config (uint8_t dev_addr, uint8_t itf_num); +bool msch_set_config (uint8_t daddr, uint8_t itf_num); void msch_close (uint8_t dev_addr); bool msch_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes); |