diff options
Diffstat (limited to 'src/class')
| -rw-r--r-- | src/class/msc/msc_device.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/src/class/msc/msc_device.c b/src/class/msc/msc_device.c index 728f4d363..4585d520a 100644 --- a/src/class/msc/msc_device.c +++ b/src/class/msc/msc_device.c @@ -412,7 +412,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t p_msc->stage = MSC_STAGE_STATUS;
tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // Sense = Invalid Command Operation
- dcd_edpt_stall(rhport, p_msc->ep_in);
+ usbd_edpt_stall(rhport, p_msc->ep_in);
}
}
}
@@ -512,7 +512,7 @@ bool mscd_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t event, uint32_t if ( p_msc->stage == MSC_STAGE_STATUS )
{
// Either endpoints is stalled, need to wait until it is cleared by host
- if ( dcd_edpt_stalled(rhport, p_msc->ep_in) || dcd_edpt_stalled(rhport, p_msc->ep_out) )
+ if ( usbd_edpt_stalled(rhport, p_msc->ep_in) || usbd_edpt_stalled(rhport, p_msc->ep_out) )
{
// simulate an transfer complete with adjusted parameters --> this driver callback will fired again
dcd_event_xfer_complete(rhport, p_msc->ep_out, 0, XFER_RESULT_SUCCESS, false);
@@ -573,7 +573,7 @@ static void proc_read10_cmd(uint8_t rhport, mscd_interface_t* p_msc) p_csw->status = MSC_CSW_STATUS_FAILED;
tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_ILLEGAL_REQUEST, 0x20, 0x00); // Sense = Invalid Command Operation
- dcd_edpt_stall(rhport, p_msc->ep_in);
+ usbd_edpt_stall(rhport, p_msc->ep_in);
}
else if ( nbytes == 0 )
{
@@ -599,7 +599,7 @@ static void proc_write10_cmd(uint8_t rhport, mscd_interface_t* p_msc) p_csw->status = MSC_CSW_STATUS_FAILED;
tud_msc_set_sense(p_cbw->lun, SCSI_SENSE_DATA_PROTECT, 0x27, 0x00); // Sense = Write protected
- dcd_edpt_stall(rhport, p_msc->ep_out);
+ usbd_edpt_stall(rhport, p_msc->ep_out);
return;
}
|